Synthesis and stability of S‐(2‐[18F]fluoroethyl)‐L‐homocysteine for potential tumour imaging

The F‐18 labelled methionine derivative S‐(2‐[¹⁸F]fluoroethyl)‐L‐homocysteine ([¹⁸F]FEHCys) was prepared by a one‐pot two‐step synthesis via the protected S‐(2‐bromoethyl)‐L‐homocysteine 1 and S‐(2‐chloroethyl)‐L‐homocysteine 2 precursors. The bromoethyl derivative 1 gave higher radiochemical yields (40% at 5 min) at 100°C compared with the chloro‐analogue (22% at 100°C in 30 min). However, [¹⁸F]FEHCys was found to be unstable in aqueous systems being transformed to the corresponding hydroxyl derivative within 20 min. Copyright © 2008 John Wiley & Sons, Ltd.     

Automated production at the curie level of no‐carrier‐added 6‐[18F]fluoro‐ l‐dopa and 2‐[18F]fluoro‐ l‐tyrosine on a FASTlab synthesizer

An efficient, fully automated, enantioselective multi‐step synthesis of no‐carrier‐added (nca) 6‐[¹⁸F]fluoro‐L‐dopa ([¹⁸F]FDOPA) and 2‐[¹⁸F]fluoro‐L‐tyrosine ([¹⁸F]FTYR) on a GE FASTlab synthesizer in conjunction with an additional high‐ performance liquid chromatography (HPLC) purification has been developed. A PTC (phase‐transfer catalyst) strategy was used to synthesize these two important radiopharmaceuticals. According to recent chemistry improvements, automation of the whole process was implemented in a commercially available GE FASTlab module, with slight hardware modification using single use cassettes and stand‐alone HPLC. [¹⁸F]FDOPA and [¹⁸F]FTYR were produced in 36.3 ± 3.0 % (n = 8) and 50.5 ± 2.7 % (n = 10) FASTlab radiochemical yield (decay corrected). The automated radiosynthesis on the FASTlab module requires about 52 min. Total synthesis time including HPLC purification and formulation was about 62 min. Enantiomeric excesses for these two aromatic amino acids were always >95 %, and the specific activity of was >740 GBq/µmol. This automated synthesis provides high amount of [¹⁸F]FDOPA and [¹⁸F]FTYR (>37 GBq end of synthesis (EOS)). The process, fully adaptable for reliable production across multiple PET sites, could be readily implemented into a clinical good manufacturing process (GMP) environment.     

Synthesis of a phenolic precursor and its efficient O‐[18F]fluoroethylation with purified no‐carrier‐added [18F]2‐fluoroethyl brosylate as the labeling agent

[¹⁸F]2‐Fluoroethyl‐p‐toluenesulfonate also called [¹⁸F]2‐fluoroethyl tosylate has been widely used for labeling radioligands for positron emission tomography (PET). [¹⁸F]2‐Fluoroethyl‐4‐bromobenzenesulfonate, also called [¹⁸F]2‐fluoroethyl brosylate ([¹⁸F]F(CH₂)₂OBs), was used as an alternative radiolabeling agent to prepare [¹⁸F]FEOHOMADAM, a fluoroethoxy derivative of HOMADAM, by O‐fluoroethylating the phenolic precursor. Purified by reverse‐phase HPLC, the no‐carrier‐added [¹⁸F]F(CH₂)₂OBs was obtained in an average radiochemical yield (RCY) of 35%. The reaction of the purified and dried [¹⁸F]F(CH₂)₂OBs with the phenolic precursor was performed by heating in DMF and successfully produced [¹⁸F]FEOHOMADAM, after HPLC purification, in RCY of 21%. Copyright © 2013 John Wiley & Sons, Ltd.     

Automated synthesis of N‐(2‐[18F]Fluoropropionyl)‐l‐glutamic acid as an amino acid tracer for tumor imaging on a modified [18F]FDG synthesis module

N‐(2‐[¹⁸F]Fluoropropionyl)‐l ‐glutamic acid ([¹⁸F]FPGLU) is a potential amino acid tracer for tumor imaging with positron emission tomography. However, due to the complicated multistep synthesis, the routine production of [¹⁸F]FPGLU presents many challenging laboratory requirements. To simplify the synthesis process of this interesting radiopharmaceutical, an efficient automated synthesis of [¹⁸F]FPGLU was performed on a modified commercial fluorodeoxyglucose synthesizer via a 2‐step on‐column hydrolysis procedure, including ¹⁸F‐fluorination and on‐column hydrolysis reaction. [¹⁸F]FPGLU was synthesized in 12 ± 2% (n = 10, uncorrected) radiochemical yield based on [¹⁸F]fluoride using the tosylated precursor 2 . The radiochemical purity was ≥98%, and the overall synthesis time was 35 minutes. To further optimize the radiosynthesis conditions of [¹⁸F]FPGLU, a brominated precursor 3 was also used for the preparation of [¹⁸F]FPGLU, and the improved radiochemical yield was up to 20 ± 3% (n  = 10, uncorrected) in 35 minutes. Moreover, all these results were achieved using the similar on‐column hydrolysis procedure on the modified fluorodeoxyglucose synthesis module.     

Application of n.c.a. 4‐[18F]fluorophenol in diaryl ether syntheses of 2‐(4‐[18F]fluorophenoxy)‐benzylamines

The availability of no‐carrier‐added (n.c.a.) 4‐[¹⁸F]fluorophenol offers the possibility of introducing the 4‐[¹⁸F]fluorophenoxy moiety into potential radiopharmaceuticals. Besides alkyl–aryl ether synthesis using n.c.a. 4‐[¹⁸F]fluorophenol the diaryl ether coupling is an attractive synthetic method to enlarge the spectrum of interesting labelling procedures. As examples the syntheses of n.c.a. 2‐(4‐[¹⁸F]fluorophenoxy)‐N,N‐dimethylbenzylamine and n.c.a. 2‐(4‐[¹⁸F]fluorophenoxy)‐N‐methylbenzylamine were realized by an Ullmann ether synthesis of corresponding 2‐bromobenzoic acid amides using tetrakis(acetonitrile)copper(I) hexafluorophosphate as catalyst and a subsequent reduction of the amides formed. The radiochemical yield of the coupling varied between 5 and 65% based on labelled 4‐[¹⁸F]fluorophenol. Both compounds are structural analogues of recently published radiotracers for imaging the serotonin reuptake transporter sites (SERT). However, in vitro binding assays of both molecules showed only a low affinity towards monoamine transporters. Copyright © 2004 John Wiley & Sons, Ltd.     

An improved radiosynthesis of O‐(2‐[18F]fluoroethyl)‐O‐(p‐nitrophenyl)methylphosphonate: A first‐in‐class cholinesterase PET tracer

O‐(2‐Fluoroethyl)‐O‐(p‐nitrophenyl) methylphosphonate 1 is an organophosphate cholinesterase inhibitor that creates a phosphonyl‐serine covalent adduct at the enzyme active site blocking cholinesterase activity in vivo . The corresponding radiolabeled O‐(2‐[¹⁸F]fluoroethyl)‐O‐(p‐nitrophenyl) methylphosphonate, [ ¹⁸ F]1 , has been previously prepared and found to be an excellent positron emission tomography imaging tracer for assessment of cholinesterases in live brain, peripheral tissues, and blood. However, the previously reported [ ¹⁸ F]1 tracer synthesis was slow even with microwave acceleration, required high‐performance liquid chromatography separation of the tracer from impurities, and gave less optimal radiochemical yields. In this paper, we report a new synthetic approach to circumvent these shortcomings that is reliant on the facile reactivity of bis‐(O,O‐p‐nitrophenyl) methylphosphonate, 2 , with 2‐fluoroethanol in the presence of DBU. The cold synthesis was successfully translated to provide a more robust radiosynthesis. Using this new strategy, the desired tracer, [ ¹⁸ F]1 , was obtained in a non‐decay–corrected radiochemical yield of 8 ± 2% (n = 7) in >99% radiochemical and >95% chemical purity with a specific activity of 3174 ± 345 Ci/mmol (EOS). This new facile radiosynthesis routinely affords highly pure quantities of [ ¹⁸ F]1 , which will further enable tracer development of OP cholinesterase inhibitors and their evaluation in vivo .     

Alternative solvents for electrophilic synthesis of 6‐[18F]fluoro‐L‐DOPA

Owing to the ozone layer‐depleting properties of chlorofluorocarbon compounds, alternative solvents for electrophilic fluorination reactions are desirable. Chloroform, dichloromethane, acetone or their deuterated analogues were examined as substitutes for Freon‐11 in the electrophilic synthesis of 6‐[¹⁸F]fluoro‐L ‐DOPA ([¹⁸F]FDOPA). CDCl₃, CD₂Cl₂ and C₃D₆O were found to be suitable solvents in this reaction, with the deuterated solvents providing significantly higher yields than Freon‐11. There were no differences among the solvents in the specific radioactivity, the radiochemical purity, the chemical purity or the microbiological quality of the final product. However, the radiochemical yield of [¹⁸F]FDOPA was increased when acetic acid was added to the precursor solution prior to the fluorination reaction. Copyright © 2009 John Wiley & Sons, Ltd.     

Fully automated synthesis and purification of 4‐(2′‐methoxyphenyl)‐1‐[2′‐(N‐2″‐pyridinyl)‐p‐[18F]fluorobenzamido]ethylpiperazine

We have developed an efficient synthesis method for the rapid and high‐yield automated synthesis of 4‐(2′‐methoxyphenyl)‐1‐[2′‐(N‐2″‐pyridinyl)‐p‐[¹⁸F]fluorobenzamido]ethylpiperazine (p‐[¹⁸F]MPPF). No‐carrier‐added [¹⁸F]F^? was trapped on a small QMA cartridge and eluted with 70% MeCN(aq) (0.4 mL) containing Kryptofix 222 (2.3 mg) and K₂CO₃ (0.7 mg). The nucleophilic [¹⁸F]fluorination was performed with 3 mg of the nitro‐precursor in DMSO (0.4 mL) at 190 °C for 20 min, followed by the preparative HPLC purification (column: COSMOSIL Cholester, Nacalai Tesque, Kyoto, Japan; mobile phase: MeCN/25 mm AcONH₄/AcOH = 200/300/0.15; flow rate: 6.0 mL/min) to afford p‐[¹⁸F]MPPF (retention time = 9.5 min). p‐[¹⁸F]MPPF was obtained automatically with a radiochemical yield of 38.6 ± 5.0% (decay corrected, n = 5), a specific activity of 214.3 ± 21.1 GBq/µmol, and a radiochemical purity of >99% within a total synthesis time of about 55 min. Copyright © 2012 John Wiley & Sons, Ltd.     

Automated synthesis and purification of [18F]fluoro‐[di‐deutero]methyl tosylate

Automated synthetic procedures of [¹⁸F]fluoro‐[di‐deutero]methyl tosylate on a GE TRACERlab FX F‐N module and a non‐commercial synthesis module have been developed. The syntheses included azeotropic drying of the [¹⁸F]fluoride, nucleophilic ¹⁸F‐fluorination of bis(tosyloxy)‐[di‐deutero]methane, HPLC purification and subsequent formulation of the synthesized [¹⁸F]fluoro‐[di‐deutero]methyl tosylate (d₂‐[¹⁸F]FMT) in organic solvents. Automation shortened the total synthesis time to 50 min, resulting in an average radiochemical yield of about 50% and high radiochemical purity (>98%). The possible application of this procedure to commercially available synthesis modules might be of significance for the production of deuterated ¹⁸F‐fluoromethylated imaging probes in the future. Copyright © 2013 John Wiley & Sons, Ltd.     

A facile automated synthesis of N‐succinimidyl 4‐[18F]fluorobenzoate ([18F]SFB) for 18F‐labeled cell‐penetrating peptide as PET tracer

A fully automated synthesis of N‐succinimidyl 4‐[¹⁸F]fluorobenzoate ([¹⁸F]SFB) was carried out by a convenient three‐step, one‐pot procedure on the modified TRACERlab FX_FN synthesizer, including [¹⁸F]fluorination of ethyl 4‐(trimethylammonium triflate)benzoate as the precursor, saponification of the ethyl 4‐[¹⁸F]fluorobenzoate with aqueous tetrapropylammonium hydroxide instead of sodium hydroxide, and conversion of 4‐[¹⁸F]fluorobenzoate salt ([¹⁸F]FBA) to [¹⁸F]SFB treated with N,N,N′,N′‐tetramethyl‐O‐(N‐succinimidyl)uranium tetrafluoroborate (TSTU). The purified [¹⁸F]SFB was used for the labeling of Tat membrane‐penetrating peptide (containing the Arg‐Lys‐Lys‐Arg‐Arg‐Arg‐Arg‐Arg‐Arg‐Arg‐Arg‐Pro‐Leu‐Gly‐Leu‐Ala‐Gly‐Glu‐Glu‐Glu‐Glu‐Glu‐Glu‐Glu sequence, [¹⁸F]CPP) through radiofluorination of lysine amino groups. The uncorrected radiochemical yields of [¹⁸F]SFB were as high as 25–35% (based on [¹⁸F]fluoride) (n=10) with a synthesis time of～40 min. [¹⁸F]CPP was produced in an uncorrected radiochemical yields of 10–20% (n=5) within 30 min (based on [¹⁸F]SFB). The radiochemical purities of [¹⁸F]SFB and [¹⁸F]CPP were greater than 95%. Copyright © 2010 John Wiley & Sons, Ltd.     

Radiosynthesis of O‐[11C]methyl‐L‐tyrosine and O‐[18F]Fluoromethyl‐L‐tyrosine as potential PET tracers for imaging amino acid transport

Two positron‐emitting analogues of tyrosine, O‐[¹¹C]methyl‐L ‐tyrosine and O‐[¹⁸F]fluoromethyl‐L ‐tyrosine were prepared as new tumor imaging agents. The alkylating agent, [¹¹C]methyl triflate or [¹⁸F]fluoromethyl triflate, was simply bubbled through a dimethylsulfoxide solution of L ‐tyrosine disodium salt at room temperature. After subsequent HPLC purification the labeled L ‐tyrosine analogues were obtained in decay‐corrected radiochemical yields of over 50%, based on their corresponding labeling agent, with radiochemical purities always higher than 98%. The quite straightforward preparation, together with the high radiochemical yields achieved, make both these syntheses suitable for routine production. Copyright © 2003 John Wiley & Sons, Ltd.     

Radiosynthesis of 4‐[18F]fluoromethyl‐L‐phenylalanine and [18F]FET via a same strategy and automated synthesis module

Currently there is still a need for more potent amino acid analogues as tumour imaging agents for peripheral tumour imaging with PET as it was recently reported that the success of O‐(2′‐[¹⁸F]fluoroethyl)‐L ‐tyrosine ([¹⁸F]FET) is limited to brain, head and neck tumours. As the earlier described 2‐Amino‐3‐(2‐[¹⁸F]fluoromethyl‐phenyl)‐propionic acid (2‐[¹⁸F]FMP) suffered from intramolecular‐catalysed defluorination, we synthesized 2‐Amino‐3‐(4‐[¹⁸F]fluoromethyl‐phenyl)‐propionic acid (4‐[¹⁸F]FMP) as an alternative for tumour imaging with PET. Radiosynthesis of 4‐[¹⁸F]FMP, based on Br for [¹⁸F] aliphatic nucleophilic exchange, was performed with a customized modular Scintomics automatic synthesis hotbox^three system in a high overall yield of 30% and with a radiochemical purity of \gt 99%. 4‐[¹⁸F]FMP was found to be stable in its radiopharmaceutical formulation, even at high radioactivity concentrations. Additionally, for a comparative study, [¹⁸F]FET was synthesized using the same setup in 40% overall yield, with a radiochemical purity \gt 99%. The described automated radiosynthesis allows the production of two different amino acid analogues with minor alternations to the parameter settings of the automated system, rendering this unit versatile for both research and clinical practice. Copyright © 2009 John Wiley & Sons, Ltd.     

Radiosynthesis of 3‐(2′‐[18F]fluoro)‐flumazenil ([18F]FFMZ)

Recently, two fluorine‐18 labelled derivatives of flumazenil were described: 5‐(2′‐[¹⁸F]fluoroethyl)‐5‐desmethylflumazenil (ethyl 8‐fluoro‐5‐[¹⁸F]fluoroethyl‐6‐oxo‐5,6‐dihydro‐4H‐benzo‐[f]imidazo[1,5‐a] [1,4]diazepine‐3‐carboxylate; [¹⁸F]FEFMZ) and 3‐(2′‐[¹⁸F]fluoro)‐flumazenil (2′‐[¹⁸F]fluoroethyl 8‐fluoro‐5‐methyl‐6‐oxo‐5,6‐dihydro‐4H‐benzo‐[f]imidazo[1,5‐a]‐[1,4]diazepine‐3‐carbo‐ xylate; [¹⁸F]FFMZ). Since the biodistribution data of the latter were superior to those of the former we developed a synthetic approach for [¹⁸F]FFMZ starting from a commercially available precursor, thereby obviating the need to prepare a precursor by ourselves. The following two‐step procedure was developed: First, [¹⁸F]fluoride was reacted with 2‐bromoethyl triflate using the kryptofix/acetonitrile method to yield 2‐bromo‐[¹⁸F]fluoroethane ([¹⁸F]BFE). In the second step, distilled [¹⁸F]BFE was reacted with the tetrabutylammonium salt of 3‐desethylflumazenil (8‐fluoro‐5‐methyl‐6‐oxo‐5,6‐dihydro‐4H‐benzo‐[f]imidazo[1,5‐a] [1,4]diazepine‐3‐carboxylic acid) to yield [¹⁸F]FFMZ. The synthesis of [¹⁸F]FFMZ allows for the production of up to 7 GBq of this PET‐tracer, enough to serve several patients. [¹⁸F]FFMZ synthesis was completed in less than 80 min and the radiochemical purity exceeded 98%. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of 2‐[18F]fluoroadenosine (2‐[18F]FAD) as potential radiotracer for studying malignancies by PET

2‐[¹⁸F]fluoroadenosine (2‐[¹⁸F]FAD), a potential radioligand for assessment of adenylate metabolism, was synthesized by carrier‐added and no‐carrier‐added procedures via nucleophilic radiofluorination of 2‐fluoroadenosine and 2‐iodoadenosine. The radiochemical yield, specific radioactivity and radiochemical purity of carrier‐added and no‐carrier‐added 2‐[¹⁸F]FAD were 5%, 22–30 mCi/µmol and 99%, and 0.5%, 1200–1700 mCi/µmol and 99%, respectively. Copyright © 2006 John Wiley & Sons, Ltd.     

Simplified synthesis of N‐(3‐[18F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐fluorophenyl)nortropane ([18F]β‐CFT‐FP) using [18F]fluoropropyl tosylate as the labelling reagent

A synthesis method has been developed for the labelling of N‐(3‐[¹⁸F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐fluorophenyl)nortropane ([¹⁸F]β‐CFT‐FP), a potential radioligand for visualization of the dopamine transporters by positron emission tomography. The two‐step synthesis includes preparation of [¹⁸F]fluoropropyl tosylate and its use without purification in the fluoroalkylation of 2β‐carbomethoxy‐3β‐(4‐fluorophenyl)nortropane (nor‐β‐CFT). The final product is purified by HPLC. Optimization of the two synthesis steps resulted in a greater than 30% radiochemical yield of [¹⁸F]β‐CFT‐FP (decay corrected to end of bombardment). The synthesis time including HPLC‐purification was approximately 90 min. The radiochemical purity of the final product was higher than 99% and the specific radioactivity at the end of synthesis was typically 20 GBq/µmol. In comparison to alkylation by [¹⁸F]fluoropropyl bromide, the procedure described here results in an improved overall radiochemical yield of [¹⁸F]β‐CFT‐FP in a shorter time. Copyright © 2005 John Wiley & Sons, Ltd.     

Facile synthesis of 2‐deoxy‐2‐[18F]fluorosorbitol using sodium borohydride on aluminum oxide

2‐Deoxy‐2‐[¹⁸F]fluorosorbitol (¹⁸F‐FDS) has become increasingly useful in functional renal imaging. FDS is synthesized by the one‐step reduction of 2‐deoxy‐2‐[¹⁸F]fluoroglucose (¹⁸F‐FDG). To develop a more simple and rapid procedure for ¹⁸F‐FDS synthesis, we examined reduction reactions with solid‐supported NaBH₄. Synthetic yields using BH₄–IRA400 (polymer‐based matrix) and NaBH₄–Al₂O₃ (clay‐based matrix) as solid‐supported reagents were compared. NaBH₄–Al₂O₃ was found to be far superior to BH₄–IRA400 in the FDG reduction reaction. IRA 400 was not suitable for this reaction because it adsorbs FDG, in addition to glucose, with no FDS synthesized when using BH₄–IRA400. By contrast, NaBH₄–Al₂O₃ only required a filtration as workup, affording FDS in 90% yield after a total of 10 min. NaBH₄ on alumina was readily consumed in the reaction within 1 min, regardless of the amount used, by simply stirring with a vortex mixer. Complicated procedures, such as microwave irradiation, were not necessary. This simple operation will allow kit formulation and is suitable for radiosynthesis. In conclusion, clay‐supported reagents showed low absorption and were time saving, which are highly compatible with ¹⁸F‐FDS synthesis.     

18F‐labelling of a potent nonpeptide CCR1 antagonist: synthesis of 1‐(5‐chloro‐2‐{2‐[(2R)‐4‐(4‐[18F]fluorobenzyl)‐2‐methylpiperazin‐1‐yl]‐2‐oxoethoxy}phenyl)urea in an automated module

The synthesis of 1‐(5‐chloro‐2‐{2‐[(2R)‐4‐(4‐[¹⁸F]fluorobenzyl)‐2‐methylpiperazin‐1‐yl]‐2‐oxoethoxy}phenyl)urea ( [¹⁸F]4 ), a potent nonpeptide CCR1 antagonist, is described as a module‐assisted two‐step one‐pot procedure. The final product was obtained utilizing the reductive amination of the formed 4‐[¹⁸F]fluorobenzaldehyde ( 2 ) with a piperazine derivative 3 and sodium cyanoborohydride. After HPLC purification of the final product [¹⁸F]4 , its solid phase extraction, formulation and sterile filtration, the isolated (not decay‐corrected) radiochemical yields of [¹⁸F]4 were between 7 and 13% (n=28). The time of the entire manufacturing process did not exceed 95 min. The radiochemical purity of [¹⁸F]4 was higher than 95%, the chemical purity ?60% and the enantiomeric purity >99.5%. The specific radioactivity was in the range of 59–226 GBq/µmol at starting radioactivities of 23.6–65.0 GBq [¹⁸F]fluoride. Copyright © 2006 John Wiley & Sons, Ltd.     

Hydroacylation of 4‐[18F]fluorobenzaldehyde: a novel method for the preparation of 4′‐[18F]phenylketones

To assess the potential of intermolecular hydroacylation reactions as a new fluorine‐18 labeling method, model reactions of [¹⁸F]fluorobenzaldehyde with three different olefins (1‐hexene ( 2a ), allylbenzene ( 2b ), and 3‐phenoxypropene ( 2c )) in the presence of Wilkinson's catalyst were performed. The procedure gave high radiochemical yields (38–62%) of [¹⁸F]fluorophenylketones with short reaction times (15 min). The intermolecular hydroacylation reaction provides a new method for the preparation of fluorine‐18 labeled compounds. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of N‐(3‐[18F]Fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐iodophenyl)nortropane ([18F]FP‐β‐CIT)

N‐(3‐[¹⁸F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐iodophenyl)nortropane ([¹⁸F]FP‐β‐CIT) was synthesized in a two‐step reaction sequence. In the first reaction, 1‐bromo‐3‐(nitrobenzene‐4‐sulfonyloxy)‐propane was fluorinated with no‐carrier‐added fluorine‐18. The resulting product, 1‐bromo‐3‐[¹⁸F]‐fluoropropane, was distilled into a cooled reaction vessel containing 2β‐carbomethoxy‐3β‐(4‐iodophenyl)‐nortropane, diisopropylethylamine and potassium iodide. After 30 min, the reaction mixture was subjected to a preparative HPLC purification. The product, [¹⁸F]FP‐β‐CIT, was isolated from the HPLC eluent with solid‐phase extraction and formulated to yield an isotonic, pyrogen‐free and sterile solution of [¹⁸F]FP‐β‐CIT. The overall decay‐corrected radiochemical yield was 25 ± 5%. Radiochemical purity was > 98% and the specific activity was 94 ± 50 GBq/µmol at the end of synthesis. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of [18F]fluoroacetaldehyde. Application to [18F]fluoroethylation of benzylamine under reductive alkylation conditions

The radiosynthesis of a new [¹⁸F]fluoroalkylating agent, [¹⁸F]fluoroacetaldehyde, is described. It was produced using the Kornblum method by oxidation with dimethyl sulphoxide of 2‐[¹⁸F]fluoroethyl p‐toluenesulphonate ([¹⁸F]FETos). In these conditions the oxidation proceeds smoothly and rapidly to the selective conversion of tosyl esters of primary alcohols to aldehydes with no carboxylic acids being produced. The chemical identity of [¹⁸F]fluoroacetaldehyde was determined by comparing its chromatographic properties as well as those of its 2,4‐dinitrophenylhydrazone (2,4‐DNPH) derivative with those of, respectively, the standard fluoroacetaldehyde and its 2,4‐DNPH derivative. Standard fluoroacetaldehyde was prepared by oxidation of fluoroethanol with pyridinium dichromate and characterized as its 2,4‐DNPH derivative by mass spectrometry. To test its reactivity with amines under reductive alkylation conditions, [¹⁸F]fluoroacetaldehyde was reacted with benzylamine used as model substrate. The chemical identity of the resulting radiolabelled product was determined to be [¹⁸F]N‐(2‐fluoroethyl)‐benzylamine by comparing its chromatographic properties with those of the synthesized standard N‐(2‐fluoroethyl)‐benzylamine characterized by ¹⁹F and ¹H NMR spectroscopy and mass spectrometry. This new fluorine‐18 labelled synthon may find applications in radiolabelling peptide, protein and antibody fragments as well as in aldol condensation or in the Mannich reaction. Copyright © 2008 John Wiley & Sons, Ltd.