Midterm Clinical and Radiographic Outcomes of a Contemporary Monoblock Dual-Mobility Cup in Uncemented Total Hip Arthroplasty

BackgroundThe efficacy of contemporary monoblock dual-mobility (DM) cups to prevent dislocations in total hip arthroplasty (THA) is well reported, but there is little published data on their mid- to long-term outcomes. The authors aimed at reporting the 10-year survival of a contemporary DM cup as well as its clinical and radiographic outcomes.MethodsFrom a retrospective consecutive multicentric series of 516 patients (541 hips) that received uncemented THA between June 2007 and June 2010, 6 patients (6 hips) had cup and stem revisions, 5 patients (5 hips) had isolated stem revision, and 2 patients (2 hips) had isolated insert revision. A total of 103 patients (111 hips) died with their original implants, and 41 patients (42 hips) were lost to follow-up. This left 358 patients (375 hips) for clinical assessment at a median follow-up of 8.7 years (range, 6.8-10.5 years), including 279 patients (290 hips) with postoperative radiographs. Implant survival was calculated using the Kaplan-Meier method, and multivariable analyses were performed to determine whether clinical outcomes are associated with patient or surgical factors.ResultsThe 10-year survival considering revision for aseptic loosening as end point was 100% for the cup and 99.2% for the stem. No dislocations were observed, and radiographic assessment revealed 1 acetabular granuloma (0.3%), but no radiolucencies nor fractures. The Harris hip score improved from 49.6 ± 15.5 to 85.2 ± 14.5, and the postoperative Oxford hip score was 19.2 ± 7.6. Multivariable analyses revealed that improvement in Harris hip score increased with cup diameter (beta, 1.28; P = .039).ConclusionOur data confirmed satisfactory midterm outcomes of uncemented THA using a contemporary DM cup, with no dislocations nor cup revisions due to aseptic loosening.Level of EvidenceLevel IV, retrospective cohort study.     

Scandinavian multicenter porous coated anatomic total hip arthroplasty study: Clinical and radiographic results with 7- to 10-year follow-up evaluation

Four hundred ninety-four patients (539 hips) with a mean age of 50.1 (SD, 9.7) years entered a prospective, multicenter study of the Porous Coated Anatomic (Howmedica, Rutherford, NJ) total hip arthroplasty. The preoperative diagnoses were primary osteoarthrosis (297 hips), secondary osteoarthrosis to childhood diseases (88 hips), fracture (73 hips), inflammatory arthritis (26 hips), idiopathic avascular necrosis (28), and miscellaneous (27 hips). After a mean follow-up period of 6 years and 10 months. 71 hips had been revised. The mean Harris hip score increased from 43 (15.7) to 94 (7.4) at the last follow-up evaluation, without any deterioration with time. After 7 years, the combined survival rate for the cup and/or stem using revision as endpoint was 92.2%. Radiographic failure, defined as migration of either component more than 5 mm and/or focal osteolysis, was registered in 72 stems and 96 cups. The combined clinical (revision) and radiographic 7-year survival rates were 61.1 (± 5.2) and 59.7 (± 5.3) for the stem and cup, respectively. Statistical analysis revealed that young age and poor fill rate influenced the rate of stem failure, whereas cup failure was difficult to predict. Four variables were associated with stem subsidence: loosening of beads, pedestal formation, sclerotic lines in Gruen zone 7, and acetabular granuloma. According to our findings, the 5- to 10-year complication rate with this implant is high. Therefore, continuous radiographic follow-up evaluation of these cases is strongly recommended, to enable revision before severe destruction of bone or catastrophic clinical failure has occurred.     

Howse II cemented titanium metal-backed acetabular cupsPoor 10-year results in 107 hips

We report a retrospective clinical and radiographic review of 107 consecutive primary total hip replacements, using the cemented Howse II prosthesis. The review concentrates on the long-term performance of the acetabular cup, which was designed with a cylindrical titanium metal backing and a polyethylene liner. In all the hips in the series, this cup was used with a modular titanium straight femoral stem and a 32-mm diameter titanium head. At a mean follow-up of 9.8 (7-11) years, 28 hips had already been revised and 10 others were recognized as clinical or radiographic failures. The indication for revision in 26 of the hips was aseptic loosening and the mean time to revision was 7.2 (3.7-10.9) years This metal-backed cup has only 42% survival at 10 years, which seems to be related to certain of its design features. These include an inadequate thickness of polyethylene sterilized by gamma irradiation in air, a lack of mechanical bonding between the liner and its metal shell, and the high wear rate from the use of a 32-mm titanium femoral head.     

Howse II cemented titanium metal-backed acetabular cups

We report a retrospective clinical and radiographic review of 107 consecutive primary total hip replacements, using the cemented Howse II prosthesis. The review concentrates on the long-term performance of the acetabular cup, which was designed with a cylindrical titanium metal backing and a polyethylene liner. In all the hips in the series, this cup was used with a modular titanium straight femoral stem and a 32-mm diameter titanium head. At a mean follow-up of 9.8 (7-11) years, 28 hips had already been revised and 10 others were recognized as clinical or radiographic failures. The indication for revision in 26 of the hips was aseptic loosening and the mean time to revision was 7.2 (3.7-10.9) years This metal-backed cup has only 42% survival at 10 years, which seems to be related to certain of its design features. These include an inadequate thickness of polyethylene sterilized by gamma irradiation in air, a lack of mechanical bonding between the liner and its metal shell, and the high wear rate from the use of a 32-mm titanium femoral head.     

Howse II cemented titanium metal-backed acetabular cups: poor 10-year results in 107 hips

We report a retrospective clinical and radiographic review of 107 consecutive primary total hip replacements, using the cemented Howse II prosthesis. The review concentrates on the long-term performance of the acetabular cup, which was designed with a cylindrical titanium metal backing and a polyethylene liner. In all the hips in the series, this cup was used with a modular titanium straight femoral stem and a 32-mm diameter titanium head. At a mean follow-up of 9.8 (7-11) years, 28 hips had already been revised and 10 others were recognized as clinical or radiographic failures. The indication for revision in 26 of the hips was aseptic loosening and the mean time to revision was 7.2 (3.7-10.9) years This metal-backed cup has only 42% survival at 10 years, which seems to be related to certain of its design features. These include an inadequate thickness of polyethylene sterilized by gamma irradiation in air, a lack of mechanical bonding between the liner and its metal shell, and the high wear rate from the use of a 32-mm titanium femoral head.     

Wear of the cup in the Charnley LFA in the young patient

Since wear and loosening of the ultra-high-molecular-weight polyethylene cup are factors which limit the life of an arthroplasty we have attempted to identify factors associated with either low wear (0.02 mm/year or less) or high wear (0.2 mm/year or more). In a series of 1434 Charnley low-friction arthroplasties (1092 patients) 190 (13.2%) showed low wear while 149 (10.4%) showed high wear. We used chi-squared test to assess the significance of various factors. The significant factors of the low-wear group were female gender (p = 0.042), rheumatoid arthritis (p = 0.014), Charnley grade C (p = 0.03) and varus position of the stem (p = 0.003). The use of acetabular cement pressurisation (p = 0.07) and medialisation of the cup (p = 0.07) approached significance. In the high-wear group there was a predominance of men (p = 0.042) with osteoarthritis (p = 0.006) as the underlying hip pathology, and the stem in a valgus position (p = 0.023). Support of the cup by the rim of the acetabulum approached significance (p = 0.07). There was no statistical significance between the two groups for revision for aseptic loosening of the stem or fracture of the stem (p = 0.49). There was a highly significant difference (p < 0.0001) between the two groups for revision for wear and aseptic loosening of the cup, 5.3% compared with 39%. Changes in the cup geometry are probably sufficient to explain the increasing incidence of loosening and revisions with the increasing depth of penetration of the cup. There is much to be gained from the use of a low-wearing ceramic-ultra-high-molecular-weight combination. Tissue reaction to the polyethylene particles cannot be the cause of aseptic loosening of the stem.     

Long-term results of cementless primary total hip arthroplasty with a threaded cup and a tapered,rectangular titanium stem in rheumatoid arthritis and osteoarthritis

The aim of this study was to assess the outcome of primary cementless total hip arthroplasty in rheumatoid arthritis patients and to compare the results with osteoarthritis patients. Sixty-four patients (77 hips) with rheumatoid arthritis and 120 patients (135 hips) with osteoarthritis had a conical-shaped Zweymueller threaded cup and a tapered, rectangular Zweymueller stem implanted and were assessed after an average of 12.5 years. The endpoints for survival analysis were failure of one or both components due to radiographic loosening or revision. Revision was defined as exchange of cup, stem or both. When the PE-insert or the ceramic ball head were exchanged leaving cup and stem in place, e.g. for PE-wear or dislocation, this was not considered a revision but a re-intervention. No differences were found in survival rates; however, in the rheumatoid arthritis group there was an increased rate of malposition of the cup, avulsions of the greater trochanter, and increased bone resorption in the trochanteric region. This study shows that despite altered biomechanical properties of rheumatoid bone, mechanical stability and osseous integration of cementless prosthesis are not compromised and, although a higher complication rate did occur, long-term survival is excellent.     

Metallosis after contemporary metal-on-metal total hip arthroplasty. Five to nine-year follow-up

BACKGROUND: Authors of recent studies have reported early periprosthetic osteolysis in patients who have been treated with a contemporary metal-on-metal total hip arthroplasty and have suggested that metal hypersensitivity associated with an immunologic response to metal may be of etiologic importance. We evaluated the results and histologic findings in patients who had undergone revision of a failed contemporary metal-on-metal total hip arthroplasty. METHODS: Two hundred and seventeen total hip arthroplasties (SL-Plus stem and Bicon-Plus cup) with a Sikomet metal-on-metal articulation were implanted in 194 consecutive patients, and the results were retrospectively reviewed at a mean of seventy-seven months postoperatively. Clinical follow-up with the Harris hip score and plain radiographic evaluation were performed. Periprosthetic tissues from fourteen hips that had undergone revision arthroplasty were subjected to histologic analysis. RESULTS: The mean Harris hip score improved from 45 points preoperatively to 88 points at the final evaluation. Fourteen hips (6.5%) were revised: nine because of aseptic loosening, two because of technical failure, and three because of septic failure. Histologic examination of the retrieved periprosthetic tissues from the eleven patients who had undergone revision because of aseptic loosening or technical failure showed metallosis and extensive lymphocytic and plasma-cell infiltration around the metal debris. With removal of the component because of aseptic loosening as the end point, survivorship was 93% for the stem and 98% for the cup. CONCLUSIONS: Our findings are in agreement with those in recent publications and support the possibility that periprosthetic osteolysis and aseptic loosening in hips with a metal-on-metal articulation are possibly associated with hypersensitivity to metal debris. Prospective, comparative, randomized long-term studies are necessary to determine the cause(s) of loosening of prostheses with this particular articulation.     

Long-term results of total hip arthroplasty with a cemented custom-designed swan-neck femoral component for congenital dislocation or severe dysplasia: a follow-up note

BACKGROUND: This follow-up study updates the results in a consecutive series of nineteen cemented total hip replacements with a swan-neck femoral component in patients with congenital dislocation or severe hip dysplasia. The series was previously reported on in 1993. METHODS: The patients were petite, with an average height of 152 cm and an average weight of 50 kg, and the femoral canals could not accommodate an off-the-shelf femoral component. Sixteen of the nineteen hips were available for follow-up at an average of 13.3 years (range, eleven to twenty years). Fourteen hips had up-to-date clinical and radiographic examinations. RESULTS: At the time of the latest follow-up, thirteen hips were rated as excellent; two, as good; and one, as a failure because of loosening of both components requiring revision eleven years after the index operation. Another hip required acetabular revision because of loosening fifteen years after the index operation. The rates of femoral and acetabular component revision were 6% and 12.5%, respectively. Radiographic analysis demonstrated that no femoral component was loose. One cup was definitely loose at 19.5 years, and three cups were possibly loose at an average of fourteen years. The radiographic rate of acetabular loosening was 33%. The total rate of cup failure (radiographic loosening and revision) was 43%. CONCLUSIONS: The excellent clinical and radiographic results associated with the swan-neck femoral component, and the 94% rate of survival, at an average of 13.3 years (range, eleven to twenty years) indicate that the biomechanical objectives of this custom-designed prosthesis for patients with congenital dislocation or severe hip dysplasia were met. On the basis of this favorable long-term experience, we still use this prosthesis when the anatomic abnormality cannot be adequately addressed by use of a commercially available prosthetic component.     

A ten- to 15-year follow-up of the cementless spotorno stem

We followed the first 354 consecutive implantations of a cementless, double-tapered straight femoral stem in 326 patients. Follow-up was at a mean of 12 years (10 to 15). The mean age of the patients was 57 years (13 to 81). At follow-up, 56 patients (59 hips) had died, and eight (eight hips) had been lost to follow-up. Twenty-five hips underwent femoral revision, eight for infection, three for periprosthetic fracture and 14 for aseptic loosening. The overall survival was 92% at 12 years (95% CI 88 to 95). Survival with femoral revision for aseptic loosening as an endpoint was 95% (95% CI 92 to 98). The median Harris hip score at follow-up was 84 points (23 to 100). Radiolucent lines (< 2 mm) in Gruen zones 1 and 7 were present in 38 (16%) and 34 hips (14%), respectively. Radiolucencies in zones 2 to 6 were found in five hips (2%). The results for mid- to long-term survival with this femoral component are encouraging and compare with those achieved in primary cemented total hip arthroplasty. The high rate of loosening of the cup and the high rate of pain are, however, a source of concern.     

Results of the Harris-Galante cementless hip prosthesis.

We reviewed 82 primary arthroplasties (in 71 patients) in which cementless porous-coated hip prostheses were used. The mean age of the patients at operation was 52 years (24 to 86); they were followed up for an average of 62.1 months (60 to 66). The diagnosis was avascular necrosis of the femoral head in 35%, fracture of the femoral neck in 24%, primary osteoarthritis in 16% and miscellaneous in 25%. The average preoperative Harris hip score was 56.7 points and the average postoperative score was 83.3 points. Eight hips (10%) had component loosening; four had been revised and four were awaiting revision. In 27 hips (33%) there was a radiolucent line wider than 2 mm in zones 1 and 7. In 55 hips (67%) there was calcar resorption of more than 10 mm. Twenty patients (28%) complained of thigh pain although they had no radiographic evidence of loosening of a component. Factors that may have contributed to the poor clinical and radiographic results were: 1) inadequate surface area for bone ingrowth, particularly on the lateral aspect of the upper part of the prosthesis, 2) poor initial fit of the stem in the metaphysis, which resulted in cantilever motion of the proximal part of the stem about the well-fixed distal stem, and 3) the collar of the prosthesis, which prevented it from subsiding to a naturally stable position and caused damage to the calcar.     

Mid-term results and migration behaviour of a ti-alloy cemented stem

Between 1991 and 1994, 147 patients (154 hips) underwent a primary cemented total hip replacement using the Ultima ti-alloy, collarless, double-tapered stem and a UHMWPE cup. The average age at operation was 66.4 years. Ninety-one patients (97 hips) were available for review with an average follow-up of 76 months. The Harris hip score had improved from pre-operative average of 43.1 (12.5-65.0) to the latest score of 88.9 (67.5-100). There were 11 revisions in total, eight of which were for aseptic stem loosening. The results of Kaplan-Meier survival analysis, based on stem revision for aseptic loosening as an end-point, was 92% at 8 years. Early stem migration analysis at 2 years was possible in 114 cases using digitised radiographs analysed by the EBRA method. Sixty-three stems had not migrated and 35 migrated less than 2 mm with only one of these ending in failure. Sixteen stems showed early migration of more than 2 mm and five of these failed. Early stem migration is predictive of stem failure. Osteolytic lesions occurred in 12 femurs and four of these stems failed.     

Poor results of the cementless total hip arthroplasty with a nonporous coated acetabular component: AcSys Shearer Cup

Background This study followed patients for a minimum of 7 years after primary total hip arthroplasty using cementless acetabular components and evaluated their outcomes. Methods We followed 73 patients (75 hips), who had undergone total hip arthroplasty with cementless nonporous coated acetabular components (3M AcSys Shearer Cup) for a mean of 9.8 years (range 7–13 years). There were 61 women and 12 men with a mean age of 53 years (range 27–69 years) at surgery. The diagnosis was primary osteoarthritis in 9 hips, osteoarthritis secondary to developmental dysplasia in 58 hips, osteonecrosis of the femoral head in 6 hips, and rheumatoid arthritis in 2 hips. Results Three cups were revised because of aseptic loosening, and one cup was revised following removal of the prosthesis due to deep infection. Radiographic loosening was observed in 22 hips at the latest follow-up. The survival rate at 10 years was 94.7% with revision as the endpoint and 72% with radiographic loosening as the endpoint. The Merle d'Aubigné and Postel hip score showed significant improvement postoperatively and was maintained well even in cases showing radiographic loosening. Conclusions The intermediate radiological results with the AcSys Shearer Cup were unsatisfactory because of the high loosening rate, although the revision rate was low. The nonporous outer surface and the poor fixation mechanism between the metal shell and liner may have contributed to the high failure rate. Regular radiological review is recommended when this cup is used because early loosening is often painless.     

Cementless Spotorno tapered titanium stems

We evaluated the clinical and radiographic results of the first consecutive 154 implantations of a cementless, double-tapered straight femoral stem (cementless Spotorno (CLS), Sulzer Orthopedics) in 141 patients under the age of 55 (mean 47 (13–55)) years. After a mean follow-up of 12 (10–15) years, 11 patients (11 hips) had died and 7 (7 hips) could not be located. 5 patients (5 hips) underwent femoral revision—1 for infection, 1 for periprosthetic fracture and 3 for aseptic loosening of the stem. The overall survival rate of the stem was 97% at 12 years (95% confidence limits, 93%–100%), and survival with femoral revision for aseptic loosening as an end point 98 (95–100)%. The survival rate of the acetabular components was 78 (71–85) % after 12 years. The median Harris hip score at follow-up was 84 points. None of the patients had thigh pain. Radiolucent lines in Gruen regions 1 and 7 were present in 21 hips (17%). 2 hips had radiolucent lines in regions 2–6 on anteroposterior (AP) radiographs. No femoral osteolysis was detected.

The mid- to long-term survival with this type of femoral component is excellent and compares favorably with cemented stems in this age group. However, the high rate of cup loosening and the low Harris hip scores are a concern in this subgroup of young patients.     

The Wisconsin noncemented femoral stem: A prospective study with 5 to 9 years of follow-up evaluation

In an attempt to decrease aseptic loosening, total joint components are now being used without cement. Most components are designed to achieve fixation biologically. The radiographic results of 144 primary uncemented total hip arthroplastics and the clinical results of 89 arthroplastics that were performed using a proximally porous-coated titanium alloy femoral stem between November 1983 and June 1989 are reported. On the acetabular side, a threaded component or a hemispherical porous-coated component was used. The patients were followed prospectively for 5 to 9 years postsurgery. During the study period, the threaded acetabular component had a high failure rate. Because it was not possible to determine accurately from which component a particular sign or symptom arose, clinical analysis was restricted to only those hips without a failed or revised cup. Eighty-nine hips in 71 patients with a minimum follow-up period of 5 years were available for clinical review. Radiographic review of the femoral stem was completed on all hips with 5 or more years of radiographic follow-up evaluation, regardless of the status of the acetabular component. One hundred twelve hips in 85 patients were analyzed radiographically. At a latest mean follow-up period of 6.7 years, the mean Iowa hip score was 91.4 ± 8.0 with a 5.4% incidence of thigh pain. Throughout the followup period, the patients with thigh pain had a statistically lower mean Iowa pain subscore when compared with those patients without thigh pain (P = .0001). Endosteal erosion was seen in two hips (1.8%) and longitudinal loss of the medial neck greater than 2 mm was noted in two hips. One femoral stem was revised for aseptic loosening. The clinical results of this femoral stem equal ot exceed the published accounts of other uncemented arthroplasties. The results indicate that the stem is associated with good clinical results, minimal bone loss, and little osteolysis. Continued follow-up evaluation of patients with this femoral stem is necessary to assess the durability of these encouraging results.     

Clinical and radiographic assessment of cementless acetabular revision with morsellised allografts

The aim of this study was to evaluate the clinical and radiographic results of cementless acetabular revision with deep frozen morsellised allografts. Sixty-one patients (65 hips) underwent acetabular revision using cementless components and deep frozen morsellised allografts. Fifty-seven hips (53 patients) were reviewed at a mean of 105.1 months (range 72–180 months) after revision. The study group included 29 males and 24 females with a mean age of 46.4 years. One cup underwent further revision for aseptic loosening and two were defined as radiographic failures. The mean time for allograft incorporation was 12.5 months (range 6–24 months) after index surgery. The mean Harris hip score of the patients improved from 61.1 points preoperatively to 91.6 points postoperatively. Linear and cavitary osteolysis was observed in two and 12 hips, respectively. The acetabular revision using cementless components with deep frozen morsellized allografts provides favourable clinical and radiographic results, although the initial disease and age may adversely affect the outcomes.     

Dual-mobility cups in total hip arthroplasty after femoral neck fractures: A retrospective study comparing outcomes between cemented and cementless fixation

IntroductionTotal hip arthroplasty (THA) after femoral neck fracture (FNF) is associated with an increased risk of dislocation. The goals of our study were (1) to determine dislocation and revision rates when dual-mobility cups (DMCs) are used in these patients, (2) to analyze clinical and radiographic outcomes, survivorship, complications and mortality rate, and (3) to compare results between cemented and cementless cups.Patients and methodsWe retrospectively reviewed patients with FNF treated using DMC-THA between 2011 and 2018. A minimum 2-year follow-up was required for clinical and radiographic assessment. The clinical outcome was assessed using the Harris Hip Score (HHS) and Merlé D´Aubigné-Postel score (MDP). Radiolucent lines, osteolysis and cup loosening were analyzed.ResultsWe included 105 patients (105 hips) with a mean age of 75.5 years. There were no dislocations. One patient (1.0%) underwent cup revision at 39 months for aseptic cup loosening. The mean HHS and MDP were 80.5 and 14.2 respectively at a mean follow-up of 4.1 years. A higher MDP was found in patients with cementless rather than cemented cups (15.0 vs. 13.1; p = 0.006). Four patients had radiolucent lines > 1 mm, around cemented cups. At 6.8 years, estimated cup survival was 98.2% for revision for aseptic loosening and 97.3% for revision for any reason. The mortality rates were 6.7% at 1 year and 23.8% at last follow-up.ConclusionOur findings suggest that using DMC in THA for FNF may prevent dislocation with a low revision rate. Cementless cups had a higher MDP than cemented cups.     

Cementless Lord total hip arthroplasty: Cup loosening common after minimum 10-year follow-up of 103 hips

We evaluated the clinical and radiographic results of 103 (88 patients) cementless Lord total hip arthroplasty after a mean follow-up period of 12.5 (10-16) years. 77 hips had arthrosis, 15 rheumatoid arthritis and 11 osteonecrosis. The preoperative mean Harris Hip Score improved from 47 (19-66) to 87 (62-99) at 5 years, but declined to 77 (56-97) at the final examination. The survivorship of the cup, using radiographically confirmed aseptic loosening as the end point, was 63% at 10 years and 45% at 15 years and the survivorship of the stem was 97% at 10 years and 96% at 15 years. The low figures of the cup may be due to insufficient contact between the smooth-surfaced threads of the cup and the acetabular bone. Thinner polyethylene, insufficient initial bone coverage, and larger femoral head diameter were significantly related to the occurrence of loosening. We can not recommend this smooth-surfaced threaded cup because of its high failure.     

Cementless Lord total hip arthroplasty: cup loosening common after minimum 10-year follow-up of 103 hips

We evaluated the clinical and radiographic results of 103 (88 patients) cementless Lord total hip arthroplasty after a mean follow-up period of 12.5 (10-16) years. 77 hips had arthrosis, 15 rheumatoid arthritis and 11 osteonecrosis. The preoperative mean Harris Hip Score improved from 47 (19-66) to 87 (62-99) at 5 years, but declined to 77 (56-97) at the final examination. The survivorship of the cup, using radiographically confirmed aseptic loosening as the end point, was 63% at 10 years and 45% at 15 years and the survivorship of the stem was 97% at 10 years and 96% at 15 years. The low figures of the cup may be due to insufficient contact between the smooth-surfaced threads of the cup and the acetabular bone. Thinner polyethylene, insufficient initial bone coverage, and larger femoral head diameter were significantly related to the occurrence of loosening. We can not recommend this smooth-surfaced threaded cup because of its high failure.