Encapsulation and controlled release of recombinant human erythropoietin from chitosan-carrageenan nanoparticles

Novel chitosan-carrageenan nanoparticles were produced through the process of ionotropic gelation for the encapsulation and controlled release of recombinant human erythropoietin (rHu-EPO). The effects of chitosan concentration, chitosan to carrageenan mass ratio and solution pH on the nanoparticle diameter, polydispersity and surface charge were explored through both screening and response surface modeling (RSM) methods. The chitosan-carrageenan nanoparticles created had particle diameters between 200 and 1000nm, surfaces charges between 40 and 55mV, and polydispersity between 0.2 and 0.35. RSM optimized chitosan-carrageenan nanoparticles demonstrated an increased rHu-EPO encapsulation efficiency of 47.97?4.10% and a more sustained in vitro release of ~50% over a 2 week period when compared to previous nano/microparticle delivery systems. Studies on the effect of surface charge and chitosan molecular weight on the encapsulation and controlled release of rHu-EPO revealed that increasing either led to improved encapsulation efficiency and reduced release rate.     

Chitosan-sodium alginate nanoparticles as submicroscopic reservoirs for ocular delivery: formulation, optimisation and in vitro characterisation.

Management of extraocular disease is mainly limited by the inability to provide long-term extraocular drug delivery without avoiding the systemic drug exposure and/or affecting the intraocular structures and poor availability of drugs, which may be overcome by prolonging the contact time with the ocular surface, for instance with bioadhesive polymers. In the present study, mucoadhesive chitosan (CS)-sodium alginate (ALG) nanoparticles were investigated as a new vehicle for the prolonged topical ophthalmic delivery of antibiotic, gatifloxacin. A modified coacervation or ionotropic gelation method was used to produce gatifloxacin-loaded submicroscopic nanoreservoir systems. It was optimised using design of experiments by employing a 3-factor, 3-level Box-Behnken statistical design. Independent variables studied were the amount of the bioadhesive polymers: CS, ALG and the amount of drug in the formulation. The dependent variables were the particle size, zetapotential, encapsulation efficiency and burst release. Response surface plots were drawn, statistical validity of the polynomials was established and optimised formulations were selected by feasibility and grid search. Nanoparticles were characterised by FT-IR, DSC, TEM and atomic force microscopy. Drug content, encapsulation efficiency and particle properties such as size, size distribution (polydispersity index) and zetapotential were determined. The designed nanoparticles have average particle size from 205 to 572 nm (polydispersity from 0.325 to 0.489) and zetapotential from 17.6 to 47.8 mV. Nanoparticles revealed a fast release during the first hour followed by a more gradual drug release during a 24-h period following a non-Fickian diffusion process. Box-Behnken experimental design thus facilitated the optimisation of mucoadhesive nanoparticulate carrier systems for prolonged ocular delivery of the drug.     

Combination of a chemopreventive agent and paclitaxel in CD44-targeted hybrid nanoparticles for breast cancer treatment

The CD44 receptor, which is upregulated in many cancer cells, provides a selective cellular surface for targeted drug delivery systems. We developed a hybrid nanocarrier for the CD44-targeted delivery of ibuprofen (IBU) and paclitaxel (PTX). The solid lipid nanoparticles (SLNs) were prepared by a hot-melt oil/water emulsion technique and then coated with hyaluronic acid (HA) by electrostatic interactions. The final SLN were spherical with a hydrodynamic diameter (Z) of 72.16 ± 2.9 nm, polydispersity index (PDI) of 0.276 ± 0.009, and zeta potential (ZP) of 28.20 ± 0.69 mV. Similarly, SLN coated with HA (SLN-HA) exhibited acceptable physical properties (Z 169.3 ± 0.55 nm, PDI 0.285 ± 0.004, and ZP ? 10.5 ± 0.15 mV). Cell viability assays showed that the combination of IBU, a chemopreventive agent, and PTX exerted a synergistic inhibitory effect on the proliferation of cancer cells (CI < 1.0). Additionally, our observations indicated that both SLN and SLN-HA enhanced apoptosis and cellular uptake compared to the cocktail of free drugs. HA indicated its affinity for cancer cells through the improvement of cellular uptake and induction of apoptosis. These results clearly indicated that these nanoparticle systems hold great promise for drug delivery in breast cancer treatment.     

Formulation and characterization of amphotericin B-chitosan-dextran sulfate nanoparticles

A new nanoparticulate delivery system for amphotericin B (AmB) has been developed by means of the polyelectrolyte complexation technique. Two opposite charged polymers were used to form nanoparticles through electrostatic interaction, chitosan (CH) as a positively charged polymer and dextran sulfate (DS) as a polymer with a negative charge, together with zinc sulfate as a crosslinking and hardening agent. The AmB nanoparticles obtained possessed a mean particle size of 600-800 nm with a polydispersity index of 0.2, indicating a narrow size distribution. The measured zeta potential of the nanoparticle surface was approximately -32 mV indicating a strong negative charge at the particle's surface. Scanning electron microscopy revealed spherical particles with a smooth surface. Drug association efficacy of up to 65% was achieved. Dissolution studies demonstrated a fast release behavior suggesting that AmB exhibits only moderate interaction with the weakly crosslinked polymers of the nanoparticles. Although, electronic absorbance spectra showed that the aggregation state of AmB was modified within the nanoparticles, a reduction of nephrotoxicity was observed in an in vivo renal toxicity study.     

Development and characterization of PLGA nanospheres and nanocapsules containing xanthone and 3-methoxyxanthone.

The aim of the present work was to develop and characterize two different nanosystems, nanospheres and nanocapsules, containing either xanthone (XAN) or 3-methoxyxanthone (3-MeOXAN), with the final goal of improving the delivery of these poorly water-soluble compounds. The xanthones-loaded nanospheres (nanomatrix systems) and nanocapsules (nanoreservoir systems), made of poly(DL-lactide-co-glycolide) (PLGA), were prepared by the solvent displacement technique. The following characteristics of nanoparticle formulations were determined: particle size and morphology, zeta potential, incorporation efficiency, thermal behaviour, in vitro release profiles and physical stability at 4 degrees C. The nanospheres had a mean diameter <170 nm, a narrow size distribution (polydispersity index <0.1), and a negative surface charge (zeta potential <-36 mV). Their incorporation efficiencies were 33% for XAN and 42% for 3-MeOXAN. The presence of the xanthones did not affect the nanospheres size and zeta potential. DSC studies indicated that XAN and 3-MeOXAN were dispersed at a molecular level within the polymeric nanomatrix. Nanocapsules were also nanometric (mean size <300 nm) and exhibited a negative charge (zeta potential <-36 mV). Their incorporation efficiency values (>77%) were higher than those corresponding to nanospheres for both xanthones. The release of 3-MeOXAN from nanocapsules was similar to that observed for the correspondent nanoemulsion, indicating that drug release is mainly governed by its partition between the oil core and the external aqueous medium. In contrast, the release of XAN from nanocapsules was significantly slower than from the nanoemulsion, a behaviour that suggests an interaction of the drug with the polymer. Nanocapsule formulations exhibited good physical stability at 4 degrees C during a 4-month period for XAN and during a 3-month period for 3-MeOXAN.     

Role of nanotechnology in pharmaceutical product development

A number of new molecular entities (NMEs) selected for full-scale development based on their safety and pharmacological data suffer from undesirable physicochemical and biopharmaceutical properties, which lead to poor pharmacokinetics and distribution after in vivo administration. An optimization of the preformulation studies to develop a dosage form with proper drug delivery system to achieve desirable pharmacokinetic and toxicological properties can aid in the accelerated development of these NMEs into therapies. Nanoparticulate drug delivery systems show a promising approach to obtain desirable druglike properties by altering the biopharmaceutics and pharmacokinetics properties of the molecule. Apart from the advantages of enhancing potential for systemic administration, nanoparticulate drug delivery systems can also be used for site-specific delivery, thus alleviating unwanted toxicity due to nonspecific distribution, improve patient compliance, and provide favorable clinical outcomes. This review summarizes some of the parameters and approaches that can be used to evaluate nanoparticulate drug delivery systems in early stages of formulation development.     

Microneedle mediated delivery of nanoparticles into human skin

The development of novel cutaneous delivery technologies that can produce micron-sized channels within the outermost skin layers has stimulated interest in the skin as an interface for localised and systemic delivery of macromolecular and nanoparticulate therapeutics. This investigation assesses the contribution of physicochemical factors to the rate and extent of nanoparticle delivery through microchannels created in a biological tissue, the skin, by novel delivery technologies such as the microneedle array. The hydrodynamic diameter, zeta potential and surface morphology of a representative fluorescent nanoparticle formulation were characterised. Permeation studies using static Franz-type diffusion cells assessed (i) the diffusion of nanoparticle formulations through a model membrane containing uniform cylindrical microchannels of variable diameter and (ii) nanoparticle penetration across microneedle treated human skin. Wet-etch microneedle array devices can be used to significantly enhance the intra/transdermal delivery of nanoparticle formulations. However the physicochemical factors, microchannel size and particle surface charge, have a significant influence on the permeation and subsequent distribution of a nanoparticle formulation within the skin. Further work is required to understand the behaviour of nanoparticle formulations within the biological environment and their interaction with the skin layers following disruption of the skin barrier with novel delivery devices such as the microneedle array.     

The influence of pulmonary surfactant on nanoparticulate drug delivery systems

The pulmonary route is very attractive for drug delivery by inhalation. In this regard, nanoparticulate drug delivery systems, designed as multifunctional engineered nanoparticles, are very promising since they combine several opportunities like a rather uniform distribution of drug dose among all ventilated alveoli allowing for uniform cellular drug internalization. However, although the field of nanomedicine offers multiple opportunities, it still is in its infancy and the research has to proceed in order to obtain a specific targeting of the drug combined with minimum side effects. If inhaled nanoparticulate drug delivery systems are deposited on the pulmonary surfactant, they come into contact with phospholipids and surfactant proteins. It is highly likely that the interaction of nanoparticulate drug delivery systems with surfactant phospholipids and proteins will be able to mediate/modulate the further fate of this specific drug delivery system. In the present comment, we discuss the potential interactions of nanoparticulate drug delivery systems with pulmonary surfactant as well as the potential consequences of this interaction.     

Size and surface charge of gold nanoparticles determine absorption across intestinal barriers and accumulation in secondary target organs after oral administration

It is of urgent need to identify the exact physico-chemical characteristics which allow maximum uptake and accumulation in secondary target organs of nanoparticulate drug delivery systems after oral ingestion. We administered radiolabelled gold nanoparticles in different sizes (1.4-200 nm) with negative surface charge and 2.8 nm nanoparticles with opposite surface charges by intra-oesophageal instillation into healthy adult female rats. The quantitative amount of the particles in organs, tissues and excrements was measured after 24 h by gamma-spectroscopy. The highest accumulation in secondary organs was mostly found for 1.4 nm particles; the negatively charged particles were accumulated mostly more than positively charged particles. Importantly, 18 nm particles show a higher accumulation in brain and heart compared to other sized particles. No general rule accumulation can be made so far. Therefore, specialized drug delivery systems via the oral route have to be individually designed, depending on the respective target organ.     

PEGylated thermo-sensitive poly(amidoamine) dendritic drug delivery systems

Development of efficient ocular delivery nanosystems remains a major challenge to achieve sustained therapeutic effect. The purpose of this work was to develop chitosan nanoparticles using sulfobutylether-β-cyclodextrin (SBE-β-CD) as polyanionic crosslinker and to investigate the potential of using those nanostructures as ocular drug delivery systems. Econazole nitrate (ECO) was chosen as model drug molecule. The influence of different process variables (chitosan molecular weight and the concentration of the two ionic agents) on particle size, polydispersity index, zeta potential, drug content, in vitro release and mucoadhesive properties was investigated. The results showed that the prepared nanoparticles were predominant spherical in shape having average particle diameter from 90 to 673 nm with positive zeta potential values from 22 to 33 mV and drug content values ranging from 13 to 45%. Drug release from optimized nanoparticles was controlled with approximately 50% of the original amount released over a 8h period. The release profile of nanoparticles followed a zero-order release kinetics. The optimized nanoparticles were tested for their use as ocular drug delivery systems on albino rabbits. The in vivo studies revealed that the prepared mucoadhesive nanoparticles had better ability in sustaining the antifungal effect of ECO than the ECO solution. Therefore, chitosan/SBE-β-CD nanoparticles developed showed a promising carrier for controlled delivery of drug to the eye.     

Preparation and characterization of insulin-loaded bioadhesive PLGA nanoparticles for oral administration

Poly(D,L-lactide-co-glycolide) nanoparticles (PLGA-NP) have been extensively used as a drug delivery system for proteins and peptides. However, their negative surface charge decreases bioavailability under oral administration. Recently, cationically modified PLGA-NP has been introduced as novel carriers for oral delivery. The characteristics of the nanoparticles, such as particle size, surface charge, and bioadhesion are considered the most significant determinants of the effect of these nanoparticles both in vitro and in vivo. Our aim was to introduce and evaluate the physiochemical characteristics, bioadhesion, and biological activity of positively charged chitosan-coated PLGA-NP (CS-PLGA-NP), using insulin as a model drug. Results were compared to those of common negatively charged PLGA-NP and the in vitro cytotoxicity of the two types of nanoparticles was examined. These results indicate that both CS-PLGA-NP and PLGA-NP had a narrow size distribution, averaging less than 150 nm. CS-PLGA-NP was positively charged (+43.1 ± 0.3 mV), exhibiting the cationic nature of chitosan, whereas PLGA-NP showed a negative surface charge (-1.72 ± 0.2 mV). CS-PLGA-NP exhibited stronger bioadhesive potency than PLGA-NP and much greater relative pharmacological availability with regard to orally delivered insulin. In addition, an evaluation of cytotoxicity by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay showed no increase in toxicity in either kind of nanoparticle during the formulation process. The study proves that CS-PLGA-NP can be used as a vector in oral drug delivery systems for proteins and peptides due to its positive surface charge and bioadhesive properties.     

Penetratin-functionalized PEG-PLA nanoparticles for brain drug delivery

Nanoparticulate drug delivery system possesses distinct advantages for brain drug delivery. However, its amount that reach the brain is still not satisfied. Cell-penetrating peptides (CPPs), short peptides that facilitate cellular uptake of various molecular cargo, would be appropriate candidates for facilitating brain delivery of nanoparticles. However, such effect could be deprived by the rapid systemic clearance of CPPs-functionalized nanoparticles due to their positive surface charge. Penetratin (CPP with relatively low content of basic amino acids) was here functionalized to poly(ethylene glycol)-poly(lactic acid) nanoparticles (NP) to achieve desirable pharmacokinetic and biodistribution profiles for brain drug delivery. The obtained penetratin-NP showed a particle size of 100nm and zeta potential of -4.42mV. The surface conjugation of penetratin was confirmed by surface chemical compositions analysis via X-ray photo electron spectroscopy. In MDCK-MDR cell model, penetratin-NP presented enhanced cellular accumulation via both lipid raft-mediated endocytosis and direct translocation processes with the involvement of Golgi apparatus, lysosome and microtubules. In vivo pharmacokinetic and biodistribution studies showed that penetratin-NP exhibited a significantly enhanced brain uptake and reduced accumulation in the non-target tissues compared with low-molecular-weight protamine (CPP with high arginine content)-functionalized nanoparticles. These data strongly implicated that penetratin-NP might represent a promising brain-targeting drug delivery system. The findings also provided an important basis for the optimization of brain drug delivery systems via surface charge modulation.     

Development, characterization, and toxicity evaluation of amphotericin B-loaded gelatin nanoparticles

Our aim in the present investigation was to develop a nanoparticulate carrier of amphotericin B (AmB) for controlled delivery as well as reduced toxicity. Nanoparticles of different gelatins (GNPs) (type A or B) were prepared by two-step desolvation method and optimized for temperature, pH, amount of cross-linker, and theoretical drug loading. AmB-loaded GNPs were characterized for size, polydispersity index (PI), shape, morphology, surface charge, drug release, and hemolysis. The developed GNPs (GNP(A300)) were found to be of nanometric size (213 +/- 10 nm), having low PI (0.092 +/- 0.015) and good entrapment efficiency (49.0 +/- 2.9%). All GNPs showed biphasic release characterized by an initial burst followed by controlled release. The in vivo hematological toxicity results suggest nonsignificant reduction (P > .05) in hemoglobin concentration and hematocrit. Nephrotoxicity results showed that there was a nonsignificant (P > .05) increase in blood urea nitrogen and serum creatinine levels. The results confirm that developed GNPs could optimize AmB delivery in terms of cost and safety, and type A gelatin with bloom number 300 was found suitable for such preparation.     

HSA nanocapsules functionalized with monoclonal antibodies for targeted drug delivery

The chronic autoimmune disorder rheumatoid arthritis (RA) affects millions of adults and children every year. Chronically activated macrophages secreting enzymes and inflammatory cytokines play a key role in RA. Distinctive marker molecules on the macrophage surface could be used to design a targeted drug delivery device for the treatment of RA without affecting healthy cells and tissues. Here, different methods for covalent attachment of antibodies (mAb) recognizing MHC class II molecules found on macrophages onto human serum albumin (HSA) nanocapsules were compared. HSA nanocapsules were prepared with a hydrodynamic diameter of 500.7 ± 9.4 nm and a narrow size distribution as indicated by a polydispersity index (PDI) of 0.255 ± 0.024. This was achieved by using a sonochemical process avoiding toxic cross linking agents and emulsifiers. Covalent binding of mAb on the surface of HSA nanocapsules was realized using polyethyleneglycol (PEG)₃₀₀₀ as spacer molecule. The presence of mAb was confirmed by confocal laser scanning microscopy (CLSM) and enzyme-linked immunosorbent assay (ELISA). Specific binding of mAb-HSA nanocapsules to MHC class II molecules on antigen-presenting cells was demonstrated by flow cytometry analysis.     

Preparation and in vitro evaluation of thienorphine-loaded PLGA nanoparticles

Poly (d,l-lactic-co-glycolide) nanoparticles (PLGA-NPs) have attracted considerable interest as new delivery vehicles for small molecules, with the potential to overcome issue such as poor drug solubility and cell permeability. However, their negative surface charge decreases bioavailability under oral administration. Recently, cationically modified PLGA-NPs has been introduced as novel carriers for oral delivery. In this study, our aim was to introduce and evaluate the physiochemical characteristics and bioadhesion of positively charged chitosan-coated PLGA-NPs (CS-PLGA-NPs), using thienorphine as a model drug. These results indicated that both CS-PLGA-NPs and PLGA-NPs had a narrow size distribution, averaging less than 130?nm. CS-PLGA-NPs was positively charged (+42.1?±?0.4?mV), exhibiting the cationic nature of chitosan, whereas PLGA-NPs showed a negative surface charge (?2.01?±?0.3?mV). CS-PLGA-NPs exhibited stronger bioadhesive potency than PLGA-NPs. Furthermore, the transport of thienorphine-CS-PLGA-NPs by Caco-2 cells was higher than thienorphine-PLGA-NPs or thienorphine solution. CS-PLGA-NPs were also found to significantly enhance cellular uptake compared with PLGA-NPs on Caco-2 cells. An evaluation of cytotoxicity showed no increase in toxicity in either kind of nanoparticles during the formulation process. The study proves that CS-PLGA-NPs can be used as a vector in oral drug delivery systems for thienorphine due to its positive surface charge and bioadhesive properties.     

Hydrophilic coating of mitotane-loaded lipid nanoparticles: Preliminary studies for mucosal adhesion

The aim of the present work was to load mitotane, an effective drug for adrenocortical carcinoma treatment, in solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC). The SLN and NLC were successfully prepared by high shear homogenization followed by hot high pressure homogenization. Formulations were composed of cetyl palmitate as the solid lipid for SLN, whereas for NLC PEGylated stearic acid was selected as solid lipid and medium chain triacylglycerols as the liquid lipid. Tween® 80 and Span® 85 were used as surfactants for all formulations. The particle size, zeta potential, polydispersity index (PI), encapsulation efficiency (EE), and loading capacity (LC) were evaluated. The SLN showed a mean particle size of 150?nm, PI of 0.20, and surface charge ?10 mV, and the EE and LC could reach up to 92.26% and 0.92%, respectively. The NLC were obtained with a mean particle size of 250?nm, PI of 0.30, zeta potential ?15 mV and 84.50% EE, and 0.84% LC, respectively. Hydrophilic coating of SLN with chitosan or benzalkonium chloride was effective in changing zeta potential from negative to positive values. The results suggest that mitotane was efficiently loaded in SLN and in NLC, being potential delivery systems for improving mitotane LC and controlled drug release.     

Assessing the physical–chemical properties and stability of dapivirine-loaded polymeric nanoparticles

Nanocarriers may provide interesting delivery platforms for microbicide drugs and their characterization should be addressed early in development. Differently surface-engineered dapivirine-loaded, poly(epsilon-caprolactone) (PCL)-based nanoparticles (NPs) were obtained by nanoprecipitation using polyethylene oxide (PEO), sodium lauryl sulfate (SLS), or cetyltrimethylammonium bromide (CTAB) as surface modifiers. Physical–chemical properties of NP aqueous dispersions were evaluated upon storage at −20–40 °C for one year. NPs presented 170–200 nm in diameter, roundish-shape, low polydispersity index (≤0.18), and high drug association efficiency (≥97%) and loading (≥12.7%). NPs differed in zeta potential, depending on surface modifier (PEO: −27.9 mV; SLS: −54.7 mV; CTAB: +42.4 mV). No interactions among formulation components were detected by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR), except for SLS–PCL NPs. Colloidal properties of NPs were lost at −20 °C storage. Negatively charged NPs were stable up to one year at 5–40 °C; as for CTAB–PCL NPs, particle aggregation was observed from 30 to 90 days of storage depending on temperature. Colloidal instability affected the in vitro drug release of CTAB–PCL NPs after 360 days. In any case, no degradation of dapivirine was apparent. Overall, PEO–PCL and SLS–PCL NPs presented suitable properties as nanocarriers for dapivirine. Conversely, CTAB–PCL NPs require additional strategies in order to increase stability.     

Future of nanomedicines for treating respiratory diseases

Introduction: Nanoparticles are under discussion in drug delivery for more than 20 years now, but examples for nanoparticulate formulations in the treatment of respiratory diseases are rare and mostly limited to the administration of sub-micron drug particles (ultrafine particles). However, nanoparticles may also carry specific benefits for respiratory treatment. Are nanoparticles the next-generation drug carrier system to facilitate systemic delivery, sustained release and cancer treatment in the lungs?

Areas covered: This review will look into the promises and opportunities of the use of nanoparticles in the treatment of respiratory diseases. Important aspects to discuss are the fate of nanoparticles in the lung and mechanisms for reproducible delivery of nanoparticulate formulations to the lungs. Examples are given where nanoparticles may be advantageous over for traditional formulations and further aspects to explore are mentioned.

Expert opinion: The benefit of nanoparticulate systems for respiratory delivery adds to the portfolio of possible formulation strategies, depends on the intended functionality and needs more exploration. Advantages of such systems are only seen in special cases.     

Release of DNA from dendriplexes encapsulated in PLGA nanoparticles

Biodegradable PLGA particles of less than 1 microm can encapsulate DNA and DNA-dendron complexes (dendriplexes) providing sustained DNA release for transfecting cells in gene delivery. Two polylysine-based dendrons prepared by solid state peptide synthesis were used to condense pRedN-1 DNA (7.5 kbp), a fluorescent protein vector. The dendrons had 16 free surface amino groups attached to seven lysine groups, bound to a lipid core, one containing three C18 chains and the other a single C10 chain. Increased lipophilicity and molar charge ratios are key factors in producing compact and reproducible dendriplexes, shown by the hydrodynamic diameter which is of the order of 800 nm (p.d.>0.5) at a 2:1 molar charge ratio, a value which decreases to around 200 nm at a 5:1 charge ratio. At lower charge ratios the dendriplexes are negative and have a zeta potential in order of -18 mV. As the ratio increases (5:1, 10:1) the complexes bear a positive potential (13+/-2 mV). This suggests that at the 2:1 ratio the DNA is not fully condensed. The DNA was radiolabelled with 35S dCTP (deoxycytidinetriphosphate) with the removal of the un-incorporated radiolabelled nucleotides. The encapsulation efficiency of dendriplexes in PLGA particles is higher than that for uncomplexed DNA. When the results are normalised for DNA content and particle surface area, complexation of the DNA was found to decrease release rate.     

Magnetic resonance imaging of contrast-enhanced polyelectrolyte complexes

Polyelectrolyte complexes (PECs) assembled from oppositely charged polymers were endowed with gadolinium (Gd) and evaluated to determine cytotoxicity and magnetic resonance image (MRI) contrast enhancement in vivo. Chitosan grafted with Gd diethylenetriaminepentaacetic acid (DTPA) was electrostatically complexed with dextran sulfate, producing particles of about 300 nm possessing a negative surface charge. Alternatively, Gd was ionically trapped within PECs by mixing PECs (with or without Gd-DTPA graft) with gadolinium chloride (GdCl(3)). Combinations of these two approaches for including Gd resulted in three particle types: Gd-loaded PECs, Gd-DTPA-conjugated PECs, and PECs containing both ionically trapped Gd and Gd-DTPA grafts. Polyelectrolytes, Gd-DTPA, and PECs were all found to have relatively low cytotoxicity (IC(50) > 1 mg/mL) in human umbilical cord vascular endothelial cells. In vivo, MRI revealed that the contrast-enhanced PECs were found to accumulate rapidly in the rat kidney. Some accumulation was also noted in the rat liver; however, negligible enhancement occurred in other tissues. Contrast enhancement was especially intense in or near the renal pelvis. MRI detection of PECs provides a potential approach to rapidly evaluate parameters such as the biodistribution and pharmacokinetics of these established drug and gene delivery vehicles.