Synthesis of 6‐chloro‐3‐((2‐(S)‐azetidinyl)methoxy)‐5‐(2‐[18F]fluoropyridin‐4‐yl)pyridine ([18F]NIDA 522131), a novel potential radioligand for studying extrathalamic nicotinic acetylcholine receptors by PET

6‐Chloro‐3‐((2‐(S)‐azetidinyl)methoxy)‐5‐(2‐[¹⁸F]fluoropyridin‐4‐yl)pyridine ([¹⁸F]NIDA 522131), a potential radioligand for studying extrathalamic nicotinic acetylcholine receptors by positron‐emission tomography, was synthesized via no‐carrier‐added nucleophilic [¹⁸F]fluorination of 6‐chloro‐3‐((1‐(tert‐butoxycarbonyl)‐2‐(S)‐azetidinyl)methoxy)‐5‐(2‐iodopyridin‐4‐yl)vinyl)pyridine, followed by acidic deprotection. The overall radiochemical yield of the radiosynthesis was 4–8% (non‐decay‐corrected), the specific radioactivity was in the range of 167–335 GBq/µmol (4500–9000 mCi/µmol) and the radiochemical purity was greater than 99%. Preparation of [¹⁸F]NIDA522131 via corresponding bromo‐derivative 2 is also described. Copyright © 2004 John Wiley & Sons, Ltd.     

Efficient synthesis of 6‐chloro‐3‐((2‐(S)‐azetidinyl)methoxy)‐5‐((E)‐2‐(2‐[18F]fluoropyridin‐4‐yl)vinyl)pyridine ([18F]NIDA 52289), a very high affinity radioligand for nicotinic acetylcholine receptors

6‐Chloro‐3‐((2‐(S)‐azetidinyl)methoxy)‐5‐((E)‐2‐(2‐[¹⁸F]fluoropyridin‐4‐yl)vinyl)pyridine ([¹⁸F]NIDA 52289), a very high affinity radioligand for studying nicotinic acetylcholine receptors (nAChRs) by positron‐emission tomography, was synthesized through Kryptofix 222 assisted no‐carrier‐added nucleophilic [¹⁸F]fluorination of 6‐chloro‐3‐((1‐(tert‐butoxycarbonyl)‐2‐(S)‐azetidinyl)methoxy)‐5‐((E)‐2‐(2‐bromopyridin‐4‐yl)vinyl)pyridine, followed by acidic deprotection. The overall radiochemical yield of the radiosynthesis was 10% (non‐decay‐corrected), the specific radioactivity was in the range of 93–326 GBq/µmol (2.5–8.8 mCi/µmol) and the radiochemical purity was greater than 99%. Copyright © 2004 John Wiley & Sons, Ltd.     

Radiosynthesis of 3‐[18F]fluoropropyl and 4‐[18F]fluorobenzyl triarylphosphonium ions

3‐[¹⁸F]Fluoropropyl‐, 4‐[¹⁸F]fluorobenzyl‐triphenylphosphonium and 4‐[¹⁸F]fluorobenzyltris‐4‐dimethylaminophenylphosphonium cations were synthesized in multi‐step reactions from no carrier added (nca) [¹⁸F]fluoride. The time for synthesis, purification, and formulation was 56, 82, and 79 min with an average radiochemical yield of 12, 6 and 15%, respectively (not corrected for decay). The average specific radioactivity for the three radiolabeled compounds was 14.9 GB q/µmole (403 mCi/µmole) at end of synthesis (EOS). Copyright © 2004 John Wiley & Sons, Ltd.     

Regioselective F‐18 radiolabeling of AM694, a CB1 cannabinoid receptor ligand

[¹⁸F]AM694, [1‐(5‐[¹⁸F]fluoropentyl)‐1H‐indol‐3‐yl]‐(2‐iodophenyl)methanone, 1b , a potential radiotracer for imaging of cerebral cannabinoid receptor (CB₁), has been synthesized by no‐carrier‐added regioselective radiofluorination of the corresponding tosylate. [¹⁸F]AM694 was obtained in 20% radiochemical yield (non‐decay‐corrected) with a specific activity of 14 500 mCi/µmol, a radiochemical purity of > 99%, and a chemical purity of 95.5%. Copyright © 2003 John Wiley & Sons, Ltd.     

Automated radiosynthesis of no‐carrier‐added 4‐[18F]fluoroiodobenzene: a versatile building block in 18F radiochemistry

4‐[¹⁸F]Fluoroiodobenzene ([¹⁸F]FIB) is a versatile building block in ¹⁸F radiochemistry used in various transition metal‐mediated C–C and C–N cross‐coupling reactions and [¹⁸F]fluoroarylation reactions. Various synthesis routes have been described for the preparation of [¹⁸F]FIB. However, to date, no automated synthesis of [¹⁸F]FIB has been reported to allow access to larger amounts of [¹⁸F]FIB in high radiochemical and chemical purity. Herein, we describe an automated synthesis of no‐carrier‐added [¹⁸F]FIB on a GE TRACERlab? FX automated synthesis unit starting from commercially available (4‐iodophenyl)diphenylsulfonium triflate as the labelling precursor. [¹⁸F]FIB was prepared in high radiochemical yields of 89 ± 10% (decay‐corrected, n = 7) within 60 min, including HPLC purification. The radiochemical purity exceeded 95%, and specific activity was greater than 40 GBq/µmol. Typically, from an experiment, 6.4 GBq of [¹⁸F]FIB could be obtained starting from 10.4 GBq of [¹⁸F]fluoride. Copyright © 2013 John Wiley & Sons, Ltd.     

Fully automated synthesis and purification of 4‐(2′‐methoxyphenyl)‐1‐[2′‐(N‐2″‐pyridinyl)‐p‐[18F]fluorobenzamido]ethylpiperazine

We have developed an efficient synthesis method for the rapid and high‐yield automated synthesis of 4‐(2′‐methoxyphenyl)‐1‐[2′‐(N‐2″‐pyridinyl)‐p‐[¹⁸F]fluorobenzamido]ethylpiperazine (p‐[¹⁸F]MPPF). No‐carrier‐added [¹⁸F]F^? was trapped on a small QMA cartridge and eluted with 70% MeCN(aq) (0.4 mL) containing Kryptofix 222 (2.3 mg) and K₂CO₃ (0.7 mg). The nucleophilic [¹⁸F]fluorination was performed with 3 mg of the nitro‐precursor in DMSO (0.4 mL) at 190 °C for 20 min, followed by the preparative HPLC purification (column: COSMOSIL Cholester, Nacalai Tesque, Kyoto, Japan; mobile phase: MeCN/25 mm AcONH₄/AcOH = 200/300/0.15; flow rate: 6.0 mL/min) to afford p‐[¹⁸F]MPPF (retention time = 9.5 min). p‐[¹⁸F]MPPF was obtained automatically with a radiochemical yield of 38.6 ± 5.0% (decay corrected, n = 5), a specific activity of 214.3 ± 21.1 GBq/µmol, and a radiochemical purity of >99% within a total synthesis time of about 55 min. Copyright © 2012 John Wiley & Sons, Ltd.     

Automated radiosynthesis of [18F]SPA‐RQ for imaging human brain NK1 receptors with PET

[¹⁸F]SPA‐RQ is an effective radioligand for imaging brain neurokinin type‐1 (NK₁) receptors in clinical research and drug discovery with positron emission tomography. For the automated regular production of [¹⁸F]SPA‐RQ for clinical use in the USA under an IND we chose to use a modified commercial synthesis module (TRACERlab FX_F‐N; GE Medical Systems) with an auxiliary custom‐made robotic cooling–heating reactor, after evaluating several alternative radiosynthesis conditions. The automated radiosynthesis and its quality control are described here. [¹⁸F]SPA‐RQ was regularly obtained within 150 min from the start of radiosynthesis in high radiochemical purity (>99%) and chemical purity and with an overall decay‐corrected radiochemical yield of 15±2% (mean±S.D.; n=10) from cyclotron‐produced [¹⁸F]fluoride ion. The specific radioactivity of [¹⁸F]SPA‐RQ at the end of synthesis ranged from 644 to 2140 mCi/µmol (23.8–79.2 GBq/µmol). Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of N‐(3‐[18F]Fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐iodophenyl)nortropane ([18F]FP‐β‐CIT)

N‐(3‐[¹⁸F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐iodophenyl)nortropane ([¹⁸F]FP‐β‐CIT) was synthesized in a two‐step reaction sequence. In the first reaction, 1‐bromo‐3‐(nitrobenzene‐4‐sulfonyloxy)‐propane was fluorinated with no‐carrier‐added fluorine‐18. The resulting product, 1‐bromo‐3‐[¹⁸F]‐fluoropropane, was distilled into a cooled reaction vessel containing 2β‐carbomethoxy‐3β‐(4‐iodophenyl)‐nortropane, diisopropylethylamine and potassium iodide. After 30 min, the reaction mixture was subjected to a preparative HPLC purification. The product, [¹⁸F]FP‐β‐CIT, was isolated from the HPLC eluent with solid‐phase extraction and formulated to yield an isotonic, pyrogen‐free and sterile solution of [¹⁸F]FP‐β‐CIT. The overall decay‐corrected radiochemical yield was 25 ± 5%. Radiochemical purity was > 98% and the specific activity was 94 ± 50 GBq/µmol at the end of synthesis. Copyright © 2006 John Wiley & Sons, Ltd.     

Simplified synthesis of N‐(3‐[18F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐fluorophenyl)nortropane ([18F]β‐CFT‐FP) using [18F]fluoropropyl tosylate as the labelling reagent

A synthesis method has been developed for the labelling of N‐(3‐[¹⁸F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐fluorophenyl)nortropane ([¹⁸F]β‐CFT‐FP), a potential radioligand for visualization of the dopamine transporters by positron emission tomography. The two‐step synthesis includes preparation of [¹⁸F]fluoropropyl tosylate and its use without purification in the fluoroalkylation of 2β‐carbomethoxy‐3β‐(4‐fluorophenyl)nortropane (nor‐β‐CFT). The final product is purified by HPLC. Optimization of the two synthesis steps resulted in a greater than 30% radiochemical yield of [¹⁸F]β‐CFT‐FP (decay corrected to end of bombardment). The synthesis time including HPLC‐purification was approximately 90 min. The radiochemical purity of the final product was higher than 99% and the specific radioactivity at the end of synthesis was typically 20 GBq/µmol. In comparison to alkylation by [¹⁸F]fluoropropyl bromide, the procedure described here results in an improved overall radiochemical yield of [¹⁸F]β‐CFT‐FP in a shorter time. Copyright © 2005 John Wiley & Sons, Ltd.     

Automated production at the curie level of no‐carrier‐added 6‐[18F]fluoro‐ l‐dopa and 2‐[18F]fluoro‐ l‐tyrosine on a FASTlab synthesizer

An efficient, fully automated, enantioselective multi‐step synthesis of no‐carrier‐added (nca) 6‐[¹⁸F]fluoro‐L‐dopa ([¹⁸F]FDOPA) and 2‐[¹⁸F]fluoro‐L‐tyrosine ([¹⁸F]FTYR) on a GE FASTlab synthesizer in conjunction with an additional high‐ performance liquid chromatography (HPLC) purification has been developed. A PTC (phase‐transfer catalyst) strategy was used to synthesize these two important radiopharmaceuticals. According to recent chemistry improvements, automation of the whole process was implemented in a commercially available GE FASTlab module, with slight hardware modification using single use cassettes and stand‐alone HPLC. [¹⁸F]FDOPA and [¹⁸F]FTYR were produced in 36.3 ± 3.0 % (n = 8) and 50.5 ± 2.7 % (n = 10) FASTlab radiochemical yield (decay corrected). The automated radiosynthesis on the FASTlab module requires about 52 min. Total synthesis time including HPLC purification and formulation was about 62 min. Enantiomeric excesses for these two aromatic amino acids were always >95 %, and the specific activity of was >740 GBq/µmol. This automated synthesis provides high amount of [¹⁸F]FDOPA and [¹⁸F]FTYR (>37 GBq end of synthesis (EOS)). The process, fully adaptable for reliable production across multiple PET sites, could be readily implemented into a clinical good manufacturing process (GMP) environment.     

4‐[18F]fluorophenyl ureas via carbamate‐4‐nitrophenyl esters and 4‐[18F]fluoroaniline

Four different no carrier added (n.c.a.) 4‐[¹⁸F]fluorophenylurea derivatives are synthesized as model compounds via two alternative routes. In both cases carbamate‐4‐nitrophenylesters are used as intermediates. Either n.c.a. 4‐[¹⁸F]fluoroaniline reacts with carbamates of several amines, or the carbamate of n.c.a. 4‐[¹⁸F]fluoroaniline is formed at first and an amine is added subsequently to yield the urea derivative. The choice of the appropriate way of reaction depends on the possibilities of precursor synthesis. The radiochemical yields reach up to 80% after 50 min of synthesis time while no radiochemical by‐products can be determined. These high yields were possible due to an optimized preparation of n.c.a. 4‐[¹⁸F]fluoroaniline with a radiochemical yield of up to 90%. From the various ways of its radiosynthesis, the substitution with n.c.a. [¹⁸F]fluoride on dinitrobenzene is chosen, using phosphorous acid and palladium black for reduction of the second nitro group. Copyright © 2006 John Wiley & Sons, Ltd.     

Radiosynthesis of 2‐exo‐(2′‐[18F]Fluoro‐3′‐(4‐fluorophenyl)‐pyridin‐5′‐yl)‐7‐azabicyclo[2.2.1]heptane ([18F]F2PhEP), a potent epibatidine‐based radioligand for nicotinic acetylcholine receptor PET imaging

2‐exo‐(2′‐Fluoro‐3′‐(4‐fluorophenyl)‐pyridin‐5′‐yl)‐7‐azabicyclo[2.2.1]heptane (F₂PhEP), a novel, epibatidine‐based, α4β2‐selective nicotinic acetylcholine receptor antagonist of low toxicity, as well as the corresponding N‐Boc‐protected chloro‐ and bromo derivatives as precursors for labelling with fluorine‐18 were synthesized from 7‐tert‐butoxycarbonyl‐7‐azabicyclo[2.2.1]hept‐2‐ene in 13, 19 and 8% overall yield, respectively. [¹⁸F]F₂PhEP was prepared in 8–9% overall yield (non‐decay‐corrected) using 1 mg of the bromo derivative in the following two‐step radiochemical process: (1) no‐carrier‐added nucleophilic heteroaromatic ortho‐radiofluorination with the activated K[¹⁸F]F‐Kryptofix^®₂₂₂ complex in DMSO using microwave activation at 250 W for 90 s, followed by (2) quantitative TFA‐induced removal of the N‐Boc protective group. Radiochemically pure (>95%) [¹⁸F]F₂PhEP (1.48–1.66 GBq, 74–148 GBq/µmol) was obtained after semi‐preparative HPLC (Symmetry^® C18, eluent aqueous 0.05 M NaH₂PO₄ CH₃CN: 78/22 (v:v)) in 75–80 min starting from an 18.5 GBq aliquot of a cyclotron‐produced [¹⁸F]fluoride production batch. Copyright © 2006 John Wiley & Sons, Ltd.     

A general synthesis of 2′‐deoxy‐2′‐[18F]fluoro‐1‐β‐D‐arabinofuranosyluracil and its 5‐substituted nucleosides

Several 2′‐deoxy‐2′‐[¹⁸F]fluoro‐1‐β‐D‐arabinofuranosyluracil derivatives have been synthesized. Coupling of 1‐bromo‐2‐deoxy‐2‐[¹⁸F]fluoro‐3,5‐di‐O‐benzoyl‐α‐D‐arabinofuranose 2 with protected uracil derivatives 3a–e followed by hydrolysis and high‐performance liquid chromatography purification produced the radiolabeled nucleosides 4a–e in 15–30% yield (d. c.), >99% radiochemical purity and 55.5–103.6 GBq/µmol specific activities. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of [18F]‐labeled 2′‐deoxy‐2′‐fluoro‐5‐methyl‐1‐β‐D‐arabinofuranosyluracil ([18F]‐FMAU)

Synthesis of 2′‐deoxy‐2′‐[¹⁸F]fluoro‐5‐methyl‐1‐β‐D‐arabinofuranosyluracil ([¹⁸F]‐FMAU) is reported. 2‐Deoxy‐2‐[¹⁸F]fluoro‐1,3,5‐tri‐O‐benzoyl‐α‐D‐arabinofuranose 2 was prepared by the reaction of the respective triflate 1 with tetrabutylammonium[¹⁸F]fluoride. The fluorosugar 2 was converted to its 1‐bromo‐derivative 3 and coupled with protected thymine 4 . The crude product mixture ( 5a and 5b ) was hydrolyzed in base and purified by HPLC to obtain the radiolabeled FMAU 6a . The radiochemical yield of 6a was 20–30% decay corrected (d.c.) in four steps with an average of 25% in four runs. Radiochemical purity was >99% and average specific activity was 2300 mCi/μmol at the end of synthesis (EOS). The synthesis time was 3.5–4.0 h from the end of bombardment (EOB). Copyright © 2002 John Wiley & Sons, Ltd.     

One‐step radiosynthesis of 4‐[18F]flouro‐3‐nitro‐N‐2‐propyn‐1‐yl‐benzamide ([18F]FNPB): a new stable aromatic porosthetic group for efficient labeling of peptides with fluorine‐18

4‐[¹⁸F]flouro‐3‐nitro‐N‐2‐propyn‐1‐yl‐benzamide ([¹⁸F]FNPB) was developed as a new stable aromatic prosthetic group for more efficient click labeling of peptides. A new aromatic precursor 3,4‐dinitro‐N‐2‐propyn‐1‐yl‐benzamide was radiofluorinated using [¹⁸F]KF/K2.2.2 followed by HPLC purification to obtain the desired product [¹⁸F]FNPB. [¹⁸F]FNPB was synthesized with a 58% radiochemical yield, a specific activity > 350 GBq/µmol, and radiochemical purity was exceeded 98% in 40 min. The in vitro stability studies showed no detectable radiodefluorination over 2 h in mouse plasma. The click labeling yield of three different peptides with [¹⁸F]FNPB were all above 87%. The in vitro study suggests that [¹⁸F]FNPB may be stable in vivo and could have general application in labeling peptides with high radiochemical yield for positron emission tomography applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of an 18F‐labeled cyclin‐dependent kinase‐2 inhibitor

The radiosynthesis of N‐(5‐(((5‐(tert‐butyl)oxazol‐2‐yl)methyl)thio)thiazol‐2‐yl)‐4‐[¹⁸F]fluoro‐benzamide [¹⁸F]2 as a potential radiotracer for molecular imaging of cyclin‐dependent kinase‐2 (CDK‐2) expression in vivo by positron emission tomography is described. Two different synthesis routes were envisaged. The first approach followed direct radiofluorination of respective nitro‐ and trimethylammonium substituted benzamides as labeling precursors with no‐carrier‐added (n.c.a.) [¹⁸F]fluoride. A second synthesis route was based on the acylation reaction of 2‐aminothiazole derivative with labeling agent [¹⁸F]SFB. Direct radiofluorination afforded ¹⁸ F‐labeled CDK‐2 inhibitor in very low yields of 1%–3%, whereas acylation reaction with [¹⁸F]SFB gave ¹⁸ F‐labeled CDK‐2 inhibitor [¹⁸ F]2 in high yields of up to 85% based upon [¹⁸ F]SFB during the optimization experiments. Large scale preparation afforded radiotracer [¹⁸ F]2 in isolated radiochemical yields of 37%–44% (n = 3, decay‐corrected) after HPLC purification within 75 min based upon [¹⁸ F]SFB. This corresponds to a decay‐corrected radiochemical yield of 13%–16% based upon [¹⁸F]fluoride. The radiochemical purity exceeded 95% and the specific activity was determined to be 20 GBq/µmol. Copyright © 2011 John Wiley & Sons, Ltd.     

[18F]FPyKYNE,a fluoropyridine‐based alkyne reagent designed for the fluorine‐18 labelling of macromolecules using click chemistry

FPyKYNE (2‐fluoro‐3‐pent‐4‐yn‐1‐yloxypyridine) is a novel fluoropyridine‐based structure, designed for the fluorine‐18 labelling of macromolecules using copper‐catalysed Huisgen 1,3‐dipolar cycloaddition (click chemistry). FPyKYNE (non‐labelled as reference), as well as the 2‐bromo, 2‐nitro and 2‐trimethylammonium analogues (as precursors for labelling with fluorine‐18), was synthesized in 44, 95, 60 and 41%, respectively, from commercially available 5‐chloropent‐1‐yne and the appropriate 2‐substituted‐3‐hydroxypyridines. [¹⁸F]FPyKYNE was synthesized in one single radiochemical step by reaction of no‐carrier‐added K[¹⁸F]F‐Kryptofix^®222 (DMSO, 165°C, 3–5 min) followed by C‐18 SepPak cartridge pre‐purification and finally semi‐preparative HPLC purification on a Hewlett Packard SiO₂ Zorbax^® Rx‐SIL. Using the 2‐nitropyridine or the pyridin‐2‐yltrimethylammonium trifluoromethanesulphonate precursor for labelling (30 and 10 µmol, respectively), incorporation yields up to 90% were observed and 7.0–8.9 GBq (190–240 mCi) of [¹⁸F]FPyKYNE ([¹⁸F]‐1) could be isolated within 60–70 min (HPLC purification included), starting from a 37.0 GBq (1.0 Ci) [¹⁸F]fluoride batch (overall decay‐corrected and isolated yields: 30–35%). Copyright © 2008 John Wiley & Sons, Ltd.     

Radiosynthesis of N5‐[18F]fluoroacetylornithine (N5‐[18F]FAO) for PET imaging of ornithine decarboxylase (ODC) in malignant tumors

Polyamines are naturally occurring polycations derived from amino acids via decarboxylation by ornithine decarboxylase (ODC). Ornithine is a substrate for ODC; decarboxylation of ornithine is inhibited by difluoromethylornithine (DFMO) and its derivatives. Polyamine contents are increased in many epithelial cancers, including breast cancer, melanoma, and prostate cancer. In order to image and measure the levels of ODC expression in malignant tumors, we have synthesized a derivative of ornithine, N⁵‐[¹⁸F]fluoroacetylornithine (N⁵‐[¹⁸F]FAO), for use in positron emission tomography. The precursor compound N²‐Boc‐N⁵‐bromoacetylornithine‐t‐butyl ester 2 was synthesized from 5‐amino‐2‐(tert‐butoxycarbonylamino)pentanoic acid, which was reacted with bromoacetyl chloride followed by esterification with tert‐butyl‐2,2,2‐trichloroacetamidate. Fluorination of the precursor produced a fluoro‐derivative, which was hydrolyzed in acid to obtain the desired compound, N⁵‐fluoroacetylornithine. The radiosynthesis of N⁵‐[¹⁸F]FAO was accomplished by radiofluorination of 2 with n‐Bu₄N[¹⁸F], followed by high‐performance liquid chromatography (HPLC) purification and then by acid hydrolysis. The radiochemical yield was 6–10% (decay corrected) with an average of 8% (n=10) at the end of synthesis. The radiochemical purity was >99%, and specific activity was >1500 mCi/µmol. The synthesis time was 95–100 min from the end of bombardment. Copyright © 2010 John Wiley & Sons, Ltd.     

A fully automated synthesis of [18F]‐FEAU and [18F]‐FMAU using a novel dual reactor radiosynthesis module

2′‐Deoxy‐2′‐[¹⁸F]fluoro‐5‐substituted‐1‐β‐D ‐arabinofuranosyluracils, including 2′‐deoxy‐2′‐[¹⁸F]fluoro‐5‐methyl‐1‐β‐D ‐arabinofuranosyluracil [¹⁸F]FMAU and [¹⁸F]FEAU are established radiolabeled probes to monitor cellular proliferation and herpes simplex virus type 1 thymidine kinase (HSV1‐tk) reporter gene expression with positron emission tomography. For clinical applications, a fully automated CGMP‐compliant radiosynthesis is necessary for production of these probes. However, due to multiple steps in the synthesis, no such automated synthetic protocols have been developed. We report here a fully automated synthesis of [¹⁸F]‐FEAU and [¹⁸F]‐FMAU on a prototype dual reactor module TRACERlab FX FN. The synthesis was performed by using a computer‐programmed standard operating procedure, and the product was purified on a semipreparative high‐performance liquid chromatography (HPLC) integrated with the synthesis module using 12% EtOH in 50 mM Na₂HPO₄. Finally, the percentage of alcohol was adjusted to 7% by adding Na₂HPO₄ and filtered through a Millipore filter to make dose for human. The radiochemical yield on the fluorination was 40±10% (n=10), and the overall yields were 4±1% (d. c.), from the end of the bombardment; [¹⁸F]FEAU (n=7) and [¹⁸F]FMAU (n=3). The radiochemical purity was >99%, specific activity was 1200–1300 mCi/µmol. The synthesis time was 2.5 h. This automated synthesis should be suitable for production of [¹⁸F]FIAU, [¹⁸F]FFAU, [¹⁸F]FCAU, [¹⁸F]FBAU and other 5‐substitued thymidine analogues. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of N‐(piperidin‐1‐yl)‐5‐(4‐methoxyphenyl)‐1‐(2‐chlorophenyl)‐4‐[18F]fluoro‐1H‐pyrazole‐3‐carboxamide by nucleophilic [18F] fluorination: a PET radiotracer for studying CB1 cannabinoid receptors

The feasibility of nucleophilic displacement of bromide in the 4‐bromopyrazole ring with [¹⁸F]fluoride has been demonstrated by the synthesis of two radiolabeled compounds: N‐(piperidin‐1‐yl)‐5‐(4‐methoxyphenyl)‐1‐(2‐chlorophenyl)‐4‐[¹⁸F]fluoro‐1H‐pyrazole‐3‐carboxamide, ([¹⁸F] NIDA‐42033) 1b and 1‐(2‐chlorophenyl)‐4‐[¹⁸F]fluoro‐5‐(4‐methoxyphenyl)‐1H‐pyrazole‐3‐carboxylic acid, ethyl ester 4 . The radiochemical yields were in the range of 1–6%. [¹⁸F]NIDA‐42033, a potential radiotracer for the study of CB₁ cannabinoid receptors in the animal brain by positron emission tomography, has been synthesized in sufficient quantities with specific radioactivity greater than 2500 mCi/μmol and radiochemical purity >95%. Copyright © 2002 John Wiley & Sons, Ltd.