Characterization of Poly(glycolide-co-D,L-lactide)/Poly(D,L-lactide) Microspheres for Controlled Release of GM-CSF

Purpose. This study describes the preparation and characterization of a controlled release formulation of granulocyte-macrophage colony-stimulating factor (GM-CSF) encapsulated in poly(glycolide-co-D,L-lactide) (PLGA) and poly(D,L-lactide) (PLA) microspheres. Methods. GM-CSF was encapsulated in PLGA/PLA microspheres by a novel silicone oil based phase separation process. Several different blends of PLGA and low molecular weight PLA were used to prepare the microspheres. The microspheres and the encapsulated GM-CSF were extensively characterized both in vitroand in vivo. Results. Steady release of GM-CSF was achieved over a period of about one week without significant 'burst' of protein from the microspheres. Analysis of microsphere degradation kinetics by gel permeation chromatography (GPC) indicated that low molecular weight PLA enhanced the degradation of the PLGA and thereby affected release kinetics. GM-CSF released from the microspheres was found to be biologically active and physically intact by bioassay and chromato-graphic analysis. Analysis of serum from mice receiving huGM-CSF indicated that the GM-CSF was biologically active and that a concentration of greater than 10 ng/mL was maintained for a period lasting at least nine days. MuGM-CSF was not detected followingin vivo administration of muGM-CSF microspheres. The tissues of mice receiving muGM-CSF microspheres were characterized by infiltration of neutrophils, and macrophages which were in significant excess of those found in mice administered with placebo controls (i.e. microspheres without GM-CSF). Conclusions. This study demonstrates the influence of formulation parameters on the encapsulation of GM-CSF in PLGA/PLA microspheres and its controlled release in biologically active form. The intense local tissue reaction in mice to muGM-CSF microspheres demonstrates the importance of the mode of delivery on the pharmacologic activity of GM-CSF.     

A Heterogeneously Structured Composite Based on Poly(lactic-co-glycolic acid) Microspheres and Poly(vinyl alcohol) Hydrogel Nanoparticles for Long-Term Protein Drug Delivery

Purpose. To prepare a heterogeneously structured composite based on poly (lactic-co-glycolic acid) (PLGA) microspheres and poly(vinyl alcohol) (PVA) hydrogel nanoparticles for long-term protein drug delivery. Methods. A heterogeneously structured composite in the form of PLGA microspheres containing PVA nanoparticles was prepared and named as PLGA-PVA composite microspheres. A model protein drug, bovine serum albumin (BSA), was encapsulated in the PVA nanoparticles first. The BSA-containing PVA nanoparticles was then loaded in the PLGA microspheres by using a phase separation method. The protein-containing PLGA-PVA composite microspheres were characterized with regard to morphology, size and size distribution, BSA loading efficiency, in vitroBSA release, and BSA stability. Results. The protein-containing PLGA-PVA composite microspheres possessed spherical shape and nonporous surface. The PLGA-PVA composite microspheres had normal or Gaussian size distribution. The particle size ranged from 71.5 m to 282.7 m. The average diameter of the composite microspheres was 180 m. The PLGA-PVA composite microspheres could release the protein (BSA) for two months. The protein stability study showed that BSA was protected during the composite microsphere preparation and stabilized inside the PLGA-PVA composite microspheres. Conclusions. The protein-containing PLGA-PVA composite may be suitable for long-term protein drug delivery.     

Preparation and Characterization of a Composite PLGA and Poly(Acryloyl Hydroxyethyl Starch) Microsphere System for Protein Delivery

Purpose. To prepare and characterize a novel composite microsphere system based on poly(D,L-lactide-co-glycolide) (PLGA) and poly(acryloyl hydroxyethyl starch) (acHES) hydrogel for controlled protein delivery. Methods. Model proteins, bovine serum albumin, and horseradish peroxidase were encapsulated in the acHES hydrogel, and then the protein-containing acHES hydrogel particles were fabricated in the PLGA matrix by a solvent extraction or evaporation method. The protein-loaded PLGA-acHES composite microspheres were characterized for protein loading efficiency, particle size, and in vitro protein release. Protein stability was examined by size-exclusion chromatography, sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), and monitoring the enzymatic activity. Results. Scanning electron microscopy showed discrete PLGA microspheres containing many acHES particles. The composite microspheres were spherical and smooth in size range of 39-93 m. The drug loading efficiency ranged from 51 to 101%. The composite microspheres showed more favorable in vitro release than conventional PLGA microspheres. The composite microspheres showed 20% less initial with a gradual sustained release compared to high burst (60%) followed by a very slow release with the conventional PLGA microspheres. The composite microspheres also stabilized encapsulated proteins from the loss of activity during the microsphere preparation and release. Proteins extracted from the composite microspheres showed good stability without protein degradation products and structural integrity changes in the size-exclusion chromatography and SDS-PAGE analyses. Horseradish peroxidase extracted from microspheres retained more than 81% enzymatic activity. Conclusion. The PLGA-acHES composite microsphere system could be useful for the controlled delivery of protein drugs.     

Preparation and Characterization of Poly (D,L-Lactide-Co-Glycolide) Microspheres for Controlled Release of Poly(L-Lysine) Complexed Plasmid DNA

Purpose. To produce and characterize controlled release formulations of plasmid DNA (pDNA) loaded in poly (D,L-lactide-co-glycolide) (PLGA) microspheres both in free form and as a complex with poly (L-lysine). Methods. Poly (L-lysine) (PLL) was used to form pDNA/PLL complexes with complexation ratio of 1:0.125 and 1:0.333 w/w to enhance the stability of pDNA during microsphere preparation and protect pDNA from nuclease attack. pDNA structure, particle size, zeta potential, drug loading, in vitro release properties, and protection from DNase I were studied. Results. The microspheres were found to be spherical with average particle size of 3.1-3.5 m. Drug loading of 0.6% was targeted. Incorporation efficiencies of 35.1% and 29.4-30.6% were obtained for pDNA and pDNA/PLL loaded microspheres respectively. Overall, pDNA release kinetics following the initial burst did not correlate with blank microsphere polymer degradation profile suggesting that pDNA release is convective diffusion controlled. The percentage of supercoiled pDNA in the pDNA and pDNA/PLL loaded microspheres was 16.6 % and 76.7-85.6% respectively. Unencapsulated pDNA and pDNA/PLL degraded completely within 30 minutes upon the addition of DNase I. Encapsulation of DNA/PLL in PLGA microspheres protected pDNA from enzymatic degradation. Conclusions. The results show that using a novel process, pDNA can be stabilized and encapsulated in PLGA microspheres to protect pDNA from enzymatic degradation.     

5-Fluorouracil-loaded microspheres prepared by spray-drying poly(D,L-lactide) and poly(lactide-co-glycolide) polymers: Characterization and drug release

5-Fluorouracil (5-FU), a hydrosoluble anti-neoplastic drug, was encapsulated in microspheres of poly(D,L-lactide) (PLA) and poly(lactide-co-glycolide) (PLGA) polymers using the spray-drying technique, in order to obtain small size microspheres with a significant drug entrapment efficiency. Drug-loaded microspheres included between 47?±?11 and 67?±?12?µg 5-FU?mg^?1 microspheres and the percentage of entrapment efficiency was between 52?±?12 and 74?±?13. Microspheres were of small size (average diameter: 0.9?±?0.4–1.4?±?0.8?µm microspheres without drug; 1.1?±?0.5–1.7?±?0.9?µm 5-FU-loaded microspheres) and their surface was smooth and slightly porous, some hollows or deformations were observed in microspheres prepared from polymers with larger T_g. A fractionation process of the raw polymer during the formation of microspheres was observed as an increase of the average molecular weight and also of T_g of the polymer of the microspheres. The presence of 5-FU did not modify the T_g values of the microspheres. Significant interactions between the drug and each one of the polymers did not take place and total release of the included drug was observed in all cases. The time needed for the total drug release (28–129?h) was in the order PLA?>?PLGA 75/25?>?PLGA 50/50. A burst effect (17–20%) was observed during the first hour and then a period of constant release rate (3.52?±?0.82–1.46?±?0.26?µg 5-FU?h^?1 per milligram of microspheres) up to 8 or 13?h, depending on the polymer, was obtained.     

Improving Protein Delivery from Microparticles Using Blends of Poly(DL lactide co-glycolide) and Poly(ethylene oxide)-poly(propylene oxide) Copolymers

Purpose. Microparticles containing ovalbumin as a model for protein drugs were formulated from blends of poly(DL lactide-co-glycolide) and poly(ethylene oxide)-poly(propylene oxide) copolymers (Pluronic). The objectives were to achieve uniform release characteristics and improved protein delivery capacity. Methods. The water- in oil -in oil emulsion/solvent extraction technique was used for microparticle production. Results. A protein loading level of over 40% (w/w) was attained in microparticles having a mean diameter of approximately 5 µm. Linear protein release profiles over 25 days in vitro were exhibited by certain blend formulations incorporating hydrophilic Pluronic F127. The release profile tended to plateau after 10 days when the more hydrophobic Pluronic L121 copolymer was used to prepare microparticles. A delivery capacity of 3 µg OVA/mg particles/ day was achieved by formulation of microparticles using a 1:2 blend of PLG:Pluronic F127. Conclusions. The w/o/o formulation approach in combination with PLG:Pluronic blends shows potential for improving the delivery of therapeutic proteins and peptides from microparticulate systems. Novel vaccine formulations are also feasible by incorporation of Pluronic L121 in the microparticles as a co-adjuvant.     

The Stability of Recombinant Human Growth Hormone in Poly(lactic-co-glycolic acid) (PLGA) Microspheres

Purpose. The development of a sustained release formulation for recombinant human growth hormone (rhGH) as well as other proteins requires that the protein be stable at physiological conditions during its in vivo lifetime. Poly(lactic-co-glycolic acid) (PLGA) microspheres may provide an excellent sustained release formulation for proteins, if protein stability can be maintained. Methods. rhGH was encapsulated in PLGA microspheres using a double emulsion process. Protein released from the microspheres was assessed by several chromatrographic assays, circular dichroism, and a cell-based bioassay. The rates of aggregation, oxidation, diketopiperazine formation, and deamidation were then determined for rhGH released from PLGA microspheres and rhGH in solution (control) during incubation in isotonic buffer, pH 7.4 and 37°C. Results. rhGH PLGA formulations were produced with a low initial burst (<20%) and a continuous release of rhGH for 30 days. rhGH was released initially from PLGA microspheres in its native form as measured by several assays. In isotonic buffer, pH 7.4 and 37°C, the rates of rhGH oxidation, diketopiperazine formation, and deamidation in the PLGA microspheres were equivalent to the rhGH in solution, but aggregation (dimer formation) occured at a slightly faster rate for protein released from the PLGA microspheres. This difference in aggregation rate was likely due to the high protein concentration used in the encapsulation process. The rhGH released was biologically active throughout the incubation at these conditions which are equivalent to physiological ionic strength and pH. Conclusions. rhGH was successfully encapsulated and released in its fully bioactive form from PLGA microspheres over 30 days. The chemical degradation rates of rhGH were not affected by the PLGA microspheres, indicating that the internal environment of the microspheres was similar to the bulk solution. After administration, the microspheres should become fully hydrated in the subcutaneous space and should experience similar isotonic conditions and pH. Therefore, if a protein formulation provides stability in isotonic buffer, pH 7.4 and 37°C, it should allow for a safe and efficacious sustained release dosage form in PLGA microspheres.     

Surface Modification of Poly(lactide-co-glycolide) Nanospheres by Biodegradable Poly(lactide)-Poly(ethylene glycol) Copolymers

The modification of surface properties of biodegradable poly(lactide-co-glycolide) (PLGA) and model polystyrene nanospheres by poly(lactide)-poly(ethlene glycol) (PLA:PEG) copolymers has been assessed using a range of in vitro characterization methods followed by in vivo studies of the nanospheres biodistribution after intravenous injection into rats. Coating polymers with PLA:PEG ratio of 2:5 and 3:4 (PEG chains of 5000 and 2000 Da, respectively) were studied. The results reveal the formation of a PLA: PEG coating layer on the particle surface resulting in an increase in the surface hydrophilicity and decrease in the surface charge of the nanospheres. The effects of addition of electrolyte and changes in pH on stability of the nanosphere dispersions confirm that uncoated particles are electrostatically stabilized, while in the presence of the copolymers, steric repulsions are responsible for the stability. The PLA:PEG coating also prevented albumin adsorption onto the colloid surface. The evidence that this effect was observed for the PLA:PEG 3:4 coated nanospheres may indicate that a poly(ethylene glycol) chain of 2000 Da can provide an effective repulsive barrier to albumin adsorption. The in vivo results reveal that coating of PLGA nanospheres with PLA:PEG copolymers can alter the biodistribution in comparison to uncoated PLGA nanospheres. Coating of the model polystyrene nanospheres with PLA:PEG copolymers resulted in an initial high circulation level, but after 3 hours the organ deposition data showed values similar to uncoated polystyrene spheres. The difference in the biological behaviour of coated PLGA and polystyrene nanospheres may suggest a different stability of the adsorbed layers on these two systems. A similar biodistribution pattern of PLA:PEG 3:4 to PEG 2:5 coated particles may indicate that poly(ethylene glycol) chains in the range of 2000 to 5000 can produce a comparable effect on in vivo behaviour.     

Determinants of Release Rate of Tetanus Vaccine from Polyester Microspheres

Controlled-release formulations based on poly(lactic) (PLA) and poly(lactic/glycolic) acid (PLGA) microspheres containing tetanus vaccine were designed. The polymers forming the microspheres were L-PLA of different molecular weights and DL-PLGA, 50:50. These microspheres were prepared by two solvent elimination procedures, both using a double emulsion, and were characterized for size, morphology, and toxoid release kinetics. The influence of formulation variables such as polymer type, vaccine composition, and vaccine/polymer ratio was also investigated. Both techniques yielded microspheres with similar size, morphology, and release properties. Microsphere size was dependent on the type of polymer and the presence of the surfactant L--phosphatidylcholine, which led to a reduction in microsphere size. On the other hand, the release kinetics of encapsulated protein were affected by the polymer properties (ratio lactic/glycolic acid and molecular weight) as well as by the vaccine composition, vaccine loading, and microsphere size. Moreover, for some formulations, a decrease in microsphere size occurred simultaneously, with an increase in porosity leading to an augmentation of release rate. The changes in the PLA molecular weight during in vitro release studies indicated that release profiles of tetanus toxoid from these microspheres were only marginally influenced by polymer degradation. A significant fraction of protein (between 15 and 35%) was initially released by diffusion through water-filled channels. In contrast, the decrease in the PLGA molecular weight over the first 10 days of incubation suggested that erosion of the polymer matrix substantially affects protein release from these microspheres. Among all formulations developed, two differing in microsphere size, polymer hydrophobicity, and release profile were selected for in vivo administration to mice. Administration of both formulations resulted in tetanus neutralizing antibody levels that were higher than those obtained after administration of the fluid toxoid.     

Ligand-Specific Targeting of Microspheres to Phagocytes by Surface Modification with Poly(L-Lysine)-Grafted Poly(Ethylene Glycol) Conjugate

Purpose. The purpose of this study was to demonstrate specific receptor-mediated targeting of phagocytes by functional surface coatings of microparticles, shielding from nonspecific phagocytosis and allowing ligand-specific interactions via molecular recognition. Methods. Coatings of the comb polymer poly(L-lysine)-g-poly(ethylene glycol) (PLL-g-PEG) were investigated for potential to inhibit 1) nonspecific spreading of human blood-derived macrophages (MOs) and dendritic cells (DCs) on glass and 2) nonspecific phagocytosis of PLL-g-PEG-coated, carboxylated polystyrene (PS) or biodegradable poly(D,L-lactide-co-glycolide) (PLGA) microspheres. Coating was performed by adsorption of positively charged PLL-g-PEG on negatively charged microparticles or plasma-cleaned glass through electrostatic interaction. The feasibility of ligand-specific interactions was tested with a model ligand, RGD, conjugated to PEG chains of PLL-g-PEG to form PLL-g-PEG-RGD and compared with inactive ligand conjugate, PLL-g-PEG-RDG. Results. Coatings with PLL-g-PEG largely impaired the adherence and spreading of MOs and DCs on glass. The repellent character of PLL-g-PEG coatings drastically reduced phagocytosis of coated PS and PLGA microparticles to 10% in presence of serum. With both MOs and DCs, we observed ligand-specific interactions with PLL-g-PEG-RGD coatings on glass and PS and PLGA microspheres. Ligand specificity was abolished when using inactive ligand conjugate PLL-g-PEG-RDG, whereas repellency of coating was maintained. Conclusions. Coatings of PLL-g-PEG-ligand conjugates provide a novel technology for ligand specific targeting of microspheres to MOs and DCs while reducing nonspecific phagocytosis.     

Stabilization of Proteins Encapsulated in Cylindrical Poly(lactide-co-glycolide) Implants: Mechanism of Stabilization by Basic Additives

Purpose. A previous study from our group has shown that in theacidic microclimate of poly(lactide-co-glycolide) (PLGA) implants,encapsulated BSA forms insoluble noncovalent aggregates and ishydrolyzed during in vitro release. Incorporation of Mg(OH)₂ stronglyinhibits these mechanisms of instability and facilitates continuousprotein release. The purpose of this study was to determine the proteinstabilization mechanism in the presence of basic additives. Methods. BSA, as a model protein, was encapsulated in PLGAmillicylinders by a solvent extrusion method. The release of BSA fromthe PLGA millicylinders with and without basic additives (Mg(OH)₂,Ca(OH)₂, ZnCO₃ and Ca₃(PO₄)₂) in a physiological buffer was carriedout at 37°C and quantified by a modified Bradford assay. The insolubleaggregates extracted from the polymer with acetone were reconstitutedin a denaturing (6 M urea) or denaturing/reducing solvent (6 M urea/10 mM DTT) to determine the type of aggregation. Results. Aggregation of encapsulated BSA was inhibited withincreasing amount of base co-encapsulated in the polymer, irrespective of thetype of base used. The pH drop in the release medium and extent ofacid-catalyzed PLGA degradation were both inhibited in the presenceof base. The resultant effect was also reflected in an increase in wateruptake and porosity of the devices. The inhibition and mechanism ofBSA aggregation was correlated with the basicity of the additive.For Ca(OH)₂, at 3% loading, covalent BSA aggregation due tothiol-disulfide interchange was observed (indicative of ionization ofalbumin's free thiol at high pH), whereas at 3% ZnCO₃ or Ca₃(PO₄)₂, ahigher percentage of non-covalent aggregates was observed comparedto Mg(OH)₂. Decreasing the loading of BSA at constant Mg(OH)₂content caused an increase in BSA aggregation. Conclusions. The mechanism by which Mg(OH)₂ stabilizesencapsulated BSA in PLGA implants is through neutralizing the acidicmicroclimate pH in the polymer. The successful neutralization afforded by thebasic additives requires a percolating network of pores connecting bothbase and protein. The microclimate pH inside PLGA implants can becontrolled by selecting the type of basic salt, which suggests a potentialapproach to optimize the stability of encapsulated pharmaceuticals inPLGA including therapeutic proteins.     

Peptide Acylation by Poly(α-Hydroxy Esters)

Purpose. Poly(lactic acid) (PLA) and poly(lactic-co-glycolic acid) (PLGA) microspheres were investigated concerning the possible acylation of incorporated peptides. Methods. Atrial natriuretic peptide (ANP) and salmon calcitonin (sCT) were encapsulated into PLA and PLGA microspheres. Peptide integrity was monitored by HPLC-MS analysis during microsphere degradation for four weeks. sCT fragmentation with endoproteinase Glu-C was used for identifying modified amino acids. Peptide stability in lactic acid solutions was investigated to elucidate possible mechanisms for preventing peptide acylation. Results. Both peptides were acylated by lactic and glycolic acid units inside degrading microspheres in a time-dependent manner. After 21 days, 60% ANP and 7% sCT inside PLA microspheres were acylated. Fragmentation of sCT with endoproteinase Glu-C revealed that besides the N-terminal amine group, lysine, tyrosine or serine are further possible targets to acylation. Stability studies of the peptides in lactic acid solutions suggest that oligomers are the major acylation source and that lower oligomer concentration and higher pH substantially decreased the reaction velocity. Conclusions. The use of PLA and PLGA for drug delivery needs substantially more circumspection. As, according to FDA standards, the potential hazards of peptide acylation products need to be assessed, our findings may have significant implications for products already on the market. Techniques to minimize the acylation reaction are suggested.     

聚(ε-己内酯) -聚乙二醇-聚(ε-己内酯)两亲三嵌段共聚物蛋白大分子药物微球的研究

目的:研究以聚(ε-己内酯) -聚乙二醇-聚(ε-己内酯) (PCE)制备蛋白大分子药物微球的方法及其与成品理化性质和释放动力学的关系。方法:采用复乳溶剂挥发法制备牛血清白蛋白(BSA) PCE微球,以扫描电镜观察微球的表面形态,以Mi-croBCA法测定微球载药量和包封率,以累积释放量考察微球体外释药特性。结果:微球外形圆整、表面光滑。不同分子量PCE微球载药量和包封率相近,但体外释药特性显著不同,释放机制为扩散-降解,其中PCE4000因扩散作用释出的蛋白量明显低于其它分子量所制微球。微球体外释药规律符合扩散-溶蚀(Q=k1t1/2+k2t+k3t2+k4t3)(r=0.997)方程。结论:以PCE制备蛋白大分子药物微球具有良好的缓释效果,突释小,释放完全。     

The Stabilization and Encapsulation of Human Growth Hormone into Biodegradable Microspheres

Purpose. To produce and evaluate sustained-acting formulations of recombinant human growth hormone (rhGH) made by a novel microencapsulation process. Methods. The protein was stabilized by forming an insoluble complex with zinc and encapsulated into microspheres of poly (D,L-lactide co-glycolide) (PLGA) which differed in polymer molecular weight (8–3 1kD), polymer end group, and zinc content. The encapsulation procedure was cryogenic, non-aqueous, and did not utilize surfactants or emulsification. The rhGH extracted from each of these microsphere formulations was analyzed by size-exclusion, ion-exchange and reversed-phase chromatography, SDS-polyacrylamide gel electrophoresis, peptide mapping, and cell proliferation of a cell line expressing the hGH receptor. In addition, the in vivorelease profile was determined after subcutaneous administration of the microspheres to rats and juvenile rhesus monkeys. Results. Protein and bioactivity analyses of the rhGH extracted from three different microsphere formulations showed that the encapsulated protein was unaltered relative to the protein before encapsulation. In vivo, microsphere administration to rats or monkeys induced elevated levels of serum rhGH for up to one month, more than 20-fold longer than was induced by the same amount of protein injected subcutaneously as a solution. The rate of protein release differed between the three microsphere formulations and was determined by the molecular weight and hydrophobicity of the PLGA. The serum rhGH profile, after three sequential monthly doses of the one formulation examined, was reproducible and showed no dose accumulation. Conclusions. Using a novel process, rhGH can be stabilized and encapsulated in a solid state into PLGA microspheres and released with unaltered properties at different rates.     

The Preparation and Evaluation of Drug-Containing Poly(dl-lactide) Microspheres Formed by the Solvent Evaporation Method

Several compounds such as caffeine, diazepam, hydrocortisone, progesterone, quinidine, quinidine hydrochloride, quinidine sulfate, and theophylline were evaluated for incorporation into poly(dl-lactide) (PLA) microspheres using the solvent evaporation technique. The process is generally limited to the entrapment of water-insoluble drugs. Adjustment of the pH of the aqueous phase to minimize drug solubility resulted in increased drug contents within the microspheres in the case of ionizable drugs. The release profile of quinidine from the microspheres was characterized by three different release phases, a lag time with no drug release, a burst effect of rapid drug release within a short period of time, and a slow release phase, respectively. The structure of the microsphere surface layer, which was a function of the pH of the aqueous phase at preparation, strongly influenced the rate and amount of drug released. Thermal analysis of quinidine-loaded microspheres revealed three thermal events, corresponding to the glass transition temperature of the polymer and to the recrystallization and melting of quinidine.     

Controlled Protein Release from Polyethyleneimine-Coated Poly(L-lactic Acid)/Pluronic Blend Matrices

Protein release from degradable polymer matrices, composed of poly(L-lactic acid) and its blends with Pluronic surfactant, was investigated with and without the aqueous coating of an adsorptive water-soluble polymer, polyethyleneimine (PEI). PEI is a highly branched cationic polymer containing primary, secondary, and tertiary amino groups in its backbone. The treatment of PEI for PLA/Pluronic blend films exhibited a remarkable decrease in the burst release of protein at an initial stage and a significant extension in the protein release period. Protein release profiles could be controlled by varying PEI treatment time and its concentration. Our results suggest that PEI diffuses into the polymer matrices and crosslinks protein molecules by ionic interactions. Such a PEI–protein network near the surface region of matrix may act as a diffusional barrier for further release of protein molecules.     

Surface modification of poly (l-lactic acid) microspheres for site-specific delivery of ketoprofen for chronic inflammatory disease

The purpose of this research was to investigate the potential of surface modified Poly (l-lactic acid) (PLA) microspheres as a carrier for site-specific delivery of anti-inflammatory drug, ketoprofen, for the treatment of rheumatoid arthritis. Microspheres were prepared by solvent evaporation method using 20% w/w PLA in methylene chloride and 100 mL of a 2.5% poly vinyl alcohol (PVA) solution. Formulations were optimized for several processing parameters like drug to polymer ratio, stirring rate and volume of preparation medium etc. The surface of PLA microspheres was modified with gelatin to impart fibronectin recognition. The microspheres were characterized by surface morphology, size distribution, encapsulation efficiency, and by in vitro drug release studies. The prepared microspheres were light yellow, discrete, and spherical. Formulation with optimum drug to polymer ratio exhibited smallest vesicle size (43.02), high drug encapsulation efficiency (81.11) and better process yield (83.45). The release of drug was extended up to 24 h with Higuchi pattern of drug release. The in vivo results showed that the gelatin modified formulation reduced paw edema at greater extent than pure drug and PLA microspheres and it could be a promising carrier system for controlled and site-specific delivery of ketoprofen with possible clinical applications.     

Stabilization of 10-Hydroxycamptothecin in Poly(lactide-co-glycolide) Microsphere Delivery Vehicles

Purpose. The purpose of this study was to investigate the potential of poly(lactide-co-glycolide) (PLGA) microspheres to stabilize and deliver the analogue of camptothecin, 10-hydroxycamptothecin (10-HCPT). Methods. 10-HCPT was encapsulated in PLGA 50:50 microspheres by using an oil-in-water emulsion-solvent evaporation method. The influence of encapsulation conditions (i.e., polymer molecular weight (M_w), polymer concentration, and carrier solvent composition) on the release of 10-HCPT from microspheres at 37°C under perfect sink conditions was examined. Analysis of the drug stability in the microspheres was performed by two methods:i) by extraction of 10-HCPT from microspheres and ii). by sampling release media before lactone— carboxylate conversion could take place. Results. Microspheres made, of low M_w polymer (inherent viscosity 0.15 dl/g) exhibited more continuous drug release than those prepared from polymers of higher M_w (i.v. = 0.58 and 1.07 dl/g). In addition, a high polymer concentration and the presence of cosolvent in the carrier solution to dissolve 10-HCPT were both necessary in the microsphere preparation in order to eliminate a large initial burst of the released 10-HCPT. An optimal microsphere formulation released 10-HCPT slowly and continuously for over two months with a relatively small initial burst of the released drug. Both analytical methods used to assess the stability of 10-HCPT revealed that the unreleased camptothecin analogue in the microspheres remained in its active lactone form (>95%) over the entire 2-month duration of study. Conclusions. PLGA carriers such as those described here may be clinically useful to stabilize and deliver camptothecins for the treatment of cancer.     

Monitoring Microviscosity and Microacidity of the Albumin Microenvironment Inside Degrading Microparticles from Poly(lactide-co-glycolide) (PLG) or ABA-triblock Polymers Containing Hydrophobic Poly(lactide-co-glycolide) A Blocks and Hydrophilic Poly(ethyleneoxide) B Blocks

Purpose. The purpose of this study was to monitor the microenvironment of an encapsulated model protein during the release from biodegradable microparticles (MP) made from three different polymers, namely poly(lactide-co-glycolide) (PLG) and ABA-triblock polymers containing hydrophobic poly(lactide-co-glycolide) A blocks and hydrophilic poly(ethyleneoxide) B blocks with an A:B ratio of 90:10 (ABA10) and 70:30 (ABA30). Methods. MP loaded with spin labeled albumin were prepared by a w/o/w technique. The particles were characterized by light scattering and electron microscopy. In vitro release of albumin was determined by size exclusion chromatography. Light microscopic experiments were conducted to visualize water penetration in the matrix. The protein microenvironment inside the degrading microparticles was characterized noninvasively by 2 GHz EPR spectroscopy. Results. Water penetrated rapidly into all MP in the range of few minutes. A burst release was observed for PLG. The release from ABA block-polymers continued for over 14 days despite the rapid solubilization of the protein inside the microparticles. The initial microviscosity of the protein environment inside the ABA particles after exposure to buffer was 2 mm²/s and increased with time. A gradual decrease of the pH to a value of 3.5 was observed within the MP. Conclusions. The data indicate that the microviscosity and microacidity inside protein loaded microparticles can be studied nondestructively by EPR spectroscopy. Our results clearly demonstrate that ABA-block polymers are superior to PLG allowing a controlled release of proteins from swollen microspheres.     

Controlled Delivery Systems for Proteins Based on Poly(Lactic/Glycolic Acid) Microspheres

This paper describes an investigation of the use of poly(lactic/glycolic acid) polymers for long-term delivery of high molecular weight, water-soluble proteins. Poly(lactic/glycolic acid) (PLGA) microspheres, containing (fluorescein isothiocyanate)-labeled bovine serum albumin and (fluorescein isothiocyanate)-labeled horseradish peroxidase, were prepared by a modified solvent evaporation method using a double emulsion. The microspheres were spherical with diameters of 55–95 µm and encapsulated more than 90% of the protein. The preparation method was gentle and maintained enzyme activity and protein solubility. Stability studies showed that the encapsulation of an enzyme inside PLGA microspheres can protect them from activity loss. When not placed inside PLGA microspheres, (fluorescein isothiocyanate)-labeled horseradish peroxidase lost 80% of its activity in solution at 37°C in a few days, whereas inside the PLGA microspheres it retained more than 55% of its activity after 21 days of incubation at 37°C. In vitro release studies revealed that different release profiles (i.e., near-constant or biphasic) and release rates can be achieved by simply modifying factors in the preparation procedure such as mixing rate and volume of inner water and organic phases. Degradation studies by scanning electron microscopy and gel-permeation chromatography suggested that the mechanism responsible for protein release is mainly through matrix erosion.