Formulation,Characterization, and In Vitro Evaluation of Bioadhesive Gels Containing 5-Fluorouracil

The objective of this study was to prepare and evaluate in vitro the bioadhesive gels of 5-Fluorouracil (FU) for the treatment of oropharyngeal cancer. In preformulation study, the physicochemical interactions between FU and polymers were investigated by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectrophotometry, and differential scanning calorimetry (DSC). According to FTIR, XRD, and DSC studies, the drug did not show any evidence of an interaction with the polymers used and was present in an unchanged state. The gel formulations containing FU were prepared by using Poloxamer 407, HPMC K 15 M, and Gantrez® S-97 (polymethylvinylether-co-maleic anhydride). The formulations contained Poloxamer 407 (16–18% w/w) either alone or in combination with HPMC K 15 M and Gantrez® S-97. The bioadhesiveness of the gels was found to increase with increasing proportion of HPMC K 15 M and Gantrez® S-97. In vitro release studies indicated that release could be sustained up to 8 hr. The permeability coefficients (Kp) of gel across cellulose membrane and buccal mucosal membrane were 1.06 × 10^?4 cm/s and 3.94 × 10^?5 cm/s, respectively, and differed significantly (p < 0.05). Increasing temperature increased the drug release by increasing drug diffusion despite increase in viscosity. The pH of the release medium showed a very slight effect on the release of FU. Mathematical modeling of in vitro dissolution data indicated the best fitting with Korsemeyer–Peppas model and the drug release kinetics primarily as non-Fickian diffusion.     

Formulation, characterization, and in vitro evaluation of bioadhesive gels containing 5-Fluorouracil

The objective of this study was to prepare and evaluate in vitro the bioadhesive gels of 5-Fluorouracil (FU) for the treatment of oropharyngeal cancer. In preformulation study, the physicochemical interactions between FU and polymers were investigated by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectrophotometry, and differential scanning calorimetry (DSC). According to FTIR, XRD, and DSC studies, the drug did not show any evidence of an interaction with the polymers used and was present in an unchanged state. The gel formulations containing FU were prepared by using Poloxamer 407, HPMC K 15 M, and Gantrez S-97 (polymethylvinylether-co-maleic anhydride). The formulations contained Poloxamer 407 (16-18% w/w) either alone or in combination with HPMC K 15 M and Gantrez S-97. The bioadhesiveness of the gels was found to increase with increasing proportion of HPMC K 15 M and Gantrez S-97. In vitro release studies indicated that release could be sustained up to 8 hr. The permeability coefficients (Kp) of gel across cellulose membrane and buccal mucosal membrane were 1.06 x 10(-4) cm/s and 3.94 x 10(-5) cm/s, respectively, and differed significantly ( p < 0.05). Increasing temperature increased the drug release by increasing drug diffusion despite increase in viscosity. The pH of the release medium showed a very slight effect on the release of FU. Mathematical modeling of in vitro dissolution data indicated the best fitting with Korsemeyer-Peppas model and the drug release kinetics primarily as non-Fickian diffusion.     

Development and in vitro evaluation of insulin-loaded buccal Pluronic F-127 gels

Insulin-loaded buccal Pluronic F-127 (PF-127) gel formulations were fabricated to study the effect of PF-127 concentration, insulin concentration, presence of salt, addition of polymer, and permeation enhancer on their gelation time, mucoadhesion force, release and permeation characteristics of insulin from the gels. Thereafter, the principle of statistical optimization to prepare a gel formulation having the potential for buccal delivery of basal insulin in diabetic patients was employed. The gelation time decreased as the concentration of PF-127 increased. Presence of salts as well as addition of polymer, such as methyl cellulose (MC) and hydroxypropylmethyl cellulose (HPMC) decreased the gelation time. An increase in PF-127 concentration and addition of MC and HPMC increased the mucoadhesion force of the gel formulations. Release and permeation of insulin from the gel formulations decreased with increased concentration of PF-127, presence of salts, and addition of MC and HPMC. Permeation of insulin from the optimized gel formulation was 93.17 (± 0.058, n?=?3)?μg/cm² which was not only found in close agreement with predicted results from the model equations used for the formulation optimization but also considered comparable to clinical setting. Therefore, the development of optimized buccal insulin-loaded Pluronic F-127 gels using a statistical experimental design is feasible.     

Buccoadhesive gels of glibenclamide: A means for achieving enhanced bioavailability

The aim of the present study was to formulate and evaluate buccoadhesive gels of model drug, glibenclamide indented as an alternate route of drug delivery to have enhanced bioavailability. The buccoadhesive gels were prepared by solution polymerization technique containing Hydroxy Propyl Methyl Cellulose (HPMC, E15 LV) and Carbopol (CP, 934P). An apparatus, simulating the in-vivo conditions of the mouth was designed in order to assess in-vitro release kinetics of the prepared gels. The gels were also evaluated for buccoadhesive strength, hydration, and swelling index, and viscosity. In-vivo evaluation for pharmacodynamic and pharmacokinetic properties of the optimized gel was done in rabbits. The drug release of buccoadhesive gels through rabbit buccal mucosa increased significantly (p?<?0.05) by the use of penetration enhancers. The release kinetics followed Higuchi model with release mechanism being Fickian diffusion. In-vivo results of the optimized gel (2% CP: 2% HPMC) revealed that the gel successfully prevented severe hypoglycemia, showed sustained action, and enhanced relative bioavailability with and without penetration enhancers as compared to the marketed formulation. The buccoadhesive gels could possibly be a means for alternative dosage form in avoiding first pass metabolism and ensuring enhanced bioavailability for glibenclamide.     

Development of mucoadhesive buccal films for the treatment of oral sub-mucous fibrosis: a preliminary study

The objective of the present study was to develop the mucoadhesive buccal film of valdecoxib for the treatment of oral sub mucous fibrosis, a localized buccal disease. Valdecoxib, a novel COX-2 inhibitor has been reported to be used in various osteopathic and rheumatoid conditions as oral therapy. The films were made out of chitosan and HPMC K4M as polymers. Sodium taurocholate was used as a permeation enhancer. All the formulations were examined for film thickness, swelling properties, drug content, weight variation, in vitro release studies, bioadhesive force, tensile strength, diffusion studies using pig mucosa and pharmacokinetic study in healthy male volunteers. Prepared films were thin, flexible, smooth and transparent. Bioadhesive force and tensile strength of the optimized formulation were found to be 75 ± 4 kg m^?1 S^?2 and more than 2.5 kg/3 cm², respectively. The percent drug content was 98.5 ± 1.3%. The in vitro drug release from the selected formulation showed that about 69.34% of the drug payload was released up to 6 hours. The drug permeation through the dialysis sac and pig buccal mucosa was found to be 62.70% and 54.39%, respectively. Pharmacokinetic studies of the buccal mucoadhesive film showed that the drug was released locally at the target site of action, and a very small amount might have absorbed systemically.     

Development of a buccal bioadhesive nicotine tablet formulation for smoking cessation

Bioadhesive buccal tablet formulations for delivery of nicotine into the oral cavity were developed. Carbomer (Carbopol)974P NF) (CP) and alginic acid sodium salt (NaAlg) were used as bioadhesive polymers in combination with hydroxypropyl methylcellulose (HPMC) at different ratios. Magnesium carbonate was incorporated into the formulations as a pH increasing agent. In vitro release and bioadhesion studies were performed on the developed tablets. In the formulations containing CP:HPMC, the NHT released increased with the increasing HPMC concentration whereas a decrease was observed with increasing HPMC concentration in formulations containing NaAlg:HPMC. The bioadhesive properties of the tablets containing NaAlg:HPMC was not affected by the concentration of the NaAlg (P>0.05) but increased significantly with the increasing CP concentration (P>0.05). A decrease in pH of the dissolution medium to acidic values was avoided by incorporation of magnesium hydroxide into the formulations. The developed formulations released NHT for 8h period, and remained intact except for the formulation containing CP:HPMC at 20:80 ratio.     

Effect of formulation variables on drug and polymer release from HPMC-based matrix tablets

The objective of this work was to assess the effect of two formulation variables, hydroxypropylmethylcellulose (HPMC)/lactose ratio and HPMC viscosity grade, on the release of a model drug and HPMC, as well as the mechanism of drug release from HPMC-based matrix tablets. A water-soluble compound, adinazolam mesylate, was used as the model drug. Both drug and HPMC release were found to be a function of the formulation variables, with higher drug and HPMC release rates for formulations with lower HPMC/lactose ratios and lower HPMC viscosity grades. However, the K15M and K100M formulations had identical drug release profiles. All the drug release data fit well to the Higuchi expression. By comparing the drug and HPMC release data, it was concluded that diffusion of drug through the hydrated gel layer was the predominant drug release mechanism for most of the formulations studied.     

Formulation and ex vivo evaluation of rofecoxib gel for topical application

The potential gastrointestinal disorders associated with oral administration of rofecoxib can be avoided by delivering the drug to the inflammation site at a sustained, concentrated level over an extended period of time. Hydroxypropylmethylcellulose (HPMC), sodium alginate and Carbopol 940 were used in an attempt to develop topical gel formulations of rofecoxib. The effects of polymer composition on the rate of drug release from the gel formulations were examined through cellulose membrane mounting on a Keshary-Chien diffusion cell. The effects of initial drug concentration and viscosity on the permeation rate of rofecoxib from the gel formulations were evaluated using rat epidermis at 37 +/- 0.5 degrees C. The anti-inflammatory activity of the rofecoxib gel formulation was evaluated using the rat hind paw edema model. The gel formulation consisting of 4% w/w sodium alginate-Carbopol 940 at 3:1 ratio was found to be suitable for topical application based on in vitro evaluation and ex vivo permeation studies. The drug permeation rate increased with an increase of the initial drug concentration in gels up to 25% w/w. An inverse relationship was observed between the in vitro drug release rate/ex vivo permeation rate and viscosity of the gel formulations. The anti-inflammatory activity of 4% w/w sodium alginate-Carbopol 940 gel containing 25% w/w rofecoxib in the rat hind paw edema model reveals that the drug was delivered to the inflammation site at a controlled level over a period of 6 h. These results suggest the feasibility of the topical gel formulation of rofecoxib.     

Transbuccal permeation, anti-inflammatory activity and clinical efficacy of piroxicam formulated in different gels

In attempts to avoid the systemic side effects of piroxicam (PC) (e.g. gastrotoxicity), several buccal gel formulations containing PC were prepared and their effects on the characteristics of the drug permeation through rabbit buccal mucosa in-vitro were evaluated using a Franz-type diffusion cell. The general rank order of the total flux of 0.5% PC from gels was found to be: hydroxypropylmethylcellulose (HPMC, 2.5%) > hydroxypropylcellulose (HPC, 2.5%) >or= sodium alginate (Na alg., 7%) > methylcellulose (MC, 3%) > hydroxyethylcellulose (HEC, 1.5%) > carbopol 934 (Carb. 934, 1%) >or= sodium carboxymethylcellulose (NaCMC, 2%) > pluronic F-127 (PF-127, 20%) > polyvinyl alcohol (PVA, 10%). The effect of various penetration enhancers 1% sodium lauryl sulphate (NaLS), 3% sodium deoxycholate (NaDC), 3% sodium tauroglycocholate (NaTGC) on the rate of permeation across the excised buccal mucosa (of 0.5% PC in gels prepared using 3% MC, 2.5% HPMC or 7% Na alg. base) and histology of the buccal epithelium was also investigated. Pharmacodynamic evaluation of the anti-inflammatory activity of PC in these gel formulations (containing 3% NaDC as an enhancer) was carried out using the kaolin-induced rat paw oedema method. The results obtained indicated that PC administered in 7% Na alg. or 2.5% HPMC gel bases was significantly more effective than the 3% MC gel and oral drug solution in suppressing oedema formation in rats. Comparative clinical studies were conducted in patients with post-operative dental pain and oedema following maxillofacial operations. The results revealed that 7% Na alg. and 2.5% HPMC gel formulations applied to the buccal mucosa were slightly better than or equally effective to the orally administered commercial product (Feldene Flash) tablet) in reducing pain level, swelling and tenderness within a period of 4 days. These findings suggest that PC (0.5%) administered in the buccal gel may present a potential therapeutical use as a strong anti-inflammatory and analgesic agent.     

Preparation and evaluation of procaine gels for the enhanced local anesthetic action

To develop the new procaine gel formulations with a suitable bioadhesive property, the gel was formulated using hydroxypropyl methylcellulose (HPMC) and poloxamer containing an enhancer and the local anesthetic action were evaluated. As the drug concentration in the gels and the temperature of surrounding solutions increased, the drug release increased. The activation energy of drug permeation was 4.35 kcal/mol for procaine. The effects of permeation enhancers on the permeation rate of drug through skin were studied using various enhancers, such as the glycols, the non-ionic surfactants, and the bile salts. Among the enhancers used, polyoxyethylene 2-oleyl ether showed the most enhancing effects on drug permeation through skin. The analgesic activity was examined using a tail-flick analgesimeter. From the area under the efficacy curve of the rat-tail flick tests, procaine gel containing polyoxyethylene 2-oleyl ether showed about 1.77-fold increase in analgesic activity compared with the control. These results support that the enhanced local anesthetic gels containing an enhancer could be developed using the bioadhesive polymer gels based on HPMC and poloxamer.     

Design,Preparation and Evaluation of HPMC-Based PAA or SA Freeze-Dried Scaffolds for Vaginal Delivery of Fluconazole

Purpose

Aim of this work was preparation of bioadhesive gel formulations based on Hydroxypropyl methylcellulose (HPMC), Poly(acrylic acid) (PAA) or Sodium alginate (SA) loaded with anise/fluconazole β-cyclodextrin inclusion complexes in 1:2 and 1:3 ratios intended for vaginal applications.

Methods

Freeze-drying method was effectively utilized and superporous morphology was obtained. The superporous morphology of the lyophilized gels, dynamic water vapor sorption measurements, drug release kinetics studies and their antimicrobial activities are presented.

Results

HPMC content influences especially the sorption/desorption behaviour of HPMC-based PAA gels and the morphology of the gel formulations with fluconazole/β-cyclodextrin inclusion complexes, due to the interactions among the gel networks absorbing water molecules. It was found that fluconazole release kinetics correspond to quasi-Fickian, Fickian diffusion and non-Fickian mechanisms for the studied hydrogels. The tested vaginal formulations with β-cyclodextrin inclusion complexes exhibited selectivity toward S. aureus ATCC 25923 and all tested Candida strains in comparison with the gel formulation without β-cyclodextrin.

Conclusions

The fluconazole/β cyclodextrin inclusion complexes ensure a controlled release of fluconazole over a few days, the highest amount of drug release (92%) being observed after 43 h. These bioadhesive gel formulations could be very promising topical alternative for treatment of vaginal fungal infections.

     

Properties of bioadhesive ketoprofen liquid suppositories: preparation,determination of gelation temperature,viscosity studies and evaluation of mechanical properties using texture analyzer by 4 × 4 factorial design

Abstract

Context: Development and evaluation of thermosensitive and bioadhesive liquid suppositories containing ketoprofen (KP).

Objective: This study was conducted to develope thermosensitive and bioadhesive liquid suppositories containing KP using poloxamer and different bioadhesive polymers and to investigate their gelation temperature, viscosity and mechanical properties.

Materials and methods: Bioadhesive liquid suppositories were prepared by the cold method using poloxamer 407 (P 407), Poloxamer 188 (P 188) and various amounts of different bioadhesive polymers. Their gelation temperatures, viscosity values and mechanical properties were determined using texture analyzer by 4?×?4 factorial design.

Results: It was seen that in presence of KP, gelation temperature of formulation P 407/P 188 (4/20%) significantly decreased from 64 to 37.1?°C. It is to be noted that addition of increasing concentrations of bioadhesive polymers lowered gelation temperature and its decrease was highest with addition of Carbopol 934 P (C). Results of texture profile analysis (TPA) showed that formulations containing C have significantly higher hardness and adhesiveness values than other bioadhesive formulations. According to TPA, gel structure of liquid suppository formulation F5, containing P 407/P 188/KP/C (4/20/2.5/0.8%), exhibited the greatest hardness, compressibilty, adhesiveness and besides greatest viscosity.

Discussion and conclusion: According to mechanical properties and viscosity values, it was concluded that F5 could be a promising formulation.     

Effect of chitosan on a periodontal pathogen Porphyromonas gingivalis

Local delivery systems of antimicrobial agents for treatment of the periodontal diseases received considerable attention during the past decade due to the disadvantages of the systemic administration. An ideal formulation should exhibit ease of delivery, a good retention at the application site, and a controlled release of the drug. The application of bioadhesive gels provides a long stay in the oral cavity, adequate drug penetration, high efficacy and acceptability. In dentistry and oral medicine, various applications of chitosan, which is a bioadhesive polymer have been proposed due to its favorable properties such as biocompatibility and biodegradability. The aim of this study was to determine the antimicrobial activity of chitosan formulations either in gel or film form against a periodontal pathogen, Porphyromonas gingivalis. The viscosity, bioadhesive properties and antimicrobial activity of chitosans at different molecular weight and deacetylation degree were evaluated in the absence or presence of chlorhexidine gluconate (Chx), incorporated into the formulations at 0.1 and 0.2% concentrations. The flow property of the gels were found to be suitable for topical application on the oral mucosa and to syringe into the periodontal pocket. Bioadhesion of the gels and films examined ex-vivo using fresh porcine buccal mucosa showed that both the film and gel formulations exert bioadhesive properties and was not affected by incorporation of Chx. Chitosan is shown to have an antimicrobial activity against P. gingivalis and this was higher with high molecular weight chitosan. The combination of chitosan with Chx showed a higher activity when compared to that of Chx alone, which would provide Chx application at lower concentrations thus avoiding its unwanted side effects. Chitosan films and gels seem to be promising delivery systems for local therapy of periodontal diseases with its bioadhesive property and antimicrobial activity.     

Effect of HPMC and mannitol on drug release and bioadhesion behavior of buccal discs of buspirone hydrochloride: In-vitro and in-vivo pharmacokinetic studies

Delivery of orally compromised therapeutic drug molecules to the systemic circulation via buccal route has gained a significant interest in recent past. Bioadhesive polymers play a major role in designing such buccal dosage forms, as they help in adhesion of designed delivery system to mucosal membrane and also prolong release of drug from delivery system. In the present study, HPMC (release retarding polymer) and mannitol (diluent and pore former) were used to prepare bioadhesive and controlled release buccal discs of buspirone hydrochloride (BS) by direct compression method. Compatibility of BS with various excipients used during the study was assessed using DSC and FTIR techniques. Effect of mannitol and HPMC on drug release and bioadhesive strength was studied using a 3² factorial design. The drug release rate from delivery system decreased with increasing levels of HPMC in formulations. However, bioadhesive strength of formulations increased with increasing proportion of HPMC in buccal discs. Increased levels of mannitol resulted in faster rate of drug release and rapid in vitro uptake of water due to the formation of channels in the matrix. Pharmacokinetic studies of designed bioadhesive buccal discs in rabbits demonstrated a 10-fold increase in bioavailability in comparison with oral bioavailability of buspirone reported.     

In vivo studies on nasal preparations of ciprofloxacin hydrochloride

Gel formulations of ciprofloxacin hydrochloride (CPH) were prepared with bioadhesive polymers such as hydroxypropyl methylcellulose (HPMC), hydroxyethyl cellulose (HEC) and methylcellulose (MC). They were administered into the nasal cavity of rabbits. A nasal aqueous suspension of CPH with glycerol was also applied. In addition, the effect of Tween 80 as penetration enhancer was examined. The agar plate diffusion technique was applied for the assay of CPH. The results were compared with oral and intravenous administrations. The bioavailability of the CPH gel formulation prepared with HPMC was almost identical to that of the oral route. Other nasal formulations with HEC and MC had bioavailabilities lower than oral preparations. The relative bioavailabilities for the formulation containing HEC and MC were 48.7 and 45.54%, respectively. To increase the bioavailabilities, 1% (w/w) of Tween 80 was added. The bioavailability of these gel formulations increased to 63.54 and 55.72%, respectively. Experiments carried out on rabbits showed that the nasal administration of CPH bioadhesive gel formulation containing HPMC may be an alternative to the oral route.     

Statistical optimization of insulin-loaded Pluronic F-127 gels for buccal delivery of basal insulin

The principle of statistical optimization was employed to fabricate insulin-loaded Pluronic F-127 (PF-127) gel formulations having the potential for buccal delivery of basal insulin. A two-level resolution III fractional factorial design was applied to simultaneously evaluate five independent formulation variables: PF-127 concentration, insulin concentration, sodium sulfate concentration, hydroxypropylmethyl cellulose (HPMC) concentration, and presence of sodium glycocholate. The amount of insulin released and permeated from gels as well as gelation time and mucoadhesion force of gels were measured and used as dependent response variables for formulation optimization. Optimization of a gel formulation was achieved by applying constrained optimization via regression analysis. In vitro permeation flux of insulin from the optimized formulation through procine buccal mucosa was 93.17 (±0.058, n?=?3) μg/cm(2). Plasma insulin levels following buccal administration of the optimized formulation at 10, 25 and 50 IU/kg to healthy rats were found to be dose dependent and basal insulin levels were maintained at least for 8 h. Furthermore, continuous hypoglycemia for at least 8 h was observed with 89%, 51% and 25% of blood glucose reduction, respectively, for these three doses. The results of this investigation conclude the feasibility of development of optimized buccal insulin-loaded Pluronic F-127 gels for basal insulin delivery.     

喷昔洛韦眼用温度敏感原位凝胶的制备及评价（英文）

目的研制以普朗尼克F127为主要基质的喷昔洛韦制剂,以提高其眼部生物利用度。方法通过将HPMC K4M或卡波姆934P与普朗尼克F127复合使用,制备了喷昔洛韦的温度敏感原位凝胶。以胶凝温度、流变学、药物释放特性、药代动力学及眼部刺激性等为指标进行筛选,得到最优化处方。结果使用HPMC K4M或者卡波姆934P均能降低凝胶的胶凝温度,略微增加其粘度,延缓体系中药物的释放速率;药物释放为非Fick扩散;所有处方均未表现出眼部刺激或对角膜的损伤;含卡波姆934P和普朗尼克F127的凝胶体系的眼部生物利用度最高。结论含普朗尼克F127的喷昔洛韦制剂能够以滴眼液的形式给药,而达到眼部温度时可形成凝胶;体内外评价结果表明,含有HPMC K4M或卡波姆934P以及低浓度普朗尼克F127（12%）的喷昔洛韦制剂,提高了药物在眼部的生物利用度,是一种很有前景的眼部给药系统。     

生物粘附性达那唑缓释栓剂的处方筛选与体外释放度考察

目的 :生物粘附性达那唑栓剂的处方筛选 ,并考察其体外释放规律。方法 :以羟丙甲基纤维素 (HPMC)为缓释材料 ,将等量聚乙二醇6000(PEG6000)和聚乙二醇600(PEG600)以熔融法制备含不同HPMC量的缓释栓剂 ,考察释放度与HPMC用量之间的关系。结果 :随着HPMC用量增加 ,栓剂释药减慢 ,当HPMC与PEG的比例为1∶6 5时 ,栓剂中药物在体外12h内缓慢释放 ,符合一级释放规律。结论 :生物粘附性骨架材料HPMC能延缓达那唑从栓剂中释放 ,当HPMC与PEG的比例为1∶6 5时栓剂能达到设计要求。     

Development and in vitro evaluation of buccoadhesive carvedilol tablets

Buccoadhesive tablets of carvedilol were prepared using HPMC K4M, HPMC K15M and Carbopol 934 as mucoadhesive polymers. Fifteen formulations were developed with varying concentrations of polymers. Formulations of the BC or BD series were composed of HPMC K4M or HPMC K15M in ratios of 1:1 to 1:5 whereas in the BE series Carbopol 934 was used (1:0.25 to 1:1.50). The formulations were tested for in vitro drug release, in vitro bioadhesion, moisture absorption and in vitro drug permeation through porcine buccal mucosa. Formulation BC3 showed maximum release of the drug (88.7 +/- 0.4%) with the Higuchi model release profile and permeated 21.5 +/- 2.9% of the drug (flux 8.35 +/- 0.291 microg h(-1)cm(-2)) permeation coefficient 1.34 +/- 0.05 cm h(-1)) through porcine buccal membrane. BC3 formulation showed 1.62 +/- 0.15 N of peak detachment force and 0.24 +/- 0.11 mJ of work of adhesion. FTIR results showed no evidence of interaction between the drug and polymers. XRD study revealed that the drug is in crystalline form in the polymer matrix. The results indicate that suitable bioadhesive buccal tablets with desired permeability could be prepared.     

In vitro release,rheological, and stability studies of mefenamic acid coprecipitates in topical formulations

A suitable topical formulation of mefenamic acid was developed in order to eliminate the gastrointestinal disorders associated with its oral administration. Drug coprecipitates prepared with different polymers at various drug-to-polymer ratios improved drug solubility and dissolution compared to pure drug and physical mixtures. PVP polymers (ratio 1:4) produced the best results. Aqueous ionic cream, ointments of absorption and water soluble bases and gels of methylcellulose, carboxymethylcellulose sodium, HPMC, Carbopol^® 934 and 940, and Pluronic^® F127 bases containing 1–10% drug as coprecipitates of PVP polymers (1:4) were prepared. The highest drug release was achieved at 1% drug concentration from water soluble base and methylcellulose among cream/ointment and gel bases, respectively. Gels, in general yielded better release than creams/ointments. All tested medicated creams/ointments exhibited plastic flow while all gels conformed to pseudoplasticity. Most of them showed thixotropy, a desired property of topical preparations. Stability studies revealed that HPMC and methylcellulose had the smallest changes in drug content, viscosity, and pH among the formulations. Considering drug release, rheological properties, and stability, methylcellulose gel containing 1% drug as coprecipitates of PVP K90 was the best among the studied formulations, was promising for improving bioavailability of mefenamic acid and can be used in future studies.