Chitosan/polyester-based scaffolds for cartilage tissue engineering: Assessment of extracellular matrix formation

Naturally derived polymers have been extensively used in scaffold production for cartilage tissue engineering. The present work aims to evaluate and characterize extracellular matrix (ECM) formation in two types of chitosan-based scaffolds, using bovine articular chondrocytes (BACs). The influence of these scaffolds’ porosity, as well as pore size and geometry, on the formation of cartilagineous tissue was studied. The effect of stirred conditions on ECM formation was also assessed. Chitosan-poly(butylene succinate) (CPBS) scaffolds were produced by compression moulding and salt leaching, using a blend of 50% of each material. Different porosities and pore size structures were obtained. BACs were seeded onto CPBS scaffolds using spinner flasks. Constructs were then transferred to the incubator, where half were cultured under stirred conditions, and the other half under static conditions for 4 weeks. Constructs were characterized by scanning electron microscopy, histology procedures, immunolocalization of collagen type I and collagen type II, and dimethylmethylene blue assay for glycosaminoglycan (GAG) quantification. Both materials showed good affinity for cell attachment. Cells colonized the entire scaffolds and were able to produce ECM. Large pores with random geometry improved proteoglycans and collagen type II production. However, that structure has the opposite effect on GAG production. Stirred culture conditions indicate enhancement of GAG production in both types of scaffold.     

The role of lipase and alpha-amylase in the degradation of starch/poly(epsilon-caprolactone) fiber meshes and the osteogenic differentiation of cultured marrow stromal cells

The present work studies the influence of hydrolytic enzymes (alpha-amylase or lipase) on the degradation of fiber mesh scaffolds based on a blend of starch and poly(epsilon-caprolactone) (SPCL) and the osteogenic differentiation of osteogenic medium-expanded rat bone marrow stromal cells (MSCs) and subsequent formation of extracellular matrix on these scaffolds under static culture conditions. The biodegradation profile of SPCL fiber meshes was investigated using enzymes that are specifically responsible for the enzymatic hydrolysis of SPCL using concentrations similar to those found in human serum. These degradation studies were performed under static and dynamic conditions. After several degradation periods (3, 7, 14, 21, and 30 days), weight loss measurements and micro-computed tomography analysis (specifically porosity, interconnectivity, mean pore size, and fiber thickness) were performed. The SPCL scaffolds were seeded with rat MSCs and cultured for 8 and 16 days using complete osteogenic media with and without enzymes (alpha-amylase or lipase). Results indicate that culture medium supplemented with enzymes enhanced cell proliferation after 16 days of culture, whereas culture medium without enzymes did not. No calcium was detected in groups cultured with alpha-amylase or without enzymes after each time period, although groups cultured with lipase presented calcium deposition after the eighth day, showing a significant increase at the sixteenth day. Lipase appears to positively influence osteoblastic differentiation of rat MSCs and to enhance matrix mineralization. Furthermore, scanning electron microscopy images showed that the enzymes did not have a deleterious effect on the three-dimensional structure of SPCL fiber meshes, meaning that the scaffolds did not lose their structural integrity after 16 days. Confocal micrographs have shown cells to be evenly distributed and infiltrated within the SPCL fiber meshes up to 410 microm from the surface. This study demonstrates that supplementation of culture media with lipase holds great potential for the generation of bone tissue engineering constructs from MSCs seeded onto SPCL fiber meshes, because lipase enhances the osteoblastic differentiation of the seeded MSCs and promotes matrix mineralization without harming the structural integrity of the meshes over 16 days of culture.     

The influence of electrospun aligned poly(epsilon-caprolactone)/collagen nanofiber meshes on the formation of self-aligned skeletal muscle myotubes

Current treatment options for restoring large skeletal muscle tissue defects due to trauma or tumor ablation are limited by the host muscle tissue availability and donor site morbidity of muscle flap implantation. Creation of implantable functional muscle tissue that could restore muscle defects may bea possible solution. To engineer functional muscle tissue for reconstruction, scaffolds that mimic native fibers need to be developed. In this study we examined the feasibility of using poly(epsilon-caprolactone) (PCL)/collagen based nanofibers using electrospinning as a scaffold system for implantable engineered muscle. We investigated whether electrospun nanofibers could guide morphogenesis of skeletal muscle cells and enhance cellular organization. Nanofibers with different fiber orientations were fabricated by electrospinning with a blend of PCL and collagen. Human skeletal muscle cells (hSkMCs) were seeded onto the electrospun PCL/collagen nanofiber meshes and analyzed for cell adhesion, proliferation and organization. Our results show that unidirectionally oriented nanofibers significantly induced muscle cell alignment and myotube formation as compared to randomly oriented nanofibers. The aligned composite nanofiber scaffolds seeded with skeletal muscle cells may provide implantable functional muscle tissues for patients with large muscle defects.     

Umbilical-cord-blood-derived mesenchymal stem cells seeded onto fibronectin-immobilized polycaprolactone nanofiber improve cardiac function

Stem cells seeded onto biofunctional materials have greater potency for therapeutic applications. We investigated whether umbilical-cord-blood-derived mesenchymal stem cell (UCB-MSC)-seeded fibronectin (FN)-immobilized polycaprolactone (PCL) nanofibers could improve cardiac function and inhibit left ventricle (LV) remodeling in a rat model of myocardial infarction (MI). Aligned nanofibers were uniformly coated with poly(glycidyl methacrylate) by initiated chemical vapor deposition followed by covalent immobilization of FN proteins. The degree of cell elongation and adhesion efficacy were improved by FN immobilization. Furthermore, genes related to angiogenesis and mesenchymal differentiations were up-regulated in the FN-immobilized PCL nanofibers in comparison to control PCL nanofibers in vitro. 4 weeks after the transplantation in the rat MI model, the echocardiogram showed that the UCB-MSC-seeded FN-immobilized PCL nanofiber group increased LV ejection fraction and fraction shortening as compared to the non-treated control and acellular FN-immobilized PCL nanofiber groups. Histological analysis indicated that the implantation of UCB-MSCs with FN-immobilized PCL nanofibers induced a decrease in MI size and fibrosis, and an increase in scar thickness. This study indicates that FN-immobilized biofunctional PCL nanofibers could be an effective carrier for UCB-MSC transplantation for the treatment of MI.     

Surface controlled biomimetic coating of polycaprolactone nanofiber meshes to be used as bone extracellular matrix analogues

The aim of this work was to develop novel electrospun nanofiber meshes coated with a biomimetic calcium phosphate (BCP) layer that mimics the extracellular microenvironment found in the human bone structure. Poly (epsilon-caprolactone) (PCL) was selected because of its well-known medical applications, its biodegradability, biocompatibility and its susceptibility to partial hydrolysis by a straightforward alkaline treatment. The deposition of a calcium phosphate layer, similar to the inorganic phase of bone, on PCL nanofiber meshes was achieved by means of a surface modification. This initial surface modification was followed by treatment with solutions containing calcium and phosphate ions. The process was finished by a posterior immersion in a simulated body fluid (SBF) with nearly 1.5 x the inorganic concentration of the human blood plasma ions. After some optimization work, the best conditions were chosen to perform the biological assays. The influence of the bone-like BCP layer on the viability and adhesion, as well as on the proliferation of human osteoblast-like cells, was assessed. It was shown that PCL nanofiber meshes coated with a BCP layer support and enhance the proliferation of osteoblasts for long culture periods. The attractive properties of the coated structures produced in the present work demonstrated that those materials have potential to be used for applications in bone tissue engineering. This is the first time that nanofiber meshes could be coated with a biomimetic bone-like calcium phosphate layer produced in a way that the original mesh architecture can be fully maintained.     

Direct and indirect co-culture of chondrocytes and mesenchymal stem cells for the generation of polymer/extracellular matrix hybrid constructs

In this work, the influence of direct cell–cell contact in co-cultures of mesenchymal stem cells (MSCs) and chondrocytes for the improved deposition of cartilage-like extracellular matrix (ECM) within nonwoven fibrous poly(∊-caprolactone) (PCL) scaffolds was examined. To this end, chondrocytes and MSCs were either co-cultured in direct contact by mixing on a single PCL scaffold or produced via indirect co-culture, whereby the two cell types were seeded on separate scaffolds which were then cultured together in the same system either statically or under media perfusion in a bioreactor. In static cultures, the chondrocyte scaffold of an indirectly co-cultured group generated significantly greater amounts of glycosaminoglycan and collagen than the direct co-culture group initially seeded with the same number of chondrocytes. Furthermore, improved ECM production was linked to greater cellular proliferation and distribution throughout the scaffold in static culture. In perfusion cultures, flow had a significant effect on the proliferation of the chondrocytes. The ECM contents within the chondrocyte-containing scaffolds of the indirect co-culture groups either approximated or surpassed the amounts generated within the direct co-culture group. Additionally, within bioreactor culture there were indications that chondrocytes had an influence on the chondrogenesis of MSCs as evidenced by increases in cartilaginous ECM synthetic capacity. This work demonstrates that it is possible to generate PCL/ECM hybrid scaffolds for cartilage regeneration by utilizing the factors secreted by two different cell types, chondrocytes and MSCs, even in the absence of juxtacrine signaling.     

Articular chondrocytes and mesenchymal stem cells seeded on biodegradable scaffolds for the repair of cartilage in a rat osteochondral defect model

This work investigated the ability of co-cultures of articular chondrocytes and mesenchymal stem cells (MSCs) to repair articular cartilage in osteochondral defects. Bovine articular chondrocytes and rat MSCs were seeded in isolation or in co-culture onto electrospun poly(?-caprolactone) (PCL) scaffolds and implanted into an osteochondral defect in the trochlear groove of 12-week old Lewis rats. Additionally, a blank PCL scaffold and untreated defect were investigated. After 12 weeks, the extent of cartilage repair was analyzed through histological analysis, and the extent of bone healing was assessed by quantifying the total volume of mineralized bone in the defect through microcomputed tomography. Histological analysis revealed that the articular chondrocytes and co-cultures led to repair tissue that consisted of more hyaline-like cartilage tissue that was thicker and possessed more intense Safranin O staining. The MSC, blank PCL scaffold, and empty treatment groups generally led to the formation of fibrocartilage repair tissue. Microcomputed tomography revealed that while there was an equivalent amount of mineralized bone formation in the MSC, blank PCL, and empty treatment groups, the defects treated with chondrocytes or co-cultures had negligible mineralized bone formation. Overall, even with a reduced number of chondrocytes, co-cultures led to an equal level of cartilage repair compared to the chondrocyte samples, thus demonstrating the potential for the use of co-cultures of articular chondrocytes and MSCs for the in vivo repair of cartilage defects.     

The effect of irradiation modification and RGD sequence adsorption on the response of human osteoblasts to polycaprolactone

Using techniques of tissue engineering, synthetic substitutes can be applied for the repair and regeneration of damaged bone. It has been found that material surface properties are crucial for cell adhesion and spreading, i.e. cell activities that are related directly to the ability of osteoblasts to proliferate. This fact has promoted the strategy of creating an ECM-like layer onto materials, so as to influence the cell response. In this study human bone-derived osteoblasts have been used to test the effects of surface modification by low energy ion beams of a poly epsilon-caprolactone (PCL) substrate and subsequent RGD adsorption. Osteoblasts were seeded and grown onto untreated and irradiated poly epsilon-caprolactone films, with or without RGD-adsorption step, and viability, morphology, and spreading of the osteoblasts were studied at different time endpoints. Differences were observed in the organization of cytoskeleton within cells: stress fibers were more evident in irradiated samples vs. untreated and total cell adhesion was higher. Surface characterization by X-ray Photoelectron Spectroscopy, Atomic Force Microscopy, and surface free energy measurements showed that the polar character of PCL, i.e., the acid-base term, was increased following irradiation treatment. Moreover the irradiated PCL had a nano-sized topography, which also could improve osteoblasts adhesion. We found that the treatment of the surface with ion beam is per se improving osteoblasts adhesion and spreading onto PCL. Furthermore, also if a significant RGD adsorption was obtained for irradiated PCL surfaces, it was found that in the investigated conditions it seems to have only a minor effect on the cell response. This study suggests that new strategies involving irradiation-based treatments can be adopted to promote the initial steps of bone deposition onto synthetic surfaces, exploiting the surface-induced reorganization of the ECM matrix.     

Differential effects of growth factors on tissue-engineered cartilage

The effects of four regulatory factors on tissue-engineered cartilage were examined with specific focus on the ability to increase construct growth rate and concentrations of glycosaminoglycans (GAG) and collagen, the major extracellular matrix (ECM) components. Bovine calf articular chondrocytes were seeded onto biodegradable polyglycolic acid (PGA) scaffolds and cultured in medium with or without supplemental insulin-like growth factor (IGF-I), interleukin-4 (IL-4), transforming growth factor-beta1 (TGF-beta1) or platelet-derived growth factor (PDGF). IGF-I, IL-4, and TGF-beta1 increased construct wet weights by 1.5-2.9-fold over 4 weeks of culture and increased amounts of cartilaginous ECM components. IGF-I (10-300 ng/mL) maintained wet weight fractions of GAG in constructs seeded at high cell density and increased by up to fivefold GAG fractions in constructs seeded at lower cell density. TGF-beta1 (30 ng/mL) increased wet weight fractions of total collagen by up to 1.4-fold while maintaining a high fraction of type II collagen (79 plus minus 11% of the total collagen). IL-4 (1-100 ng/mL) minimized the thickness of the GAG-depleted region at the construct surfaces. PDGF (1-100 ng/mL) decreased construct growth rate and ECM fractions. Different regulatory factors thus elicit significantly different chondrogenic responses and can be used to selectively control the growth rate and improve the composition of engineered cartilage.     

Bioactive starch-based scaffolds and human adipose stem cells are a good combination for bone tissue engineering

Silicon is known to have an influence on calcium phosphate deposition and on the differentiation of bone precursor cells. This study explores the effect of the incorporation of silanol (Si-OH) groups into polymeric scaffolds on the osteogenic differentiation of human adipose stem cells (hASC) cultured under dynamic and static conditions. A blend of corn starch with polycaprolactone (30/70wt.%, SPCL) was used to produce three-dimensional fibre meshes scaffolds by the wet-spinning technique, and a calcium silicate solution was used as a non-solvent to develop an in situ functionalization with Si-OH groups. In vitro assessment, using hASC, of functionalized and non-functionalized scaffolds was evaluated in either α-MEM or osteogenic medium under static and dynamic conditions (provided by a flow perfusion bioreactor). The functionalized materials, SPCL-Si, exhibit the capacity to sustain cell proliferation and induce their differentiation into the osteogenic lineage. The formation of mineralization nodules was observed in cells cultured on the SPCL-Si materials. Culturing under dynamic conditions using a flow perfusion bioreactor was shown to enhance the hASC proliferation and differentiation and a better distribution of cells within the material. The present work demonstrates the potential of these functionalized materials for future applications in bone tissue engineering. Additionally, these results highlight the simplicity, economic and reliable production process of those materials.     

Polymer scaffolds fabricated with pore-size gradients as a model for studying the zonal organization within tissue-engineered cartilage constructs

The zonal organization of cells and extracellular matrix (ECM) constituents within articular cartilage is important for its biomechanical function in diarthroidal joints. Tissue-engineering strategies adopting porous three-dimensional (3D) scaffolds offer significant promise for the repair of articular cartilage defects, yet few approaches have accounted for the zonal structural organization as in native articular cartilage. In this study, the ability of anisotropic pore architectures to influence the zonal organization of chondrocytes and ECM components was investigated. Using a novel 3D fiber deposition (3DF) technique, we designed and produced 100% interconnecting scaffolds containing either homogeneously spaced pores (fiber spacing, 1 mm; pore size, about 680 microm in diameter) or pore-size gradients (fiber spacing, 0.5-2.0 mm; pore size range, about 200-1650 microm in diameter), but with similar overall porosity (about 80%) and volume fraction available for cell attachment and ECM formation. In vitro cell seeding showed that pore-size gradients promoted anisotropic cell distribution like that in the superficial, middle, and lower zones of immature bovine articular cartilage, irrespective of dynamic or static seeding methods. There was a direct correlation between zonal scaffold volume fraction and both DNA and glycosaminoglycan (GAG) content. Prolonged tissue culture in vitro showed similar inhomogeneous distributions of zonal GAG and collagen type II accumulation but not of GAG:DNA content, and levels were an order of magnitude less than in native cartilage. In this model system, we illustrated how scaffold design and novel processing techniques can be used to develop anisotropic pore architectures for instructing zonal cell and tissue distribution in tissue-engineered cartilage constructs.     

Human amniotic membrane as a chondrocyte carrier vehicle/substrate: in vitro study

Human amniotic membrane (HAM) is an established biomaterial used in many clinical applications. However, its use for tissue engineering purposes has not been fully realized. A study was therefore conducted to evaluate the feasibility of using HAM as a chondrocyte substrate/carrier. HAMs were obtained from fresh human placenta and were process to produced air dried HAM (AdHAM) and freeze dried HAM (FdHAM). Rabbit chondrocytes were isolated and expanded in vitro and seeded onto these preparations. Cell proliferation, GAG expression and GAG/cell expression were measured at days 3, 6, 9, 12, 15, 21, and 28. These were compared to chondrocytes seeded onto plastic surfaces. Histological analysis and scanning electron microscopy was performed to observe cell attachment. There was significantly higher cell proliferation rates observed between AdHAM (13-51%, P=0.001) or FdHAM (18-48%, p = 0.001) to chondrocytes in monolayer. Similarly, GAG and GAG/cell expressed in AdHAM (33-82%, p = 0.001; 22-60%, p = 0.001) or FdHAM (41-81%, p = 0.001: 28-60%, p = 0.001) were significantly higher than monolayer cultures. However, no significant differences were observed in the proliferation rates (p = 0.576), GAG expression (p = 0.476) and GAG/cell expression (p = 0.135) between AdHAM and FdHAM. The histology and scanning electron microscopy assessments demonstrates good chondrocyte attachments on both HAMs. In conclusion, both AdHAM and FdHAM provide superior chondrocyte proliferation, GAG expression, and attachment than monolayer cultures making it a potential substrate/carrier for cell based cartilage therapy and transplantation.     

Spatial arrangement of polycaprolactone/collagen nanofiber scaffolds regulates the wound healing related behaviors of human adipose stromal cells

A sufficient cell source and minimal invasiveness in obtaining human adipose stromal cells (hASCs) hold great promise for their utilization in wound repair. However, little is known about how cell-residing microenvironments regulate the cellular response. In this study we explored the effects of polycaprolactone (PCL)/collagen nanofibers with distinct spatial arrangements (aligned and random) on phenotypic expression of hASCs in vitro. Elongated cell morphology, higher proliferation, and faster migration rate were observed for hASCs cultured on the aligned nanofibers, showing that hASCs could detect the nanofiber spatial arrangement and then distinctively respond. This study on the expression of extracellular matrix (ECM) related genes in hASCs revealed higher synthesis capacity for critical ECM molecules including tropoelastin, collagen I, and matrix metalloproteinase (MMP)-1 on the aligned nanofibers. Integrins α(5), β(1), β(3), β(6,) and transforming growth factor (TGF)-β(1) were differentially regulated by PCL/collagen nanofiber arrangements. Our results indicate that fiber orientation-induced phenotypic change of hASCs may be regulated by integrins and TGF-β signaling synergistically. These findings demonstrate the potential application of hASCs and aligned PCL/collagen nanofibers for accelerated wound repair.     

Novel Melt-Processable Chitosan–Polybutylene Succinate Fibre Scaffolds for Cartilage Tissue Engineering

Novel chitosan/polybutylene succinate fibre-based scaffolds (C-PBS) were seeded with bovine articular chondrocytes in order to assess their suitability for cartilage tissue engineering. Chondrocytes were seeded onto C-PBS scaffolds using spinner flasks under dynamic conditions, and cultured under orbital rotation for a total of 6 weeks. Non-woven polyglycolic acid (PGA) felts were used as reference materials. Tissue-engineered constructs were characterized by scanning electron microscopy (SEM), hematoxylin–eosin (H&E), toluidine blue and alcian blue staining, immunolocalization of collagen types I and II, and dimethylmethylene blue (DMB) assay for glycosaminoglycans (GAG) quantification at different time points. SEM showed the chondrocytes' typical morphology, with colonization at the surface and within the pores of the C-PBS scaffolds. These observations were supported by routine histology. Toluidine blue and alcian blue stains, as well as immunohistochemistry for collagen types I and II, provided qualitative information on the composition of the engineered extracellular matrix. More pronounced staining was observed for collagen type II than collagen type I. Similar results were observed with constructs engineered on PGA scaffolds. These also exhibited higher amounts of matrix glycosaminoglycans and presented a central region which contained fewer cells and little matrix, a feature that was not detected with C-PBS constructs.     

Three-dimensional polycaprolactone scaffold-conjugated bone morphogenetic protein-2 promotes cartilage regeneration from primary chondrocytes in vitro and in vivo without accelerated endochondral ossification

As articular cartilage is avascular, and mature chondrocytes do not proliferate, cartilage lesions have a limited capacity for regeneration after severe damage. The treatment of such damage has been challenging due to the limited availability of autologous healthy cartilage and lengthy and expensive cell isolation and expansion procedures. Hence, the use of bone morphogenetic protein-2 (BMP-2), a potent regulator of chondrogenic expression, has received considerable attention in cartilage and osteochondral tissue engineering. However, the exact role of BMP-2 in cartilage repair has been postulated to promote both cartilage formation and subsequent cartilage degradation through hypertrophy and endochondral ossification. Furthermore, it is likely that the manner in which BMP-2 is presented to chondrocytes will influence the physiologic pathway (repair vs. degeneration). This study investigates the relative influence of BMP-2 on cartilage matrix and potential subsequent bone matrix production using primary chondrocytes seeded on designed 3D polycaprolactone (PCL) scaffolds with chemically conjugated BMP-2. The results show that chemically conjugated BMP-2 PCL scaffolds can promote significantly greater cartilage regeneration from seeded chondrocytes both in vitro and in vivo compared with untreated scaffolds. Furthermore, our results demonstrate that the conjugated BMP-2 does not particularly accelerate endochondral ossification even in a readily permissible and highly vascular in vivo environment compared with untreated PCL scaffolds. This study not only reveals the potential use of the BMP-2 conjugation delivery method for enhanced cartilage tissue formation but also gives new insights for the effects of conjugated BMP-2 on cartilage regeneration and osteochondral ossification.     

Anatomical 3D fiber-deposited scaffolds for tissue engineering: designing a neotrachea

The advantage of using anatomically shaped scaffolds as compared to modeled designs was investigated and assessed in terms of cartilage formation in an artificial tracheal construct. Scaffolds were rapid prototyped with a technique named three-dimensional fiber deposition (3DF). Anatomical scaffolds were fabricated from a patient-derived computerized tomography dataset, and compared to cylindrical and toroidal tubular scaffolds. Lewis rat tracheal chondrocytes were seeded on 3DF scaffolds and cultured for 21 days. The 3-(4,5-dimethylthiazol-2yl)-2,5-dyphenyltetrazolium bromide (MTT) and sulfated glycosaminoglycan (GAG) assays were performed to measure the relative number of cells and the extracellular matrix (ECM) formed. After 3 weeks of culture, the anatomical scaffolds revealed a significant increase in ECM synthesis and a higher degree of differentiation as shown by the GAG/MTT ratio and by scanning electron microscopy analysis. Interestingly, a lower scaffold's pore volume and porosity resulted in more tissue formation and a better cell differentiation, as evidenced by GAG and GAG/MTT values. Scaffolds were compliant and did not show any signs of luminal obstruction in vitro. These results may promote anatomical scaffolds as functional matrices for tissue regeneration not only to help regain the original shape, but also for their improved capacity to support larger tissue formation.     

The effect of differentiation stage of amniotic fluid stem cells on bone regeneration

Bone tissue engineering strategies require cells with high proliferative and osteogenic potential as well as a suitable scaffold to support the development of these as they form new bone tissue. In this study, we evaluated whether the differentiation stage of amniotic fluid stem cells (AFSC) could enhance the regeneration of critical sized femoral defects in a rat model. For this purpose, AFSC were seeded onto a starch-poly(ε-caprolactone) (SPCL) scaffold and were cultured in vitro in osteogenic culture media for different periods of time in order to obtain: i) undifferentiated cells, ii) cells committed to the osteogenic phenotype and iii) "osteoblast-like" cells. In vitro results indicate that AFSC were considered to be osteogenically committed by the end of week 2 and osteoblastic-like after week 3 in culture. Constructs composed of AFSC-SPCL scaffolds from each differentiation stage were implanted into critical sized femoral defects. The quality of new tissue formed in the defects was evaluated based on micro-CT imaging and histological analysis of constructs retrieved at 4 and 16 weeks after implantation. In vivo formation of new bone was observed under all conditions. However, the most complete repair of the defect was observed after 16 weeks in the animals receiving the SPCL scaffolds seeded with osteogenically committed AFSC. Furthermore, the presence of blood vessels was noted in the inner sections of the scaffolds suggests that these cells could potentially be used to induce bone regeneration and angiogenesis in non-union bone defects.     

A new biodegradable polyester elastomer for cartilage tissue engineering

The objective of this study is to assess whether a new biodegradable elastomer, poly(1,8-octanediol citrate) (POC), would be a suitable material to engineer elastomeric scaffolds for cartilage tissue engineering. Porous POC scaffolds were prepared via the salt-leaching method and initially assessed for their ability to rapidly recover from compressive deformation (% recovery ratio). Controls consisted of scaffolds made from other materials commonly used in cartilage tissue engineering, including 2% agarose, 4% alginate, non woven poly(glycolic acid) (PGA) meshes, and non woven poly(L-lactide-co-glycolide) (PLGA) meshes. Articular chondrocytes from bovine knee were isolated and seeded onto porous disk-shaped POC scaffolds, which were subsequently cultured in vitro for up to 28 days. POC scaffolds completely recover from compressive deformation, and the stress-strain curve is typical of an elastomer (recovery ratio>98%). Agarose gel (2%) scaffolds broke during the compression test. The recovery ratio of 4% alginate gel scaffolds, PLLA, and PGA were 72, 85, and 88%, respectively. The Young's modulus of POC-chondrocyte constructs and cell-free POC scaffolds cultured for 28 days were 12.02+/-2.26 kPa and 3.27+/-0.72 kPa, respectively. After 28 days of culture, the recovery ratio of POC-chondrocyte constructs and cell-free POC scaffolds were 93% and 99%, respectively. The glycosaminoglycan (GAG) and collagen content at day 28 was 36% and 26% of that found in bovine knee cartilage explants. Histology/immunohistochemistry evaluations confirm that chondrocytes were able to attach to the pore walls within the scaffold, maintain cell phenotype, and form a cartilaginous tissue during the 28 days of culture.     

Cartilaginous ECM component-modification of the micro-bead culture system for chondrogenic differentiation of mesenchymal stem cells

In this study a 3-D alginate microbead platform was coated with cartilaginous extracellular matrix (ECM) components to emulate chondrogenic microenvironment in vivo for the differentiation of bone marrow-derived mesenchymal stem cells (BMSCs). BMSCs were seeded onto the microbead surface and the effect of the modified microbead on BMSC adhesion, proliferation and chondrogenic differentiation was studied, and compared to chondrogenesis in conventional pellet culture. Our results indicated that microbead system promoted BMSC proliferation and protein deposition resulting in the formation of bigger aggregates compared to conventional pellet culture. Analysis of the aggregates indicated that chondroitin sulfate (CS)- and Col2-coated microbeads enhanced the chondrogenic differentiation of hBMSCs, with increasing formation of glycosaminoglycan (GAG) and collagen II deposition in histology, immunohistochemistry and real time PCR analysis. In addition, Col2-coated microbeads resulted in hypertrophic maturation of the differentiated chondrocytes, similar to conventional pellet culture, while CS-coated microbeads were able to retain the pre-hypertrophy state of the differentiated cells. Our result suggested that provision of suitable cartilaginous microenvironment in a 3-D system can promote the chondrogenic differentiation of BMSC and influence the phenotype of resulting chondrocytes. Our microbead system provides an easy method of processing a 3-D alginate system that allows the possibility of scaling up chondrogenic pellet production for clinical application, while the modifiable microbeads also provide an adjustable 3-D platform for the study of co-interaction of ECM and differentiation factors during the stem cell differentiation.