Synthesis of N‐(3‐[18F]Fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐iodophenyl)nortropane ([18F]FP‐β‐CIT)

N‐(3‐[¹⁸F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐iodophenyl)nortropane ([¹⁸F]FP‐β‐CIT) was synthesized in a two‐step reaction sequence. In the first reaction, 1‐bromo‐3‐(nitrobenzene‐4‐sulfonyloxy)‐propane was fluorinated with no‐carrier‐added fluorine‐18. The resulting product, 1‐bromo‐3‐[¹⁸F]‐fluoropropane, was distilled into a cooled reaction vessel containing 2β‐carbomethoxy‐3β‐(4‐iodophenyl)‐nortropane, diisopropylethylamine and potassium iodide. After 30 min, the reaction mixture was subjected to a preparative HPLC purification. The product, [¹⁸F]FP‐β‐CIT, was isolated from the HPLC eluent with solid‐phase extraction and formulated to yield an isotonic, pyrogen‐free and sterile solution of [¹⁸F]FP‐β‐CIT. The overall decay‐corrected radiochemical yield was 25 ± 5%. Radiochemical purity was > 98% and the specific activity was 94 ± 50 GBq/µmol at the end of synthesis. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of [18F]‐labeled 2′‐deoxy‐2′‐fluoro‐5‐methyl‐1‐β‐D‐arabinofuranosyluracil ([18F]‐FMAU)

Synthesis of 2′‐deoxy‐2′‐[¹⁸F]fluoro‐5‐methyl‐1‐β‐D‐arabinofuranosyluracil ([¹⁸F]‐FMAU) is reported. 2‐Deoxy‐2‐[¹⁸F]fluoro‐1,3,5‐tri‐O‐benzoyl‐α‐D‐arabinofuranose 2 was prepared by the reaction of the respective triflate 1 with tetrabutylammonium[¹⁸F]fluoride. The fluorosugar 2 was converted to its 1‐bromo‐derivative 3 and coupled with protected thymine 4 . The crude product mixture ( 5a and 5b ) was hydrolyzed in base and purified by HPLC to obtain the radiolabeled FMAU 6a . The radiochemical yield of 6a was 20–30% decay corrected (d.c.) in four steps with an average of 25% in four runs. Radiochemical purity was >99% and average specific activity was 2300 mCi/μmol at the end of synthesis (EOS). The synthesis time was 3.5–4.0 h from the end of bombardment (EOB). Copyright © 2002 John Wiley & Sons, Ltd.     

Fully automated synthesis and purification of 4‐(2′‐methoxyphenyl)‐1‐[2′‐(N‐2″‐pyridinyl)‐p‐[18F]fluorobenzamido]ethylpiperazine

We have developed an efficient synthesis method for the rapid and high‐yield automated synthesis of 4‐(2′‐methoxyphenyl)‐1‐[2′‐(N‐2″‐pyridinyl)‐p‐[¹⁸F]fluorobenzamido]ethylpiperazine (p‐[¹⁸F]MPPF). No‐carrier‐added [¹⁸F]F^? was trapped on a small QMA cartridge and eluted with 70% MeCN(aq) (0.4 mL) containing Kryptofix 222 (2.3 mg) and K₂CO₃ (0.7 mg). The nucleophilic [¹⁸F]fluorination was performed with 3 mg of the nitro‐precursor in DMSO (0.4 mL) at 190 °C for 20 min, followed by the preparative HPLC purification (column: COSMOSIL Cholester, Nacalai Tesque, Kyoto, Japan; mobile phase: MeCN/25 mm AcONH₄/AcOH = 200/300/0.15; flow rate: 6.0 mL/min) to afford p‐[¹⁸F]MPPF (retention time = 9.5 min). p‐[¹⁸F]MPPF was obtained automatically with a radiochemical yield of 38.6 ± 5.0% (decay corrected, n = 5), a specific activity of 214.3 ± 21.1 GBq/µmol, and a radiochemical purity of >99% within a total synthesis time of about 55 min. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of 1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐[Methyl‐11C]thymine ([11C]FMAU) via a Stille cross‐coupling reaction with [11C]methyl iodide

1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐[methyl‐¹¹C]thymine ([¹¹C]FMAU) [¹¹C]‐ 1 was synthesised via a palladium‐mediated Stille coupling reaction of 1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐5‐(trimethylstannyl)uracil 2 with [¹¹C]methyl iodide in a one‐pot procedure. The reaction conditions were optimized by screening various catalysts and solvents, and by altering concentrations and reaction temperatures. The highest yield was obtained using Pd₂(dba)₃ and P(o‐tolyl)₃ in DMF at 130°C for 5 min. Under these conditions the title compound [¹¹C]‐ 1 was obtained in 28±5% decay‐corrected radiochemical yield calculated from [¹¹C]methyl iodide (number of experiments=7). The radiochemical purity was >99% and the specific radioactivity was 0.1 GBq/μmol at 25 min after end of bombardment. In a typical experiment 700–800 MBq of [¹¹C]FMAU [¹¹C]‐ 1 was obtained starting from 6–7 GBq of [¹¹C]methyl iodide. A mixed ¹¹C/¹³C synthesis to yield [¹¹C]‐ 1 /(¹³C)‐ 1 followed by ¹³C‐NMR analysis was used to confirm the labelling position. The labelling procedure was found to be suitable for automation. Copyright © 2002 John Wiley & Sons, Ltd.     

Radiosynthesis of the α4β2 nicotinic acetylcholine receptor ligand: 5‐((1‐[11C]‐methyl‐2‐(S)‐pyrrolidinyl)methoxy)‐2‐chloro‐3‐((E)‐2‐(2‐fluoropyridin‐4‐yl)vinyl)pyridine

5‐((1‐[¹¹C]‐methyl‐2‐(S)‐pyrrolidinyl)methoxy)‐2‐chloro‐3‐((E)‐2‐(2‐fluoropyridin‐4‐yl)‐vinyl)pyridine ([¹¹C]‐FPVC) was synthesized from [¹¹C]‐methyl iodide and the corresponding normethyl precursor. The average time of synthesis, purification, and formulation was 42 min with an average non‐decay‐corrected radiochemical yield of 19%. The average specific radioactivity was 359 GBq/µmol (9691 mCi/µmole) at end of synthesis (EOS). Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of (E)‐2,3′,4,5′‐tetramethoxy[2‐11C]stilbene

In this paper, we describe the radiosynthesis of the compound (E)‐2,3′,4,5′‐tetramethoxy[2‐¹¹C]stilbene, a potential, universal tumour positron emission tomography imaging agent. The production of (E)‐2,3′,4,5′‐tetramethoxy[2‐¹¹C]stilbene was carried out via ¹¹C‐methylation of (E)‐2‐(hydroxy)‐3′,4,5′‐trimethoxystilbene by using [¹¹C]methyl trifluoromethanesulfonate ([¹¹C]methyl triflate). (E)‐2,3′,4,5′‐tetramethoxy[2‐¹¹C]stilbene was obtained with a radiochemical purity greater than 95% in a 20 ± 2% decay‐corrected radiochemical yield, based upon [¹¹C]carbon dioxide. Synthesis, purification and formulation were completed on an average of 30 min following the end of bombardment (EOB). The specific radioactivity obtained was 1.9 ± 0.6 GBq/µmol at EOB. Copyright © 2007 John Wiley & Sons, Ltd.     

Simplified synthesis of N‐(3‐[18F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐fluorophenyl)nortropane ([18F]β‐CFT‐FP) using [18F]fluoropropyl tosylate as the labelling reagent

A synthesis method has been developed for the labelling of N‐(3‐[¹⁸F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐fluorophenyl)nortropane ([¹⁸F]β‐CFT‐FP), a potential radioligand for visualization of the dopamine transporters by positron emission tomography. The two‐step synthesis includes preparation of [¹⁸F]fluoropropyl tosylate and its use without purification in the fluoroalkylation of 2β‐carbomethoxy‐3β‐(4‐fluorophenyl)nortropane (nor‐β‐CFT). The final product is purified by HPLC. Optimization of the two synthesis steps resulted in a greater than 30% radiochemical yield of [¹⁸F]β‐CFT‐FP (decay corrected to end of bombardment). The synthesis time including HPLC‐purification was approximately 90 min. The radiochemical purity of the final product was higher than 99% and the specific radioactivity at the end of synthesis was typically 20 GBq/µmol. In comparison to alkylation by [¹⁸F]fluoropropyl bromide, the procedure described here results in an improved overall radiochemical yield of [¹⁸F]β‐CFT‐FP in a shorter time. Copyright © 2005 John Wiley & Sons, Ltd.     

Radiosynthesis of 2‐exo‐(2′‐[18F]Fluoro‐3′‐(4‐fluorophenyl)‐pyridin‐5′‐yl)‐7‐azabicyclo[2.2.1]heptane ([18F]F2PhEP), a potent epibatidine‐based radioligand for nicotinic acetylcholine receptor PET imaging

2‐exo‐(2′‐Fluoro‐3′‐(4‐fluorophenyl)‐pyridin‐5′‐yl)‐7‐azabicyclo[2.2.1]heptane (F₂PhEP), a novel, epibatidine‐based, α4β2‐selective nicotinic acetylcholine receptor antagonist of low toxicity, as well as the corresponding N‐Boc‐protected chloro‐ and bromo derivatives as precursors for labelling with fluorine‐18 were synthesized from 7‐tert‐butoxycarbonyl‐7‐azabicyclo[2.2.1]hept‐2‐ene in 13, 19 and 8% overall yield, respectively. [¹⁸F]F₂PhEP was prepared in 8–9% overall yield (non‐decay‐corrected) using 1 mg of the bromo derivative in the following two‐step radiochemical process: (1) no‐carrier‐added nucleophilic heteroaromatic ortho‐radiofluorination with the activated K[¹⁸F]F‐Kryptofix^®₂₂₂ complex in DMSO using microwave activation at 250 W for 90 s, followed by (2) quantitative TFA‐induced removal of the N‐Boc protective group. Radiochemically pure (>95%) [¹⁸F]F₂PhEP (1.48–1.66 GBq, 74–148 GBq/µmol) was obtained after semi‐preparative HPLC (Symmetry^® C18, eluent aqueous 0.05 M NaH₂PO₄ CH₃CN: 78/22 (v:v)) in 75–80 min starting from an 18.5 GBq aliquot of a cyclotron‐produced [¹⁸F]fluoride production batch. Copyright © 2006 John Wiley & Sons, Ltd.     

Automated cGMP‐compliant radiosynthesis of [18F]‐(E)‐PSS232 for brain PET imaging of metabotropic glutamate receptor subtype 5

(E)‐3‐(Pyridin‐2‐yl ethynyl)cyclohex‐2‐enone O‐(3‐(2‐[¹⁸F]‐fluoroethoxy)propyl) oxime ([¹⁸F]‐(E)‐PSS232, [¹⁸F] 2a ) is a recently developed radiotracer that can be used to visualize metabotropic glutamate receptor subtype 5 (mGlu₅) in vivo. The mGlu₅ has become an attractive therapeutic and diagnostic target owing to its role in many neuropsychiatric disorders. Several carbon‐11‐labeled and fluorine‐18‐labeled radiotracers have been developed to measure mGlu₅ receptor occupancy in the human brain. The radiotracer [¹⁸F] 2a , which is used as an analogue for [¹¹C]ABP688 ([¹¹C] 1 ) and has a longer physical half‐life, is a selective radiotracer that exhibits high binding affinity for mGlu₅. Herein, we report the fully automated radiosynthesis of [¹⁸F] 2a using a commercial GE TRACERlab? FX‐_FN synthesizer for routine production and distribution to nearby satellite clinics. Nucleophilic substitution of the corresponding mesylate precursor with cyclotron‐produced [¹⁸F]fluoride ion at 100°C in dimethyl sulfoxide (DMSO), followed by high‐performance liquid chromatography (HPLC) purification and formulation, readily provided [¹⁸F] 2a with a radiochemical yield of 40 ± 2% (decay corrected, n = 5) at the end of synthesis. Radiochemical purity for the [¹⁸F]‐(E)‐conformer was greater than 95%. Molar activity was determined to be 63.6 ± 9.6 GBq/μmol (n = 5), and the overall synthesis time was 70 minutes.     

Synthesis and biodistribution studies of two novel radioiodinated areno‐annelated estra‐1,3,5(10),16‐tetraene‐3‐ols as promising estrogen receptor radioligands

Two novel radioiodinated areno‐annelated estra‐1,3,5(10),16‐tetraenes, [¹²⁵I]2‐iodo‐1′‐methoxybenzo[4′,3′:16,17]estra‐1,3,5(10),16‐tetraene‐3‐ol ( 2 ‐[ ¹²⁵ I ]‐ MEBE ) and [¹²⁵I]4‐iodo‐1′‐methoxybenzo[4′,3′:16,17]estra‐1,3,5(10),16‐tetraene‐3‐ol, ( 4 ‐[ ¹²⁵ I ]‐ MEBE ) were synthesized for evaluation as potential ligands for the estrogen receptor. Radioiodination of 1′‐methoxybenzo[4′,3′:16,17]estra‐1,3,5(10),16‐tetraene‐3‐ol at the A ring was accomplished by electrophilic aromatic substitution using [¹²⁵I] sodium iodide and chloramine‐T as oxidant. After purification by reverse phase HPLC, the two radioisomers ( 2 ‐[ ¹²⁵ I ]‐ MEBE and 4 ‐[ ¹²⁵ I ]‐ MEBE ) were obtained in a radiochemical yield of 42 and 48%, respectively, in a radiochemical purity of greater than 95% and a high specific activity. The effect of the site of radioiodination (C₂ vs C₄) on the biological behaviour of the molecules was evaluated through biodistribution studies in immature female Sprague‐Dawley rats. Both 2 ‐[ ¹²⁵ I ]‐ MEBE and 4 ‐[ ¹²⁵ I ]‐ MEBE are stable in vivo and are mainly excreted through the hepatobiliary pathway. Both localize in the uterus and ovaries via a receptor‐mediated process, where the 2 ‐[ ¹²⁵ I ]‐ MEBE isomer has the higher specific ER binding and uterus selectivity. The favourable in vitro/in vivo stability and biodistribution profiles suggest that these radioligands are good candidates for further exploration of their potential clinical application. Copyright © 2006 John Wiley & Sons, Ltd.     

Efficient synthesis of 6‐chloro‐3‐((2‐(S)‐azetidinyl)methoxy)‐5‐((E)‐2‐(2‐[18F]fluoropyridin‐4‐yl)vinyl)pyridine ([18F]NIDA 52289), a very high affinity radioligand for nicotinic acetylcholine receptors

6‐Chloro‐3‐((2‐(S)‐azetidinyl)methoxy)‐5‐((E)‐2‐(2‐[¹⁸F]fluoropyridin‐4‐yl)vinyl)pyridine ([¹⁸F]NIDA 52289), a very high affinity radioligand for studying nicotinic acetylcholine receptors (nAChRs) by positron‐emission tomography, was synthesized through Kryptofix 222 assisted no‐carrier‐added nucleophilic [¹⁸F]fluorination of 6‐chloro‐3‐((1‐(tert‐butoxycarbonyl)‐2‐(S)‐azetidinyl)methoxy)‐5‐((E)‐2‐(2‐bromopyridin‐4‐yl)vinyl)pyridine, followed by acidic deprotection. The overall radiochemical yield of the radiosynthesis was 10% (non‐decay‐corrected), the specific radioactivity was in the range of 93–326 GBq/µmol (2.5–8.8 mCi/µmol) and the radiochemical purity was greater than 99%. Copyright © 2004 John Wiley & Sons, Ltd.     

Radiosynthesis of 1′‐[18F]fluoroethyl‐β‐D‐lactose ([18F]‐FEL) for early detection of pancreatic carcinomas with PET

Introduction: The hepatocellular carcinoma–intestine–pancreas and pancreatitis‐associated proteins, also known as lactose‐binding protein, is upregulated in peritumoral pancreatic tissue. Previously, we reported ethyl‐ β ‐D ‐galactopyranosyl‐(1,4′)‐2′‐deoxy‐2′‐[¹⁸F]fluoro‐ β ‐D ‐glucopyranoside (Et‐[¹⁸F]‐FDL), a radiofluorinated lactose analog for positron emission tomography (PET) of small pancreatic carcinomas in mice. However, synthesis of the precursor for Et‐[¹⁸F]‐FDL involves 11 steps, which is quite lengthy, and produces overall low yields. Here, we report on synthesis and radiolabeling of another analog of lactose, the 1′‐[¹⁸F]fluoroethyl‐ β ‐D ‐lactose for PET imaging of pancreatic carcinomas. Methods: Two precursor compounds, 1′‐bromoethyl‐2′,3′,6′,2,3,4,6‐hepta‐O‐acetyl‐ β ‐D ‐lactose 4, and 1′‐p‐toluenesulfonylethyl‐2′,3′,6′,2,3,4,6‐hepta‐O‐acetyl‐ β ‐D ‐lactose 5, were synthesized in two and three steps, respectively; then, cold fluorination and radiofluorination of these precursors were performed. The reaction mixture was passed through a silica gel Sep‐pack cartridge, eluted with EtOAc, and the 1′‐[¹⁸F]fluoroethyl‐2′,3′,6′,2,3,4,6‐hepta‐O‐acetyl‐ β ‐D ‐lactose ([¹⁸F]‐6) purified by HPLC. After hydrolysis of the protecting groups, the 1′‐[¹⁸F]fluoroethyl‐ β ‐D ‐lactose [¹⁸F]‐7 was neutralized, diluted with saline, filtered through a sterile Millipore filter, and analyzed by radio‐TLC. Results: The average decay‐corrected radiochemical yield was 9% (n = 7) with>99% radiochemical purity and specific activity of 55.5 GBq/ µ mol. Conclusion : A new analog of lactose, 1′‐[¹⁸F]fluoroethyl‐ β ‐D ‐lactose, has been synthesized in good yields, with high purity and high specific activity suitable for PET imaging of early pancreatic carcinomas. Copyright © 2011 John Wiley & Sons, Ltd.     

Radiosynthesis of [123I]N‐(3‐iodoprop‐(2E)‐enyl)‐2α‐(imino‐methyl)‐3β‐(3′,4′‐dichlorophenyl) nortropane as a potential SPET tracer for dopamine transporter

The radiosynthesis of a novel tropane derivative [¹²³I]KUC‐25019, [[¹²³I];N‐(3‐iodoprop‐(2E)‐enyl)‐2α‐(imino‐methyl)‐3β‐(3′,4′‐dichlorophenyl)nortropane], a potential inhibitor of the dopamine transporter is reported. The synthetic routes include the preparation of standard reference, the stannyl precursor and the ¹²³I‐labeling synthesis. The no‐carrier‐added ¹²³I‐labeling has about 20% yield, the specific activity of [¹²³I]KUC‐25019 is > 107 GBq/µmol and the radiochemical purity of [¹²³I] KUC‐25019 is >95%. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of 3′‐deoxy‐3′‐[18F]fluoro‐1‐β‐D‐xylofuranosyluracil ([18F]‐FMXU) for PET

The synthesis of a pyrimidine analog, 3′‐deoxy‐3′‐[¹⁸F]‐fluoro‐1‐β‐D ‐xylofuranosyluracil ([¹⁸F]‐FMXU) is reported. 5‐Methyluridine 1 was converted to its di‐methoxytrityl derivatives 2 and 3 as a mixture. After separation the 2′,5′‐di‐methoxytrityluridine 2 was converted to its 3′‐triflate 4 followed by derivatization to the respective N³‐t‐Boc product 5 . The triflate 5 was reacted with tetrabutylammonium[¹⁸F]fluoride to produce 6 , which by acid hydrolysis yielded compound 7 . The crude preparation was purified by HPLC to obtain the desired product [¹⁸F]‐FMXU. The radiochemical yields were 25–40% decay corrected (d. c.) with an average of 33% in four runs. Radiochemical purity was >99% and specific activity was >74 GBq/µmol at the end of synthesis (EOS). The synthesis time was 67–75 min from the end of bombardment (EOB). Copyright © 2005 John Wiley & Sons, Ltd.     

18F‐labelling of a potent nonpeptide CCR1 antagonist: synthesis of 1‐(5‐chloro‐2‐{2‐[(2R)‐4‐(4‐[18F]fluorobenzyl)‐2‐methylpiperazin‐1‐yl]‐2‐oxoethoxy}phenyl)urea in an automated module

The synthesis of 1‐(5‐chloro‐2‐{2‐[(2R)‐4‐(4‐[¹⁸F]fluorobenzyl)‐2‐methylpiperazin‐1‐yl]‐2‐oxoethoxy}phenyl)urea ( [¹⁸F]4 ), a potent nonpeptide CCR1 antagonist, is described as a module‐assisted two‐step one‐pot procedure. The final product was obtained utilizing the reductive amination of the formed 4‐[¹⁸F]fluorobenzaldehyde ( 2 ) with a piperazine derivative 3 and sodium cyanoborohydride. After HPLC purification of the final product [¹⁸F]4 , its solid phase extraction, formulation and sterile filtration, the isolated (not decay‐corrected) radiochemical yields of [¹⁸F]4 were between 7 and 13% (n=28). The time of the entire manufacturing process did not exceed 95 min. The radiochemical purity of [¹⁸F]4 was higher than 95%, the chemical purity ?60% and the enantiomeric purity >99.5%. The specific radioactivity was in the range of 59–226 GBq/µmol at starting radioactivities of 23.6–65.0 GBq [¹⁸F]fluoride. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of 3H and 14C labeled (S)‐3‐(5‐chloro‐2‐methoxyphenyl)‐1,3‐dihydro‐3‐fluoro‐6‐(trifluoromethyl)‐2H‐indol‐2‐one,maxipost™. An agent for post‐stroke neuroprotection

The syntheses of tritium labeled (S)‐3‐(5‐chloro‐2‐[OC³H₃]methoxyphenyl‐1,3‐dihydro‐3‐fluoro‐6‐(trifluoromethyl)‐1H‐indol‐2‐one, and carbon‐14 (S)‐3‐(5‐chloro‐2‐methoxyphenyl)‐1,3‐dihydro‐3‐fluoro‐6‐(trifluoromethyl)‐2H‐[2,3‐¹⁴C₂] indol‐2‐one are reported. The ³H‐labeled compound was prepared in a two‐step synthesis from C³H₃I. The final product was purified via chiral HPLC to yield the desired enantiomer in a 4% radiochemical yield and a specific activity of 60 Ci/mmol. The ¹⁴C‐labeled compound was prepared in a four‐step synthesis from diethyl [carboxylate‐¹⁴C₁,₂] oxalate. The final product was purified via chiral HPLC to yield the desired enantiomer in a 20% radiochemical yield and a specific activity of 28.4 μCi/mg. Copyright © 2002 John Wiley & Sons, Ltd.     

Radiosynthesis of 3‐(2′‐[18F]fluoro)‐flumazenil ([18F]FFMZ)

Recently, two fluorine‐18 labelled derivatives of flumazenil were described: 5‐(2′‐[¹⁸F]fluoroethyl)‐5‐desmethylflumazenil (ethyl 8‐fluoro‐5‐[¹⁸F]fluoroethyl‐6‐oxo‐5,6‐dihydro‐4H‐benzo‐[f]imidazo[1,5‐a] [1,4]diazepine‐3‐carboxylate; [¹⁸F]FEFMZ) and 3‐(2′‐[¹⁸F]fluoro)‐flumazenil (2′‐[¹⁸F]fluoroethyl 8‐fluoro‐5‐methyl‐6‐oxo‐5,6‐dihydro‐4H‐benzo‐[f]imidazo[1,5‐a]‐[1,4]diazepine‐3‐carbo‐ xylate; [¹⁸F]FFMZ). Since the biodistribution data of the latter were superior to those of the former we developed a synthetic approach for [¹⁸F]FFMZ starting from a commercially available precursor, thereby obviating the need to prepare a precursor by ourselves. The following two‐step procedure was developed: First, [¹⁸F]fluoride was reacted with 2‐bromoethyl triflate using the kryptofix/acetonitrile method to yield 2‐bromo‐[¹⁸F]fluoroethane ([¹⁸F]BFE). In the second step, distilled [¹⁸F]BFE was reacted with the tetrabutylammonium salt of 3‐desethylflumazenil (8‐fluoro‐5‐methyl‐6‐oxo‐5,6‐dihydro‐4H‐benzo‐[f]imidazo[1,5‐a] [1,4]diazepine‐3‐carboxylic acid) to yield [¹⁸F]FFMZ. The synthesis of [¹⁸F]FFMZ allows for the production of up to 7 GBq of this PET‐tracer, enough to serve several patients. [¹⁸F]FFMZ synthesis was completed in less than 80 min and the radiochemical purity exceeded 98%. Copyright © 2003 John Wiley & Sons, Ltd.     

Microfluidic radiosynthesis and biodistribution of [18F] 2‐(5‐fluoro‐pentyl)‐2‐methyl malonic acid

Microfluidics technology has emerged as a powerful tool for the radiosynthesis of positron emission tomography (PET) and single‐photon emission computed tomography radiolabeled compounds. In this work, we have exploited a continuous flow microfluidic system (Advion, Inc., USA) for the [¹⁸F]‐fluorine radiolabeling of the malonic acid derivative, [¹⁸F] 2‐(5‐fluoro‐pentyl)‐2‐methyl malonic acid ([¹⁸F]‐FPMA), also known as [¹⁸F]‐ML‐10, a radiotracer proposed as a potential apoptosis PET imaging agent. The radiosynthesis was developed using a new tosylated precursor. Radiofluorination was initially optimized by manual synthesis and served as a basis to optimize reaction parameters for the microfluidic radiosynthesis. Under optimized conditions, radio‐thin‐layer chromatography analysis showed 79% [¹⁸F]‐fluorine incorporation prior to hydrolysis and purification. Following hydrolysis, the [¹⁸F]‐FPMA was purified by C18 Sep‐Pak, and the final product was analyzed by radio‐HPLC (high‐performance liquid chromatography). This resulted in a decay‐corrected 60% radiochemical yield and ≥98% radiochemical purity. Biodistribution data demonstrated rapid blood clearance with less than 2% of intact [¹⁸F]‐FPMA radioactivity remaining in the circulation 60 min post‐injection. Most organs showed low accumulation of the radiotracer, and radioactivity was predominately cleared through kidneys (95% in 1 h). Radio‐HPLC analysis of plasma and urine samples showed a stable radiotracer at least up to 60 min post‐injection.     

Radiosynthesis of N‐[4‐(4‐fluorobenzyl)piperidin‐1‐yl]‐N′‐(2‐[11C]oxo‐1,3‐dihydrobenzimidazol‐5‐yl)oxamide,a NR2B‐selective NMDA receptor antagonist

In order to perform in vivo imaging of the NR2B NMDA receptor system by positron emission tomography, a NR2B selective NMDA receptor antagonist has been labelled with carbon‐11 (half‐life: 20 min). N‐[4‐(4‐fluorobenzyl)piperidin‐1‐yl]‐N′‐(2‐oxo‐1,3‐dihydrobenzimidazol‐5‐yl)oxamide has been described demonstrating high affinity and selectivity for the NR2B receptors (IC₅₀ of 5 nM in [³H]Ro‐25,6981 binding assay). The labelling precursor and the reference compound were synthesized by coupling the 4‐(4‐fluorobenzyl)piperidine with the corresponding oxalamic acid. The reaction of [¹¹C]phosgene with phenylenediamine precursor led the formation of the [¹¹C]benzimidazolone ring present on the ligand. The labelling occurred in THF or acetonitrile and the decay corrected radiochemical yield was 30–40% from the produced [¹¹C]methane. HPLC purification and formulation led to 2.6–3.7 GBq (70–100 mCi) of radioligand within 30–35 min. The specific radioactivity was 72–127 GBq/µmol (2–3.4 Ci/µmol) at the end of synthesis. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of 14C‐labelled myosmine, [2′‐14C] ‐3‐(1‐pyrrolin‐2‐yl)pyridine

¹⁴C‐Labelled myosmine ([2′‐¹⁴C]‐3‐(1‐pyrrolin‐2‐yl)pyridine) was synthesized for autoradiography studies starting from [carboxyl‐¹⁴C]‐nicotinic acid by initial esterification of the latter in the presence of 1,1,1‐triethoxyethane. Without any purification the ethyl nicotinate formed was directly reacted with N‐vinyl‐2‐pyrrolidinone in the presence of sodium hydride, yielding ¹⁴C‐labelled myosmine. The product was purified by silica gel column chromatography. The radiochemical yield was 15% and the specific activity 55.2 mCi/mmol. Copyright © 2003 John Wiley & Sons, Ltd.