Material-dependent bone induction by calcium phosphate ceramics: a 2.5-year study in dog

Bone induction by different calcium phosphate biomaterials has been reported previously. With regard to (1) whether the induced bone would disappear with time due to the absence of mechanical stresses and (2) whether this heterotopically formed bone would give rise to uncontrolled growth, a long-time investigation of porous hydroxyapatite ceramic (HA), porous biphasic calcium phosphate ceramic (TCP/HA, BCP), porous alpha-tricalcium phosphate ceramic (alpha-TCP) and porous beta-tricalcium phosphate ceramic (beta-TCP) was performed in dorsal muscles of dog, for 2.5 years. Histological observation, backscattered scanning electron microscopy observation and histomorphometric analysis were made on thin un-decalcified sections of retrieved samples. Normal compact bone with bone marrow was found in all HA implants (n = 4) and in all BCP implants (n = 4), 48 +/- 4% pore area was filled with bone in HA implants and 41 +/- 2% in BCP implants. Bone-like tissue, which was a mineralised bone matrix with osteocytes but lacked osteoblasts and bone marrow, was found in all beta-TCP implants (n = 4) and in one of the four alpha-TCP implants. Both normal bone and bone-like tissues were confined inside the pores of the implants. The results show that calcium phosphate ceramics are osteoinductive in muscles of dogs. Although the quality and quantity varied among different ceramics, the induced bone in both HA and BCP ceramics did neither disappear nor grow uncontrollably during the period as long as 2.5 years.     

3D microenvironment as essential element for osteoinduction by biomaterials

In order to unravel the mechanism of osteoinduction by biomaterials, in this study we investigated the influence of the specific surface area on osteoinductive properties of two types of calcium phosphate ceramics. Different surface areas of the ceramics were obtained by varying their sintering temperatures. Hydroxyapatite (HA) ceramic was sintered at 1150 and 1250 degrees C. Biphasic calcium phosphate (BCP) ceramic, consisting of HA and beta-tricalcium phosphate (beta-TCP), was sintered at 1100, 1150 and 1200 degrees C. Changes in sintering temperature did not influence the chemistry of the ceramics; HA remained pure after sintering at different temperatures and the weight ratio of HA and beta-TCP in the BCP was independent of the temperature as well. Similarly, macroporosity of the ceramics was unaffected by the changes of the sintering temperature. However, microporosity (pore diameter <10 microm) significantly decreased with increasing sintering temperature. In addition to the decrease of the microporosity, the crystal size increased with increasing sintering temperature. These two effects resulted in a significant decrease of the specific surface area of the ceramics with increasing sintering temperatures. Samples of HA1150, HA1250, BCP1100, BCP1150 and BCP1200 were implanted in the back muscles of Dutch milk goats and harvested at 6 and 12 weeks post implantation. After explantation, histomorphometrical analysis was performed on all implants. All implanted materials except HA1250 induced bone. However, large variations in the amounts of induced bone were observed between different materials and between individual animals. Histomorphometrical results showed that the presence of micropores within macropore walls is necessary to make a material osteoinductive. We postulate that introduction of microporosity within macropores, and consequent increase of the specific surface area, affects the interface dynamics of the ceramic in such a way that relevant cells are triggered to differentiate into the osteogenic lineage.     

Evaluation of ceramics composed of different hydroxyapatite to tricalcium phosphate ratios as carriers for rhBMP-2

We have investigated pellet-shaped implants prepared from biphasic calcium phosphate (BCP) ceramics with five different ratios of hydroxyapatite (HAP) to beta tricalcium phosphate (beta-TCP). The purpose of this study was to evaluate these BCP ceramics as carriers for rhBMP-2. BCP ceramics impregnated with the different doses of recombinant human bone morphogenetic protein 2 (rhBMP-2) (1, 5 and 10g) were used for the experimental purpose and the ceramics without rhBMP-2 were used as control. The pellets were placed into subcutaneous pockets on the dorsum of 4-week-old male Wistar rats. The animals were sacrificed 2 and 4 weeks after implantation. Bone induction was estimated by alkaline phosphatase (ALP) activity measured at 2 weeks after implantation. Pellets were also examined radiologically, histologically and histomorphometrically. The results showed that all experimental pellets exhibited new bone formation whereas the control pellets produced only fibrous connective tissue. Here, 100% HAP ceramic showed most amount of bone formation, whereas 25% HAP to 75% TCP ceramic produced the bone least in amount among different BCP ceramics at the end of 4 weeks. This study indicates that formation of new bone depends on the ceramic content with high HAP-TCP ratio and high dose of rhBMP-2.     

Comparative study of biphasic calcium phosphate ceramics impregnated with rhBMP-2 as bone substitutes

We investigated pellet-shaped implants prepared from biphasic calcium phosphate (BCP) ceramics with five different ratios of hydroxyapatite (HAP) to beta-tricalcium phosphate (beta-TCP) to evaluate these ceramics as bone substitutes. BCP ceramics impregnated with different doses of recombinant human bone morphogenetic protein 2 (rhBMP-2) (1, 5, and 10 microg) were used for experimental purposes and ceramics without rhBMP-2 were used for control. The pellets were implanted under the pericranium in adult Wistar male rats and were harvested 8 weeks after implantation. The retrieved pellets were then examined radiologically, histologically, and histomorphometrically. The results revealed that the pellets treated with rhBMP-2 exhibited new bone and bone marrow, whereas control pellets produced fibrous connective tissues. The formation of new bone induced by rhBMP-2 was dose dependent. The extent of bone and bone marrow formation and the degree of resorption of the ceramic particles were significantly higher in the pellets composed of 25% HAP-75% TCP. In this study, bioresorption of the ceramic produced favorable conditions for rhBMP-2-induced bone formation.     

生物陶瓷微颗粒引发的细胞和组织损害

为论证生物陶瓷烧结不完全形成的微颗粒（〈5μm）引发细胞和组织损害的假设，对该类颗粒在体内和体外的细胞和组织损害进行了研究：（1）对4种双相生物陶瓷（BCP）进行细胞毒性试验。试验发现所有的浸出液出现细胞毒性，但是浸出液经离心后，毒性消失；（2）对羟基磷灰石（HA）、p磷酸三钙（pTCP）和40％pTCP／60％HA混合物微颗粒进行细胞抑制实验。结果显示随着微颗粒的浓度增加，成纤维细胞活力下降；而当微颗粒浓度达到一万个／细胞时，细胞活力和增殖能力完全消失；（3）HA，pTCP和BCP陶瓷颗粒（500-1500um）被植入到兔子股骨远端，种植12周后β-TCP的降解率为40％，BCP为5％，但是HA接近不降解。新骨形成在β-TCP（21％）和HA（18％）比BCP（12％）更为明显。同时BCP颗粒的周围有很多的微颗粒形成，可见吞噬细胞吞噬微颗粒，形成吞噬体。以上结果提示，微颗粒可能是局部炎症和细胞损害的首要原因，而且有可能影响骨形成。因此，我们必须注意生物陶瓷烧结的重要性，它们的烧结不良就可形成微颗粒，引发细胞和组织的损害。特别是BCP陶瓷含有两种需要不同烧结温度的粉体，它的烧结难度较高，很易形成微颗粒。     

Removal of surface by-products from sintered hydroxyapatite: effect of a chelation treatment on fibronectin adsorption and cell adhesion

It was observed that fibronectin precipitates when deposited on hydroxyapatite (HA) ceramics. Fibronectin's known affinity for calcium and the composition of the ceramic itself suggested that calcium release could be the main cause of this aggregation effect. It was then decided to investigate the effect of a surface chelation treatment on fibronectin adsorption, and MG63 cell adhesion, onto porous ceramics of hydroxyapatite (HA), beta-tricalcium phosphate (beta-TCP), and HA/TCP biphasic material (BCP). Those ceramics were immersed in an EDTA solution and the effect of this treatment on the material composition was assayed. X-ray diffraction data showed the presence of alpha- and beta-TCP phases in HA and BCP materials, which were both completely removed by the chelation treatment in the case of HA. On BCP, alpha-TCP was removed and beta-TCP partially dissolved. The TCP material, which was pure beta-TCP, underwent a mass loss, but no change in composition was observed. Adhesion of MG63 cells was overall higher on the fibronectin-coated EDTA-treated HA material, but was especially enhanced on EDTA-treated HA. Changes in surface morphologies, as compared with the use of scanning electron microscopy, did not seem to be related to the effects observed. The EDTA treatment proved to be a very efficient way of removing by-products of HA sintered materials, and thus enhancing the biocompatibility of the material.     

Crystallographic changes in calcium phosphates during plasma-spraying.

Coating hydroxyapatite (HA) onto metal implant surfaces using the plasma-spraying technique has been investigated in several laboratories as a means of improving the mechanical properties of the bulk ceramic. This study describes crystallographic changes which can occur during the plasma-spraying of calcium phosphate powders. A precipitated calcium-deficient apatite and a high temperature near-stoichiometric HA were each sprayed onto metal substrate in an argon plasma using several hydrogen gas flow conditions at various temperatures. The surfaces were examined by X-ray diffraction and scanning electron microscopy. The plasma-sprayed products were identified as a mixture of calcium phosphates including HA, beta-tricalcium phosphate (beta-TCP) and calcium oxide. Stoichiometric HA when plasma-sprayed showed the least (5%) degradation. Since beta-TCP is more resorbable than HA in vivo, varying the HA/beta-TCP ratio on the plasma-sprayed surface may provide a method to control surface dissolution of the coating.     

TEM study of calcium phosphate precipitation on HA/TCP ceramics

This study focuses on phase identification of precipitation on bioactive calcium phosphate (BCP) surfaces in vitro and in vivo. The BCP used in this study consisted of 70 wt% hydroxyapatite (HA) and 30 wt% beta-tricalcium phosphate. Single crystalline precipitates of calcium phosphates on porous BCP bioceramics obtained after immersion in dynamic simulated body fluid (SBF) and after implantation in pig muscle were examined using electron diffraction in transmission electron microscope. The crystals formed in vitro in dynamic SBF were identified as octacalcium phosphate (OCP), instead of apatite. Most of the precipitated crystals in vivo samples had an HA structure; while OCP and dicalcium phosphate dihydrate were also identified. The evidence from single diffraction patterns indicates that apatite formation on bioactive ceramics is a complicated process, particularly in physiological environments where formation might include a transient stage of intermediate phases.     

Sol-gel synthesis and characterization of macroporous calcium phosphate bioceramics containing microporosity

Amorphous calcium phosphate powders were precipitated from calcium metal and phosphoric acid in ethanol. Depending on the quantity of reagent, the CaP powders had different chemical compositions and, after heating, formed beta-tricalcium phosphate (beta-TCP), hydroxyapatite (HA) or BCP mixtures. Dilatometric measurements indicated that shrinkage of compacted CaP powders occurred first at around 650 degrees C and continued up to 1200 degrees C. The amorphous CaP powders were mixed with urea beads, compacted under isostatic pressure at 140 MPa and sintered at 1100 degrees C for 5 h. Scanning electron microscopy indicated that macro-microporous ceramics were produced. The ceramics had spherical macropores of 700-1200 microm in diameter, with limited interconnections and a macroporosity of 42% as determined by microcomputed tomography. The micropores ranged from 0.1 to 1 microm in diameter. These ceramics made of HA, beta-TCP or BCP exhibiting both macroporosity and microporosity can be used as bone fillers.     

Review paper: behavior of ceramic biomaterials derived from tricalcium phosphate in physiological condition

Various calcium phosphates are used for bone repair. Although hydroxyapatite (HA) sintered ceramics are widely used due to their osteoconductivity, its bioresorbability is so low that HA remains in the body for a long time after implantation. In contrast, tricalcium phosphate (TCP) ceramics show resorbable characters during bone regeneration, and can be completely substituted for the bone tissue after stimulation of bone formation. Therefore, much attention is paid to TCP ceramics for scaffold materials for supporting bone regeneration. This paper reviews bioresorbable properties of calcium phosphate ceramics derived from beta-TCP and alpha-TCP.     

Ectopic bone formation associated with mesenchymal stem cells in a resorbable calcium deficient hydroxyapatite carrier

Bone substitute materials can induce bone formation in combination with mesenchymal stem cells (MSC). The aim of the current study was to examine ectopic in vivo bone formation with and without MSC on a new resorbable ceramic, called calcium deficient hydroxyapatite (CDHA). Ceramic blocks characterized by a large surface (48 m2/g) were compared with beta-tricalcium phosphate (beta-TCP), hydroxyapatite (HA) ceramics (both ca. 0.5 m2/g surface) and demineralized bone matrix (DBM). Before implantation in the back of SCID mice carriers were freshly loaded with 2x10(5) expanded human MSC or loaded with cells and kept under osteogenic conditions for two weeks in vitro. Culture conditions were kept free of xenogenic supplements. Deposits of osteoid at the margins of ceramic pores occurred independent of osteogenic pre-induction, contained human cells, and appeared in 416 MSC/CDHA composites compared to 216 MSC/beta-TCP composites. ALP activity was significantly higher in samples with MSC versus empty controls (p<0.001). Furthermore, ALP was significantly (p<0.05) higher for all ceramics when compared to the DBM matrix. Compared to previous studies, overall bone formation appeared to be reduced possibly due to the strict human protocol. Ectopic bone formation in the novel biomaterial CDHA varied considerably with the cell pool and was at least equal to beta-TCP blocks.     

Osseointegration of 2 different types of calcium phosphate materials: ceramics and ionic cements

Different kinds of calcium phosphate biomaterials can be used as bone substitutes. Ceramics are constituted by HA or TCP grains linked by grain boundaries. Their porosity depends on the powder characteristics and the sintering temperature. It can be very low with a pore size inferior to one micron. The setting of calcium phosphate hydraulic cements results from the precipitation of a calcium phosphate phase different from the one in suspension in the paste. The strength of the cement is given by the entanglement of the growing mineral crystals. Calcium phosphate hydraulic cements and ceramics have very different physico-chemical characteristics. We have studied the histological integration of both kinds of material. The first material was constituted by macroporous ceramics composed of 75% HA and 25% beta-TCP, the cement was made of beta-TCP grains dispersed in a DCPD matrix. The sequence of events which leads to the ceramic integration is always the same: a/ ingrowth of a loose connective tissue; b/ osteoblast differentiation from fibroblast-like cells of the connective tissue in close proximity to the implant surface; c/ osteoid synthesis at the ceramic surface toward the pore center; d/ remodeling of the immature bone and the ceramic itself. The cement is differently integrated. The osteoblasts differentiate at some distance from the implant and there is a trabeculae ingrowth toward the material. CONCLUSIONS: The early stages of both materials osteointegration are different. The integration is centrifugal for ceramics and centripetal for the cement.     

Osteogenicity of biphasic calcium phosphate ceramics and bone autograft in a goat model

The aim of this work was to compare the osteogenicity of calcium phosphate ceramic granules with autologous bone graft in ectopic and orthotopic sites. Biphasic calcium phosphate (BCP) granules composed of hydroxyapatite (HA) and beta-tricalcium phosphate (beta-TCP) in a 60/40 ratio were sintered at 1050, 1125 and 1200 degrees C, producing different microporosities. Either BCP ceramic granules or autologous bone chips (n=7) were implanted into paraspinal muscles. Osteoinduction was not observed in either the BCP implants or autologous bone chips after 6 or 12 weeks in the ectopic sites. Hollow and bored polytetrafluoroethylene (PTFE) cylinders were filled with autologous bone, BCP granules or left empty, then implanted into critical-sized defects in femoral epiphyses. The PTFE cylinders left empty contained marrow and blood vessels but not mineralized bone, indicating that this model prevented bone ingrowth (0.56+/-0.43% at 12 weeks). Bone formation was observed in contact with the BCP1050 and BCP1125 granules in the femoral sites after 6 weeks. The amount of bone after 12 weeks was 5.6+/-7.3 and 9.6+/-6.6% for BCP1050 and BCP1125, respectively. Very little bone formation was observed with the BCP1200 implants (1.5+/-1.3% at 12 weeks). In both the ectopic and orthotopic sites, autologous bone chips were drastically resorbed (from 19.4+/-3.7% initially to 1.7+/-1.2% at 12 weeks). This study shows that synthetic bone substitutes may have superior stability and osteogenic properties than autologous bone grafts in critical-sized bone defects.     

Nanoindentation study of interfaces between calcium phosphate and bone in an animal spinal fusion model.

Intertransverse process spinal fusion is a common surgical procedure for the treatment of spinal disorders. In the present study, a porous hydroxyapatite (HA)/beta-tricalcium phosphate (beta-TCP) ceramic was tested as graft material using a rabbit lumbar transverse process (L5-L6) fusion model. The porous ceramic blocks were implanted onto the dorsal decorticated surface of the lumbar transverse processes. The specimens were harvested at the seventh week after implantation. Histomorphological observation revealed that the integration of HA/beta-TCP with the host bone of the transverse process occurred by both cancellous bone formation and cartilage formation. Scanning electron microscopy-wavelength dispersive X-ray spectrometry examinations showed significant differences in calcium, phosphorus, and sulfur contents in the newly formed tissues and the porous HA/TCP implants. Nanoindentations were used to evaluate the intrinsic mechanical properties of the implants and the newly formed tissues. The Young's moduli of the newly formed cartilage, new cancellous bone, and HA/TCP, were 0.66 +/- 0.02 GPa, 2.36 +/- 0.50 GPa, and 10.2 +/- 1.21 GPa, respectively. Nanoindentation results revealed degradation of the porous ceramics and incomplete calcification of the new cancellous bone at the seventh week after implantation. Nanoindentation appeared to be a useful technique for assessing the mechanical status of spinal fusion in animal models.     

Degradation of calcium phosphate ceramics.

Degradation of three types of sintered calcium phosphate ceramic spheres was investigated in vitro at low pH conditions (LPC) and in an in vivo model, that is, injection into a mouse peritoneal cavity. Degradation was observed under both conditions. The rate of degradation depended on the type of ceramic, with beta-TCP degrading faster than HA and HA degrading faster than FA. Degradation was characterized by dissolution of the necks and the formation of cracks and irregularities in the grains. Intraperitoneal injection of the spheres into a mouse peritoneal cavity led to the formation of foreign body granulomas in which degradation could be observed. The in vivo degradation pattern was similar to that observed in vitro, but longer implantation times resulted in a further degradation. Small fragments rich in Ca and P were present in inclusion bodies. Calcium phosphate crystals sometimes also were observed in mitochondria, many of which were subject to lysis. We observed that ceramic type and implantation period also were related to the number of dead cells in the granulomas. Furthermore, extracellular deposits were seen between cells and ceramic spheres. Ca and P and also Fe were detected in these deposits. The presence of Fe is indicative of a lysosomal origin and thus of exocytotic activity.     

Comparison of hydroxyapatite and beta tricalcium phosphate as bone substitutes after excision of bone tumors

Long-term results are reported in 23 patients and short-term results in 30 patients presenting with bone tumors treated by curettage or resection followed by implantation of hydroxyapatite (HA) or highly purified beta-tricalcium phosphate (beta-TCP), respectively. Mean follow-up was 97 and 26 months in cases involving HA implantation and beta-TCP implantation, respectively. Radiographs revealed HA incorporation into host bone in all but two cases; moreover, no obvious evidence of HA biodegradation was observed. A single patient exhibited late deformity following implantation of HA. All grafted beta-TCP was, at least partially, absorbed and replaced by newly formed bone. The mean period required for the disappearance of radiolucent zones between the ceramics and host bone was 17 weeks in HA and 9.7 weeks in beta-TCP. Highly purified beta-TCP appears to be advantageous relative to HA for surgical intervention in bone tumors consequent to the nature of remodeling and superior osteoconductivity.     

A new in vivo screening model for posterior spinal bone formation: comparison of ten calcium phosphate ceramic material treatments

This study presents a new screening model for evaluating the influence of multiple conditions on the initial process of bone formation in the posterior lumbar spine of a large animal. This model uses cages designed for placement on the decorticated transverse process of the goat lumbar spine. Five conduction channels per cage, each be defined by a different material treatment, are open to both the underlying bone and overlying soft tissue. The model was validated in ten adult Dutch milk goats, with each animal implanted with two cages containing a total of ten calcium phosphate material treatments according to a randomized complete block design. The ten calcium phosphate ceramic materials were created through a combination of material chemistry (BCP, TCP, HA), sintering temperature (low, medium, high), calcination and surface roughness treatments. To monitor the bone formation over time, fluorochrome markers were administered at 3, 5 and 7 weeks and the animals were sacrificed at 9 weeks after implantation. Bone formation in the conduction channels was investigated by histology and histomorphometry of non-decalcified sections using traditional light and epifluorescent microscopy. According to both observed and measured bone formation parameters, materials were ranked in order of increasing magnitude as follows: low sintering temperature BCP (rough and smooth) approximately medium sintering temperature BCP approximately = TCP > calcined low sintering temperature HA > non-calcined low sintering temperature HA > high sintering temperature BCP (rough and smooth) > high sintering temperature HA (calcined and non-calcined). These results agree closely with those obtained in previous studies of osteoconduction and bioactivity of ceramics thereby validating the screening model presented in this study.     

Bone regeneration of porous beta-tricalcium phosphate (Conduit TCP) and of biphasic calcium phosphate ceramic (Biosel) in trabecular defects in sheep

In this study bone regeneration between porous beta-tricalcium phosphate (Conduit TCP) and biphasic calcium phosphate ceramic (Biosel), with a hydroxyapatite/beta-TCP ratio of 75/25, was compared. The ceramic particles were implanted in sheep trabecular bone for 3, 12, and 26 weeks. Histomorphometrical analysis revealed that Conduit degraded significantly during time and only 36% of the material was left at 26 weeks implantation time. Biosel, in contrast, remained nearly intact. The degradation of Conduit was due to dissolution as well as cell-mediated. Biosel showed a high cellular intervention, although this material did not degrade. Both materials were osteoconductive. The amount of newly formed bone appeared greater in the Conduit group after 26 weeks (46% +/- 8% as compared to 37% +/- 8% for Biosel), but this difference was not significant. Bone distribution over the defect was homogeneous in Conduit, whereas Biosel showed significantly more bone in the periphery of the defect after 26 weeks in comparison to the center. In conclusion, both ceramics are biocompatible and osteoconductive. Degradation showed a difference in amount and in cellular events, with more degraded Conduit TCP with less cellular intervention as compared to Biosel.     

Bone in-growth induced by biphasic calcium phosphate ceramic in femoral defect of dogs

Biphasic calcium phosphate (BCP) ceramics consisting of hydroxyapatite (HA) and tricalcium phosphate (TCP) has been used as a bone graft material during the last decade. In this paper, we report the bone in-growth induced by BCP ceramic in the experimentally created circular defects in the femur of dogs. This BCP ceramic consists of 55% hydroxyapatite (HA) and 45% b-tricalcium phosphate (TCP) prepared in situ by the microwave method. The defects were created as 4-mm holes on the lateral aspect of the femur of dogs and the holes were packed with the implant material. The defective sites were radiographed at a period of 4, 8, and 12 weeks postoperatively. The radiographical results showed that the process of ossification started after 4 weeks and the defect was completely filled with new woven bone after 12 weeks. Histological examination of the tissue showed the formation of osteoblast inducing the osteogenesis in the defect. The collageneous fibrous matrix and the complete Haversian system were observed after 12 weeks. The blood serum was collected postoperatively and biochemical assays for alkaline phosphatase activity were carried out. The measurement of alkaline phosphatase activity levels also correlated with the formation of osteoblast-like cells. This microwave-prepared BCP ceramic has proved to be a good biocompatible implant as well as osteoconductive and osteoinductive materials to fill bone defects.     

Noninvasive bone replacement with a new injectable calcium phosphate biomaterial

The use of injectable calcium phosphate (CaP) biomaterials in noninvasive surgery should provide efficient bone colonization and implantation. Two different kinds of injectable biomaterials are presently under development: ionic hydraulic bone cements that harden in vivo after injection, and an association of biphasic calcium phosphate (BCP) ceramic granules and a water-soluble polymer vehicle (a technique particularly investigated by our group), providing an injectable CaP bone substitute (IBS). In our study, we compared these two approaches, using physicochemical characterizations and in vivo evaluations in light microscopy, scanning electron microscopy, and three-dimensional microtomography with synchrotron technology. Three weeks after implantation in rabbit bone, both biomaterials showed perfect biocompatibility and bioactivity, but new bone formation and degradation of the biomaterial were significantly greater for BCP granules than for ionic cement. Newly formed bone developed, binding the BCP granules together, whereas new bone grew only on the surface of the cement, which remained dense, with no obvious degradation 3 weeks after implantation. This study confirms that BCP granules carried by a cellulosic polymer conserve bioactivity and are conducive to earlier and more extensive bone substitution than a carbonated-hydroxyapatite bone cement. The presence of intergranular spaces in the BCP preparation, as shown on microtomography imaging, seems particularly favorable, allowing body fluids to reach each BCP granule immediately after implantation. Thus, the IBS functions as a completely interconnected ceramic with total open macroporosity. This new bone replacement approach should facilitate microinvasive bone surgery and local delivery of bone therapy agents.