Effects of placement angle and direction of orthopedic force application on the stability of orthodontic miniscrews

Objectives:To evaluate the influence of placement angle and direction of orthopedic force application on the stability of miniscrews.Materials and Methods:Finite element analysis was performed using miniscrews inserted into supporting bone at angles of 90°, 60°, and 30° (P90°, P60°, and P30°). An orthopedic heavy force of 800 gf was applied to the heads of the miniscrews in four upward (U0°, U30°, U60°, U90°) or lateral (L0°, L30°, L60°, L90°) directions. In addition, pull-out strength of the miniscrews was measured with various force directions and cortical bone thicknesses.Results:Miniscrews with a placement angle of 30° (P30°) and 60° (P60°) showed a significant increase in maximum von Mises stress following the increase in lateral force vectors (U30°, U60°, U90°) compared to those with a placement angle of 90° (P90°). In accordance, the pull-out strength was higher with the axial upward force when compared to the upward force with lateral vectors. Maximum von Mises stress and displacement of the miniscrew increased as the angle of lateral force increased (L30°, L60°, L90°). However, a more dramatic increase in maximum von Mises stress was noted in P30° than in P60° and P90°.Conclusion:Placement of the miniscrew perpendicular to the cortical bone is advantageous in terms of biomechanical stability. Placement angles of less than 60° can reduce the stability of miniscrews when orthopedic forces are applied in various directions.     

A comparison of treatment effects of total arch distalization using modified C-palatal plate vs buccal miniscrews

Objective:The purpose of this study was to compare the treatment effects of palatally vs buccally placed temporary anchorage devices.Materials and Methods:Of 40 Class II division 1 malocclusion patients, 22 were treated with modified C-palatal plate (MCPP) appliances (age 21.9 ± 6.6 years), and 18 (age 24.2 ± 6.8 years) were treated with buccally placed miniscrews between the maxillary first molar and second premolar. A total of 26 linear and angular measurements were analyzed on pre- and posttreatment lateral cephalograms. Multivariate analysis of variance was performed to evaluate the treatment effects within each group and to compare the effects between groups.Results:Overall, the MCPP appliances showed 4.2 mm of distalization, 1.6 mm of intrusion of the first molar with 2° tipping, and 0.8 mm extrusion of incisors. The miniscrew group resulted in 2.0 mm of distalization, 0.1 mm intrusion of the first molar with 7.2° tipping, and 0.3 mm of incisor extrusion. Regarding soft tissue change, in the MCPP group, the upper lip was significantly retracted (P < .001).Conclusions:Comparing the treatment effects between MCPP appliances and buccal miniscrews, the MCPP appliances showed greater distalization and intrusion with less distal tipping of the first molar and more extrusion of the incisor compared to the buccal miniscrews.     

Locating the center of resistance of maxillary anterior teeth retracted by Double J Retractor with palatal miniscrews

Objective:To locate the center of resistance of six maxillary anterior teeth retracted by the Double J Retractor (DJR) and to find the optimal position of palatal miniscrews.Materials and Methods:The three-dimensional (3D) finite element model included 12 teeth with two first premolars extracted. The DJR was modeled as a 3D beam element. The miniscrew was sagittally placed between the second premolar and the first molar, and the vertical position of the miniscrew was established at five conditions: 6, 7, 8, 9, and 10 mm apically from the cervical line of the first molar. The length of the retraction lever arm was determined according to the position of the miniscrew, for the direction of retraction force to be parallel to the maxillary occlusal plane. The 3D finite element method was used to determine the location of the center of resistance of the maxillary anterior teeth by visualizing the tooth displacement and stress distribution.Results:As the miniscrew was located apically, the stress spread out to the root apex and the adjacent alveolar bone. At the 8-mm level of miniscrews, a bodily-like parallel retraction could be obtained with DJR.Conclusion:In this study, the center of resistance of the six maxillary anterior teeth retracted by DJR with palatal miniscrews was estimated to be 12.2 mm apically from the incisal edge of the central incisor.     

Accuracy of orthodontic miniscrew implantation guided by stereolithographic surgical stent based on cone-beam CT–derived 3D images

Objective:To develop surgical stents for cone-beam computed tomography (CBCT) 3-dimensional (3D) image-based stent-guided orthodontic miniscrew implantation and to evaluate its accuracy.Materials and Methods:Ten surgical stents were fabricated with stereolithographic appliances (SLAs) according to 3D CBCT image-based virtual implantation plans. Thirty self-drilling miniscrews were implanted at two to three positions on each side of the maxillary or mandibular posterior arches in three phantoms: 20 guided by 10 surgical stents in two phantoms (stent group) and 10 guided freehand in one phantom (freehand group). Six parameters (mesiodistal and vertical deviations at the corona and apex and mesiodistal and vertical angular deviations) were measured to compare variations between the groups.Results:No root damage was found in the stent group, whereas four of 10 miniscrews contacted with roots in the freehand group. In the stent group, deviations in the mesiodistal and vertical directions were 0.15 ± 0.09 and 0.19 ± 0.19 mm at the corona, respectively, and 0.28 ± 0.23 and 0.33 ± 0.25 mm at the apex, respectively; angular deviations in the mesiodistal and vertical directions were 1.47° ± 0.92° and 2.13° ± 1.48°, respectively. In the freehand group, the corresponding results were 0.48 ± 0.46 mm and 0.94 ± 0.87 mm (corona), 0.81 ± 0.61 mm and 0.78 ± 0.49 mm (apex), and 7.49° ± 6.09° and 6.31° ± 3.82°. Significant differences were found in all six parameters between the two groups (Student''s t-test, P < .05).Conclusions:3D CBCT image-based SLA-fabricated surgical stents can provide a safe and accurate method for miniscrew implantation.     

Anchorage control using miniscrews in comparison to Essix appliance in treatment of postpubertal patients with Class II malocclusion using Carrière Motion Appliance:: A randomized clinical trial

ObjectivesTo evaluate anchorage control using miniscrews vs an Essix appliance in treatment of Class II malocclusion by distalization using the Carrière Motion Appliance (CMA).Materials and MethodsTwenty-four postpubertal female patients with Class II, division 1 malocclusion were randomly distributed into two equal groups. CMA was bonded in both groups, and one group was treated with miniscrews as anchorage (12 patients, mean age = 18.0 years) while the other group was treated with an Essix appliance as anchorage (12 patients, mean age = 17.8 years). For each patient, two cone-beam computed tomographic scans were obtained: one preoperatively and another after completion of distalization.ResultsIn the Essix appliance group, there was a statistically significant anterior movement (2.2 ± 1.43 mm) as well as proclination of the lower incisor (5.3° ± 4.0°), compared to a nonsignificant anterior movement (0.06 ± 1.45 mm) and proclination (0.86° ± 2.22°) in the miniscrew group. The amount of maxillary molar distalization was higher in the miniscrew group (2.57 ± 1.52 mm) than in the Essix appliance group (1.53 ± 1.11 mm); however, the difference was not statistically significant.ConclusionsMiniscrews led to a decrease in the amount of anchorage loss in the mandibular incisors, both in terms of anterior movement and proclination.     

Three-dimensional evaluation of hybrid expander appliances: A pilot study

Objective:To evaluate transverse dimensional changes in dentoalveolar and skeletal structures caused by hybrid expander, using cone-beam computed tomography (CBCT).Materials and Methods:The CBCT records of nine patients (five boys and four girls) (mean age 13.61 ± 0.72 years) treated with hybrid expander were examined. CBCT images were taken at pretreatment and after the expansion. ELSA (point equidistant to both foramina spinosa) was determined as a reference point to compare the distances in all three dimensions. Nineteen transversal dimensions and four angles were measured for both right and left sides. Wilcoxon signed rank test was used for statistical comparison at P < .05 levels.Results:A V-shaped expansion of suture was successfully achieved in all patients without teeth support. The amount of opening was greater in anterior than posterior and in inferior than superior. An 8.75-mm screw expansion was achieved for all patients. Expansion effects reverberated to maxillary central incisor, canine, first premolar, and first molar at 70%, 75%, 92%, and 89%, respectively. The molar teeth tipped buccally (right 3.06° and left 3.24°) as did premolars (right 2.88° and left 3.02°).Conclusion:The hybrid expander, minimally invasive expansion appliance that protects teeth by including bone support, can be used easily for rapid maxillary expansion treatment.     

A study of interleukin 1β levels in peri-miniscrew crevicular fluid (PMCF)

Background

This study provides a vital insight in assessing the clinical and biochemical changes in interleukin (IL)-1β levels in peri-miniscrew crevicular fluid (PMCF) during the course of orthodontic tooth movement.

Methods

The study comprised the analysis of IL-1β in peri-miniscrew crevicular fluid obtained from crevices around the miniscrews inserted in 11 patients (eight females and three males, mean age 17.3 ± 4.64 years) with all first premolar extraction and maximum anchorage requirement using miniscrew-supported anchorage. Miniscrews were loaded at 3 weeks after placement by 200-g nitinol closed coil springs of 9-mm length for en masse retraction. Peri-miniscrew crevicular fluid was collected at miniscrew placement (T1), at 3 weeks (T2/baseline) and on loading at 0 (T3) and 1 day (T4), 21 (T5), 72 (T6), 120 (T7), 180 (T8) and 300 (T9) days. IL-1β levels were estimated by enzyme-linked immunosorbent assay (ELISA). Peri-miniscrew tissue was examined for signs of inflammation, and also, miniscrew mobility was assessed with Periotest and handles of two mouth mirrors.

Results

IL-1β levels in all miniscrews were significantly higher at T1 and peaked again at T4 showing a bimodal peak. However, there was a gradual and statistically significant decrease in IL-1β till T5, while further changes till the end of the study were statistically not significant.

Conclusions

The changing levels of IL-1β levels in PMCF over a duration of 300 days are suggestive of the underlying inflammatory process. IL-1β levels in PMCF show a significant rise during miniscrew insertion and on immediate loading. The trend of gradually reducing IL-1β levels around the miniscrew over the period after loading towards baseline is suggestive of adaptive bone response to stimulus.     

Skeletal and dentoalveolar effects of slow vs rapid activation protocols of miniscrew-supported maxillary expanders in adolescents: A randomized clinical trial

ObjectivesTo compare between skeletal and dentoalveolar effects of slow and rapid activation of miniscrew-supported expanders.Materials and MethodsA total of 30 patients were randomly allocated to two groups using block randomization and the allocation ratio 1:1. Both groups received maxillary expanders anchored using four miniscrews. Activation protocol was once every other day in the slow expansion (SME) group and twice daily in the rapid expansion (RME) group. Cone-beam computed tomography (CBCT) scans were obtained before expansion and after removal of the expanders. Transverse skeletal and dentoalveolar changes were measured using CBCT.ResultsA total of 12 patients in the SME group (mean age, 14.30 ± 1.37 years) and 12 patients in the RME group (mean age, 15.07 ± 1.59 years) were analyzed. RME showed significantly greater widening of the mid-palatal suture at the level of first molars (mean difference [SME − RME] = −0.61 mm), and a greater increase in right and left molar buccal inclination (mean difference= −3.83° and −2.03°, respectively). Percentage of skeletal expansion relative to the jackscrew opening was not significantly different between the groups. Palatal inflammation was evident following appliance removal. Miniscrew mobility and bending were observed with RME.ConclusionsBoth SME and RME were effective in correcting skeletal transverse maxillary deficiency. However, RME resulted in more buccal tipping of maxillary molars and in miniscrew failures and bending.     

Treatment outcomes of Class II malocclusion cases treated with miniscrew-anchored Forsus Fatigue Resistant Device: A randomized controlled trial

Objective:To evaluate the skeletal, dental, and soft tissue effects of the Forsus Fatigue Resistant Device (FRD) used with miniscrew anchorage and compare them with those of the conventional Forsus FRD.Materials and Methods:This study was carried out on 38 patients. These patients were randomly allocated into three groups. The 14 patients in group 1 (aged 12.76 ± 1.0 years) were treated with the FRD appliance. In group 2, the 15 patients (aged 12.52 ± 1.12 years) received treatment with FRD using miniscrew anchorage, and the 9 patients in group 3 (aged 12.82 ± 0.9 years) received no treatment as a control group. Linear and angular measurements were made on lateral cephalograms before and immediately after Forsus treatment. Data were analyzed statistically using paired t-, ANOVA, and Tukey tests.Results:Class I molar relationship and overjet correction were achieved in both treatment groups. Although mandibular growth was statistically nonsignificant, there was a significant headgear effect on the maxilla. Mandibular incisor proclination, maxillary incisor retroclination, and distalization of maxillary molars were significant in both treatment groups. However, no significant differences were found between the treatment groups.Conclusions:Class II correction was mainly dentoalveolar in both treatment groups. Use of miniscrews with Forsus did not enhance mandibular forward growth nor prevent labial tipping of the mandibular incisors.     

A prospective,split-mouth,clinical study of orthodontic titanium miniscrews with machined and acid-etched surfaces

Objectives:To determine whether the success rate and primary stability of surface-treated miniscrews differ from those of nontreated miniscrews.Materials and Methods:Patients who required one or more miniscrews for the same reason in each quadrant were recruited into a single-blinded, split-mouth, randomized, controlled trial with a 1:1 allocation ratio. Self-drilling miniscrews with two surface types were used: those with no surface treatment, and those with an acid-etched surface treatment. The cumulative success rate and primary stability of each type of miniscrew were examined, and factors potentially affecting the success and failure of miniscrews were investigated.Results:Forty patients were included in the study, with a total of 98 orthodontic miniscrews. The overall success rate was 88.8%, and the respective success rates for acid-etched and machined surface miniscrews were 91.8% and 85.7%. The respective mean insertion torques were 13.62 ± 5.95 N·cm and 13.38 ± 4 N·cm, and periotest values measured immediately after insertion were −0.50 ± 2.77 for acid-etched miniscrews and −0.28 ± 3.36 for machined surface miniscrews. There was no significant difference in the mean insertion torques and periotest values according to surface treatment and jaw.Conclusions:Neither the success rate nor the primary stability of acid-etched surface miniscrews and machined surface miniscrews differed significantly. There is a high possibility that miniscrews will fall out in patients who have an open bite or those who require total distalization.     

Assessment of the position and level of mental nerve for placement of implants using cone-beam computed tomography & panoramic radiograph in the Saudi population

Background and objectiveIn surgical dentistry, shape, location, position, and extent of the anterior loop of mental foramen plays a deliberately imperative landmark during an osteotomy procedure. To evade any neurological disturbance during implant surgery radiological assessment is compulsory. Therefore, the aim of the study was to assess the position and level of mental nerve for placement of implants using Cone-beam computed tomography & Panoramic radiography in the Saudi population.Materials and methodsA total of 150 CBCT and Panoramic radiographs were taken from the patients who visited the Department of Oral Medicine and Radiology. The data collection was done by using the same radiographic pieces of equipment for both CBCT and Panoramic radiographs. CBCT images taken from Kodak 9000 3D, Carestream Health, Inc., New York, USA, and Panoramic Radiographs taken from Panoramic Planmeca ProMax, Helsinki, Finland (Vujanovic-Eskenazi et al., 2015). The Chi-square test student test was used for statistical analysis.ResultsThe most frequent shape and location of mental foramen in both CBCT and Panoramic radiographs were oval and in between the first and second premolar, both in CBCT & PR views. The visibility of mental loop on CBCT & PR view showed that; visibility of mental loop in CBCT was higher with 42(56%) as compared with PR view 26(34.66%) with statistically significant p-value 0.014. The mean length of the mental loop on CBCT was statistically significant (p = 0.001). But the mean distance from the lower point of the mental foramen to the lower border of the mandible was not statistically significant.ConclusionBased on the results of the present study; the visibility of the mental loop and its extension is more in CBCT as compared with PR views. Therefore, we recommended CBCT, during of implant surgery.     

Influence of miniscrew dental root proximity on its degree of late stability

Purpose of this study was to evaluate the influence of miniscrew dental root proximity on its late stability degree. 40 miniscrews were inserted between maxillary second premolars and first molars for anterior retraction. Post-surgical radiographs were used to measure the septum width in the insertion site, insertion height, distal and mesial distance from miniscrew to dental root, and the smallest distance between miniscrew and dental root. The miniscrews were divided in two groups according to septum width: ≤3 mm (20 miniscrews) and >3 mm (20 miniscrews). The soft tissue in the insertion site, sensitivity during load, plaque around the miniscrew, and evaluation period were also considered. The results showed no significant difference in miniscrew mobility degree and success rate between groups. Miniscrew dental root proximity did not influence the stability and success rate when the distance between the miniscrew and dental root indicated no periodontal ligament invasion. The overall success rate was 90% and no variable was associated with miniscrew failure. Nevertheless, patient sensitivity was frequently associated with some degree of mini-implant mobility. The septum width did not influence the stability and success rate of this anchorage system, but the extreme root proximity did.     

Cross-sectional evaluation of the prevalence and factors associated with soft tissue scarring after the removal of miniscrews

Objective:To investigate the prevalence of distinguishable soft tissue scarring after the removal of temporary anchorage devices (TADs) such as orthodontic miniscrews and to analyze the factors associated with scar formation.Materials and Methods:The prevalence of soft tissue scarring in 66 patients (202 miniscrew removal sites) was clinically investigated at least 1 year after miniscrew removal. To determine the clinical factors associated with soft tissue scar formation, miniscrew stability; host factors including age, gender, and gingival biotype; and miniscrew-related factors such as insertion site, vertical position, and insertion period were evaluated.Results:The prevalence of a distinguishable scar remaining at least 1 year after miniscrew removal was 44.6%. Patients with flat gingiva showed a significantly higher prevalence of soft tissue scar formation than did those with pronounced scalloped gingiva (P < .05). Maxillary buccal removal sites showed a significantly higher prevalence of soft tissue scar formation than did those in the mandible or palatal slope (P < .05). Miniscrew sites at the alveolar mucosa showed a significantly lower prevalence of soft tissue scar formation than did those in the mucogingival junction or the attached gingiva (P < .01).Conclusion:The prevalence of distinguishable scarring after miniscrew removal was fairly high. On the basis of our results, patients with flat gingiva and buccal interdental gingival insertion sites are more susceptible to scar formation.     

Root canal treatment of a periradicular lesion caused by unintentional root damage after orthodontic miniscrew placement: a case report

AIM: To present the successful endodontic management of a maxillary lateral incisor tooth with a periradicular lesion caused by unintentional root damage after orthodontic miniscrew placement. SUMMARY: A 22-year-old female was diagnosed with a skeletal Class II, Division 2 malocclusion with Class II molar and canine relationships on both sides. The treatment plan included distalization of the maxillary first molars bilaterally followed by full fixed appliance therapy. For the maxillary molar distalization, an appliance in conjunction with a miniscrew anchorage system was designed. Two months later, the patient came to the clinic with complaints of pain in the maxillary right lateral incisor region. On intraoral examination, intraoral sinus tracts were detected in the maxillary right buccal sulcus and palate. A large radiolucent lesion with a well-defined margin around the root of the maxillary right lateral incisor was seen. Root canal treatment was performed on the maxillary right lateral incisor tooth. The root canal was filled with gutta-percha and AH Plus sealer, using a lateral compaction technique. The final restoration of the tooth was completed using composite, and the tooth was reviewed after 10 months. The tooth was asymptomatic and radiographically showed repair of the lesion. Healing was achieved without any need for further endodontic or surgical intervention. Key learning points ? This case illustrates the need to take care with miniscrews when performing orthodontic treatment, especially when the miniscrews are in close proximity to root apices. ? The periradicular lesion as a result of miniscrew damage was successfully treated with root canal treatment.     

Effect of piezocision corticotomy on en-masse retraction:: A randomized controlled trial

ObjectivesTo compare the amount of en-masse retraction with or without piezocision corticotomy, to assess the type of tooth movement, to evaluate root integrity after retraction, and to record reported pain levels.Materials and MethodsThis randomized, controlled clinical trial included 26 orthodontic patients requiring premolar extraction. The patients were divided into two groups: (1) an extraction with piezocision corticotomy group (PCG) and (2) an extraction-only group, which served as the control group (CG). Cone-beam computed tomography images were acquired before and 4 months after the initiation of en-masse retraction utilizing miniscrews. The following variables were assessed: the amount of en-masse retraction, incisor inclination, incisor and canine root resorption, and patient-reported pain.ResultsTwelve and 11 participants completed the entire study in the PCG and CG, respectively. The amount of en-masse retraction was significantly greater in the PCG compared to the CG (mean = 4.8 ± 0.57 mm vs 2.4 ± 0.33 mm, respectively [P < .001]). There was also significantly less tipping and root resorption of incisors in the PCG (P < .05). The reported pain was significantly higher on the first day in the PCG compared to the CG (P < .001); however, it became similar between the groups after 24 hours.ConclusionsPiezocision corticotomy enhanced the amount of en-masse retraction two times more with less root resorption. However, future studies are required to assess the long-term effects of this technique.     

Comparison of transverse analysis between posteroanterior cephalogram and cone-beam computed tomography

Objectives:To evaluate maxillary and mandibular alveolar and basal bone widths using cone-beam computed tomography (CBCT) and to verify the correlation between CBCT images and posteroanterior (PA) cephalograms.Materials and Methods:The CBCT scans and PA cephalograms were obtained from 20 men (age range  =  24.0–29.1 years; mean age  =  27.2 years; SD  =  2.8 years) and 20 women (age range  =  20.3–28.1 years; mean age  =  26.4 years; SD  =  3.2 years) with normal occlusion. On CBCT images, maxillary and mandibular bone widths were measured at three posterior sites and five bone levels. The differences between maxillary and mandibular bone widths were calculated and compared with conventional transverse width of PA cephalograms.Results:Statistically significant differences in maxillary and mandibular bone widths were detected at different levels and sites. Bone widths were significantly increased from the alveolar crest toward the basal bone in the maxillary molar and mandibular second premolar and molar areas. A statistically significant correlation was only found between CBCT images and PA cephalograms for maxillomandibular width at the first molar area.Conclusion:The results of this study suggested that three-dimensional assessment of maxillomandibular width is mandatory for the transverse analysis.     

Maxillary buccal cortical plate inclination at mini-screw insertion sites

Objective:To evaluate whether buccal cortical bone inclination varies for the maxillary alveolar processes of adult patients with decreased, normal, and increased facial heights.Materials and Methods:Cone-beam computed tomography images of 135 adult patients, including 49 hypodivergent subjects (26 women, 23 men), 40 hyperdivergent subjects (24 women, 16 men), and 46 normodivergent (25 women, 21 men) were analyzed. Cortical bone inclination measurements were made relative to the occlusal plane. Cross-sectional slices of the maxilla were taken at interdental sites from the distal aspect of maxillary canine to the mesial aspect of maxillary second molar.Results:Analysis of variance indicated significant differences (P < .05) between the angles formed by the line tangent to the cortical bone and the occlusal plane among the vertical facial types for the regions between canine and first premolar and between second premolar and first molar at miniscrew insertion sites.Conclusion:The results of this study indicate that vertical facial pattern should be taken into consideration when adjusting the insertion angle of miniscrews at the maxillary buccal region.     

Comparison of cone-beam computed tomography and periapical radiography for detecting simulated apical root resorption

Objective:To compare the diagnostic accuracy between cone-beam computed tomography (CBCT) and periapical radiography for detecting simulated external apical root resorption (EARR) in vitro.Materials and Methods:The study sample consisted of 160 single-rooted premolar teeth for simulating EARR of varying degrees according to four setups: no (intact teeth), mild (cavity of 1.0 mm in diameter and depth on root surface), moderate (0.4 mm, 0.8 mm, 1.2 mm, and 1.6 mm root shortening), and severe (2.4 mm, 2.8 mm, 3.2 mm, and 3.6 mm root shortening). Two groups of radiographic images were obtained via CBCT and periapical radiography. The absence or presence and the severity for all resorption lesions were evaluated blindly by two calibrated observers.Results:With the CBCT method, the rates of correct classification of no, mild, moderate, and severe EARR were 96.3%, 98.8%, 41.3%, and 87.5%, respectively; with the periapical radiography method, the rates were 82.5%, 41.3%, 68.8%, and 92.5%, respectively. Highly significant differences were found between the two imaging methods for detection of mild (P < .001), moderate (P < .001), and all EARR (P < .001). For detection of all EARR, the sensitivity and specificity values were 75.8% and 96.3% for CBCT, compared with 67.5% and 82.5% for periapical radiography.Conclusion:CBCT is a reliable diagnostic tool to detect simulated EARR, whereas periapical radiography underestimates it. However, if a periapical radiograph is already available to the diagnosis of EARR, CBCT should be used with extreme caution to avoid additional radiation exposure.     

Bone mineral density: Methods of measurement and its influence on primary stability of miniscrews

Objective:To verify whether bone mineral density (BMD) of cortical bone, trabecular bone, and total bone influence the primary stability of orthodontic miniscrews and to verify whether there is a correlation between the measurement of BMD by cone-beam computed tomography (CBCT) and central dual-energy x-ray absorptiometry (DEXA).Materials and Methods:Twenty bovine bone sections were extracted from the pubic and iliac bones from regions with cortical thicknesses of approximately 1 mm. The BMD of the total bone block was evaluated using two methods: CBCT and DEXA. The BMD of cortical, trabecular, and total bone in the region of interest (ROI) were also evaluated by CBCT. After scanning the bone blocks, 20 self-drilling miniscrews (INP®) 1.4 mm in diameter and 6 mm long were inserted into them. The peak implant insertion torque (IT) was registered. After this, the pull-out test (PS) was performed and the maximum force registered. The Pearson correlation test was applied to verify the correlations between variables.Results:The BMD of the total bone block verified by CBCT and DEXA showed a positive and strong correlation (r  =  0.866, P  =  .000). The BMD of the ROI for cortical bone influenced the IT (r  =  0.518, P  =  .40) and the PS of miniscrews (r  =  0.713, P  =  .001, Table 2). However, the total bone BMD (verified by CBCT and DEXA) and trabecular bone BMD presented weak and not statistically significant correlations with primary stability.Conclusions:There was a positive correlation between total bone block BMD measured by DEXA and CBCT. The cortical BMD influenced the IT and PS.     

Effect of large incisor retraction on upper airway morphology in adult bimaxillary protrusion patients: Three-dimensional multislice computed tomography registration evaluation

Objective:To evaluate, using multislice computed tomography (MSCT), the morphologic changes in the upper airway after large incisor retraction in adult bimaxillary protrusion patients.Materials and Methods:Thirty adult patients with bimaxillary protrusion had four first premolars extracted, and then miniscrews were placed to provide anchorage. A CT scan was performed before incisor retraction and again posttreatment. Three-dimensional (3D) reconstruction of the pre- (T1) and post- (T2) CT data was used to assess for morphological changes of the upper airway. A paired t-test was used to compare changes from T1 to T2. The relationship among the three variables (upper incisor retraction amount, upper airway size, and hyoid position) was analyzed by Pearson correlation coefficient.Results:The amounts of upper incisor retraction at the incisal edge and apex were 7.64 ± 1.68 mm and 3.91 ± 2.10 mm, respectively. The hyoid was retracted 2.96 ± 0.54 mm and 9.87 ± 2.92 mm, respectively, in the horizontal and vertical directions. No significant difference was observed in the mean cross-sectional area of the nasopharynx (P > .05) between T1 and T2, while significant differences between T1 and T2 were found in the mean cross-sectional areas of the palatopharynx, glossopharynx, and hypopharynx (P < .05); these mean cross-sectional areas were decreased by 21.02% ± 7.89%, 25.18% ± 13.51%, and 38.19% ± 5.51%, respectively. The largest change in the cross-sectional area is always noted in the hypopharynx. There was a significant correlation among the retraction distance of the upper incisor at its edge, the retraction distance of the hyoid in the horizontal direction, and the decrease of the hypopharynx.Conclusion:Large incisor retraction leads to narrowing of the upper airway in adult bimaxillary protrusion patients.