Three-dimensional culture of differentiating marrow stromal osteoblasts in biomimetic poly(propylene fumarate-co-ethylene glycol)-based macroporous hydrogels

This study assesses the ability of biomimetic poly(propylene fumarate-co-ethylene glycol)-based hydrogels to sustain the differentiation of marrow stromal cells (MSCs) to the osteoblastic phenotype and to produce a mineralized matrix in vitro. Macroporous hydrogels based on poly(propylene fumarate-co-ethylene glycol) with and without covalently linked RGD cell-adhesive peptide were synthesized and seeded with rat MSCs suspended in media or in a type I collagen solution. Cells suspended in media were found to adhere to RGD-modified but not to unmodified hydrogels. Cells suspended in a collagen solution were entrapped after collagen gelation and proliferated independent of the peptide modification of the hydrogel. Hydrogel modification with RGD peptide was sufficient to allow for the adhesion and differentiation of MSCs to the osteoblastic phenotype in the presence of osteogenic culture supplements. MSCs seeded with a collagen gel onto RGD-modified macroporous hydrogels after 28 days of culture showed a significant increase in cell numbers, from 15,200 +/- 2,000 to 208,600 +/- 69,700 cells (p < 0.05). Moreover, significant calcium deposition was apparent after 28 days of culture in RGD-modified hydrogels for cells suspended in a collagen gel in comparison to cells suspended in media, 3.47 +/- 0.26 compared to 0.82 +/- 0.20 mg Ca(2+) per scaffold (p < 0.05). Confocal microscopy revealed that MSCs suspended in a collagen gel and cultured on RGD-modified hydrogels for 28 days were adhered to the surface of the hydrogel while MSCs suspended in a collagen gel and cultured on unmodified hydrogels were located within the pores of and not in direct contact with the hydrogel surface. The results demonstrate that these biomimetic hydrogels facilitate the adhesion and support the differentiation of MSCs to the osteoblastic phenotype in the presence of osteogenic culture media.     

Flow perfusion culture induces the osteoblastic differentiation of marrow stroma cell-scaffold constructs in the absence of dexamethasone

Flow perfusion culture of scaffold/cell constructs has been shown to enhance the osteoblastic differentiation of rat bone marrow stroma cells (MSCs) over static culture in the presence of osteogenic supplements including dexamethasone. Although dexamethasone is known to be a powerful induction agent of osteoblast differentiation in MSC, we hypothesied that the mechanical shear force caused by fluid flow in a flow perfusion bioreactor would be sufficient to induce osteoblast differentiation in the absence of dexamethasone. In this study, we examined the ability of MSCs seeded on titanium fiber mesh scaffolds to differentiate into osteoblasts in a flow perfusion bioreactor in both the presence and absence of dexamethasone. Scaffold/cell constructs were cultured for 8 or 16 days and osteoblastic differentiation was determined by analyzing the constructs for cellularity, alkaline phosphatase activity, and calcium content as well as media samples for osteopontin. For scaffold/cell constructs cultured under flow perfusion, there was greater scaffold cellularity, alkaline phosphatase activity, osteopontin secretion, and calcium deposition compared with static controls, even in the absence of dexamethasone. When dexamethasone was present in the cell culture medium under flow perfusion conditions, there was further enhancement of osteogenic differentiation as evidenced by lower scaffold cellularity, greater osteopontin secretion, and greater calcium deposition. These results suggest that flow perfusion culture alone induces osteogenic differentiation of rat MSCs and that there is a synergistic effect of enhanced osteogenic differentiation when both dexamethasone and flow perfusion culture are used.     

Effect of bone extracellular matrix synthesized in vitro on the osteoblastic differentiation of marrow stromal cells

Alternative materials for bone grafts are gaining greater importance in dentistry and orthopaedics, as the limitations of conventional methods become more apparent. We are investigating the generation of osteoinductive matrix in vitro by culturing cell/scaffold constructs for tissue engineering applications. The main strategy involves the use of a scaffold composed of titanium (Ti) fibers seeded with progenitor cells. In this study, we investigated the effect of extracellular matrix (ECM) laid down by osteoblastic cells on the differentiation of marrow stromal cells (MSCs) towards osteoblasts. Primary rat MSCs were harvested from bone marrow, cultured in dexamethasone containing medium and seeded directly onto the scaffolds. Constructs were grown in static culture for 12 days and then decellularized by rapid freeze-thaw cycling. Decellularized scaffolds were re-seeded with pre-cultured MSCs at a density of 2.5 x 10(5) cells/construct and osteogenicity was determined according to DNA, alkaline phosphatase, calcium and osteopontin analysis. DNA content was higher for cells grown on decellularized scaffolds with a maximum content of about 1.3 x 10(6) cells/construct. Calcium was deposited at a greater rate by cells grown on decellularized scaffolds than the constructs with only one seeding on day-16. The Ti/MSC constructs showed negligible calcium content by day-16, compared with 213.2 (+/- 13.6) microg/construct for the Ti/ECM/MSC constructs cultured without any osteogenic supplements after 16 days. These results indicate that bone-like ECM synthesized in vitro can enhance the osteoblastic differentiation of MSCs.     

Effect of hydrogel porosity on marrow stromal cell phenotypic expression

This study describes investigation of porous photocrosslinked oligo[(polyethylene glycol) fumarate] (OPF) hydrogels as potential matrix for osteoblastic differentiation of marrow stromal cells (MSCs). The porosity and interconnectivity of porous hydrogels were assessed using magnetic resonance microscopy (MRM) as a noninvasive investigative tool that could image the water construct inside the hydrogels at a high-spatial resolution. MSCs were cultured onto the porous hydrogels and cell number was assessed using PicoGreen DNA assay. Our results showed 10% of cells initially attached to the surface of scaffolds. However, cells did not show significant proliferation over a time period of 14 days. MSCs cultured on porous hydrogels had increased alkaline phosphatase activity as well as deposition of calcium, suggesting successful differentiation and maturation to the osteoblastic phenotype. Moreover, continued expression of type I collagen and osteonectin over 14 days confirmed osteoblastic differentiation of MSCs. MRM was also applied to monitor osteogenesis of MSCs on porous hydrogels. MRM images showed porous scaffolds became consolidated with osteogenic progression of cell differentiation. These findings indicate that porous OPF scaffolds enhanced MSC differentiation leading to development of bone-like mineralized tissue.     

In vitro osteogenic differentiation of marrow stromal cells encapsulated in biodegradable hydrogels

Novel hydrogel materials based on oligo(poly(ethylene glycol) fumarate) (OPF) crosslinked with a redox radical initiation system were recently developed in our laboratory as injectable cell carriers for orthopedic tissue engineering applications. The effect of OPF hydrogel material properties on in vitro osteogenic differentiation of encapsulated rat marrow stromal cells (MSCs) with and without the presence of osteogenic supplements (dexamethasone) was investigated. Two OPF formulations that resulted in hydrogels with different swelling properties were used to encapsulate rat MSCs (seeding density approximately 13 million cells/mL, samples 6 mm diameter x 0.5 mm thick before swelling) and osteogenic differentiation in these constructs over 28 days in vitro was determined via histology and biochemical assays for alkaline phosphatase, osteopontin and calcium. Evidence of MSC differentiation was apparent over the culture period for samples without dexamethasone, but there was large variability in calcium production between constructs using cells of the same source. Differentiation was also seen in samples cultured with osteogenic supplements, but calcium deposition varied depending on the source pool of MSCs. By day 28, osteopontin and calcium results suggested that, in the presence of dexamethasone, OPF hydrogels with greater swelling promoted embedded MSC differentiation over those that swelled less (43.7 +/- 16.5 microg calcium/sample and 16.4 +/- 2.8 microg calcium/sample, respectively). In histological sections, mineralized areas were apparent in all sample types many microns away from the cells. These experiments indicate that OPF hydrogels are promising materials for use as injectable MSC carriers and that hydrogel swelling properties can influence osteogenic differentiation of encapsulated progenitor cells.     

Calcium phosphate ceramics in bone tissue engineering: A review of properties and their influence on cell behavior

Calcium phosphate ceramics (CPCs) have been widely used as biomaterials for the regeneration of bone tissue because of their ability to induce osteoblastic differentiation in progenitor cells. Despite the progress made towards fabricating CPCs possessing a range of surface features and chemistries, the influence of material properties in orchestrating cellular events such as adhesion and differentiation is still poorly understood. Specifically, questions such as why certain CPCs may be more osteoinductive than others, and how material properties contribute to osteoinductivity/osteoconductivity remain unanswered. Therefore, this review article systematically discusses the effects of the physical (e.g. surface roughness) and chemical properties (e.g. solubility) of CPCs on protein adsorption, cell adhesion and osteoblastic differentiation in vitro. The review also provides a summary of possible signaling pathways involved in osteoblastic differentiation in the presence of CPCs. In summary, these insights on the contribution of material properties towards osteoinductivity and the role of signaling molecules involved in osteoblastic differentiation can potentially aid the design of CPC-based biomaterials that support bone regeneration without the need for additional biochemical supplements.     

Hydrodynamic shear stimulates osteocalcin expression but not proliferation of bone marrow stromal cells

Bone marrow stromal cells (BMSCs) are a promising component for engineered bone tissues, but in vitro formation of a bonelike tissue requires culture conditions that direct these multipotent cells toward osteoblastic maturation. Fluid flow has been postulated to stimulate bone tissue development in vivo, but the effect of shear stress on proliferation and differentiation of osteoprogenitor cell cultures in vitro has not been examined closely. In this study BMSCs were cultured on fibronectin-coated substrates and exposed intermittently (for 30 min 3, 5, 7, 9, 11, and 13 days after seeding) to a spatially dependent range of shear stresses (0.36 to 2.7 dyn/cm(2)) using a radial-flow chamber. After 7 days cell density did not vary between sheared and control cell layers. In contrast, after 21 days the accumulation of osteocalcin protein (OC) in cell layers was increased significantly relative to static controls, while the quantity of multilayer cell aggregates (i.e., bone nodules) was diminished. Neither of these effects varied systematically with shear magnitude. Finally, pretreatment of cultures with the cyclooxygenase (COX)-2-specific inhibitor NS-398 blocked prostaglandin secretion in response to shearing flow and significantly reduced OC accumulation in cell layers. These results provide evidence that flow stimulates osteoblastic maturation but not proliferation of bone marrow stromal cells and that prostaglandin signaling is involved in this effect.     

Spatial distribution of mineralized bone matrix produced by marrow mesenchymal stem cells in self-assembling peptide hydrogel scaffold

We evaluated the osteogenic differentiation of mesenchymal stem cells (MSCs) using a new class of synthetic self-assembling peptide hydrogels, RADA 16, as a scaffold for three-dimensional culture. MSCs derived from rat bone marrow were culture-expanded and seeded into the hydrogel and further cultured in osteogenic medium containing beta-glycerophosphate, ascorbic acid, and dexamethasone for 2-4 weeks. High alkaline phosphatase activity and osteocalcin (OC) contents were detected at both the protein and gene expression levels during the culture periods. Both calcium and the OC contents increased over time, indicating the growth of a mineralized extracellular matrix within the hydrogel. Moreover, the process of the growth of the mineralized matrix determined by three-dimensional microarchitecture images was obtained by confocal laser scanning microscopy. The findings show that MSCs can differentiate into mature osteoblasts to form mineralized matrices within the hydrogel scaffold. Importantly, the differentiation can occur three dimensionally within the hydrogel, indicating that RADA 16 can be considered attractive synthetic biomaterial for use in bone tissue engineering.     

Human osteoblastic cell response to a Ca- and P-enriched titanium surface obtained by anodization

The aim of the present study was to evaluate the in vitro osteogenic potential of subcultured human osteoblastic cells derived from alveolar bone on a titanium (Ti) surface produced by an anodized alkali treatment (BSP-AK). Primary osteoblastic cells were subcultured on BSP-AK and machined Ti discs (control) and grown for periods of up to 21 days under osteogenic conditions. Morphologic and biochemical methods were used to assess important parameters of in vitro bone-like tissue formation. Although no major differences were observed between the BSP-AK and the control Ti surface in terms of cell attachment and mineralized matrix formation, a significant increase in cell population, ALP activity, and collagen content was detected in cultures on BSP-AK surface. Our results demonstrate that human osteoblastic cells are sensitive to the BSP-AK-modified Ti surface during the transitional stage between the end of the proliferative phase and the onset of the differentiation/matrix maturation ones. Together with the good mechanical properties exhibited by the Ca- and P- coating, our findings suggest that BSP-AK treatment could be useful for the development of a new surface for dental and orthopedic implants.     

Modulating the rigidity and mineralization of collagen gels using poly(lactic-co-glycolic Acid) microparticles

Extensive efforts have been made to prepare osteoconductive collagen gels for the regeneration of normal bone and the pathological examination of diseased bone; however, collagen gels are often plagued by limited controllability of their rigidity and mineral deposition. This study reports a simple but efficient strategy that tunes the mechanical properties of, and apatite formation in, collagen gels by incorporating hydrolyzable poly(lactic-co-glycolic acid) (PLGA) microparticles within the gels. The PLGA microparticles are associated with the collagen fibrils and increased both the gel's elasticity and rigidity while minimally influencing its permeability. As compared with pure collagen gels, the PLGA microparticle-filled collagen gels, termed PLGA-Col hydrogels, significantly enhanced the deposition of apatite-like minerals within the gels when incubated in simulated body fluid or encapsulated with mesenchymal stem cells (MSCs) undergoing osteogenic differentiation. Finally, PLGA-Col hydrogels mineralized by differentiated MSCs led to an enhanced formation of bone-like tissues within the hydrogels. Overall, the PLGA-Col hydrogel system developed in this study will serve to improve the quality of osteoconductive matrices for both fundamental and clinical studies that are relevant to bone repair, regeneration, and pathogenesis.     

Monitoring Bone Tissue Engineered (BTE) Constructs Based on the Shifting Metabolism of Differentiating Stem Cells

Ever-increasing demand for bone grafts necessitates the realization of clinical implementation of bone tissue engineered constructs. The predominant hurdle to implementation remains to be securing FDA approval, based on the lack of viable methods for the rigorous monitoring of said constructs. The study presented herein details a method for such monitoring based on the shifting metabolism of mesenchymal stem cells (MSCs) as they differentiate into osteoblasts. To that end, rat MSCs seeded on 85% porous spunbonded poly(L-lactic acid) scaffolds were cultured in flow perfusion bioreactors with baseline or osteoinductive media, and levels of key physio-metabolic markers (oxygen, glucose, osteoprotegerin, and osteocalcin) were monitored throughout culture. Comparison of these non-destructively obtained values and current standard destructive analyses demonstrated key trends useful for the concurrent real-time monitoring of construct cellularity and maturation. Principle among these is the elucidation of the ratio of the rates of oxygen uptake to glucose consumption as a powerful quality marker. This ratio, supported on a physiological basis, has been shown herein to be reliable in the determination of both construct maturation (defined as osteoblastic differentiation and accompanying mineralization) and construct cellularity. Supplementary monitoring of OPG and OCN are shown to provide further validation of such metrics.     

In vitro osteoblastic differentiation of human bone marrow cells in the presence of metal ions.

For periods up to 21 days human bone marrow was cultured in control conditions that favor the proliferation and differentiation of osteoblastic cells. The effect of AISI 316L corrosion products and the corresponding major separate metal ions (Fe, Cr, and Ni) were studied in three different phases of the culture period in order to investigate the effects of metal ions in cell populations representative of osteoblastic cells in different stages of differentiation. Toxicity consequences of the presence of metal ions in bone marrow cultures were evaluated by biochemical parameters (enzymatic reduction of MTT, alkaline phosphatase activity, and total protein content), histochemical assays (identification of ALP-positive cells and Ca and phosphates deposits), and observation of the cultures by light and scanning electron microscopy. Culture media were analyzed for total and ionized Ca and P and also for metal ions (Fe, Cr, and Ni). The presence of AISI 316L corrosion products and Ni salt in bone marrow cultures during the first and second weeks of culture significantly disturbs the normal behavior of these cultures, interfering in the lag phase and exponential phase of cell growth and ALP expression. However, the presence of these species during the third week of culture, when expression of osteoblastic functions occurs (mineralization process), did not result in any detectable effect. Fe salt also disturbs the behavior of bone marrow cell cultures when present during the lag phase and proliferation phase, and a somewhat compromised response between the normal pattern (control cultures) and intense inhibition (AISI 316L corrosion products and Ni salt-added cultures) was observed. Fe did not affect the progression of the mineralization phase. Osteogenic cultures exposed to Cr salt (Cr3+) presented a pattern similar to the controls, indicating that this element does not interfere, in the concentration studied, in the osteoblastic differentiation of bone marrow cells. Quantification of metal ions in the culture media showed that Cr (originated from AISI 316L corrosion products but from not Cr3+ salt) and Ni (originated from AISI 316L corrosion products and Ni salt) appear to be retained by the bone marrow cultures.     

In vitro differentiation of human mesenchymal stem cells on Ti6Al4V surfaces

Long-term stability of arthroplasty prosthesis depends on the integration between the bone tissue and the implanted biomaterials, which requires the contribution of osteoblastic precursors and their continuous differentiation into the osteoblastic phenotype. Classically, these interactions are tested in vitro using mesenchymal stem cells (MSCs) isolated and ex vivo expanded from bone marrow aspirates. Human adipose tissue-derived stromal cells (AMSCs) may be a more convenient source of MSCs, according to their abundance and accessibility, but no data are available on their in vitro interactions with hard biomaterials. The aim of this work is to compare the osteogenic potential of human AMSCs and bone marrow-derived MSCs (BMMSCs) and to evaluate their response to Ti6Al4V alloy in terms of adhesion, proliferation and differentiation features, using the human osteosarcoma cell line SaOS-2 for comparison. The overall results showed that AMSCs have the same ability to produce bone matrix as BMMSCs and that Ti6Al4V surfaces exhibit an osteoinductive action on AMSCs, promoting their differentiation into functional osteoblasts and increasing bone formation. In conclusion, adipose tissue is a promising autologous source of osteoblastic cells with important clinical implications for bone tissue engineering.     

A novel nanoparticle-enhanced photoacoustic stimulus for bone tissue engineering

In this study, we introduce a novel nanoparticle-enhanced biophysical stimulus based on the photoacoustic (PA) effect. We demonstrate that the PA effect differentiates bone marrow-derived marrow stromal cells (MSCs) grown on poly(lactic-co-glycolic acid) (PLGA) polymer films toward osteoblasts. We further show that the osteodifferentiation of the MSCs due to PA stimulation is significantly enhanced by the presence of single-walled carbon nanotubes (SWCNTs) in the polymer. MSCs, without the osteogenic culture supplements (0.01?M β-glycerophosphate, 50?mg/L ascorbic acid, 10(-8) M dexamethasone), were seeded onto plain glass slides, glass slides coated with PLGA, or glass slides coated with SWCNT-PLGA films and photoacoustically stimulated by a 527?nm Nd:YLF pulse laser, with a 200?ns pulse duration, and 10?Hz pulse frequency for 10?min a day for 15 consecutive days. The study had four control groups; three baseline controls similar to the three experimental groups but without PA stimulation, and one positive control where MSCs were grown on glass slides without PA stimulation but with osteogenic culture supplements. The osteogenic differentiation of all the groups was evaluated using quantitative assays (alkaline phosphatase, calcium, osteopontin) and qualitative staining (alizarin red). After 15 days, the PA stimulated groups showed up to a 350% increase in calcium content when compared with the non-PA stimulated positive control. Further, within the PA stimulated group, the PLGA-SWCNT group had 130% higher calcium values than the PLGA film without SWCNTs. These results were further corroborated by the analysis of osteopontin secretion, alkaline phosphatase expression, and qualitative alizarin red staining of extracellular matrix calcification. The results indicate that PA stimulation holds promise for bone tissue engineering and that the nanomaterials which enhance the PA effect should allow the development of biophysical rather than biochemical strategies to induce osteoinductive properties into tissue engineering scaffolds.     

Effects of a bone-like mineral film on phenotype of adult human mesenchymal stem cells in vitro

Multipotent cell types are rapidly becoming key components in a variety of tissue engineering schemes, and mesenchymal stem cells (MSCs) are emerging as an important tool in bone tissue regeneration. Although several soluble signals influencing osteogenic differentiation of MSCs in vitro are well-characterized, relatively little is known about the influence of substrate signals. This study was aimed at elucidating the effects of a bone-like mineral (BLM), which is vital in the process of bone bonding to orthopedic implant materials, on the osteogenic differentiation of human MSCs in vitro. Growth of a BLM film (carbonate apatite, Ca/P = 1.55) on poly(lactide-co-glycolide) (PLG) substrates was achieved via surface hydrolysis and subsequent incubation in a modified simulated body fluid. The BLM film demonstrated significantly increased adsorption of fibronectin, and supported enhanced proliferation of human mesenchymal stem cells (hMSCs) relative to PLG substrates. In the absence of osteogenic supplements hMSCs did not display a high expression of osteogenic markers on BLM or PLG. In the presence of osteogenic supplements hMSCs exhibited greater expression of osteogenic markers on PLG substrates than on BLM substrates, as measured by alkaline phosphatase activity and osteocalcin production. Taken together, these data support the concept that substrate signals significantly influence MSC growth and differentiation, highlighting the importance of carrier material composition in stem cell-based tissue engineering schemes.     

Formation of three-dimensional cell/polymer constructs for bone tissue engineering in a spinner flask and a rotating wall vessel bioreactor

The aim of this study is to investigate the effect of the cell culture conditions of three-dimensional polymer scaffolds seeded with rat marrow stromal cells (MSCs) cultured in different bioreactors concerning the ability of these cells to proliferate, differentiate towards the osteoblastic lineage, and generate mineralized extracellular matrix. MSCs harvested from male Sprague-Dawley rats were culture expanded, seeded on three-dimensional porous 75:25 poly(D,L-lactic-co-glycolic acid) biodegradable scaffolds, and cultured for 21 days under static conditions or in two model bioreactors (a spinner flask and a rotating wall vessel) that enhance mixing of the media and provide better nutrient transport to the seeded cells. The spinner flask culture demonstrated a 60% enhanced proliferation at the end of the first week when compared to static culture. On day 14, all cell/polymer constructs exhibited their maximum alkaline phosphatase activity (AP). Cell/polymer constructs cultured in the spinner flask had 2.4 times higher AP activity than constructs cultured under static conditions on day 14. The total osteocalcin (OC) secretion in the spinner flask culture was 3.5 times higher than the static culture, with a peak OC secretion occurring on day 18. No considerable AP activity and OC secretion were detected in the rotating wall vessel culture throughout the 21-day culture period. The spinner flask culture had the highest calcium content at day 14. On day 21, the calcium deposition in the spinner flask culture was 6.6 times higher than the static cultured constructs and over 30 times higher than the rotating wall vessel culture. Histological sections showed concentration of cells and mineralization at the exterior of the foams at day 21. This phenomenon may arise from the potential existence of nutrient concentration gradients at the interior of the scaffolds. The better mixing provided in the spinner flask, external to the outer surface of the scaffolds, may explain the accelerated proliferation and differentiation of marrow stromal osteoblasts, and the localization of the enhanced mineralization on the external surface of the scaffolds.     

Differentiation of bone marrow-derived mesenchymal stem cells into multi-layered epidermis-like cells in 3D organotypic coculture

The interactions of bone marrow-derived mesenchymal stem cells (MSCs) and their engrafted microenvironment are an integral part of signaling control of stem cell lineage commitment. We attempted to induce bone marrow-derived MSCs to undergo epidermal lineage differentiation by manipulating the biochemical, environmental and physical properties of culture conditions in an organotypic coculture model to simulate a skin-specific microenvironment. The induction medium was optimized by varying different biomolecular supplements in a basic stratification medium. A multi-layered epidermis-like structure was established when MSCs were cultured in an optimized induction medium on a contractible fibroblast-embedded collagen gel with an air–liquid interface. The commitment into epidermal lineage was further confirmed by the expression of early and intermediate epidermalization markers – keratin 10 and filaggrin in 90.67% and 80.51% of MSCs, respectively. This study not only highlights the possibility of in vitro control of MSCs into epidermal lineage, but also suggests the therapeutic potential of bone marrow-derived MSCs for skin regeneration.     

Calcification as an indicator of osteoinductive capacity of biomaterials in osteoblastic cell cultures

Mineralized extracellular matrix formation is representative for the osteoinductive capacity of biomaterials and is often tested in vitro. Characteristics of in vitro mineralization of primary rat osteoblastic cells (bone marrow, calvaria, periosteum, fetal and adult long bone) and UMR-106 cells were compared by von Kossa staining, FTIR, X-ray diffractometry, TEM and related to parameters of early (ALP and collagen I formation) and late (osteocalcin secretion) osteoblast expression. All cultures expressed high alkaline phosphatase activity and were able to form bone apatite. However, a nodular versus diffuse mineralization pattern was observed. Bone marrow, calvaria and periosteum (early passage) derived cells mineralized restrictively on the three-dimensional area of a nodule. The extracellular matrix consisted of collagen I fibers, among matrix vesicles loaded with needle-like crystals. Long bone, late passage periosteum derived and UMR-106 cells exhibited a diffuse mineralization pattern. Needle-like crystals were observed between the cells but collagen fibers and matrix vesicles could not be detected. Secretion of osteocalcin was detected in cultures derived from bone marrow and absent in UMR-106 and long bone derived cell cultures. The present study demonstrates that dystrophic calcification can not be distinguished from cell-mediated calcification with von Kossa, FTIR and X-ray diffractometry. Primary osteoblastic cells capable of forming nodules are recommended to evaluate the osteoinductive properties of biomaterials.     

Scaffold porosity and oxygenation of printed hydrogel constructs affect functionality of embedded osteogenic progenitors

Insufficient supply of oxygen and nutrients throughout the graft is considered one of the principal limitations in development of large, tissue-engineered bone grafts. Organ or tissue printing by means of three-dimensional (3D) fiber deposition is a novel modality in regenerative medicine that combines pore formation and defined cell placement, and is used here for development of cell-laden hydrogel structures with reproducible internal architecture to sustain oxygen supply and to support adequate tissue development. In this study we tested the effect of porosity on multipotent stromal cells (MSCs) embedded in hydrogel constructs printed with a 3D fiber deposition (3DF) machine. For this, porous and solid alginate hydrogel scaffolds, with MSCs homogeneously dispersed throughout the construct, were printed and analyzed in vitro for the presence of hypoxia markers, metabolism, survival, and osteogenic differentiation. We demonstrated that porosity promotes oxygenation of MSCs in printed hydrogel scaffolds and supported the viability and osteogenic differentiation of embedded cells. Porous and solid printed constructs were subsequently implanted subcutaneously in immunodeficient mice to analyze tissue formation in relation to hypoxia responses of embedded cells. Implantation of printed grafts resulted in ingrowth of vascularized tissue and significantly enhanced oxygenation of embedded MSCs. In conclusion, the introduction of pores significantly enhances the conductive properties of printed hydrogel constructs and contributes to the functionality of embedded osteogenic progenitors.     

Proliferation and Osteogenic Differentiation of Mesenchymal Stem Cells Cultured onto Three Different Polymers <Emphasis Type="Italic">In Vitro</Emphasis>

In this study, the osteoinductive and cell-binding properties of three different resorbable polymers were evaluated by human mesenchymal stem cells (MSCs). MSCs were isolated, expanded, and cultivated onto resorbable D,D,L,L-polylactide (PLLA), collagen I/III, and polygalactin-910/polydioxanone (PGPD) scaffolds in vitro. To evaluate the influence of dexamethasone, ascorbic acid, and beta-glycerolphosphate (DAG) on osteoblast differentiation, MSCs were incubated in a DAG-enriched medium. After a 28-day period in vitro, the cellular loaded polymers were digested enzymatically by papain and HCl. The Ca(2+) content of the biomembranes was evaluated by an o-kresolphthalein-complexon reaction via photometer. A PicoGreen assay was performed for dsDNA quantification. Significant differences between the number of adherent MSCs were documented (collagen > PLLA > PGPD). Compared to the initial number of adherent cells, all biomaterials induced a significant decrease in cellular adherence after 28 days in vitro. The presence of DAG-enriched culture medium stimulated the cellular proliferation for PLLA and slightly for PGPD, whereas cell proliferation was inhibited when MSCs were cultivated onto collagen I/III. In comparison with the control groups, all biomaterials (PLLA, PGPD, and collagen I/III) showed a significant increase in local Ca(2+) accumulation under DAG stimulation after 28 days in vitro. Furthermore, collagen I/III and PLLA scaffolds showed osteoinductive properties without DAG stimulation. These results were verified by immunocytochemical stainings against osteoblast-typical markers (osteopontin and alkaline phosphatase) and completed by calcified matrix detection (von Kossa staining). MSCs were identified by CD105 and CD13 antigen expression. Corresponding to an absence of CD34, CD45, and collagen II expression, we found no chondrogenic or hematopoietic cell differentiation. The results indicate significant differences for the proliferation, differentiation, adherence, and Ca(2+) accumulation between the tested polymers in a MSC culture.