Enhanced release of solid dispersions of etodolac in polyethylene glycol

This work examines the release of etodolac from various molecular weight fractions of polyethylene glycol (PEG) solid dispersions. Solid dispersions of etodolac were prepared in different molar ratios of drug/carrier by using solvent and melting methods. The release rate of etodolac from the resulting complexes was determined from dissolution studies by use of USP dissolution apparatus 2 (paddle method). The physical state and drug:PEG interaction of solid dispersions and physical mixtures were characterized by X-ray diffraction (XRD), infrared spectroscopy (IR) and differential scanning calorimetry (DSC). The dissolution rate of etodolac is increased in all of the solid dispersion systems compared to that of the pure drug and physical mixtures. The solid dispersion compound prepared in the molar ratio of 1:5 by the solvent method was found to have the fastest dissolution profile. The physical properties did not change after 9 months storage in normal conditions.     

Comparison of HPMC based polymers performance as carriers for manufacture of solid dispersions using the melt extruder

Preparation of amorphous solid dispersions using hot-melt extrusion process for poorly water soluble compounds which degrade on melting remains a challenge due to exposure to high temperatures. The aim of this study was to develop a physically and chemically stable amorphous solid dispersion of a poorly water-soluble compound, NVS981, which is highly thermal sensitive and degrades upon melting at 165 °C. Hydroxypropyl Methyl Cellulose (HPMC) based polymers; HPMC 3cps, HPMC phthalate (HPMCP) and HPMC acetyl succinate (HPMCAS) were selected as carriers to prepare solid dispersions using hot melt extrusion because of their relatively low glass transition temperatures. The solid dispersions were compared for their ease of manufacturing, physical stability such as recrystallization potential, phase separation, molecular mobility and enhancement of drug dissolution. Two different drug loads of 20 and 50% (w/w) were studied in each polymer system. It was interesting to note that solid dispersions with 50% (w/w) drug load were easier to process in the melt extruder compared to 20% (w/w) drug load in all three carriers, which was attributed to the plasticizing behavior of the drug substance. Upon storage at accelerated stability conditions, no phase separation was observed in HPMC 3cps and HPMCAS solid dispersions at the lower and higher drug load, whereas for HPMCP, phase separation was observed at higher drug load after 3 months. The pharmaceutical performance of these solid dispersions was evaluated by studying drug dissolution in pH 6.8 phosphate buffer. Drug release from solid dispersion prepared from polymers used for enteric coating, i.e. HPMCP and HPMCAS was faster compared with the water soluble polymer HPMC 3cps. In conclusion, of the 3 polymers studied for preparing solid dispersions of thermally sensitive compound using hot melt extrusion, HPMCAS was found to be the most promising as it was easily processible and provided stable solid dispersions with enhanced dissolution.     

Inclusion complexes of tadalafil with natural and chemically modified β-cyclodextrins. I: Preparation and in-vitro evaluation

The aim of this work was to investigate the inclusion complexation between tadalafil, a practically insoluble selective phosphodiesterase-5 inhibitor (PDE5), and two chemically modified β-cyclodextrins: hydroxypropyl-β-cyclodextrin (HP-β-CD) and heptakis-[2,6-di-O-methyl]-β-cyclodextrin (DM-β-CD), in comparison with the natural β-cyclodextrin (β-CD) in order to improve the solubility and the dissolution rate of the drug in an attempt to enhance its bioavailability. Inclusion complexation was investigated in both the solution and the solid state. The UV spectral shift method indicated guest–host complex formation between tadalafil and the three cyclodextrins (CDs). The phase solubility profiles with all the used CDs were classified as A_p-type, indicating the formation of higher order complexes. The complexation efficiency values (CE), which reflect the solubilizing power of the CDs towards the drug, could be arranged in the following order: DM-β-CD > HP-β-CD > β-CD. Solid binary systems of tadalafil with CDs were prepared by kneading and freeze-drying techniques at molar ratios of 1:1, 1:3 and 1:5 (drug to CD). Physical mixtures were prepared in the same molar ratios for comparison. Physicochemical characterization of the prepared systems at molar ratio of 1:5 was studied using differential scanning calorimetry (DSC), X-ray diffractometry (XRD), and Fourier-transform infrared spectroscopy (FTIR). The results showed the formation of true inclusion complexes between the drug and both HP-β-CD and DM-β-CD using the freeze-drying method at molar ratio of 1:5. In contrast, crystalline drug was detectable in all other products. The dissolution of tadalafil from all the prepared binary systems was carried out to determine the most appropriate CD type, molar ratio, and preparation technique to prepare inclusion complexes to be used in the development of tablet formulation for oral delivery of tadalafil. The dissolution enhancement was increased on increasing the CD proportion in all the prepared systems. Both the CD type and the preparation technique played an important role in the performance of the system. Irrespective of the preparation technique, the systems prepared using HP-β-CD and DM-β-CD yielded better performance than the corresponding ones prepared using β-CD. In addition, the freeze-drying technique showed superior dissolution enhancement than other methods especially when combined with the β-CD derivatives.     

Modulated dissolution rate from the inclusion complex of antichagasic benznidazole and cyclodextrin using hydrophilic polymer

Benznidazole (BNZ) is the primary chemotherapeutic agent for treating Chagas’ disease; however, its poor water solubility and irregular oral absorption lead to the treatment failure in the chronic phase. The aim of this work was to investigate the utility of the polymer hydroxypropyl methylcellulose (HPMC) in controlling the release of BNZ from solid inclusion complexes with cyclodextrin to overcome the problem of its bioavailability. Preliminary studies of solubility were conducted in solution using selected β-cyclodextrin derivatives according to an experimental mixture design. The best cyclodextrin composition was used to produce solid-state systems by kneading in the presence or absence of HPMC. The formulations were characterized by different physico-chemical techniques, including the dissolution rate. Hydroxypropyl-β-cyclodextrin (HPβCD) produced the greatest improvement in drug solubility and was selected for the development of solid systems. Assays confirmed the production of true inclusion complexes between BNZ and HPβCD. The dissolution rate of the BNZ-HPβCD system was markedly increased, while the presence of HPMC retarded drug release. An optimal formulation obtained by the combination of kneading systems developed in appropriate ratios could be a promising drug delivery system with a prolonged therapeutic effect coupled with more balanced bioavailability. The produced systems present interesting perspectives for Chagas’ therapy.     

Inclusion complexes of tadalafil with natural and chemically modified β-cyclodextrins. I: Preparation and in-vitro evaluation

The aim of this work was to investigate the inclusion complexation between tadalafil, a practically insoluble selective phosphodiesterase-5 inhibitor (PDE5), and two chemically modified β-cyclodextrins: hydroxypropyl-β-cyclodextrin (HP-β-CD) and heptakis-[2,6-di-O-methyl]-β-cyclodextrin (DM-β-CD), in comparison with the natural β-cyclodextrin (β-CD) in order to improve the solubility and the dissolution rate of the drug in an attempt to enhance its bioavailability. Inclusion complexation was investigated in both the solution and the solid state. The UV spectral shift method indicated guest–host complex formation between tadalafil and the three cyclodextrins (CDs). The phase solubility profiles with all the used CDs were classified as A_p-type, indicating the formation of higher order complexes. The complexation efficiency values (CE), which reflect the solubilizing power of the CDs towards the drug, could be arranged in the following order: DM-β-CD > HP-β-CD > β-CD. Solid binary systems of tadalafil with CDs were prepared by kneading and freeze-drying techniques at molar ratios of 1:1, 1:3 and 1:5 (drug to CD). Physical mixtures were prepared in the same molar ratios for comparison. Physicochemical characterization of the prepared systems at molar ratio of 1:5 was studied using differential scanning calorimetry (DSC), X-ray diffractometry (XRD), and Fourier-transform infrared spectroscopy (FTIR). The results showed the formation of true inclusion complexes between the drug and both HP-β-CD and DM-β-CD using the freeze-drying method at molar ratio of 1:5. In contrast, crystalline drug was detectable in all other products. The dissolution of tadalafil from all the prepared binary systems was carried out to determine the most appropriate CD type, molar ratio, and preparation technique to prepare inclusion complexes to be used in the development of tablet formulation for oral delivery of tadalafil. The dissolution enhancement was increased on increasing the CD proportion in all the prepared systems. Both the CD type and the preparation technique played an important role in the performance of the system. Irrespective of the preparation technique, the systems prepared using HP-β-CD and DM-β-CD yielded better performance than the corresponding ones prepared using β-CD. In addition, the freeze-drying technique showed superior dissolution enhancement than other methods especially when combined with the β-CD derivatives.     

Development and evaluation of pharmacosomes of aceclofenac

Pharmacosomes are amphiphilic lipid vesicular systems containing phospholipid complexes with a potential to improve bioavailability of poorly water soluble as well as poorly lipophilic drugs. To improve the water solubility, bioavailability and minimize the gastrointestinal toxicity of aceclofenac, its pharmacosomes were prepared. Aceclofenac was complexed with phosphatidylcholine (80%) in two different ratios (1:1 and 2:1) using conventional solvent evaporation technique. Pharmacosomes thus prepared were subjected to solubility and drug content evaluation, scanning electron microscopy, differential scanning calorimetry, X ray powder diffraction and in vitro dissolution study. Pharmacosomes of aceclofenac were found to be disc shaped with rough surface in scanning electron microscopy. Drug content was found to be 91.88% (w/w) for aceclofenac phospholipid complex (1:1) and 89.03% (w/w) aceclofenac-phospholipid complex (2:1). Differential scanning calorimetric thermograms and X ray powder diffraction datas confirmed the formation of phospholipid complex. Solubility and dissolution profile of the prepared complex was found to be much better than aceclofenac.     

Development of novel ibuprofen-loaded solid dispersion with improved bioavailability using aqueous solution

To develop a novel ibuprofen-loaded solid dispersion with enhanced bioavailability, various ibuprofen-loaded solid dispersions were prepared with water, HPMC and poloxamer. The effect of HPMC and poloxamer on aqueous solubility of ibuprofen was investigated. The dissolution and bioavailability of solid dispersion in rats were then evaluated compared to ibuprofen powder. When the amount of carrier increased with a decreased in HPMC/poloxamer ratio, the aqueous solubility of ibuprofen was elevated. The solid dispersion composed of ibuprofen/HPMC/poloxamer at the weight ratio of 10:3:2 improved the drug solubility approximately 4 fold. It gave significantly higher initial plasma concentration, AUC and Cmax of drug than did ibuprofen powder in rats. The solid dispersion improved the bioavailability of drug about 4-fold compared to ibuprofen powder. Thus, this ibuprofen-loaded solid dispersion with water, HPMC and poloxamer was a more effective oral dosage form for improving the bioavailability of poor water-soluble ibuprofen.     

Characterization of nifedipine solid dispersions

The sublingual administration of nifedipine (NIF) is currently used in clinical practice. The sublingual administration of NIF solid dispersions (SD), by using a suitable dispenser, appears an interesting approach in the treatment of moderate and severe hypertensive emergencies. With this aim nine SD made of NIF and a low viscosity hydroxypropylmethylcellulose (HPMC) in different ratio were prepared by means of spray-drying technique and their structure was studied. Moreover, the drug dissolution properties from SD were verified. The characteristic peaks of crystalline NIF were not detectable by using the X-ray analysis when the NIF/HPMC ratios were lower than 50/50 w/w. In thermograms obtained from SD, the NIF melting endothermic peak disappeared when NIF/HPMC ratios were lower than 30/70 w/w; the experimental Tg values of SD were lower than the Tg values predicted by Gordon Taylor equation suggesting some type of non-ideality of mixing. In the SD FTIR spectra the NH stretching vibrations and the C=O stretch in esteric groups of NIF shift to free NH and C=O regions indicating the rupture of intermolecular hydrogen bond in the crystalline structure of NIF. The prepared SD improved the NIF dissolution rate in comparison with that of commercial NIF or NIF/HPMC physical mixtures. Moreover, the concentration of NIF in the dissolution medium increased decreasing the NIF content.     

羟丙基-β-环糊精包合对穿心莲内酯的增溶作用

目的研究羟丙基-β-环糊精(HP-β-CD)包合对穿心莲内酯(AND)溶解度和溶出度的增强作用。方法以HP-β-CD为载体,分别采用研磨法、超声波法和共沉淀法制备AND的HP-β-CD包合物,测定其溶出度和溶解度,并与AND原药、AND和HP-β-CD的物理混合物的溶出性能进行比较。结果 AND与HP-β-CD形成了包合物,HP-β-CD可使AND溶解度增加55.4倍。结论HP-β-CD极大地增加了AND的溶解度和溶出度。     

Preparation of a solid dispersion of felodipine using a solvent wetting method.

A straightforward solvent wetting method was used to prepare felodipine solid dispersions in the presence of various carriers. Dichloromethane is not needed when HPMC solid dispersions were produced using the solvent wetting method. The amount of ethanol used to prepare solid dispersions did not have a significant effect on the dissolution rate of felodipine. The results of X-ray diffraction and thermal analysis indicated that the drug was in the amorphous state when PVP, HPMC, and poloxamer were used as carriers. The dissolution rates of felodipine in PVP, HPMC, or poloxamer solid dispersions were much faster than those for the corresponding physical mixtures. However, dissolution profiles were found to depend on the carrier used; the dissolution rate of felodipine increased slowly for solid dispersions prepared using HPMC, whereas rapid initial dissolution rates were observed for solid dispersions prepared using PVP or poloxamer. Increases in dissolution rates were partly dependent on the ratios of felodipine to carrier. No significant changes in crystal form were observed by X-ray diffraction or thermal analysis, and no significant changes in dissolution rate were observed when sorbitol and mannitol were used as carriers.     

The effect of pH and triethanolamine on sulfisoxazole complexation with hydroxypropyl-beta-cyclodextrin.

A novel complexation of sulfisoxazole with hydroxypropyl-beta-cyclodextrin (HP-beta-CD) was studied. Two systems were used: binary complexes prepared with HP-beta-CD and multicomponent system (HP-beta-CD and the basic compound triethanolamine (TEA)). Inclusion complex formation in aqueous solutions and in solid state were investigated by the solubility method, thermal analysis (differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA)), Fourier-transform infrared spectroscopy (FT-IR) and dissolution studies. The solid complexes of sulfisoxazole were prepared by freeze-drying the homogeneous concentrated aqueous solutions in molar ratios of sulfisoxazole:HP-beta-CD 1:1 and 1:2, and sulfisoxazole:TEA:HP-beta-CD 1:1:2. FT-IR and thermal analysis showed differences among sulfisoxazole:HP-beta-CD and sulfisoxazole:TEA:HP-beta-CD and their corresponding physical mixtures and individual components. The HP-beta-CD solubilization of sulfisoxazole could be improved by ionization of the drug molecule through pH adjustments. However, larger improvements of the HP-beta-CD solubilization are obtained when multicomponent systems are used, allowing to reduce the amount of CD necessary to prepare the target formulation.     

In vitro release,rheological, and stability studies of mefenamic acid coprecipitates in topical formulations

A suitable topical formulation of mefenamic acid was developed in order to eliminate the gastrointestinal disorders associated with its oral administration. Drug coprecipitates prepared with different polymers at various drug-to-polymer ratios improved drug solubility and dissolution compared to pure drug and physical mixtures. PVP polymers (ratio 1:4) produced the best results. Aqueous ionic cream, ointments of absorption and water soluble bases and gels of methylcellulose, carboxymethylcellulose sodium, HPMC, Carbopol^® 934 and 940, and Pluronic^® F127 bases containing 1–10% drug as coprecipitates of PVP polymers (1:4) were prepared. The highest drug release was achieved at 1% drug concentration from water soluble base and methylcellulose among cream/ointment and gel bases, respectively. Gels, in general yielded better release than creams/ointments. All tested medicated creams/ointments exhibited plastic flow while all gels conformed to pseudoplasticity. Most of them showed thixotropy, a desired property of topical preparations. Stability studies revealed that HPMC and methylcellulose had the smallest changes in drug content, viscosity, and pH among the formulations. Considering drug release, rheological properties, and stability, methylcellulose gel containing 1% drug as coprecipitates of PVP K90 was the best among the studied formulations, was promising for improving bioavailability of mefenamic acid and can be used in future studies.     

Dissolution properties and characterization of halofantrine-2-hydroxypropyl-beta-cyclodextrin binary systems

Halofantrine (HF) is a poorly water-soluble antimalarial drug with low bioavailability. Complex formation of HF.HCl and 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CD) in aqueous solution and in solid state as well as the possibility of improving the solubility and dissolution rate of the drug though complexation with the cyclodextrin were investigated. Phase-solubility profile indicated that the solubility of the drug was significantly increased in the presence of HP-beta-CD and was classified as AL-type, indicating 1:1 stoichiometric inclusion complexes and an apparent stability constant value of 2300 M(-1). Solid inclusion complexes of HF, HCl and the cyclodextrin at 1:1 molar ratios were prepared by physical mixture, kneading, co-evaporation and freeze-drying methods and characterized by X-ray diffraction and Infra-red spectroscopy. The solubility and dissolution rates of HF.HCl from the complexes were determined and found to be dependent on the preparation method of the complexes. Dissolution profile of the drug was markedly enhanced by complex formation with the cyclodextrin and the product prepared by the freeze-drying method exhibited the most superior dissolution properties compared to the other methods used in this study. The results suggest that the complexation of HF.HCl with HP-beta-CD could improve therapeutic efficacy of the drug though enhanced absorption expected from increased drug dissolution.     

In vitro and in vivo evaluation of an amylobarbitone/hydroxypropyl-beta-cyclodextrin complex prepared by a freeze-drying method

The complex formation of amylobarbitone (AMB) with 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CD) was investigated in aqueous solution and in the solid state. The apparent stability constant for complex formation (Kc) calculated by phase solubility and spectral shift methods was 524 M-1 and 568 M-1, respectively. The stoichiometric molar ratio of the complex was estimated to be 1:1 and the solubility of AMB in water was increased about 3 fold. The solid dispersion system of AMB/HP-beta-CD in 1:1 molar ratio was prepared by a freeze-drying method. Differential scanning calorimetry (DSC), x-ray diffractometry, (IR) and 1H NMR spectroscopy were used to confirm that inclusion between the drug and HP-beta-CD occurred. The dissolution behavior of the drug as a physical mixture as well as the prepared complex, showed enhanced drug dissolution properties of the prepared complex compared to the physical mixture or the drug alone. The dissolution rate appeared in the first 2 min, 25 times greater for the complex than for the drug alone. Furthermore, in-vivo study revealed that the duration and hypnotic activity of AMB after its oral administration to mice were improved by inclusion.     

Rofecoxib-beta-cyclodextrin inclusion complex for solubility enhancement

Complex formation of rofecoxib and beta-cyclodextrin in aqueous solution and in solid state and the possibility of improving the solubility and dissolution rate of rofecoxib via complexation with cyclodextrin were investigated. Phase solubility studies indicated the formation of an 1:1 complex in solution and the value of apparent stability constant was 769 M(-1). Solid inclusion complexes of rofecoxib and cyclodextrin were prepared by the kneading method in different molar ratios. Differential scanning calorimetry studies indicated the formation of solid inclusion complexes of rofecoxib and cyclodextrin at different molar ratios and the solid complexes exhibited a higher rate of dissolution than the physical mixture and the pure drug.     

Solubility enhancement of celecoxib using beta-cyclodextrin inclusion complexes.

Celecoxib has very low water solubility. It forms a complex with beta-cyclodextrin (betaCD) both in aqueous and in solid state. It was observed that due to formation of the inclusion complex, the solubility and dissolution rate of celecoxib were enhanced. The formation of 1:1 complex with betaCD in solution was confirmed by phase solubility and spectral shift studies. The apparent stability constants calculated by these techniques were 881.5 and 341.5 M(-1), respectively. The solid inclusion complexes of celecoxib and betaCD were prepared by the kneading method using different molar proportions of betaCD, and formation of solid inclusion complexes of celecoxib and betaCD at different molar ratios were confirmed by differential scanning calorimetry. Enhancement of dissolution rates with increasing quantity of betaCD in the complex was observed. It was also observed that the complexes exhibit higher dissolution rates than the pure drug and physical mixture.     

Effect of various surfactants and their concentration on controlled release of captopril from polymeric matrices

Various methods are available to formulate water soluble drugs into sustained release dosage forms by retarding the dissolution rate. One of the methods used to control drug release and thereby prolong therapeutic activity is to use hydrophilic and lipophilic polymers. In this study, the effects of various polymers such as hydroxypropyl methylcellulose (HPMC), ethylcellulose (EC) and sodium carboxymethylcellulose (CMC) and surfactants (sodium lauryl sulphate, cetyltrimethylammonium bromide and Arlacel 60) on the release rate of captopril were investigated. The results showed that an increase in the amount of HPMC K15M resulted in reduction of the release rate of captopril from these matrices. When HPMC was partly replaced by NaCMC (the ratio of HPMC/NaCMC was 5:1), the release rate of the drug significantly decreased. However, there was no significant difference in release rate of captopril from matrices produced with ratios of 5:1 and 2:1 of HPMC/NaCMC. The presence of lactose in matrices containing HPMC and NaCMC increased the release rate of captopril. It was interesting to note that although partial replacement of HPMC by EC reduced the release rate of the drug (ratio of HPMC/EC 2:1), the release rate was increased when the ratio of HPMC/EC was reduced to 1:1. The effects of various surfactants on the release rate of captopril from HPMC/EC (1:1) matrices were also investigated. The results showed that the surfactants did not significantly change the release rate of the drug. Release data were examined kinetically and the ideal kinetic models were estimated for the drug release. The kinetic analysis of drug release data from various formulations showed that incorporation of surfactants in HPMC/EC matrices did not produce a zero-order release pattern.     

Influence of cyclodextrin complexation on piroxicam gel formulations

The aim of this work was to evaluate the role of cyclodextrins in topical drug formulations. Solid piroxicam (PX) complexes with beta-cyclodextrin (beta-CD) and randomly methylated beta-cyclodextrin (RAMEB) were prepared by freeze-drying and characterized using differential scanning calorimetry (DSC), X-ray powder diffractometry (XRPD), Fourier transform infrared spectroscopy (FTIR) and near infrared spectroscopy (NIR). A physical mixture of PX and cyclodextrins was characterized by enhanced dissolution properties compared to the dissolution profile of the pure drug due to in situ complex formation. Formation of the PX-cyclodextrin inclusion complex additionally improved the drug dissolution properties. Influence of CDs on drug permeation from the water dispersion and the prepared hydroxypropyl methylcellulose (HPMC) gels was investigated. Permeation of the drug involved three consecutive processes: dissolution of the solid phase, diffusion across the swollen polymer matrix and drug permeation through the membrane. Complexation increased PX diffusion by increasing the amount of diffusible species in the donor phase. Slower drug diffusion through the HPMC matrix was the rate limiting step in the overall diffusion process. Possible interaction between the hydrophilic polymer and cyclodextrin may result in physicochemical changes, especially in a change of rheological parameters.     

Dissolution of ibuprofen enantiomers from coprecipitates and suspensions containing chiral excipients

The purpose of this research was to evaluate the stereospecific interaction of ibuprofen with chiral excipients such as hydroxypropyl-beta-cyclodextrin (HPCD), tartaric acid, sucrose, hydroxypropylmethylcellulose (HPMC), methylcellulose (MC), and a nonchiral excipient, citric acid. Coprecipitates of ibuprofen were prepared in molar ratios ranging between 1:0.5 and 1:10 by a solvent evaporation method and characterized using x-ray diffraction, Fourier-transform infrared (FTIR) spectroscopy, and dissolution testing. Phase solubility studies of ibuprofen were carried out by adding excess amount of ibuprofen to aqueous excipient solutions of varying concentrations. Interaction was studied in suspensions of ibuprofen with HPMC, MC, and sucrose stored at room temperature and 60 degrees C for 12 weeks. Solubility of ibuprofen in HPCD solutions increased 10-fold, whereas solubility decreased in the tartaric and citric acid solutions, a result of decreased pH with increased amount of the acids in which ibuprofen (pKa 4.8) is less soluble. Phase solubility diagrams of ibuprofen in aqueous HPCD, citric acid, and tartaric acid solutions showed no stereospecific differences in solubility of the two enantiomers. X-ray diffraction studies showed that ibuprofen exists in a crystalline form at low ibuprofen-to-excipient ratios, whereas at the higher ratios, it exists in an amorphous form. FTIR spectroscopy for HPCD coprecipitates showed a shift of the carbonyl stretching band of ibuprofen to a higher wavelength with a markedly decreased intensity, probably because of a breakdown in the intermolecular hydrogen bonding with ibuprofen and restriction of the drug molecule in the HPCD cavity, respectively. Dissolution profiles of the coprecipitates demonstrated higher dissolution rates than those of pure ibuprofen. The presence of chiral excipients did not appear to cause stereoselective release of the drug from the coprecipitates and the suspensions.     

Characterization of solid dispersions of itraconazole and hydroxypropylmethylcellulose prepared by melt extrusion--Part I

Solid dispersions containing different ratios of itraconazole and hydroxypropylmethylcellulose (HPMC) were prepared by solvent casting. Based on dose, differential scanning calorimetry and dissolution results, a drug/polymer ratio of 40/60 w/w was selected in order to prepare dispersions by melt extrusion. The melt extrusion process was characterized using a design of experiments (DOE) approach. All parameter settings resulted in the formation of an amorphous solid dispersion whereby HPMC 2910 5 mPas prevents re-crystallization of the drug during cooling. Dissolution measurements demonstrated that a significantly increased dissolution rate was obtained with the amorphous solid dispersion compared to the physical mixture. The outcome of DOE further indicated that melt extrusion is very robust with regard to the itraconazole/HPMC melt extrudate characteristics. Stability studies demonstrated that the itraconazole/HPMC 40/60 w/w milled melt extrudate formulation is chemically and physically stable for periods in excess of 6 months as indicated by the absence of degradation products or re-crystallization of the drug.