Biomechanical effect of asymmetric mandibular prognathism treated with BSSRO and USSRO on temporomandibular joints: a three-dimensional finite element analysis

Asymmetric mandibular prognathism is a clinically common skeletal dentomaxillofacial deformity. Unilateral sagittal split ramus osteotomy (USSRO) is an effective alternative procedure to bilateral sagittal split ramus osteotomy (BSSRO) for some patients. However, the biomechanical effect of temporomandibular joint (TMJ) of USSRO has not been fully studied. This study aims to evaluate the stress distribution changes in the TMJ of asymmetric mandibular prognathism treated with BSSRO/USSRO, to validate the clinical feasibility of USSRO. Nineteen patients with mandibular prognathism patients who were treated with BSSRO (n = 12) and USSRO (n = 7) had preoperative and postoperative computed tomographic scanning. Preoperative and postoperative 3-dimensional finite element analysis (FEA) of functional TMJ movements were made on one BSSRO patient and one USSRO patient. In all patients, the ANB angle and mandibular deviation were significantly improved postoperatively. There was no significant difference in the postoperative ANB angle and mandibular deviation between the BSSRO group and the USSRO group. In two preoperative FEA models, the maximum stresses of non-deviation side TMJ structures were greater than the deviation side during functional movements. The unbalanced stress distribution was corrected postoperatively in both BSSRO/USSRO FE models. Both BSSRO/USSRO can improve the ANB angle and mandibular deviation. The bilateral TMJ structure in patients with asymmetric mandibular prognathism had unbalanced stress, which could be significantly improved with the USSRO as effectively as BSSRO.     

The influence of the closing and opening muscle groups of jaw condyle biomechanics after mandible bilateral sagittal split ramus osteotomy

ObjectiveTo investigate the influence of the closing and opening muscle groups of the jaw on mandibular stability after mandibular bilateral sagittal split ramus osteotomy (BSSRO).Materials and methodsTo establish finite element models of four conditions (the normal mandible, preoperative mandibular prognathism, postoperative (BSSRO) mandibular prognathism, and mandibular prognathism following virtual BSSRO), we imported Digital Imaging and Communications in Medicine (DICOM) data into three-dimensional reconstruction software. Finite element analysis software and statistical software were used for analysis of the condylar stress distribution as a function of condylar position during the actions of jaw closing and jaw opening muscle groups.ResultsThe stress distribution of the normal mandibular bilateral condyle was statistically different from the normal mandibular condyle, indicating that bilateral structures are asymmetrical. There was a significant difference in stress distributions with condyle position between healthy control patients and patients prior to mandibular prognathism surgery (P < 0.05). There was no significant difference in stress distributions between the normal mandible and the mandible following virtual surgery or real mandibular prognathism surgery. Additionally, there was no significant difference at 6 months after mandibular prognathism surgery (P > 0.05).ConclusionsBilateral structures of the normal mandible were asymmetrical. After mandibular bilateral sagittal split ramus osteotomy, variation of the force arms of closing and opening muscle groups of the jaw was one of the major factors influencing mandibular stability. Virtual surgery is a promising strategy for preoperative planning to improve surgical success and reduce complications.     

Morphological study of the changes after sagittal split ramus osteotomy in patients with facial asymmetry: measurements of 3-dimensional modelling

The effects of bilateral sagittal split ramus osteotomy (BSSRO) on the temporomandibular joint (TMJ) are still not well understood. The aim of this study was to compare the morphological differences among unaffected subjects on the one hand, and patients with facial asymmetry before and after BSSRO on the other. Ten Chinese patients (preoperative and postoperative groups, mean (SD) age 25 (5) years) diagnosed with facial asymmetry and 10 unaffected subjects (control group, mean (SD) age 27 (5) years) were recruited prospectively. The 3-dimensional morphological measurements made on 3-dimensional models in each group were assessed by analysis-of-variance (ANOVA) and Student’s t test, and probabilities of <0.05 were accepted as significant. The horizontal condylar angle (HCA), coronal condylar angle (CCA), sagittal ramus angle (SRA), medial joint space (MJS), lateral joint space (LJS), and superior joint space (SJS) differed significantly between the preoperative and control groups (HCA: p = 0.000, CCA: p = 0.000, SRA(left/undeviated side): p = 0.002, MJS(left/undeviated side): p = 0.000, MJS(right/deviated side): p = 0.007, LJS(right/deviated side): p = 0.000, SJS(left/undeviated side): p = 0.000, SJS(right/deviated side): p = 0.000). The SRA, MJS, LJS, and SJS differed significantly between the preoperative and postoperative groups (SRA(left/undeviated side): p = 0.012, MJS(left/undeviated side): p = 0.002, LJS(right/deviated side): p = 0.021, SJS(left/undeviated side): p = 0.000, SJS(right/deviated side): p = 0.001), And the SRA, MJS, and LJS in the preoperative group differed significantly between the deviated and undeviated side (SRA: p = 0.006; MJS: p = 0.003; LJS: p = 0.011). However, there were no significant differences in the postoperative and control groups between the deviated and undeviated sides. BSSRO improved the asymmetrical morphology of the TMJ and alleviated the symptoms.     

Changes in border movement of the mandible in skeletal Class III before and after orthognathic surgery

The purpose of this study was to examine the changes in border movement of the mandible before and after mandibular ramus osteotomy in patients with prognathism. The subjects were 73 patients with mandibular prognathism who underwent sagittal split ramus osteotomy (SSRO) with and without Le Fort I osteotomy. Border movement of the mandible was recorded with a mandibular movement measure system (K7) preoperatively and at 6 months postoperatively. Of the 73 patients, 21 had measurements taken at 1.5 years postoperative. Data were compared between the pre- and postoperative states, and the differences analyzed statistically. There was no significant difference between SSRO alone and SSRO with Le Fort I osteotomy in the time-course change. The values at 6 months postoperative were significantly lower than the preoperative values for maximum vertical opening (P = 0.0066), maximum antero-posterior movement from the centric occlusion (P = 0.0425), and centric occlusion to maximum opening (P = 0.0300). However, there were no significant differences between the preoperative and 1.5 years postoperative measurements. This study suggests that a postoperative temporary reduction in the border movement of the mandible could recover by 1.5 years postoperative, and the additional procedure of a Le Fort I osteotomy does not affect the recovery of mandibular motion after SSRO.     

Transverse stability of the proximal segment after bilateral sagittal split ramus osteotomy for mandibular setback surgery

This study aimed to evaluate the correlation between the transverse displacement of the proximal segment after bilateral sagittal osteotomy for mandibular setback and the amount and design of the mandibular setback. Patients who underwent either bilateral sagittal split ramus osteotomy (BSSRO) alone or two-jaw surgery were selected, and cephalographic postero-anterior (PA) measurements were taken pre-operatively (T1), immediately post-operatively (T2), and at follow-up (T3). The inter-gonal (IG) and inter-ramal (IR) width increased immediately after surgery, but decreased to the initial value during follow-up (P = 0.002; IR, P = 0.046). Only the immediate IG changes after surgery correlated with the amount of mandibular setback (P = 0.009). The IG changes were significant in the symmetric group, but not in the asymmetric group. There was no difference in the IG and IR changes between the symmetric group and the asymmetric group. The immediate IG change in two-jaw patients with symmetric setback showed correlation with the setback amount. The gonial width of the deviated group showed more significant changes than that of the non-deviated group. There was no difference in the unilateral gonial width between the deviated and the non-deviated group, but the difference was significant for the unilateral ramal angle between the two groups. These correlations will be helpful in predicting post-surgical results for patients.     

Comparative study of skeletal stability between bicortical resorbable and titanium screw fixation after sagittal split ramus osteotomy for mandibular prognathism

IntroductionResorbable screw fixation for orthognathic surgery is widely used in oral and maxillofacial surgery and has several advantages. However, surgeons are concerned about using resorbable screws in orthognathic surgery because of possible postoperative complications such as relapse, screw fracture, and infection. The purpose of this study was to evaluate the skeletal stability of bicortical resorbable screw fixation after sagittal split ramus osteotomies for mandibular prognathism.Materials and methodsThis study included 25 patients who underwent mandibular setback surgery fixed with resorbable screws after sagittal split osteotomy at the Department of Oral and Maxillofacial Surgery at Seoul National University Dental Hospital. Five resorbable screws (Inion CPS^®, Inion Ltd., Finland) were applied bicortically at each osteotomy site via a transbuccal approach. No rigid intermaxillary fixation was applied on the first postoperative day. Passive mouth opening exercises were allowed, using two light, rubber elastics for guidance. The control group was 25 patients fixed with four titanium screws. The follow-up period was 12–22 months (mean 17.8 months). Postoperative skeletal changes on lateral cephalometric radiographs were analyzed and compared between the two groups preoperatively, immediately postoperatively, and 6 months postoperatively.ResultsThe average setback was 6.9 mm and no major intraoperative complications occurred. One patient experienced infection immediately after surgery that was controlled uneventfully. The data did not demonstrate any significant difference in postoperative skeletal stability between the two groups. Differences between the immediate postoperative state and 6 months after surgery were not significant. In earlier cases, especially for patients with severe mandibular prognathism, immediate postoperative elastic traction was needed for stable occlusal guidance.ConclusionsThe results of this study indicate that bicortical resorbable screws offer a clinically stable outcome for the fixation of mandibular sagittal split osteotomies in mandibular prognathism. However the resorbable screws showed less stable results vertically than the titanium screws.     

Three-dimensional condylar displacement and remodelling in patients with asymmetrical mandibular prognathism following bilateral sagittal split osteotomy

This study aims to assess the postoperative condylar displacement and the long-term condylar remodelling in patients with mandibular prognathism with transverse asymmetry after bilateral sagittal split ramus osteotomy (BSSRO). Forty-one consecutive patients (82 condyles) with a transverse mandibular asymmetry of more than 4 mm without occlusal canting treated by BSSRO were included. The preoperative (T1), immediate postoperative (T2) and long-term follow-up of an average of 16.2 months (T3) spiral computed tomography scans were gathered and processed to measure the condylar displacement and remodelling based on cranial base voxel-based and rigid regional registrations. The statistical analysis revealed that the majority of condyles (T1–T2) were transitionally displaced forwards, downwards and laterally, and were not fully returned to the preoperative position at T3. Condylar lateral displacement was significantly higher on the deviated side (DS) (P = 0.035). Non-deviated side (NDS) condyles were mainly subjected to upward pitch, medial yaw and medial roll compared with downward pitch, lateral yaw and lateral roll on DS. Condylar remodelling at T3 was observed, with the superior and posterior surfaces commonly subjected to bone resorption, whereas the anterior and medial surfaces were commonly subjected to bone apposition. Condylar volumetric changes were relatively comparable on NDS (3 ± 85.2 mm³) and DS (8.3 ± 111.7 mm³) condyles. Age, amount of preoperative asymmetry and follow-up period were not correlated with the condylar remodelling. Transitional and rotational displacements were to some extent significantly correlated with the condylar remodelling on both sides. Consequently, passive condylar seating without torque might prevent the long-term unfavourable condylar remodelling.     

Surgical morbidities of sagittal split ramus osteotomy versus intraoral vertical ramus osteotomy for the correction of mandibular prognathism: a randomized clinical trial

The sagittal split ramus osteotomy (SSRO) and intraoral vertical ramus osteotomy (IVRO) are two common orthognathic procedures for the treatment of mandibular prognathism. This randomized clinical trial compared the surgical morbidities between SSRO and IVRO for patients with mandibular prognathism over the first 2 years postoperative. Ninety-eight patients (40 male, 58 female) with a mean age of 24.4 ± 3.5 years underwent bilateral SSRO (98 sides) or IVRO (98 sides) as part or all of their orthognathic surgery. IVRO presented less short-term and long-term surgical morbidity in general. The SSRO group had a greater incidence of inferior alveolar nerve deficit at all follow-up time points (P <  0.01). There was more TMJ pain at 6 weeks (P =  0.047) and 3 months (P =  0.001) postoperative in the SSRO group. The SSRO group also presented more minor complications, which were related to titanium plate exposure and infection. There were no major complications for either technique in this study. Despite the need for intermaxillary fixation, IVRO appears to be associated with less surgical morbidity than SSRO when performed as a mandibular setback procedure to treat mandibular prognathism.     

Is there a difference between the thicknesses of the rami in mandibular asymmetry?

The purpose of this retrospective study was to investigate whether the thicknesses of the two rami differ in patients with mandibular asymmetry. Preoperative cone beam computed tomography scans of 78 patients with mandibular asymmetry were assessed for ramus thickness, mandibular length, and mandibular shift. The results showed that the ramus was thinner on the longer side than on the shorter side in 85.9% of the patients. On average, the longer side of the mandible was 2.74 mm longer (range 0.07–9.90 mm, standard deviation 1.92 mm) and 0.55 mm thinner (range ?0.61 to 2.02 mm, standard deviation 0.59 mm) than the shorter side (both P < 0.001). This study indicates a trend in the discrepancy in ramus thickness between the longer and shorter side of about 8% of the mean thickness of the ramus. Regression analysis showed that for every 1-mm increase in the length of the mandible, the thickness of the superior aspect of the ramus was reduced by 0.041 mm (P = 0.009) and the anterior aspect by 0.125 mm (P = 0.001). Age and sex did not have a significant influence on the thickness of the mandible. It is concluded that the longer side of the mandible tends to be thinner at the ramus than the shorter side in patients with mandibular asymmetry. The implication of this finding could be important in relation to the sagittal split ramus osteotomy.     

Comparison of osseous healing after sagittal split ramus osteotomy and intraoral vertical ramus osteotomy

The sagittal split ramus osteotomy (SSRO) is generally associated with greater postoperative stability than the intraoral vertical ramus osteotomy (IVRO); however, it entails a risk of inferior alveolar nerve damage. In contrast, IVRO has the disadvantages of slow postoperative osseous healing and projection of the antegonial notch, but inferior alveolar nerve damage is believed to be less likely. The purposes of this study were to compare the osseous healing processes associated with SSRO and IVRO and to investigate changes in mandibular width after IVRO in 29 patients undergoing mandibular setback. On computed tomography images, osseous healing was similar in patients undergoing SSRO and IVRO at 1 year after surgery. Projection of the antegonial notch occurred after IVRO, but returned to the preoperative state within 1 year. The results of the study indicate that IVRO is equivalent to SSRO with regard to both bone healing and morphological recovery of the mandible.     

Cone–beam computed tomographic analysis of maxillary and mandibular changes after high condylectomy combined with orthodontic treatment for active unilateral condylar hyperplasia

Our aim was to evaluate the efficacy of high condylectomy combined with orthodontic treatment for active unilateral condylar hyperplasia in 25 affected patients, by an analysis of the maxillary and mandibular changes on cone–beam computed tomography (CT). High condylectomy was the sole operative treatment. Variables that reflected the canting of the occlusal plane, the height of the maxillary complex, the buccolingual angulation of the maxillary first molar, the height of the ramus, the total length of the mandible, and the deviation of the chin were measured and compared between the two sides and between time intervals: preoperatively (T1) and the end of treatment (T2). The differences between time intervals in the deviation of the chin (p < 0.001) and the canting of the occlusal plane (p < 0.001) were significant, but there were no significant differences in the height of the ramus (p = 0.476) and the total length of the mandible (p = 0.838) between the affected and unaffected sides at T2. There were significant differences between time intervals in the buccolingual angulation on the unaffected side and the height of the maxillary complex on the affected side (p < 0.001). Facial asymmetry was corrected and the occlusal plane was improved. In conclusion, high condylectomy as the sole operative treatment combined with orthodontic treatment can provide an alternative method for correction of facial asymmetry associated with active unilateral condylar hyperplasia.     

Subjective perception of paraesthesia of the lower lip after bilateral sagittal split osteotomy at a district general hospital

Our aim was to assess patients’ perception of paraesthesia of the lower lip after bilateral sagittal split osteotomy (BSSO) at a district general hospital. Patients who had BSSO between August 2013 and August 2014 (n = 46) were asked to score their perception of numbness between 0–10 (0 = normal sensation. 10 = complete loss of sensation/total numbness) one day postoperatively and then weekly for seven weeks, and at three months, 6 months, and one year. Data was collected on score sheets and by regular contact by telephone. Of the 46 operated on, 31 were female and 15 male. Data were available one year postoperatively for 43 patients. Ten of the 92 sides were reported as feeling normal on day 1 postoperatively, three-quarters as feeling normal at six months, and 79 at one year. On multivariate analysis there was no significant difference in postoperative sensation at one year between sides operated on by the registrar (left) and consultant (right) operated (p = 0.76). Our results compared favourably with the limited data available in similarly designed studies.     

Three-dimensional condylar displacement and remodelling following correction of asymmetric mandibular prognathism with maxillary canting

The aim of this study was to investigate the three-dimensional condylar displacement and long-term remodelling following the correction of asymmetric mandibular prognathism with maxillary canting. Thirty consecutive patients (60 condyles) with asymmetric mandibular prognathism >4 mm and occlusal canting >3 mm, treated by Le Fort I osteotomy and bilateral sagittal split ramus osteotomy, were included. Spiral computed tomography scans obtained at different periods during long-term follow-up (mean 17 ± 7.2 months) were gathered and processed using ITK-SNAP and 3D Slicer. The condyles were subjected to translational and rotational displacements immediately after the surgery (T2), which had not fully returned to the original preoperative positions at the last follow-up (T3). Condylar remodelling was observed at the last follow-up (T3), with the shorter side condyles subjected to higher surface resorption and overall condylar volume loss. The overall condylar volume on the shorter side was significantly reduced compared to the volume on the elongated side (?11.9 ± 90.6 vs ?131.7 ± 138.2 mm³; P = 0.001). About 73%, 87%, 53%, and 54% of the shorter side condyles experienced resorption on the posterior, superior, medial, and lateral surfaces, respectively; in contrast, only 50% of the elongated side condyles showed resorption on the superior surface. Higher preoperative asymmetry was significantly correlated with increased postoperative condylar displacement (P < 0.05). The vertical asymmetry and the vector of condylar displacement were associated with the resultant remodelling process. It is concluded that condylar resorption of the shorter side condyle, which may affect the long-term surgical stability, has to be considered.     

骨性下颌前突正畸—正颌联合治疗前后髁突位置变化的研究

目的:研究骨性下颌前突正畸-正颌联合治疗前后髁突位置的变化,探讨下颌双侧升支矢状劈开后退术对于治疗骨性下颌前突的可靠性和安全性。方法:15例骨性下颌前突的安氏Ⅲ类错牙合畸形病人,行下颌双侧升支矢状劈开后退术(bilateral sagittal split ramus osteotomy,BSSRO)与正畸矫治联合治疗,分别在术前两周和术后半年拍摄许勒式X线片,测量BSSRO术前、术后双侧髁突在关节窝内前、后、上间隙的距离,进行统计学分析比较术前术后髁突位置的变化情况。结果:15例病例经BSSRO配合正畸治疗后均达到正常的咬合关系,恢复了口腔功能,改善了面部容貌;正颌术前:左侧关节前、后、上间隙均数为1.91、2.30、2.51 mm;右侧前、后、上间隙均数为2.14、2.65、2.98 mm;正颌术后:左侧关节前、后、上间隙均数为1.99、2.38、2.62 mm;右侧前、后、上间隙均数为2.14、2.66、2.60 mm。术后半年双侧髁突在关节窝内的上、前、后间隙与术前两周相比,差异均无统计学意义。结论:下颌双侧升支矢状劈开后退术(BSSRO)配合正畸治疗,能够安全有效的矫治骨性下颌前突,并且未使其出现新的关节症状。     

Two-year follow-up of changes in bite force and occlusal contact area after intraoral vertical ramus osteotomy with and without Le Fort I osteotomy

This study was performed to examine the longitudinal changes in bite force and occlusal contact area after mandibular setback surgery via intraoral vertical ramus osteotomy (IVRO). Patients with mandibular prognathism who underwent IVRO (surgical group: 39 men and 39 women) were compared with subjects with class I skeletal and dental relationships (control group; 32 men and 35 women). The surgical group was divided into two subgroups: 1-jaw surgery (n = 30) and 2-jaw surgery (n = 48). Bite force and contact area were measured in maximum intercuspation with the Dental Prescale System before treatment, within 1 month before surgery, and at 1, 3, 6, 9, 12, and 24 months postsurgery. A linear mixed model was used to investigate the time-dependent changes and associated factors. Bite force and contact area decreased during presurgical orthodontic treatment, were minimal at 1 month postsurgery, and increased gradually thereafter. The 1-jaw and 2-jaw subgroups showed no significant differences in bite force. The time-dependent changes in bite force were significantly different according to the contact area (P < 0.05). The results of this study suggest that bite force and occlusal contact area gradually increase throughout the postsurgical evaluation period. Increasing the occlusal contact area may be essential for improving bite force after surgery.     

Evaluation of the lingual fracture patterns after bilateral sagittal split osteotomy according to Hunsuck/Epker modified by an additional inferior border osteotomy using a burr or ultrasonic device

This study was conducted to compare fracture patterns and operation times after sagittal split osteotomy (SSO) by Hunsuck/Epker approach, performed using a burr or ultrasonic device, with and without osteotomy modification. A total of 80 SSOs were performed in fresh human cadavers using a burr or ultrasonic device to investigate the influence of surgical instruments as well as an additional bone cut on the inferior border of the mandible in terms of lingual fracture patterns. The times required for osteotomy and sagittal split were measured, and postoperative cone beam computed tomography images of all splits were analyzed. Without an additional inferior osteotomy, preferred splits according to Hunsuck/Epker were achieved in 35% of cases (7/20) with the burr and 45% (9/20) with the ultrasonic instrument. The inferior modification resulted in a greater number of unwanted fracture patterns in both groups. There was no relationship between the split technique and the fracture pattern (P = 0.7854). Statistically significant differences in osteotomy time were observed between burr osteotomy and modified burr osteotomy (P = 0.006), as well as modified ultrasonic osteotomy (P < 0.001), but not between burr and ultrasonic surgery both without the inferior cut (P = 0.36). The bone cut on the inferior border did not improve split control, but rather increased the risk of unwanted fractures and extended the operation time.     

Dentures wearing reduce motion artifacts related to tongue movement in magnetic resonance imaging

Purpose

Tongue movement with unstable swallowing cause artifacts on magnetic resonance imaging (MRI). This may be associated with loss of occlusal support. This study aimed to clarify whether motion artifacts can be mitigated by denture wearing during MRI examination in patients without occlusal support, and whether denture wearing affect tongue stability, form, and position were also evaluated.

Le FortⅠ型骨切开上颌骨整体后退术矫治骨性Ⅱ类上颌骨前突畸形

目的：探讨Le Fort Ⅰ型骨切开（Le Fort Ⅰ osteotomy）上颌骨整体后退术在矫治骨性Ⅱ类上颌骨前突畸形中的价值。方法：对16例骨性Ⅱ类上颌前突患者（上颌骨前突伴下颌骨后缩14例,其中同时伴颏后缩6例;单纯上颌骨前突2例）进行外科-正畸联合治疗。患者治疗前头影测量∠ANB为7.0°～13.1°,平均9.3°。行Le Fort Ⅰ型骨切开上颌骨整体后退术,其中14例同期行双侧下颌支矢状骨劈开术（bilateral sagittal split ramus osteotomy,BSSRO）前移下颌骨,6例行颏成形术（genioplasty）前移颏部。结果：本组行LeFortⅠ型骨切开上颌骨整体后退4～8mm,14例BSSRO下颌骨前移4～7mm,6例颏成形术颏前移6～8mm。1例一侧腭降动脉术中损伤断裂,经结扎处理,无感染及骨块坏死。16例患者伤口均一期愈合。术后及正畸结束后∠ANB为1.6°～3.5°,平均2.9°。结束治疗后随访6～24个月,牙弓形态及[牙合]曲线正常,牙排列整齐,咬合关系良好,外形明显改善,疗效满意。结论：对于骨性Ⅱ类上颌骨前突畸形患者,Le Fort Ⅰ型骨切开上颌骨整体后退术是一种安全、合理、有效的正颌外科术式。     

Surgical guide and CAD/CAM prebent titanium plate for sagittal split ramus osteotomy in the correction of mandibular prognathism

This study was designed to introduce and evaluate the clinical use of a surgical guide and a CAD/CAM prebent titanium plate for sagittal split ramus osteotomy (SSRO) in the correction of mandibular prognathism. We studied 14 patients who had been diagnosed, and treated by bilateral SSRO with the guide, during the period July 2015–January 2016. Surface deviations of distal segments from simulation until the end of the operation were measured on a coloured map. Deviations of position and orientation of the condyle and proximal segment from before to after operation, and those from simulation until the end of the operation, were measured with a 3-dimensional vector. All patients were followed up for at least a year. The coloured map showed that the mean (SD) distances were 0.40 (0.25) mm between the simulated and postoperative distal segments. The 3-dimensional vector showed that the mean values of mediolateral, anteroposterior, and superior-inferior translations of the condyles were less than 1 mm (p < 0.02) from before the operation until the end, and from simulation to the end of the operation, and the mean value of pitching for proximal segments was less than 1° (p < 0.02) from simulation to the end of the operation. At the one year follow-up, the occlusions were stable. Based on accurate diagnosis and simulation, this guide takes the distal segment precisely to its planned position, and the condyle and proximal segment are well-controlled. This is a useful tool, which is comparatively easy to make and operate.