Physicochemical characterization of solid dispersions of three antiepileptic drugs prepared by solvent evaporation method

We have investigated the solid dispersion and dissolution profiles of three antiepileptic drugs (carbamazepine (CBZ), oxcarbazepine (OXC) and rufinamide (RFN)) with different aqueous solubilities, prepared by the solvent evaporation method. Solid dispersions of the three drugs in hydroxy-propylmethylcellulose (HPMC), with drug:polymer ratios of 1:4, were prepared and characterized by differential scanning calorimetry (DSC), Fourier transformation infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy. The release mechanism was also investigated and the kinetic order of the solid dispersions was evaluated. It appeared that the dissolution behaviour depended on the physicochemical properties of the drug and drug-polymer interactions. DSC thermographs showed amorphous forms for all drugs confirmed by XRD patterns. The FTIR spectra of CBZ and OXC demonstrated drug interactions with HPMC through hydrogen polymer bonds. Thus, solid dispersions of these drugs had an improved dissolution profile. In contrast, solid dispersions of RUF showed modest enhancement of dissolution, suggesting negligible drug-polymer interactions. The different dissolution behaviour is attributed to the extent of interactions between the polymer hydroxyl group and the drug amide groups.     

Effect of polymer type on the dissolution profile of amorphous solid dispersions containing felodipine

Amorphous solid dispersions are used as a strategy to improve the bioavailability of poorly water-soluble compounds. When formulating with a polymer, it is important not only for the polymer to stabilize against crystallization in the solid state, but also to improve the dissolution profile through inhibiting crystallization from the supersaturated solution generated by dissolution of the amorphous material. In this study, the dissolution profiles of solid dispersions of felodipine formulated with poly(vinylpyrrolidone) (PVP), hydroxypropyl methylcellulose (HPMC) or hydroxypropyl methylcellulose acetate succinate (HPMCAS) were compared. In addition, concentration versus time profiles were evaluated for the supersaturated solutions of felodipine in the presence and absence of the polymers. HPMCAS was found to maintain the highest level of supersaturation for the greatest length of time for both the dissolution and solution crystallization experiments, whereas PVP was found to be the least effective crystallization inhibitor. All polymers appeared to reduce the crystal growth rates of felodipine at an equivalent supersaturation and this mechanism most likely contributes to the enhanced solution concentration values observed during dissolution of the amorphous solid dispersions.     

Physicochemical properties of tadalafil solid dispersions – Impact of polymer on the apparent solubility and dissolution rate of tadalafil

To improve solubility of tadalafil (Td), a poorly soluble drug substance (3 μg/ml) belonging to the II class of the Biopharmaceutical Classification System, its six different solid dispersions (1:1, w/w) in the following polymers: HPMC, MC, PVP, PVP-VA, Kollicoat IR and Soluplus were successfully produced by freeze-drying. Scanning electron microscopy showed a morphological structure of solid dispersions typical of lyophilisates. Apparent solubility and intrinsic dissolution rate studies revealed the greatest, a 16-fold, increase in drug solubility (50 μg/ml) and a significant, 20-fold, dissolution rate enhancement for the Td/PVP-VA solid dispersion in comparison with crystalline Td. However, the longest duration of the supersaturation state in water (27 μg/ml) over 24 h was observed for the Td solid dispersion in HPMC. The improved dissolution of Td from Td/PVP-VA was confirmed in the standard dissolution test of capsules filled with solid dispersions. Powder X-ray diffraction and thermal analysis showed the amorphous nature of these binary systems and indicated the existence of dispersion at the molecular level and its supersaturated character, respectively. Nevertheless, as evidenced by film casting, the greatest ability to dissolve Td in polymer was determined for PVP-VA. The crystallization tendency of Td dispersed in Kollicoat IR could be explained by the low T_g (113 °C) of the solid dispersion and the highest difference in Hansen solubility parameters (6.8 MPa^0.5) between Td and the polymer, although this relationship was not satisfied for the partially crystalline dispersion in PVP. Similarly, no correlation was found between the strength of hydrogen bonds investigated using infrared spectroscopy and the physical stability of solid dispersions or the level of supersaturation in aqueous solution.     

Preparation and characterization of dipyridamole solid dispersions for stabilization of supersaturation: effect of precipitation inhibitors type and molecular weight

Dipyridamole (DPL) is a weakly basic BCS class II drug which precipitates upon entering into intestine leading to pH dependant and variable absorption. Thus, research envisaged focuses on developing formulations that maintain supersaturation following upon acid to neutral pH transition. In an endeavor to accomplish the objective, solid dispersion (SD) with hydroxypropylmethyl cellulose (HPMC) and polyvinylpyrrolidone (PVP) was prepared by a quench cooling method. The three molecular weight grades of HPMC (HPMC E5, HPMC E15 and HPMC E50) and two molecular weight grades of PVP (PVP K30 and PVP K90) were investigated to observe effect of increasing molecular weight on stabilizing DPL supersaturated solutions. Equilibrium solubility studies revealed increase in solubility with both HPMC and PVP with greater benefit from HPMC. In vitro supersaturated dissolution results demonstrated that HPMC formulations provided greater degree and extent of supersaturation as compared to PVP formulations. The formulation with HPMC E50 provided maximum stabilization to supersaturation upon acid to neutral pH transition. Moreover, the effect of increase in molecular weight was more pronounced in HPMC rather than PVP. Stronger interactions were observed for DPL with HPMC, while no interaction was observed with PVP which was evident from Fourier transform infra-red studies. Differential scanning calorimetry and powder X-ray diffraction studies revealed the amorphous state of DPL in SD.     

An investigation into the dissolution properties of celecoxib melt extrudates: understanding the role of polymer type and concentration in stabilizing supersaturated drug concentrations

In this study, the dissolution properties of celecoxib (CX) solid dispersions manufactured from Eudragit 4155F and polyvinylpyrrolidone (PVP) were evaluated. Hot-melt extrusion (HME) technology was used to prepare amorphous solid dispersions of drug/polymer binary systems at different mass ratios. The drug concentrations achieved from the dissolution of PVP and Eudragit 4155F solid dispersions in phosphate buffer, pH 7.4 (PBS 7.4) were significantly greater than the equilibrium solubility of CX (1.58 μg/mL). The degree of supersaturation increased significantly as the polymer concentration within the solid dispersion increased. The maximum drug concentration achieved by PVP solid dispersions did not significantly exceed the apparent solubility of amorphous CX. The predominant mechanism for achieving supersaturated CX concentrations in PBS 7.4 was attributed to stabilization of amorphous CX during dissolution. Conversely, Eudragit 4155F solid dispersions showed significantly greater supersaturated drug solutions particularly at high polymer concentrations. For example, at a drug/polymer ratio of 1:9, a concentration of 100 μg/mL was achieved after 60 min that was stable (no evidence of drug recrystallization) for up to 72 h. This clearly identifies the potential of Eudragit 4155F to act as a solubilizing agent for CX. These findings were in good agreement with the results from solubility performed using PBS 7.4 in which Eudragit 4155F had been predissolved. In these tests, Eudragit 4155F significantly increased the equilibrium solubility of CX. Solution (1)H NMR spectra were used to identify drug/polymer interactions. Deshielding of CX aromatic protons (H-1a and H-1b) containing the sulfonamide group occurred as a result of dissolution of Eudragit 4155F solid dispersions, whereas deshielding of H-1a protons and shielding of H-1b protons occurred as a result of the dissolution of PVP solid dispersions. In principle, it is reasonable to suggest that the different drug/polymer interactions observed give rise to the variation in dissolution observed for the two polymer/drug systems.     

Enhanced kinetic solubility profiles of indomethacin amorphous solid dispersions in poly(2-hydroxyethyl methacrylate) hydrogels

The feasibility of forming solid molecular dispersions of poorly water-soluble drugs in crosslinked poly(2-hydroethyl methacrylate) (PHEMA) hydrogel has recently been reported by our group. The purpose of the present study is to investigate the extent of enhancement of kinetic solubility of amorphous solid dispersions (ASDs) of indomethacin (IND) in crosslinked PHEMA hydrogels as compared with those based on conventional water-soluble polymer carriers. Our results show that under non-sink conditions, the initial solubility enhancement is higher for ASDs based on polyvinylpyrrolidone (PVP) and hydroxypropylmethylcellulose acetate succinate (HMPCAS), but the ability to maintain this solubility enhancement at longer times is better for ASDs based on PHEMA over a period of 24h with the extent of solubility enhancement of IND ASDs in PHEMA falling between those in PVP and HPMCAS at 10.0% IND loading after 6h and outperforming those in PVP and HPMCAS at 32.9% IND loading after 8h. The observed kinetic solubility profiles reflect the fact that the amorphous IND is released from PHEMA by a different mechanism than those from water-soluble polymer carriers. In this case, the dissolution of IND ASD from water-soluble PVP and HPMCAS is almost instantaneous, resulting in an initial surge of IND concentration followed by a sharp decline due to the nucleation and crystallization events triggered by the rapid build-up of drug supersaturation. On the other hand, the dissolution of IND ASD from insoluble crosslinked PHEMA hydrogel beads is less rapid as it is regulated by a feedback-controlled diffusion mechanism, thus avoiding a sudden surge of supersaturation in the dissolution medium. The absence of an apparent decline in drug concentration during dissolution from IND-PHEMA ASD further reflects the diminished nucleation and crystallization events during IND dissolution from hydrogel-based solid molecular dispersions. Based on the XRD analyses, a threshold IND loading level of about 34% in PHEMA has been identified, above which amorphous to crystalline transition tends to occur. Also, by selecting the appropriate particle sizes, immediate to controlled release of IND from IND-PHEMA ASD can be readily achieved as the release rate increases with decreasing PHEMA bead size. Furthermore, a robust physical stability has been demonstrated in IND-PHEMA ASD with no drug precipitation for up to 8 months at IND loadings below 16.7% under direct open cup exposure to accelerated stability conditions (40°C/75% RH).     

Molecular and thermodynamic aspects of solubility advantage from solid dispersions

The solubility behavior of solid dispersions of two drugs with similar structures was studied. Valdecoxib (VLB) and etoricoxib (ETB) were used as model drugs, and their solid dispersions were prepared with 1, 2, 5, 10, 15, and 20% w/w poly(vinylpyrrolidone) (PVP) by the quench cooling method. The interactions between the drug and polymer molecules were studied by Fourier transform infrared spectroscopy (FT-IR). The thermodynamic aspects of solubility behavior were studied by plotting van't Hoff plots. Both the drugs showed significant differences in their solubility behavior. In the case of VLB, solubility was found to increase significantly with increasing PVP concentration. ETB however did not show any significant solubility enhancement and was found to have decreased solubility at high PVP concentrations. H-bonding interactions were established between VLB and PVP molecules, while none were observed in ETB-PVP dispersions. Solution thermodynamics of amorphous and crystalline forms of both the drugs were studied by van't Hoff plots. The results obtained showed very high negative value of Gibbs free energy for VLB as compared to ETB, thus demonstrating high spontaneity of VLB solubilization. Entropy of amorphous VLB was found to be highly favorable, while being slightly unfavorable for ETB. From this study H-bonding interactions were found to play a major role in dictating the solubility behavior of these drugs from solid dispersions.     

Nanoparticle formation and growth during in vitro dissolution of ketoconazole solid dispersion

The aim of this study is to examine the physical mechanisms during the dissolution of a solid dispersion, so as to provide further understanding behind the enhanced dissolution properties. X-ray amorphous solid dispersions of ketoconazole (KC), a poorly aqueous soluble drug, were prepared by melt extrusion with polyvinlypyrrolidone 17 (PVP 17) and PVP-vinyl acetate (PVP-VA64) copolymer. Prior to dissolution, Raman mapping showed a fully homogeneous spatial distribution of KC in polymer and possible drug dispersion at molecular level, whereas Fourier transform infrared spectroscopy revealed no drug-polymer chemical interaction. During in vitro dissolution test, a burst release followed by a gradual decline in dissolution could be explained by the release of KC in molecular form followed by formation of drug nanoparticles and their subsequent growth to micron size range as shown by dynamic light scattering analysis. Observations using transmission electron microscopy and cryogenic scanning electron microscopy provided support to the suggested mechanisms. The results suggested that the release of KC from the solid dispersions was carrier controlled initially, and PVP 17 PF is more efficient in inhibiting particle growth as compared with PVP-VA64. The particle growth inhibition during dissolution may be an important consideration to achieve the full benefits of dissolution enhancement of solid dispersions.     

Moisture-Induced Amorphous Phase Separation of Amorphous Solid Dispersions: Molecular Mechanism,Microstructure, and Its Impact on Dissolution Performance

Amorphous phase separation (APS) is commonly observed in amorphous solid dispersions (ASD) when exposed to moisture. The objective of this study was to investigate: (1) the phase behavior of amorphous solid dispersions composed of a poorly water-soluble drug with extremely low crystallization propensity, BMS-817399, and PVP, following exposure to different relative humidity (RH), and (2) the impact of phase separation on the intrinsic dissolution rate of amorphous solid dispersion. Drug-polymer interaction was confirmed in ASDs at different drug loading using infrared (IR) spectroscopy and water vapor sorption analysis. It was found that the drug-polymer interaction could persist at low RH (≤75% RH) but was disrupted after exposure to high RH, with the advent of phase separation. Surface morphology and composition of 40/60 ASD at micro-/nano-scale before and after exposure to 95% RH were also compared. It was found that hydrophobic drug enriched on the surface of ASD after APS. However, for the 40/60 ASD system, the intrinsic dissolution rate of amorphous drug was hardly affected by the phase behavior of ASD, which may be partially attributed to the low crystallization tendency of amorphous BMS-817399 and enriched drug amount on the surface of ASD. Intrinsic dissolution rate of PVP decreased resulting from APS, leading to a lower concentration in the dissolution medium, but supersaturation maintenance was not anticipated to be altered after phase separation due to the limited ability of PVP to inhibit drug precipitation and prolong the supersaturation of drug in solution. This study indicated that for compounds with low crystallization propensity and high hydrophobicity, the risk of moisture-induced APS is high but such phase separation may not have profound impact on the drug dissolution performance of ASDs. Therefore, application of ASD technology on slow crystallizers could incur low risks not only in physical stability but also in dissolution performance.     

Dissolution Performance of High Drug Loading Celecoxib Amorphous Solid Dispersions Formulated with Polymer Combinations

Purpose

The aims of this study were twofold. First, to evaluate the effectiveness of selected polymers in inhibiting solution crystallization of celecoxib. Second, to compare the release rate and crystallization tendency of celecoxib amorphous solid dispersions (ASDs) formulated with a single polymer, or binary polymer combinations.

Methods

The effectiveness of polymers, polyvinylpyrrolidone (PVP), hydroxypropylmethyl cellulose (HPMC) or HPMC acetate succinate (HPMCAS), in maintaining supersaturation of celecoxib solutions was evaluated by performing nucleation induction time measurements. Crystallization kinetics of ASD suspensions were monitored using Raman spectroscopy. Dissolution experiments were carried out under non-sink conditions.

Results

Pure amorphous celecoxib crystallized rapidly through both matrix and solution pathways. Matrix and solution crystallization was inhibited when celecoxib was molecularly mixed with a polymer, resulting in release of the drug to form supersaturated solutions. Cellulosic polymers were more effective than PVP in maintaining supersaturation. Combining a cellulosic polymer and PVP enabled improved drug release and stability to crystallization.

Conclusions

Inclusion of an effective solution crystallization inhibitor as a minor component in ternary dispersions resulted in prolonged supersaturation following dissolution. This study shows the feasibility of formulation strategies for ASDs where a major polymer component is used to achieve one key property e.g. release, while a minor polymer component is added to prevent crystallization.

     

Poly(2-Ethyl-2-Oxazoline) as an Alternative to Poly(Vinylpyrrolidone) in Solid Dispersions for Solubility and Dissolution Rate Enhancement of Drugs

Poly(2-ethyl-2-oxazoline) (PEOX), a biocompatible polymer considered as pseudopolypeptide, was introduced as a potential alternative to the commonly used polymer, poly(vinylpyrrolidone) (PVP) for the preparation of solid dispersion with a poorly soluble drug. Glipizide (GPZ), a Biopharmaceutical Classification System class II model drug, was selected for solubility and dissolution rate study. GPZ-polymer solid dispersions and physical mixtures were characterized and investigated by X-ray diffractometry, differential scanning calorimetry, scanning electron microscopy, and FTIR spectroscopy. The impact of polymers on crystal nucleation kinetics was studied, and PEOX exhibited strong inhibitory effect compared with PVP. Solubility and dissolution behavior of the prepared solid dispersions and their physical blends were in vitro examined and evaluated. A significant enhancement in GPZ solubility was obtained with PEOX compared with the pure drug and solid dispersion with PVP. A big improvement in the intrinsic dissolution rate (45 times) and dissolved amount of GPZ (58 times) was achieved with PEOX in fasted state simulated intestinal fluid, against comparable enhancement observed with PEOX and PVP in phosphate buffer at pH 6.8. Lower molecular weight of PEOX-5K (5000 g/mol) was found to be superior to higher molecular weight PEOX-50K (50,000 g/mol) in the improvement of dissolution behavior. The findings of this study with GPZ as a model drug introduce lower molecular weight PEOX as a promising polymeric carrier toward better oral bioavailability of poorly soluble drugs.     

Physicochemical characterization and in vitro dissolution studies of solid dispersions of ketoprofen with PVP K30 and d-mannitol

Aim of the present study was to improve the solubility and dissolution rate of poorly water soluble, BCS class-II drug Ketoprofen (KETO) by solid-dispersion approach. Solid dispersions were prepared by using polyvinylpyrrolidone K30 (PVP K30) and d-mannitol in different drugs to carrier ratios. Dispersions with PVP K30 were prepared by kneading and solvent evaporation techniques, whereas solid dispersions containing d-mannitol were prepared by kneading and melting techniques. These formulations were characterized in the liquid state by phase-solubility studies and in the solid state by Differential Scanning Calorimetry (DSC), Fourier Transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). The aqueous solubility of KETO was favored by the presence of both carriers. The negative values of Gibbs free energy illustrate the spontaneous transfer from pure water to the aqueous polymer environment. Solid state characterization indicated KETO was present as fine particles in d-mannitol solid dispersions and entrapped in carrier matrix of PVP K30 solid dispersions. In contrast to the very slow dissolution rate of pure KETO, dispersions of drug in carriers considerably improved the dissolution rate. This can be attributed to increased wettability and dispersibility, as well as decreased crystallinity and increase in amorphous fraction of drug. Solid dispersions prepared with PVP K30 showed the highest improvement in dissolution rate of KETO. Even physical mixtures of KETO prepared with both carriers also showed better dissolution profiles than those of pure KETO.     

Correlating the Behavior of Polymers in Solution as Precipitation Inhibitor to its Amorphous Stabilization Ability in Solid Dispersions

Our major goals were to understand the mechanism of dipyridamole (DPD) precipitation inhibition in the presence of polymers and to correlate the polymers-mediated precipitation inhibition in solution to the amorphous stabilization in the solid state. A continuous UV spectrophotometer was used to monitor the DPD concentration with time in the absence and presence of different polymers. Six polymers: PVP K90, hydroxypropylmethylcellulose (HPMC), Eudragit E100, Eudragit S100, Eudragit L100, and PEG 8000 were screened at different drug-to-monomer ratios. Solid dispersions were characterized by X-ray powder diffraction and modulated differential scanning calorimetry, whereas infrared (IR) and Raman were used to investigate the possible drug-polymer interactions. Eudragit E100 and HPMC were found to delay both DPD precipitation initiation time and precipitation rates. Eudragit S100 delayed only the precipitation initiation time and PVP K90 decreased only the precipitation rates. In solid state, Eudragit S100, PVP K90, HPMC, and Eudragit L100 were effective stabilizers of the DPD solid dispersion. Eudragit S100 was found to be most effective DPD-stabilizing polymer. The IR and Raman spectra of the solid dispersion of Eudragit S100 and HPMC showed peak shift, indicating drug-polymer molecular interactions. It is concluded that the drug-polymer interaction plays a significant role in precipitation inhibition and amorphous stabilization.     

Preparation and characterization of emulsified solid dispersions containing docetaxel

An emulsified solid dispersion of docetaxel was prepared and characterized in vitro. In contrast to conventional solid dispersions, emulsifying pharmaceutical excipients and hydroxypropyl methylcellulose (HPMC) as a supersaturation promoter were introduced into the PEG6000-based solid dispersion to further improve its solubilizing capability. The solubility, dissolution in vitro and stability of the prepared emulsified solid dispersions were studied taking into consideration of the effects of different emulsifying excipients, preparation methods and the media. Results of the emulsified solid dispersion of docetaxel showed that the solubility and dissolution at 2 h were 34.2- and 12.7-fold higher than the crude powder. The type of emulsifying excipient used had a significant influence on the dissolution of the emulsified solid dispersion. The dissolution of the emulsified solid dispersion prepared by the solvent-melting method or the solvent method was higher than the melting method. There were no apparent differences among the dissolution media utilized. The status of the drug in the emulsified solid dispersion was observed in an amorphous or a molecular dispersion state by differential thermal analysis and powder Xray diffraction. In conclusion, the incorporation of emulsifying pharmaceutical excipients and HPMC with polymers into a solid dispersion could be a new and useful tool to greatly increase the solubility and dissolution of poorly water-soluble drugs.     

Investigation of the release mechanism of a sparingly water-soluble drug from solid dispersions in hydrophilic carriers based on physical state of drug, particle size distribution and drug-polymer interactions.

In the present study the release mechanism of the sparingly water-soluble drug felodipine (FELO) from particulate solid dispersions in PVP or PEG was investigated. FT-IR data indicated that a N-H...O hydrogen bond is formed between FELO and polymers. The drug-polymer interaction was theoretically studied with the density functional theory with the B3LYP exchange correlation function. The interaction energies have been estimated at -31.8 kJ/mol for PVP and -18.8 kJ/mol for PEG. Also, detailed vibrational analysis of the complexes showed that the red shift of the N-H bond stretching in FELO molecule due to H-bonding was higher in the FELO-PVP complex than in the FELO-PEG complex. Both the experimental and theoretical data indicated that a stronger interaction of FELO with PVP than with PEG was developed. The interactions of FELO with the polymer appeared to control the physical state (amorphous or crystalline) and the particle size of FELO in the solid dispersions. In the FELO/PVP dispersions, the drug is found as amorphous nanoparticles whereas in FELO/PEG dispersions the drug is dispersed as crystalline microparticles. The size of drug particles in the dispersion was also influenced by drug proportion, with an increase in drug content of the dispersion resulting in increased drug particle size. The particle size of drug, the proportion of drug in the dispersion and the properties of the polymer (molecular weight) appeared to determine the mechanism of drug release from the solid dispersions, which was drug diffusion (through the polymer layer)-controlled at low drug contents and drug dissolution-controlled at high drug contents. In situ DLS measurements indicate that the large initial particles of FELO/PVP and FELO/PEG solid dispersions with low drug content (10-20 wt%) are very rapidly decreased to smaller particles (including nanoparticles) during dissolution, leading to the observed impressive enhancement of FELO release rate from these dispersions.     

Influence of different polymers on the crystallization tendency of molecularly dispersed amorphous felodipine

The ability of various polymers to inhibit the crystallization of amorphous felodipine was studied in amorphous molecular dispersions. Spin-coated films of felodipine with poly(vinylpyrrolidone) (PVP), hydroxypropylmethylcellulose acetate succinate (HPMCAS), and hydroxypropylmethylcellulose (HPMC) were prepared and used for measurement of the nucleation rate and to probe drug-polymer intermolecular interactions. Bulk solid dispersions were prepared by a solvent evaporation method and characterized using thermal analysis. It was found that each polymer was able to significantly decrease the nucleation rate of amorphous felodipine even at low concentrations (3-25% w/w). Each polymer was found to affect the nucleation rate to a similar extent at an equivalent weight fraction. For HPMC and HPMCAS, thermal analysis indicated that the glass transition temperature (T(g)) of the solid dispersions were not significantly different from that of felodipine alone, whereas an increase in T(g) was observed for the PVP containing solid dispersions. Infrared spectroscopic studies indicated that hydrogen bonding interactions were formed between felodipine and each of the polymers. These interactions were stronger between felodipine and PVP than for the other polymers. It was speculated that, at the concentrations employed, the polymers reduce the nucleation rate through increasing the kinetic barrier to nucleation.     

阿瑞匹坦三元超饱和固体分散体的制备及性能考察

目的：为了提高难溶性药物阿瑞匹坦(Aprepitant,APR)的溶解度,解决其酸中溶出、碱中结晶沉淀的问题,选择不同功能的聚合物载体,采用热熔挤出技术制备三元固体分散体,并对其进行性能考察;方法：采用溶剂-熔融法制备二元固体分散体,以溶出度和溶出速度为指标,筛选具有增溶功能的载体材料。通过介质转移法考察各聚合物在不同浓度的药物溶液中的抑晶性能,筛选出最佳的沉淀抑制剂。确定药载比,将APR、溶出促进剂及沉淀抑制剂以不同比例混合,采用热熔挤出技术制备三元固体分散体,以溶出度和抑晶时间为指标,优选出三元固体分散体处方。经XRD确认药物在载体中的存在状态,考察该三元固体分散体在模拟肠液中的动态溶解度和加速条件下的物理稳定性。结果：亲水性聚合物PVP K30制备的二元固体分散体溶出速度快,增溶效果佳,肠溶性聚合物HPMCAS显示出优越的抑晶作用,延长了APR的过饱和点,质量比为1:1:3(APR:PVP K30:HPMCAS)的三元固体分散体在酸中迅速完全释放(120min溶出95%),相对于原料药显著提高了溶出度和溶出速率,当介质pH转为6.8后,三元固体分散体完全释放并在6h内维持溶液处于高过饱和的稳定状态,药物以无定形形式存在于载体基质中,同时能在加速条件下保持至少三个月的无定形状态。结论：基于不同聚合物的理化特性,本研究制备的三元固体分散体通过协调溶出速率和结晶抑制效果,不仅显著提高APR的溶解度,并能解决APR在胃中溶出、肠中沉淀析晶的问题,具有良好的溶出特性。     

Preparation of a solid dispersion of felodipine using a solvent wetting method.

A straightforward solvent wetting method was used to prepare felodipine solid dispersions in the presence of various carriers. Dichloromethane is not needed when HPMC solid dispersions were produced using the solvent wetting method. The amount of ethanol used to prepare solid dispersions did not have a significant effect on the dissolution rate of felodipine. The results of X-ray diffraction and thermal analysis indicated that the drug was in the amorphous state when PVP, HPMC, and poloxamer were used as carriers. The dissolution rates of felodipine in PVP, HPMC, or poloxamer solid dispersions were much faster than those for the corresponding physical mixtures. However, dissolution profiles were found to depend on the carrier used; the dissolution rate of felodipine increased slowly for solid dispersions prepared using HPMC, whereas rapid initial dissolution rates were observed for solid dispersions prepared using PVP or poloxamer. Increases in dissolution rates were partly dependent on the ratios of felodipine to carrier. No significant changes in crystal form were observed by X-ray diffraction or thermal analysis, and no significant changes in dissolution rate were observed when sorbitol and mannitol were used as carriers.     

Physicochemical characterization and dissolution study of solid dispersions of Lovastatin with polyethylene glycol 4000 and polyvinylpyrrolidone K30

Solid dispersions in water-soluble carriers have attracted considerable interest as a means of improving the dissolution rate, and hence possibly bioavailability, of a range of hydrophobic drugs. The aim of the present study was to improve the solubility and dissolution rate of a poorly water-soluble drug, Lovastatin, by a solid dispersion technique. Solid dispersions were prepared by using polyethylene glycol 4000 (PEG 4000) and polyvinylpyrrolidone K30 (PVP K30) in different drug-to-carrier ratios. Dispersions with PEG 4000 were prepared by fusion-cooling and solvent evaporation, whereas dispersions containing PVP K30 were prepared by solvent evaporation technique. These new formulations were characterized in the liquid state by phase solubility studies and in the solid state by differential scanning calorimetry, X-ray powder diffraction, and FT-IR spectroscopy. The aqueous solubility of Lovastatin was favored by the presence of both polymers. The negative values of the Gibbs free energy and enthalpy of transfer explained the spontaneous transfer from pure water to the aqueous polymer environment. Solid-state characterization indicated Lovastatin was present as amorphous material and entrapped in polymer matrix. In contrast to the very slow dissolution rate of pure Lovastatin, the dispersion of the drug in the polymers considerably enhanced the dissolution rate. This can be attributed to improved wettability and dispersibility, as well as decrease of the crystalline and increase of the amorphous fraction of the drug. Solid dispersion prepared with PVP showed the highest improvement in wettability and dissolution rate of Lovastatin. Even physical mixture of Lovastatin prepared with both polymers also showed better dissolution profile than that of pure Lovastatin. Tablets containing solid dispersion prepared with PEG and PVP showed significant improvement in the release profile Lovastatin compared with tablets containing Lovastatin without PEG or PVP.     

Physicochemical Characterization and Dissolution Study of Solid Dispersions of Lovastatin with Polyethylene Glycol 4000 and Polyvinylpyrrolidone K30

Solid dispersions in water-soluble carriers have attracted considerable interest as a means of improving the dissolution rate, and hence possibly bioavailability, of a range of hydrophobic drugs. The aim of the present study was to improve the solubility and dissolution rate of a poorly water-soluble drug, Lovastatin, by a solid dispersion technique. Solid dispersions were prepared by using polyethylene glycol 4000 (PEG 4000) and polyvinylpyrrolidone K30 (PVP K30) in different drug-to‐carrier ratios. Dispersions with PEG 4000 were prepared by fusion-cooling and solvent evaporation, whereas dispersions containing PVP K30 were prepared by solvent evaporation technique. These new formulations were characterized in the liquid state by phase solubility studies and in the solid state by differential scanning calorimetry, X-ray powder diffraction, and FT-IR spectroscopy. The aqueous solubility of Lovastatin was favored by the presence of both polymers. The negative values of the Gibbs free energy and enthalpy of transfer explained the spontaneous transfer from pure water to the aqueous polymer environment. Solid-state characterization indicated Lovastatin was present as amorphous material and entrapped in polymer matrix. In contrast to the very slow dissolution rate of pure Lovastatin, the dispersion of the drug in the polymers considerably enhanced the dissolution rate. This can be attributed to improved wettability and dispersibility, as well as decrease of the crystalline and increase of the amorphous fraction of the drug. Solid dispersion prepared with PVP showed the highest improvement in wettability and dissolution rate of Lovastatin. Even physical mixture of Lovastatin prepared with both polymers also showed better dissolution profile than that of pure Lovastatin. Tablets containing solid dispersion prepared with PEG and PVP showed significant improvement in the release profile of Lovastatin compared with tablets containing Lovastatin without PEG or PVP.