The influence of dentin adhesives on the demineralization of irradiated and non-irradiated human root dentin

This study determined the caries-protective effects of two different dentin bonding systems (Syntac, Scotchbond) on sound and irradiated root surfaces in vitro. The root surfaces of 30 freshly extracted caries-free human molars were used. The teeth were bisected in the mesio-distal direction and all lingual halves of the teeth were irradiated. The irradiation dose of 60 Gy was fractionally applied over six weeks (2 Gy/day, 5d/wk). All halves were then coated with acid-resistant nail varnish, exposing two rectangular windows 6 mm2 each on the dentinal root surface. One window served as an untreated control, while the other was treated with one of the above mentioned dentin adhesive systems. The specimens were randomly distributed among the four experimental groups as follow: Group A: Syntac, non-irradiated; Group AR: Syntac, irradiated; Group B: Scotchbond, non-irradiated; Group BR: Scotchbond, irradiated. Subsequently, all specimens were demineralized for 14 days with acidified gel (HEC, pH 4.8, 37 degrees C). From each window, two dentinal slabs were cut. The slabs were ground to a thickness of 80 microm and submerged in water. The depth of the lesions was determined using a polarized light microscope. The non-irradiated control specimens showed lesions with an average depth of 63 microm (+/-10,2 microm). In the case of the irradiated control specimen, the lesion depth was not significantly different. In all experimental groups, the lesion depth was significantly reduced compared to the control groups. Statistical analysis revealed no significant differences between the irradiated and non-irradiated specimens. It can be concluded that demineralization of the root surface can be hampered by application of the dentin adhesive systems tested. In this study, no differences between irradiated and sound root surfaces could be detected.     

APF and dentifrice effect on root dentin demineralization and biofilm

Because dentin is more caries-susceptible than enamel, its demineralization may be more influenced by additional fluoride (F). We hypothesized that a combination of professional F, applied as acidulated phosphate F (APF), and use of 1100-ppm-F dentifrice would provide additional protection for dentin compared with 1100-ppm-F alone. Twelve adult volunteers wore palatal appliances containing root dentin slabs, which were subjected, during 4 experimental phases of 7 days each, to biofilm accumulation and sucrose exposure 8x/day. The volunteers were randomly assigned to the following treatments: placebo dentifrice (PD), 1100-ppm-F dentifrice (FD), APF + PD, and APF+FD. APF gel (1.23% F) was applied to the slabs once at the beginning of the experimental phase, and the dentifrices were used 3x/day. APF and FD increased F concentration in biofilm fluid and reduced root dentin demineralization, presenting an additive effect. Analysis of the data suggests that the combination of APF gel application and daily regular use of 1100-ppm-F dentifrice may provide additional protection against root caries compared with the dentifrice alone.     

Influence of three different sealants on root dentin demineralization in situ

PURPOSE: To evaluate in situ the onset of initial demineralization in human dentin pretreated either with two different dentin bonding agents or a desensitizer. METHODS: 28 freshly extracted human molars were included in this study. The root surfaces were thoroughly cleaned, thereby removing the cementum. From each tooth four root dentin specimens were prepared. The specimens were distributed among the following experimental groups: C: control group (untreated), S: Syntac Classic, X: Xeno III, and H: Hyposen. For each subject, one dentin specimen of each group was inserted into both buccal aspects of a bilateral intraoral mandibular appliance. The appliances were worn by 14 subjects for 5 weeks day and night. One side was brushed daily with fluoride-containing toothpaste (Aronal) (B). On the other side, plaque was allowed to grow (NB). Individual oral hygiene techniques were performed without any fluorides. During meals, the appliance was stored in 10% sucrose solution. After the in situ period, slabs (150 microm) were ground and studied using polarized light microscopy. RESULTS: For lesion depth, ANOVA revealed significant differences between brushed and unbrushed specimens. In the brushed groups, the following lesion depths were evaluated (mean values and standard deviation in microns): Group B-C: 74.1 (+/- 18.5), Group B-S: 27.6 (+/- 9.6); Group B-X: 28.7 (+/- 9.6), and Group B-H: 34.3 (+/- 20.6). The non-brushed specimens showed following lesion depths: Group NB-C: 101.7 (+/- 23.9), Group NB-S: 59.9 (+/- 13.1), Group NB-X: 52.5 (+/- 12.1), and Group NB-H: 72.9 (+/- 19.9). Compared to the non-brushed groups, lesion depths in the brushed group were significantly decreased (P < 0.05, Tukey's test). The reduction of lesion depths after application of the three agents was significant in both cases (brushed and non-brushed groups). Within the limitations of an in situ study it can be concluded that the demineralization of the root surface can be inhibited by application of dentin adhesives and desensitizers under different oral hygiene conditions.     

Occlusion of dentin tubules by desensitizing agents

PURPOSE: To evaluate the occluding effect of five desensitizing agents on human dentin tubules. METHODS: 30 buccal and lingual surfaces were prepared from 15 extracted intact third molars. Each surface was polished with aluminum oxide abrasive papers to remove enamel and to expose the underlying dentin in cervical area. The flat dentin surfaces were treated with 0.5 M EDTA for 2 minutes to expose dentin tubule orifices. The samples were randomly divided into six groups: AS - immersed in artificial saliva at 37 degrees C for 2 weeks (control); OX - Oxagel (monopotassium oxalate), DU - Duraphat (sodium fluoride), DE - Desensibilize (strontium chloride), OD - Odahcam (acidulated phosphate fluoride) and SE - Sensodyne (strontium chloride + calcium carbonate abrasive). Dentin desensitizers were applied during 2 weeks and after each application the samples were kept in artificial saliva at 37 degrees C. The samples were prepared according to the scanning electron microscope procedures and were examined at x2000 magnification. RESULTS: The results were expressed in percent (%) of tubule occlusion and analyzed by ANOVA and Duncan's multiple range test (P < 0.05): AS- 45.41 +/- 11.65a; OX- 42.65 +/- 11.79a; DU- 47.25 +/- 8.59ab; DE- 49.36 +/- 18.27ab; OD- 64.43 +/- 15.55b and SE- 65.44 +/- 10.93b. Results suggest that the dentin surfaces treated with OD and SE showed higher tubule occlusion when compared to AS and OX, but were not different compared to DU and DE treatments.     

Effect of desensitizing agents on the hydraulic conductance of human dentin subjected to different surface pre-treatments--an in vitro study.

OBJECTIVES: The aim of this study was to evaluate the variation of fluid filtration across dentin treated with different formulations of potassium oxalate gels and one gel of acidified sodium fluorophosphate, under five different pre-conditioned dentin surfaces. METHODS: The methodology used for the measurement of hydraulic conductance of dentin in the present study was based on the model suggested by Pashley, Stewart and Galloway [Arch Oral Biol 29 (1984)379]. Two hundred dentin discs 1 mm in thickness, obtained from human extracted third molars, were divided into 20 groups of ten specimens each. The groups corresponded to the following experimental materials: 3% potassium oxalate gel-pH 4; 6% potassium oxalate gel-pH 4; 3% potassium oxalate gel-pH 2.5 and 1.23% fluoride gel (APF gel)-pH 3.6-3.9, applied to dentin under the following surface conditions: air-dried, blot-dried, wet, EDTA air-dried; EDTA blot-dried. General MANOVA and post-hoc Duncan tests were performed on the data. RESULTS: Regardless of surface pre-treatment the 3% potassium oxalate gel-pH 2.5 produced the greatest reduction in dentinal filtration (p<0.05) even after citric acid challenge. In general, air-drying the dentin was the best surface pre-treatment (p<0.05). The interaction between the material and surface pre-treatment showed values of hydraulic conductance similar for most of the combinations, but the 3% potassium oxalate gel-pH 2.5 under wet conditions produced the largest reduction in hydraulic conductance. The APF gel produced the smallest reduction in hydraulic conductance when compared with the other materials, regardless of surface pre-treatment. SIGNIFICANCE: the potassium oxalate gels studied in this investigation have a great potential for tubule occlusion and, consequently, should be effective treatments of dentinal hypersensitivity, regardless of dentin wetness.     

Replica of human dentin treated with different desensitizing agents: a methodological SEM study in vitro

This is a preliminary study to determine a methodological sequence in vitro which may allow the reproduction of dentin for SEM analysis, after the use of different desensitizing agents. Dentin discs obtained from extracted human third molars were etched with 6% citric acid, an artificial smear layer was created and the surface dentin discs were divided into four quadrants. Quadrants 2, 3 and 4 of each disc were conditioned with 6% citric acid. The desensitizing agents (Oxa-Gel, Gluma Desensitizer and an experimental agent) were applied to quadrants 3 and 4. To evaluate the acid resistance of the treatment, quadrant 4 was etched again with 6% citric acid. An impression was then taken with Aquasil ULV. After a setting period of 6 min, each disc was removed from the impression and stored in a moist-free environment for 24 h at 37 degrees C. After that time, a low-viscosity epoxy resin (Araltec GY 1109 BR) was poured into the impression and cured for 24 h. All specimens were metal-coated for SEM analysis. Comparison of the photomicrographs of dentin discs with their respective impressions and resin replicas showed that this technique can reproduce the characteristics of the dentin surface treated with desensitizing agents.     

Diffusion of strontium from desensitizing agents into human dentin as determined by energy-dispersive analysis.

Strontium-containing desensitizing agents were applied to one set of tooth surfaces and were burnished onto another set of diametric surfaces. Concentration of strontium at dentin depth was determined by X-radiation dispersive analysis. Burnishing produced deeper strontium penetration. Fick's Second Law provided an estimate of relative effective time for equal strontium distributions by the two methods.     

A scanning electronic microscopy study of the action of different desensitizing agents on bovine dentin

This study sought to use scanning electronic microscopy (SEM) to evaluate the dentinal tubule occlusion potential of different desensitizing agents. Ten slices of bovine dentin were divided into six fragments, cleaned (using ultrasound), and etched for 15 seconds with a 35% phosphoric acid solution. All but one of the groups received a different desensitizing agent; the sixth group served as a control and received no additional treatment. After the agents were applied, the dentin specimens were analyzed by SEM and scores were assigned based on the extent of tubular obliteration. Only three agents demonstrated tubular sealing that was significantly different from that of the control group.     

Occluding effect of Nd:YAG laser and different dentin desensitizing agents on human dentinal tubules in vitro: a scanning electron microscopy investigation

OBJECTIVES : This in vitro study aimed to microscopically evaluate and compare the occluding effect of the Nd:YAG laser and different dentin desensitizing agents on human dentinal tubules. MATERIALS AND METHODS : The Nd:YAG laser (SunLase? 800) and four commercially available and professionally applied dentin desensitizers (Gluma? desensitizer, Tenure Quick?, Quell? desensitizer, and VivaSens?) were investigated in this study. Sixty-four extracted intact human molars were used. Each dentin surface was divided by shallow indentation into two halves, one of which was used for treatment and the other of which served as a control. The dentin surfaces were etched to remove any smear plugs and to mimic the open dentinal tubules of sensitive dentin using 0.5 M ethylenediaminetetraacetic acid (pH 7.4) for two minutes (applied with a microbrush) and then rinsed with an air-water syringe for 30 seconds. The laser samples (n=16) were randomly divided into four groups of four samples each. These groups were the step-up technique group, the 14-day group, the one-minute group, and the two-minute group. Forty-eight samples were treated with the four tested desensitizing agents and were randomly divided into four groups (n=12/group). Each group was further subdivided into three subgroups (n=4). Samples of the first subgroup were treated for 14 days, while those of the second subgroup were treated once. Samples of the last subgroup were fractured longitudinally after a single treatment. All of the samples were then examined under a scanning electron microscope. RESULTS : The Nd:YAG laser-irradiated dentin showed reduction or complete obliteration of the dentinal tubule lumen; thus, the treatment modified the original dentinal structure. The lased dentin surface in the two-minute group showed bubble-like changes in the area of the dentinal tubules' orifices. Statistically, the two-minute group was found to have a significantly higher percentage of partially or fully occluded tubules than did the one-minute group. All of the studied desensitizing agents produced occlusion of the dentinal tubules; however, the appearance of the precipitates, the level of coverage, and the degree of dentinal occlusion varied among the tested products. CONCLUSION : Throughout the specified period of this study, occlusion and/or narrowing of the open dentinal tubules have been successfully achieved with both treatment approaches.     

Laser-fluoride effect on root demineralization

Although the individual cariostatic effects of laser and fluoride have been shown, the combined effect of CO(2) laser and fluoride on root demineralization remains uncertain and was the main aim of this study. By using a pH-cycling system and Polarized Light Microscopy, we demonstrated the synergistic effect of fluoride combined with CO(2) laser treatment on reducing root demineralization. The mean lesion depths (in microm) for each group were 160 +/- 14 (Control), 113 +/- 8 (Laser treatment alone), 111 +/- 6 (Fluoride treatment alone), and 25 +/- 7 (Fluoride followed by laser treatment). A significant laser-enhanced fluoride uptake, characterized by the ToF-SIMS analysis, was revealed by the 37% and 400% increments in loosely and firmly bound fluorides (both p < 0.002) in laser-irradiated areas, compared with the non-irradiated controls. In conclusion, there is a significant synergistic effect of combined CO(2) laser and fluoride treatment on the inhibition of root demineralization, possibly due to laser-enhanced fluoride uptake in the root.     

Randomized controlled clinical trial on the efficacy of dentin desensitizing agents

Objective. To investigate the effects of four dentin desensitizers on pain reduction in hypersensitive cervical dentin lesions. Materials and methods. The trial was designed as a randomized, controlled, four-arm, single-masked study. Fifty subjects with at least one hypersensitive lesion in each of the four quadrants were allocated. The requested pre-operative pain, determined as a response to 2-s air-blast (AB) and probe scratching (PS), was ≥5 on a VAS scale, 0 = no through to 10 = worst pain. Randomly each subject received each of the four treatments: MS Coat One F (MSC, Sun Medical, Japan), Nanoseal (NAN, Nishin, Japan), Teethmate Desensitizer (TMD, Kuraray Noritake, Japan) and Gluma Desensitizer PowerGel (GLU, HeraeusKulzer, Germany). The investigator assessed blindly the pain response using the two stimuli and recorded the patients’ VAS scores before and immediately after application, after 1 week and after 1, 3 and 6 months. Statistical data treatment. ANOVA and post-hoc testing (p ≤ 0.05). Results. Forty-nine subjects completed the trial. Pre-operative dentin hypersensitivity (DH) for the groups was not significantly different. All desensitizers reduced DH significantly throughout the 6-months observation. ANOVA revealed significant differences among VAS scores, obtained with the desensitizing agents (p < 0.001). Ranking by post-hoc testing was: MSC > NAN > TMD > GLU (p < 0.05). Upon PS NAN and TMD showed slight but significant regain of sensitivity after 6 months. For GLU PS scores immediately after application and after 6 months were not significantly different, whereas recalls after 1 week, 1 month and 3 months revealed significantly lower scores. Conclusion. The calcium phosphate-based TMD and GLU proved highly effective in reducing sensitivity.     

Chelating agents: their effect on the permeability of root canal dentin.

An in vitro assessment was made of the ability of three chelating agents used in endodontics to alter the dye penetration of dentinal tubules from the root canal surface. The experiment and control for this study were within the same root. It was found that all three agents significantly reduced the dye penetration into dentin, but there was no difference among the agents in the degree of reduction of dye penetration.     

Evaluation of the effects of different chelation agents on root dentin roughness

Successful root canal treatment requires effective irrigation of the entire root canal system. While chelating agents support irrigation, they can also alter physicochemical properties of the root dentin structure. The aim of this study is to evaluate the effect of different chelation agents on root dentin roughness. Twenty-five extracted maxillary incisors were used in this study. Samples were separated longitudinally and divided into five groups: distilled water, NaOCl, ethylenediaminetetraacetic acid (EDTA), phytic acid and citric acid (CA). Atomic force microscope and energy dispersive X-ray spectroscopy analyses were used for analysing. One-way analysis of variance and Turkey tests were used in the statistical analysis of the study. EDTA, CA and phytic acid solutions increased the roughness and phytic acid and CA solutions decreased the Ca/P ratio in dentin tissue. No statistical difference was observed in the other groups. The decrease of Ca/P ratio should be taken under consideration during irrigation. The increase in surface roughness may provide clinical benefit by supporting the adhesion of the root canal filling materials to the dentin surface.     

The effect of different light-curing methods on temperature changes of dual polymerizing agents cemented to human dentin

AIM: This in vitro study aims to measure the temperature changes of resin luting cements cemented to human dentin when using different light curing systems for photo-activation. METHODS AND MATERIALS: The three different types of light-curing units (LCUs) used for photoactivation were quartz-tungsten halogen (QTH), light emitting diode (LED), and plasma arc (PAC). Two types of dual cure resin cements were used [Variolink II (VL) and Choice (CH)]. Feltik Z250 composite resin material was used to prepare composite discs. Thirty human dentin specimens were prepared for each resin luting cement (ten for each light source). A total of 60 specimens were fabricated. Resin cement was applied on a dentin bridge and covered with the prepared composite disc where specimens were fabricated. Temperature change was recorded with a digital thermometer. RESULTS: The lowest temperature was recorded when VL and CH were photo-activated with the PAC unit. The PAC unit produced significantly lower recorded temperatures than the LED and QTH units. No significant difference appeared between QTH and LED units in terms of recorded temperature. CONCLUSION: The PAC unit produced significantly lower temperature changes compared to QTH and LED curing units. The risk for temperature rise should be taken into consideration during photo-polymerization of adhesive resins with LED or QTH in deep cavities when dentin thickness is 0.5 mm.