PLGA微球的制备及其用于脉冲给药的初步研究

目的：制备聚乳酸-羟基乙酸共聚物（PLGA）微球,并考察其用于脉冲式释药系统的可行性。方法：以牛血清白蛋白（BSA）为模型药物,用S/O/W（Solid-in-oil-in-water）法和S/O/O（Solid-in-oil-in-oil）法制备PLGA（75：25）和PLGA（50：50）微球,比较2种方法制备的微球的表面形态、包封率及载药量等,并考察2种微球的体外释放行为。结果：S/O/W法和S/O/O法制备的微球均圆整、无粘连、形态良好,但S/O/W法制备的微球表面较为平整,而S/O/O法表面均匀分布有较大的凹陷。S/O/W法制备的PLGA（75：25）和PLGA（50：50）微球包封率分别为（60.15±5.95）%、（49.50±3.69）%,载药量分别为（2.56±0.25）%、（2.10±0.16）%,10h内药物释放均为10%左右,而后随着聚合物的降解药物的释放量突然增加;S/O/O法所制微球包封率分别为（84.36±1.11）%、（77.94±1.42）%,载药量分别为（3.58±0.05）%、（3.31±0.06）%,24h内药物释放均可达50%左右,而后呈现较为平稳的释放行为。S/O/O法制备的微球包封率及载药量均较S/O/W法高;S/O/W法制备的PLGA微球药物释放呈现一定的脉冲行为,其中PLGA（75：25）微球体外释放行为受微球粒径的影响较大。结论：S/O/W法制备的PLGA微球具有一定的脉冲式释药效果,微球的粒径最好控制在120μm以下。     

中药提取物葫芦素B-PLGA微球的制备及处方工艺优化

目的:制备中药提取物葫芦素(Cuc)B-乳酸-羟基乙酸共聚物(PLGA)微球。方法:应用改良的乳化溶剂挥发法制备微球;采用星点设计-效应面法优化制备工艺,以聚乙烯醇(PVA)浓度和投药比为自变量,微球的产率(Y1)、载药量(Y2)、包封率(Y3)、粒径(Y4)、24h累积释放量(Y5)为指标,进行多元线性回归和二次多项式拟合;改良的直接释药法考察微球的体外释放情况。结果:Y1、Y2、Y3、Y4、Y5二次多项式方程拟合效果较好,较优的工艺条件为PVA浓度0.014,投药比0.066 5。制得的微球形态圆整,Y1、Y2、Y3、Y4、Y5分别为79.9%、7.83%、80.5%、56.18μm、6.98%。体外释放35d的累积释放量为86.73%。结论:制备的CucB-PLGA微球满足了长效缓释的要求,所建立的模型预测性良好。     

Effects of formulation factors on encapsulation efficiency and release behaviour in vitro of huperzine A-PLGA microspheres

To develop a long-acting injectable huperzine A-PLGA microsphere for the chronic therapy of Alzheimer's disease, the microsphere was prepared by using an o/w emulsion solvent extraction evaporation method based on a series of formulation design of the emulsion. The dialysis method was used for release analysis. The encapsulation efficiency and release amount of the microspheres were determined by a UV/VIS spectrophotometer. The morphology of the microspheres was observed by scanning electron microscopy. The distribution of the drug within microspheres was observed by a confocal laser scanning microscope. The results indicated that the PLGA 15?000 microspheres possessed a smooth and round appearance with average particle size of 50?µm or so. The encapsulation percentages of microspheres prepared from PLGA 15?000, 20?000 and 30?000 were 62.75%, 27.52% and 16.63%, respectively. The drug release percentage during the first day decreased from 22.52% of PLGA 30?000 microspheres to 3.97% of PLGA 15?000 microspheres, the complete release could be prolonged to 3 weeks. The initial burst release of microspheres with higher molecular weight PLGA could be explained by the inhomogeneous distribution of drug within microspheres. The encapsulation efficiency of the microspheres improved as the polymer concentration increased in the oil phase and PVA concentration decreased in the aqueous phase. The burst release could be controlled by reducing the polymer concentration. Evaporation temperature had a large effect on the drug release profiles. It had better be controlled under 30°C. Within a certain range of particle size, encapsulation efficiency decreased and drug release rate increased with the reducing of the particle size.     

Effects of formulation factors on encapsulation efficiency and release behaviour in vitro of huperzine A-PLGA microspheres

To develop a long-acting injectable huperzine A-PLGA microsphere for the chronic therapy of Alzheimer's disease, the microsphere was prepared by using an o/w emulsion solvent extraction evaporation method based on a series of formulation design of the emulsion. The dialysis method was used for release analysis. The encapsulation efficiency and release amount of the microspheres were determined by a UV/VIS spectrophotometer. The morphology of the microspheres was observed by scanning electron microscopy. The distribution of the drug within microspheres was observed by a confocal laser scanning microscope. The results indicated that the PLGA 15,000 microspheres possessed a smooth and round appearance with average particle size of 50 microm or so. The encapsulation percentages of microspheres prepared from PLGA 15,000, 20,000 and 30,000 were 62.75%, 27.52% and 16.63%, respectively. The drug release percentage during the first day decreased from 22.52% of PLGA 30,000 microspheres to 3.97% of PLGA 15,000 microspheres, the complete release could be prolonged to 3 weeks. The initial burst release of microspheres with higher molecular weight PLGA could be explained by the inhomogeneous distribution of drug within microspheres. The encapsulation efficiency of the microspheres improved as the polymer concentration increased in the oil phase and PVA concentration decreased in the aqueous phase. The burst release could be controlled by reducing the polymer concentration. Evaporation temperature had a large effect on the drug release profiles. It had better be controlled under 30 degrees C. Within a certain range of particle size, encapsulation efficiency decreased and drug release rate increased with the reducing of the particle size.     

Effects of formulation factors on encapsulation efficiency and release behaviour in vitro of huperzine A-PLGA microspheres

To develop a long-acting injectable huperzine A-PLGA microsphere for the chronic therapy of Alzheimer's disease, the microsphere was prepared by using o/w emulsion solvent extraction evaporation method based on a series of formulation design of the emulsion. The dialysis method was used for release analysis. The encapsulation efficiency and release amount of the microspheres were determined by UV/VIS spectrophotometry. The morphology of the microspheres was observed by scanning electron microscopy. The distribution of the drug within microspheres was observed by a confocal laser scanning microscope. The results indicated that the PLGA 15 000 microspheres possessed a smooth and round appearance with average particle size of 50 microm or so. The encapsulation percentages of microspheres prepared from PLGA 15 000, 20 000 and 30 000 were 62.75, 27.52 and 16.63%, respectively. The drug release percentage during the first day decreased from 22.52% of PLGA 30 000 microspheres to 3.97% of PLGA 15 000 microspheres, the complete release could be prolonged to 3 weeks. The initial burst release of microspheres with higher molecular weight PLGA could be explained by the inhomogeneous distribution of drug within microspheres. The encapsulation efficiency of the microspheres improved as the polymer concentration increase in oil phase and PVA concentration decreased in aqueous phase. The burst release could be controlled by reducing the polymer concentration. Evaporation temperature had a large effect on the drug release profiles. It had better be controlled under 30 degrees C. Within a certain range of particle size, encapsulation efficiency decreased and drug release rate increased with the reducing of the particle size.     

不同PLGA型号对奥曲肽微球的包封率和体外释放行为的影响

考察了不同型号聚乳酸-羟基乙酸共聚物(PLGA)作为水溶性药物奥曲肽微球载体对载药量、包封率和体外释放行为的影响.结果表明,PLGA中丙交酯含量降低,载药量和包封率降低,而突释量增大.PLGA型号相同时,黏度较大的PLGA微球载药量和包封率较高,突释量较小.采用PLGA与聚乳酸(PLA)混合材料制备的微球比单用PLGA材料微球的突释量小、载药量和包封率高、缓释效果好.     

Sustained release of low molecular weight heparin from PLGA microspheres prepared by a solid-in-oil-in-water emulsion method

Biodegradable poly(lactic-co-glycolic acid) (PLGA) microspheres for the sustained release of low molecular weight heparin (LMWH) were prepared by a soild-in-oil-in-water (s/o/w) emulsion method. Prior to encapsulation, the LMWH micro-particles were fabricated by a modified freezing-induced phase separation method. The micro-particles were subsequently encapsulated into PLGA microspheres. Process optimization revealed that the NaCl concentration in the outer phase of s/o/w emulsion played a critical role in determining the properties of the microspheres. When the NaCl concentration increased from 0% to 5%, the encapsulation efficiency significantly increased from 51.5% to 76.8%. The initial burst release also decreased from 37.3% to 12.4%. In?vitro release tests showed that LMWH released from PLGA microspheres in a sustained manner for about 14 days. Single injection of LMWH-loaded PLGA microspheres into rabbits resulted in an elevation of an anti-factor Xa activity for about 6 days. Furthermore, the integrity of the encapsulated LMWH was preserved during encapsulation process.     

Kinetics of a Model Nucleoside (Guanosine) Release from Biodegradable Poly(dl-lactide-co-glycolide) Microspheres: A Delivery System for Long-Term Intraocular Delivery

The objective of this study was to prepare poly(dl-lactide-co-glycolide)(PLGA) microspheres containing guanosine as a model drug for intraocular administration. Microspheres were prepared by solvent evaporation technique using o/w emulsion system. The influence of composition and molecular weight of PLGA, drug loading efficiency, microsphere size, and in vitro and in vivo release rates were determined. Differential scanning calorimetry (DSC) and FTIR studies were conducted to examine the guanosine–polymer interaction. In vitro release studies indicated that the permeant release from microspheres exhibits an initial burst followed by slow first-order kinetics. Ascending molecular weights of the polymers generated progressively slower release rates. Three different sizes of microspheres were prepared. The release continued for 7 days with a maximum of 70% of the content released within that time period. DSC and FTIR studies showed no polymer–guanosine interaction. A novel microdialysis technique was used to examine the initial release kinetics from microspheres in isolated vitreous humor. This technique was also employed to observe in vivo intravitreal release in albino rabbits. A good correlation exists between in vitro and in vivo release rates from both 75 and 140 kDa PLGA microspheres. Guanosine-loaded microspheres could be prepared for once-a-week intravitreal injection with minimum required concentration maintained throughout the dosing interval. Because the structural and solubility characteristics of guanosine are similar to those of acyclovir and ganciclovir (two acycloguanosine analogues effective against herpes simplex virus [HSV-1] and cytomegalovirus [CMV], respectively), similar biodegradable polymer-based microsphere technology can be employed for the long-term intraocular delivery of these two drugs.     

Comparative study of some biodegradable polymers on the entrapment efficiency and release behavior of etoposide from microspheres

Etoposide-loaded biodegradable microspheres of poly lactic-co-glycolide (PLGA) 50:50, PLGA 75:25, and polycaprolactone (PCL) were prepared by simple o/w emulsification solvent evaparation method and characterized by size analysis and microscopy. The influence of drug to polymer ratio on the entrapment of etoposide was studied. Of all the three types of microspheres, polycaprolactone microspheres (PCL MS) showed the highest entrapment efficiency (94.64%), followed by PLGA 75:25 microspheres (PLGA 75:25 MS) (88.64%) and PLGA 50:50 microspheres (PLGA 50:50 MS) (79.19%). The drug to polymer ratio of 1:20 gave the highest entrapment efficiency for all the three types of microspheres. The in vitro release of etoposide from the three microsphere formulations were studied in phosphate buffer pH 7.4 (pH 7.4 PB) containing 0.1% Tween 80. The microspheres showed an initial burst release, which was highest from the PLGA 50:50 MS and least from the PCL MS. PCL MS microspheres showed the lower and slow drug release than the remaining formulations. The release of etoposide from all the three microsphere formulations followed Higuchi's diffusion pattern. The microspheres in the dissolution medium for 28 days appeared irregular in shape and slightly fragmented.     

beta-Estradiol biodegradable microspheres: effect of formulation parameters on encapsulation efficiency and in vitro release

The purpose of this work was to study the effect of organic solvent and surfactant type on the in vitro release behavior in general and on the burst release in particular of beta-estradiol from PLA/PLGA microspheres. Also the effect of these variables on the encapsulation efficiency was investigated. The microspheres were prepared by solvent evaporation technique using dichloromethane (DCM), ethyl acetate (EtAc), tetrahydrofuran (THF), chloroform (CHCl3) or acetone (AC) as organic solvent and polyvinyl alcohol (PVA), Tween 80, sodium lauryl sulfate (SLS) or benzalkonium chloride (BKCI) as surfactant. The obtained microspheres were tested for encapsulation efficiency and in vitro drug release using 50% methanol/buffer pH 7.4 as dissolution medium. EtAC and PVA formulations showed the highest encapsulation efficiency and the lowest burst release. These microspheres were further characterized for particle size distribution, SEM and zeta potential. The results suggested that these materials could be starting materials to prepare a beta-estradiol biodegradable controlled delivery system.     

Formulation and in-vitro characterization of retinoic acid loaded poly (lactic-co-glycolic acid) microspheres

Poly (lactic-co-glycolic acid) (PLGA) microspheres containing all-trans retinoic acid (atRA) were prepared by emulsion/solvent evaporation technique. PLGA (50:50) with inherent viscosities of 0.17 and 0.39 dL g(-1) was used. Polyvinyl alcohol (PVA) or PVA and sodium oleate (SO) combinations (4:1) were used to stabilize the emulsions. The effect of polymer viscosity, emulsifier type and concentration on the in vitro release of atRA from the microspheres was investigated. The stability of the microparticles was also tested at the temperatures of 4, 25 and 40 degrees C. The particle size ranged between 1-2 microm. Microspheres were smooth and spherical in shape, as determined by scanning electron microscope (SEM) photographs. The yield of microspheres ranged from 50-75% and the encapsulation efficiency was determined between 45-75%. In vitro release studies showed that atRA release from microspheres lasted for 11 days.     

Effects of process and formulation parameters on characteristics and internal morphology of poly(d,l-lactide-co-glycolide) microspheres formed by the solvent evaporation method.

Taking ABT627 as a hydrophobic model drug, poly-(lactic-co-glycolic acid) (PLGA) microspheres were prepared by an emulsion solvent evaporation method. Various process parameters, such as continuous phase/dispersed phase (CP/DP) ratio, polymer concentration, initial drug loading, polyvinyl alcohol concentration and pH, on the characteristics of microspheres and in vitro drug release pattern of ABT627 were investigated. Internal morphology of the microspheres was observed with scanning electron microscopy by stereological method. CP/DP is a critical factor in preparing microspheres and drug loading increased significantly with increasing CP/DP ratios accompanied by a remarkably decreased burst release. At CP/DP ratio 20, microspheres with a core-shell structure were formed and the internal porosity of the microspheres decreased with increasing CP/DP ratio. Increase in PLGA concentration led to increased particle sizes and decreased drug release rates. ABT627 release rate increased considerably with increasing PVA concentrations in the continuous phase from 0.1% to 0.5%. The maximum solubility of ABT627 in PLGA was approximately 30%, under which ABT627 was dispersed in PLGA matrix in a molecular state. Increase in initial drug loading had no significant influence on particle size, drug encapsulation efficiency, burst release and internal morphology. However, drug release rate decreased at higher drug loading. Independent of process parameters, ABT627 was slowly released from the PLGA microspheres over 30 days, by a combination of diffusion and polymer degradation. During the first 13 days, ABT627 was mainly released by the mechanism of diffusion demonstrated by the unchanged internal morphology. In contrast, a core-shell structure of the microspheres was observed after being incubated in the release medium for 17 days, independent of drug loading, implying that the ABT627/PLGA microspheres degraded by autocatalytic effect, starting from inside of the matrix. In conclusion, hydrophobic drug release from the PLGA microspheres is mainly dependent on the internal morphology and drug distribution state in the microspheres.     

Gentamicin encapsulation in PLA/PLGA microspheres in view of treating Brucella infections

In view of treating intracellular Brucella infections, microspheres made of poly(lactide) (PLA) and poly(lactide-co-glycolide) (PLGA) were developed as delivery system for the cationic and highly hydrophilic antibiotic gentamicin sulphate. Drug microencapsulation by spray drying yielded microspheres with regular morphology, an average particle size of approximately 3 micrometer and encapsulation efficiencies of up to 45%. Different copolymers of similar molecular weights gave varying encapsulation efficiencies and particle size distributions. The encapsulation efficiency generally increased with polymer hydrophilicity, except for the hydrophilic copolymer PLGA50:50H carrying carboxylic end groups. Encapsulation also depended on the pH value of the aqueous drug solution to be encapsulated. Moreover, increasing nominal gentamicin sulphate loading yielded lower efficiencies. For comparison, some formulations were also prepared by a (W(1)/O)W(2)-solvent evaporation method, which yielded lower encapsulation efficiencies, in the order of 13%. Finally, drug bioactivity was found to remain intact after microencapsulation, MS storage and MS incubation in aqueous medium. The results suggest that PLA/PLGA microspheres prepared by spray drying may be an appropriate delivery system for gentamicin sulphate to be used in the treatment of intracellular Brucella infections.     

Microspheres made by w/o/o emulsion method with reduced initial burst for long-term delivery of endostar, a novel recombinant human endostatin

The purpose of this work is to design biodegradable Poly(lactide-co-glycolide) (PLGA) microspheres with low initial burst for sustained delivery of Endostar (a novel recombinant human endostatin) and investigate effects of PLGA molecular weight and composition on the release behavior of Endostar microspheres. Endostar microspheres were prepared by using novel w/o/o multiple emulsification-evaporation technique. Effects of polymer molecular weight and copolymer composition on particle properties and release behavior (in vitro and in vivo) have been reported. Drug release in vitro decreased with increase in molecular weight and lactide content of PLGA. Zero order release and low initial burst were obtained with all microsphere formulations. The in vivo performance of Endostar microspheres were also found to be dependent on the polymer molecular weight and copolymer composition. Together, these results suggest that the initial burst release can be reduced by w/o/o emulsion method and the release of Endostar can be changed significantly by varying the polymer molecular weight and copolymer composition.     

Development of a single dose tetanus toxoid formulation based on polymeric microspheres: a comparative study of poly(D,L-lactic-co-glycolic acid) versus chitosan microspheres

Stable polymeric microspheres capable of controlled release of tetanus toxoid (TT) for periods ranging from days to over months were developed. TT was stabilized, encapsulated in microspheres prepared from poly(D,L)-lactide-co-glycolide (PLGA) and chitosan by using protein stabilizer (trehalose) and its immune response was compared. The influence of co-encapsulated protein stabilizer on tetanus toxoid's stability and release from the microspheres was studied. The protein stabilizer (trehalose) prevented structural losses and aggregation of microencapsulated TT. To neutralize the acids liberated by the biodegradable lactic/glycolic acid-based polymer, we also co-incorporated into the polymer an antacid, (Mg(OH)2), which neutralized the acidity during degradation of the polymer and also prevented TT structural losses and aggregation. The in vitro release experiments with PLGA and chitosan microspheres were performed and the release of TT was increased up to 80-90%. The antigen integrity was investigated by sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) followed by coomassie brilliant blue staining. The SDS-PAGE analysis confirmed that antigen integrity was not affected by the encapsulation procedure. In addition, the immunogenicity of PLGA and chitosan microspheres based single dose vaccine was evaluated in guinea pigs and compared with multiple doses of alum adsorbed TT. Results indicated that a single injection of PLGA and chitosan microspheres containing TT could maintain the antibody response at a level comparable to the booster injections of conventional alum adsorbed vaccines. The both PLGA and chitosan based stable vaccine formulations produced an equal immune response. Hence chitosan can be used to replace the expensive polymer PLGA. This approach should have potential application in the field of vaccine delivery.     

Formulation, characterization, and evaluation of ketorolac tromethamine-loaded biodegradable microspheres

Ketorolac tromethamine has to be given every 6 hr intramuscularly in patients for acute pain, so to avoid frequent dosing and patient inconvenience we found it to be a suitable candidate for parenteral controlled delivery by biodegradable microspheres for the present study. Ketorolac tromethamine-loaded microspheres were prepared by o/w emulsion solvent evaporation technique using different polymers: polycaprolactone, poly lactic-co-glycolic acid (PLGA 65/35), and poly lactic-co-glycolic acid (PLGA 85/15). To tailor the release profile of drug for several days, blends of PLGA 65/35 and PLGA 85/15 were prepared with polycaprolactone (PCL) in different ratios. The results revealed that microspheres made with 1:3 (PLGA65/35: PCL) blend released 97% of the drug in 5 days as compared with 97% in 30 days in with pure PLGA65/35 microspheres. Microspheres made with 1:1 (PLGA65/35:PCL) and 3:1 (PLGA65/35:PCL released 98% of the drug in 30 days. In microspheres made with 1:3 (PLGA85/15:PCL), almost the entire drug was released in a week whereas in batches made with pure PLGA85/15 and 3:1 (PLGA 85/15:PCL) more than 80% of the drug was released in 60 days as compared with 96% in 60 days in 1:1 (PLGA85/15:PCL). Higher encapsulation efficiency was obtained with microspheres made with pure PLGA 65/35. These formulations were characterized for particle size analysis by Malvern mastersizer that revealed particle size in range of 12-15 micron and 12-22 micron for microspheres made with polymer blends of PLGA 65/35:PCL and PLGA85/15:PCL, respectively. In with pure PLGA65/35 and PLGA85/15, particle size was 28 micron and 8 micron, respectively. Surface topography was studied by scanning electron microscopy that revealed a spherical shape of microspheres. From our study it we concluded that with careful selection of different polymers and their combinations, we can tailor the release of ketorolac tromethamine for long periods.     

牛血清白蛋白阳离子微球的制备及体外评价

目的制备牛血清白蛋白（BSA）口服阳离子微球,考察天然阳离子物质壳聚糖（CHS）的加入对蛋白微球的粒径、电动电势、包封率、载药量及体外释放情况的影响。方法以乳酸／羟基乙酸共聚物（PLGA）和壳聚糖（CHS）为载体材料,采用W／O／W复乳-溶剂挥发法制备牛血清白蛋白乳酸／羟基乙酸共聚物-壳聚糖（PLGA／CHS）阳离子微球。通过正交设计优化制备工艺,确定最佳处方。建立准确而简便的蛋白含量测定方法,并对微球进行体外评价。结果最佳处方为：BSA浓度为150g·L^-1、PLGA浓度为8％、外水相体积为80mL、壳聚糖浓度为0．2％。制得的微球形态圆整,平均粒径为（6．9±5．5）μm,为表面荷正电的阳离子微球[ζ电势=00．0±0．6）mV],包封率为（75．4±4．6）％,载药量为（9．3±0．2）％。体外释放结果表明,在模拟胃液和模拟肠液中,壳聚糖的加入均能减少突释,延缓药物的释放。结论与PLGA微球相比,制得的PLGA／CHS阳离子微球表面带正电,具有较高的包封率和载药量,可以延缓药物释放,同时减少突释现象。     

Sustained release of low molecular weight heparin from PLGA microspheres prepared by a solid-in-oil-in-water emulsion method

Biodegradable poly(lactic-co-glycolic acid) (PLGA) microspheres for the sustained release of low molecular weight heparin (LMWH) were prepared by a soild-in-oil-in-water (s/o/w) emulsion method. Prior to encapsulation, the LMWH micro-particles were fabricated by a modified freezing-induced phase separation method. The micro-particles were subsequently encapsulated into PLGA microspheres. Process optimization revealed that the NaCl concentration in the outer phase of s/o/w emulsion played a critical role in determining the properties of the microspheres. When the NaCl concentration increased from 0% to 5%, the encapsulation efficiency significantly increased from 51.5% to 76.8%. The initial burst release also decreased from 37.3% to 12.4%. In vitro release tests showed that LMWH released from PLGA microspheres in a sustained manner for about 14 days. Single injection of LMWH-loaded PLGA microspheres into rabbits resulted in an elevation of an anti-factor Xa activity for about 6 days. Furthermore, the integrity of the encapsulated LMWH was preserved during encapsulation process.     

Preparation and in vitro characterization of vascular endothelial growth factor (VEGF)-loaded poly(D,L-lactic-co-glycolic acid) microspheres using a double emulsion/solvent evaporation technique

Biodegradable Poly(lactic-co-glycolic acid; PLGA), microspheres encapsulating the angiogenic protein recombinant human vascular endothelial growth factor (rhVEGF) were formed to achieve VEGF release in a sustained manner. These microspheres are a promising delivery system which can be used for therapeutic angiogenesis. The PLGA microspheres incorporating two different initial loading amounts of rhVEGF have been prepared by a modified water-in-oil-in-water (w/o/w) double emulsion/solvent evaporation technique. The microspheres have been characterized by particle size distribution, environmental scanning electron microscopy (ESEM), light microscopy, encapsulation efficiency and their degradation was studied in?vitro. The rhVEGF released from microspheres was quantified by the competitive enzyme-linked immunosorbent assay (ELISA) and human umbilical vein endothelial cell (HUVEC) proliferation assay was used to assess biological activity of the released VEGF. The microspheres were spherical with diameters of 10-60?μm and the encapsulation efficiency was between 46% and 60%. The release kinetics of rhVEGF was studied for two different amounts: 5?μg VEGF (V5) and 50?μg VEGF (V50) per 500?mg starting polymer. The total protein (VEGF:BSA) release increased up to 4 weeks for two rhVEGF concentrations. The ELISA results showed that the burst release for V5 and V50 microspheres were 4 and 27?ng/mL, respectively. For V5, the microspheres showed an initial burst release, followed by a higher steady-state release until 14 days. VEGF release increased up to 2 weeks for V50 microsphere. HUVEC proliferation assay showed that endothelial cells responded to bioactive VEGF by proliferating and migrating.     

GM-1PLGA肌注微球的制备及其体外释药评价

目的 研究以聚乳酸羟基乙酸共聚物为囊材,制备长效缓释的单唾液酸四己糖神经节苷脂微球制剂.方法运用复乳溶剂挥发法,考虑多个条件对制备工艺的影响,并采用正交设计对处方进行优化.测定微球的载药量、包封率和释放曲线.结果制备得到的GM-1微球粒径大小均匀,球形致密圆整,微球粒径为(8.2±6.0)μm,载药量和包封率分别为18...