胶原海绵支架体外构建组织工程膀胱黏膜***◆

背景：组织工程膀胱黏膜层的构建在组织工程膀胱修复中占有重要的地位,但目前并没有最合理的构建方法。 目的：探讨胶原海绵支架复合猪膀胱尿路上皮细胞体外构建膀胱黏膜结构的可行性。 方法：刮取猪膀胱黏膜层后用酶消化方式进行猪膀胱尿路上皮细胞原代培养,并进行尿路上皮细胞标志物免疫荧光和RT-PCR鉴定。制备疏松多孔的胶原海绵支架材料,将第3代尿路上皮细胞接种在胶原海绵支架上,体外培养4~8 d后观察尿路上皮细胞和胶原海绵材料的复合情况。 结果与结论：原代培养的猪膀胱尿路上皮细胞呈“多角形”、“铺路石”样,以克隆团形式生长。免疫荧光鉴定AE1/AE3阳性,RT-RCR检测uroplakin-ⅠA、uroplakin-Ⅱ阳性。胶原海绵复合尿路上皮细胞体外培养4~8 d后,细胞在胶原海绵支架上生长良好,覆盖胶原材料的表面并长入材料内部,保持了尿路上皮细胞的特性。体外培养6 d时,尿路上皮细胞与胶原支架复合效果最好,同时细胞数量也最多。结果初步表明了胶原海绵复合膀胱尿路上皮细胞可以构建组织工程膀胱黏膜,且体外培养6 d为最佳时间点。     

Engineering vascularized soft tissue flaps in an animal model using human adipose–derived stem cells and VEGF+PLGA/PEG microspheres on a collagen-chitosan scaffold with a flow-through vascular pedicle

Insufficient neovascularization is associated with high levels of resorption and necrosis in autologous and engineered fat grafts. We tested the hypothesis that incorporating angiogenic growth factor into a scaffold–stem cell construct and implanting this construct around a vascular pedicle improves neovascularization and adipogenesis for engineering soft tissue flaps. Poly(lactic-co-glycolic-acid/polyethylene glycol (PLGA/PEG) microspheres containing vascular endothelial growth factor (VEGF) were impregnated into collagen-chitosan scaffolds seeded with human adipose-derived stem cells (hASCs). This setup was analyzed in vitro and then implanted into isolated chambers around a discrete vascular pedicle in nude rats. Engineered tissue samples within the chambers were harvested and analyzed for differences in vascularization and adipose tissue growth. In vitro testing showed that the collagen-chitosan scaffold provided a supportive environment for hASC integration and proliferation. PLGA/PEG microspheres with slow-release VEGF had no negative effect on cell survival in collagen-chitosan scaffolds. In vivo, the system resulted in a statistically significant increase in neovascularization that in turn led to a significant increase in adipose tissue persistence after 8 weeks versus control constructs. These data indicate that our model—hASCs integrated with a collagen-chitosan scaffold incorporated with VEGF-containing PLGA/PEG microspheres supported by a predominant vascular vessel inside a chamber—provides a promising, clinically translatable platform for engineering vascularized soft tissue flap. The engineered adipose tissue with a vascular pedicle could conceivably be transferred as a vascularized soft tissue pedicle flap or free flap to a recipient site for the repair of soft-tissue defects.     

The effect of mechanical stimulation on the maturation of TDSCs-poly(L-lactide-co-e-caprolactone)/collagen scaffold constructs for tendon tissue engineering

Mechanical stimulation plays an important role in the development and remodeling of tendons. Tendon-derived stem cells (TDSCs) are an attractive cell source for tendon injury and tendon tissue engineering. However, these cells have not yet been fully explored for tendon tissue engineering application, and there is also lack of understanding to the effect of mechanical stimulation on the maturation of TDSCs-scaffold construct for tendon tissue engineering. In this study, we assessed the efficacy of TDSCs in a poly(L-lactide-co-ε-caprolactone)/collagen (P(LLA-CL)/Col) scaffold under mechanical stimulation for tendon tissue engineering both in vitro and in vivo, and evaluated the utility of the transplanted TDSCs-scaffold construct to promote rabbit patellar tendon defect regeneration. TDSCs displayed good proliferation and positive expressed tendon-related extracellular matrix (ECM) genes and proteins under mechanical stimulation in vitro. After implanting into the nude mice, the fluorescence imaging indicated that TDSCs had long-term survival, and the macroscopic evaluation, histology and immunohistochemistry examinations showed high-quality neo-tendon formation under mechanical stimulation in vivo. Furthermore, the histology, immunohistochemistry, collagen content assay and biomechanical testing data indicated that dynamically cultured TDSCs-scaffold construct could significantly contributed to tendon regeneration in a rabbit patellar tendon window defect model. TDSCs have significant potential to be used as seeded cells in the development of tissue-engineered tendons, which can be successfully fabricated through seeding of TDSCs in a P(LLA-CL)/Col scaffold followed by mechanical stimulation.     

Biomaterials with persistent growth factor gradients in vivo accelerate vascularized tissue formation

Gradients of soluble factors play an important role in many biological processes, including blood vessel assembly. Gradients can be studied in detail in vitro, but methods that enable the study of spatially distributed soluble factors and multi-cellular processes in vivo are limited. Here, we report on a method for the generation of persistent in vivo gradients of growth factors in a three-dimensional (3D) biomaterial system. Fibrin loaded porous poly (ethylene glycol) (PEG) scaffolds were generated using a particulate leaching method. Platelet derived growth factor BB (PDGF-BB) was encapsulated into poly (lactic-co-glycolic acid) (PLGA) microspheres which were placed distal to the tissue–material interface. PLGA provides sustained release of PDGF-BB and its diffusion through the porous structure results in gradient formation. Gradients within the scaffold were confirmed in vivo using near-infrared fluorescence imaging and gradients were present for more than 3 weeks. The diffusion of PDGF-BB was modeled and verified with in vivo imaging findings. The depth of tissue invasion and density of blood vessels formed in response to the biomaterial increased with magnitude of the gradient. This biomaterial system allows for generation of sustained growth factor gradients for the study of tissue response to gradients in vivo.     

The impact of PLGA scaffold orientation on in vitro cartilage regeneration

The success of in vitro cartilage regeneration provides a promising approach for cartilage repair. However, the currently engineered cartilage in vitro is unsatisfactory for clinical application due to non-homogeneous structure, inadequate thickness, and poor mechanical property. It has been widely reported that orientation of scaffolds can promote cell migration and thus probably contributes to improving tissue regeneration. This study explored the impact of microtubular oriented scaffold on in vitro cartilage regeneration. Porcine articular chondrocytes were seeded into microtubule-oriented PLGA scaffolds and non-oriented scaffolds respectively. A long-term in vitro culture followed by a long-term in vivo implantation was performed to evaluate the influence of scaffold orientation on cartilage regeneration. The current results showed that the oriented scaffolds could efficiently promote cell migration towards the inner region of the constructs. After 12 weeks of in vitro culture, the chondrocyte-scaffold constructs in the oriented group formed thicker cartilage with more homogeneous structure, stronger mechanical property, and higher cartilage matrix content compared to the non-oriented group. Furthermore, the in vitro engineered cartilage based on oriented scaffolds showed better cartilage formation in terms of size, wet weight, and homogeneity after 12-week in vivo implantation in nude mice. These results indicated that the longitudinal microtubular orientation of scaffolds can efficiently improve the structure and function of in vitro engineered cartilage.     

Tissue engineering of cartilage using a hybrid scaffold of synthetic polymer and collagen

A biodegradable hybrid scaffold of synthetic polymer, poly (DL-lactic-co-glycolic acid) (PLGA), and naturally derived polymer, collagen, was prepared by forming collagen microsponges in the pores of PLGA sponge. This was then used as the three-dimensional scaffold for tissue engineering of bovine articular cartilage, both in vitro and in vivo. In vitro studies show that hybridization with collagen facilitated cell seeding in the sponge and raised seeding efficiency. Chondrocytes adhered to the collagen microsponges, where they proliferated and secreted extracellular matrices with time, filling the space within the sponge. Hematoxylin and eosin staining revealed that most of the chondrocytes after 4 weeks of culture, and almost all cell types after 6 weeks of culture, maintained their phenotypically rounded morphology. While new tissue formed, the scaffold degraded and lost almost 36.9% of its original weight after 10 weeks. Subcutaneous implantation studies in nude mice demonstrated more homogeneous tissue formation in hybrid sponge than in PLGA sponge. The new tissue formed maintained the original shape of the hybrid sponge. The synthetic PLGA sponge, serving as a skeleton, facilitated easy formation into desired shapes and provided appropriate mechanical strength to define the ultimate shape of engineered tissue. Incorporation of collagen microsponges facilitated cell seeding and homogeneous cell distribution and created a favorable environment for cellular differentiation. The hybrid sponge could therefore represent a promising candidate as a three-dimensional scaffold for articular cartilage tissue engineering.     

Multifunctional and stable bone mimic proteinaceous matrix for bone tissue engineering

Biomaterial surface design with biomimetic proteins holds great promise for successful regeneration of tissues including bone. Here we report a novel proteinaceous hybrid matrix mimicking bone extracellular matrix that has multifunctional capacity to promote stem cell adhesion and osteogenesis with excellent stability. Osteocalcin-fibronectin fusion protein holding collagen binding domain was networked with fibrillar collagen, featuring bone extracellular matrix mimic, to provide multifunctional and structurally-stable biomatrices. The hybrid protein, integrated homogeneously with collagen fibrillar networks, preserved structural stability over a month. Biological efficacy of the hybrid matrix was proven onto tethered surface of biopolymer porous scaffolds. Mesenchymal stem cells quickly anchored to the hybrid matrix, forming focal adhesions, and substantially conformed to cytoskeletal extensions, benefited from the fibronectin adhesive domains. Cells achieved high proliferative capacity to reach confluence rapidly and switched to a mature and osteogenic phenotype more effectively, resulting in greater osteogenic matrix syntheses and mineralization, driven by the engineered osteocalcin. The hybrid biomimetic matrix significantly improved in vivo bone formation in calvarial defects over 6 weeks. Based on the series of stimulated biological responses in vitro and in vivo the novel hybrid proteinaceous composition will be potentially useful as stem cell interfacing matrices for osteogenesis and bone regeneration.     

Induced pluripotent stem cell-derived hepatocytes and endothelial cells in multi-component hydrogel fibers for liver tissue engineering

Liver tissue engineering requires a suitable cell source, methodologies to assemble the cells within their niche microenvironments in a spatially defined manner, and vascularization of the construct in vivo for maintenance of hepatocyte viability and function. Recently, we have developed methods of encapsulating cells within separate domains in multi-component hydrogel fibers and methods of assembling fibers to form 3D-patterned tissue constructs. In the present work, we have combined these approaches to encapsulate hepatocytes and endothelial cells within their specific niches, and to assemble them into endothelialized liver tissue constructs. The hepatocytes and endothelial cells were obtained in parallel by differentiating human recombinant protein-induced human pluripotent stem cells, resulting in a construct which contained genetically identical endothelial and parenchymal elements. We were able to demonstrate that the presence of endothelial cells in the scaffold significantly improved hepatocyte function in vitro and facilitated vascularization of the scaffold when implanted in a mouse partial hepatectomy model. The in vivo studies further asserted that integration of the scaffold with host vasculature had occurred, as demonstrated by the presence of human albumin in the mouse serum.     

A porous tissue engineering scaffold selectively degraded by cell-generated reactive oxygen species

Biodegradable tissue engineering scaffolds are commonly fabricated from poly(lactide-co-glycolide) (PLGA) or similar polyesters that degrade by hydrolysis. PLGA hydrolysis generates acidic breakdown products that trigger an accelerated, autocatalytic degradation mechanism that can create mismatched rates of biomaterial breakdown and tissue formation. Reactive oxygen species (ROS) are key mediators of cell function in both health and disease, especially at sites of inflammation and tissue healing, and induction of inflammation and ROS are natural components of the in vivo response to biomaterial implantation. Thus, polymeric biomaterials that are selectively degraded by cell-generated ROS may have potential for creating tissue engineering scaffolds with better matched rates of tissue in-growth and cell-mediated scaffold biodegradation. To explore this approach, a series of poly(thioketal) (PTK) urethane (PTK-UR) biomaterial scaffolds were synthesized that degrade specifically by an ROS-dependent mechanism. PTK-UR scaffolds had significantly higher compressive moduli than analogous poly(ester urethane) (PEUR) scaffolds formed from hydrolytically-degradable ester-based diols (p < 0.05). Unlike PEUR scaffolds, the PTK-UR scaffolds were stable under aqueous conditions out to 25 weeks but were selectively degraded by ROS, indicating that their biodegradation would be exclusively cell-mediated. The in vitro oxidative degradation rates of the PTK-URs followed first-order degradation kinetics, were significantly dependent on PTK composition (p < 0.05), and correlated to ROS concentration. In subcutaneous rat wounds, PTK-UR scaffolds supported cellular infiltration and granulation tissue formation, followed first-order degradation kinetics over 7 weeks, and produced significantly greater stenting of subcutaneous wounds compared to PEUR scaffolds. These combined results indicate that ROS-degradable PTK-UR tissue engineering scaffolds have significant advantages over analogous polyester-based biomaterials and provide a robust, cell-degradable substrate for guiding new tissue formation.     

The enhancement of bone regeneration by gene activated matrix encoding for platelet derived growth factor

Gene therapy using non-viral vectors that are safe and efficient in transfecting target cells is an effective approach to overcome the shortcomings of protein delivery of growth factors. The objective of this study was to develop and test a non-viral gene delivery system for bone regeneration utilizing a collagen scaffold to deliver polyethylenimine (PEI)-plasmid DNA (pDNA) [encoding platelet derived growth factor-B (PDGF-B)] complexes. The PEI-pPDGF-B complexes were fabricated at amine (N) to phosphate (P) ratio of 10 and characterized for size, surface charge, and in vitro cytotoxicity and transfection efficacy in human bone marrow stromal cells (BMSCs). The influence of the complex-loaded collagen scaffold on cellular attachment and recruitment was evaluated in vitro using microscopy techniques. The in vivo regenerative capacity of the gene delivery system was assessed in 5 mm diameter critical-sized calvarial defects in Fisher 344 rats. The complexes were ∼100 nm in size with a positive surface charge. Complexes prepared at an N/P ratio of 10 displayed low cytotoxicity as assessed by a cell viability assay. Confocal microscopy revealed significant proliferation of BMSCs on complex-loaded collagen scaffolds compared to empty scaffolds. In vivo studies showed significantly higher new bone volume/total volume (BV/TV) % in calvarial defects treated with the complex-activated scaffolds following 4 weeks of implantation (14- and 44-fold higher) when compared to empty defects or empty scaffolds, respectively. Together, these findings suggest that non-viral PDGF-B gene-activated scaffolds are effective for bone regeneration and are an attractive gene delivery system with significant potential for clinical translation.     

Adenovirus-mediated transfer of VEGF into marrow stromal cells combined with PLGA/TCP scaffold increases vascularization and promotes bone repair in vivo

Introduction

Large osseous defect remains a serious clinical problem due to the lack of sufficient blood supply and it has been proposed that this situation can be relieved by accelerating the formation of new vessels in the process of bone defect repair. The aim of this study was to develop a new type of artificial bone by transferring the VEGF gene into marrow stromal cells (MSCs) and seeding them into a porous scaffold.

Material and methods

An adenovirus vector was employed to transfer the VEGF gene into MSCs and expression of the exogenous gene was confirmed by ELISA. Next the transduced cells were seeded into a collagen I modified PLGA/TCP scaffold. The constructed new complex artificial bone was then assessed for biocompatibility in vitro and blood vessel formation and bone formation in vivo.

Results

We found that adenovirus mediated VEGF gene transfer into MSCs sustained VEGF expression in MSCs for 3 weeks. Porous scaffold PLGA/TCP made by rapid prototyping technology exhibited improved biocompatibility resulting from crosslinking with collagen I. Furthermore, the in vivo study showed that large amounts of blood vessels were detected histologically 1 week after artificial bone implantation, and significant bone formation was detected 8 weeks after implantation.

Conclusions

Our findings suggest that gene transfer of VEGF into MSCs combined with PLGA/TCP scaffold enhances bone repair in vivo by promoting vascularization.     

Mesenchymal stem cells attenuated PLGA-induced inflammatory responses by inhibiting host DC maturation and function

The poly lactic-co-glycolic acid (PLGA) bio-scaffold is a biodegradable scaffold commonly used for tissue repair. However, implanted PLGA scaffolds usually cause serious inflammatory responses around grafts. To improve PLGA scaffold-based tissue repair, it is important to control the PLGA-mediated inflammatory responses. Recent evidence indicated that PLGA induce dendritic cell (DC) maturation in vitro, which may initiate host immune responses. In the present study, we explored the modulatory effects of mesenchymal stem cells (MSC) on PLGA-induced DCs (PLGA-DC). We found that mouse MSCs inhibited PLGA-DC dendrite formation, as well as co-stimulatory molecule and pro-inflammatory factor expression. Functionally, MSC-educated PLGA-DCs promoted Th2 and regulatory T cell differentiation but suppressed Th1 and Th17 cell differentiation. Mechanistically, we determined that PLGA elicited DC maturation via inducing phosphorylation of p38/MAPK and ERK/MAPK pathway proteins in DCs. Moreover, MSCs suppressed PLGA-DCs by partially inactivating those pathways. Most importantly, we found that the MSCs were capable of suppressing DC maturation and immune function in vivo. Also, the proportion of mature DCs in the mice that received MSC-PLGA constructs greatly decreased compared with that of their PLGA-film implantation counterparts. Additionally, MSCs co-delivery increased regulatory T and Th2 cells but decreased the Th1 and Th17 cell numbers in the host spleens. Histological analysis showed that MSCs alleviated the inflammatory responses around the grafted PLGA scaffolds. In summary, our findings reveal a novel function for MSCs in suppressing PLGA-induced host inflammatory response and suggest that DCs are a new cellular target in improving PLGA scaffold-based tissue repair.     

Patient-specific cardiovascular progenitor cells derived from integration-free induced pluripotent stem cells for vascular tissue regeneration

Tissue-engineered blood vessels (TEBVs) are promising in regenerating a live vascular replacement. However, the vascular cell source is limited, and it is crucial to develop a scaffold that accommodates new type of vascular progenitor cells and facilitates in vivo lineage specification of the cells into functional vascular smooth muscle cells (VSMCs) to regenerate vascular tissue. In the present study, integration-free human induced pluripotent stem cells (hiPSCs) were established from patient peripheral blood mononuclear cells through episomal vector nucleofection of reprogramming factors. The established hiPSCs were then induced into mesoderm-originated cardiovascular progenitor cells (CVPCs) with a highly efficient directed lineage specification method. The derived CVPCs were demonstrated to be able to differentiate into functional VSMCs. Subcutaneous implantation of CVPCs seeded on macroporous nanofibrous poly(l-lactide) scaffolds led to in vivo VSMC lineage specification and matrix deposition inside the scaffolds. In summary, we established integration-free patient-specific hiPSCs from peripheral blood mononuclear cells, derived CVPCs through directed lineage specification, and developed an advanced scaffold for these progenitor cells to further differentiate in vivo into VSMCs and regenerate vascular tissue in a subcutaneous implantation model. This study has established an efficient patient-specific approach towards in vivo regeneration of vascular tissue.     

The effect of simvastatin on chemotactic capability of SDF-1α and the promotion of bone regeneration

The purpose of this study was to investigate the cooperative effects of simvastatin (SIM) and stromal cell-derived factor-1α (SDF-1α) on the osteogenic and migration capabilities of mesenchymal stem cells (MSCs), and construct a cell-free bone tissue engineering system comprising SIM, SDF-1α and scaffold. We found that 0.2 μm SIM significantly increased alkaline phosphatase activity (P < 0.05) of mouse bone marrow MSCs with no inhibition of cell proliferation, and enhanced the chemotactic capability of SDF-1α (P < 0.05). Next, we constructed a novel cell-free bone tissue engineering system using PLGA loaded with SIM and SDF-1α, and applied it in critical-sized calvarial defects in mice. New bone formation in the defect was evaluated by micro-CT, HE staining and immunohistochemistry. The results showed that PLGA loaded with SIM and SDF-1α promoted bone regeneration significantly more than controls. We investigated possible mechanisms, and showed that SDF-1α combined with SIM increased MSC migration and homing in vivo, promoted angiogenesis and enhanced the expression of BMP-2 in newly-formed bone tissue. In conclusion, SIM enhanced the chemotactic capability of SDF-1α and the cell-free bone tissue engineering system composed of SIM, SDF-1α and scaffold promoted bone regeneration in mouse critical-sized calvarial defects.     

A functional biphasic biomaterial homing mesenchymal stem cells for in vivo cartilage regeneration

Cartilage regeneration after trauma is still a great challenge for clinicians and researchers due to many reasons, such as joint load-bearing, synovial movement and the paucity of endogenous repair cells. To overcome these limitations, we constructed a functional biomaterial using a biphasic scaffold platform and a bone-derived mesenchymal stem cells (BMSCs)-specific affinity peptide. The biphasic scaffold platform retains more cells homogeneously within the sol–gel transition of chitosan and provides sufficient solid matrix strength. This biphasic scaffold platform is functionalized with an affinity peptide targeting a cell source of interest, BMSCs. The presence of conjugated peptide gives this system a biological functionality towards BMSC-specific homing both in vitro and in vivo. The functional biomaterial can stimulate stem cell proliferation and chondrogenic differentiation during in vitro culture. Six months after in vivo implantation, compared with routine surgery or control scaffolds, the functional biomaterials induced superior cartilage repair without complications, as indicated by histological observations, magnetic resonance imaging and biomechanical properties. Beyond cartilage repair, this functional biphasic scaffold may provide a biomaterial framework for one-step tissue engineering strategy by homing endogenous cells to stimulate tissue regeneration.     

Preparation,characterization and in vitro analysis of novel structured nanofibrous scaffolds for bone tissue engineering

In a previous study, a three-dimensional nanofibrous spiral scaffold for bone tissue engineering was developed, which showed enhanced human osteoblast cell attachment, proliferation and differentiation compared with traditional cylinder scaffolds, owing to the incorporation of spiral structures and nanofiber. However, the application of these scaffolds to bone tissue engineering was limited by their weak mechanical strength. This limitation triggered the design for novel structured scaffolds with reinforced physical characteristics. In this study, spiral polycaprolactone (PCL) nanofibrous scaffolds were inserted into poly(lactide-co-glycolide) (PLGA) microsphere sintered tubular scaffolds to form integrated scaffolds to provide mechanical properties and bioactivity appropriate for bone tissue engineering. Four experiment groups were designed: PLGA cylinder scaffold; PLGA tubular scaffold; PLGA tubular scaffold with PCL spiral structured inner core; PLGA tubular scaffold with PCL nanofiber containing spiral structured inner core. The morphology, porosity and mechanical properties of the scaffolds were characterized. Furthermore, human osteoblastic cells were seeded on these scaffolds, and the cell attachment, proliferation, differentiation and mineralized matrix deposition on the scaffolds were evaluated. The integrated scaffolds had Young’s modulus 250–300 MPa, and compressive strength 8–11 MPa under uniaxial compression. With the addition of an inner highly porous insert to the tubular shell, human osteoblast cells seeded on the integrated scaffolds showed slightly higher cell proliferation, 20–25% more alkaline phosphatase expression and twofold higher calcium deposition than those on the cylinder and tubular scaffolds. Furthermore, compared with sintered PLGA cylinder scaffolds, the integrated scaffolds allowed better cellular infiltration Therefore, this design demonstrates great potential for integrated scaffolds in bone tissue engineering applications.     

Repair of Achilles tendon defect with autologous ASCs engineered tendon in a rabbit model

Adipose derived stem cells (ASCs) are an important cell source for tissue regeneration and have been demonstrated the potential of tenogenic differentiation in vitro. This study explored the feasibility of using ASCs for engineered tendon repair in vivo in a rabbit Achilles tendon model. Total 30 rabbits were involved in this study. A composite tendon scaffold composed of an inner part of polyglycolic acid (PGA) unwoven fibers and an outer part of a net knitted with PGA/PLA (polylactic acid) fibers was used to provide mechanical strength. Autologous ASCs were harvested from nuchal subcutaneous adipose tissues and in vitro expanded. The expanded ASCs were harvested and resuspended in culture medium and evenly seeded onto the scaffold in the experimental group, whereas cell-free scaffolds served as the control group. The constructs of both groups were cultured inside a bioreactor under dynamic stretch for 5 weeks. In each of 30 rabbits, a 2 cm defect was created on right side of Achilles tendon followed by the transplantation of a 3 cm cell-seeded scaffold in the experimental group of 15 rabbits, or by the transplantation of a 3 cm cell-free scaffold in the control group of 15 rabbits. Animals were sacrificed at 12, 21 and 45 weeks post-surgery for gross view, histology, and mechanical analysis. The results showed that short term in vitro culture enabled ASCs to produce matrix on the PGA fibers and the constructs showed tensile strength around 50 MPa in both groups (p > 0.05). With the increase of implantation time, cell-seeded constructs gradually form neo-tendon and became more mature at 45 weeks with histological structure similar to that of native tendon and with the presence of bipolar pattern and D-periodic structure of formed collagen fibrils. Additionally, both collagen fibril diameters and tensile strength increased continuously with significant difference among different time points (p < 0.05). In contrast, cell-free constructs failed to form good quality tendon tissue with fibril structure observable only at 45 weeks. There were significant differences in both collagen fibril diameter and tensile strength between two groups at all examined time points (p < 0.05). The results of this study support that ASCs are likely to be a potential cell source for in vivo tendon engineering and regeneration.     

Fibrin promotes proliferation and matrix production of intervertebral disc cells cultured in three-dimensional poly(lactic-co-glycolic acid) scaffold

Previously, we have proven that fibrin and poly(lactic-co-glycolic acid) (PLGA) scaffolds facilitate cell proliferation, matrix production and early chondrogenesis of rabbit articular chondrocytes in in vitro and in vivo experiments. In this study, we evaluated the potential of fibrin/PLGA scaffold for intervertebral disc (IVD) tissue engineering using annulus fibrosus (AF) and nucleus pulposus (NP) cells in relation to potential clinical application. PLGA scaffolds were soaked in cells–fibrin suspension and polymerized by dropping thrombin–sodium chloride (CaCl₂) solution. A PLGA–cell complex without fibrin was used as control. Higher cellular proliferation activity was observed in fibrin/PLGA-seeded AF and NP cells at each time point of 3, 7, 14 and 7 days using the MTT assay. After 3 weeks in vitro incubation, fibrin/PLGA exhibited a firmer gross morphology than PLGA groups. A significant cartilaginous tissue formation was observed in fibrin/PLGA, as proven by the development of cells cluster of various sizes and three-dimensional (3D) cartilaginous histoarchitecture and the presence of proteoglycan-rich matrix and glycosaminoglycan (GAG). The sGAG production measured by 1,9-dimethylmethylene blue (DMMB) assay revealed greater sGAG production in fibrin/PLGA than PLGA group. Immunohistochemical analyses showed expressions of collagen type II, aggrecan core protein and collagen type I genes throughout in vitro culture in both fibrin/PLGA and PLGA. In conclusion, fibrin promotes cell proliferation, stable in vitro tissue morphology, superior cartilaginous tissue formation and sGAG production of AF and NP cells cultured in PLGA scaffold. The 3D porous PLGA scaffold–cell complexes using fibrin can provide a vehicle for delivery of cells to regenerate tissue-engineered IVD tissue.     

Hydrogel swelling as a trigger to release biodegradable polymer microneedles in skin

Biodegradable polymeric microneedles were developed as a method for achieving sustained transdermal drug release. These microneedles have potential as a patient-friendly substitute for conventional sustained release methods. However, they have limitations related to the difficulty of achieving separation of the needles into the skin. We demonstrated that microneedle separation into the skin was mediated by hydrogel swelling in response to contact with body fluid after the needles were inserted into the skin. The hydrogel microparticles were synthesized by an emulsification method using poly-N-isopropylacrylamide (PNIPAAm). The microneedles were fabricated by micromolding poly-lactic-co-glycolic acid (PLGA) after filling the cavities of the mold with the hydrogel microparticles. The failure of microneedle tips caused by hydrogel swelling was studied in regard to contact with water, insertion of microneedles into porcine cadaver skin in vitro, stress-strain behavior, and insertion into the back skin of a hairless mouse in vivo. The drug delivery property of the hydrogel particles was investigated qualitatively by inserting polymer microneedles into porcine cadaver skin in vitro, and the sustained release property of PLGA microneedles containing hydrogel microparticles was studied quantitatively using the Franz cell model. The hydrogel particles absorbed water quickly, resulting in the cracking of the microneedles due to the difference in volume expansion between the needle matrix polymer and the hydrogel particles. The swollen particles caused the microneedles to totally breakdown, leaving the microneedle tips in the porcine cadaver skin in vitro and in the hairless mouse skin in vivo. Model drugs encapsulated in biodegradable polymer microneedles and hydrogel microparticles were successfully delivered by releasing microneedles into the skin.