In vitro evaluation of drug release from self micro-emulsifying drug delivery systems using a biodegradable homolipid from Capra hircus

Self micro-emulsifying drug delivery systems (SMEDDS) are specialized form of delivery systems in which drugs are encapsulated in a lipid base with or without a pharmaceutically acceptable surfactant. In this work, SMEDDS were formulated with a biodegradable homolipid from Capra hircus and Tween 65, and contained lipophilic drug-piroxicam, hydrophilic drug-chlorpheniramine maleate and hydrolipophilic drug-metronidazole. The SMEDDS formulated were evaluated for their drug release and drug content. The drug release studies were conducted in simulated gastric fluid (SGF), simulated intestinal fluid (SIF), and distilled water, representing different pH values. Particle size of the SMEDDS was determined by light microscopy. The results of this study indicated that drug release was affected by the particle size of the SMEDDS. It was found that piroxicam release from the SMEDDS formulated with homolipids from Capra hircus was highest in SIF compared to the other drugs. This method of drug delivery could prove to be a versatile and reliable alternative to conventional drug delivery approaches.     

Comparison of solid self-microemulsifying drug delivery system (solid SMEDDS) prepared with hydrophilic and hydrophobic solid carrier

In order to compare the effects of hydrophilic and hydrophobic solid carrier on the formation of solid self-microemulsifying drug delivery system (SMEDDS), two solid SMEDDS formulations were prepared by spray-drying the solutions containing liquid SMEDDS and solid carriers. Colloidal silica and dextran were used as a hydrophobic and a hydrophilic carrier, respectively. The liquid SMEDDS, composed of Labrafil M 1944 CS/Labrasol/Trasncutol HP (12.5/80/7.5%) with 2% w/v flurbiprofen, gave a z-average diameter of about 100 nm. Colloidal silica produced an excellent conventional solid SMEDDS in which the liquid SMEDDS was absorbed onto its surfaces. It gave a microemulsion droplet size similar to that of the liquid SMEDDS (about 100 nm) which was smaller than the other solid SMEDDS formulation. In the solid SMEDDS prepared with dextran, liquid SMEDDS was not absorbed onto the surfaces of carrier but formed a kind of nano-sized microcapsule with carrier. However, the drug was in an amorphous state in two solid SMEDDS formulations. Similarly, they greatly improved the dissolution rate and oral bioavailability of flurbiprofen in rats due to the fast spontaneous emulsion formation and the decreased droplet size. Thus, except appearance, hydrophilic carrier (dextran) and hydrophobic carrier (colloidal silica) hardly affected the formation of solid SMEDDS such as crystalline properties, dissolution and oral bioavailability.     

Development and characterisation of a self-microemulsifying drug delivery systems (SMEDDSs) for the vaginal administration of the antiretroviral UC-781

UC-781 is highly selective and potent against HIV-1. However, its hydrophobic nature (log P 5.1) and lack of aqueous solubility have limited its development as a HIV microbicide. Self-microemulsifying drug delivery systems (SMEDDSs) have been developed to enhance the water solubility and bioavailability of hydrophobic drugs, such as UC781. In this study, we show the development of UC781-loaded SMEDDS and their enhanced release of UC781 from hard gelatine capsules, when compared to UC781 powder only. The majority of antiretrovirals being evaluated as potential HIV microbicides are hydrophobic. Therefore, a SMEDDS formulation offers an alternative approach to enhancing the vaginal absorption of these microbicidal candidates.     

pH-sensitive Eudragit nanoparticles for mucosal drug delivery

Drug delivery via vaginal epithelium has suffered from lack of stability due to acidic and enzymatic environments. The biocompatible pH-sensitive nanoparticles composed of Eudragit S-100 (ES) were developed to protect loaded compounds from being degraded under the rigorous vaginal conditions and achieve their therapeutically effective concentrations in the mucosal epithelium. ES nanoparticles containing a model compound (sodium fluorescein (FNa) or nile red (NR)) were prepared by the modified quasi-emulsion solvent diffusion method. Loading efficiencies were found to be 26% and 71% for a hydrophilic and a hydrophobic compound, respectively. Both hydrophilic and hydrophobic model drugs remained stable in nanoparticles at acidic pH, whereas they are quickly released from nanoparticles upon exposure at physiological pH. The confocal study revealed that ES nanoparticles were taken up by vaginal cells, followed by pH-responsive drug release, with no cytotoxic activities. The pH-sensitive nanoparticles would be a promising carrier for the vaginal-specific delivery of various therapeutic drugs including microbicides and peptides/proteins.     

Development of self-microemulsifying drug delivery systems for oral bioavailability enhancement of alpha-Asarone in beagle dogs

A self-microemulsifying drug delivery system (SMEDDS) for enhancement of oral absorption of a poor water-soluble drug, alpha-Asarone (ARE), is reported. Solubility of ARE was determined in various vehicles. SMEDDS consisted of a mixture of oils, surfactants, and cosurfactants that were emulsified in an aqueous medium under the gentle agitation and digestive motility. Pseudo-ternary phase diagrams were used to identify the efficient self-emulsification regions. The particle size distribution of the resulting microemulsions was determined using a laser scatter particle size analyzer (LSPSA). The optimized SMEDDS formulations containing Ethyl oleate (20%), Tween 80 (60%), and PEG 400 (20%) were tested for in vitro dissolution. The percentage of ARE released from the SMEDDS was significantly higher than that from the conventional tablets. Oral bioavailability of ARE in the SMEDDS via the hard capsules and the conventional tablets was evaluated in fasted beagle dogs. The bioavailability of ARE formulated in SMEDDS showed approximately 4.8-fold higher bioavailability than that in the conventional tablets. The results indicated that SMEDDS is potentially a good drug delivery system for oral delivery of the hydrophobic compound ARE.     

A new method for encapsulating hydrophobic compounds within cationic polymeric nanoparticles

Here we present the newly developed “solvent exchange” method that overcomes the challenge of encapsulating hydrophobic compounds within nanoparticle of water soluble polymers. Our studies involved the model polymer polyvinylpyrrolidone (PVP) and the hydrophobic dye Nile red. We found that the minimum molecular weight of the polymer required for nanoparticle formation was 49?KDa. Dynamic Light Scattering (DLS) and Cryo-Transmission Electron Microscopy (cryo-TEM) studies revealed spherical nanoparticles with an average diameter ranging from 20 to 33?nm. Encapsulation efficiency was evaluated using UV spectroscopy and found to be around 94%. The nanocarriers were found to be highly stable; less than 2% of Nile red release from nanoparticles after the addition of NaCl. Nanoparticles containing Nile red were able to penetrate into glioma cells. The solvent exchange method was proved to be applicable for other model hydrophobic drug molecules including ketoprofen, ibuprofen and indomethacin, as well as other solvents.     

Effects of drug hydrophobicity on liposomal stability

A major obstacle in drug delivery is the inability to effectively deliver drugs to their intended biological target without deleterious side-effects. Delivery vehicles such as liposomes can minimize toxic side-effects by shielding the drug from reaction with unintended targets while in systemic circulation. Liposomes have the ability to accommodate both hydrophilic and hydrophobic drugs, either in the internal aqueous core or the lipid bilayer, respectively. In the present study, fluorescein and rhodamine have been used to model hydrophilic and hydrophobic drugs, respectively. We have compared the stabilities of liposomes encapsulating these fluorophores as a function of lipid content, time, and temperature. At 25 and 37 degrees C, liposomes containing distearoyl phosphatidylcholine as the major phospholipid component were found to be more stable over time than those containing dipalmitoyl phosphatidylcholine, regardless of the fluorophore encapsulated. Liposomes loaded with fluorescein were found to be more stable than those with rhodamine. Dipalmitoyl phosphatidylcholine liposomes that encapsulated rhodamine were the least stable. The results indicate that the physical properties of the drug cargo play a role in the stability, and hence drug delivery kinetics, of liposomal delivery systems, and desired drug release times can be achieved by adjusting/fine-tuning the lipid compositions.     

Biowaiver extension potential and IVIVC for BCS Class II drugs by formulation design: Case study for cyclosporine self-microemulsifying formulation

The objective of this work was to suggest the biowaiver potential of biopharmaceutical classification system (BCS) Class II drugs in self-microemulsifying drug delivery systems (SMEDDS) which are known to increase the solubility, dissolution and oral absorption of water-insoluble drugs. Cyclosporine was selected as a representative BCS Class II drug. New generic candidate of cyclosporine SMEDDS (test) was applied for the study with brand SMEDDS (reference I) and cyclosporine self-emulsifying drug delivery systems (SEDDS, reference II). Solubility and dissolution of cyclosporine from SMEDDS were critically enhanced, which were the similar behaviors with BCS class I drug. The test showed the identical dissolution rate and the equivalent bioavailability (0.34, 0.42 and 0.68 of p values for AUC_0→24h, C_max and T_max, respectively) with the reference I. Based on the results, level A in vitro-in vivo correlation (IVIVC) was established from these two SMEDDS formulations. This study serves as a good example for speculating the biowaiver extension potential of BCS Class II drugs specifically in solubilizing formulation such as SMEDDS.     

Hydrophilic polymeric matrices for enhanced transdermal drug delivery

For many drugs with various chemical structures, delivery rates from the hydrophilic polyvinylpyrrolidone (PVP)-polyethylene oxide (PEO) based pressure sensitive adhesive (PSA) matrices of transdermal therapeutic systems (TTS) are higher compared to the hydrophobic TTS matrices. Delivery of propranolol, glyceryl trinitrate (GTN) and isosorbide dinitrate (ISDN) from the hydrophilic water soluble TTS matrix across human cadaver skin epidermis or skin-imitating polydimethylsiloxane-polycarbonate block copolymer Carbosil membrane in vitro is characterized by high rate values and zero-order drug delivery kinetics up to the point of 75–85% drug release from their initial contents in matrix. Both in vitro and in vivo drug delivery rates from the TTS hydrophilic diffusion matrix are controlled by the skin or membrane permeability and may be described by Fick's law. The contributions of various physicochemical determinants to the control of transdermal drug delivery kinetics are discussed. Pharmacokinetic and pharmacodynamic properties of hydrophilic TTS matrix with propranolol, GTN and ISDN are described.     

Co-delivery of honokiol,a constituent of Magnolia species,in a self-microemulsifying drug delivery system for improved oral transport of lipophilic sirolimus

Sirolimus is recognized as a P-glycoprotein (P-gp) substrate with poor water-solubility. To improve its solubility and bioabsorption, self-microemulsifying drug delivery systems (SMEDDS) containing a novel P-gp inhibitor, honokiol, were prepared. The aim of this work was to evaluate the enhanced transport of sirolimus SMEDDS as well as the roles of honokiol. In situ single-pass intestinal perfusion and in vitro human colon adenocarcinoma (Caco-2) cell models were applied to study the effects of honokiol within SMEDDS on the transport of sirolimus. The results indicated that a combination of honokiol with sirolimus in SMEDDS did not significantly alter the particle size, polydispersity index and release of drugs. In addition, the absorption rate constant (K_a) as well as the effective permeability coefficients (P_eff) of sirolimus in situ intestinal absorption, and the apparent permeability coefficients (P_app) of sirolimus in caco-2 cells were significantly enhanced by cremophor EL-based SMEDDS with honokiol as compared with those of SMEDDS without honokiol. Rhodamine123 uptake rate in caco-2 cells and in vitro cytotoxicity of sirolimus were enhanced by honokiol in SMEDDS indicating a substantial P-gp inhibition of honokiol. In conclusion, coadministration of honokiol with poor soluble P-gp substrate in SMEDDS, could serve as a favorable approach for oral delivery.     

Investigation of self-microemulsifying and microemulsion systems for protection of prednisolone from gamma radiation

Radiation is efficient for terminal sterilization. Unfortunately, its use for liquid pharmaceuticals is difficult. This work investigated the potential radioprotective effect of self-microemulsifying (SMEDDS), microemulsions and their phase transition systems which were reported to enhance ocular drug delivery. Prednisolone solutions were prepared in SMEDDS, W/O microemulsions containing, 5% w/w (ME 5%) or 10% w/w (ME 10%) water, liquid crystalline system with 25% water (LC) and coarse emulsion containing 80% water (EM). These were subjected to gamma irradiation with aqueous solution and suspension being used as control. The physical properties of the formulations were monitored and the chemical potency of the drug was determined using a stability indicating HPLC method. The phase behavior of the formulations was not affected by irradiation but the viscosity of LC was significantly reduced. The SMEDDS, ME 5% and ME 10% showed excellent radiation protection as indicated by no change in the chemical potency. The LC retained 84% and the EM retained 39.8% of the chemical potency after exposure to 20 KGy. The aqueous solution was extensively degraded with the suspension retaining only 73.5% of the potency at 20 KGy. SMEDDS and W/O microemulsion can thus protect prednisolone from degradation by ionizing radiation.     

Enhanced intestinal lymphatic absorption of saquinavir through supersaturated self-microemulsifying drug delivery systems

The therapeutic potential of saquinavir, a specific inhibitor of human immunodeficiency virus (HIV)-1 and HIV-2 protease enzymes, has been largely limited because of a low solubility and consequnt low bioavailability. Thus, we aimed to design a supersaturated self-microemulsifying drug delivery system (S-SMEDDS) that can maintain a high concentration of saquinavir in gastro-intestinal fluid thorugh inhibiting the drug precipitation to enhance the lymphatic transport of saquinavir and to increase the bioavailability of saquinavir considerably. Solubilizing capacity of different oils, surfactants, and cosurfactants for saquinavir was evaluated to select optimal ingredients for preparation of SMEDDS. Through the construction of pseudo-ternary phase diagram, SMEDDS formulations were established. A polymer as a precipitation inhibitor was selected based on its viscosity and drug precipitation inhibiting capacity. The S-SMEDDS and SMEDDS designed were administered at an equal dose to rats. At predetermined time points, levels of saquinavir in lymph collected from the rats were assessed. SMEDDS prepared presented a proper self-microemulsification efficiency and dispersion stability. The S-SMEDDS fabricated using the SMEDDS and hydroxypropyl methyl cellulose 2910 as a precipitation inhibitor exhibited a signficantly enhanced solubilizing capacity for saquinavir. The drug concentration in a simulated intestinal fluid evaluated with the S-SMEDDS was also maintained at higher levels for prolonged time than that examined with the SMEDDS. The S-SMEDDS showed a considerably enhanced lymphatic absoprtion of saquinavir in rats compared to the SMEDDS. Therefore, the S-SMEDDS would be usefully exploited to enhance the lymphatic absorption of hydrophobic drugs that need to be targeted to the lymphatic system.     

In vitro and in vivo evaluation of a self-microemulsifying drug delivery system for the poorly soluble drug fenofibrate

Fenofibrate is indicated in hypercholesterolemia and hypertriglyceridemia alone or combined (types IIa, IIb, III, IV, and V dyslipidemias). However, due to its low solubility in water, it has low bioavailability after oral administration. In order to improve the dissolution rate, fenofibrate was formulated into a self-microemulsifying drug delivery system (SMEDDS). We used pseudoternary phase diagrams to evaluate the area of microemulsification, and an in vitro dissolution test was used to investigate the dissolution rate of fenofibrate. The optimized formulation for in vitro dissolution and bioavailability assessment consisted of propylene glycol laurate (Lauroglycol FCC) (60 %), macrogol-15-hydroxystearate (Solutol HS 15) (27 %), and diethylene glycol monoethyl ether (Transcutol-P) (13 %). The mean droplet size of the oil phase in the microemulsion formed by the SMEDDS was 131.1 nm. The dissolution rate of fenofibrate from SMEDDS was significantly higher than that of the reference tablet. In vivo pharmacokinetics study of fenofibrate in beagles administered SMEDDS-A form resulted in a 3.7-fold increase in bioavailability as compared with the reference drug. Our studies suggested that the fenofibrate containing SMEDDS composition can effectively increase the solubility and oral bioavailability of poorly water-soluble drugs.     

Transdermal delivery of hydrophobic and hydrophilic local anesthetics from o/w and w/o Brij 97-based microemulsions.

PURPOSE: To characterize the physicochemical properties of drug-loaded oil-in-water (o/w) and water-in-oil (w/o) Brij 97-based microemulsions in comparison to their blank counterparts and to investigate the influence of microemulsion type on in vitro skin permeation of model hydrophobic drugs and their hydrophilic salts. METHODS: The microemulsion systems were composed of isopropyl palmitate (IPP), water and a 2:1 w/w mixture of Brij 97 and 1-butanol. The samples were characterized by visual appearance, pH, refractive index, electrical conductivity, viscosity and determination of the state of water and IPP in the formulations using differential scanning calorimetry (DSC). Transdermal flux of lidocaine, tetracaine, dibucaine and their respective hydrochloride salts through heat-separated human epidermis was investigated in vitro using modified Franz diffusion cells. RESULTS: The physicochemical properties of drug-loaded microemulsions and their blank counterparts were generally similar; however, slight changes in some physicochemical properties (apparent pH and conductivity) were observed due to the intrinsic properties of the drugs. The o/w microemulsions resulted in the highest flux of lidocaine, tetracaine and dibucaine as compared to the other formulations with in the same group of drugs. CONCLUSIONS: The characterization results showed that incorporation of the model drugs into the microemulsions did not change the microemulsion type. The permeation data exhibited that the nature of the microemulsions was a crucial parameter for transdermal drug delivery. The o/w microemulsions containing hydrophobic drugs provided the highest skin permeation enhancement. In addition, skin permeation was depended on the molecular weight of the model drugs.     

Formulation and biopharmaceutical evaluation of silymarin using SMEDDS

Silymarin has been used to treat hepatobiliary diseases. However, it has a low bioavailability after being administered orally on account of its low solubility in water. In order to improve the dissolution rate, silymarin was formulated in the form of a self-microemulsifying drug delivery system (SMEDDS). The optimum formulation of SMEDDS containing silymarin was obtained based on the study of pseudo-ternary phase diagram. The SMEDDS consisted of 15% silymarin, 10% glyceryl monooleate as the oil phase, a mixture of polysorbate 20 and HCO-50 (1:1) as the surfactant, Transcutol as the cosurfactant with a surfactant/cosurfactant ratio of 1. The mean droplet size of the oil phase in the microemulsion formed from the SMEDDS was 67 nm. The % release of silybin from the SMEDDS after 6 hours was 2.5 times higher than that from the reference capsule. After its oral administration to rats, the bioavailability of the drug from the SMEDDS was 3.6 times higher than the reference capsule.     

Ultrafine PEG-PLA fibers loaded with both paclitaxel and doxorubicin hydrochloride and their in vitro cytotoxicity

By means of “emulsion-electrospinning”, both hydrophobic and hydrophilic drugs, paclitaxel (PTX) and doxorubicin hydrochloride (DOX), were successfully loaded into PEG-PLA nanofiber mats to realize multi-drug delivery. The release behaviors of both the drugs from the same fiber mats were ascribed to their solubility properties and distribution status in the fibers. Due to its high hydrophilicity, DOX was easy to diffuse out from the fibers, and its release rate was always faster than that of hydrophobic PTX. Moreover, the release rate of PTX was accelerated by DOX’s release from the same drug-loaded fibers. In vitro cytotoxicity against rat Glioma C6 cells indicated that the dual drug combination showed a higher inhibition and apoptosis against C6 cells than a single drug-loaded system, which suggests the promise for multi-drug delivery on combination therapy.     

4-氨基-2-三氟甲基苯基维甲酸酯自微乳胶囊的研制

目的制备4-氨基-2-三氟甲基苯基维甲酸酯固体自乳化制剂,以解决该药水溶性差的问题,提高药物胃中溶出度和口服生物利用度。方法通过伪三元相图法考察不同乳化剂、助乳化剂和油相形成微乳的能力和区域,制备自微乳。然后采用mix-ture design方法进行处方优化,并对其乳化后粒径、制剂综合评分和载药量进行考察。结果制备出的最佳处方(含HS1570%,PEG400 10%,油酸乙酯20%)自乳化后粒径在30 nm左右,体外溶出10 min即可溶出80%以上。结论该处方制备出的ATPR固体自微乳可用于提高其溶出速度。     

Oral bioavailability enhancement of vinpocetine using self-microemulsifying drug delivery system containing long chain triglycerides: Preparation and in vitro/in vivo evaluation

Vinpocetine, a widely used neurotropic agent, has low oral bioavailability due to its poor solubility and extensive hepatic first-pass metabolism. In the present work, self-microemulsifying drug delivery systems (SMEDDS) employing long chain triglycerides (LCT) were successfully developed to increase vinpocetine’s solubility and reduce its hepatic first pass metabolism, thus enhancing its overall oral bioavailability. Maisine^?35-1 was chosen as the lipid component in the formulated SMEDDS as it showed the maximal vinpocetine solubility within different LCT tested. Feasibility of obtaining SMEDDS, containing Maisine^?35-1, together with Transcutol^®HP and either Cremophor^®EL or Tween 80, was evaluated using ternary phase diagrams. In vitro release studies performed in phosphate buffer of pH 7.4 illustrated that extent of vinpocetine release from SMEDDS was drastically higher than that obtained from commercial Cavinton^® tablets. The industrial usefulness of the developed SMEDDS was evaluated regarding their moisture sorption isotherms when filled into gelatin capsules and stored at different relative humidity. Vinpocetine’s optimal SMEDDS did not induce gross changes in the gastrointestinal mucosa of rats at the investigated dose. Moreover, it significantly improved the relative oral bioavailability of vinpocetine compared to Cavinton^® tablets. Accordingly, this study suggests that SMEDDS containing LCT under proper optimization and safety assessment can be effectively utilized for oral bioavailability enhancement of vinpocetine.     

两亲性壳聚糖衍生物在药物递送中的研究进展

壳聚糖是一种来源丰富的碱性多糖,具有良好的生物相容性和生物可降解性,但是其差的溶解性限制了壳聚糖在医药领域的应用。为了提高壳聚糖的溶解性,研究者对壳聚糖进行两亲性改性,通过选择不同的亲水、疏水基团,设计合成了两亲性壳聚糖衍生物。并利用其在水溶液中的自组装性能,形成两亲性壳聚糖纳米粒,用于多种药物的递送,以达到增加药物溶解性、稳定性、降低药物毒性和提高生物利用度等目的。本文综述了两亲性壳聚糖衍生物的合成方法,以及其在药物递送系统中的应用。     

Design,characterization and in vitro evaluation of SMEDDS containing an anticancer peptide,linear LyP-1

Abstract

LyP-1 (CGNKRTRGC) is a nine amino acid peptide that shows high specificity for tumor lymphatics. The aim of this study was to develop lipid-based formulations containing the linear form of LyP-1 for lymphatic targeting. Self-microemulsifying drug delivery systems (SMEDDS) were designed for the delivery of linear LyP-1 by itself and as a solid dispersion (SD). Formulations were characterized in terms of physical stability, pH, morphological properties, droplet size distribution and zeta potential. Thermodynamically stable microemulsions were obtained with an average droplet size around 20?nm and zeta potential near neutrality. Cytotoxicity studies of blank and peptide-containing SMEDDS were carried out on Caco-2 cell line. Bioactivity studies of peptide-containing formulations were carried out on MDA-MB-231 breast cancer cell line. It was shown that blank and peptide-containing SMEDDS formulations were not cytotoxic to Caco-2 cell line. However, formulations containing the peptide and peptide SD led to a significant decrease in cell viability on breast cancer cells. It could be concluded that the SMEDDS formulations containing the linear LyP-1 were successfully developed for the lymphatic targeting of solid tumors in vitro.