共查询到20条相似文献，搜索用时 31 毫秒
1.
Xia Lin Yang Hu Lei Liu Lili Su Na Li Jing Yu Bo Tang Ziyi Yang 《Pharmaceutical research》2018,35(6):125
Purpose
Amorphous solid dispersions (ASDs) have been widely used in the pharmaceutical industry for solubility enhancementof poorly water-soluble drugs. The physical stability, however, remainsone of the most challenging issues for the formulation development.Many factors can affect the physical stability via different mechanisms, and therefore an in-depth understanding on these factors isrequired.Methods
In this review, we intend to summarize the physical stability of ASDsfrom a physicochemical perspective whereby factors that can influence the physical stability areclassified into thermodynamic, kinetic and environmental aspects.Results
The drug-polymer miscibility and solubility are consideredas the main thermodynamicfactors which may determine the spontaneity of the occurrence of the physical instabilityof ASDs. Glass-transition temperature,molecular mobility, manufacturing process,physical stabilityof amorphous drugs, and drug-polymerinteractionsareconsideredas the kinetic factors which areassociated with the kinetic stability of ASDs on aging. Storage conditions including temperature and humidity could significantly affect the thermodynamicand kineticstabilityof ASDs.Conclusion
When designing amorphous solid dispersions, it isrecommended that these thermodynamic, kinetic and environmental aspects should be completely investigatedand compared to establish rationale formulations for amorphous solid dispersions with high physical stability.2.
Purpose
The aims of this study were twofold. First, to evaluate the effectiveness of selected polymers in inhibiting solution crystallization of celecoxib. Second, to compare the release rate and crystallization tendency of celecoxib amorphous solid dispersions (ASDs) formulated with a single polymer, or binary polymer combinations.Methods
The effectiveness of polymers, polyvinylpyrrolidone (PVP), hydroxypropylmethyl cellulose (HPMC) or HPMC acetate succinate (HPMCAS), in maintaining supersaturation of celecoxib solutions was evaluated by performing nucleation induction time measurements. Crystallization kinetics of ASD suspensions were monitored using Raman spectroscopy. Dissolution experiments were carried out under non-sink conditions.Results
Pure amorphous celecoxib crystallized rapidly through both matrix and solution pathways. Matrix and solution crystallization was inhibited when celecoxib was molecularly mixed with a polymer, resulting in release of the drug to form supersaturated solutions. Cellulosic polymers were more effective than PVP in maintaining supersaturation. Combining a cellulosic polymer and PVP enabled improved drug release and stability to crystallization.Conclusions
Inclusion of an effective solution crystallization inhibitor as a minor component in ternary dispersions resulted in prolonged supersaturation following dissolution. This study shows the feasibility of formulation strategies for ASDs where a major polymer component is used to achieve one key property e.g. release, while a minor polymer component is added to prevent crystallization.3.
Hitesh S. Purohit James D. Ormes Sugandha Saboo Yongchao Su Matthew S. Lamm Amanda K. P. Mann Lynne S. Taylor 《Pharmaceutical research》2017,34(7):1364-1377
Purpose
Miscibility between the drug and the polymer in an amorphous solid dispersion (ASD) is considered to be one of the most important factors impacting the solid state stability and dissolution performance of the active pharmaceutical ingredient (API). The research described herein utilizes emerging fluorescence-based methodologies to probe (im)miscibility of itraconazole (ITZ)-hydroxypropyl methylcellulose (HPMC) ASDs.Methods
The ASDs were prepared by solvent evaporation with varying evaporation rates and were characterized by steady-state fluorescence spectroscopy, confocal imaging, differential scanning calorimetry (DSC), and solid state nuclear magnetic resonance (ssNMR) spectroscopy.Results
The size of the phase separated domains for the ITZ-HPMC ASDs was affected by the solvent evaporation rate. Smaller domains (<10 nm) were observed in spray-dried ASDs, whereas larger domains (>30 nm) were found in ASDs prepared using slower evaporation rates. Confocal imaging provided visual confirmation of phase separation along with chemical specificity, achieved by selectively staining drug-rich and polymer-rich phases. ssNMR confirmed the results of fluorescence-based techniques and provided information on the size of phase separated domains.Conclusions
The fluorescence-based methodologies proved to be sensitive and rapid in detecting phase separation, even at the nanoscale, in the ITZ-HPMC ASDs. Fluorescence-based methods thus show promise for miscibility evaluation of spray-dried ASDs.4.
Surface Enrichment and Depletion of the Active Ingredient in Spray Dried Amorphous Solid Dispersions
Zhen Chen Kuan Yang Chengbin Huang Alan Zhu Lian Yu Feng Qian 《Pharmaceutical research》2018,35(2):38
Purpose
To study the effects of physicochemical properties of drug and polymer, as well as the drug-polymer interactions, on the surface composition of SDDs.Methods
Ethanol solutions containing a model drug (IMC, NMP or FCZ) and a model polymer (PVPK12, PVPK30 or PVP-VA) were spray dried, and the surface composition of SDDs was analyzed by XPS. The surface tensions of pure components and their solutions were measured using Wilhelmy plate and/or calculated using ACD/Labs. NMR and DLS were used to obtain the diffusion coefficients of IMC, NMP, PVPK12 and PVPK30 in solvents. Flory-Huggins interaction parameters for selected drug-polymer pairs were obtained using a melting point depression method.Results
Significant surface enrichment or depletion of the drug was observed in SDDs depending on the particular drug-polymer combination. With PVP as the dispersion polymer, IMC and NMP were surface enriched; whereas FCZ, a hydrophilic drug, was surface depleted. With increasing PVP molecular weight, the surface drug concentration increased, and the effect was greater in the NMP/PVP and FCZ/PVP systems than in the IMC/PVP system where strong drug-polymer interaction existed. Changing the polymer from PVP to PVP-VA reduced the surface concentration of the drug.Conclusions
The surface concentration of a SDD can be significantly different from the bulk concentration. The main results of this work are consistent with the notion that the relative surface tensions control surface enrichment or depletion. Besides, the relative diffusion rates of the components and the strength of their interactions may also affect the surface composition of the SDDs.5.
Wiebke Kempin Vanessa Domsta Georg Grathoff Iris Brecht Beatrice Semmling Susan Tillmann Werner Weitschies Anne Seidlitz 《Pharmaceutical research》2018,35(6):124
Purpose
Dissolution speeds of tablets printed via Fused Deposition Modeling (FDM) so far are significantly lower compared to powder or granule pressed immediate release tablets. The aim of this work was to print an actual immediate release tablet by choosing suitable polymers and printing designs, also taking into account lower processing temperatures (below 100°C) owing to the used model drug pantoprazole sodium.Methods
Five different pharmaceutical grade polymers polyvinylpyrrolidone (PVP K12), polyethylene glycol 6000 (PEG 6000), Kollidon® VA64, polyethylene glycol 20,000 (PEG 20,000) and poloxamer 407 were successfully hot-melt-extruded to drug loaded filaments and printed to tablets at the required low temperatures.Results
Tablets with the polymers PEG 6000 and PVP K12 and with a proportion of 10% pantoprazole sodium (w/w) demonstrated a fast drug release that was completed within 29 min or 10 min, respectively. By reducing the infill rate of PVP tablets to 50% and thereby increase the tablet porosity it was even possible to reduce the mean time for total drug release to only 3 min.Conclusions
The knowledge acquired through this work might be very beneficial for future FDM applications in the field of immediate release tablets especially with respect to thermo-sensitive drugs.6.
Yuejie Chen Shujing Wang Shan Wang Chengyu Liu Ching Su Michael Hageman Munir Hussain Roy Haskell Kevin Stefanski Feng Qian 《Pharmaceutical research》2016,33(10):2445-2458
Purpose
To identify the key formulation factors controlling the initial drug and polymer dissolution rates from an amorphous solid dispersion (ASD).Methods
Ketoconazole (KTZ) ASDs using PVP, PVP-VA, HMPC, or HPMC-AS as polymeric matrix were prepared. For each drug-polymer system, two types of formulations with the same composition were prepared: 1. Spray dried dispersion (SDD) that is homogenous at molecular level, 2. Physical blend of SDD (80% drug loading) and pure polymer (SDD-PB) that is homogenous only at powder level. Flory-Huggins interaction parameters (χ) between KTZ and the four polymers were obtained by Flory-Huggins model fitting. Solution 13C NMR and FT-IR were conducted to investigate the specific drug-polymer interaction in the solution and solid state, respectively. Intrinsic dissolution of both the drug and the polymer from ASDs were studied using a Higuchi style intrinsic dissolution apparatus. PXRD and confocal Raman microscopy were used to confirm the absence of drug crystallinity on the tablet surface before and after dissolution study.Results
In solid state, KTZ is completely miscible with PVP, PVP-VA, or HPMC-AS, demonstrated by the negative χ values of ?0.36, ?0.46, ?1.68, respectively; while is poorly miscible with HPMC shown by a positive χ value of 0.23. According to solution 13C NMR and FT-IR studies, KTZ interacts with HPMC-AS strongly through H-bonding and dipole induced interaction; with PVPs and PVP-VA moderately through dipole-induced interactions; and with HPMC weakly without detectable attractive interaction. Furthermore, the “apparent” strength of drug-polymer interaction, measured by the extent of peak shift on NMR or FT-IR spectra, increases with the increasing number of interacting drug-polymer pairs. For ASDs with the presence of considerable drug-polymer interactions, such as KTZ/PVPs, KTZ/PVP-VA, or KTZ /HPMC-AS systems, drug released at the same rate as the polymer when intimate drug-polymer mixing was ensured (i.e., the SDD systems); while drug released much slower than the polymer when molecular level mixing or drug-polymer interaction was absent (SDD-PB systems). For ASDs without drug-polymer interaction (i.e., KTZ/HPMC systems), the mixing homogeneity had little impact on the release rate of either the drug or the polymer thus SDD and SDD-PB demonstrated the same drug or polymer release rate, while the drug released slowly and independently of polymer release.Conclusions
The initial drug release from an ASD was controlled by 1) the polymer release rate; 2) the strength of drug-polymer interaction, including the intrinsic interaction caused by the chemistry of the drug and the polymer (measured by the χ value), as well as that the apparent interaction caused by the drug-polymer ratio (measure by the extent of peak shift on spectroscopic analysis); and 3) the level of mixing homogeneity between the drug and polymer. In summary, the selection of polymer, drug-polymer ratio, and ASD processing conditions have profound impacts on the dissolution behavior of ASDs.Graphical Abstract Relationship between initial drug and polymer dissolution rates from amorphous solid dispersions with different mixing uniformity and drug-polymer interactions
7.
Purpose
Amorphous solid dispersions (ASDs) formulated with acid-insoluble (enteric) polymers form suspensions in acidic media where the polymer is largely insoluble. However, a small amount of drug can dissolve and a supersaturated solution may be generated. The goal of this study was to gain insight into the leaching mechanisms of both drug and polymer from the suspended particles, studying the impact of solution additives such as surfactants.Methods
ASDs were prepared by spray drying lopinavir (LPV) with an enteric polymer, either hydroxypropylmethylcellulose acetate succinate (HPMCAS) or hydroxypropylmethylcellulose phthalate (HPMCP). Four surfactants and a suspending agent were added to the liquid media to evaluate the effect of these excipients on leaching. pH 3 and pH 5 buffers were used to investigate the effect of pH.Results
The extent of drug leaching from the amorphous formulation was proportional to the crystalline solubility of the drug in the same medium. All surfactants promoted solubilization of LPV with the exception of poloxamer and sodium dodecyl sulfate-HPMCP combinations. A small amount of polymer ionization significantly enhanced LPV leaching in solutions containing an ionic surfactant.Conclusions
The mechanism of enhanced leaching appeared to be solubilization, with the apparent supersaturation remaining the same for systems containing the same polymer.8.
Kristin Lehmkemper Samuel O. Kyeremateng Matthias Degenhardt Gabriele Sadowski 《Pharmaceutical research》2018,35(1):25
Purpose
The oral bioavailability of poorly water-soluble active pharmaceutical ingredients (APIs) can be improved by the preparation of amorphous solid dispersions (ASDs) where the API is dissolved in polymeric excipients. Desired properties of such ASDs like storage stability, dissolution behavior, and processability can be optimized by additional excipients. In this work, the influence of so-called low-molecular-weight excipients (LMWEs) on the phase behavior of ASDs was investigated.Method
Binary ASDs of an amorphous API, naproxen (NAP) or acetaminophen (APAP), embedded in poly-(vinylpyrrolidone-co-vinyl acetate) (PVPVA64) were chosen as reference systems. Polyethylene glycol 1500 (PEG1500), D-α-tocopherol polyethylene glycol 1000 succinate (TPGS1000), propylene glycol monocaprylate type II (Capryol? 90), and propylene glycol monolaurate type I (Lauroglycol? FCC) were used as LMWEs. The API solubility in the excipients and the glass-transition temperature of the ASDs were modeled using the Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT) and the Kwei equation, respectively, and compared to corresponding experimental data.Results
The API solubility curves in ternary systems with 90/10 wt%/wt% PVPVA64/LMWE ratios were very close to those in pure PVPVA64. However, the glass-transition temperatures of API/PVPVA64/LMWE ASDs were much lower than those of API/PVPVA64 ASDs. These effects were determined experimentally and agreed with the predictions using the PC-SAFT and Kwei models.Conclusion
The impact of the LMWEs on the thermodynamic stability of the ASDs is quite small while the kinetic stability is significantly decreased even by small LMWE amounts. PC-SAFT and the Kwei equation are suitable tools for predicting the influence of LMWEs on the ASD phase behavior.9.
Purpose
To improve the pharmaceutical properties of amorphous ciprofloxacin (CIP) succinate salts via formulation as polymer/amorphous salt solid dispersions (ASSDs).Methods
ASSDs consisting of an amorphous CIP/succinic acid 1:1 or 2:1 salt dispersed in PVP or Soluplus were produced by spray drying and ball milling. The solid state characteristics, miscibility, stability, solubility and passive transmembrane permeability of the ASSDs were then examined.Results
The ASSDs had higher glass transition and crystallization temperatures than the corresponding amorphous succinate salts, and were also more stable during long-term stability studies. The results of inverse gas chromatography and thermal analysis indicated that the salts and polymers form a miscible mixture. The solubility of the pure drug in water and biorelevant media was significantly increased by all of the formulations. The permeability of the ASSDs did not differ significantly from that of the amorphous CIP succinate salts, however all samples were less permeable than the pure crystalline drug.Conclusions
The formulation of amorphous CIP succinate salts as ASSDs with polymer improved their long-term stability, but did not significantly affect their solubility or permeability.10.
Tochukwu C. Okwuosa Dominika Stefaniak Basel Arafat Abdullah Isreb Ka-Wai Wan Mohamed A. Alhnan 《Pharmaceutical research》2016,33(11):2704-2712
Purpose
The fabrication of ready-to-use immediate release tablets via 3D printing provides a powerful tool to on-demand individualization of dosage form. This work aims to adapt a widely used pharmaceutical grade polymer, polyvinylpyrrolidone (PVP), for instant on-demand production of immediate release tablets via FDM 3D printing.Methods
Dipyridamole or theophylline loaded filaments were produced via processing a physical mixture of API (10%) and PVP in the presence of plasticizer through hot-melt extrusion (HME). Computer software was utilized to design a caplet-shaped tablet. The surface morphology of the printed tablet was assessed using scanning electron microscopy (SEM). The physical form of the drugs and its integrity following an FDM 3D printing were assessed using x-ray powder diffractometry (XRPD), thermal analysis and HPLC. In vitro drug release studies for all 3D printed tablets were conducted in a USP II dissolution apparatus.Results
Bridging 3D printing process with HME in the presence of a thermostable filler, talc, enabled the fabrication of immediate release tablets at temperatures as low as 110°C. The integrity of two model drugs was maintained following HME and FDM 3D printing. XRPD indicated that a portion of the loaded theophylline remained crystalline in the tablet. The fabricated tablets demonstrated excellent mechanical properties, acceptable in-batch variability and an immediate in vitro release pattern.Conclusions
Combining the advantages of PVP as an impeding polymer with FDM 3D printing at low temperatures, this approach holds a potential in expanding the spectrum of drugs that could be used in FDM 3D printing for on demand manufacturing of individualised dosage forms.11.
Purpose
The aim of this study was to investigate (i) the influence of drug solid-state (crystalline or dissolved in the polymer matrix) on the melt viscosity and (ii) the influence of the drug concentration, temperature and shear rate on polymer crystallization using rheological tests.Methods
Poly (ethylene oxide) (PEO) (100.000 g/mol) and physical mixtures (PM) containing 10–20–30–40% (w/w) ketoprofen or 10% (w/w) theophylline in PEO were rheologically characterized. Rheological tests were performed (frequency and temperature sweeps in oscillatory shear as well as shear-induced crystallization experiments) to obtain a thorough understanding of the flow behaviour and crystallization of PEO-drug dispersions.Results
Theophylline did not dissolve in PEO as the complex viscosity (η*) of the drug-polymer mixture increased as compared to that of neat PEO. In contrast, ketoprofen dissolved in PEO and acted as a plasticizer, decreasing η*. Acting as a nucleating agent, theophylline induced the crystallization of PEO upon cooling from the melt. On the other hand, ketoprofen inhibited crystallization upon cooling. Moreover, higher concentrations of ketoprofen in the drug-polymer mixture increasingly inhibited polymer crystallization. However, shear-induced crystallization was observed for all tested mixtures containing ketoprofen.Conclusion
The obtained rheological results are relevant for understanding and predicting HME processability (e.g., barrel temperature selection) and downstream processing such as injection moulding (e.g., mold temperature selection).12.
Purpose
Three- dimensional (3D) printing has received significant attention as a manufacturing process for pharmaceutical dosage forms. In this study, we used Fusion Deposition Modelling (FDM) in order to print “candy – like” formulations by imitating Starmix® sweets to prepare paediatric medicines with enhanced palatability.Methods
Hot melt extrusion processing (HME) was coupled with FDM to prepare extruded filaments of indomethacin (IND), hypromellose acetate succinate (HPMCAS) and polyethylene glycol (PEG) formulations and subsequently feed them in the 3D printer. The shapes of the Starmix® objects were printed in the form of a heart, ring, bottle, ring, bear and lion. Differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD), Fourier Transform Infra-red Spectroscopy (FT-IR) and confocal Raman analysis were used to assess the drug – excipient interactions and the content uniformity.Results
Physicochemical analysis showed the presence of molecularly dispersed IND in the printed tablets. In vivo taste masking evaluation demonstrated excellent masking of the drug bitterness. The printed forms were evaluated for drug dissolution and showed immediate IND release independently of the printed shape, within 60 min.Conclusions
3D printing was used successfully to process drug loaded filaments for the development of paediatric printed tablets in the form of Starmix® designs.13.
Frederick Osei-Yeboah Shao-Yu Chang Changquan Calvin Sun 《Pharmaceutical research》2016,33(5):1126-1132
Purpose
Although the bonding area (BA) and bonding strength (BS) interplay is used to explain complex tableting behaviors, it has never been experimentally proven. The purpose of this study is to unambiguously establish the distinct contributions of each by decoupling the contributions from BA and BS.Methods
To modulate BA, a Soluplus® powder was compressed into tablets at different temperatures and then broken following equilibration at 25°C. To modulate BS, tablets were equilibrated at different temperatures. To simultaneously modulate BA and BS, both powder compression and tablet breaking test were carried out at different temperatures.Results
Lower tablet tensile strength is observed when the powder is compressed at a lower temperature but broken at 25°C. This is consistent with the increased resistance to polymer deformation at lower temperatures. When equilibrated at different temperatures, the tensile strength of tablets prepared under identical conditions increases with decreasing storage temperature, indicating that BS is higher at a lower temperature. When powder compression and tablet breaking are carried out at the same temperature, the profile with a maximum tensile strength at 4°C is observed due to the BA-BS interplay.Conclusion
By systematically varying temperature during tablet compression and breaking, we have experimentally demonstrated the phenomenon of BA-BS interplay in tableting.14.
Rizzo M Lamers CT Sauer CG Ramaekers JG Bechara A Andersen GJ 《Psychopharmacology》2005,179(3):559-566
Rationale
Illicit drug use can increase driver crash risk due to loss of control over vehicle trajectory. This study asks, does recreational use of ±3,4-Methylenedioxymethamphetamine (MDMA; ecstasy) and tetrahydrocannabinol (THC; marijuana) impair cognitive processes that help direct our safe movement through the world?Objective
This study assesses the residual effects of combined MDMA/THC use, and of THC use alone, upon perceived trajectory of travel.Methods
Perception of self-motion, or heading, from optical flow patterns was assessed using stimuli comprising random dot ground planes presented at three different densities and eight heading angles (1, 2, 4 and 8° to the left or right). On each trial, subjects reported if direction of travel was to the left or the right.Results
Results showed impairments in both drug groups, with the MDMA/THC group performing the worst.Conclusions
The finding that these psychoactive agents adversely affect heading perception, even in recently abstinent users, raises potential concerns about MDMA use and driving ability.15.
N. D. Vlieland M. R. Nejadnik H. Gardarsdottir S. Romeijn A. S. Sediq M. L. Bouvy A. C. G. Egberts B. J. F. van den Bemt W. Jiskoot 《Pharmaceutical research》2018,35(2):42
Purpose
To measure aggregate and particle formation in tumor necrosis factor-alpha (TNF-α) inhibitors etanercept, adalimumab and certolizumab pegol product samples after exposure to freezing temperature conditions similar to storage conditions previously observed in patients’ homes.Methods
TNF-α inhibitors in their original primary and secondary packaging were exposed to 32 freeze-thaw cycles (?10°C for 120min/5°C for 60 min) or continuous low storage temperature (?20°C for 96 h) before thawing at 2–8°C. Non-stressed products were used as controls. The products were analyzed by high pressure size exclusion chromatography (HP-SEC), dynamic light scattering (DLS), nanoparticle tracking analysis (NTA), micro-flow imaging (MFI) and second derivative ultraviolet (UV) spectroscopy.Results
Ten out of twenty-one stressed product samples (47.6%) showed increased particle numbers in the submicron and micron size range when compared to controls. For each product, DLS, MFI and NTA detected an increase in particle level in at least one stressed syringe (both continuous freezing and freeze-thaw), whereas HP-SEC and UV spectroscopy showed no differences between stressed and non-stressed products.Conclusion
TNF-α inhibitors are relatively resistant to freezing temperatures similar to storage conditions previously observed in patients’ homes. However, almost half of the stressed product samples showed formation of particles in the submicron and micron size range.16.
Pei T. Mah Dunja Novakovic Jukka Saarinen Stijn Van Landeghem Leena Peltonen Timo Laaksonen Antti Isomäki Clare J. Strachan 《Pharmaceutical research》2017,34(5):957-970
Purpose
To investigate the effect of compression on the crystallization behavior in amorphous tablets using sum frequency generation (SFG) microscopy imaging and more established analytical methods.Method
Tablets containing neat amorphous griseofulvin with/without excipients (silica, hydroxypropyl methylcellulose acetate succinate (HPMCAS), microcrystalline cellulose (MCC) and polyethylene glycol (PEG)) were prepared. They were analyzed upon preparation and storage using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, scanning electron microscopy (SEM) and SFG microscopy.Results
Compression-induced crystallization occurred predominantly on the surface of the neat amorphous griseofulvin tablets, with minimal crystallinity being detected in the core of the tablets. The presence of various types of excipients was not able to mitigate the compression-induced surface crystallization of the amorphous griseofulvin tablets. However, the excipients affected the crystallization rate of amorphous griseofulvin in the core of the tablet upon compression and storage.Conclusions
SFG microscopy can be used in combination with ATR-FTIR spectroscopy and SEM to understand the crystallization behaviour of amorphous tablets upon compression and storage. When selecting excipients for amorphous formulations, it is important to consider the effect of the excipients on the physical stability of the amorphous formulations.17.
Purpose
To understand the mechanism of nano-crystalline drug formation in Pluronic® (i.e., poly(ethylene oxide-block-propylene oxide) triblock copolymers) based drug-polymer solid dispersions.Materials and Methods
Four polymers, Pluronic® F127, F108, F68 and PEG 8000, which have different poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) ratio and chain length, were co-spray dried with BMS-347070, a COX-2 inhibitor, to form 50/50 (w/w) drug-polymer solid dispersions. The solid dispersions were analyzed by powder X-ray diffraction (PXRD), modulated differential scanning calorimetry (mDSC), and hot-stage microscopy. Average size of drug crystallites in different polymers was calculated by the Scherrer equation based on peak-broadening effect in PXRD. Two other drug compounds, BMS-A and BMS-B, were also spray dried with Pluronic® F127, and the solid dispersions were analyzed by PXRD and mDSC.Results
The average size of BMS-347070 crystallites in PEG 8000, F127, F108 and F68 polymers was 69, 80, 98 and 136 nm, respectively, and the degree of BMS-347070 crystallinity is the lowest in PEG 8000. Hot-stage microscopy showed that 50/50 drug-polymer dispersions crystallized in a two-step process: a portion of the polymer crystallizes first (Step 1), followed by crystallization of drug and remaining polymer (Step 2). The T g value of the BMS-347070/Pluronic® dispersions after Step 1 (i.e., T g1) was measured and/or calculated to be 15–26°C, and that of BMS-347070/PEG 8000 was 60°C. Solid dispersions of BMS-A and BMS-B in Pluronic® F127 have T g1 of 72 and 3°C, respectively; and PXRD showed BMS-A remained amorphous after ～3 weeks under ambient condition, while BMS-B crystallized in F127 with an average crystallite size of 143 nm.Conclusions
The size of drug crystallites in the drug-polymer solid dispersions is independent of polymer topology, but is caused kinetically by a combined effect of nucleation rate and crystal growth rate. When drug-Pluronic® solid dispersions crystallize at room temperature, that is close to the T g1 of the systems, a fast nucleation rate and a relatively slow crystal growth rate of the drug synergistically produced small crystallite size. While the much higher T g1 value of drug-PEG 8000 led to a slower nucleation rate and an even slower crystal growth rate at room temperature, therefore, small crystallite size and low drug crystallinity were observed. Results from BMS-A/Pluronic® and BMS-B/Pluronic® systems confirmed this kinetic theory.18.
Eiichi Yamamoto Kenji Hyodo Takuya Suzuki Hiroshi Ishihara Hiroshi Kikuchi Masaru Kato 《Pharmaceutical research》2018,35(5):103
Purpose
To simulate the stimuli-responsive and stoichiometrically controlled doxorubicin (DOX) release from liposomes in in vivo tumor interstitial fluid (TIF), the effect of ammonia concentration and pH on the DOX release from liposomes in human plasma at 37°C was quantitatively evaluated in vitro and the release rate was calculated as a function of ammonia concentration and pH.Methods
Human plasma samples spiked with DOX-loaded PEGylated liposomes (PLD) or Doxil®, containing ammonia (0.3–50 mM) at different pH values, were incubated at 37°C for 24 h. After incubation, the concentration of encapsulated DOX in the samples was determined by validated solid-phase extraction (SPE)-SPE-high performance liquid chromatography.Results
Accelerated DOX release (%) from liposomes was observed as the increase of ammonia concentration and pH of the matrix, and the decrease of encapsulated DOX concentration. The release rate was expressed as a function of the ammonia concentration and pH by using Henderson-Hasselbalch equation.Conclusions
The DOX release from PLD in TIF was expressed as a function ammonia concentration and pH at various DOX concentrations. Further, it was found that the DOX release from liposomes in a simulated TIF was more than 15 times higher than in normal plasma.19.
Kateřina Punčochová Andrew V. Ewing Michaela Gajdošová Tomáš Pekárek Josef Beránek Sergei G. Kazarian František Štěpánek 《Pharmaceutical research》2017,34(5):990-1001
Purpose
Imaging methods were used as tools to provide an understanding of phenomena that occur during dissolution experiments, and ultimately to select the best ratio of two polymers in a matrix in terms of enhancement of the dissolution rate and prevention of crystallization during dissolution.Methods
Magnetic resonance imaging, ATR-FTIR spectroscopic imaging and Raman mapping have been used to study the release mechanism of a poorly water soluble drug, aprepitant, from multicomponent amorphous solid dispersions. Solid dispersions were prepared based on the combination of two selected polymers - Soluplus, as a solubilizer, and PVP, as a dissolution enhancer. Formulations were prepared in a ratio of Soluplus:PVP 1:10, 1:5, 1:3, and 1:1, in order to obtain favorable properties of the polymer carrier.Results
The crystallization of aprepitant during dissolution has occurred to a varying degree in the polymer ratios 1:10, 1:5, and 1:3, but the increasing presence of Soluplus in the formulation delayed the onset of crystallization. The Soluplus:PVP 1:1 solid dispersion proved to be the best matrix studied, combining the abilities of both polymers in a synergistic manner.Conclusions
Aprepitant dissolution rate has been significantly enhanced. This study highlights the benefits of combining imaging methods in order to understand the release process.20.