Evaluation of Root Canal Configuration of Maxillary Molars in a Brazilian Population Using Cone-beam Computed Tomographic Imaging: An In Vivo Study

Introduction

The aim of this study was to analyze and characterize root canal morphology of maxillary molars of the Brazilian population using cone-beam computed tomographic (CBCT) imaging.

Methods

Patients referred for a CBCT radiographic examination for accurate diagnosis and treatment planning were enrolled in the study. A total of 620 healthy, untreated, fully developed maxillary first and second molars were included (314 first molars and 306 second molars). The following observations were recorded: (1) number of roots and their morphology, (2) number of canals per root, (3) fused roots, and (4) primary variations in the morphology of the root canal systems.

Results

First and second molars showed a higher prevalence of 3 separate roots, mesiobuccal, distobuccal, and palatal, with 1 canal in each root (52.87% and 45.09%, respectively). Two canals in the mesiobuccal roots represented 42.63% of teeth, whereas mesiobuccal roots of second molars presented 2 canals in 34.32%. The most common anatomic variation in the maxillary first molar was related to the root canal configuration of the mesiobuccal root, whereas the root canal system of the maxillary second molar teeth showed more anatomic variables.

Conclusions

Mesiobuccal roots of maxillary molar teeth had more variation in their canal system than the distobuccal or palatal roots. The root canal configuration of the maxillary second molars was more variable than the first molars in a Brazilian population. CBCT imaging is a clinically useful tool for endodontic diagnosis and treatment planning.     

Three Root Canals in the Mesiobuccal Root of Maxillary Molars: Case Reports and Literature Review

Introduction

The knowledge of root canal anatomy is essential to ensure a successful outcome of surgical and nonsurgical root canal treatment. The aims of this article were to present 2 cases of maxillary molars with 3 mesiobuccal root canals and to review the available literature on this anatomic variation.

Methods

The first case described a nonsurgical root canal treatment of tooth #16 in a 29-year-old man with the aid of a dental operating microscope. In the second case, an extracted maxillary right first molar was scanned by a micro–computed tomographic system and reconstructed 3-dimensionally using modeling software.

Results

In both cases, the mesiobuccal root had 3 canals (type 3-2 in case I and type 3-3 in case II), whereas the distobuccal and palatal roots had a single canal. The literature review showed that the overall incidence of 3-canaled mesiobuccal roots in maxillary molars ranged from 1.3%–2.4% and that the most common root canal configuration was type 3-2.

Conclusions

Clinicians should always anticipate the presence of extra canals in maxillary molars and use all the available tools to locate and treat these.     

A Cone-beam Computed Tomographic Study of Root and Canal Morphology of Maxillary First and Second Permanent Molars in a Thai Population

Introduction

Understanding tooth anatomy is crucial for effective endodontic treatment. This study investigated the roots and root canal morphology of maxillary first and second permanent molars in a Thai population using cone-beam computed tomographic (CBCT) imaging.

Comparison of Alternative Image Reformatting Techniques in Micro–Computed Tomography and Tooth Clearing for Detailed Canal Morphology

Introduction

Micro–computed tomography (MCT) shows detailed root canal morphology that is not seen with traditional tooth clearing. However, alternative image reformatting techniques in MCT involving 2-dimensional (2D) minimum intensity projection (MinIP) and 3-dimensional (3D) volume-rendering reconstruction have not been directly compared with clearing. The aim was to compare alternative image reformatting techniques in MCT with tooth clearing on the mesiobuccal (MB) root of maxillary first molars.

Methods

Eighteen maxillary first molar MB roots were scanned, and 2D MinIP and 3D volume-rendered images were reconstructed. Subsequently, the same MB roots were processed by traditional tooth clearing. Images from 2D, 3D, 2D + 3D, and clearing techniques were assessed by 4 endodontists to classify canal configuration and to identify fine anatomic structures such as accessory canals, intercanal communications, and loops.

Results

All image reformatting techniques in MCT showed detailed configurations and numerous fine structures, such that none were classified as simple type I or II canals; several were classified as types III and IV according to Weine classification or types IV, V, and VI according to Vertucci; and most were nonclassifiable because of their complexity. The clearing images showed less detail, few fine structures, and numerous type I canals. Classification of canal configuration was in 100% intraobserver agreement for all 18 roots visualized by any of the image reformatting techniques in MCT but for only 4 roots (22.2%) classified according to Weine and 6 (33.3%) classified according to Vertucci, when using the clearing technique.

Conclusions

The combination of 2D MinIP and 3D volume-rendered images showed the most detailed canal morphology and fine anatomic structures.     

Root and Root Canal Morphology in Maxillary Second Molar with Fused Root from a Native Chinese Population

Introduction

Root fusion is an anatomic variation in maxillary second molars (MSMs); however, the nature of this canal morphology as it relates to its root anatomy has not been fully clarified. The purpose of this study was to investigate the relationship between features of fused roots and root canal anatomy in MSMs using micro–computed tomographic imaging.

Methods

One hundred eighty-seven extracted MSMs were scanned with the μCT50 (Scanco Medical, Bassersdorf, Switzerland), and their root and canal morphology was classified and analyzed using the classifications proposed by Yang and Vertucci. The number and position of canals that merged were recorded and compared among different root fusion types.

Results

One hundred eight (57.75%) MSMs had 3 separate roots, and 79 (42.25%) had fused roots. Of the 79 fused roots, 22 showed partial canal merging, and 6 had complete canal merging. Canal merging was found with teeth with 3-root fusion more often than in those with 2-root fusion (P < .05). Of 28 merged canals, 16 occurred between mesiobuccal and distobuccal canals and 9 among mesiobuccal, distobuccal, and palatal canals.

Conclusions

MSMs with fused roots may present a complicated root canal system as a result of canal merging.     

A micro-computed tomography study of canal configuration of multiple-canalled mesiobuccal root of maxillary first molar

Objectives

Detailed information of complex anatomical configuration of mesiobuccal (MB) root is essential for successful endodontic treatment in maxillary first molars. The aims of this study were to investigate the configuration types present in multiple-canalled MB roots of maxillary first molars using micro-computed tomography (μCT) and to evaluate whether further modification to current configuration classifications are needed for in-depth morphology study of MB root canal system.

Materials and methods

One hundred and fifty-four extracted human maxillary first molar MB roots were scanned by μCT (Skyscan) and their canals were reconstructed by 3D modeling software. Root canal configurations were categorized according to the classifications proposed by Weine and Vertucci. Canal configurations that did not fit into both classifications were categorized as non-classifiable.

Results

One hundred and thirteen (73.4 %) MB roots had multiple canals. The most predominant canal configuration was Weine type III (two orifices and two foramens). Thirty-three (29.2 %) and 20 (17.7 %) MB roots had non-classifiable configuration types that could not be classified by the Weine and Vertucci classification, respectively. Three configurations (types 1–3, 2–3–2–3–2, and 2–3–4–3–2) were first reported in maxillary first molar MB roots.

Conclusions

The present μCT study provided an in-depth analysis of canal configurations of the MB roots of maxillary first molar and suggests that additional modification of current configuration classifications may be needed to more accurately reflect the morphology configurations of MB roots.

Clinical relevance

Clinicians should consider the complex canal configurations of the maxillary first molar MB roots during surgical or nonsurgical endodontic procedures.     

CBCT法研究上颌第一磨牙根管形态

目的：探讨应用锥形束CT研究上颌第一磨牙牙根及根管形态的价值。方法选取70例患者83颗上颌第一磨牙的锥形束CT（cone beam computed tomogaphy,CBCT）影像,分析其牙根数目、根管数目及根管系统的解剖结构。参照Vertucci分类法对根管形态进行分类,统计近中颊根第二根管（the seconal mesiobuual canal, MB2）率。结果83颗上颌第一磨牙均为3个独立牙根,其中MB2的发生率为38.6%,近中颊根根管VertucciⅠ型（1?1）、Ⅳ型（2?2型）、Ⅱ型（2?1）、Ⅲ型（1?2?1）所占百分比分别为61.4%、18.1%、15.7%和4.8%。结论上颌第一磨牙根管系统复杂,CBCT影像可反映真实根管形态,为根管治疗提供参考。     

Differences on the Root and Root Canal Morphologies between Asian and White Ethnic Groups Analyzed by Cone-beam Computed Tomography

Introduction

Populations from different geographic regions and ethnic backgrounds may present differences in dental morphology. The aim of this study was to compare the differences in root and root canal configurations on Asian and white subpopulations using cone-beam computed tomographic imaging.

Endodontic management of a maxillary first molar with eight root canal systems evaluated using cone-beam computed tomography scanning: a case report

Introduction

Root canal treatment of maxillary molars presenting with complex root canal configurations can be diagnostically and technically challenging.

Methods

Nonsurgical endodontic therapy of a left maxillary first molar with three roots and eight root canals was successfully performed. This unusual morphology was diagnosed using a dental operating microscope (DOM) and confirmed with the help of cone-beam computed tomography (CBCT) images.

Results

CBCT axial images showed that both the mesiobuccal and distobuccal root contained a Sert and Bayirli type XV canal, whereas the palatal root showed a Vertucci type II canal configuration.

Conclusions

The use of a DOM and CBCT imaging in endodontically challenging cases can facilitate a better understanding of the complex root canal anatomy, which ultimately enables the clinician to explore the root canal system and clean, shape, and obturate it more efficiently.     

Prevalence of Second Mesiobuccal Canals in Maxillary First Molars Detected Using Cone-beam Computed Tomography,Direct Occlusal Access,and Coronal Plane Grinding

Introduction

The purpose of this study was to determine the prevalence of the second mesiobuccal canal (MB2) in 100 maxillary first molars using 3 independent methods and a combination method.

Analisi della morfologia radicolare e canalare di molari superiori ed inferiori in una popolazione Caucasica: studio in vivo alla CBCT

AimTo investigate the root and canal morphology of maxillary and mandibular permanent molar teeth in a Caucasian population by using Cone Beam Computed Tomography (CBCT).MethodsA total of 596 permanent molars were included. The number of roots, the number of canals per root and the root canal configurations according to the method of Vertucci were recorded.ResultsAlmost all of maxillary first molars (95.7%) had three separate roots; however, 40.3% of mesiobuccal roots had two canals (MB2). Of 157 maxillary second molars, 88.5% had three roots. Among the mesiobuccal roots, 15.1% had two canals. The majority of mandibular molars (100% of first molars, 89.4% of second molars) had two separate roots. Most distal roots had a simple type I configuration, whereas mesial roots had more complex canal systems, with more than one canal.ConclusionsCBCT is an efficient method of studying root canal systems.     

A Rare Root Canal Configuration of Bilateral Maxillary First Molar with 7 Root Canals Diagnosed Using Cone-beam Computed Tomographic Scanning: A Case Report

Introduction

The complexity of the root canal system of maxillary molars presents a constant challenge in the diagnosis and treatment of these teeth. This case report describes the importance of a surgical operating microscope and cone-beam computed tomographic (CBCT) imaging.

Methods

Root canal treatment of a left maxillary first molar with 3 roots and 7 canals was successfully performed. Seven canals were identified with the help of a surgical operating microscope and CBCT imaging. CBCT images also confirmed the 3 roots and 7 canals in the right maxillary first molar.

Results

CBCT images confirmed a type IV canal pattern in the distal and palatal root, whereas the mesial root had a type VIII canal pattern.

Conclusions

The use of a surgical operating microscope and CBCT imaging helps the clinician to diagnose unusual anatomy of a tooth and facilitate successful endodontic treatment.     

Morphology of Mandibular First Molars Analyzed by Cone-beam Computed Tomography in a Korean Population: Variations in the Number of Roots and Canals

Introduction

The aim of this study was to determine the root and canal morphology of the mandibular first molars in a Korean population of Mongolian origin by retrospective analysis of a large number of cone-beam computed tomography (CBCT) images.

Methods

A total of 976 subjects with bilateral mandibular first molars were examined by using in vivo CBCT methods. The number and configuration of roots, the number of root canals, and the canal configuration based on Vertucci's classification were determined.

Results

Overall, 25.82% of examined molars had 3 roots, 73.51% had 2 roots, and 0.67% had 1 root. The incidence of fourth canal was 50.36%. A right-sided predominance was noted for extra distal roots (P < .001), whereas a left-sided predominance was observed for extra distal canals (P < .001). No significant sex-related differences were shown for their prevalence. The bilateral prevalence rate was 69.13% for extra distal roots and 78.08% for extra distolingual (DL) canals. In the mesial roots, type IV canal was the most frequent (76.86% for 2-rooted molars and 72.96% for 3-rooted molars). In the distal roots, type l was the most common (66.62% for 2-rooted molars and 99.40%–100% for 3-rooted molars). The incidence of 2 canals in distobuccal roots, first reported in this study, was 0.15%.

Conclusions

Among mandibular first molars, there is a high prevalence of a separate DL root and/or a separate DL canal, and such molars commonly have 4 canals in the Korean population. CBCT is a useful tool for determining root and canal morphology.     

Symmetry of Root and Root Canal Morphology of Maxillary and Mandibular Molars in a White Population: A Cone-beam Computed Tomography Study In Vivo

Introduction

The aim of the present study was to use cone-beam computed tomography (CBCT) to analyze root canal anatomy and symmetry of maxillary and mandibular first and second molar teeth of a white population.

Methods

A total of 201 patients who required CBCT examinations as part of their dental diagnosis and treatment were enrolled in the present study. Overall, 596 healthy, untreated, well-developed maxillary and mandibular molar teeth (161 maxillary first molars, 157 maxillary second molars, 117 mandibular first molars, and 161 mandibular second molars) were examined by CBCT to establish the symmetry in root and canal anatomy between right and left sides in the same patient by evaluating the number of roots and root canals and the root canal configuration.

Results

Three separate roots with 3 separate canals was the normal anatomy of maxillary first and second molars. Most mandibular first and second molars had 2 separate roots, and the majority had 3 canals. In the present study, first molars, both maxillary and mandibular, exhibited greater asymmetry than the second molars. Maxillary first molars were found to be symmetrical in 71.1% of patients, whereas maxillary second molars were symmetrical in 79.6%. The remaining 28.9% and 20.4% of patients, respectively, showed asymmetry. Around 30% of the mandibular first molars and 20% of the mandibular second molars showed asymmetry.

Conclusions

The results of the present study reported a percentage of symmetry that varied from 70%–81%. These variations in symmetry should be taken in high consideration when treating 2 opposite molars in the same patient, because their anatomy may be different in up to 30% of the cases.     

Worldwide Analyses of Maxillary First Molar Second Mesiobuccal Prevalence: A Multicenter Cone-beam Computed Tomographic Study

Introduction

Maxillary first molar second mesiobuccal (MB2) root canal prevalence may change among different populations. The aim of this study was to analyze the worldwide prevalence of the MB2 root canal and understand its possible relation with sex, age, side, and root configuration using in vivo cone-beam computed tomographic (CBCT) assessment.

Correlation of Root Dentin Thickness and Length of Roots in Mesial Roots of Mandibular Molars

Introduction

The purpose of this study was to analyze the relation of tooth length and distal wall thickness of mesial roots in mandibular molars at different locations (ie, 2 mm below the furcation and at the junction between the middle and apical third).

Methods

Forty-five mandibular first molars were taken, and the length of each tooth was measured. Then, specimens were divided into three groups according to their length: group I–long (24.2 mm ± 1.8), group II–medium (21 mm ± 1.5) and group III–short (16.8 mm ± 1.8). mesial root of each marked at two levels - at 2 mm below the furcation as well as at junction of apical and middle third of roots. The minimum thickness of the distal root dentine associated with the buccal and lingual canals of the mesial roots was measured, The distance between the buccal and lingual canals and the depth of concavity in the distal surface of the mesial roots were also measured.

Results

Statistical analysis was performed by using analysis of variance and the Student-Newman-Keuls test. The minimum thickness of the distal wall of the mesiobuccal canal was significantly different (P < .001) between groups 1 (long) and 3 (short).

Conclusions

Distal wall thickness of the mesiobuccal root and distal concavity of the mesial root of mandibular first molars were found to be thinner in longer teeth compared with shorter teeth.     

Detection of a Second Mesiobuccal Canal in Maxillary Molars by Swept-source Optical Coherence Tomography

Introduction

The purpose of this study was to investigate the ability of swept-source optical coherence tomographic (SS-OCT) imaging to detect a second mesiobuccal canal (MB2) in maxillary molars compared with visual inspection (VI) and dental operating microscopy (DOM).

Methods

Forty extracted human maxillary molars were examined. After the removal of half the crown and access cavity preparation, the existence of MB2 canals was confirmed based on cross-sectional images of each tooth obtained by micro–computed tomographic scanning as the reference standard. Then, the pulp chamber floor was scanned by SS-OCT imaging. Three dentists independently evaluated the SS-OCT images and the pulp chamber floor under VI and DOM for the presence of MB2 canals. The detection rate of MB2 canals for SS-OCT imaging, VI, and DOM was calculated, and statistical analysis was performed.

Results

MB2 canals existed in 19 of 40 teeth (47.5%) using micro-CT imaging. Sensitivity of DOM (0.947) was significantly higher than that of SS-OCT imaging (0.632). Specificity of SS-OCT imaging (0.714) was significantly higher than that of DOM (0.333). No statistically significant differences were found for accuracy among the 3 methods. Kappa values of SS-OCT, VI, and DOM were 0.526, 0.417, and 0.326, respectively.

Conclusions

SS-OCT imaging is noninvasive, involves no ionizing radiation, and is accurate for the detection of MB2 canals.     

Clinically Relevant Dimensions of 3-rooted Maxillary Premolars Obtained Via High-resolution Computed Tomography

Introduction

This study aimed to characterize the dimensions of a selection of 3-rooted maxillary premolars through high-resolution computed tomographic analysis considering measures of clinical interest for root canal treatment, such as root wall thickness, canal diameters, and distances between 2 canals in fused roots and between the root apex and foramen.

Methods

Fifteen 3-rooted human maxillary premolars extracted for therapeutic reasons were individually scanned using a high-resolution desktop high-resolution computed tomographic system. Starting from the apical foramen, the selected cross-sectional images corresponding to each millimeter of the roots were evaluated. Measures of clinical interest were determined using Image J software (version 1.41; National Institutes of Health, Bethesda, MD).

Results

Root wall thickness as thin as 0.4 and 0.6 mm was detected in the apical portion of buccal and palatal roots, respectively. In the cervical portion, buccal roots had narrower root walls (0.817–1.670 mm) compared with palatal roots (1.361–2.720 mm). In all thirds, the palatal canal was wider compared with the mesiobuccal and distobuccal canals. In the buccopalatal direction, all roots had thicker root walls toward the furcation, whereas in the mesiodistal direction the mesiobuccal and distobuccal roots had the thinnest walls along their distal and mesial aspects, respectively. Both buccal canals revealed dentin apposition 2 mm from the canal orifice, resulting in cervical constriction. Generally, the distance between the root apex and the foramen was greater in distobuccal roots in comparison with the others with a tendency for foramina to be eccentric.

Conclusions

Three-rooted premolars are a clinical challenge not just because of their low frequency and difficulties regarding diagnosis and root canals access but also because of their fragile roots. These phenomena are critical in terms of the amount of dentin removed during the preparation of root canals and during post space preparation.     

Concurrent relationship between additional canals of mandibular first molars and maxillary first molars using cone-beam computed tomography

Objective

To investigate the bilateral concurrence and relationships between distolingual (DL) roots and DL canals of the mandibular first molars and second mesiobuccal (MB2) canals of the maxillary first molars using cone-beam computed tomography (CBCT).

Methods

A total of 150 CBCT images showing all mandibular and maxillary first molars were retrospectively investigated in a South Korean subpopulation. The patient age, sex, positions of first molars, and presence of roots and canals were assessed. The frequency, bilateral concurrence of DL roots, DL canals, and MB2 canals, and concurrent relationship of DL roots or DL canals with MB2 canals were investigated. Data were analyzed using Fisher’s exact test and odds ratios from binary logistic regression.

Results

The prevalences of DL roots, DL canals, and MB2 canals were 24.7, 42.7, and 56.0 %, respectively, and showed significant bilateral concurrence. A concurrent relationship between DL roots and MB2 canals was not demonstrated, whereas the presence of a DL canal was significantly correlated with the presence of an MB2 canal on the same side.

Conclusions

The presence of a DL root of the mandibular first molar, a strong ethnic characteristic, could not predict the presence of an MB2 canal of the maxillary first molar. The correlation between DL canals and MB2 canals on the same side and the significant bilateral concurrence, whether present or absent, of DL roots, DL canals, and MB2 canals can aid clinicians in the prediction of additional canals in the first molars.     

A study of the distobuccal root canal orifice of the maxillary second molars in Chinese individuals evaluated by cone-beam computed tomography

As is commonly understood, the root canal morphology of the maxillary molars is usually complex and variable. It is sometimes difficult to detect the distobuccal root canal orifice of a maxillary second molar with root canal treatment. No literature related to the distobuccal root canals of the maxillary second molars has been published.

Objective

To investigate the position of the distobuccal root canal orifice of the maxillary second molars in a Chinese population using cone-beam computed tomography (CBCT).

Material and methods

In total, 816 maxillary second molars from 408 patients were selected from a Chinese population and scanned using CBCT. The following information was recorded: (1) the number of root canals per tooth, (2) the distance between the mesiobuccal and distobuccal root canal orifice (DM), (3) the distance between the palatal and distobuccal root canal orifice (DP), (4) the angle formed by the mesiobuccal, distobuccal and palatal root canal orifices (∠ PDM). DM, DP and ∠ PDM of the teeth with three or four root canals were analyzed and evaluated.

Results

In total, 763 (93.51%) of 816 maxillary second molars had three or four root canals. The distance between the mesiobuccal and distobuccal orifice was 0.7 to 4.8 mm. 621 (81.39%) of 763 teeth were distributed within 1.5-3.0 mm. The distance between the palatal and distobuccal orifice ranged from 0.8 mm to 6.7 mm; 585 (76.67%) and were distributed within 3.0-5.0 mm. The angle (∠ PDM) ranged from 69. 4º to 174.7º in 708 samples (92.80%), the angle ranged from 90º to 140º.

Conclusions

The position of the distobuccal root canal orifice of the maxillary second molars with 3 or 4 root canals in a Chinese population was complex and variable. Clinicians should have a thorough knowledge of the anatomy of the maxillary second molars.