Mandibular third molar space in different antero-posterior skeletal patterns

Retromolar space has long been identified as a major factor in the aetiology of mandibular third molar impaction. The aims of this study were to compare mandibular third molar space between the different antero-posterior (A-P) skeletal patterns, between erupted and impacted third molars in the different A-P skeletal patterns, and to report on the status of third molar eruption/impaction among the studied subjects. A total of 432 mandibular third molars in 270 subjects (132 females and 138 males) were investigated from dental pantomograms (DPTs) and lateral cephalograms (LC). The average age for the total sample was 20.80 ± 2.03 years. The subjects were divided into three groups according to their ANB angle as follows: skeletal Class I (144 third molars in 90 subjects), skeletal Class II (145 third molars in 95 subjects), and skeletal Class III (143 third molars in 85 subjects). Each group was subdivided into impacted and erupted subgroups. DPT and LC were traced and the following variables were measured: retromolar space width, third molar width and angulation, β angle, second molar angulation, mandibular length, and gonial angle. Independent t-test, analysis of variance, and chi-square test were used for statistical analysis. Retromolar space width in the Class III subjects was smaller than in the Class I subjects (P?相似文献   

Radiographic assessment of lower third molar eruption in different anteroposterior skeletal patterns and age-related groups

Objective:To analyze radiographic predictors for lower third molar eruption among subjects with different anteroposterior skeletal relations and of different age groups.Materials and Methods:In total, 300 lower third molars were recorded on diagnostic digital orthopantomograms (DPTs) and lateral cephalograms (LCs). The radiographs were grouped according to sagittal intermaxillary angle (ANB), subject age, and level of lower third molar eruption. The DPT was used to analyze retromolar space, mesiodistal crown width, space/width ratio, third and second molar angulation (α, γ), third molar inclination (β), and gonion angle. The LC was used to determine ANB, angles of maxillar and mandibular prognathism (SNA, SNB), mandibular plane angle (SN/MP), and mandibular lengths. A logistic regression model was created using the statistically significant predictors.Results:The logistic regression analysis revealed a statistically significant impact of β angle and distance between gonion and gnathion (Go-Gn) on the level of lower third molar eruption (P < .001 and P < .015, respectively). The retromolar space was significantly increased in the adult subgroup for all skeletal classes. The lower third molar impaction rate was significantly higher in the adult subgroup with the Class II (62.3%) compared with Class III subjects (31.7%; P < .013).Conclusion:The most favorable values of linear and angular predictors of mandibular third molar eruption were measured in Class III subjects. For valid estimation of mandibular third molar eruption, certain linear and angular measures (β angle, Go-Gn), as well as the size of the retromolar space, need to be considered.     

An investigation of cervicovertebral morphology in different sagittal skeletal growth patterns

The purpose of the present study was to examine and compare cervicovertebral morphology in subjects with different sagittal skeletal patterns. The material comprised lateral head films of 90 untreated subjects, 45 girls and 45 boys, aged 13-15 years. The radiographs were obtained in the natural head position using a fluid level method. The subjects were divided into three groups according to ANB angle: ANB angle between 1 and 5 degrees (skeletal Class I), larger than 5 degrees (skeletal Class II), and smaller than 1 degree (skeletal Class III). Each ANB group consisted of 30 subjects, 15 girls and 15 boys. Twenty-nine linear and four area measurements were used to assess cervicovertebral morphology. Differences between the ANB groups and between genders were assessed by means of analysis of variance and the least significant difference test. In addition, cephalometric measurements for all subjects were subjected to discriminant analysis. The results of the analysis of variance showed that there were statistically significant differences in the measurements of the lumen length of C1, inferior depths of C2 and C4, anterior intervertebral spaces of C2 and C3, posterior intervertebral space of C3, and anterior and posterior body heights of C4 among the ANB groups. The total length of C1, inferior depths of C2-C5, anterior intervertebral spaces of C2-C4, posterior intervertebral space of C2, anterior body heights of C4 and C5, and posterior body heights of C3-C5 demonstrated significant gender differences. The results of the discriminant analysis indicated that 54.4 per cent of the original grouped cases were correctly classified in the total sample. The final discriminant model was able to classify correctly 20 of the 30 Class I subjects (66.7 per cent), 17 of the 30 Class II subjects (56.7 per cent), and 12 of the 30 Class III subjects (40.0 per cent).     

Uvulo-glosso-pharyngeal dimensions in different anteroposterior skeletal patterns

The aim of this study was to investigate the uvulo-glosso-pharyngeal dimensions in subjects with different anteroposterior jaw relationship. Cephalometric radiograph of 90 subjects (45 females and 45 males, aged 14-17 years) were divided into three groups according to the ANB angle, ie, group 1, skeletal Class I (ANB angle 1-5); group 2, skeletal Class II (ANB angle >5); and group 3, skeletal Class III (ANB angle <1). In addition, each group was divided into two subgroups according to sex. Statistical analysis was undertaken using analysis of variance and least significant difference test. Pearson's Correlation test was also performed. Sex differences were found in Class I and III subjects. No sex differences were detected in Class II subjects. On average, tongue length was significantly shorter in Class III subjects (P < .05), tongue height was reduced in Class II female subjects, the soft palate was thicker in Class III females and the vertical airway length (VAL) was reduced in Class II male subjects (P < .01). In Class II subjects, the hyoid bone was closer to the mandible vertically and to C3 horizontally compared with Class I (P < .01) and Class III (P < .001) male subjects. Anteroposterior skeletal pattern showed a weak, but significant correlation with inferior pharyngeal airway space (R = -0.24, P = .024), vertical position of hyoid bone in relation to mandibular plane (R = -0.26, P = .014), and anteroposterior position of hyoid bone in relation to C3 (R = -0.561, P = .000). In conclusion, uvulo-glosso-pharyngeal dimensions are affected by anteroposterior skeletal pattern.     

Dynamic smile evaluation in different skeletal patterns

Objective:To evaluate dynamic smile in different skeletal patterns and to correlate vertical smile parameters with the underlying causative factors.Materials and Methods:A total of 150 participants ranging in age from 16–25 years were selected and divided into one of three groups—horizontal, average, and vertical skeletal pattern—using the following three cephalometric parameters: SN-MP, FMA, and Jarabak ratio. Videographic records of smile were obtained, and measurements were recorded and analyzed at rest, including upper lip length, and during smile, including maxillary incisal display, interlabial gap, intercommisural width, change in upper lip length, and smile arc. Differences among the three groups were subjected to two-way analysis of variance and post hoc and chi-square tests for smile arc. Correlations between vertical smile variables and vertical skeletal (N-ANS, N-Me) and dental cephalometric measurements (U1 to palatal plane) were also investigated.Results:Vertical parameters were significantly increased in the vertical pattern when compared with the horizontal pattern, ie, upper lip length (P < .01), maxillary incisal display (P < .001), interlabial gap (P < .001), and change in upper lip length (P < .001), whereas intercommisural width was significantly decreased in vertical pattern when compared with the horizontal pattern (P < .001). Flat smile arc was seen more frequently in the horizontal pattern. Positive correlations were found between the N-Me, U1-PP, and change in upper lip length with vertical smile parameters.Conclusions:Different skeletal patterns exhibit their characteristic smile features. Upper lip length is not responsible for increased incisal display during smile. Increased incisal display during smile is more closely associated with upper lip elevation than vertical skeletal and dental factors.     

The condylar asymmetry measurements in different skeletal patterns

In the present study, condylar asymmetry measurements were investigated on the lateral cephalometric head radiographs and the panoramic radiographs of 72 subjects (36 males and 36 females), aged 12-16-years and having different skeletal patterns. The lateral cephalometric head radiographs were divided into three groups according to the ANB angle: ANB angles smaller than 1 degrees, between 1 degrees and 5 degrees, and larger than 5 degrees. In addition, each group was also divided into two subgroups according to sex. The effects on the ANB angle and sex on the condylar asymmetry measurement were investigated on the panoramic radiographs by means of variance analysis. It was observed that while condylar + ramus ratio measurement was affected by the change of ANB angle, the other measurements were not affected by it.     

The incidence of mandibular third molar impactions in different skeletal face types

Background: The cause of mandibular third molar impaction is said to be due to inadequate space between the distal of the second mandibular molar and the anterior border of the ascending ramus of the mandible. The amount of space is determined primarily by facial growth. This study aimed to assess whether different patterns of facial growth lead to a different incidence of mandibular third molar impaction. It was hypothesized that those with predominantly horizontal (brachyfacial) would have lower incidence of mandibular third molar impaction compared with those with a predominantly vertical growth pattern (dolichofacial). Methods: Ninety‐eight dental records were sourced from the records of orthodontic patients in the Royal Dental Hospital of Melbourne and all lateral cephalometric radiographs and orthopantomograms were assessed. The degree of impaction was determined by the Pell and Gregory system, and the facial type categorized by the facial axis angle. Results: The overall rate of mandibular third molar impaction was 58.76 per cent. Those with a facial axis angle >93 (brachyfacials) demonstrated an almost two times lower incidence of mandibular third molar impaction as compared to subjects with a facial axis angle <87 (dolichofacials). Conclusions: Within the limitations of the study, it was concluded that the greater horizontal facial growth pattern of brachyfacial subjects over dolichofacial subjects provides increased space for full eruption of the mandibular third molars.     

Evaluation of pharyngeal airway space amongst different skeletal patterns

The aim of the present study was to evaluate the dimensions of the pharyngeal airway space (PAS) in awake, upright children with different anteroposterior skeletal patterns using cone beam computed tomography (CBCT). The volume, area, minimum axial area and seven linear measurements of PAS were obtained from the CBCT images of 50 children (mean age 9.16 years). The patients were divided in two groups according to the ANB angle (group I 2° ≤ ANB ≤ 5°; group II ANB > 5°). Means and standard deviations of each variable were compared and correlated using independent t-test and Pearson's correlation test. There were statistically significant differences in the following parameters: angle formed by the intersection between NA and NB lines (p<0.001), angle formed by the intersection between SN and NB lines (p<0.05), Minimal pharyngeal airway space between the uvula and the posterior pharyngeal wall (p<0.05), airway volume (p<0.01), airway area (p<0.01) and minimum axial area (p<0.05). The anteroposterior cephalometric variable SNB had positive correlation with the variables PAS-UP (p<0.01), Minimal pharyngeal airway space between the uvula tip and the posterior pharyngeal wall (p<0.05), Pharyngeal airway space on mandibular line (p<0.05), Minimal pharyngeal airway space between the back of the tongue and the posterior pharyngeal wall (p<0.05), volume airway (p<0.05), airway area (p<0.05) and minimum axial area (p<0.05). The vertical cephalometric variables angle formed by the intersection between SN and GoGn lines (p<0.05) and angle formed by the intersection between FH and mandible plane (p<0.05) showed negative correlation with PAS-UT. These results showed that PAS was statistically larger in group I than group II, indicating that the dimensions of the PAS are affected by different anteroposterior skeletal patterns.     

Cranial base measurements in different anteroposterior skeletal relationships using Bjork-Jarabak analysis

ObjectivesTo assess the linear and angular cranial base measurements (Bjork polygon) in different anteroposterior (AP) skeletal relationships using Bjork-Jarabak analysis.Materials and MethodsPretreatment lateral cephalograms of 288 (146 women, 142 men, mean ages 21.24 ± 2.72 years and 22.94 ± 3.28 years, respectively) adult patients were divided into Class I, II, and III skeletal relationships according to their ANB angle. Linear and angular measurements of Bjork polygon were measured and compared among different skeletal relationships. Analysis of variance was performed to detect the differences among groups. Independent-sample t-test was used to detect differences between men and women.ResultsThe Class II skeletal relationship has a significantly larger saddle angle than Class III does (P < .05), whereas Class III has a significantly larger gonial angle than Class II does (P < .05). The articular angle and sum of Bjork polygon angles were not significantly different among groups (P > .05). Anterior (N-S) and posterior (S-Ar) cranial base lengths were similar in the different AP skeletal relationships (P > .05). The ramal height and body of the mandible length were significantly larger in Class III compared with Class I and II (P < .05). Women had a significantly larger articular angle than men did (P < .05), although men had significantly larger linear measurements of Bjork polygon than women did (P < .05).ConclusionsThe Class III skeletal relationship has a smaller saddle angle and larger mandibular length and gonial angle. Men have a larger cranial base and mandibular linear measurements and a smaller articular angle compared with women.     

不同垂直骨面型与第三磨牙缺失率的研究

目的：了解不同垂直骨面型与第三磨牙缺失是否存在关联。方法：对符合标准的207名患者,根据头颅侧位片上MP-SN角,分为均（99例）、高（45例）、低角（63例）型;在曲面断层片统计不同垂直骨面型的第三磨牙缺失率。SPSS 17．0软件进行卡方检验。结果：高角面型组无论在上颌或下颌、单侧或双侧第三磨牙缺失率均高于低角面型组（P＜0．05）;女性双侧上颌第三磨牙缺失率高于男性（P＜0．05）;上颌第三磨牙缺失率显著高于下颌（P＜0．05）。结论：垂直骨面型与第三磨牙缺失率有相关性,高角面型者第三磨牙缺失率明显高于低角面型者。     

A comparison of cranial base growth in Class I and Class II skeletal patterns.

The purpose of this retrospective longitudinal study was to compare 7 cephalometric measurements of the cranial base in subjects with Class I and Class II skeletal patterns at ages 1 month, 2 years, and 14 years. A sample of 22 Class I and 21 Class II subjects was selected; the inclusion criteria were overjet, ANB, and Harvold unit difference. Analyses of head circumference, crown-rump length, and weight revealed no significant (P >.15) differences between the Class I and Class II infant subjects at the initial age (1 month). One angular and 6 linear measurements were first compared with a multivariate analysis of variance, which revealed significant effects for age (P <.0001) and the age by skeletal pattern interaction (P =.0266) but not for skeletal pattern (P =.3705). Analyses of variance showed significant (P <.0001) age effects for each of the cephalometric variables but no significant skeletal pattern effects (P >.10). The anterior cranial base measurement of nasion to sphenoethmoidal suture was the only variable found to have a significant age by skeletal pattern interaction (P <.006), which revealed a difference in the timing of its growth spurt that occurred between 1 month and 2 years in the Class I subjects and between 2 years and 14 years in the Class II subjects. There were no significant differences between the skeletal classes at any of the 3 ages evaluated. Conclusions from this study indicate that cranial base growth patterns are similar for Class I and Class II subjects and that the premise of a more obtuse "saddle angle" or cranial base angle in Class II skeletal patterns was not supported.     

Relationship between cranial base and jaw base in different skeletal patterns

Purpose

To determine the relationship between the cranial base and both jaw bases in different skeletal patterns.

Tomographic evaluation of buccal bone in different skeletal patterns and incisors inclination

Objective

The aim of this study was to correlate the absence of BB with skeletal patterns and incisor inclination using cone-beam computed tomography (CBCT).

Methods

The sample comprised CBCT images of 45 patients undergoing orthodontic treatment. BB was classified in each third of the anterior teeth as critical, slender, regular, and thick. The skeletal pattern was determined by the ANB (A point, nasion, B point) angle and the incisor inclination using the 1.NA and 1.NB measurements and the interincisal angle (1:1).

Results

In both analyses, the skeletal pattern of class II revealed better BB in the cervical and middle thirds than classes I and III. A higher proportion of critical BB was found in the middle thirds, and the apical third presented the best regular and thick BB conditions, mainly class I. Less BB was observed in middle and apical thirds in the upper incisors and in cervical thirds in lower incisors, mostly when they were more upright.

Conclusions

Knowledge of alveolar bone height and thickness can alter the treatment plan in orthodontics. During orthodontic treatment, more attention should be paid to the lower incisors and vertical teeth because of poor BB conditions, especially in class III skeletal patterns.

     

牙弓长度对下颌牙根尖应力影响的光弹实验研究

目的：探讨牙弓长度的改变对垂直加载时下颌各牙根尖应力的影响规律。方法：采用透明环氧树脂复制以相同牙排列成含或不含第三磨牙的3种咬合模型共6副：正常He、深覆He及单侧部分后牙反He。2.0kg垂直加载后,投影式光弹仪上观测各牙根尖主应力的大小与方向。结果：各模型下颌牙根轴倾角均无明显差别,根尖主应力大小也无显著差别。第三磨牙存在与否对正常He及深覆He的主应力方向无明显影响（P＞0．05）,而单侧部分后牙反He者,无第三磨牙时的反He对侧及反He侧非反He牙根尖主应力的远中向偏角比有第三磨牙时明显减小（P＜0．01）,而反He牙及其邻牙根尖主应力的近中向偏角也比有第三磨牙时小（P＜0．05）。第三磨牙的存在与否对大多数牙根尖的应力变化水平均无显著影响。结论：正常咬合接触关系比牙弓形态更重要。     

The premature loss of primary first molars: Space loss to molar occlusal relationships and facial patterns

Objective:To investigate space changes with the premature loss of primary first molars and their relationship to permanent molar occlusion and facial forms.Materials and Methods:Two hundred twenty-six participants (ranging in age from 7 years 8 months to 8 years 2 months; 135 female, 91 male) met all inclusion criteria designed to study space loss as a result of the premature loss of the primary first molar. After 9 months, space loss was evaluated in relationship to molar occlusion and facial form. Statistical evaluation was performed with the paired t-test and with a two-way analysis of variance for independent groups.Results:Patients with leptoprosopic facial form and end-on molar occlusions all exhibited a statistically significant difference when compared to controls in terms of space loss (P < .001). The mandibular extraction site for individuals with a mesoprosopic/euryprosopic facial form and end-on molar occlusion displayed space loss as well (P < .05). All patients with a leptoprosopic facial form and Class I molar occlusion displayed space loss in the maxilla (P < .05) and the mandible (P < .001) respectively, that was statistically significant when compared to that of the control. Individuals within the mesoprosopic/euryprosopic group and with Class I molar occlusions showed no significant difference in space loss.Conclusions:The relationship between the first permanent molar occlusion and facial form of the child has an influence on the loss of space at the primary first molar site.