Immediate versus delayed loading of dental implants in edentulous maxillae: a 36-month prospective study

Purpose: The aim of this study was to compare survival rates and radiographic outcomes of immediate and delayed implant loading in edentulous maxillae. Materials and Methods: Forty-nine patients in need of maxillary full-arch treatment were randomized into two groups: test group (n = 34) treated following the Columbus Bridge Protocol with 4 to 6 implants loaded within 24 hours and a control group (n = 15) treated following the ad modum Branemark protocol with 6 to 9 implants loaded a mean 8.75 months after surgery. Two hundred sixty implants (test: n = 163, control: n = 97) were placed, and subjects were treated with screw-retained full-arch prostheses. Bone levels were measured at baseline and at 1, 2, and 3 years and analyzed using repeated-measures analysis of variance. Results: All patients appeared at all scheduled recall visits. No differences in cumulative survival rates were found between groups at 36 months. Ten implants (6.1%) failed in the test group; four (4.1%) failed in the control group. At 36 months, no prosthetic failures were detected. Significantly less bone loss was found in the test group at all time intervals (P < .001). The average bone level from the implant-abutment connection was 1.3 mm in the test group and 1.9 mm in the control group at 12 months, 1.5 mm and 2.2 mm at 24 months, and 1.6 mm and 2.3 mm at 36 months, respectively. Conclusion: In the edentulous maxilla, the Columbus Bridge Protocol involving immediate loading of implants placed in both healed and fresh extraction sites exhibited equivalent implant survival and less marginal bone loss at 3 years compared to the conventional two-stage delayed loading protocol. Int J Prosthodont 2011;24:294-302.     

无牙颌患者种植即刻修复临床观察

目的:通过对上、下颌无牙颌患者即刻修复效果1年的回顾性研究,分析其成功率及相关影响因素。方法:从2009年7月至2010年9月,胡忠医院种植修复科行无牙颌即刻修复病例共18例118枚,8例60枚植入上颌无牙颌,10例58枚植入下颌无牙颌,术后丙烯酸树脂临时义齿即刻修复。3~6月后永久固定修复。结果:18例118枚种植体中,101枚即刻修复,12~26个月后种植体累积存留率100%,修复体成功率100%。结论:无牙颌即刻修复具有较好的短期临床效果     

Immediate rehabilitation of the completely edentulous jaw with fixed prostheses supported by either upright or tilted implants: a multicenter clinical study

PURPOSE: The aims of this study were to assess the treatment outcome of immediately loaded full-arch screw-retained prostheses with distal extensions supported by both upright and tilted implants for the rehabilitation of edentulous jaws and to compare the outcomes of upright versus tilted implants. MATERIALS AND METHODS: At 4 study centers, 342 Osseotite NT implants were consecutively placed in 65 patients (96 implants were placed in 24 mandibles and 246 implants in 41 maxillae). The 2 distal implants were tilted by 25 to 35 degrees. Provisional full-arch restorations made of a titanium framework and acrylic resin teeth were delivered within 48 hours of surgery and immediately loaded. The final prosthesis was delivered after 3 months of healing. RESULTS: Three implants failed during the first year and another 2 within 18 months of loading in the maxilla. The cumulative implant survival rate for the maxilla was 97.59% for up to 40 months of follow-up. No implant failure was recorded for the mandible. The prosthetic success rate was 100%. Marginal bone loss around upright and tilted implants was similar. Patients were satisfied of their esthetics, phonetics, and function. CONCLUSION: The preliminary results of this study suggest that immediate rehabilitation of the edentulous maxilla and mandible by a hybrid prosthesis supported by 6 or 4 implants, respectively, may represent a viable treatment alternative with respect to more demanding surgical procedures. The clinical results indicate that immediately loaded tilted implants may achieve the same outcome as upright implants in both jaws.     

Immediate loading of dental implants placed in revascularized fibula free flaps: a clinical report on 2 consecutive patients

PURPOSE: The objective of this study was to report the clinical outcome of dental implants placed in revascularized fibula flaps for the reconstruction of severely atrophied edentulous maxillae and immediately loaded with full-arch implant-supported prostheses. MATERIALS AND METHODS: Two patients, a 55-year-old woman and a 59-year-old woman, who presented with severely atrophied edentulous maxillae and local anatomy incompatible with rehabilitation with conventional complete removable dentures and insufficient bone volume for placement of implants of adequate dimensions were selected for reconstruction with revascularized fibula free flaps. Three months after the reconstructive procedure, Br?nemark System dental implants (8 in the 55-year-old patient, 7 in the 59-year-old patient) were placed in the reconstructed areas and immediately loaded with implant-supported full-arch prostheses. The mean follow-up period of implants after the start of prosthetic loading was 24 months. Radiographic peri-implant bone level changes and peri-implant clinical parameters (Plaque Index, Bleeding Index, and probing depth) were evaluated. RESULTS: No implants were lost during the follow-up period. Implant survival and success rates were 100% and 93.3%, respectively. Peri-implant clinical parameters presented values consistent with those obtained for implants placed in native nonreconstructed bone and allowed to heal before loading. DISCUSSION: To the authors' knowledge, this is the first time that the successful immediate loading of implants placed in fibula free flaps for the rehabilitation of totally edentulous patients with severely resorbed maxillae or mandibles has been described. CONCLUSION: Despite the limited number of patients and the short follow-up period, immediate loading of implants placed in revascularized fibula free flaps appears to be a reliable method for the dental rehabilitation of these patients.     

Immediate loading of implants in the edentulous maxilla: use of an interim fixed prosthesis followed by a permanent fixed prosthesis: a 32-month prospective radiological and clinical study

Purpose: The aim of this study was to prospectively evaluate the survival rate of splinted and immediately loaded Straumann sandblasted, large-grit, acid-etched, solid-screw dental implants in the edentulous maxilla after 32 months of loading.
Materials and Methods: Twenty-eight patients (mean age 63 years) with edentulous maxillae received 168 implants (six each) and an implant-supported fixed interim prosthesis within 24 hours after surgery. After a mean healing time of 15 weeks, the patients received permanent screw-retained prostheses. Clinical and radiological examinations were made at implant placement and after 8, 20, and 32 months of loading. All permanent prostheses were removed at the 32-month follow-up; implant stability was checked with a torque device, and the implant stability quotient was determined with resonance frequency analysis.
Results: Mean marginal bone loss from baseline to 8 months after loading was 1.6 mm (SD 1.16; p  = .094), from 8 to 20 months 0.41 mm (SD 0.63; p  = .094), and from 20 to 32 months 0.08 mm (SD 0.49; p  = .039). The 32-month cumulative survival rate was 98.2%.
Conclusions: The 32-month survival of solid-screw implants – immediately loaded within 24 hours after placement – was similar to survival rates reported for solid-screw implants with conventional loading. Immediate loading and splinting of implants in the edentulous maxilla is a viable treatment alternative.     

Immediate occlusal loading of double acid-etched surface titanium implants in 41 consecutive full-arch cases in the mandible and maxilla: 6- to 74-month results

BACKGROUND: The high success rate of dental implants has changed the quality of life for many patients. Immediate loading finds its application in some clinical cases and certainly adds another modality of treatment for the implant patient. Starting with a few implants immediately loaded with a bar overdenture in the mandible, the concept of immediate loading evolved to loading multiple implants in both the maxilla and mandible. METHODS: In this investigation, 41 consecutive patients who needed full-arch restorations were treated with 343 double acid-etched surface implants between May 1998 and March 2004. The sample included smokers and bruxers. Twenty-three mandibular and 26 maxillary cases were treated, loading the implants within 48 hours, by using resin provisional prostheses, metal-reinforced provisional prostheses, or definitive prostheses (metal-acrylic or metal-ceramic). All implants were followed for 12 to 74 months. Follow-up consisted of clinical as well as radiographic examination. Furthermore, resonance frequency analysis was done in most of the implants during the last 2 years. RESULTS: The success rate obtained was 99.42% (only two mandibular implants that are still surviving were considered failures). The bone level was measured every year. The average radiographic bone level change was 0.56 mm at 12, 0.76 mm at 24, 0.84 mm at 36, 0.82 mm at 48, 0.83 mm at 60, and 0.94 mm at 72 months. CONCLUSION: A high success rate can be achieved when double acid-etched surface implants are immediately loaded with fixed full-arch restorations in the maxilla and mandible.     

Immediate occlusal loading of Osseotite implants in the lower edentulous jaw. A multicenter prospective study

OBJECTIVE: This paper reports the results of a prospective multicenter clinical study on immediately fully occlusally loaded full-arch screw-retained prostheses with distal extensions (hybrid prostheses) supported by Osseotite implants inserted in edentulous lower jaws. METHOD AND MATERIAL: Sixty-two patients were enrolled in four clinical centers. Three hundred and twenty-five Osseotite implants were inserted and occlusally loaded according to an immediate loading protocol. The temporary prosthesis was delivered 4 h from surgery. The final prosthesis was delivered after 6 months. Marginal bone loss was monitored from periapical radiographs using a computerized technique. RESULTS: Two implants failed to integrate within 2 months of occlusal loading. A cumulative implant success rate of 99.4% was achieved for a period of 12-60 months postplacement (mean 28.6+/-14.1 (SD) months). Crestal bone loss around the immediately loaded implants was similar to that reported for standard delayed loading protocols. CONCLUSION: The results of this study suggest that the rehabilitation of the edentulous mandible by an immediate occlusally loaded hybrid prosthesis supported by five to six Osseotite implants represents a viable alternative treatment to classic delayed loading protocols.     

临时种植体即刻负载在半颌即刻种植中的应用

目的：评价临时种植体即刻负载在半颌即刻种植中的应用效果。方法：20例半颌即刻种植患者行136枚即刻种植体植入,采用95枚临时种植体即刻负载恢复患者牙列。3-6月后行固定修复。结果：即刻负载临时种植体和即刻种植体成功率达100%。结论：临时种植体即刻负载半颌即刻种植是很好的临床方法。     

Immediate functional loading of Brånemark system implants in edentulous mandibles: clinical report of the results of developmental and simplified protocols

PURPOSE: This report evaluates the 5-year results of 9 of 10 patients in a clinical investigation of immediate functional loading of Br?nemark System implants in edentulous mandibles, and of 24 patients treated with a simplified protocol for the same indication. The purpose of the paper is to suggest a simple, reliable, and documented method for immediate implant loading of complete-arch mandibular prostheses. MATERIALS AND METHODS: Ten healthy patients in need of full-arch mandibular implant reconstruction (development group) were treated between December 1993 and December 1994 with 130 Br?nemark System standard Implants, placed in fresh extraction and healed sites. Four implants per patient were immediately loaded with acrylic resin fixed prostheses. The prostheses were replaced by metal-framework conversion prostheses approximately 6 weeks later, and definitive metal-reinforced prostheses incorporating all implants were placed after second-stage surgery. An additional 24 patients were treated with a simplified protocol using a total of 144 implants placed between March 1997 and October 2000. In these patients, the acrylic resin prostheses were not disturbed for 3 months, and fewer implants were used with an increasing ratio of implants loaded. Eventually, all Implants were loaded immediately for the last patients treated. RESULTS: The prosthesis survival rate was 100% for the total material. In the developmental group, the implant cumulative survival rate was 80% for the immediately loaded implants after 5 years, while the 2-stage implants reached 96%. Bone level measurements showed no differences between immediate and 2-stage protocols for this group. The implant cumulative survival rate was 97% for the simplified treatment group. DISCUSSION AND CONCLUSION: A predictable and simple concept for loading of immediate implant prostheses in edentulous mandibles was demonstrated. Results from the development of this technique suggest that it may be essential to maintain the initial implant splinting over a healing period of about 3 months and that implant placement between the mental foramina provides optimal support.     

Immediately loaded implants supporting fixed prostheses in the edentulous maxilla: a preliminary clinical and radiologic report

PURPOSE: To evaluate the survival rate of immediately loaded ITI sand-blasted, large-grit, acid-etched (SLA) solid-screw dental implants in the edentulous maxilla after 8 months of loading. MATERIALS AND METHODS: Twenty-eight patients (mean age 63 years) with edentulous maxillae each received 6 implants and 1 implant-supported fixed provisional prosthesis within 24 hours after surgery. After a mean healing time of 15 weeks, the patient received a definitive, screw-retained, implant-supported fixed prosthesis. A total of 168 implants were placed. Clinical parameters were registered after 1 month of loading with the implant-supported fixed prostheses as well as 8 months after implant placement. Radiologic examinations and assessments were made at implant placement and after 8 months. RESULTS: The mean marginal bone level at implant placement was 1.6 mm (range 0 to 5.1; SD 1.1) apical of the reference point (the implant shoulder). The mean marginal bone level at the 8-month follow-up was 3.2 mm (range 0.4 to 5.9; SD 1.1) apical of the reference point. Three implants failed during the healing period. DISCUSSION: The improved results in the present study might be a result of the positive effect of splinting the implants immediately after placement. CONCLUSION: ITI SLA solid-screw implants immediately loaded (ie, loaded within 24 hours of placement) and supporting fixed prostheses had successful survival rates after 8 months. The present results constitute a solid baseline for future follow-up studies.     

Immediate function with fixed implant-supported maxillary dentures: a 12-month pilot study

STATEMENT OF PROBLEM: Immediate occlusal loading of dental implants in the edentulous mandible has proven to be an effective, reliable, and predictable procedure. There is little long-term data available on similar treatments in the edentulous maxilla. PURPOSE: The purpose of this study was to evaluate the 12-month implant survival after immediate loading of 4 to 6 implants with fixed screw-retained prostheses in edentulous maxillae. MATERIAL AND METHODS: Twenty-one patients, edentulous or with remaining teeth to be extracted in the maxilla, received 4 to 6 implants (n=111). The patients were restored with screw-retained fixed provisional prostheses supported by palladium-alloy frameworks within 24 hours after surgery. Insertion torques for implants were at least 40 Ncm. Implants, grouped as tapered or cylindrical screws, were placed in healed bone or extraction sockets. Implants were also classified as either vertical or off-angle. Definitive prostheses were placed after a mean healing time of 18 weeks. Radiographic examinations were made at the time of placement of provisional prostheses and 12 months later. Between-groups bone resorption was compared using 2-way ANOVA (alpha=.05). RESULTS: The mean follow-up time for all of the patients was 20 months (range, 13 to 28 months). The cumulative implant survival rate at the 12-month follow-up visits (after surgery) was 92.8%; the prostheses survival rate was 100%. No significant differences were found between the survival of tapered or cylindrical screw-type implants placed in postextraction sockets versus those in healed edentulous sites or between vertical and off-angle placed implants. Eight implants failed during the first 3 months, 5 of which were the most distal implants. The mean reduction in marginal bone height over the 12-month observation period was 0.84 mm (CI 95%; 0.68-0.99 mm). CONCLUSIONS: In this study with 12-month follow-up, 4 to 6 implants were sufficient to successfully support fixed implant screw-retained prostheses in the edentulous maxillae of 21 patients.     

Immediate functional loading of TiOblast dental implants in full-arch edentulous mandibles: a 3-year prospective study

Introduction: Implant-prosthetic rehabilitation of the completely edentulous mandible has evolved to a simplified procedure with shorter treatment time and survival rates of 95–100% depending on the implant system used.
Purpose: The aim was to evaluate the 3-year clinical success of Astra Tech TiOblast implants, functionally loaded on the day of surgery with a fixed full-arch bridge in the mandible.
Materials and methods: One hundred and twenty-five implants of 3.5–4 mm width and 11–17 mm length were installed in 25 edentulous mandibles of 15 female and 10 male patients. Implants were functionally loaded on the day of surgery with a provisional, acrylic, glassfibre reinforced, 10 unit bridge. After 3–4 months, the final 12-unit bridge was constructed. Radiographical bone loss was measured on peri-apical radiographs after 3, 12, 24 and 36 months.
Results: All implants were functional during the whole study period yielding a survival rate of 100%. None of the fixtures showed pain or mobility after manual torque with 20 N cm at the 3-month control. Mean radiographical bone loss after 3 months and 1, 2 and 3 years was 0.6 mm (SD 0.7), 0.8 mm (SD 0.8), 1 mm (SD 0.8) and 1.3 (SD 1) respectively, which was statistically significantly increasing up to 1 year.
Conclusion: Immediate loading of full-arch mandibular bridgework on five TiOblast implants offers a long-lasting clinical result with 100% fixture survival and stable bone-to-implant contact up to 3 years.     

Prospective clinical evaluation of 1920 Morse taper connection implants: results after 4 years of functional loading

Purpose: This study evaluated the survival rate and the clinical, radiographic and prosthetic success of 1920 Morse taper connection implants.
Material and methods: One thousand nine hundred and twenty Morse taper connection implants were inserted in 689 consecutive patients, from January 2003 until December 2006. Implants were clinically and radiographically evaluated at 12, 24, 36 and 48 months after insertion (mean follow-up per implant: 25.42 months). Modified plaque index (mPI), modified sulcus bleeding index, probing depth (PD) and the distance between implant shoulder and first crestal bone–implant contact (DIB) were measured in mm. Success criteria included the absence of suppuration and clinically detectable implant mobility, PD<5 mm, DIB<1.5 mm after 12 months of functional loading and not exceeding 0.2 mm for each following year, the absence of recurrent prosthetic complications at the implant–abutment interface. Prosthetic restorations were fixed partial prostheses (364 units), single crowns (SCs: 307 units), fixed full-arch prostheses (53 units) and overdentures (67 units).
Results: The overall cumulative implant survival rate was 97.56% (96.12% in the maxilla and 98.91% in the mandible). The cumulative implant success rate was 96.61% (95.25% in the maxilla and 98.64% in the mandible). Only a few prosthetic complications were reported (0.65% of loosening at implant–abutment interface in SCs).
Conclusion: The use of Morse taper connection implants represents a successful procedure for the rehabilitation of partially and completely edentulous arches. The absence of an implant–abutment interface (microgap) is associated with minimal crestal bone loss. The high mechanical stability significantly reduces prosthetic complications.     

Immediate occlusal loading and tilted implants for the rehabilitation of the atrophic edentulous maxilla: 1-year interim results of a multicenter prospective study

OBJECTIVES: The aims of this prospective study were to assess the treatment outcome of immediately loaded full-arch fixed bridges anchored to both tilted and axially placed implants for the rehabilitation of fully edentulous maxillae and to compare the outcome of axial vs. tilted implants. MATERIAL AND METHODS: Forty-one patients with edentulous maxillae were included in the study. Each patient received a full-arch fixed bridge supported by four axial implants and two distal tilted implants. Loading was applied within 48 h from surgery. Patients were scheduled for follow-up at 6 months, 1 year and annually up to 5 years. Radiographic evaluation of marginal bone-level change was performed at 1 year. RESULTS: One patient died 4 months after surgery. Thirty patients were followed for a minimum of 1 year (range 3-42 months, mean 22.1 months). Three failures were recorded at 1-year follow-up (two axial implants and one tilted). Two more implants (one tilted and one axially placed) were lost within 18 months of loading. The 1-year implant survival rate was 98.8% for both axial and tilted implants. Prosthesis success rate was 100% at 1 year. Marginal bone loss around axial and tilted implants at 12-month evaluation was similar, being, respectively, 0.9+/-0.4 (standard deviation) mm and 0.8+/-0.5 mm. CONCLUSIONS: The present preliminary data suggest that immediate loading associated with tilted implants could be considered to be a viable treatment modality for the atrophic maxilla and that there does not seem to be a different clinical outcome between tilted and axial implants.     

Satisfaction and quality of life with palatal positioned implants in severely atrophic maxillae versus conventional implants supporting fixed full-arch prostheses

Background

To evaluate satisfaction and quality of life in patients with palatal positioned implants supporting fixed full-arch prostheses to rehabilitate edentulous maxillae with horizontal atrophy and compare them with conventional well-centered implants placed in non-atrophic supporting fixed full-arch prostheses.

Material and Methods

A clinical retrospective study was performed of patients that were rehabilitated with full-arch fixed implant-supported maxillary prostheses and had a minimum follow-up of 5 years after implant loading. Patients were divided into 2 groups: patients with class IV maxilla according to Cawood and Howell and treated with palatal positioned implants (test) and with class III maxilla and treated with implants well-centered in the alveolar ridge and completely surrounded by bone (control). Ten-cm visual analogue scales (VAS) (range 1-10) and the OHIP-14 (Oral Health Impact Profile) questionnaire were used respectively to estimate patient satisfaction and quality of life after implant therapy. Statistical analysis was performed applying Mann-Whitney Test using alpha set at 0.05.

Results

Mean global and specific satisfaction – except for self-esteem – were superior for the test group than the control group, although differences were not statistically significant. Regarding quality of life, the reported incidence of problems was lower in the test group for all the studied ítems except for ‘problems at work’. However, differences were not statistically significant in any case.

Conclusions

Despite the limitations of the study (retrospective and nonrandomized design) the results suggest that the prosthesis design needed to rehabilitate palatally positioned implants (more coverage of palate) does not lead to lower satisfaction and quality of life of patients, compared to patients treated with implants placed centered and conventional design prostheses that do not cover the palate. Key words:Atrophic maxilla, palatal implants, satisfaction, quality of life.     

Immediate loading with fixed full-arch prostheses in the maxilla: Review of the literature

Objectives: To critically review the evidence-based literature on immediate loading of implants with fixed full-arch prostheses in the maxilla to determine 1) currently recommended performance criteria and 2) the outcomes that can be expected with this procedure. Study Desing: Studies from 2001 to 2011 on immediate loading with fixed full-arch maxillary prostheses were reviewed. Clinical series with at least 5 patients and 12 months of follow-up were included. Case reports, studies with missing data and repeatedly published studies were excluded. In each study the following was assessed: type of study, implant type, number of patients, number of implants, number of implants per patient, use of post-extraction implants, minimum implant length and diameter, type of prosthesis, time until loading, implant survival rate, prosthesis survival rate, marginal bone loss, complications andmean follow-up time. Criteria for patient selection, implant primary stability and bone regeneration were also studied. Results: Thirteen studies were included, reporting a total of 2484 immediately loaded implants in 365 patients. Currently accepted performance criteria regarding patient and implant selection, and surgical and prosthetic procedures were deduced from the reviewed articles. Implant survival rates went from 87.5% to 100%, prosthesis survival rates from 93.8% to 100% and radiographic marginal bone loss from 0.8 mm to 1.6 mm.No intraoperative complications and only minor prosthetic complications were reported. Conclusions: The literature on immediate loading with fixed full-arch prostheses in the maxilla shows that a successful outcome can be expected if adequate criteria are used to evaluate the patient, choose the implant and perform the surgical and prosthetic treatment. Lack of homogeneity within studies limits the relevance of the conclusions that can be drawn, and more controlled randomized studies are necessary to enable comparison between the immediate and the conventional loading procedures. Key words:Immediate loading, full-arch, dental implants, loading protocols.     

Immediate and Early Loading of Chemically Modified Implants in Posterior Jaws: 3‐Year Results from a Prospective Randomized Multicenter Study

Background: There is a lack of well‐designed prospective, randomized clinical trials evaluating the efficacy of immediate and early loading of implants placed in the partially edentulous posterior maxilla or mandible. Purpose: The aim of this study was to evaluate crestal bone level changes over 3 years following immediate or early loading of Straumann implants with a chemically modified surface (SLActive®, Institut Straumann AG, Basel, Switzerland) placed in the posterior maxilla and mandible. Materials and Methods: Subjects received temporary restorations immediately or 28 to 34 days after surgery, with permanent restorations placed at 20 to 23 weeks. Bone level changes were measured by comparison of standardized radiographs taken on the day of implant placement and 5, 12, 24, and 36 months thereafter. Results: Two hundred thirty‐nine of two hundred sixty‐six patients (89.9%) completed the trial. Implant survival rates were 97.4% and 96.7% in the immediate and early loading groups, respectively (p = not significant). Over 36 months, the mean bone level change for immediately loaded implants was 0.88 ± 0.81 mm versus 0.57 ± 0.83 mm for the early‐loaded group (p < .001). After adjusting for a slight difference in initial placement depth, the time of loading had no significant influence on bone level change. Conclusions: Changes in crestal bone level occurred mostly during the first 5 months postloading. After this bone remodeling period, crestal bone level was stable up to 36 months. Implants with a chemically modified surface are safe and predictable for immediate and early loading in the posterior maxilla and mandible.     

部分牙缺失种植即刻功能负荷的临床探讨

目的:对部分牙缺失种植即刻功能负荷进行临床探讨。方法:将NobelBiocare种植体植入颌骨内,种植体植入扭力必须达到35Ncm以上。选择永久基台接在种植体上,用一定的扭力拧紧基台,基台水平印模,按常规制作和即刻戴上临时塑料修复体。6周后再印模,制作和戴上烤瓷修复体。结果:36例65枚种植体中,下颌22例41枚种植体,上颌14例24枚种植体,修复后成功率为98.5%。结论:部分牙缺失种植即刻功能负荷初步临床结果是满意的,其长期效果有待进一步的观察。     

7-year follow-up of 93 immediately loaded titanium dental implants

Recently, several experimental and clinical investigations found that immediately loaded implants obtained satisfactory levels of osseointegration with high success percentages. Only a few long-term studies of immediately loaded implants have been reported in the literature. The aim of this study was a 7-year clinical and radiographic follow-up of 93 immediately loaded dental implants in human patients. Eleven patients were consecutively enrolled in this study. A total of 7 full and 9 partial edentulous arches were rehabilitated. Patients presented a completely edentulous mandible (n=6), a completely edentulous maxilla (n=1), mandibular posterior edentulous areas (n=5), or a posterior maxillary edentulous area (n=1). Patients were rehabilitated with a bar and an overdenture (n=4), a provisional prosthesis of 3 to 12 elements (n=11), or a metal-ceramic bridge of 10 elements (n=1). A total of 93 implants were inserted and loaded within a 24-hour time frame. Six implants failed in the first year after loading. No more failures were observed in the following 6 years, and all the other implants were well integrated from a clinical and radiographic point of view. The cumulative success rate at 7 years was 93.5%, and the prostheses survival rate was 98.5%. The mean marginal bone loss was 0.6 mm after the first year and 1.1 mm at the 7-year evaluation. Primary stability is one of the most important parameters in immediately loaded implants because it avoids micromotion at the bone-implant interface. Four of the 6 failures in our patients occurred in partially edentulous patients; an excessive load applied to these small bridges could be the reason for the failure. Also, the bone quality is important, for 3 of our failed implants had been inserted in D3 bone. Our clinical and radiographic results have shown that these immediately loaded implants have remained osseointegrated for a long period. Our results point to the possibility of using the immediate loading technique in selected and well-informed cases.     

Restoration of partially edentulous patients using dental implants with a microtextured surface: a prospective comparison of delayed and immediate full occlusal loading

PURPOSE: The aim of this study was to determine the clinical effectiveness of placing dental implants with microtextured surfaces into full occlusal loading at the time of placement in partially edentulous patients. MATERIALS AND METHODS: Two demographically similar groups of 14 patients each were treated with a total of 92 Spline Twist Implants (Centerpulse Dental, Carlsbad, CA). Test implants were placed into immediate full occlusal loading, and control implants were restored using a conventional delayed loading procedure. Otherwise, both groups of patients received similar therapy from the same treatment team. Radiographs, periodontal indices, and Periotest values were recorded every 6 months during routine clinical follow-up appointments. The mean loading time for all prostheses was 24 months at the time of this report. RESULTS: No implants failed in the test group, and 1 implant failed before loading in the control group. Cumulative implant success was 98.9% for all implants placed (test group = 100%; control group = 92.9%). Periodontal measurements indicated no significant clinical differences between implants placed into immediate full occlusal loading and those loaded via a conventional delayed protocol. DISCUSSION: Immediate full occlusal loading of partial prostheses supported by microtextured implants in partially edentulous patients demonstrated excellent clinical results, with no adverse periodontal effects after 24 months of function. Additional follow-up will provide invaluable information on the long-term effects of this technique. CONCLUSION: Immediate full occlusal loading of partial prostheses supported by microtextured implants can be successfully achieved for 24 months in highly motivated patients with excellent oral hygiene.