A systematic approach towards the objective evaluation of low-contrast performance in MDCT: Combination of a full-reference image fidelity metric and a software phantom

Objectives

To assess the feasibility of an objective approach for the evaluation of low-contrast detectability in multidetector computed-tomography (MDCT) by combining a virtual phantom containing simulated lesions with an image quality metric.

Materials and methods

A low-contrast phantom containing hypodense spheric lesions (−20 HU) was scanned on a 64-slice MDCT scanner at 4 different dose levels (25, 50, 100, 200 mAs). In addition, virtual round hypodense low-contrast lesions (20 HU object contrast) based on real CT data were inserted into the lesion-free section of the datasets. The sliding-thin-slab algorithm was applied to the image data with an increasing slice-thickness from 1 to 15 slices. For each dataset containing simulated lesions a lesion-free counterpart was reconstructed and post-processed in the same manner. The low-contrast performance of all datasets containing virtual lesions was determined using a full-reference image quality metric (modified multiscale structural similarity index, MS-SSIM*). The results were validated against a reader-study of the real lesions.

Results

For all dose levels and lesion sizes there was no statistically significant difference between the low-contrast performance as determined by the image quality metric when compared to the reader study (p < 0.05). The intraclass correlation coefficient was 0.72, 0.82, 0.90 and 0.84 for lesion diameters of 4 mm, 5 mm, 8 mm and 10 mm, respectively. The use of the sliding-thin-slab algorithm improves lesion detectability by a factor ranging from 1.15 to 2.69 when compared with the original axial slice (0.625 mm).

Conclusion

The combination of a virtual phantom and a full-reference image quality metric enables a systematic, automated and objective evaluation of low-contrast detectability in MDCT datasets and correlates well with the judgment of human readers.     

Concordance of coronary artery calcium estimates between MDCT and electron beam tomography

OBJECTIVE: The objective of our study was to compare MDCT with electron beam tomography (EBT) for the quantification of coronary artery calcification (CAC). MATERIALS AND METHODS: Sixty-eight patients underwent both MDCT and EBT within 2 months for the quantification of CAC. The images were scored in a blinded fashion and independently by two observers with a minimum of 7 days between the interpretations of images obtained from one scanner type to the other. RESULTS: Presence versus absence of CAC was discordant by EBT versus MDCT in 6% (n = 4) of the cases by observer 1, with one of these cases also discordant by observer 2. All cases except one (aortic calcium misidentified as CAC) were among those with a mean Agatston score of less than 5 present on EBT but absent on MDCT. EBT and MDCT scores correlated well (r = 0.98-0.99). The relative median variability between EBT and MDCT for the Agatston score was 24% for observer 1 and 27% for observer 2 and was 18% and 14%, respectively, for volume score (average for both observers: 27% for Agatston score and 16% for volume score). Scores were higher for EBT than MDCT in approximately half of the cases, with little systematic difference between the two (median EBT-MDCT difference: Agatston score, -0.55; volume score, 3.4 mm3). The absolute median difference averaged for the two observers was 28.75 for the Agatston score and 15.4 mm3 for the volume score. CONCLUSION: Differences in CAC measurements using EBT and MDCT are similar to interscan differences in CAC measurements previously reported for EBT or for other MDCT scanners individually.     

The accuracy of 1- and 3-mm slices in coronary calcium scoring using multi-slice CT in vitro and in vivo

The accuracy of coronary calcium scoring using 16-row MSCT comparing 1- and 3-mm slices was assessed. A thorax phantom with calcium cylinder inserts was scanned applying a non-enhanced retrospectively ECG-gated examination protocol: collimation 12×0.75 mm; 120 kV; 133 mAs_eff. Thirty-eight patients were examined using the same scan protocol. Image reconstruction was performed with an effective slice thickness of 3 and 1 mm. The volume score, calcium mass and Agatston score were determined. Image noise was measured in both studies. The volume score and calcium mass varied less than the Agatston score. The overall measured calcium mass compared to the actual calcium mass revealed a relative difference of +2.0% for 1-mm slices and −1.2% for 3-mm slices. Due to increased image noise in thinner slices in the patient study (26.1 HU), overall calcium scoring with a scoring threshold of 130 HU was not feasible. Interlesion comparison showed significantly higher scoring results for thinner slices (all P<0.001). A similar accuracy comparing calcium scoring results of 1- and 3-mm slices was shown in the phantom study; therefore, the potentially necessary increase of the patient's dose in order to achieve assessable 1-mm slices with an acceptable image-to-noise-ratio appears not to be justified. The study was supported by a “START” grant from the University Hospital of Aachen, Germany.     

Overlapping cross-sections significantly improve the reproducibility of coronary calcium measurements by electron beam tomography: a phantom study

PURPOSE: We conducted phantom studies to investigate whether overlapping cross-sections and volumetric scoring would significantly improve interscan reproducibility of electron beam tomography (EBT) for coronary artery calcium quantification. METHOD: Fifteen phantoms simulating various amounts of coronary calcification were scanned in five different positions with a slice thickness of 3.0 mm and a table feed of 3.0, 2.5, and 2.0 mm. For the conventional "Agatston score" and a "volume score" (total volume of calcified lesions), interscan variabilities were compared between the three image acquisition protocols. RESULTS: Agatston score variability was significantly lower for the 2.0 mm table feed than for the 3.0 or 2.5 mm table feed (3.0 mm: 22.9 +/- 10.3%; 2.5 mm: 13.6 +/- 8.2%; 2.0 mm: 8.9 +/- 5.5%). Volume score variability was significantly lower for 2.5 and 2.0 mm table feed than for 3.0 mm table feed (3.0 mm: 21.7 +/- 11.0%; 2.5 mm: 10.9 +/- 5.9%; 2.0 mm: 9.8 +/- 5.9%). CONCLUSION: Overlapping cross-sections, especially in combination with volumetric scoring, significantly improved interscan reproducibility of EBT calcium quantification in a phantom study.     

Relationships of clinical protocols and reconstruction kernels with image quality and radiation dose in a 128-slice CT scanner: study with an anthropomorphic and water phantom

Purpose

The aim of this study was to explore the relationship of scanning parameters (clinical protocols), reconstruction kernels and slice thickness with image quality and radiation dose in a DSCT.

Materials and methods

The chest of an anthropomorphic phantom was scanned on a DSCT scanner (Siemens Somatom Definition flash) using different clinical protocols, including single- and dual-energy modes. Four scan protocols were investigated: 1) single-source 120 kV, 110 mA s, 2) single-source 100 kV, 180 mA s, 3) high-pitch 120 kV, 130 mA s and 4) dual-energy with 100/Sn140 kV, eff.mA s 89, 76. The automatic exposure control was switched off for all the scans and the CTDIvol selected was in between 7.12 and 7.37 mGy. The raw data were reconstructed using the reconstruction kernels B31f, B80f and B70f, and slice thicknesses were 1.0 mm and 5.0 mm. Finally, the same parameters and procedures were used for the scanning of water phantom. Friedman test and Wilcoxon-Matched-Pair test were used for statistical analysis.

Results

The DLP based on the given CTDIvol values showed significantly lower exposure for protocol 4, when compared to protocol 1 (percent difference 5.18%), protocol 2 (percent diff. 4.51%), and protocol 3 (percent diff. 8.81%). The highest change in Hounsfield Units was observed with dual-energy Sn140-kV (Hounsfield unit 15.18) compared to protocol 2 (24.35 HU). The differences in noise between the different clinical protocol data sets were statistically significant [protocol 3 vs. dual-energy 100-kV (p < 0.01) and protocol 3 vs. dual-energy Sn140-kV (p < 0.01)]. The dual-energy Sn140-kV protocol shows the highest image noise (14.5 HU for 5.0 mm slice (B31f) and 162 HU for 1.0 mm slice (B70f) thickness). The difference between reconstruction kernel B31f and B80f images made using 5.0 mm reconstruction thickness was statistically significant (p < 0.0312) and 1.0 mm slice thickness shows the significance of p < 0.0312 between B31f and B70f reconstructions. In both cases, the lowest image noise was obtained from B31f reconstructed images. Again the slice thickness significantly affects image noise (p < 0.03) and the noise was higher at 1.0 mm compared to that at 5.0 mm slice thickness.

Conclusion

The clinical protocol, reconstruction kernel, slice thickness and phantom diameter or the density of material it contains directly affects the image quality. Dual energy protocol shows the lowest dose-length-product compared to all other protocols examined, the fused image shows excellent image quality and the noise is same as that of single or high-pitch mode protocol images. Advanced CT technology improves image quality and considerably reduces radiation dose.     

Effect of varying slice thickness on coronary calcium scoring with multislice computed tomography in vitro and in vivo

OBJECTIVES: To compare coronary calcium scoring results (calcium volume, calcium mass, Agatston score, and number of lesions) of different slice thicknesses using a 16-slice CT (MSCT) scanner. MATERIALS AND METHODS: A nonmoving anthropomorphic thorax phantom with calcium cylinders of different sizes and densities was scanned 30 times with repositioning applying a standardized retrospectively ECG-gated MSCT (SOMATOM Sensation 16; Siemens, Forchheim, Germany) scan protocol: collimation 12 x 0.75 mm, tube voltage 120 kV, effective tube current time-product 133 mAs(eff). Fifty patients (29 male; age 57.2 +/- 8.4 years) underwent a nonenhanced scan applying the same scan protocol. Two image sets (effective slice thicknesses 3 mm and 1 mm) were reconstructed at 60% of the RR interval. Image noise was measured in both studies. Calcium volume, calcium mass and Agatston score were calculated using a commercially available software tool. RESULTS: Due to increased image noise in thinner slices, calcium scoring in all scans was performed applying a scoring threshold of 350 HU. In the phantom study, 1-mm slices showed significantly higher scoring results in respect to calcium volume (+8.2%), calcium mass (+12.5%), and Agatston score (+5.3%) (all P < 0.0001). In the patient study, 27 patients had coronary calcifications in 3-mm slices, and 31 patients had coronary calcifications in 1-mm slices. Thinner slices showed significantly higher scoring results in respect to volume (+47.1%), mass (+47.2%), and Agatston score (+29.7%) (all P < 0.0001). CONCLUSIONS: When comparing 3-mm and 1-mm slices in coronary calcium scoring in MSCT, thinner slices lead to significantly increased scoring results.     

Influence of radiation dose and iterative reconstruction algorithms for measurement accuracy and reproducibility of pulmonary nodule volumetry: A phantom study

Purpose

To evaluate the influence of radiation dose settings and reconstruction algorithms on the measurement accuracy and reproducibility of semi-automated pulmonary nodule volumetry.

Materials and methods

CT scans were performed on a chest phantom containing various nodules (10 and 12 mm; +100, −630 and −800 HU) at 120 kVp with tube current–time settings of 10, 20, 50, and 100 mAs. Each CT was reconstructed using filtered back projection (FBP), iDose⁴ and iterative model reconstruction (IMR). Semi-automated volumetry was performed by two radiologists using commercial volumetry software for nodules at each CT dataset. Noise, contrast-to-noise ratio and signal-to-noise ratio of CT images were also obtained. The absolute percentage measurement errors and differences were then calculated for volume and mass. The influence of radiation dose and reconstruction algorithm on measurement accuracy, reproducibility and objective image quality metrics was analyzed using generalized estimating equations.

Results

Measurement accuracy and reproducibility of nodule volume and mass were not significantly associated with CT radiation dose settings or reconstruction algorithms (p > 0.05). Objective image quality metrics of CT images were superior in IMR than in FBP or iDose⁴ at all radiation dose settings (p < 0.05).

Conclusion

Semi-automated nodule volumetry can be applied to low- or ultralow-dose chest CT with usage of a novel iterative reconstruction algorithm without losing measurement accuracy and reproducibility.     

A comparative study of cone-beam CT and multidetector CT in the preoperative assessment of odontogenic cysts and tumors

Aim of the work

To compare the accuracy of cone beam CT (CBCT) and multidetector CT (MDCT) in the preoperative radiological assessment of odontogenic cysts and tumors.

Material and methods

This prospective study included 24 patients (13 males and 11 females) with primary untreated pathologically proven odontogenic cysts and tumors. Their ages ranged from 5–45 years. They underwent (CBCT) and (MDCT). All CBCT and MDCT images were reviewed for morphologic characteristics of the lesions, internal appearance, extension as well as effect on surrounding structures. All patients were scheduled for surgical treatment within one week after clinical and radiological evaluation. Using intra-operative findings as the gold standard, the accuracy of (CBCT) and (MDCT) for radiological assessment of odontogenic cyst and tumors was compared.

Results

Histopathologic examination established that of the 24 tumors; 10 were radicular cyst, five dentigerous cyst, three amelobalstoma, three odontogenic keratocyst, one buccal bifurcation cyst, one nasopalatine cyst, and one lateral periodontal cyst. Both CBCT and MDCT were identical in detecting location, borders and internal structure of examined lesions. Concerning linear measurements of the lesions, MDCT underestimated mean depth by 1.7 mm and CBCT underestimated it by 0.9 mm. MDCT underestimated the mean width by 0.9 mm, and CBCT underestimated it by 0.7 mm. MDCT overestimated the mean height by 1.7 mm and CBCT overestimated it by 1 mm. CBCT was superior than MDCT in detecting thinning and perforation of buccal cortical plate and displacement of teeth.

Conclusion

In the overall assessment of odontogenic cysts and tumors, CBCT was comparable with MDCT with no significant statistical difference (P < 0.05). However, CBCT was more accurate in linear measurements and identification of tooth displacement and buccal bone defect. It is an optimal radiological modality for preoperative radiological assessment of odontogenic tumors.     

Feasibility of slice width reduction for spiral cranial computed tomography using iterative image reconstruction

Purpose

To prospectively compare image quality of cranial computed tomography (CCT) examinations with varying slice widths using traditional filtered back projection (FBP) versus sinogram-affirmed iterative image reconstruction (SAFIRE).

Materials and methods

29 consecutive patients (14 men, mean age: 72 ± 17 years) referred for a total of 40 CCT studies were prospectively included. Each CCT raw data set was reconstructed with FBP and SAFIRE at 5 slice widths (1–5 mm; 1 mm increments). Objective image quality was assessed in three predefined regions of the brain (white matter, thalamus, cerebellum) using identical regions of interest (ROIs). Subjective image quality was assessed by 2 experienced radiologists. Objective and subjective image quality parameters were statistically compared between FBP and SAFIRE reconstructions.

Results

SAFIRE reconstructions resulted in mean noise reductions of 43.8% in the white matter, 45.6% in the thalamus and 42.0% in the cerebellum (p < 0.01) compared to FBP on non contrast-enhanced 1 mm slice width images. Corresponding mean noise reductions on 1 mm contrast-enhanced studies were 45.7%, 47.3%, and 45.0% in the white matter, thalamus, and cerebellum, respectively (p < 0.01). There was no significant difference in mean attenuation of any region or slice width between the two reconstruction methods (all p > 0.05). Subjective image quality of IR images was mostly rated higher than that of the FBP images.

Conclusion

Compared to FBP, SAFIRE provides significant reductions in image noise while increasing subjective image in CCT, particularly when thinner slices are used. Therefore, SAFIRE may allow utilization of thinner slices in CCT, potentially reducing partial volume effects and improving diagnostic accuracy.     

Calcium scoring with prospectively ECG-triggered CT: Using overlapping datasets generated with MPR decreases inter-scan variability

Objective

To examine the feasibility of reducing the inter-scan variability of prospectively ECG-triggered calcium-scoring scans by using overlapping 3-mm datasets generated from multiplanar reformation (MPR) instead of non-overlapping 3-mm or 1.5-mm datasets.

Patients and methods

Seventy-five women (59–79 years old) underwent two sequential prospectively ECG-triggered calcium-scoring scans with 16 mm × 1.5 mm collimation in one session. Between the two scans patients got off and on the table. We performed calcium scoring (Agatston and mass scores) on the following datasets: contiguous 3-mm sections reconstructed from the raw data (A), contiguous 3-mm sections from MPR (B), overlapping 3-mm sections from MPR (C) and contiguous 1.5-mm sections from the raw data (D). To determine the feasibility of the MPR approach, we compared MPR (B) with direct raw data reconstruction (A). Inter-scan variability was calculated for each type of dataset (A–D).

Results

Calcium scores ranged from 0 to 1455 (Agatston) and 0 to 279 mg (mass) for overlapping 3-mm sections (C). Calcium scores (both Agatston and mass) were nearly identical for MPR (B) and raw data approaches (A), with inter-quartile ranges of 0–1% for inter-scan variability. Median inter-scan variability with contiguous 3-mm sections (B) was 13% (Agatston) and 11% (mass). Median variability was reduced to 10% (Agatston and mass) with contiguous 1.5-mm sections (D) and to 8% (Agatston) and 7% (mass) with overlapping 3-mm MPR (A).

Conclusion

Calcium scoring on MPR yields nearly identical results to calcium scoring on images directly reconstructed from raw data. Overlapping MPR from prospectively ECG-triggered scans improve inter-scan variability of calcium scoring without increasing patient radiation dose.     

How accurate is unenhanced multidetector-row CT (MDCT) for localization of renal calculi?

Purpose

To investigate the correlation between unenhanced MDCT and intraoperative findings with regard to the exact anatomical location of renal calculi.

Design, setting, and participants

Fifty-nine patients who underwent unenhanced MDCT for suspected urinary stone disease, and who underwent subsequent flexible ureterorenoscopy (URS) as treatment of nephrolithiasis were included in this retrospective study. All MDCT data sets were independently reviewed by three observers with different degrees of experience in reading CT. Each observer was asked to indicate presence and exact anatomical location of any calcification within pyelocaliceal system, renal papilla or renal cortex. Results were compared to intraoperative findings which have been defined as standard of reference. Calculi not described at surgery, but present on MDCT data were counted as renal cortex calcifications.

Results

Overall 166 calculi in 59 kidneys have been detected on MDCT, 100 (60.2%) were located in the pyelocaliceal system and 66 (39.8%) in the renal parenchyma. Of the 100 pyelocaliceal calculi, 84 (84%) were correctly located on CT data sets by observer 1, 62 (62%) by observer 2, and 71 (71%) by observer 3. Sensitivity/specificity was 90–94% and 50–100% if only pyelocaliceal calculi measuring >4 mm in size were considered. For pyelocaliceal calculi ≤4 mm in size diagnostic performance of MDCT was inferior.

Conclusion

Compared to flexible URS, unenhanced MDCT is accurate for distinction between pyelocaliceal calculi and renal parenchyma calcifications if renal calculi are >4 mm in size. For smaller renal calculi, unenhanced MDCT is less accurate and distinction between a pyelocaliceal calculus and renal parenchyma calcification is difficult.     

Characterization of a computed tomography iterative reconstruction algorithm by image quality evaluations with an anthropomorphic phantom

Objective

This study aims to investigate the consequences on dose and image quality of the choices of different combinations of NI and adaptive statistical iterative reconstruction (ASIR) percentage, the image quality parameters of GE CT equipment.

Methods

An anthropomorphic phantom was used to simulate the chest and upper abdomen of a standard weight patient. Images were acquired with tube current modulation and different values of noise index, in the range 10–22 for a slice thickness of 5 mm and a tube voltage of 120 kV. For each selected noise index, several image series were reconstructed using different percentages of ASIR (0, 40, 50, 60, 70, 100). Quantitative noise was assessed at different phantom locations. Computed tomography dose index (CTDI) and dose length products (DLP) were recorded. Three radiologists reviewed the images in a blinded and randomized manner and assessed the subjective image quality by comparing the image series with the one acquired with the reference protocol (noise index 14, ASIR 40%). The perceived noise, contrast, edge sharpness and overall quality were graded on a scale from −2 (much worse) to +2 (much better).

Results

A repeatable trend of noise reduction versus the percentage of ASIR was observed for different noise levels and phantom locations. The different combinations of noise index and percentage of ASIR to obtain a desired dose reduction were assessed. The subjective image quality evaluation evidenced a possible dose reduction between 24 and 40% as a consequence of an increment of ASIR percentage to 50 or 70%, respectively.

Conclusion

These results highlighted that the same patient dose reduction can be obtained with several combinations of noise index and percentages of ASIR, providing a model with which to choose these acquisition parameters in future optimization studies, with the aim of reducing patient dose by maintaining image quality in diagnostic levels.     

Continuously moving table MRI with sliding multislice for rectal cancer staging: Image quality and lesion detection

Purpose

To determine image quality and lesion detection of sliding multislice (SMS), a recently developed moving table MRI technique, in patients with rectal cancer.

Materials and methods

Twenty-seven paired SMS (Avanto, Siemens Medical Solutions) and MDCT (Sensation 64, Siemens Medical Solutions) examinations of abdomen and pelvis were performed in patients with rectal cancer and compared for detection of liver, lymph node and bone metastases by two independent observers. A contrast-enhanced, fat saturated 2D gradient echo sequence (TE, 2.0 ms; TR, 102 ms; slice, 5 mm) was acquired with SMS and a standard contrast-enhanced protocol (100 ml @ 2.5 ml/s; slice, 5 mm) was used for abdominal MDCT. Standard of reference consisted of a consensus evaluation of SMS, MDCT, and all available follow-up examinations after a period of 6 months.Artifact burden and image quality of SMS was assessed in comparison to stationary gradient echo sequences obtained in an age-matched group of 27 patients.

Results

Whereas SMS achieved a mean quality score of 3.65 (scale, 0-4) for the liver, representing very good diagnostic properties, strong breathing artifacts in the intestinal region were observed in 19 cases by both observers. The retroperitoneum still achieved a mean quality score of 3.52, although breathing artifacts were noted in 12 and 15 cases (observers 1 and 2, respectively). The sensitivities of SMS to detect hepatic metastases were 91.2% and 94.1% for both observers, respectively, compared to 98.5%/98.5% for MDCT. The sensitivities for lymph node metastases were 87.5%/81.3% for SMS compared to 78.1%/81.3% for MDCT. The sensitivities for bone metastases were 91.7%/100% for SMS compared to 8.3%/16.7% for MDCT.

Conclusion

With slightly reduced image quality in the intestinal region, SMS exhibits equal detection of lymph node and liver metastases compared to MDCT. SMS MRI proved to be superior to MDCT in detection of bone metastases.     

Assessment of calcium scoring performance in cardiac computed tomography

Electron beam tomography (EBT) has been used for cardiac diagnosis and the quantitative assessment of coronary calcium since the late 1980s. The introduction of mechanical multi-slice spiral CT (MSCT) scanners with shorter rotation times opened new possibilities of cardiac imaging with conventional CT scanners. The purpose of this work was to qualitatively and quantitatively evaluate the performance for EBT and MSCT for the task of coronary artery calcium imaging as a function of acquisition protocol, heart rate, spiral reconstruction algorithm (where applicable) and calcium scoring method. A cardiac CT semi-anthropomorphic phantom was designed and manufactured for the investigation of all relevant image quality parameters in cardiac CT. This phantom includes various test objects, some of which can be moved within the anthropomorphic phantom in a manner that mimics realistic heart motion. These tools were used to qualitatively and quantitatively demonstrate the accuracy of coronary calcium imaging using typical protocols for an electron beam (Evolution C-150XP, Imatron, South San Francisco, Calif.) and a 0.5-s four-slice spiral CT scanner (Sensation 4, Siemens, Erlangen, Germany). A special focus was put on the method of quantifying coronary calcium, and three scoring systems were evaluated (Agatston, volume, and mass scoring). Good reproducibility in coronary calcium scoring is always the result of a combination of high temporal and spatial resolution; consequently, thin-slice protocols in combination with retrospective gating on MSCT scanners yielded the best results. The Agatston score was found to be the least reproducible scoring method. The hydroxyapatite mass, being better reproducible and comparable on different scanners and being a physical quantitative measure, appears to be the method of choice for future clinical studies. The hydroxyapatite mass is highly correlated to the Agatston score. The introduced phantoms can be used to quantitatively assess the performance characteristics of, for example, different scanners, reconstruction algorithms, and quantification methods in cardiac CT. This is especially important for quantitative tasks, such as the determination of the amount of calcium in the coronary arteries, to achieve high and constant quality in this field. Electronic Publication     

Reducing CT radiation dose with iterative reconstruction algorithms: The influence of scan and reconstruction parameters on image quality and CTDIvol

Objectives

In this phantom CT study, we investigated whether images reconstructed using filtered back projection (FBP) and iterative reconstruction (IR) with reduced tube voltage and current have equivalent quality. We evaluated the effects of different acquisition and reconstruction parameter settings on image quality and radiation doses. Additionally, patient CT studies were evaluated to confirm our phantom results.

Methods

Helical and axial 256 multi-slice computed tomography scans of the phantom (Catphan^®) were performed with varying tube voltages (80–140 kV) and currents (30–200 mAs). 198 phantom data sets were reconstructed applying FBP and IR with increasing iterations, and soft and sharp kernels. Further, 25 chest and abdomen CT scans, performed with high and low exposure per patient, were reconstructed with IR and FBP. Two independent observers evaluated image quality and radiation doses of both phantom and patient scans.

Results

In phantom scans, noise reduction was significantly improved using IR with increasing iterations, independent from tissue, scan-mode, tube-voltage, current, and kernel. IR did not affect high-contrast resolution. Low-contrast resolution was also not negatively affected, but improved in scans with doses <5 mGy, although object detectability generally decreased with the lowering of exposure. At comparable image quality levels, CTDI_vol was reduced by 26–50% using IR. In patients, applying IR vs. FBP resulted in good to excellent image quality, while tube voltage and current settings could be significantly decreased.

Conclusions

Our phantom experiments demonstrate that image quality levels of FBP reconstructions can also be achieved at lower tube voltages and tube currents when applying IR. Our findings could be confirmed in patients revealing the potential of IR to significantly reduce CT radiation doses.     

Can 18F-FDG PET improve the evaluation of suspicious breast lesions on MRI?

Objective

To evaluate the impact of adding 18F-fluorine-2-deoxy-d-glucose (FDG) positron emission tomography (PET) in the evaluation of suspicious breast lesions on magnetic resonance imaging (MRI).

Methods

Sixty patients with suspicious breast lesions on MRI were selected to perform a PET–CT in prone position, dedicated to the evaluation of the breasts. The areas with increased 18F-FDG concentration relative to normal parenchyma were considered positive on PET–CT. Fusion of PET and MRI images (PET–MRI) was performed on a dedicated workstation to better locate corresponding lesions, and its findings were compared with histological results.

Results

76 lesions were evaluated, including 64 mass lesions (84.2%) and 12 non-mass lesions (15.8%). Lesions’ mean diameter on MRI was 29.6 ± 19.2 mm (range 6–94 mm). PET–CT showed increased metabolically activity on 57 lesions (75.0%), with mean maximum SUV of 5.7 ± 5.0 (range 0.8–23.1). On histopathology, there were 17 (22.4%) benign and 59 (79.7%) malignant lesions. Considering all lesions, PET–MRI fusion provided 89.8% sensitivity, 76.5% specificity and 86.8% accuracy. Considering only mass lesions higher than 10 mm, PET–MRI fusion provided 95.8% sensitivity, 83.3% specificity and 93.3% accuracy.

Conclusion

The inclusion of 18F-FDG PET on the evaluation of suspicious breast lesions on MRI helped to differentiate benign from malignant breast lesions, especially for mass lesions with a diameter higher than 10 mm.     

Effect of radiation dose and iterative reconstruction on lung lesion conspicuity at MDCT: Does one size fit all?

Objective

To evaluate the effect of different acquisition parameters and reconstruction algorithms in lung lesions conspicuity in chest MDCT.

Methods

An anthropomorphic chest phantom containing 6 models of lung disease (ground glass opacity, bronchial polyp, solid nodule, ground glass nodule, emphysema and tree-in-bud) was scanned using 80, 100 and 120 kVp, with fixed mAs ranging from 10 to 110. The scans were reconstructed using filtered back projection (FBP) and iterative reconstruction (IR) algorithms. Three blinded thoracic radiologists reviewed the images and scored lesions conspicuity and overall image quality. Image noise and radiation dose parameters were recorded.

Results

All acquisitions with 120 kVp received a score of 3 (acceptable) or higher for overall image quality. There was no significant difference between IR and FBP within each setting for overall image quality (p > 0.05), even though image noise was significantly lower using IR (p < 0.0001). When comparing specific lower radiation acquisition parameters 100 kVp/10 mAs [Effective Dose (ED): 0.238 mSv] vs 120 kVp/10 mAs (ED: 0.406 mSv) vs 80 kVp/40 mAs (ED: 0.434 mSv), we observed significant difference in lesions conspicuity (p < 0.02), as well as significant difference in overall image quality, independent of the reconstruction algorithm (p < 0.02), with higher scores on the 120 kV/10 mAs setting. Tree-in-bud pattern, ground glass nodule and ground glass opacity required lower radiation doses to get a diagnostic score using IR when compared to FBP.

Conclusion

Designing protocols for specific lung pathologies using lower dose acquisition parameters is feasible, and by applying iterative reconstruction, radiologists may have better diagnostic confidence to evaluate some lesions in very low dose settings, preserving acceptable image quality.     

Single reading with computer-aided detection performed by selected radiologists in a breast cancer screening program

Objectives

To assess the impact of shifting from a standard double reading plus arbitration protocol to a single reading by experienced radiologists assisted by computer-aided detection (CAD) in a breast cancer screening program.

Methods

This was a prospective study approved by the ethics committee. Data from 21,321 consecutive screening mammograms in incident rounds (2010–2012) were read following a single reading plus CAD protocol and compared with data from 47,462 consecutive screening mammograms in incident rounds (2004–2010) that were interpreted following a double reading plus arbitration protocol. For the single reading, radiologists were selected on the basis of the appraisement of their previous performance.

Results

Period 2010–2012 vs. period 2004–2010: Cancer detection rate (CDR): 6.1‰ (95% confidence interval: 5.1–7.2) vs. 5.25‰; Recall rate (RR): 7.02% (95% confidence interval: 6.7–7.4) vs. 7.24% (selected readers before arbitration) and vs. 3.94 (all readers after arbitration); Predictive positive value of recall: 8.69% vs. 13.32%. Average size of invasive cancers: 14.6 ± 9.5 mm vs. 14.3 ± 9.5 mm. Stage: 0 (22.3/26.1%); I (59.2/50.8%); II (19.2/17.1%); III (3.1/3.3%); IV (0/1.9%). Specialized breast radiologists performed better than general radiologists.

Conclusions

The cancer detection rate of the screening program improved using a single reading protocol by experienced radiologists assisted by CAD, at the cost of a moderate increase of the recall rate mainly related to the lack of arbitration.     

The influence of heart rate, slice thickness, and calcification density on calcium scores using 64-slice multidetector computed tomography: a systematic phantom study

OBJECTIVE: The purpose of this study was to investigate the influence of heart rate, slice thickness, and calcification density on absolute value and variability of calcium score using 64-slice multidetector computed tomography (MDCT). METHODS AND MATERIALS: Three artificial arteries containing each 3 lesions with varying density were scanned using a moving cardiac phantom at rest and at 50 to 110 beats per minute (bpm) at 10-bpm intervals on a 64-slice MDCT. Images were reconstructed at slice thicknesses (increment) of 0.6 (0.4), 0.75 (0.5), 1.5 (1.5), and 3.0 (3.0) mm. The amount of calcium was expressed as an Agatston score, volume score, and equivalent mass. RESULTS: Absolute coronary artery calcium (CAC) scores decreased [average -37% for low density calcification (LDC)] or increased [average +32% for high density calcification (HDC)] at heart rates over 60 bpm depending on slice thickness and scoring method. Thinner slice thicknesses yielded higher CAC scores. Variability of the CAC scores increased with increasing heart rates especially for low density calcifications (8% at rest vs. 50% at 110 bpm). Variability also increased for thicker slices (average 6% for 0.6 mm vs. 18% for 3.0 mm). Variability was lower for HDC compared with LDC (approximately 5% for HDC vs. 27% for LDC at 70 bpm, averaged over all methods and slice thicknesses). CONCLUSION: CAC-scoring is strongly influenced by cardiac motion, calcification density, and slice thickness. CAC scores increase for high density calcifications and decrease for low density calcifications at increasing heart rates. Heart rate should be reduced on 64-slice MDCT to obtain a lower degree of variability of CAC-scoring, preferably below 70 bpm. A thinner slice thickness further enhances the reproducibility.     

Anemia and the risk of contrast-induced nephropathy in patients with renal insufficiency undergoing contrast-enhanced MDCT

Purpose

The purpose of this study was to assess the effect of anemia on the incidence of contrast-induced nephropathy (CIN) in patients with renal impairment undergoing MDCT.

Materials and methods

Institutional review board approval was waived for this retrospective review of 843 patients with stable renal insufficiency (eGFR between 15 and 60 mL/min) who had undergone contrast-enhanced MDCT. Baseline hematocrit and hemoglobin values were measured. Serum creatinine (SCr) was assessed at the baseline and at 48–72 h after contrast administration.

Results

The overall incidence of CIN in the patient population with renal insufficiency was 6.9%. CIN developed in 7.8% (54 of 695) of anemic patients, and in 2.8% (4 of 148) of non-anemic patients (P = .027). After adjustment for confounders, low hemoglobin and low hematocrit values remained independent predictors of CIN (odds ratio 4.6, 95% CI 1.0–20.5, P = .046).

Conclusions

Anemia is associated with a higher incidence of CIN in patients with renal insufficiency. Anemia is a potentially modifiable risk factor for CIN, and has an unfavorable impact on prognosis in patients with renal insufficiency undergoing contrast-enhanced MDCT.