Block copolymer micelles as seed in emulsion polymerization

The size of aggregates formed by poly(acrylic acid)-block-poly(methyl methacrylate) block copolymers was determined and the applicability of these block copolymers as stabilizers in emulsion polymerization was investigated. The analytical methods included transmission electron microscopy, light scattering, and analytical ultracentrifugation. Polymers with a hydrophilic poly(acrylic acid) block of equal or larger size than the hydrophobic poly(methyl methacrylate) block are efficient as stabilizers down to block copolymer-to-monomer ratios of less than 1 wt.-%. From the influence of the block copolymer-to-monomer ratio on the latex particle size, from the relation between the number of block copolymer molecules per latex particle and the aggregation number of the block copolymer micelles, and from fluorescence studies we conclude that micelles consisting of block copolymers with 35 or more hydrophobic MMA units act as a seed in the emulsion polymerization of acrylic and methacrylic monomers.     

Triblock Copolymers Based on Sucrose Methacrylate and Methyl Methacrylate: RAFT Polymerization and Self‐Assembly

ABA and BAB triblock amphiphilic copolymers based on sucrose methacrylate and methyl methacrylate are synthesized by sequential reversible addition–fragmentation chain transfer polymerization using S,S′‐bis(R,R′‐dimethyl‐R′′‐acetic acid)‐trithiocarbonate as a chain transfer agent. The copolymers present narrow molar mass dispersity, controlled molar mass and architecture as determined by gel permeation chromatography and ¹H and ¹³C nuclear magnetic resonance. The copolymers with molar and mass fractions of poly(sucrose methacrylate) block ranging from 1 to 22 mol% and 3 to 52 wt%, respectively, and different molar masses present characteristics of a surfactant such as self‐assembly. The self‐assembly of the triblock copolymers in water, N,N‐dimethylformamide (DMF), dichloromethane, tetrahydrofuran, or benzene results mostly in vesicles as confirmed by scanning electron microscopy images and small‐angle X‐ray of the dispersions. Moreover, the copolymers present the capability to stabilize aromatic molecules (Nile Red dye) and nonpolar solvents in an aqueous phase and polar ionic molecules (methylene blue) and water in a nonpolar medium, suggesting the potential for application in drug encapsulation, environmental remediation systems, and molecular extraction in liquid–liquid immiscible systems, for example. Films prepared by casting from copolymer solutions in DMF present a lamellar structure with the lamellar thickness varying according to the copolymer molar mass.     

Solution Self‐Assembly of Poly(ferrocenylphenylphosphine)‐block‐polydimethylsiloxane: Formation of Spherical Micelles with an Organometallic Poly(ferrocenylphenylphosphine) Core

The novel organometallic‐inorganic diblock copolymer, poly(ferrocenylphenylphosphine)‐block‐polydimethylsiloxane (PFP‐b‐PDMS), with narrow molecular weight distribution has been synthesized by living anionic polymerization through sequential monomer addition. These block copolymers self‐assemble into “star‐like” spherical micelles in hexane with a dense organometallic PFP core surrounded by a swollen corona of the PDMS chains. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) were used to characterize these micellar aggregates. It was found that the block copolymer micelles have a relatively narrow core size distribution, but an overall broader distribution of hydrodynamic size in hexane. Significantly, the preparation method of the micelle solution was also found to have an influence on the size and size distribution of the resulting micellar structures.     

Synthesis of Poly(ϵ‐caprolactone‐co‐methacrylic acid) Copolymer via Phosphazene‐Catalyzed Hybrid Copolymerization

Poly(?‐caprolactone‐co‐tert‐butyl methacrylate) (CL‐co‐BMA) random copolymer is synthesized via hybrid copolymerization with 1‐tert‐butyl‐4,4,4‐tris(dimethylamino)‐2,2‐bis[tris(dimethylamino)phophoranylidenamino]‐2Λ5,4Λ5‐catenadi(phosphazene) (t‐BuP₄) as the catalyst. The copolymer is hydrolyzed into poly(?‐caprolactone‐co‐methacrylic acid) (CL‐co‐MAA), a charged copolymer. Nuclear magnetic resonance, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis measurements indicate that cyclic ester and vinyl monomer form a random copolymer. The degradation of the copolymers has also been studied by use of quartz crystal microbalance with dissipation.     

Evaluation of triads in methyl methacrylate/methacrylic acid copolymers by 1H-NMR in different solvents and 13C-NMR

The probabilities of compositional-configurational triads in tactic and atactic methyl methacrylate/methacrylic acid copolymers are evaluated. After verification of the assignment of syndiotactic and isotactic triads in the ¹H-NMR spectra of tactic methyl methacrylate/methacrylic acid copolymers in three NMR solvents, the chemical shifts of the heterotactic triads are postulated by shift increments. The postulated assignment of the heterotactic triads is supported by comparison of the experimental ¹H-NMR peak intensities of atactic methyl methacrylate/pentadeuteromethacrylic acid copolymers and atactic pentadeuteromethyl methacrylate/methacrylic acid copolymers in three NMR solvents with calculated triad probabilities. The compositional and configurational parameters needed for the calculation of triad probabilities are determined. It is shown how the peak areas obtained from the two partially deuterated, atactic copolymers in different solvents may be combined to determine the probabilities of all compositional-configurational triads in atactic copolymers. Possibilities for the evaluation of triad probabilities from the ¹³C-NMR spectra of tactic and atactic methyl methacrylate/methacrylic acid copolymers are presented.     

Structure Formation of Binary Blends of Amphiphilic Block Copolymers in Solution and in Bulk

The self‐assembly and structure formation in binary blends of asymmetric polystyrene‐block‐poly(4‐vinylpyridine) diblock copolymers in different solvent systems and the bulk morphology of the blend films are studied by using dynamic light scattering, small‐angle X‐ray scattering, and transmission electron microscopy. In dilute solutions, the chains of pure diblock copolymers or binary blends of diblock copolymers having similar or different molecular weights remain as unimers, form common micelles in selective solvents or form unimers in coexistence with micelles in slightly selective solvents or solvent mixtures. The blends show mixing of the chemically similar blocks in the blend films and solutions at high concentrations. A single‐phase with common spherical morphology is formed in the blend films similar with the morphology of the individual components in the pure state. The characteristic length scale of the blends depends on the number average molecular weight following the typical scaling behavior of a strongly segregated block copolymer.

     

Micelle formation of poly(acrylic acid)-block-poly(methyl methacrylate) block copolymers in mixtures of water with organic solvents

The micelle formation of poly(acrylic acid)-block-poly(methyl methacrylate) (AA-MMA) block copolymers in mixtures of water with organic solvents was investigated by non-radiative energy transfer (NRET). In the case of block copolymers with 70 hydrophobic MMA units, which form strongly aggregated micelles in pure water, the addition of a non-selective organic solvent (methanol or 1,4-dioxane) induces a micelle-unimer transition within a relatively small range of solvent composition without significantly increasing the rate of chain exchange between micelles close to this transition region. The addition of 2 vol.-% dimethyl adipate (a solvent with chemical similarity to the PMMA block and only limited solubility in water) does not speed up the chain exchange in this system either. In contrast, this solvent promotes the aggregation of smaller block copolymers (20 or 40 MMA units) which are mainly present as single chains in pure water. In the case of the block copolymer with 40 MMA units the so formed micelles show a very slow chain exchange extending over many days. These observations prompt us to assume that the rate of the micelle-unimer exchange equilibrium is not kinetically hindered (i. e., determined by the T_g of the core material of the micelle) but controlled by a strong thermodynamic preference for the aggregated state.     

Aggregation and Crosslinking of Poly(N,N‐dimethylacrylamide)‐b‐pullulan Double Hydrophilic Block Copolymers

The self‐assembly of polymers is a major topic in current polymer chemistry. In here, the self‐assembly of a pullulan based double hydrophilic block copolymer, namely pullulan‐b‐poly(N,N‐dimethylacrylamide)‐co‐poly(diacetone acrylamide) (Pull‐b‐(PDMA‐co‐PDAAM)) is described. The hydrophilic block copolymer induces phase separation at high concentration in aqueous solution. Additionally, the block copolymer displays aggregates at lower concentration, which show a size dependence on concentration. In order to stabilize the aggregates, crosslinking via oxime formation is described, which enables preservation of aggregates at high dilution, in dialysis and in organic solvents. With adequate stability by crosslinking, double hydrophilic block copolymer (DHBC) aggregates open pathways for potential biomedical applications in the future.     

The Aggregation Behavior of Poly(ethylene oxide)‐Poly(methyl methacrylate) Diblock Copolymers in Organic Solvents

Poly(ethylene oxide)‐poly(methyl methacrylate) and poly(ethylene oxide)‐poly(deuteromethyl methacrylate) block copolymers have been prepared by group transfer polymerization of methyl methacrylate (MMA) and deuteromethyl methacrylate (MMA‐d₈), respectively, using macroinitiators containing poly(ethylene oxide) (PEO). Static and dynamic light scattering and surface tension measurements were used to study the aggregation behavior of PEO‐PMMA diblock copolymers in the solvents tetrahydrofuran (THF), acetone, chloroform, N,N‐dimethylformamide (DMF), 1,4‐dioxane and 2,2,2‐trifluoroethanol. The polymer chains are monomolecularly dissolved in 1,4‐dioxane, but in the other solvents, they form large aggregates. Solutions of partially deuterated and undeuterated PEO‐PMMA block copolymers in THF have been studied by small‐angle neutron scattering (SANS). Generally, large structures were found, which cannot be considered as micelles, but rather fluctuating structures. However, ¹H NMR measurements have shown that the block copolymers form polymolecular micelles in THF solution, but only when large amounts of water are present. The micelles consist of a PMMA core and a PEO shell.     

pH‐Sensitive Micelles Formed by Interchain Hydrogen Bonding of Poly(methacrylic acid)‐block‐Poly(ethylene oxide) Copolymers

pH‐sensitive micelles formed by interchain hydrogen bonding of poly(methacrylic acid)‐block‐poly(ethylene oxide) copolymers were prepared and investigated at pH < 5. Both and R_h of the micelles increase with decreasing pH of the solution, displaying an asymptotic tendency at low pH values. The observed micelles are well‐defined nanoparticles with narrow size distributions (polydispersity ΔR_h/R_h ≤ 0.05) comparable with regular diblock copolymer micelles. The CMCs occur slightly below c = 1 × 10^?4 g · mL^?1. The micelles are negatively charged and their time stability is lower than that of regular copolymer micelles based purely on hydrophobic interactions.

     

Folate‐Conjugated Poly(N‐(2‐hydroxypropyl) methacrylamide)‐block‐Poly(benzyl methacrylate): Synthesis,Self‐Assembly,and Drug Release

Well‐defined amphiphilic diblock copolymers of poly(N‐(2‐hydroxypropyl)methacrylamide)‐block‐poly(benzyl methacrylate) (PHPMA‐b‐PBnMA) are synthesized using reversible addition–fragmentation chain transfer polymerization. The terminal dithiobenzoate groups are converted into carboxylic acids. The copolymers self‐assemble into micelles with a PBnMA core and PHPMA shell. Their mean size is <30 nm, and can be regulated by the length of the hydrophilic chain. The compatibility between the hydrophobic segment and the drug doxorubicin (DOX) affords more interaction of the cores with DOX. Fluorescence spectra are used to determine the critical micelle concentration of the folate‐conjugated amphiphilic block copolymer. Dynamic light scattering measurements reveal the stability of the micelles with or without DOX. Drug release experiments show that the DOX‐loaded micelles are stable under simulated circulation conditions and the DOX can be quickly released under acidic endosome pH.     

One-Pot/Simultaneous Synthesis of PHPMA-G-PLA Copolymers via Metal-Free Rop/Raft Polymerization and their Self-Assembly from Micelles to Thermoresponsive Vesicles

The present article reports a simple and straightforward approach to access thermoresponsive graft copolymers based on lactide (LA) and a methacrylic monomer, 2-hydroxypropyl methacrylate (HPMA), using a synthesized carboxy-functionalized trithiocarbonate-based chain transfer agent. One protocol involves a metal-free simultaneous synthesis through a combination of reversible addition-fragmentation chain transfer polymerization and organic acid-catalyzed ring-opening polymerization, which follows first-order kinetics. The resulting copolymers with a controlled structure exhibit remarkably narrow molecular weight distributions (Р< 1.10). Within this framework, the self-assembly of PHPMA-g-PLA graft copolymers (GCs) into nanoparticles (NPs) is demonstrated at concentrations of 0.2 and 0.5 wt.%, respectively. The displacement method, based on the rapid injection of the organic solvent (acetone) into an aqueous medium under vigorous stirring, produces spherical NPs such as micelles, vesicles, or non-spherical “lumpy rods”. The presence of a pseudo-thermoresponsive segment (PHPMA) in GCs facilitates stimulus-responsive self-assembly behavior. Well-defined spherical NPs—primarily vesicles of substantial size—develop upon heating above the glass transition temperature (T_g ≈35–36 °C) of the GCs in an acetone–water (80/20 wt.%) mixture. Last, specific interactions between the obtained PHPMA-g-PLA nano-objects and blood proteins in human plasma are studied using isothermal calorimetry.     

Sharp‐pH‐Sensitive Amphiphilic Polypeptide Micelles with Adjustable Triggered pHs by Salts via the Hofmeister Effect

Supramolecular self‐assembly of polymeric molecules for sharp‐pH‐sensitive (SPS) nanoparticles is an especially important application in biology. Here, amphiphilic polypeptide copolymers are synthesized and spontaneously assembled to micelles in aqueous solution, and protonation of the tertiary amine groups in the side‐chain of the copolymer under weak acid causes the micelle disassembly, which is sharp‐pH‐sensitive, and the responsive pHs can be adjusted by adding salts. Size and morphologic change of the polymeric micelles are characterized by means of dynamic lighting scattering, transmission electron microscope (TEM), and atomic force microscope (AFM) in sequential pH alterations. It is found that the Hofmeister ions play a key factor in controlling the subtle interaction of different noncovalent bonds among polypeptide molecules during their self‐assembly or disassembly. The physical property exploration of the SPS micelles may provide a new chance for the development of dynamic, complex nanostructures in various pH‐responsive applications.     

Spherical Compound Micelles with Lamellar Stripes Self‐Assembled from Star Liquid Crystalline Diblock Copolymers in Solution

Detailed investigations on the self‐assembly of amphiphilic star block copolymers composed of three‐arm poly(ethylene oxide) (PEO) and poly(methacrylate) (PMAAz) with an azobenzene side chain (denoted as 3PEO‐b‐PMAAz) into stable spherical aggregates with clear lamellar stripes in solution are demonstrated. Four block copolymers, 3PEO₁₂‐b‐PMA(Az)₃₃, 3PEO₂₂‐b‐PMA(Az)₃₁, 3PEO₂₂‐b‐PMA(Az)₆₂, and linear PEO₆₈‐b‐PMA(Az)₃₁, are synthesized. The liquid crystalline properties of the block copolymers are studied by differential scanning calorimetry, polarized optical microscopy techniques, and wide‐angle X‐ray diffraction. The morphologies of the compound micelles self‐assembled in tetrahydrofuran (THF)/water mixtures are observed by means of transmission electron microscopy and scanning electron microscopy. The size of the spherical micelles is influenced by the self‐assembly conditions and the lengths of two blocks. The well‐defined three‐arm architecture of the hydrophilic blocks is a key structural element to the formation of stable spherical compound micelles. The micelle surface integrity is affected by the lengths of PEO blocks. The lamellar stripes are clearly observed on these micelles. This work provides a promising strategy to prepare functional stable spherical compound micelles self‐assembled by amphiphilic block copolymers in solution.     

Self‐Assembly of Carbon Nanotubes Modified by Amphiphilic Block Polymers in Selective Solvent

Block copolymers of polystyrene and poly(tert‐butyl methyacrylate) were prepared by ATRP. Halogen atoms at the chain ends were transformed into azide groups to obtain  N₃ terminated block copolymers, which were connected to the surface of multi‐walled carbon nanotubes (MWNTs) by reacting  N₃ with MWNT's surface. Amphiphilic diblock copolymer modified MWNTs were obtained after PtBMA blocks were hydrolyzed to polymethyacrylic acid (PMAA). Results showed that the amphiphilic diblock copolymer was grafted onto MWNTs by covalent bonds. TEM showed that they formed self‐assembly structures by hydrophilic/hydrophobic interaction in good solvents. As the block length of PMAA increased, the self‐assembly structures of amphiphilic MWNTs became increasingly ordered and uniform.

     

Synthesis of Well-Defined Block Copolymers of Hyperbranched Polyamide and Polystyrene and Their Micelle-to-Vesicle Transformation in Organic Solvents

Well-defined block copolymers consisting of hyperbranched polyamide (HBPA) and polystyrene (PSt) are synthesized, and their self-assembled structures in solutions are investigated. Atom transfer radical polymerization (ATRP) of styrene initiated from an HBPA macroinitiator, prepared by the chain-growth condensation polymerization of an AB₂ monomer, followed by introduction of an ATRP initiator unit at the focal point, gives the desired block copolymers, PSt-b-HBPAs, with well-defined molecular weight and narrow molecular weight distribution. The block copolymer (PSt/HBPA = 84/16) undergoes self-assembly in toluene to form spherical micelles (≈10–20 nm), but upon addition of methanol to the toluene solution (toluene/methanol = 0.97/0.03), the morphology changes to vesicles. Further addition of methanol (toluene/methanol = 0.90/0.10) leads to an increase in vesicle size (200–300 nm) and the morphology further transforms from vesicles to large aggregates (>100 nm) at toluene/methanol = 0.80/0.20. In the case of PSt-b-HBPA with shorter PSt segments (PSt/HBPA = 76/24 and 60/40), spherical micelles are formed in toluene, but the micelle morphology remains unchanged when 10 wt% methanol is added, though large aggregates (>100 nm) are still formed in toluene/methanol = 0.80/0.20. Interestingly, the morphological transformations of linear/hyperbranched block copolymers are different from those of their double linear block copolymer counterparts.     

Double Hydrophilic Block Copolymer Self‐Assembly in Aqueous Solution

Self‐assembly of double hydrophilic block copolymers (DHBCs) in water is an emerging area of research. The self‐assembly process can be derived from aqueous two‐phase systems that are composed of hydrophilic homopolymers at elevated concentration. Consecutively, DHBCs form self‐assembled structures like micelles, vesicles, or particles at high concentrations in water and without the use of external triggers that would change solubility of individual blocks. Careful choice of the two hydrophilic blocks and design of the polymer structure allows formation of self‐assembled structures with high efficiency. The present contribution highlights recent research in the area of DHBC self‐assembly, including the polymer types employed and strategies for crosslinking of the self‐assembled structures. Moreover, an overview of aqueous multiphase systems and theoretical considerations of DHBC self‐assembly are presented, as well as an outlook regarding potential future applications in areas such as the biomedical field.     

Complex formation of polyampholyte with proton-accepting polymers through hydrogen bonding

Polyampholytes, copolymers of methacrylic acid and 2-dimethylaminoethyl methacrylate [C(MA-AM)x] of various composition, were synthesized. Their isoelectric points (pI) are in the range 5 < pH < 7. Undissociated methacrylic acid residues in the copolymers can interact with ether oxygens of poly(ethylene glycol) (PEG) and ketone groups of poly(N-vinyl-2-pyrrolidone) (PVPo) in the acidic pH region through hydrogen bonding. However, only copolymers having more than about 60 mol-% of methacrylic acid residues form complexes with PVPo and high molecular weight PEG. The composition of the obtained complexes is 1:1 (mole ratio of methacrylic acid residues of the copolymer to repeating units of PVPo and PEG).     

Aggregation Behavior of Polystyrene/Poly(acrylic acid) Heteroarm Star Copolymers in 1,4‐Dioxane and Aqueous Media

Ionic heteroarm star copolymers bearing polystyrene (PS) and poly(acrylic acid) (PAA) arms (PS_nPAA_n) were prepared by quantitative hydrolysis of the poly(tert‐butyl acrylate) (PtBA) arms of the corresponding PS_nPtBA_n star copolymer. The aggregation properties of these copolymers were studied in various solvents. In 1,4‐dioxane PS₁₂PAA₁₂ (with nearly symmetrical PS and PAA arms) forms reverse micelles of low aggregation number (N_agg) and spherical morphology. In an 80 : 20 (v/v) 1,4‐dioxane/water mixture these micelles are transformed to regular micelles with an unexpectedly high N_agg and an elongated rod‐like structure. An abnormal behavior was observed in aqueous solutions of charged PS₂₄PANa₂₄ (with asymmetrical PS and PAA arms, W_PS = 19 wt.‐%) at low concentrations. A non‐equilibrium physical gel is formed, characterized by a very high viscosity and an elastic response upon oscillatory shearing.