Determination of cetylpyridinium chloride and tetracaine hydrochloride in buccal tablets by RP-HPLC

The HPLC method for simultaneous determination of cetylpyridinium chloride (CPC), tetracaine hydrochloride (TTC) in Xipiluan buccal tablets was developed and validated. The HPLC method was performed on a CN column (150 x 4.6 mm i.d., 5 microm particle size); the mobile phase was methanol-tetramethylammonium hydroxide (20 mM)-potassium dihydrogen phosphate (3 mM) (90:10:3, v/v/v) (pH* 5.0), pumped at a flow rate 1.5 ml min(-1). The UV detector was set at 230 nm. The retention time for CPC and TTC was 3.52 and 3.10 min, respectively. Calibration curves were linear (r=0.9999, n=6) in the range of 5-2000 microg ml(-1) for CPC and 1-500 microg ml(-1) for TTC. Limit of detection and quantitation for CPC was 0.033 and 0.11 microg ml(-1), for TTC were 0.0056 and 0.019 microg ml(-1). The R.S.D. of repeatability and intermediate precision for CPC and TTC were less than 2.0%.     

Simultaneous determination of moexipril hydrochloride and hydrochlorothiazide in tablets by derivative spectrophotometric and high-performance liquid chromatographic methods

Two new simple and selective assay methods have been presented for the binary mixtures of moexipril hydrochloride (MOEX) and hydrochlorothiazide (HCTZ) in pharmaceutical formulations. The first method depends on second-derivative ultraviolet spectrophotometry with zero-crossing measurements at 215 and 234 nm for MOEX and HCTZ, respectively. The assay was linear over the concentration ranges 1.0-11.0 microg ml(-1) for MOEX and 0.5-9.0 microg ml(-1) for HCTZ. The determination limits for MOEX and HCTZ were found to be 1.0 and 0.5 microg ml(-1), respectively; while the detection limits were 0.2 microg ml(-1) for MOEX and 0.1 microg ml(-1) for HCTZ. The second method was based on isocratic reversed-phase liquid chromatography by using a mobile phase acetonitrile-20 mM phosphate buffer (pH 4.0) (50:50, v/v). Lisinopril was used as an internal standard (IS) and the substances were detected at 212 nm. The linearity range for both drugs was 0.5-12.0 microg ml(-1). The determination and detection limits were found to be 0.100 and 0.010 microg ml(-1) for MOEX and 0.025 and 0.005 microg ml(-1) for HCTZ, respectively. The proposed methods were successfully applied to the determination of these drugs in synthetic mixtures and commercially available tablets with a high percentage recovery, good accuracy and precision.     

Analysis of neolignans compounds of Piper regnellii (Miq.) C. DC. var. pallescens (C. DC.) Yunck by HPLC

A high performance liquid chromatographic (HPLC) method was developed and validated for quantitative determination of neolignans in extracts of Piper regnellii var. pallescens. The analysis were carried out on a Metasil ODS column (150 mm x 4.6 mm, 5 microm) at 30 degrees C, using as mobile phase acetonitrile-water (60:40, v/v) containing 2% acetic acid. The flow rate was 1.0 ml/min and the detection was at 280 nm. The validation using conocarpan as standard demonstrated that the method presents linearity (linear correlation coefficient=0.9991), precision (relative standard deviation <5%) and accuracy (mean recovery=104.55%) in the concentration range 31.25-500 microg/ml. The limit of detection (LOD) was 1.68 microg/ml and the limit of quantitation was 5.60 microg/ml. This method allowed the identification and quantification of conocarpan, eupomatenoid-5 and eupomatenoid-6 in the hydroethanolic extracts obtained from the leaves, stems and roots by maceration process. All the extracts showed the same chromatographic profile, being that the extract of the roots presented the highest concentration of neolignans.     

Determination of atazanavir in human plasma using solid-phase extraction and high-performance liquid chromatography

Atazanavir is a new HIV-1 protease inhibitor. A simple high-performance liquid chromatographic method using UV detection was developed and validated for the analysis of atazanavir in human plasma. The sample clean up was carried out using solid-phase extraction with OASIS MCX cartridge. The chromatographic separation was achieved on a Kromasil C18 (150 mm x 3 mm, 5 microm) column with a mobile phase consisting of acetonitrile and water (38:62 v/v) delivered isocratically. The effluent of the column was monitored at a wavelength of 210 nm. The assay was linear over the concentration range of 0.156 to 10 microg/ml and the limit of quantification was 0.156 microg/ml. The method was also validated with respect to recovery, precision, accuracy and specificity. This method is suitable for therapeutic drug monitoring of atazanavir and can be easily reproduced with standard equipment.     

Determination of cetirizine dihydrochloride, related impurities and preservatives in oral solution and tablet dosage forms using HPLC

An HPLC method was developed and validated for the determination of cetirizine dihydrochloride (CZ) as well as its related impurities in commercial oral solution and tablet formulations. Furthermore, two preservatives associated with the drug formulations, namely, propyl (PP) and butylparabens (BP) were successfully determined by this method. The chromatographic system used was equipped with a Hypersil BDS C18, 5 microm column (4.6 x 250 mm) and a detector set at 230 nm in conjunction with a mobile phase of 0.05 M dihydrogen phosphate:acetonitrile:methanol:tetrahydrofuran (12:5:2:1, v/v/v/v) at a pH of 5.5 and a flow rate of 1 ml min(-1). The calibration curves were linear within the target concentration ranges studied, namely, 2 x 10(2) - 8 x 10(2) microg ml(-1) and 1-4 microg ml(-1) for CZ, 20-100 microg ml(-1) for preservatives and 1-4 microg ml(-1) for CZ related impurities. The limits of detection (LOD) and quantitation (LOQ) for CZ were, respectively, 0.10 and 0.34 microg ml(-1) and for CZ related impurities were in the ranges of 0.08-0.26 microg ml(-1) and 0.28-0.86 microg ml(-1), respectively. The method proved to be specific, stability indicating, accurate, precise, robust and could be used as an alternative to the European pharmacopoeial method set for CZ and its related impurities.     

Development and validation of RP-HPLC-UV method for simultaneous determination of buparvaquone, atenolol, propranolol, quinidine and verapamil: a tool for the standardization of rat in situ intestinal permeability studies

A simple, sensitive and specific reversed phase high performance liquid chromatographic (RP-HPLC) method with UV detection at 251 nm was developed for simultaneous quantitation of buparvaquone (BPQ), atenolol, propranolol, quinidine and verapamil. The method was applicable in rat in situ intestinal permeability study to assess intestinal permeability of BPQ, a promising lead compound for Leishmania donovani infections. The method was validated on a C-4 column with mobile phase comprising ammonium acetate buffer (0.02 M, pH 3.5) and acetonitrile in the ratio of 30:70 (v/v) at a flow rate of 1.0 ml/min. The retention times for atenolol, quinidine, propranolol, verapamil and BPQ were 4.30, 5.96, 6.55, 7.98 and 8.54 min, respectively. The calibration curves were linear (correlation coefficient > or =0.996) in the selected range of each analyte. The method is specific and sensitive with limit of quantitation of 15 microg/ml for atenolol, 0.8 microg/ml for quinidine, 5 microg/ml for propranolol, 10 microg/ml for verapamil and 200 ng/ml for BPQ. The validated method was found to be accurate and precise in the working calibration range. Stability studies were carried out at different storage conditions and all the analytes were found to be stable. This method is simple, reliable and can be routinely used for accurate permeability characterization.     

A validated HPLC assay for simultaneous analysis of salmon calcitonin and duck ovomucoid

A highly sensitive and selective analytical HPLC method is reported for the simultaneous measurement of salmon calcitonin (sCT) and its enzyme inhibitor, duck ovomucoid (dOVM). The method used a reversed phase C-18 column (4.6 x 250 mm, 5 microm) at room temperature. The elution was achieved using a gradient technique (20-35% B for 10 min, 35-37% B from 10th to 20th min and 37-20% B from 20th to 25th min). The mobile phase used was 0.05% v/v trifluoroacetic acid (TFA) in water and 0.05% v/v TFA in acetonitrile with a flow rate of 1 ml/min. Detection was carried out by UV spectrophotometry at 210 nm. sCT and dOVM were eluted at 7.8 and 15.4 min respectively, free from any interfering endogenous peaks during a run time of 25 min. Linear relationships were observed between the detector response and the concentrations of the analytes (10-100 microg/ml for CT (r2 = 0.996) and 10-100 microg/ml for the dOVM (r2 = 0.999)). The assay was found to be highly selective and sensitive due to the absence of any interfering peaks. The lower C.V. and % error values of the assay indicates that the assay could accurately and precisely quantitate both sCT and dOVM in the examined concentration range. This method can be usedfor the simultaneous quantitative analysis of sCT and dOVM.     

Determination of leflunomide in tablets by high performance liquid chromatography

In the present study, a reverse phase high performance liquid chromatography (HPLC) method was validated and applied for the determination of leflunomide in tablets. Chromatographic separation of leflunomide and oxazepam as an internal standard was carried out on a C(18) column (50 mm, 3 mm i.d.) using a mobile phase, consisting of methanol and water (60:40, v/v), at a flow rate of 0.5 ml min(-1) and UV detection at 260 nm. The retention times for oxazepam and leflunomide were 2.6 and 5.2 min, respectively. The validated quantification range of the method was 2.7 x 10(-6) to 5.5 x 10(-5) M for leflunomide. The results of the developed procedure in tablets were compared with those of UV spectrophotometry to assess active leflunomide content.     

An improved and validated LC method for resolution of bicalutamide enantiomers using amylose tris-(3,5-dimethylphenylcarbamate) as a chiral stationary phase

An improved HPLC method for determination of enantiomeric purity of bicalutamide in drugs and pharmaceuticals was developed and validated. Baseline separation with resolution >/=6.0 was achieved within 10 min on Chiralpak AD-H (250 mm x 4.6 mm; particle size 5 microm) column using n-hexane:2-propanol (65:35 v/v) as mobile phase at a flow rate of 1.0 ml/min at 25 degrees C. The detection was made at 270 nm using UV detector while a polarimetric detector connected in series was used for identification of enantiomers. The effects of 2-propanol, ethanol and temperature on enantioselectivity and resolution of enantiomers were evaluated. The method was validated in terms of accuracy, precision and linearity in the range of 10-250 microg/ml and the r(2) was >0.9999. The recoveries were 99.68-100.25% with <1% R.S.D. The limits of detection (LOD) and quantification (LOQ) of enantiomers were (2.4, 3.0 and 7.6, 9.3) x 10(-8)g/ml for (S)-(+)-BCT and (R)-(-)-BCT enantiomers, respectively. The method was found to be suitable for rapid determination of enantiomeric purity of bicalutamide in bulk drugs and pharmaceutical formulations.     

Determination of vinflunine in rat plasma by liquid chromatography-electrospray ionization mass spectrometry for a pharmacokinetic study

A rapid, simple and sensitive high-performance liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) method for the quantification of vinflunine in rat plasma was developed and validated. After making alkaline with NaOH, plasma was extracted with ethyl acetate and determined by LC-MS. The analysis was carried out on a Shimadzu VP-ODS column (150 mmx4.6 mm ID, packed with 5 microm C18 Silica RP particle). The mobile phase consisted of methanol-10 mM ammonium acetate buffer (80:20, v/v) with the flow rate of 1.0 ml/min. LC-MS was performed in the selected ion monitoring (SIM) mode using target ions at m/z: 817.3 for vinflunine and m/z: 373.2 for finasteride (IS). Chromatographic separation was achieved in less than 6 min and the calibration curve was linear over a concentration range of 0.025-6.25 microg/ml. The intra-assay and inter-assay variability values were less than 8.6%. The accuracy ranged from 91.5 to 105.6%. The established method has been successfully applied to a pharmacokinetic study of vinflunine in rats.     

RP-HPLC Method for Simultaneous Estimation of Nitazoxanide and Ofloxacin in Tablets

A reverse phase high performance liquid chromatography method was developed for simultaneous estimation of nitazoxanide and ofloxacin in tablet formulation. The separation and quantification was achieved by Hiq Sil C₁₈V Size 4.6 mm Ø ^*250 mm column in isocratic mode, with mobile phase consisting of acetonitrile-methanol-0.4 M citric acid, (60:30:10, v/v/v). Citric acid used to stabilize nitazoxanide and ofloxacin in mobile phase. The mobile phase was pumped at a rate of 0.6 ml/min and the detection was carried out at 304 nm. The retention time of ofloxacin and nitazoxanide was found to be 3.122 and 5.902 min, respectively. The method was validated for linearity, accuracy, and precision. Linearity for ofloxacin and nitazoxanide were in the range 2-36 μg/ml and 5-90 μg/ml, respectively. The developed method was found to be accurate, precise and selective for simultaneous estimation of ofloxacin and nitazoxanide in tablets.     

Simultaneous determination of zonisamide, carbamazepine and carbamazepine-10,11-epoxide in infant serum by high-performance liquid chromatography

This study developed a simple method for the simultaneous determination of zonisamide (ZNS), carbamazepine (CBZ) and its active metabolite, carbamazepine-10,11-epoxide (CBZE) in infant serum using reversed-phase high-performance liquid chromatograph (HPLC). The method involves a single-step protein precipitation procedure that uses no solid-phase or liquid-liquid extraction. The HPLC separation was carried out on a Cadenza CD-C18 column (3 microm, 4.6 mm x 150 mm) with potassium phosphate buffer (pH 4.6; 25 mM)-methanol-acetonitrile (65:20:15 (v/v/v)) as a mobile phase at a 1.0 ml/min flow rate: ZNS was detectable using a UV detector at 235 nm, and both CBZ and CBZE were at 215 nm. The quantification limits were established in accordance with each therapeutic range at 2.5 microg/ml for ZNS, 0.5 microg/ml for CBZ, and 0.25 microg/ml for CBZE. The respective coefficients of variation were 1.3-6.0% and 2.2-7.7% for the intra- and inter-assay.     

Development and validation of bioanalytical method for the determination of asulacrine in plasma by liquid chromatography

Asulacrine (9-[(2-methoxy-4-methylsulphonylamino)phenylamino]-N,5-dimethyl-4-acridinecarboxamide), an analogue of the antileukaemia drug amsacrine, has high antitumour activity in mice and has also shown clinical activity. A simple method is described for the quantitation of asulacrine in plasma by liquid chromatography. Chromatographic separation was achieved on a reversed phase C 18 column (250 mm x 4.6mm, particle size 5 microm, Gemini) using isocratic elution (acetonitrile and 0.01 M sodium acetate buffer pH 4.0, 45/55, v/v) at a flow rate of 1 ml/min. Asulacrine and internal standard (the ethylsulphonanilide analogue) were measured using UV detection at 254 nm. The total chromatographic run-time was 8 min with asulacrine and internal standard eluting at approximately 4.7 and approximately 6.5 min, respectively. Limit of quantification was 0.1microg/ml. The linearity range of the method was 0.1-10 microg/ml (r2=0.9995). Mean recoveries from plasma were 100-105%. Intra-batch and inter-batch precision was 7.1 and 7.8%, respectively, and intra-batch and inter-batch accuracy (relative error) was 4.9 and 8.4%, respectively (n=8 in all cases). The bench top, freeze thaw, short-term storage and stock solution stability evaluation indicated no evidence of degradation of asulacrine. The validated method is simple, selective and rapid and can be used for pharmacokinetic studies in mice.     

Simultaneous LC determination of tizanidine and rofecoxib in tablets

A reverse phase high performance liquid chromatographic method to determine tizanidine (TZ) and rofecoxib (RF) in combination is proposed and applied to the pharmaceuticals. This method allows the determination of 0.1-0.5 microg/ml of TZ and 1.2-6.0 microg/ml of RF along with 10 microg/ml of nimesulide (internal standard), in a mobile phase consisting of 1% (v/v) triethylamine (pH adjusted to 2.5 using dilute orthophosphoric acid):acetonitrile in the ratio 55:45% (v/v). Detection wavelength of 303 nm and flow rate of 0.8 ml/min were fixed for the study. The limit of detection (LOD) for TZ and RF were found to be 10 and 1 ng/ml, respectively. The limit of quantification (LOQ) for TZ and RF were found to be 80 and 12 ng/ml, respectively. The amount of drug present in the tablet and the recovery studies were also carried out. The % R.S.D. of recovery studies for TZ and RF were found to be 0.0673 and 0.0146, respectively. The method is validated for accuracy, precision, ruggedness and robustness.     

RP-HPLC Method for Simultaneous Estimation of Frusemide and Amiloride Hydrochloride in Tablet Formulation

A new reverse phase high performance liquid chromatography method for the simultaneous estimation of frusemide and amiloride hydrochloride in tablet formulation is developed. The determination was carried out on a HIQ SIL, C18 (250×4.6 mm, 5 μm) column using a mobile phase of 50 mM phosphate buffer solution:acetonitrile (50:50 v/v, pH 3.0). The flow rate was 1.0 ml/min with detection at 283 nm. The retention time for frusemide was 3.038 min and for amiloride hydrochloride 10.002 min. Frusemide and amiloride hydrochloride showed a linear response in the concentration range of 20-200 μg/ml and 10-100 μg/ml, respectively. The results of analysis have been validated statistically and by recovery studies. The mean recoveries found for frusemide was 99.98% and for amiloride hydrochloride was 100.09%. Developed method was found to be simple, accurate, precise and selective for simultaneous estimation of frusemide and amiloride hydrochloride in tablets.     

Development and validation of an accurate HPLC method for the quantitative determination of picroside II in tablets

A simple, sensitive and accurate high performance liquid chromatographic method (HPLC) with UV detection was developed and validated to determine picroside II in a new tablet formulation with paeoniflorin as internal standard. Chromatographic separation was achieved on an Agilent XDB C18 column (250 x 4.6 mm I.D., 5 microm) using a mobile phase consisting of acetonitrile-water-acetic acid (18:82:0.4, v/v/v) at a flow rate of 1.0 ml/min. The UV detection wavelength was set at 265 nm. Linear calibration curves were obtained in the concentration range of 0.10-100 microg/ml with the limit of quantification (LOQ) of 0.10 microg/ml. The within- and between-run precisions in terms of % relative standard deviation (RSD) were lower than 5.7% and 6.3%, respectively. The accuracy in terms of % relative error (RE) ranged from -2.3% to 5.0%. This validated method was successfully applied to the determination of the content of picroside II in a new tablet formulation.     

Development and validation of a liquid chromatographic method for determination of enantiomeric purity of citalopram in bulk drugs and pharmaceuticals

A simple, rapid and robust LC method for enantiospecific separation and determination of citalopram in drugs and pharmaceuticals was developed using UV and polarimetric detectors connected in series. Baseline separation with resolution > or = 3.0 was achieved within 20 min on Chiralcel OD-H (250 mm x 4.6 mm) 5 microm column using a mobile phase containing of n-hexane:2-propanol:triethylamine (TEA) (95:05:0.1 v/v/v) at a flow rate of 1.0 ml/min at 25 degrees C. Effects of 2-propanol, triethylamine and temperature on enantioselectivity and resolution of the enantiomers were evaluated. Clopidogrel hydrogen sulphate was used as an internal standard (IS) for quantitative determinations using UV detector at 240 nm. Polarimetric detector was used for identification of enantiomers. The limits of detection (LOD) and quantification (LOQ) were 0.5 and 1.3 microg/ml respectively for both the enantiomers. The linearity of the method was in the range of 50-600 microg/ml with r2 > 0.9999. The inter- and intra-day assay precision was less than 0.63% (%R.S.D.) and recoveries were in the range 99.38-100.41%. The method was validated and found to be suitable for determination enantiomeric purity of citalopram in bulk drugs and pharmaceutical formulations.     

HPLC method for the analysis of harmol,harmalol, harmine and harmaline in the seeds of Peganum harmala L

A simple and sensitive method for separation and determination of harmol, harmalol, harmine and harmaline has been developed and validated. Harmol, harmalol, harmine and harmaline were separated using a Metasil ODS column by isocratic elution with flow rate 1.5 ml/min. The mobile phase composition was Isopropyl alcohol-Acetonitrile-Water-Formic acid (100:100:300:0.3) (v/v/v/v) and pH adjusted 8.6 with triethylamine. Spectrophotometric detection was carried out at 330 nm. The linear range of detection for harmol, harmalol, harmine and harmaline were between 9.375-250, 30.750-246, 31.250-500 and 31.000-248 microg/ml, respectively. The method described was suitable for the determination of harmol, harmalol, harmine and harmaline in the seeds of Peganum harmala L.     

LC determination of finasteride and its application to storage stability studies

The development of a simple, sensitive, rapid, and reproducible reversed-phase high-performance liquid chromatographic assay of finasteride (proscar) in preformulation, and its application to forced degradation studies has been carried out. The method showed excellent linearity (r2 > or = 0.9997) in the range 20-600 microg x ml(-1) using a Shimpak C8 column (5 microm, 15.0 cm x 4.6 mm) and UV-detection (210 nm) at ambient temperature (25 +/-1 degree C) with a mobile phase of acetonitrile and water (95:05,v/v) and flow rate of 0.7 ml x min(-1). All peaks are eluted in < 10 min and the method has good precision. This method showed good efficiency for the analysis of forced degraded samples, studied at different temperatures and humidities. The results manifest that the shelf-life of proscar is greater than two years at room temperature, under proper storage conditions.     

Capillary gas chromatographic determination of phenylpropanolamine in pharmaceutical preparation

Analytical procedure has been developed for the gas chromatographic determination of phenylpropanolamine (PPA) using trifluoroacetylacetone (FAA) as derivatizing reagent. Elution is carried out from the column HP-5 (30 mx0.32 mm i.d.) with film thickness 0.25 microm at initial column temperature 70 degrees C for 5 min, followed by heating rate 10 degrees C/min up to 120 degrees C. Injection port temperature was maintained at 270 degrees C. Nitrogen flow rate was 2 ml/min and detection was by FID. The linear calibration curve was obtained with 30-150 microg/ml PPA with detection limit of 6.0 microg/ml. The method was used for the determination of PPA from Sinutab and Tavegyl-D tablets. The relative standard deviation (R.S.D.) for the analysis of pharmaceutical preparation was obtained within 0.4-0.9%.