Racemization during peptide coupling with N,N'-bis(2-oxo-3-oxazolidinyl) phosphinic chloride (BOP-Cl)

The extent of racemization under various circumstances is reported for the coupling of the N-protected model dipeptide Z-Gly-Phe to Val-OMe, mediated by N,N'-bis(2-oxo-3-oxazolidinyl)phosphinic chloride (BOC-Cl). BOP-Cl can be used for peptide syntheses either in a one-pot reaction or with preactivation. Maximum yields are obtained with 1.2 equiv. BOP-Cl and 1.2–1.5 equiv. amino-nucleophile and 2.2 equiv. mediatorial base in tetrahydrofuran, but the amount of stereomutation is only tolerable with the use of suppressors (4–6%). BOP-Cl/ HOBt (88% yield, 0% racemization) and BOP-Cl/imidazole (96% yield, 1.6% racemization) are the best choices in apolar solvents and HOBt is to be preferred in DMF (89% yield, 2.4% racemization). Most other additives, HOSu, NP, Pfp, ZnCl₂, DMAP, etc., are not good suppressors.     

A novel five‐lipoxygenase activity protein inhibitor labeled with carbon‐14 and deuterium

2‐[4‐(3‐{(1R)‐1‐[4‐(2‐Aminopyrimidin‐5‐yl)phenyl]‐1‐cyclopropylethyl}‐1,2,4‐oxadiazol‐5‐yl)‐1H‐pyrazol‐1‐yl]‐N,N‐dimethylacetamide (1), is a novel and selective five‐lipoxygenase activity protein (FLAP) inhibitor with excellent pharmacokinetics properties. The availability of a key chiral intermediate allowed the synthesis of [¹⁴C]‐(1) in six radiochemical steps and in 47% overall radiochemical yield with a specific activity of 51 mCi/mmol using carbon‐14 zinc cyanide. 2‐Chloro‐N,N‐dimethyl‐²H₆‐acetamide was prepared and condensed with a penultimate intermediate to give [²H₆]‐(1) in very high yield and in more than 99% isotopic enrichment.     

Large‐scale synthesis of no‐carrier‐added [123I]mIBG,using two different stannylated precursors

The clinical advantages of no‐carrier‐added (n.c.a) radioiodinated meta‐iodobenzylguanidine ([*I]mIBG) over its carrier‐added (c.a.) analogue have previously been reported. A large‐scale synthesis of n.c.a. [¹²³I]mIBG was therefore investigated in this study, using a slightly adapted literature method. Two bis (t‐butyloxycarbonyl)‐protected (bis‐Boc) stannylated benzylguanidine precursors were prepared. The bis‐Boc‐trimethylstannyl precursor was used to optimize radioiodination conditions. N‐chlorosuccinimide (NCS) was used as oxidant. An HPLC method was developed to monitor radioiodination and de‐protection steps. Amounts of 200 g precursor and 2000 g NCS resulted in HPLC yields of Boc‐protected radioiodinated compounds in excess of 90%. De‐protection was carried out with trifluoroacetic acid at 110°C. A robust solid phase extraction method was developed to purify reaction mixtures. Radiochemical yields at radioactivity levels ranging between 1900 and 3280 MBq were 85±2.2% (n=4). A twice scaled up reaction at 5340 MBq gave a similar yield. Radiochemical purities were in excess of 98% and the specific activity estimated at approximately 1 TBq.µmol^?1. Yields obtained from an HPLC‐purified bis‐Boc‐tributylstannyl precursor were generally lower and ranged from 61 to 81%. Results obtained in this study suggest that n.c.a [¹²³I]mIBG could be synthesized on a GBq scale. Copyright © 2009 John Wiley & Sons, Ltd.     

Facile synthesis of Nα‐protected‐l‐α,γ‐diaminobutyric acids mediated by polymer‐supported hypervalent iodine reagent in water

Abstract: Hofmann rearrangement of N^α‐Boc‐l ‐Gln‐OH mediated by a polymer‐supported hypervalent iodine reagent poly[(4‐diacetoxyiodo)styrene] (PSDIB) in water afforded N^α‐Boc‐l ‐α,γ‐diaminobutyric acid (Boc‐Dab‐OH, 1 ) in 87% yield. N^α‐Z‐derivative (Z‐Dab‐OH, 2 ) was prepared with PSDIB in 83% yield. Since the reaction of N^α‐Fmoc‐Gln‐OH by this procedure did not proceed because of the insolubility of Fmoc‐Gln‐OH in aqueous media, we synthesized Fmoc‐Dab(Boc)‐OH ( 5 ) from 2 in 54% yield. Polymyxin B heptapeptide (PMBH) which contains four Dab residues was successfully synthesized in a solution‐phase synthesis.     

N‐Arylation of indoles with 4‐[18F]fluoroiodobenzene: synthesis of 18F‐labelled σ2 receptor ligands for positron emission tomography (PET)

The palladium‐mediated N‐arylation of indoles with 4‐[¹⁸F]fluoroiodobenzene as a novel radiolabelling method has been developed. Optimized reaction conditions were elaborated by variation of different catalyst systems (CuI/1,2‐diamines and Pd₂(dba)₃/phosphine ligands), bases and solvents in the reaction of indole with 4‐[¹⁸F]fluoroiodobenzene. Optimized reaction conditions (Pd₂(dba)₃/(2‐(dicyclohexyl‐phosphino)‐2′‐(N,N‐dimethylamino)‐biphenyl, NaOBu^t, toluene, 100°C for 20 min) were applied for the synthesis of ¹⁸F‐labelled σ₂ receptor ligands [¹⁸F]‐11 and [¹⁸F]‐13 which were obtained in 91 and 84% radiochemical yields, respectively. Copyright © 2004 John Wiley & Sons, Ltd.     

Comparison of synthesis yields of 3′‐deoxy‐3′‐[18F]fluorothymidine by nucleophilic fluorination in various alcohol solvents

[¹⁸F]Fluorothymidine ([¹⁸F]FLT) is synthesized with a high radiochemical yield by nucleophilic substitution in protic solvent. In this study, we compared [¹⁸F]fluorination yields of [¹⁸F]fluorothymidine ([¹⁸F]FLT) in various alcohol solvents: 3,3‐dimethyl‐1‐butanol, 2‐trifluoromethyl‐2‐propanol, t‐BuOH (2‐methyl‐2‐propanol), t‐amyl alcohol (2‐methyl‐2‐butanol), thexyl alcohol (2,3‐dimethyl‐2‐butanol) and 3,3‐dimethyl‐2‐butanol. We used 5′‐O‐DMTr‐2′‐deoxy‐3′‐O‐nosyl‐β‐D‐threopentofuranosyl)‐3‐N‐BOC‐thymine as a precursor for [¹⁸F]fluorination. [¹⁸F]F^? was eluted with TBAHCO₃ solution after trapping [¹⁸F]F^? on a PS‐HCO₃ cartridge. [¹⁸F]fluorination was performed at 100°C for 5–30 min using 20 mg of the precursor. [¹⁸F]fluorination and radiochemical yields of [¹⁸F]FLT were evaluated by radioTLC. [¹⁸F]fluorination yields were dependent on the solvent used. All tertiary alcohol solvents, except 2‐trifluoromethyl‐2‐propanol, showed >85% of [¹⁸F]fluorination yields, whereas primary and secondary alcohols showed 26.3–71.8%. The highest yield of 94.1±4.4% was obtained with thexyl alcohol after [¹⁸F]fluorination for 5 min. Automated synthesis with t‐amyl alcohol resulted in high synthetic yields of 64.6±6.1% after high‐performance liquid chromatography purification (n=43). The use of tertiary alcohol as a solvent provides high radiochemical yields of [¹⁸F]FLT. Copyright © 2008 John Wiley & Sons, Ltd.     

盐酸绿卡色林的工艺研究

目的 研究减肥药盐酸绿卡色林（1）的合成工艺。方法 以N-烯丙基-N-[2-（4-氯苯基）乙基]氨基甲酸叔丁酯（3）为原料,经一步反应同时实现分子内的傅-克烷基化反应和脱Boc保护基反应,再经L-（+）-酒石酸手性拆分和成盐制备得到1。结果 合成工艺总收率为24.7%,化学纯度为99.9%,光学纯度ee值>99.8%。各中间体和目标产物经¹H NMR、¹³C NMR、ESI-MS表征。结论 所研制的合成工艺路线操作简便、经济实用,适合工业化生产。     

Fast and efficient peptide bond formation using bis‐[α,α‐bis(trifluoromethyl)‐benzyloxy]diphenylsulfur. Part I

Abstract: This study towards the development of sulfurane‐based coupling agents shows that bis‐[α,α‐bis(trifluoromethyl)‐benzyloxy]diphenylsulfur (BTBDS) can facilitate rapid amide bond formation between N^α‐urethane‐protected l ‐amino acids and l ‐phenylalanine ethyl ester in the absence of an external base. The corresponding dipeptide esters were obtained in excellent yields and with no detectable racemization, as judged by analysis of the formed dipeptides by chiral‐phase HPLC. In addition, BTBDS‐mediated condensation of benzoyl‐l ‐phenylalanine with l ‐phenylalanine ethyl ester was also investigated. The results indicate that sulfuranes can be useful for application in racemization‐sensitive systems, such as segment condensation.     

Syntheses of [2H3, 15N], [14C]Nexavar™ and its labeled metabolites

Nexavar?, Sorafenib tosylate (BAY 43‐9006 tosylate) is a potent small molecule Raf kinase inhibitor for the treatment of hyperproliferative disorders such as cancer. Both radiolabeled and stable isotope labeled compounds were required for drug absorption, distribution, metabolism and excretion (ADME) and quantitative mass spectrometry bio‐analytical studies. Nexavar? labeled with carbon‐14 in the carboxamide group was prepared in two steps in an overall radiochemical yield of 42% starting from 4‐chloro‐N‐methyl‐2‐pyridine‐[¹⁴C]carboxamide. The [²H₃,¹⁵N] version of Nexavar? was prepared in 75% yield based on 4‐chloro‐N‐[²H₃]methyl‐2‐pyridine‐[¹⁵N]carboxamide. The pyridine N‐oxide metabolite labeled with carbon‐14 as well as with deuterium and nitrogen‐15 and was synthesized by oxidation in yields of 59% and 87%, respectively. Starting from [²H₂, ¹³C]formaldehyde the N‐hydroxymethyl metabolite was labeled with carbon‐13 and deuterium in one step in a 45% overall yield. Copyright © 2006 John Wiley & Sons, Ltd.     

An acid-labile anchoring linkage for solid-phase synthesis of C-terminal peptide amides under mild conditions*

A series of polymer-supported benzylamides substituted with one to three alkoxy groups in the ring positions were prepared and shown to give carboxamides upon treatment with acid. Based on the initial screening, the bis(o-methoxy)-p-alkoxybenzylamide anchoring linkage was selected for a detailed evaluation of its suitability for solid-phase synthesis of C-terminal peptide amides. The handle derivative 5-[(2′ or 4′)-Fmoc-aminomethyl-3′,5′-dimethoxyphenoxy]valeric acid ( 1 ) was prepared in seven facile steps [purification of intermediates unnecessary; overall yield 15% for crystalline product, which is a mixture of positional isomers], and was quantitatively coupled onto amino group-containing supports by use of N,N'-dicyclohexylcarbodiimide plus 1-hydroxybenzotriazole in N,N-dimethylformamide. Stepwise elaboration of peptide chains proceeded smoothly with both N^α-9-fluorenyl-methyloxycarbonyl (Fmoc) and N^α-dithiasuccinoyl (Dts) amino acids, and final cleavage of tert.-butyl side-chain protecting groups and of the anchoring linkage occurred readily in trifluoroacetic acid–dichloromethane (7:3) at 25°. The methodology was demonstrated by the syntheses of H-Trp-Asp-Met-Phe-NH₂ (tetragastrin) and H-Tyr-Gly-Gly-Phe-Met-NH₂ (methionine-enkephalinamide), both with high yields and purities.     

Synthesis of highly potent lymphocyte function‐associated antigen‐1 antagonists labeled with carbon‐14 and with stable isotopes,part 3

The drug candidates ( 2 ) and ( 3 ) are highly potent LFA‐1 inhibitors. They were efficiently prepared labeled with carbon‐14 using a palladium‐catalyzed carboxylation of an iodo‐precursor ( 5 ) and sodium formate‐¹⁴C to afford acid [¹⁴C]‐( 6 ), which was coupled via an amide bond to chiral amines ( 7 ) and ( 8 ) in 52% and 48% overall yield, respectively, and with specific activities higher than 56 mCi/mmol and radiochemical purities of 99%. For stable isotopes synthesis, the amine [²H₈]‐( 7 ) was synthesized in three steps from 2‐cyanopyridine‐²H₄ using Kulinkovich‐Szymonik aminocyclopropanation, followed by coupling to L ‐alanine‐2,3,3,3‐²H₄‐N‐t‐BOC, and then removal of the BOC‐protecting group. Amide bond formation with acid ( 6 ) gave [²H₈]‐( 2 ) in 36% overall yield. The amine [¹³C₄,¹⁵N]‐( 8 ) was obtained in two steps using L‐threonine‐¹⁴C₄,¹⁵N and then coupled to acid [¹³C]‐( 6 ) to give [¹³C₅,¹⁵N]‐( 3 ) in 56% overall yield.     

A novel asymmetric synthesis of tritium and carbon‐14 labeled (R)‐ibuprofen

An efficient asymmetric synthesis of tritium and carbon‐14 labeled R‐ibuprofen was achieved in good overall yield (15% and 47%, respectively) and excellent enantiomerical excess (>98% e.e.), using (4R, 5S)‐4‐methyl‐5‐phenyl‐2‐oxazolidinone as a chiral auxiliary. Copyright © 2006 John Wiley & Sons, Ltd.     

(R)‐N‐Methyl‐3‐(3′‐[18F]fluoropropyl)phenoxy)‐3‐phenylpropanamine (18F‐MFP3) as a potential PET imaging agent for norepinephrine transporter

A decline of norepinephrine transporter (NET) level is associated with several psychiatric and neurological disorders. Therefore positron emission tomography (PET) imaging agents are greatly desired to study the NET pathway. We have developed a C‐fluoropropyl analog of nisoxetine: (R)‐N‐methyl‐3‐(3′‐[¹⁸F]fluoropropyl)phenoxy)‐3‐phenylpropanamine (¹⁸F‐MFP3) as a new potential PET radiotracer for NET with the advantage of the longer half‐life of fluorine‐18 (110 min compared with carbon‐11 (20 min). Synthesis of (R)‐N‐methyl‐3‐(3′‐fluoropropyl)phenoxy)‐3‐phenylpropanamine (MFP3) was achieved in five steps starting from (S)‐N‐methyl‐3‐ol‐3‐phenylpropanamine in approx. 3–5% overall yields. In vitro binding affinity of nisoxetine and MFP3 in rat brain homogenates labeled with ³H‐nisoxetine gave Ki values of 8.02 nM and 23 nM, respectively. For radiosynthesis of ¹⁸F‐MFP3, fluorine‐18 was incorporated into a tosylate precursor, followed by the deprotection of the N‐BOC‐protected amine group with a 15% decay corrected yield in 2.5 h. Reverse‐phase chromatographic purification provided ¹⁸F‐MFP3 in specific activities of >2000 Ci/mmol. Fluorine‐18 labeled ¹⁸F‐MFP3 has been produced in modest radiochemical yields and in high specific activities. Evaluation of ¹⁸F‐MFP3 in animal imaging studies is in progress in order to validate this new fluorine‐18 radiotracer for PET imaging of NET. Copyright © 2010 John Wiley & Sons, Ltd.     

Radiosynthesis and bioconjugation of [18F]FPy5yne,a prosthetic group for the 18F labeling of bioactive peptides

A new ¹⁸F‐based prosthetic group has been prepared for the labeling of azide‐modified peptides for use in PET imaging. 2‐[¹⁸F]fluoro‐3‐(hex‐5‐ynyloxy)pyridine ([¹⁸F]FPy5yne, [¹⁸F]‐1) was prepared via efficient nucleophilic heteroaromatic substitution of either the corresponding 2‐nitro (2) or 2‐trimethylammonium trifluoromethanesulfonate pyridine (3). Best radiochemical yield of [¹⁸F]FPy5yne from 2 was 91% by radioTLC (15 min, 110°C, DMSO). From 3, best radiochemical yield by radioTLC was 93% (15 min, 110°C, MeCN). HPLC‐purified [¹⁸F]FPy5yne was ligated to model peptide N₃–(CH₂)₄–CO–YKRI–OH by way of Cu^I‐mediated Huisgen [3+2] cycloaddition in the presence of copper‐stabilizing ligand tris(benzyltriazolylmethyl)amine (TBTA) and N,N‐diisopropylethylamine (DIEA). Bioconjugate radiochemical yields were obtained in average yields of 89%±8.6% (n=4), as judged by radioHPLC. Best non‐decay‐corrected, collected radiochemical yield of modified peptide from end‐of‐bombardment was 5.8% (18.7% decay‐corrected), with a total preparation time of 160 min from start of synthesis. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of [3‐3H]20(S)‐protopanaxadiol

[3‐³H]20(S)‐Protopanaxadiol (PPD) was prepared via selective reduction of PPD dioxide with sodium borotritide in N,N‐dimethyl acetamide. A radiochemical yield of 22% was obtained. The radiochemical purity of the final product was 99% and the ratio of C‐3/C‐12 tritium labeling was 97:3. Copyright © 2009 John Wiley & Sons, Ltd.     

Improved method for the synthesis of Nα-9-fluorenylmethyloxycarbonyl-Nδ,ω bis-adamantyloxycarbonyl-L-arginine

A modified method is reported for the prepartion of N^α-9-fluorenylmethyloxycarbonyl-N^δ,ω bis-adamantyloxycarbonyl-L-arginine, giving an overall yield of 60% over three steps based on N^α-benzyloxycarbonyl-L-arginine. Commercially available adamantyl fluoroformate for guanidine function protection of N^α benzyloxycarbonyl-L-arginine, catalytic transfer hydrogenation with formic acid on palladium black for removal of the benzyloxycarbonyl protecting group, and fluorenylmethylsuccinimidyl carbonate for the final synthesis, were introduced to simplify and reduce the cost of preparation of this arginine derivative. The reaction conditions have been accurately studied at each step in order to optimize the yields.     

A convenient general method for synthesis of Nα- or Nω-dithiasuccinoyl (Dts) amino acids and dipeptides: application of polyethylene glycol as a carrier for functional purification*

N ^α-Dithiasuccinoyl (Dts) amino acids ( 1 ) needed for solid-phase peptide synthesis have been prepared in good yields and excellent purities by a new method that exploits the solubility properties of polyethylene glycol (PEG; bifunctional with average molecular weight 2000 was found to be optimal). Suitably side-chain protected amino acid derivatives are first reacted with a polymeric xanthate ( 11 ), following which the free α-carboxyl is blocked by silylation and the Dts heterocycle is elaborated in the same pot by reaction with chlorocarbonylsulfenyl chloride ( 4 ). Upon aqueous workup, the polymeric carrier removes any urethane blocked amino acids which arise during the process. Exaggerated conditions were explored to prove the power of this functional purification approach, and mechanisms of formation of polymer-bound urethanes are proposed and supported by solution model studies. The preparation and characterization of the companion N-(iso-propyldithio)carbonyl derivative of proline is also presented.     

An effective organic solvent system for the dissolution of amino acids

Dimethylformamide containing strong acids (CF₃ COOH, HBF₄. TosOH, etc.) and an excess of tertiary base with p^K≤6 is an effective solvent system for the dissolution of amino acids and their derivatives. The preferable base is pyridine, which forms a system with an apparent pH of 5.3. Amino acids dissolved in this solvent system readily interact with acylating reagents (BOC₂O, ZOSu, Fmoc-OSu and activated derivatives of N-protected amino acids). A number of BOC-, Z-, Fmoc-amino acids, as well as several dipeptides, were synthesized using this solvent system with 80-99%) yields. © Munksgaard 1996.     

Orthogonal solid-phase synthesis of human gastrin-I under mild conditions*

An approach to the solid-phase segment condensation synthesis of the 17-peptide amide human gastrin-I has been developed. N^α-amino and side-chain protection were provided by 9-fluorenylmethyloxycarbonyl (Fmoc) and tert.-butyl groups, and a series of anchors cleavable under mild conditions were used. The N-terminal pentapeptide pGlu-Gly-Pro-Trp-Leu-OH was prepared using a p-alkoxybenzyl ester linkage made by a preformed handle strategy. Cleavage, in 65% yield, was with the new Reagent M: CF₃ COOH—CH₂ Cl₂—β-mercaptoethanol-anisole (70:30:2:1), which was optimized to preserve the labile tryptophan residue. A new preformed handle procedure expedited solid-phase synthesis of the protected “middle” hexapeptide, Fmoc-(Glu(OtBu))₅-Ala-OH, anchored as an o-nitrobenzyl ester. Chains were not lost during this assembly, and final photolytic cleavage (350nm) in toluene—CF₃ CH₂ OH (4:1) occurred in 59% yield. Both protected intermediates were purified by simple gel filtration, whereupon they were shown to be pure by analytical HPLC, and gave satisfactory NMR and FABMS spectra. Last, the C-terminal hexapeptide, Tyr(tBu)-Gly-Trp-Met-Asp(OtBu)-Phe, was assembled on a tris(alkoxy)benzylamide “PAL” support. For the polymer-supported segment condensation, the middle and N-terminal pieces were added respectively in > 98% and 89% yields (judged by amino acid analysis and solid-phase sequencing), by overnight couplings in N,N-dimethylformamide (DMF) mediated by benzotriazolyl N-oxytrisdimethylaminophosphonium hexafluorophosphate (BOP) in the presence of 1-hydroxybenzotriazole (HOBt) and N-methylmorpholine (NMM). Racemization was 4% and 11% respectively at Ala and Leu. Cleavage with Reagent M followed by reversed-phase chromatography gave pure gastrin-I in an overall 30% isolated yield. These results compare favorably with those from a stepwise assembly.     

Thio-α-amino acids (S-acids) as a carboxyl component in peptide synthesis catalysed by papain

Peptide synthesis catalysed by papain was studied using thio-α-amino acids (S-acids) as a carboxyl component. It was found, for example, that with Z-AlaSH (pK 2.70) the maximal yield of the peptide Z-AlaValNH₂ was obtained at pH 8–8.5. A two-fold excess of Z-AlaSH furnished peptides with yields close to 100%. Thio-amino acids with bulky side groups, for example, Z-IleSH, Z-Asp(OBu^t)SH, gave peptides with a low yield. Papain interacts with Z-AlaSH better than do bromelain or ficin.