Optimization for glimepiride dissolution enhancement utilizing different carriers and techniques

The present work is a comparative study that matches between carriers and techniques used to prepare solid mixtures with glimepiride. The study is directed towards elucidation of the most promising carrier capable of highly improving drug dissolution along with the most successful technique used for drug formulation. Mixtures were tested for drug content and dissolution. The most optimum formulae were characterized by DSC, IR and XRPD. Kinetic treatment of dissolution data was performed for physical and co-ground mixtures, solid dispersions and their adsorbates, triple solid dispersions and their adsorbates, microwave generated or treated solid dispersions. Results revealed that enhancing effect mostly reached maximum with ternary solid dispersion adsorbate (TSDads). The latter technique demonstrated a dramatic increase in drug dissolution rate which was reflected in the shortest half-life for most carriers at variable degrees. The highest dissolution rate was attained with pregelatinized starch and decreased to variable degrees with remaining carriers. Differences were ascribed to chemical nature as well as relative water solubility of carriers. The combined effects of incorporating surfactants, polymers and adsorbents to glimepiride contributed together to improve wetting, reduce crystallinity and caused substantial increase in the surface area which made TSDads the most promising technique for enhancing dissolution of glimepiride.     

Studies on Flash Evaporation for Preparation of Porous Solid Dispersions Using Piroxicam as a Model Drug

An amalgamation of solid dispersion and capillarity has been attempted in present study for enhancement of dissolution rate of poorly soluble drugs. Flash evaporation technique was utilized for enhancement of the dissolution rate of piroxicam. One of the major problems with this drug is its very low solubility in biological fluids, which results in poor bioavailability after oral administration. An attempt was made to enhance the dissolution rate of piroxicam by converting it into porous solid dispersion by flash evaporation method using polyvinylpyrrolidone (PVP) 40,000 as a water-soluble carrier. The resulting solid dispersions were characterized by DSC, FTIR, and X-ray diffraction. In vitro dissolution study revealed significant improvement of dissolution profile of piroxicam. The release of drug from porous solid dispersions containing PVP was superior to those of marketed product, conventional nonporous solid dispersion prepared by solvent evaporation method and drug alone. The steep increase in dissolution rate of porous form is attributable to combined effect of solid dispersion and capillarity.     

Characteristics of Rofecoxib-Polyethylene Glycol 4000 Solid Dispersions and Tablets Based on Solid Dispersions

The aim of this work was to report the properties of rofecoxib-PEG 4000 solid dispersions and tablets prepared using rofecoxib solid dispersions. Rofecoxib is a poorly water soluble nonsteroidal anti-inflammatory drug with a poor dissolution profile. This work investigated the possibility of developing rofecoxib tablets, allowing fast, reproducible, and complete rofecoxib dissolution, by using rofecoxib solid dispersion in polyethylene glycol (PEG) 4000. Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the solid state of solid dispersions. The effect of PEG 4000 concentration on the dissolution rate of rofecoxib from its solid dispersions was investigated. The dissolution rate of rofecoxib from its solid dispersions increased with an increasing amount of PEG 4000. The extent of dissolution rate enhancement was estimated by calculating the mean dissolution time (MDT) values. The MDT of rofecoxib decreased significantly after preparing its solid dispersions with PEG 4000. The FTIR spectroscopic studies showed the stability of rofecoxib and absence of well-defined rofecoxib-PEG 4000 interaction. The DSC and XRD studies indicated the amorphous state of rofecoxib in solid dispersions of rofecoxib with PEG 4000. SEM pictures showed the formation of effective solid dispersions of rofecoxib with PEG 4000 since well-defined change in the surface nature of rofecoxib and solid dispersions were observed. Solid dispersions formulation with highest drug dissolution rate (rofecoxib: PEG 4000 1:10 ratio) was used for the preparation of solid dispersion–based rofecoxib tablets by the direct compression method. Solid dispersion–based rofecoxib tablets obtained by direct compression, with a hardness of 8.1 Kp exhibited rapid drug dissolution and produced quick anti-inflammatory activity when compared to conventional tablets containing pure rofecoxib at the same drug dosage. This indicated that the improved dissolution rate and quick anti-inflammatory activity of rofecoxib can be obtained from its solid dispersion–based oral tablets.     

Preparation and characterization of emulsified solid dispersions containing docetaxel

An emulsified solid dispersion of docetaxel was prepared and characterized in vitro. In contrast to conventional solid dispersions, emulsifying pharmaceutical excipients and hydroxypropyl methylcellulose (HPMC) as a supersaturation promoter were introduced into the PEG6000-based solid dispersion to further improve its solubilizing capability. The solubility, dissolution in vitro and stability of the prepared emulsified solid dispersions were studied taking into consideration of the effects of different emulsifying excipients, preparation methods and the media. Results of the emulsified solid dispersion of docetaxel showed that the solubility and dissolution at 2 h were 34.2- and 12.7-fold higher than the crude powder. The type of emulsifying excipient used had a significant influence on the dissolution of the emulsified solid dispersion. The dissolution of the emulsified solid dispersion prepared by the solvent-melting method or the solvent method was higher than the melting method. There were no apparent differences among the dissolution media utilized. The status of the drug in the emulsified solid dispersion was observed in an amorphous or a molecular dispersion state by differential thermal analysis and powder Xray diffraction. In conclusion, the incorporation of emulsifying pharmaceutical excipients and HPMC with polymers into a solid dispersion could be a new and useful tool to greatly increase the solubility and dissolution of poorly water-soluble drugs.     

卡维地洛固体分散体的制备及其体外溶出度的测定

目的 :制备卡维地洛固体分散体 ,提高其溶解度和溶速率。方法 :以聚乙烯吡咯烷酮 (PVP)、聚乙二醇 -6000(PEG -6000)为载体 ,以溶剂法和熔融法制备固体分散体 ,并进行体外溶出度研究。结果 :载体比例越大 ,药物溶出愈快 ;载体比例愈小 ,差异愈显著。载体为PVP所制固体分散体的体外溶出行为总体优于载体为PEG -6000的固体分散体。结论 :本试验所制卡维地洛固体分散体能加速体外溶出 ,提高生物利用度 ,可用于制备高效制剂     

The dissolution enhancement of piroxicam in its physical mixtures and solid dispersion formulations using gluconolactone and glucosamine hydrochloride as potential carriers

Abstract

The solid dispersion technique is one of the most effective methods for improving the dissolution rate of poorly water-soluble drugs; however this is reliant on a suitable carrier and solvent being selected. The work presented explores amino sugars (d-glucosamine HCl and d-gluconolactone) as potential hydrophilic carriers to improve dissolution rate of a poorly water-soluble drug, piroxicam, from physical mixtures and solid dispersion formulations. Solid dispersions of the drug and carrier were prepared using different ratios by the conventional solvent evaporation method. Acetone was used as solvent in the preparation of solid dispersions. Physical mixtures of piroxicam and carrier were also prepared for comparison. The properties of all solid dispersions and physical mixtures were studied using a dissolution tester, Fourier transform infrared, XRD, SEM and differential scanning calorimetry. These results showed that the presence of glucosamine or gluconolactone can increase dissolution rate of piroxicam compared to pure piroxicam. Glucosamine or Gluconolactone could be used as carrier in solid dispersion formulations and physical mixtures to enhance the dissolution rate. Solid state studies showed that no significant changes occurred for piroxicam in physical mixtures and solid dispersion.     

Improvement of the dissolution kinetics of SR 33557 by means of solid dispersions containing PEG 6000

Solid dispersions of SR 33557 in preparations containing from 30 to 80% w/w polyethylene glycol 6000 (PEG 6000) were prepared by the fusion method. The solubility of the drug substance either alone or in solid dispersions was determined in pH 1.2 and 4.5 media (extraction fluid NFXII, without enzyme). A large increase in the solubility was noted from the 80% w/w PEG preparation. A wettability study performed by measuring the contact angle on tablets of either drug substance or PEG 6000, or solid dispersions, revealed a minimal contact angle for the 80% w/w PEG 6000 solid dispersion (eutectic composition of SR 33557/PEG 6000 phase diagram). Dissolution kinetic analysis performed at pH 1.2 on all solid dispersions, on the physical mixtures containing 70 and 80% w/w PEG 6000, and on SR 33557 alone, showed a maximum release rate (100%) for the solid dispersions containing 70 and 80% w/w PEG 6000. The dissolution rate of the physical mixtures was faster than that of the drug substance alone but remained, however, lower than that of the solid dispersions, at the same composition. It was also observed that the dissolution rate, at pH 1.2 and 4.5, of the 70% w/w PEG 6000 solid dispersion was practically pH independent, which was not the case for the drug substance alone. The latter solid dispersion showed a slowing down of the dissolution kinetics after 3 months storage at 50°C whereas no change in the dissolution rate was observed following storage for 12 months at 25°C.     

Preparation and characterization of solid dispersions of Quercetin with PEG4000

Objective To enhance the solubility,quicken the speed of digesting and absorption,and increase the bioavailability of quercetin(3,3',4',5,7-pentahydroxyflavone).Methods A series of Quercetin-PEG4000 solid dispersions were prepared by fusion method.The configuration and property of solid dispersion were characterized by solubility tests,dissolution tests,FTIR spectra,differential scanning calorimetry(DSC)and microphotograph.Results 1.According to solubility tests the the mass ratio of quercetin to PEG4000 affected strongly on the solubility of solid dispersions,on the whole,the relation of the solubility of solid dispersions to the mass ratio presented linear relationship.The preparation temperature had little effect on the solubility of solid dispersions.The surface-active agent,polysorbate80 increased strongly the solubility of solid dispersions.2.According to the dissolution tests,the mass ratio of quercetin to PEG4000 affected strongly on the dissolution of solid dispersions,the preparation temperature had little effect on the dissolution of solid dispersions.The surface-active agent,polysorbate80 increased strongly the dissolution of solid dispersions,and after addition polysorbate80,the dissolution of solid dispersions was two times of the dissolution of solid dispersions without polysorbate80.3.According to the DSC results,except that a little of quercetin molecular existed as crystalline state in the solid dispersion with the mass ratio was qu:PEG=1:2,quercetin existed as amorphous phase in other mass ratio solid dispersion.4.According to the FTIR spectra and microphotograph results,the relation of quercetin and PEG4000 was mainly physical mixing in quercetin-PEG4000 solid dispersion.Quercetin was just like solute in solution,and PEG4000 was just like solvent in solution.The force between quercetin and PEG4000 was mainly hydrogen bonding,so the biological activity of quercetin would not be influenced greatly after the formation solid dispersion.Conclusions These results suggest that quercetin existed mainly as amorphous phase in solid dispersion;the solubility and the dissolution in water were increased obviously after formation the solid dispersion.     

Preparation of evodiamine solid dispersions and its pharmacokinetics

In order to increase the dissolution rate and bioavailability, solid dispersions of evodiamine in PVP K(30) with different enriched samples of evodiamine to PVP K(30) ratios were prepared by solvent method. Our studies showed that the dissolution rate of evodiamine was significantly higher in the solid dispersion system in comparison with that in enriched samples of evodiamine or physical mixtures. The increase of the dissolution rate was evidently related to the ratio of evodiamine to PVP K(30). The solid dispersion system (enriched samples of evodiamine/PVP K(30)= 1/6, w/w) gave the highest dissolution rate: about 27.7-fold higher than that of enriched samples of evodiamine in hard capsules. Powder X-ray diffraction studies showed that enriched samples of evodiamine presented a total chemical stability after its preparation as solid dispersions. In vivo administration studies indicated that solid dispersions of evodiamine in hard capsules had a higher C(max) and a shorter T(max) than those of physical mixture in hard capsules, and the differences of C(max) and T(max) between them were significant. These results suggest that solid dispersions of evodiamine in hard capsules has a notably faster and greater absorption rate than enriched samples of evodiamine in physical mixture hard capsule and corresponds with the in vitro dissolution.     

阿德福韦酯-PEG6000固体分散体的制备

目的将难溶性药物阿德福韦酯制备成固体分散体,以增加体外溶出度。方法以聚乙二醇6000(polyethylene glycol 6000,PEG6000)为载体,采用熔融法制备阿德福韦酯固体分散体;配合差示扫描量热(differential scanning calorimetry,DSC)与X-射线衍射(X-ray diffraction,XRD)观察药物在载体中的存在状态;考察相对湿度(relative humidity,RH)75%40℃放置3个月固体分散体对溶出度的变化及载体-药物质量比对溶出的影响。结果阿德福韦酯以无定型状态存在于固体分散体中,相对湿度RH75%40℃放置3个月固体分散体对溶出度改善明显,载体-药物质量比不同,药物的溶出度不同。结论将阿德福韦酯制成固体分散体能显著增加阿德福韦酯的体外溶出度。     

Characteristics of rofecoxib-polyethylene glycol 4000 solid dispersions and tablets based on solid dispersions

The aim of this work was to report the properties of rofecoxib-PEG 4000 solid dispersions and tablets prepared using rofecoxib solid dispersions. Rofecoxib is a poorly water soluble nonsteroidal anti-inflammatory drug with a poor dissolution profile. This work investigated the possibility of developing rofecoxib tablets, allowing fast, reproducible, and complete rofecoxib dissolution, by using rofecoxib solid dispersion in polyethylene glycol (PEG) 4000. Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the solid state of solid dispersions. The effect of PEG 4000 concentration on the dissolution rate of rofecoxib from its solid dispersions was investigated. The dissolution rate of rofecoxib from its solid dispersions increased with an increasing amount of PEG 4000. The extent of dissolution rate enhancement was estimated by calculating the mean dissolution time (MDT) values. The MDT of rofecoxib decreased significantly after preparing its solid dispersions with PEG 4000. The FTIR spectroscopic studies showed the stability of rofecoxib and absence of well-defined rofecoxib-PEG 4000 interaction. The DSC and XRD studies indicated the amorphous state of rofecoxib in solid dispersions of rofecoxib with PEG 4000. SEM pictures showed the formation of effective solid dispersions of rofecoxib with PEG 4000 since well-defined change in the surface nature of rofecoxib and solid dispersions were observed. Solid dispersions formulation with highest drug dissolution rate (rofecoxib: PEG 4000 1:10 ratio) was used for the preparation of solid dispersion-based rofecoxib tablets by the direct compression method. Solid dispersion-based rofecoxib tablets obtained by direct compression, with a hardness of 8.1 Kp exhibited rapid drug dissolution and produced quick anti-inflammatory activity when compared to conventional tablets containing pure rofecoxib at the same drug dosage. This indicated that the improved dissolution rate and quick anti-inflammatory activity of rofecoxib can be obtained from its solid dispersion-based oral tablets.     

酮洛芬-聚乙烯吡咯烷酮固体分散物的制备及其体外溶出度的研究

目的提高难溶性药物酮洛芬体外溶出速度。方法以聚乙烯吡咯烷酮(PVPK30)为载体,制备药物与载体不同比例的固体分散物及物理混合物,采用X射线衍射和红外吸收方法,比较二者及药物的结晶形态,并进行体外药物溶出度的测定。结果固体分散物体外溶出速率明显高于物理混合物及酮洛芬原料的体外溶出速度,且随载体比例增加而增大。固体分散物的X射线衍射及红外吸收图谱确定了酮洛芬以无定形态分散在载体中,放置6个月后,固体分散物X射线衍射图谱没有明显变化。结论药物与载体以合适比例制备的固体分散物可以明显提高药物体外溶出速度。     

In vitro Dissolution Studies on Solid Dispersions of Mefenamic Acid

Solid dispersions of mefanamic acid with a water-soluble polymer polyvinyl pyrrolidine and a super disintegrant, primojel were prepared by common solvent and solvent evaporation methods employing methanol as the solvent. The dissolution rate and dissolution efficiency of the prepared solid dispersions were evaluated in comparison to the corresponding pure drug. Solid dispersions of mefenamic acid showed a marked enhancement in dissolution rate and dissolution efficiency. At 1:4 ratio of mefenamic acid-primojel a 2.61 fold increase in the dissolution rate of mefenamic acid was observed with solid dispersion. The solid dispersions in combined carriers gave much higher rates of dissolution than super disintegrants alone. Mefanamic acid-primojel-polyvinyl pyrrolidine (1:3.2:0.8) solid dispersion gave a 4.11 fold increase in the dissolution rate of mefenamic acid. Super disintegrants alone or in combination with polyvinyl pyrrolidine could be used to enhance the dissolution rate of mefenamic acid.     

Dissolution properties of control released solid dispersion of carvedilol with HPMC and Eudragit RS

In this study, solid dispersion for carvedilol was prepared by using spray-drying method. Solid dispersions were formulated with carvedilol and Eudragit RS and hydroxypropyl methylcellulose to control the dissolution rates of carvedilol. Scanning electron microscope was used to analyze surface of solid dispersion samples. Differential scanning calorimetry and powder X-ray diffraction were used to analyze the crystallinity of solid dispersions. Fourier transform infrared spectroscopy was used to analyze the change in chemical structure of solid dispersions. The release behavior of solid dispersion analyzed at simulated gastric fluid (pH 1.2) in in vitro study. The dissolution rate of carvedilol was higher than active pharmaceutical ingredient. In conclusion, we can control the dissolution rate by solid dispersion using biomedical polymers.     

Silymarin-solid dispersions: characterization and influence of preparation methods on dissolution

The influence of preparation methodology of silymarin solid dispersions using a hydrophilic polymer on the dissolution performance of silymarin was investigated. Silymarin solid dispersions were prepared using HPMC E 15LV by kneading, spray drying and co-precipitation methods and characterized by FTIR, DSC, XRPD and SEM. Dissolution profiles were compared by statistical and model independent methods. The FTIR and DSC studies revealed weak hydrogen bond formation between the drug and polymer, while XRPD and SEM confirmed the amorphous nature of the drug in co-precipitated solid dispersion. Enhanced dissolution compared to pure drug was found in the following order: co-precipitation > spray drying > kneading methodology (p < 0.05). All preparation methods enhanced silymarin dissolution from solid dispersions of different characteristics. The co-precipitation method proved to be best and provided a stable amorphous solid dispersion with 2.5 improved dissolution compared to the pure drug.     

托伐普坦固体分散体的制备及体外溶出特性考察

目的 采用固体分散技术提高难溶性药物托伐普坦的体外溶出度。方法 选用聚维酮K_29/32为载体材料,以溶剂蒸发法制备托伐普坦固体分散体。采用差示扫描量热法(DSC)、X-射线粉末衍射法(XRPD)对所得固体分散体进行鉴定, 并进行溶解度、体外溶出实验。结果 固体分散体的DSC 图谱及X-射线粉末衍射确定了托伐普坦以无定形态分散在载体中, 体外溶解实验表明其溶出较原料药、物理混合物均有明显提高。结论 将托伐普坦与PVP K_29/32制成固体分散体,其分散状态发生了改变,溶出性能明显提高。     

Mechanism of increased dissolution of diazepam and temazepam from polyethylene glycol 6000 solid dispersions

Solid dispersion literature, describing the mechanism of dissolution of drug-polyethylene glycol dispersions, still shows some gaps; (A). only few studies include experiments evaluating solid solution formation and the particle size of the drug in the dispersion particles, two factors that can have a profound effect on the dissolution. (B). Solid dispersion preparation involves a recrystallisation process (which is known to be highly sensitive to the recrystallisation conditions) of polyethylene glycol and possibly also of the drug. Therefore, it is of extreme importance that all experiments are performed on dispersion aliquots, which can be believed to be physico-chemical identical. This is not always the case. (C). Polyethylene glycol 6000 (PEG6000) crystallises forming lamellae with chains either fully extended or folded once or twice depending on the crystallisation conditions. Recently, a high resolution differential scanning calorimetry (DSC)-method, capable of evaluating qualitatively and quantitatively the polymorphic behaviour of PEG6000, has been reported. Unraveling the relationship between the polymorphic behavior of PEG6000 in a solid dispersion and the dissolution characteristics of that dispersion, is a real gain to our knowledge of solid dispersions, since this has never been thoroughly investigated. The aim of the present study was to fill up the three above mentioned gaps in solid dispersion literature. Therefore, physical mixtures and solid dispersions were prepared and in order to unravel the relationship between their physico-chemical properties and dissolution characteristics, pure drugs (diazepam, temazepam), polymer (PEG6000), solid dispersions and physical mixtures were characterised by DSC, X-ray powder diffraction (Guinier and Bragg-Brentano method), FT-IR spectroscopy, dissolution and solubility experiments and the particle size of the drug in the dispersion particles was estimated using a newly developed method. Addition of PEG6000 improves the dissolution rate of both drugs. Mechanisms involved are solubilisation and improved wetting of the drug in the polyethylene glycol rich micro-environment formed at the surface of drug crystals after dissolution of the polymer. Formulation of solid dispersions did not further improve the dissolution rate compared with physical mixtures. X-ray spectra show that both drugs are in a highly crystalline state in the solid dispersions, while no significant changes in the lattice spacings of PEG6000 indicate the absence of solid solution formation. IR spectra show the absence of a hydrogen bonding interaction between the benzodiazepines and PEG6000. Furthermore, it was concluded that the reduction of the mean drug particle size by preparing solid dispersions with PEG6000 is limited and that the influence of the polymorphic behavior of PEG6000 (as observed by DSC) on the dissolution was negligible.     

盐酸溴己新固体分散体制备及体外溶出实验

目的制备盐酸溴己新（BH）固体分散体并研究其体外溶出度。方法以聚乙烯吡咯烷酮（PVP）为载体,采用喷雾干燥法制备难溶性药物盐酸溴己新固体分散体,并进行体外溶出实验。结果制备成的固体分散体能显著提高盐酸溴己新的体外溶出速率,PVPk-15载体的固体分散体溶出较PVPk-30载体的固体分散体快。随着PVPk-15载体比例增加,固体分散体的溶出先增大后减小,BH-PVPk-15为1∶5时的固体分散体具有良好的体外速释作用。结论将盐酸溴己新制成固体分散体能明显提高其溶解度及体外释放速率。     

尼群地平固体分散体体外溶出度研究

目的:选择尼群地平固体分散体适宜的体外溶出介质。方法:测定尼群地平在多种溶出介质中的溶解度，通过体外溶出度试验比较尼群地平固体分散体在不同溶出介质中的溶出行为。结果:溶出介质1.0%和0.5%的十二烷基硫酸钠(SDS)水溶液可以满足“漏槽”条件，但药物释放较快，固体分散体间的溶出行为差异不明显；0.3%的SDS水溶液可以保证药物的全部溶出，且可以明显区别各固体分散体之间的溶出差异。结论:选用0.3%的SDS水溶液作为溶出介质，便于通过溶出度试验来筛选固体分散体处方。     

固体分散体提高银杏叶片溶出度的研究

目的:通过制备固体分散体提高银杏叶片中银杏叶提取物(EGb)的溶出度.方法:采用溶剂熔融法、喷雾干燥法制备聚乙二醇6000(PEG 6000)和聚乙烯吡咯烷酮K17(PVPK17)2种载体材料、不同比例的固体分散体,并比较固体分散体、物理混合物和EGb、市售普通片的溶出特性.对EGb-PEG 6000固体分散体进行差示热扫描(DSC)分析.结果:溶剂熔融法和喷雾干燥法可制备不同比例的PEG 6000,PVPK17的EGb固体分散体,EGb-PEG 6000(1:2)固体分散体片溶出度增加明显,且增溶效果优干EGb-PVPK17固体分散体.结论:EGb-PEG 6000(1:2)固体分散体能有效提高银杏叶片的溶出度.