Regioselective,one-pot,multi-component,green synthesis of substituted benzo[c]pyrazolo[2,7]naphthyridines

An efficient and environmentally benign synthetic protocol has been developed for the synthesis of benzo[c]pyrazolo[2,7]naphthyridine derivatives through regioselective multi-component “on-water” reaction of isatin, malononitrile and 3-aminopyrazole. The Knoevenagel condensation of isatin with malononitrile resulted in the formation of arylidene, which subsequently underwent Michael addition with 3-aminopyrazole followed by basic hydrolysis, cyclization, decarboxylation and aromatization to give the target naphthyridines in good to excellent yields. The one-pot multi-component protocol was also employed to obtain the said naphthyridines in a lower yield (10–15%) than obtained by basic hydrolysis of spiro-intermediates. The present study shows attractive features such as the use of water as a green solvent, short reaction time, reduced waste products and transition metal free C–C and C–N bond formation. The structures of the synthesized derivatives were established through FTIR, ¹H-NMR, ¹³C-NMR spectroscopy and ESI-mass spectrometry.

An efficient and environmentally benign synthetic protocol has been developed for the synthesis of benzo[c]pyrazolo[2,7]naphthyridine derivatives through regioselective multi-component “on-water” reaction of isatin, malononitrile and 3-aminopyrazole.     

Three-component microwave-assisted synthesis of 3,5-disubstituted pyrazolo[3,4-d]pyrimidin-4-ones

A practical three-component method for the synthesis of pyrazolo[3,4-d]pyrimidin-4-ones was developed. The reaction was performed in a one-pot manner under controlled microwave irradiation using easily accessible methyl 5-aminopyrazole-4-carboxylates, trimethyl orthoformate, and primary amines. Under the optimized conditions, challenging substrates, such as N-1 unsubstituted 5-aminopyrazole-4-carboxylates with another substituted amino group in position 3, reacted selectively affording 5-substituted 3-arylamino-1,5-dihydro-4H-pyrazolo[3,4-d]pyrimidin-4-ones. The reaction tolerated a range of primary amines, including anilines. The advantages of the developed protocol include short reaction time, pot- and step-economy, and convenient chromatography-free product isolation. The structural features of representative products were explored by X-ray crystallography.

A practical three-component method for the synthesis of pyrazolo[3,4-d]pyrimidin-4-ones was developed.     

Discovery of pyrazolo[3,4-d]pyrimidine and pyrazolo[4,3-e][1,2,4]triazolo[1,5-c]pyrimidine derivatives as novel CDK2 inhibitors: synthesis,biological and molecular modeling investigations

CDK2 inhibition is an appealing target for cancer treatment that targets tumor cells in a selective manner. A new set of small molecules featuring the privileged pyrazolo[3,4-d]pyrimidine and pyrazolo[4,3-e][1,2,4]triazolo[1,5-c]pyrimidine scaffolds (4–13) as well as the thioglycoside derivatives (14, 15) were designed, and synthesized as novel CDK2 targeting compounds. The growth of the three examined cell lines was significantly inhibited by most of the prepared compounds. Results revealed that most of the compounds showed superior cytotoxic activities against MCF-7 and HCT-116 with IC₅₀ range (45–97 nM) and (6–99 nM), respectively, and moderate activity against HepG-2 with IC₅₀ range of (48–90 nM) compared to sorafenib (IC₅₀: 144, 176 and 19 nM, respectively). Of these compounds, 14 & 15 showed the best cytotoxic activities against the three cell lines with IC₅₀ values of 45, 6, and 48 nM and 46, 7, and 48 nM against MCF-7, HCT-116 and HepG-2, respectively. Enzymatic inhibitory activity against CDK2/cyclin A2 was achieved for the most potent anti-proliferative compounds. Compounds 14, 13 and 15 revealed the most significant inhibitory activity with IC₅₀ values of 0.057 ± 0.003, 0.081 ± 0.004 and 0.119 ± 0.007 μM, respectively compared to sorafenib (0.184 ± 0.01 μM). Compound 14 displayed potent dual activity against the examined cell lines and CDK2, and was thus selected for further investigations. It exerted a significance alteration in cell cycle progression, in addition to apoptosis induction within HCT cells. Molecular docking simulation of the designed compounds confirmed the good fit into the CDK2 active site through the essential hydrogen bonding with Leu83. In silico ADMET studies and drug-likeness studies using a Boiled Egg chart showed suitable pharmacokinetic properties which helped in structure requirement prediction for the observed antitumor activity.

A new set of pyrazolo[3,4-d]pyrimidine and pyrazolo[4,3-e][1,2,4]triazolo[1,5-c]pyrimidine scaffolds (4–13) as well as the thioglycoside derivatives (14, 15) were designed, and synthesized as novel CDK2 targeting compounds.     

3-(Propylthio)propane-1-sulfonic acid immobilized on functionalized magnetic nanoparticles as an efficient catalyst for one-pot synthesis of dihydrotetrazolo[1,5-a]pyrimidine and tetrahydrotetrazolo[5,1-b]quinazolinone derivatives

An efficient and reusable catalyst, which is 3-(propylthio)propane-1-sulfonic acid immobillized on functionalized magnetic nanoparticles [PTPSA@SiO₂–Fe₃O₄], has been synthesized. For the first time, it is highlighted under solvent-free conditions for the catalytic activity in multicomponent synthesis of dihydrotetrazolo[1,5-a]pyrimidines, dihydrotetrazolo[1,5-a]pyrimidine-6-carboxylates and tetrahydrotetrazolo[5,1-b]quinazolinones. The structure of the catalyst was well confirmed by characterization techniques, such as FT-IR, TGA, SEM-EDX, elemental mapping, TEM, VSM and elemental analysis. Besides, this unique catalyst was found to be effectual up to six cycles, which made it spotlighted. Recyclability of catalyst, excellent yield of the products, short reaction time and clean reaction profile are the advantages of the present protocol.

A novel method for the synthesis of dihydrotetrazolo[1,5-a]pyrimidine and tetrahydrotetrazolo[5,1-b]quinazolinone derivatives using [PTPSA@SiO₂–Fe₃O₄] as a green and reusable catalyst under solvent-free conditions is reported.     

A new and straightforward route to synthesize novel pyrazolo[3,4-b]pyridine-5-carboxylate scaffolds from 1,4-dihydropyrano[2,3-c]pyrazole-5-carbonitriles

Among many acidic catalysts, amorphous carbon-supported sulfonic acid (AC-SO₃H) has been evaluated as a new-generation solid catalyst with outstanding activity. Because of the –SO₃H groups, the surface properties of the amorphous carbon catalyst were improved, which made the catalytic activity of the amorphous carbon-supported sulfonic acid many times greater than that of sulfuric acid. The amorphous carbon-supported sulfonic acid exhibited several advantages such as low cost, non-toxicity, porosity, stability, and easily adjustable chemical surface. In this paper, we introduce a new pathway for the synthesis of pyrazolo[3,4-b]pyridine-5-carboxylate scaffolds from 1,4-dihydropyrano[2,3-c]pyrazole-5-carbonitriles and aniline at room temperature under ethanol in the presence of AC-SO₃H as the catalyst. This method provided the desired products with moderate to good yields. The gram-scale synthesis of the major product was carried out with good yields (up to 80%). This strategy involves a sequential opening/closing cascade reaction. This approach presents several advantages, including room temperature conditions, short reaction time, and operational simplicity.

A new pathway for the synthesis of pyrazolo[3,4-b]pyridine-5-carboxylate scaffolds from 1,4-dihydropyrano[2,3-c]pyrazole-5-carbonitriles and aniline has been developed using sulfonated amorphous carbon at room temperature.     

Piperonal chalcone derivative incorporating the pyrazolo[3,4-b]pyridine moiety; crystal structure,spectroscopic characterization and quantum chemical investigations

A single crystal of a piperonal chalcone derivative was obtained, fully characterized, and crystallized by a slow evaporation technique. The synthesized compound was characterized by UV-Visible, FT-IR, HRMS, ¹H NMR, and ¹³C NMR spectroscopic studies and X-ray crystallography, revealing that the crystal belongs to a triclinic crystal system with a P$\bar{1}$ space group, Z = 2. In the present work, we focus on molecular modeling studies such as Hirshfeld surface analysis, energy framework calculations, frontier molecular orbital analysis, natural bond orbital analysis, and NLO properties of a π-conjugate system combining the chalcone and the pyrazole[3,4-b]pyridine scaffolds to describe the in-depth structural analysis thereof. Good agreement was found between the calculated results and experimental data. In addition, Hirshfeld surface analysis of the crystal structure showed that the intermolecular stabilization in the crystal packing comes mainly from H⋯H bond interactions. The chalcone crystal exhibits significant NLO properties suggesting that it could be considered a potential candidate for application in nonlinear optical devices.

A single crystal of a piperonal chalcone derivative was obtained, fully characterized, and crystallized by a slow evaporation technique.     

Design,synthesis and biological evaluation of benzo-[d]-imidazo-[2,1-b]-thiazole and imidazo-[2,1-b]-thiazole carboxamide triazole derivatives as antimycobacterial agents

In the search for new anti-mycobacterial agents, we revealed the importance of imidazo-[2,1-b]-thiazole and benzo-[d]-imidazo-[2,1-b]-thiazole carboxamide derivatives. We designed, in silico ADMET predicted and synthesized four series of novel imidazo-[2,1-b]-thiazole and benzo-[d]-imidazo-[2,1-b]-thiazole carboxamide analogues in combination with piperazine and various 1,2,3 triazoles. All the synthesized derivatives were characterized by ¹H NMR, ¹³C NMR, HPLC and MS spectral analysis and evaluated for in vitro antitubercular activity. The most active benzo-[d]-imidazo-[2,1-b]-thiazole derivative IT10, carrying a 4-nitro phenyl moiety, displayed IC₉₀ of 7.05 μM and IC₅₀ of 2.32 μM against Mycobacterium tuberculosis (Mtb) H37Ra, while no acute cellular toxicity was observed (>128 μM) towards the MRC-5 lung fibroblast cell line. Another benzo-[d]-imidazo-[2,1-b]-thiazole compound, IT06, which possesses a 2,4-dichloro phenyl moiety, also showed significant activity with IC₅₀ 2.03 μM and IC₉₀ 15.22 μM against the tested strain of Mtb. Furthermore, the selected hits showed no activity towards a panel of non-tuberculous mycobacteria (NTM), thus suggesting a selective inhibition of Mtb by the tested imidazo-[2,1-b]-thiazole derivatives over the selected panel of NTM. Molecular docking and dynamics studies were also carried out for the most active compounds IT06 and IT10 in order to understand the putative binding pattern, as well as stability of the protein–ligand complex, against the selected target Pantothenate synthetase of Mtb.

In the search for new anti-mycobacterial agents, we revealed the importance of imidazo-[2,1-b]-thiazole and benzo-[d]-imidazo-[2,1-b]-thiazole carboxamide derivatives.     

A multicomponent,facile and catalyst-free microwave-assisted protocol for the synthesis of pyrazolo-[3,4-b]-quinolines under green conditions

A facile, swift and ecofriendly microwave-assisted multi-component/one-pot protocol is designed for the synthesis of novel pyrazolo-[3,4-b]-quinolines at ambient temperature in aqueous ethanol as a reaction medium. The 18 novel pyrazolo-[3,4-b]-quinoline derivatives were synthesized by fusion of chosen aryl aldehyde, dimedone and 5-amino-3-methyl-1-phenylpyrazole in excellent yields (91–98%). All the molecular structures were confirmed by ¹H-NMR, ¹⁵N-NMR, ¹³C-NMR, and HRMS data analysis. Operational simplicity, easy handling, one-step simple workup procedure, mild reaction conditions, short reaction time (≤10 min), high selectivity and no by-product formation are the striking features of the protocol.

A facile, swift and ecofriendly microwave-assisted multi-component/one-pot protocol is designed for the synthesis of novel pyrazolo-[3,4-b]-quinolines at ambient temperature in aqueous ethanol as a reaction medium.     

Unusual rearrangement of imidazo[1,5-a]imidazoles and imidazo[1,2-b]pyrazoles into imidazo[1,5-a]pyrimidines and pyrazolo[1,5-a]pyrimidines

A multicomponent reaction giving easy and cheap access to a variety of bicyclic 5,5-fused hetero-rings has been developed. Then, an usual rearrangement of imidazo[1,5-a]imidazoles or imidazo[1,2-b]pyrazoles leading to bi-heterocyclic imidazo- and pyrazolo[1,5-a]pyrimidines in the presence of a specific amount of I₂ in THF at room temperature has been achieved. This new method enables the hitherto unreported synthesis of functionalized imidazo- and pyrazolo[1,5-a]pyrimidines.

A multicomponent reaction giving easy and cheap access to a variety of bicyclic 5,5-fused hetero-rings has been developed.     

Nano-[Fe3O4@SiO2/N-propyl-1-(thiophen-2-yl)ethanimine][ZnCl2] as a nano magnetite Schiff base complex and heterogeneous catalyst for the synthesis of pyrimido[4,5-b]quinolones

Nano-[Fe₃O₄@SiO₂/N-propyl-1-(thiophen-2-yl)ethanimine][ZnCl₂] as a nano magnetite Schiff base complex was designed and fully characterized by various analyses such as Fourier transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), differential thermal gravimetric analysis (DTA), vibrating sample magnetometry (VSM), scanning electron microscopy (SEM), and transmission electron micrographs (TEM). The presented nano magnetite Schiff base complex was used as a heterogeneous catalyst for the synthesis of pyrimido[4,5-b]quinolones by the reaction of aryl aldehyde, dimedone and 6-amino-1,3-dimethyluracil in EtOH : H₂O (7 : 3) as a solvent at 60 °C.

Nano-[Fe₃O₄@SiO₂/N-propyl-1-(thiophen-2-yl)ethanimine][ZnCl₂] as a nano magnetite Schiff base complex was designed and successfully tested for the synthesis of pyrimido[4,5-b]quinolones.     

One-pot multicomponent synthesis of thieno[2,3-b]indoles catalyzed by a magnetic nanoparticle-supported [Urea]4[ZnCl2] deep eutectic solvent

In this study, we have developed the synthesis of thieno[2,3-b]indole dyes via a multicomponent reaction of cheap and available reagents such as sulfur, acetophenones, and indoles using a magnetic nanoparticle-supported [Urea]₄[ZnCl₂] deep eutectic solvent as a green catalyst. The synthesis of a series of diversely functionalized thieno[2,3-b]indole has been successfully performed in a one-pot reaction. Among a total of 25 compounds synthesized, there are 21 new compounds with full characterization such as FT-IR, ¹H and ¹³C NMR, HRMS (ESI). Due to the deep eutectic solvent coated surface of the magnetic nanoparticles, the catalyst could be recovered by an external magnet and reused in five consecutive runs without a considerable decrease in catalytic activity.

We have developed the synthesis of thieno[2,3-b]indole dyes via a multicomponent reaction of cheap and available reagents using a magnetic nanoparticle-supported [Urea]₄[ZnCl₂] deep eutectic solvent as a green catalyst.     

Multisulfonate hyperbranched polyglycerol functionalized graphene oxide as an efficient reusable catalyst for green synthesis of benzo[a]pyrano-[2,3-c]phenazines under solvent-free conditions

A novel acid catalyst was prepared based on growing hyperbranched polyglycerol (HPG) on the surface of graphene oxide. Then, the hydroxyl groups of HPG on graphene oxide were functionalized by sulfonate groups to form an acid catalyst. The catalyst displayed a good loading level of acidic groups on the surface because of coating graphene oxide with HPG. This new catalyst is demonstrated to be highly effective in the preparation of benzo[a]pyrano[2,3-c]phenazine dyes.

A novel acid catalyst was prepared based on growing hyperbranched polyglycerol (HPG) on the surface of graphene oxide. Then, the hydroxyl groups of HPG on graphene oxide were functionalized by sulfonate groups to form an acid catalyst.     

On water catalyst-free synthesis of benzo[d]imidazo[2,1-b] thiazoles and novel N-alkylated 2-aminobenzo[d]oxazoles under microwave irradiation

A highly efficient unprecedented catalyst-free microwave-assisted procedure for synthesizing benzo[d]imidazo[2,1-b]thiazoles and N-alkylated 2-aminobenzo[d]oxazol in green media was developed. The transformation provided rapid access to functionalized benzo[d]imidazo[2,1-b]thiazoles from 2-aminobenzothiazole and N-alkylated 2-aminobenzo[d]oxazole from 2-aminobenzoxazole scaffolds under mild transition-metal-free conditions. This synthetic manipulation is expected to greatly expand the repertoire of reaction types in heterocyclic chemistry and pave the way for new syntheses of bioactive compounds.

A highly efficient unprecedented catalyst-free microwave-assisted procedure for synthesizing benzo[d]imidazo[2,1-b]thiazoles and N-alkylated 2-aminobenzo[d]oxazol in green media was developed.     

Titanate nanotubes-bonded organosulfonic acid as solid acid catalyst for synthesis of butyl levulinate

In this study, titanate nanotubes-bonded organosulfonic acid (TNTs–SO₃H) was prepared and employed as an efficient heterogeneous catalyst for esterification of levulinic acid with n-butanol. Two reaction products pseudo n-butyl levulinate (pseudo-BL) and n-butyl levulinate (BL) were detected by GC-MS. The catalyst showed 86.8% conversion of levulinic acid with 99.7% selectivity towards n-butyl levulinate. TNTs–SO₃H exhibited strong acidic sites and high stability even after seven cycles of usage and would be well expected to be a potential candidate for alkyl levulinate production.

TiO₂ nanotubes-bonded organosulfonic acid as a hybrid catalyst exhibited better activity and good reusability for esterification reaction.     

Anion–cation co-operative catalysis by artificial sweetener saccharine-based ionic liquid for sustainable synthesis of 3,4-dihydropyrano[c]chromenes, 4,5-dihydropyrano[4,3-b]pyran and tetrahydrobenzo[b]pyrans in aqueous medium

In this study, a saccharine-based ionic liquid [Bmim]Sac has been found to be a sustainable catalyst for the synthesis of 3,4-dihydropyrano[c]chromenes, 4,5-dihydropyrano[4,3-b]pyran and tetrahydrobenzo[b]pyrans scaffolds through Domino Knoevenagel–Michael reaction. The easy recovery of the catalyst and high yield of the products make the protocol attractive, sustainable and economical. A mechanistic hypothesis is discussed using the concept of cooperative catalysis based on the dual (electrophilic/nucleophilic) activation of reactants by [Bmim]Sac. Furthermore, dual hydrogen bonding of saccharinate anions plays an important role in the activation of nucleophiles.

Artificial sweetener saccharine based ionic for sustainable synthesis of 3,4-dihydropyrano[c]chromenes, 4,5-dihydropyrano[4,3-b]pyran and tetrahydrobenzo[b]pyrans in aqueous medium scaffolds through Domino Knoevenagel–Michael reaction.     

Aerobic,metal-free synthesis of 6H-chromeno[4,3-b]quinolin-6-ones

A Friedländer-based method for transition-metal free, aerobic synthesis of chromene-fused quinolinones is reported. The coupling of 4-hydrocoumarins and 2-aminobenzyl alcohols proceeds in the presence of acetic acid solvent and oxygen oxidant, affording 6H-chromeno[4,3-b]quinolin-6-ones in good to excellent yields. The reactions are tolerant of functionalities such as alkyl, methoxy, bromo, chloro, and N-heterocycle. Isosteric cyclic 1,3-diketones and 2-amino acetophenones also give fused quinolinones under reaction conditions. The method herein offers a rapid and benign synthesis of hitherto challenging N-heterocycles. To our best knowledge, such a convenient pathway to obtain chromene-fused quinolinones have not been known in the literature.

A Friedländer-based method for transition-metal free, aerobic synthesis of chromene-fused quinolinones is reported.     

Cycloaddition of Huisgen 1,4-dipoles: synthesis and rapid epimerization of functionalized spiropyrido[2,1-b][1,3]oxazine-pyrroles and related products

1,4-Dipolar cycloaddition has emerged as a powerful tool for the synthesis of various cyclic compounds. In the present work, 1H-pyrrole-2,3-diones are proposed as new dipolarophiles for 1,4-dipolar cycloaddition. Their [4 + 2] cycloaddition with dipoles generated from dimethyl acetylenedicarboxylate and pyridine was found to proceed regioselectively affording spiro[pyrido[2,1-b][1,3]oxazine-2,3′-pyrroles] as diastereomeric mixtures which exist in rapid equilibrium in solution. It was established that this phenomenon of rapid epimerization is a characteristic of other similar spiropyrido[2,1-b][1,3]oxazines and even related spiroquinolizines, which was demonstrated by the investigation of related products of previously reported, and reproduced in this work, 1,4-dipolar cycloaddition reactions.

Rapid epimerization of cycloadducts from Huisgen 1,4-dipoles has been investigated through the synthesis of new spiropyrido[2,1-b][1,3]oxazine-pyrroles and repetition of syntheses from the literature.     

Laser synthesis: a solvent-free approach for the preparation of phenylthiazolo[5,4-b]pyridine derivatives

We describe here a rapid and straightforward solvent-free method to access phenylthiazolo[5,4-b]pyridines using a Nd-YAG laser NANO-NY81-10 (λ = 355 nm, 10 Hz pulse frequency; 8 ns pulse duration). This newly presented method successfully brings several improvements to the laser assisted synthesis of N,S-heterocycles. We are able to provide a solvent-, metal- and base-free method with good yield and a substantial reduction in reaction time.

We describe here a rapid and straightforward solvent-free method to access phenylthiazolo[5,4-b]pyridines using a Nd-YAG laser NANO-NY81-10 (λ = 355 nm, 10 Hz pulse frequency; 8 ns pulse duration).     

Molybdenum-modified mesoporous SiO2 as an efficient Lewis acid catalyst for the acetylation of alcohols

A suitable, expeditious and well-organized approach for the acetylation of alcohols with acetic anhydride in the presence of 5%MoO₃–SiO₂ as an optimum environmentally benign heterogeneous catalyst was developed. The high surface area obtained for 5%MoO₃–SiO₂, 101 m² g⁻¹ compared to other catalysts, 22, 23, and 44 m² g⁻¹ for 5%WO₃–ZrO₂, 5%WO₃–SiO₂, and 5%MoO₃–ZrO₂, respectively, appears to be the driving force for better catalytic activity. Amongst the two dopants used, molybdenum oxide is the better dopant compared to its tungsten oxide counterpart. High yields of up to 86% were obtained with MoO₃ doping while WO₃ containing catalysts did not show any activity. Other reaction parameters such as reactor stirring speed, and solvent variation were studied and revealed that the optimum stirring speed is 400 rpm and cyclohexane is the best solvent. Thus, the utilization of affordable and nontoxic materials, short reaction times, reusability, and producibility of excellent yields of the desired products are the advantages of this procedure.

A suitable, expeditious and well-organized approach for the acetylation of alcohols with acetic anhydride in the presence of 5%MoO₃–SiO₂ as an optimum environmentally benign heterogeneous catalyst was developed.