Bone formation in TiO2 bone scaffolds in extraction sockets of minipigs

The osteoconductive capacity of TiO(2) scaffolds was investigated by analysing the bone ingrowth into the scaffold structure following their placement into surgically modified extraction sockets in Gottingen minipigs. Non-critical size defects were used in order to ensure sufficient bone regeneration for the evaluation of bone ingrowth to the porous scaffold structure, and sham sites were used as positive control. Microcomputed tomographic analysis revealed 73.6±11.1% of the available scaffold pore space to be occupied by newly formed bone tissue, and the volumetric bone mineral density of the regenerated bone was comparable to that of the native cortical bone. Furthermore, histological evidence of vascularization and the presence of bone lamellae surrounding some of the blood vessels were also observed within the inner regions of the scaffold, indicating that the highly interconnected pore structure of the TiO(2) scaffolds supports unobstructed formation of viable bone tissue within the entire scaffold structure. In addition, bone tissue was found to be in direct contact with 50.0±21.5% of the TiO(2) struts, demonstrating the good biocompatibility and osteoconductivity of the scaffold material.     

Discontinuous release of bone morphogenetic protein-2 loaded within interconnected pores of honeycomb-like polycaprolactone scaffold promotes bone healing in a large bone defect of rabbit ulna

The choice of an appropriate carrier and its microarchitectural design is integral in directing bone ingrowth into the defect site and determining its subsequent rate of bone formation and remodeling. We have selected a three-dimensional polycaprolactone (PCL) scaffold with an interconnected honeycomb-like porous structure to provide a conduit for vasculature ingrowth as well as an osteoconductive pathway to guide recruited cells responding to a unique triphasic release of osteoinductive bone morphogenetic proteins (BMP) from these PCL scaffolds. We hypothesize that the use of recombinant human bone morphogenetic protein 2 (rhBMP2)-PCL constructs promotes rapid union and bone regeneration of a large defect. Results of our pilot study on a unilateral 15 mm mid-diaphyseal segmental rabbit ulna defect demonstrated enhanced bone healing with greater amount of bone formation and bridging under plain radiography and microcomputed tomography imaging when compared with an empty PCL and untreated group after 8 weeks postimplantation. Quantitative measurements showed significantly higher bone volume fraction and trabecular thickness, with lower trabecular separation in the rhBMP2-treated groups. Histology evaluation also revealed greater mature bone formation spanning across the entire scaffold region compared with other groups, which showed no bone regeneration within the central defect zone. We highlight that it is the uniqueness of the scaffold having a highly porous network of channels that promoted vascular integration and allowed for cellular infiltration, leading to a discontinuous triphasic BMP2 release profile that mimicked the release profile during natural repair mechanisms in vivo. This study serves as preclinical evidence demonstrating the potential of combining osteoinductive rhBMP2 with our PCL constructs for the repair of large defects in a large animal model.     

生物可降解支架协同纤维蛋白凝胶运载BMP-2基因修复节段性骨缺损

将BMP-2腺病毒载体(Ad-BMP-2)与纤维蛋白凝胶混合后复合PLA／PCL(聚乳酸／聚己内酯)支架,移植修复骨缺损。于新西兰大耳白兔双侧桡骨中段造成1．5 cm骨缺损,采用四种方法进行处理:A组:Ad-BMP-2 纤维蛋白凝胶 PLA／PCL;B组:重组BMP-2 纤维蛋白凝胶 PLA／PCL;C组:对照基因(Ad-Lacz) 纤维蛋白凝胶 PLA／PCL;D组:纤维蛋白凝胶 PLA／PCL。结果表明,术后12周A组缺损区在成骨活跃程度、骨再生量和再生髓腔结构等方面均显著优于B组,其骨缺损得到了较彻底的修复。C、D两组均不能产生骨性愈合。PLA／PCL协同纤维蛋白凝胶运载BMP-2基因修复节段性骨缺损可达到较好的效果。     

Repair of calvarial defects with customised tissue-engineered bone grafts II. Evaluation of cellular efficiency and efficacy in vivo

We have demonstrated in Part I of this study [see Schantz, J.-T., et al., Tissue Eng. 2003;9(Suppl. 1): S-113-S-126; this issue] that bone marrow-derived progenitor cells and calvarial osteoblasts could be successfully directed into the osteogenic lineage and cultured in three-dimensional (3-D) polycaprolactone (PCL) scaffolds. The objective of the second part of the study was to evaluate and to compare tissue engineered cell-polymer constructs using calvarial osteoblasts (group I) and mesenchymal progenitor cells (MPCs; group II) for the reconstruction of critical-size and three-dimensionally complex cranial defects. In 30 New Zealand White rabbits, bilateral parietal critical-size defects were created. On the basis of computed tomography scans, customized PCL scaffolds with precisely controlled microarchitecture were fabricated, using a rapid prototyping technology. Bone marrow-derived progenitor cells and osteoblasts were isolated and expanded in culture. Osteoblasts (group I) and mesenchymal progenitor cells (group II) were seeded in combination with a fibrin glue suspension into 40 PCL scaffolds. After incubating for 3 days in static culture, the PCL scaffold-cell constructs as well as nonseeded PCL scaffolds (control group) were implanted into 15-mm-diameter calvarial defects. Reconstruction of the cranium and bone formation were evaluated after 3 months. In vivo results indicated osseous tissue integration within the implant and functionally stable restoration of the calvarium. Islands of early bone formation could be observed in X-ray radiographs and in histological sections. Implants showed a high cell:ECM ratio and a dense vascular network. Mechanical testing of the reconstructed area revealed partial integration with the surrounding corticocancellous calvarial bone. The amount (area) of calcification, measured by clinical computed tomography, indicated that cell-seeded constructs measured about 60% more than unrepaired or unseeded scaffolds. Mechanical investigations revealed that stiffness reached 52 +/- 29 and 44 +/- 16 MPa for MPC- and osteoblast-seeded scaffolds, respectively. The yield strength for the push-out tests was 180 +/- 36 N for normal calvarial bone, 90 +/- 1 N for unrepaired site, and 106 +/- 10 N for unseeded constructs, which is about 60% of normal bone strength. MPC- and osteoblast-seeded scaffolds indicated a yield strength of 149 +/- 15 and 164 +/- 42 N, respectively, which is about 85-90% of normal bone. This study demonstrated that customized biodegradable polymeric implants may be used to deliver osteogenic cells and enhance bone formation within critically-sized defects in vivo. The use of rapid prototyping technology to produce scaffolds with controlled external geometry and microarchitecture offers new possibilities in the functional and aesthetic reconstruction of complex craniofacial defects.     

In vitro and in vivo evaluation of a novel nanosize hydroxyapatite particles/poly(ester-urethane) composite scaffold for bone tissue engineering

Scaffolds for bone tissue engineering should provide an osteoconductive surface to promote the ingrowth of new bone after implantation into bone defects. This may be achieved by hydroxyapatite loading of distinct scaffold biomaterials. Herein, we analyzed the in vitro and in vivo properties of a novel nanosize hydroxyapatite particles/poly(ester-urethane) (nHA/PU) composite scaffold which was prepared by a salt leaching–phase inverse process. Microtomography, scanning electron microscopy and X-ray spectroscopy analyses demonstrated the capability of the material processing to create a three-dimensional porous PU scaffold with nHA on the surface. Compared to nHA-free PU scaffolds (control), this modified scaffold type induced a significant increase in in vitro adsorption of model proteins. In vivo analysis of the inflammatory and angiogenic host tissue response to implanted nHA/PU scaffolds in the dorsal skinfold chamber model indicated that the incorporation of nHA particles into the scaffold material did not affect biocompatibility and vascularization when compared to control scaffolds. Thus, nHA/PU composite scaffolds represent a promising new type of scaffold for bone tissue engineering, combining the flexible material properties of PU with the advantage of an osteoconductive surface.     

Diaphragmatic muscle reconstruction with an aligned electrospun poly(ε-caprolactone)/collagen hybrid scaffold

Large diaphragmatic muscle defects in congenital diaphragmatic hernia (CDH) are reconstructed by prosthetic materials or autologous grafts, which are associated with high complications and reherniation. In this study we examined the feasibility of using aligned electrospun poly(ε-caprolactone) (PCL)/collagen hybrid scaffolds for diaphragmatic muscle reconstruction. The hybrid scaffolds were implanted into a central left hemi-diaphragmatic defect (approximately 70% of the diaphragmatic tissue on the left side) in rats. Radiographic and magnetic resonance imaging (MRI) analyses showed no evidence of herniation or retraction up to 6 months after implantation. Histological and immunohistochemical evaluations revealed ingrowth of muscle tissue into the scaffolds. The mechanical properties of the retrieved diaphragmatic scaffolds were similar to those of normal diaphragm at the designated time points. Our results show that the aligned electrospun hybrid scaffolds allowed muscle cell migration and tissue formation. The aligned scaffolds may provide implantable functional muscle tissues for patients with diaphragmatic muscle defects.     

Porous alginate/poly(ε-caprolactone) scaffolds: preparation, characterization and in vitro biological activity

In bone tissue engineering, scaffolds with controlled porosity are required to allow cell ingrowth, nutrient diffusion and sufficient formation of vascular networks. The physical properties of synthetic scaffolds are known to be dependent on the biomaterial type and its processing technique. In this study, we demonstrate that the separation phase technique is a useful method to process poly(ε-caprolactone) (PCL) into a desired shape and size. Moreover, using poly(ethylene glycol), sucrose, fructose and Ca2+ alginate as porogen agents, we obtained PCL scaffolds with three-dimensional porous structures characterized by different pore size and geometry. Scanning electron microscopy and porosity analysis indicated that PCL scaffolds prepared with Ca2+ alginate threads resemble the porosity and the homogeneous pore size distribution of native bone. In parallel, MicroCT analysis confirmed the presence of interconnected void spaces suitable to guarantee a biological environment for cellular growth, as demonstrated by a biocompatibility test with MC3T3-E1 murine preosteoblastic cells. In particular, scaffolds prepared with Ca2+ alginate threads increased adhesion and proliferation of MC3T3-E1 cells under basal culture conditions, and upon stimulation with a specific differentiation culture medium they enhanced the early and later differentiated cell functions, including alkaline phosphatase activity and mineralized extracellular matrix production. These results suggest that PCL scaffolds, obtained by separation phase technique and prepared with alginate threads, could be considered as candidates for bone tissue engineering applications, possessing the required physical and biological properties.     

Biodegradable porous polyurethane scaffolds for tissue repair and regeneration

Critical-size bone defects usually require the insertion of autogenous bone graft to heal. Harvesting of bone is traumatic and results in high morbidity at the donor site. A potential alternative to bone graft may be a bone substitute with adequate biocompatibility and biological properties produced from ceramics or bioresorbable/biodegradable polymers. In the present study, new elastomeric biodegradable polyurethanes with an enhanced affinity toward cells and tissues were synthesized using aliphatic diisocyanate, poly(epsilon-caprolactone) diol, and biologically active 1,4:3,6-dianhydro-D-sorbitol (isosorbide diol) as chain extender. The polymers were processed into 3D porous scaffolds by applying a combined salt leaching-phase inverse process. The critical parameters controlling pore size and geometry were the solvents and nonsolvents used for scaffold preparation and the sizes of the solid porogen crystals. Scaffolds prepared from the polymer solution in solvents such as dimethylsulfoxide or methyl-2-pyrrolidone did not have a homogenous pore structure. Many pores were interconnected, but numerous pores were closed. Irrespective of the high pore-to-volume ratio (75%), the scaffolds showed poor water permeability. The best solvent for the preparation of scaffolds from the polyurethane used in the study was dimethylformamide (DMF). The type of nonsolvent admixed to the polymer solution in DMF strongly affected the scaffolds' pore structure. The elastomeric polyurethane scaffold prepared from the optimal solvent-nonsolvent mixture had regular interconnected pores, high water permeability, and a pore-to-volume ratio of 90%. The osteoconductive properties of the 3D porous polyurethane scaffolds can be additionally promoted by loading them with calcium phosphate salts such as hydroxyapatite or tricalcium phosphate, thus making them promising candidates for bone graft substitutes.     

Evaluation of the growth of chondrocytes and osteoblasts seeded into precision scaffolds fabricated by fused deposition manufacturing

In this study, fused deposition manufacturing (FDM) was utilized to fabricate the precision scaffolds for cartilage and bone regeneration. Cell seeding into such scaffolds was evaluated. For poly(D,l-lactide) (PLA) scaffolds used for cartilage regeneration, the structure with larger inner space, four direction stacking (4D) and small interval of fibers were better. Chondrocyte proliferated well with matrix accumulation in precision scaffolds coated with type II collagen at 4 weeks of in vitro culture. The seeding efficiency of osteoblasts in most polycaprolactone (PCL) scaffolds used for bone regeneration could arrive 50% of original cell seeding density, and the amount of cells in scaffolds increased to double fold after 2 weeks of in vitro culture. The histological cross-section also revealed proliferation and mineralization of osteoblasts among the PCL fibers. The results indicated that the highly porous and interconnected structure of precision scaffolds could benefit cell ingrowth.     

PLDLA mesh and 60/40 biphasic calcium phosphate in iliac crest regeneration in the goat

Although morbidity of the iliac crest after grafting has been reported to occur frequently, it is the most widely used donor site. A proper regeneration of the defect could decrease morbidity. The purpose of this study was to evaluate the efficacy of two types of reconstruction of standardized critical size defects of the iliac crest after 3, 6, and 12 months. Standardized critical defects in iliac crests were bilaterally reconstructed in 28 goats randomly with (1) no reconstruction (group A); (2) a bioresorbable polylactide mesh (group B); or (3) 60/40 biphasic calcium phosphate (BCP) granules placed within a bioresorbable mesh (group C). At follow up, the iliac crests were harvested for histologic, histomorphometric, and radiologic analyses. The defects treated with "mesh-BCP" (group C) showed a significantly (p = 0.03) larger area with diffuse bone formation, while only a small area of high density trabecular bone ingrowth was observed in the "no reconstruction" (group A) and "mesh group" (group B). However, no difference in the total volume of bone was observed; in group C, the bone was more diffusely spread over the defect. Substitution of the BCP granules by trabecular bone did not start before 6 months. At the 12 months time point, extensive resorption of BCP was found because of phagocytic activity of numerous multinucleated giant cells. We confirm the positive influence of BCP on bone formation but due to a slow rate of resorption of BCP, regeneration takes a relatively long period of time.     

The promotion of mandibular defect healing by the targeting of S1P receptors and the recruitment of alternatively activated macrophages

Endogenous signals originating at the site of injury are involved in the paracrine recruitment, proliferation, and differentiation of circulating progenitor and diverse inflammatory cell types. Here, we investigate a strategy to exploit endogenous cell recruitment mechanisms to regenerate injured bone by local targeting and activation of sphingosine-1-phosphate (S1P) receptors. A mandibular defect model was selected for evaluating regeneration of bone following trauma or congenital disease. The particular challenges of mandibular reconstruction are inherent in the complex anatomy and function of the bone given that the area is highly vascularized and in close proximity to muscle. Nanofibers composed of poly(dl-lactide-co-glycolide) (PLAGA) and polycaprolactone (PCL) were used to delivery FTY720, a targeted agonist of S1P receptors 1 and 3. In vitro culture of bone progenitor cells on drug-loaded constructs significantly enhanced SDF1α mediated chemotaxis of bone marrow mononuclear cells. In vivo results show that local delivery of FTY720 from composite nanofibers enhanced blood vessel ingrowth and increased recruitment of M2 alternatively activated macrophages, leading to significant osseous tissue ingrowth into critical sized defects after 12 weeks of treatment. These results demonstrate that local activation of S1P receptors is a regenerative cue resulting in recruitment of wound healing or anti-inflammatory macrophages and bone healing. Use of such small molecule therapy can provide an alternative to biological factors for the clinical treatment of critical size craniofacial defects.     

VEGF-mediated angiogenesis and vascularization of a fumarate-crosslinked polycaprolactone (PCLF) scaffold

Purpose: Revascularization of natural and synthetic scaffolds is a critical part of the scaffold’s incorporation and tissue ingrowth. Our goals were to create a biocompatible polymer scaffold with 3D-printing technology, capable of sustaining vascularization and tissue ingrowth. Methods: We synthesized biodegradable polycaprolactone fumarate (PCLF) scaffolds to allow tissue ingrowth via large interconnected pores. The scaffolds were prepared with Poly(lactic-co-glycolic acid)(PLGA) microspheres seeded with or without different growth factors including VEGF,FGF-2, and/or BMP-2. Scaffolds were implanted into the subcutaneous tissues of rats before undergoing histologic and microCT angiographic analysis.

Results: At harvest after 12 weeks, scaffolds had tissue infiltrating into their pores without signs of scar tissue formation, fibrous capsule formation, or immune responses against PCLF. Histology for M1/M2 macrophage phenotypes confirmed that there were no overt signs of immune responses. Both microCT angiography and histologic analysis demonstrated marked tissue and vessel ingrowth throughout the pores traversing the body of the scaffolds. Scaffolds seeded with microspheres containing VEGF or VEGF with either BMP-2 or FGF-2 had significantly higher vascular ingrowth and vessel penetration than controls. All VEGF-augmented scaffolds were positive for Factor-VIII and exhibited collagen tissue infiltration throughout the pores. Furthermore, scaffolds with VEGF and BMP-2 had high levels of mineral deposition throughout the scaffold that are attributable to BMP-2.

Conclusions: PCLF polymer scaffold can be utilized as a framework for vascular ingrowth and regeneration of multiple types of tissues. This novel scaffold material has promise in tissue regeneration across all types of tissues from soft tissue to bone.     

Biomimetic porous scaffolds with high elasticity made from mineralized collagen--an animal study

Histological investigations of a new hydroxyapatite-collagen composite material were carried out to evaluate its possible suitability as a bone substitute. The three-dimensional scaffolds made from biomimetically mineralized collagen exhibit an interconnecting pore structure and elastic mechanical properties. They were implanted into the subcutaneous tissue and bone defects made in the femur of rats and harvested with the surrounding tissue at 1, 2, 4, 8, and 12 weeks after surgery. The materials implanted in the subcutaneous tissue were covered by fibrous connective tissue with a slight inflammatory response, and many foreign-body giant cells were observed on the surface of the scaffolds. Most of the material implanted in the subcutaneous tissue was resorbed at 8 weeks by phagocytosis. In the bone defects, new bone formation was observed on the surface of the material at 1 week. New bone increased with time, and osteoclasts were seen on the surface of the scaffolds at 2 weeks. Resorption and replacement by new bone of many parts of the materials implanted in the femur were observed by 12 weeks. These responses occurred faster than those of other hydroxyapatite-collagen composites. The results suggested that the new biomimetically mineralized collagen scaffolds were suitable as an implant material for bone-tissue reconstruction.     

Combination of platelet-rich plasma with polycaprolactone-tricalcium phosphate scaffolds for segmental bone defect repair

Porous scaffold biomaterials may offer a clinical alternative to bone grafts; however, scaffolds alone are typically insufficient to heal large bone defects. Numerous studies have demonstrated that osteoinductive growth factor or gene delivery significantly improves bone repair. However, given the important role of vascularization during bone regeneration, it may also be beneficial to incorporate factors that promote vascular ingrowth into constructs. In this study, a strategy combining structural polycaprolactone-20% tricalcium phosphate (PCL-TCP) composite scaffolds with platelet-rich plasma (PRP) was tested. Following bilateral implantation of constructs into 8 mm rat nonunion femoral defects, 3D vascular and bone ingrowth were quantified at 3 and 12 weeks using contrast-enhanced microcomputed tomography (micro-CT) imaging. At week 3, PRP-treated femurs displayed 70.3% higher vascular volume fraction than control femurs. Interestingly, bone volume fraction (BVF) was significantly higher for the empty scaffold group at the early time point. At 12 weeks, BVF measurements between the two groups were statistically equivalent. However, a greater proportion of PRP-treated femurs (83%) achieved bone union as compared to empty scaffold controls (33%). Consistent with this observation, biomechanical evaluation of functional integration also revealed a significantly higher torsional stiffness observed for PRP-treated defects compared to empty scaffolds. Ultimate torque at failure was not improved, however, perhaps due to the slow resorption profile of the scaffold material. Histological evaluation illustrated infiltration of vascularized connective tissue and bone in both groups. Given that bone ingrowth into untreated defects in this model is minimal, PCL-TCP scaffolds were clearly able to promote bone ingrowth but failed to consistently bridge the defect. The addition of PRP to PCL-TCP scaffolds accelerated early vascular ingrowth and improved longer-term functional integration. Taken together, the results of this study suggest that the use of PRP, alone or in combination with other bioactive components, may be an effective approach to augment the ability of porous biomaterial scaffolds to repair orthotopic defects.     

Investigation as to the osteoinductivity of macroporous calcium phosphate cement in goats

For bone formation in critical-sized or poor healing defects, osteoinductive behavior of synthetic bone grafts is crucial. Although the osteoconductive behavior of calcium phosphate (CaP) cement is generally accepted, its osteoinductive potential is less reported. In this study, osteoinduction of porous CaP cement was investigated. Four goats received each six subcutaneous placed prehardened porous CaP cement implants. Implantation time was 3 and 6 months. After explantation, histological evaluation and scoring with a histological grading scale for soft-tissue implants were performed. The histological sections revealed that the implants degraded for more than 50% over time. The implants had lost their macroporous structure from 3 months on. A medium-thick fibrous capsule with a few inflammatory cells surrounded the implants after 3 months. This capsule significantly decreased in thickness after 6 months. Throughout the implant ingrowth of fibrous tissue was seen with scattered foci of inflammatory cells. Cement particles were surrounded by a layer of inflammatory cells. The massive inflammatory response in the interstice was seen after 3 months, which disappeared after 6 months implantation. No bone formation was detected in any of the specimens. The fast degradation and thereby collapsing of the porous structure of our CaP cement implant might have prevented osteoinduction.     

The performance of poly-epsilon-caprolactone scaffolds in a rabbit femur model with and without autologous stromal cells and BMP4

The ability of a cellular construct to guide and promote tissue repair strongly relies on three components, namely, cell, scaffold and growth factors. We aimed to investigate the osteopromotive properties of cellular constructs composed of poly-epsilon-caprolactone (PCL) and rabbit bone marrow stromal cells (BMSCs), or BMSCs engineered to express bone morphogenetic protein 4 (BMP4). Highly porous biodegradable PCL scaffolds were obtained via phase inversion/salt leaching technique. BMSCs and transfected BMSCs were seeded within the scaffolds by using an alternate flow perfusion system and implanted into non-critical size defects in New Zealand rabbit femurs. In vivo biocompatibility, osteogenic and angiogenic effects induced by the presence of scaffolds were assessed by histology and histomorphometry of the femurs, retrieved 4 and 8 weeks after surgery. PCL without cells showed scarce bone formation at the scaffold-bone interface (29% bone/implant contact and 62% fibrous tissue/implant contact) and scarce PCL resorption (16%). Conversely, PCL seeded with autologous BMSCs stimulated new tissue formation into the macropores of the implant (20%) and neo-tissue vascularization. Finally, the BMP4-expressing BMSCs strongly favoured osteoinductivity of cellular constructs, as demonstrated by a more extensive bone/scaffold contact.     

In vitro mineralization and bone osteogenesis in poly(ε-caprolactone)/gelatin nanofibers

The implementation of bio-inspired strategies in developing scaffolds for the reconstruction of oral, craniofacial and bone skeletal tissues after injury or resection remains a challenge. Currently, advanced scaffolds comprising nanofibers endowed with biochemical/biophysical signaling capability offer great advantages in bone regeneration, because of their faithful mimesis of the characteristic size scales encountered in the fibrous network of the native extracellular matrix (ECM). In this study, we investigate the biological potential of nanofibers made of polycaprolactone and gelatin on guiding the regenerative mechanisms of bone. Contact angle measurements and environmental SEM investigations indicate a weak linkage of gelatin molecules to PCL chains, facilitating an efficient adhesion signal to cells up to 3 days of culture. In vitro studies performed on human mesenchymal stem cells (hMSC) until 3 weeks in culture medium with osteogenic supplementation, clearly showing the effectiveness of PCL/Gelatin electrospun scaffolds in promoting bone osteogenesis and mineralization. The increase of alkaline phosphatase activity (ALP) and gene expression of bone-related molecules (bone sialoprotein, osteopontin and osteocalcin), indicated by immunodetection and upregulation level of mRNA, confirm that proposed nanofibers promote the osteogenic differentiation of hMSC, preferentially in osteogenic medium. Moreover, the evidence of newly formed collagen fibers synthesis by SIRCOL and their mineralization evaluated by Alizarin Red staining and EDS mapping of the elements Ca, P and Mg corroborate the idea that native osteoid matrix is ultimately deposited. All these data suggest that PCL and gelatin electrospun nanofibers have great potential as osteogenesis promoting scaffolds for successful application in bone surgery. ? 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 100A:3008-3019, 2012.     

Preparation and characterization of a three-dimensional printed scaffold based on a functionalized polyester for bone tissue engineering applications

At present there is a strong need for suitable scaffolds that meet the requirements for bone tissue engineering applications. The objective of this study was to investigate the suitability of porous scaffolds based on a hydroxyl functionalized polymer, poly(hydroxymethylglycolide-co-ε-caprolactone) (pHMGCL), for tissue engineering. In a recent study this polymer was shown to be a promising material for bone regeneration. The scaffolds consisting of pHMGCL or poly(ε-caprolactone) (PCL) were produced by means of a rapid prototyping technique (three-dimensional plotting) and were shown to have a high porosity and an interconnected pore structure. The thermal and mechanical properties of both scaffolds were investigated and human mesenchymal stem cells were seeded onto the scaffolds to evaluate the cell attachment properties, as well as cell viability and differentiation. It was shown that the cells filled the pores of the pHMGCL scaffold within 7 days and displayed increased metabolic activity when compared with cells cultured in PCL scaffolds. Importantly, pHMGCL scaffolds supported osteogenic differentiation. Therefore, scaffolds based on pHMGCL are promising templates for bone tissue engineering applications.     

Reconstruction of critical size calvarial bone defects in rabbits with glass-fiber-reinforced composite with bioactive glass granule coating

The aim of this study was to evaluate glass-fiber-reinforced composite as a bone reconstruction material in the critical size defects in rabbit calvarial bones. The bone defect healing process and inflammatory reactions were evaluated histologically at 4 and 12 weeks postoperatively. Possible neuropathological effects on brain tissue were evaluated. The release of residual monomers from the fiber-reinforced composite (FRC) was analyzed by high performance liquid chromatograph (HPLC). RESULTS: At 4 weeks postoperatively, fibrous connective tissue ingrowth to implant structures was seen. Healing had started as new bone formation from defect margins, as well as woven bone islets in the middle of the defect. Woven bone was also seen inside the implant. Inflammation reaction was slight. At 12 weeks, part of the new bone had matured to lamellar-type, and inflammation reaction was slight to moderate. Control defects had healed by fibrous connective tissue. Histological examinations of the brain revealed no obvious damage to brain morphology. In HPLC analysis, the release of residual 1,4-butanedioldimethacrylate and methylmethacrylate from polymerized FRC was low. CONCLUSIONS: This FRC-implant was shown to promote the healing process of critical size calvarial bone defect in rabbits. After some modifications to the material properties, this type of implant has the potential to become an alternative for the reconstruction of bone defects in the head and neck area in the future.