Distal humeral migration as a component of multidirectional shoulder instability. An anatomical study in autopsy specimens

The object of the present study of autopsy specimens was to evaluate distal humeral migration during abduction allowed by sequential severance of capsular and ligamentous structures stabilizing the shoulder joint. A kinesiologic testing device continuously registered distal humeral migration, abduction angle, rotation, and flexion-extension. No distally directed force was applied to the humerus except the weight of the apparatus. Significant distal migration was recorded in the entire range of abduction (0 degrees -60 degrees) after solitary severance of the coracohumeral ligament as well as the proximal part of the anterior joint capsule. Further sectioning of the proximal part of the posterior capsule did not significantly increase distal humeral migration. Maximum distal migration (25 mm) was measured at 20 degrees of abduction. Applying an internal torque to the humerus significantly prevented distal migration as long as the posterior capsule was kept intact. Clinical testing for distal humeral migration should be performed with the shoulder joint at 20 degrees of abduction and neutral rotation. Furthermore, distal humeral migration can be significantly reduced by internal rotation of the humerus when the posterior joint capsule is intact.     

Release of the coracoacromial ligament can lead to glenohumeral laxity: a biomechanical study

The purpose of this study was to determine change in glenohumeral joint translation after release of the coracoacromial ligament. Six fresh, frozen unpaired glenohumeral joints were tested in a neutral position and at 30 degrees internal and 30 degrees external rotation of the humerus at 0 degrees, 30 degrees, and 60 degrees of abduction on a custom glenohumeral joint translation testing apparatus. A joint compression load of 20 N was simulated; then a 15-N load was applied to the humerus in anterior, posterior, superior, and inferior directions, and translations on the glenoid were measured with an electromagnetic tracking device. The tests were then repeated after a 1.5-cm section of the coracoacromial ligament was released from the acromion. A multivariate analysis of variance was used for statistical analyses with a P value of.05 as the level of significance. At 0 degrees and 30 degrees of abduction, release of the coracoacromial ligament resulted in a significant increase in glenohumeral joint translations, in both the anterior and inferior directions. In addition, the differences in translation between before and after the release of the coracoacromial ligament decreased in all directions as glenohumeral abduction increased, and they were not significant at 60 degrees of abduction in any of the rotations. The results of this study suggest that the coracoacromial ligament has a role in static restraint of the glenohumeral joint. It provides a suspension function and may restrain anterior and inferior translations through an interaction with the coracohumeral ligament. Although this is a biomechanical study without simulation of the shoulder muscles, it indicates that the coracoacromial ligament contributes to glenohumeral stability. Caution should be exercised in the release of the coracoacromial ligament in those with rotator cuff pain associated with glenohumeral instability.     

Shoulder capsule shrinkage and consequences on shoulder movements

A study was designed to find landmarks to avoid restriction of range of motion or insufficient shortening of the ligaments after thermal shoulder capsule shrinkage. In 15 nonembalmed shoulders from cadavers, shrinkage was done in three steps: (1). the middle glenohumeral ligament, (2). the anterior part of the inferior glenohumeral ligament, and (3). the posterior part of the glenohumeral ligament. Before and after each step passive range of motion of the glenohumeral joint was studied. Results indicated that flexion and the external rotation were not affected. External rotation in the scapular plane with 45 degree elevation diminished after shrinkage of the middle glenohumeral ligament. External rotation in full abduction diminished after shrinkage of the anterior part of the inferior glenohumeral ligament. Abduction diminished after shrinkage of the anterior and posterior parts of the inferior glenohumeral ligament. Internal rotation in full abduction was restricted after shrinkage of the posterior part of the inferior glenohumeral ligament. These results show a constant relation between the reduction of a given movement and the shrunken area, by providing useful landmarks to reduce the passive hyperabduction that is constant in anterior shoulder instability and to control the immediate effects on the other ranges of motion. To control the immediate consequences of shrinkage may help avoid excessive restriction of motion or insufficient reduction of capsular redundancy.     

The developmental anatomy of the neonatal glenohumeral joint

The embryologic development of the capsular ligaments, synovial lining, rotator cuff, and bony structures of the shoulder is incompletely understood. The purpose of this study is to report the gross and microscopic anatomy of the developing glenohumeral joint on the basis of dissections of fetal shoulder specimens. After Institutional Review Board approval from our hospital, 51 shoulders in 37 fetal specimens were obtained from cases of fetal demise. The gestation time of these specimens ranged from 9 to 40 weeks. The morphology of the capsule, labrum, and associated ligaments were studied by dissection under a dissecting microscope. High-resolution radiographs were made, and sections were processed for routine histology. There was noted to be minimal variation in the shape and slope of the acromion. The coracoid was much larger in relation to the shoulder than in the mature shoulder. The coracoacromial ligament was grossly evident at this stage of development, with distinct anterolateral and posteromedial bands in this ligament. The inferior glenohumeral ligament was seen as a prominent thickening in the capsule, whereas the middle and superior glenohumeral ligaments were thinner and more difficult to identify as distinct structures. Upon histologic examination, the inferior glenohumeral ligament was seen to consist of several layers of organized collagen fibers. The inferior glenohumeral ligament inserted into the labrum and margin of the glenoid. The capsule was much thinner in the region superior to the inferior glenohumeral ligament. A rotator interval capsular defect was often present, and the coracohumeral ligament was seen as a distinct structure as early as 15 weeks. A bare spot in the glenoid was not observed. This study indicates that some of the important functional elements of the structure of the mature human shoulder are present early in development, including the glenohumeral and coracohumeral ligaments. The coracoacromial ligament plays a significant role in the formation of the coracoacromial arch in the neonatal shoulder. The presence of a capsular rotator interval indicates that this aspect of capsular anatomy is congenital.     

Static stabilizers of the shoulder joint

Anatomic dissection of 220 cadaver shoulders was performed to find out more about the static stabilizers of the shoulder joint. The static stabilizers, i.e. the glenohumeral ligaments, were always found to be present and strong in healthy shoulders. It was revealed that in anatomic preparations with all the organs removal except the synovial capsule, the capsule ligaments completely stabilized the joint. Anterior dislocation at 45 degrees of abduction was prevented by the superior and medial glenohumeral ligaments, while at 90 degrees of abduction the inferior glenohumeral ligament prevented dislocation. When anterior dislocation has occurred even the coracohumeral ligament must be ruptured. A new finding recorded is that the glenoid labrum is the origin of the inferior glenohumeral ligament and not a triangular static organ enlarging the socket and having a similar function to the menisci in the knee. This ligament is the most important ventral stabilizer of the humeral joint. With the conventional arthrotomy technique the medial and inferior ligaments are immediately cut through and therefore cannot be seen. The inferior glenohumeral ligament must be reconstructed in cases of anterior recurrent dislocation.     

Posterior instability of the shoulder. A cadaver study

In a cadaver study of 15 shoulder specimens, the internal rotation of the joint was measured applying a constant internal torque of 1.5 Nm to the humerus. The specimens were suspended with the medial border of the scapula in vertical position. A lever fixed to the humerus was fitted with strain gauges for measurement of internal torque and sensors for measurement of internal rotation at different degrees of abduction from 0-90 degrees. Cutting the teres minor and infraspinatus muscle tendons increased internal rotation in the first 40 degrees of abduction. Internal rotation was further increased in this range by cutting also the proximal half of the posterior capsule. Lesion to the posterior capsular structures alone increased internal rotation from 40 degrees of abduction. In conclusion, among the posterior structures of the shoulder joint, the teres minor and the infraspinatus muscle tendons stabilize the joint for internal rotation in the first half of abduction, and the lower half of the capsule in the last part.     

Effect of joint compression on inferior stability of the glenohumeral joint

To determine the relative importance of negative intraarticular pressure, capsular tension, and joint compression on inferior stability of the glenohumeral joint we studied 17 fresh, normal adult cadaver shoulders using a "3 degrees of freedom" shoulder test apparatus. Translations were measured in intact and vented shoulders while a 50-N superior and inferior directed force was applied to the shoulder. Three different joint compressive loads (22 N, 111 N, 222 N) were applied externally. Tests were performed in 3 positions of humeral abduction in the scapular plane (0 degree, 45 degrees, 90 degrees) and in 3 positions of rotation (neutral, maximal internal, and maximal external). After tests of the intact and vented shoulder, the glenohumeral ligaments were sectioned and tests were repeated. With minimal joint compression of 22 N, negative intraarticular pressure and capsular tension limited translation of the humeral head on the glenoid. Increasing the joint compressive load to 111 N resulted in a reduction of mean inferior translation from 11.0 mm to 2.0 mm at 0 degree abduction, from 21.5 mm to 1.4 mm at 45 degrees abduction, and from 4.5 mm to 1.2 mm at 90 degrees abduction. With a compressive load of 111 N, venting the capsule or sectioning of glenohumeral ligaments had no effect on inferior stability. Clinical relevance: Glenohumeral joint compression through muscle contraction provides stability against inferior translation of the humeral head, and this effect is more important than negative intraarticular pressure or ligament tension.     

Anterior shoulder stability: Contributions of rotator cuff forces and the capsular ligaments in a cadaver model

The purpose of this study was to quantify in a biomechanical model the contributions to shoulder joint stability that are made by tensions in the four tendons of the rotator cuff and by static resistance of defined portions of the capsular ligaments. A materials testing machine was used to directly determine anterior joint laxity by measurement of the force required to produce a standard anterior subluxation. Shoulders were tested in external or neutral humeral rotation. Data were analyzed by multiway analysis of variance with regression analysis. This model simulated tensions in the rotator cuff musculature by applying static loads at the tendon insertion sites acting along the anatomic lines of action. A load in any of the cuff tendons resulted in a measurable and statistically significant contribution to anterior joint stability. The contributions between different tendons were not significantly different and did not depend on the humeral rotation (neutral or external). In neutral humeral rotation the superior and middle glenohumeral ligaments together function equally with the inferior glenohumeral ligament as primary stabilizers against anterior humeral translation. The posterior capsule is a secondary stabilizer. The external rotation of the abducted humerus increases anterior stability by more than doubling the stability contribution from the inferior glenohumeral ligament. The stability contribution from the posterior capsule is larger in external rotation than in neutral rotation but is still of secondary magnitude. In external rotation the stability contribution of the anterior capsule, including the superior glenohumeral ligament and the middle glenohumeral ligament, becomes insignificant. The model presented here simulates the combined effect of two major sources of shoulder stability. This versatile model permits the direct measurement of the contributions to anterior shoulder stability that are made by tensions in the rotator cuff tendons and by static resistance of defined capsular zones. The use of multiple regression analysis-a standard statistical technique but one relatively new to the orthopaedic literature-permits quantitative determination of the contribution of each independent variable to the dependent variable, shoulder stability.     

Posterior instability of the shoulder: A cadaver study

In a cadaver study of 15 shoulder specimens, the internal rotation of the joint was measured applying a constant internal torque of 1.5 Nm to the humerus. The specimens were suspended with the medial border of the scapula in vertical position. A lever fixed to the humerus was fitted with strain gauges for measurement of internal torque and sensors for measurement of internal rotation at different degrees of abduction from 0-90°. Cutting the teres minor and infraspinatus muscle tendons increased internal rotation in the first 40° of abduction. Internal rotation was further increased in this range by cutting also the proximal half of the posterior capsule. Lesion to the posterior capsular structures alone increased internal rotation from 40° of abduction.

In conclusion, among the posterior structures of the shoulder joint, the teres minor and the infraspinatus muscle tendons stabilize the joint for internal rotation in the first half of abduction, and the lower half of the capsule in the last part.     

Functional study of glenohumeral ligaments

BackgroundThe glenohumeral ligaments are passive stabilising anatomical structures of the shoulder which, in synergy with the other active and passive stabilising structures, enable joint movement and cohesion. The purpose of this study is to analyse the isolated and synergic function of the glenohumeral ligaments by using a tetrapolar detection system with computer analysis.MethodsIn a study performed on cadavers after anatomical dissection, detector electrodes were positioned on the individual ligaments and recordings were made of bioelectric impedance and, consequently, the resistance, which is an indicator of the state of tension or relaxation of the ligamentous complex. Predefined positions of the upper limb were adopted—neutral adduction, adduction with external rotation, abduction at 45° with neutral and external rotation, and abduction at 90° with neutral and external rotation.ResultsThe superior glenohumeral ligament is important in stabilisation of the glenohumeral joint in adduction and external rotation. The middle glenohumeral ligament is an important stabilising structure in the positions of adduction and external rotation and abduction up to 45° in external rotation. The resistance, and therefore tension, of the inferior glenohumeral ligament, which is negligible in positions of neutral adduction and adduction in external rotation, increases in value for angles between 45° and 90°, indicating the important stabilising function of this ligament in those positions.ConclusionOur experimental study on cadavers, which involved evaluating the resistance of the glenohumeral ligaments by means of tetrapolar detection and computer analysis of the results, contributes to our knowledge of the functional activity of the anterior portion of the joint capsule.     

Effect of selective capsulorrhaphy on the passive range of motion of the glenohumeral joint

BACKGROUND: Capsulorrhaphy of the glenohumeral joint is a common surgical procedure for the treatment of instability caused by increased capsular laxity. The effect of capsulorrhaphy on the range of motion of the shoulder is poorly understood. METHODS: We simulated localized capsular contractures by selective capsular plications in eight human cadaveric shoulders and studied the effect of such plications on the passive range of glenohumeral abduction, flexion, and external and internal rotation in different degrees of abduction. A 0.5 or 1-N-m torque was applied to the humerus, and the range of glenohumeral motion was measured with electronic goniometers in three planes and compared with those of the intact shoulder. RESULTS: Anterosuperior capsular plication most markedly affected external rotation of the adducted arm, decreasing it by a mean of 30.1 degrees (p < 0.0001). Anteroinferior plication significantly reduced abduction by a mean of 19.4 degrees (p < 0.0001) and external rotation by a mean of 20.6 degrees (p = 0.0046). Posterosuperior plication mostly limited internal rotation of the adducted arm (mean decrease, 16.1 degrees, p = 0.0045). On the average, total anterior and total posterior plication each limited flexion by approximately 20 degrees (p = 0.005) and abduction by >or=15 degrees (p < 0.005), whereas total anterior plication limited external rotation by >30 degrees (p 20 degrees (p < 0.0001). Total inferior capsular plication restricted abduction (by a mean of 27.7 degrees, p = 0.0001), flexion, and rotation. Total superior plication restricted external rotation and flexion. CONCLUSIONS AND CLINICAL RELEVANCE: Localized plications of the glenohumeral joint capsule lead to predictable patterns of loss of glenohumeral mobility. If plication is planned, losses of movement can be anticipated. The findings of this study may assist surgeons in identifying the parts of the capsule that are contracted and that may need lengthening.     

Effect of rotator interval closure on glenohumeral stability and motion: a cadaveric study

The effect of rotator interval closure, which is performed as an adjunct to arthroscopic stabilization of the shoulder, has not been clarified. Fourteen fresh-frozen cadaveric shoulders were used. The position of the humeral head was measured using an electromagnetic tracking device with the capsule intact, sectioned, and imbricated between the superior glenohumeral ligament and the subscapularis tendon (SGHL/SSC closure) or between the superior and middle glenohumeral ligaments (SGHL/MGHL closure). The direction of translational loads (10, 20, and 30 N) and arm positions were (1) anterior, posterior, and inferior loads in adduction; (2) anterior load in abduction/external rotation in the scapular plane; and (3) anterior load in abduction/external rotation in the coronal plane. The range of motion was measured using a goniometer under a constant force. Both methods reduced anterior translation in adduction. Only SGHL/MGHL closure reduced anterior translation in abduction/external rotation in the scapular plane and posterior translation in adduction. Both methods reduced the range of external rotation and horizontal abduction. Rotator interval closure is expected to reduce remnant anterior/posterior instability and thereby improve the clinical outcomes of arthroscopic stabilization procedures.     

Arthroscopic glenohumeral folds and microscopic glenohumeral ligaments: the fasciculus obliquus is the missing link

This study tested the hypotheses that the folds in the inferior glenohumeral capsule appear at the borders and crossings of the underlying capsular ligaments and that embalming may result in misinterpretation of these folds as ligaments. The inferior capsular structures in 80 unembalmed cadaver shoulders were compared with 24 embalmed shoulders. During arthroscopy and dissection, an anteroinferior fold was more prominently seen in internal rotation and was almost obliterated in external rotation. A posteroinferior fold appeared in external rotation and almost disappeared in internal rotation. During dissection, the anteroinferior fold developed at the border of the anterior band of the inferior glenohumeral ligament (ABIGHL) and where this ligament crossed with the fasciculus obliquus (FO). Several patterns of crossing of the ABIGHL and the FO were seen that determined the folding-unfolding mechanism of the anteroinferior fold and the appearance of possible synovial recesses. The axillary part of the IGHL is formed by the FO on the glenoid side and by the ABIGHL on the humeral side. The posteroinferior fold was determined by the posterior band of the IGHL. The folds in the embalmed specimens did not necessarily correspond with the underlying fibrous structure of the capsule. The folds and recesses observed during arthroscopy indicate the underlying capsular ligaments but are not the ligaments themselves. The IGHL complex is formed by its anterior and posterior bands and also by the FO. Both findings are important during shoulder instability procedures because the ligaments need to be restored to their appropriate anatomy and tension. Because the FO may also be involved, Bankart-type surgery may have to reach far inferiorly. Midsubstance capsular shift procedures also need to incorporate this ligament.     

The effect of radiofrequency thermal capsulorrhaphy on glenohumeral translation, rotation, and volume

The purpose of this study is to evaluate the effects of radiofrequency (RF) thermal capsulorrhaphy on the kinematic properties of the glenohumeral joint as determined by changes in resistance to multidirectional translational forces, alteration in the range of internal and external rotation, and changes in glenohumeral joint volume. Nonablative RF thermal energy was used to contract the glenohumeral joint capsule in 6 cadaveric shoulders. Measurements of translation were made after application of a 30-N load in anterior, posterior, and inferior directions. The maximum arc of internal and external rotation after application of a 1-N-m moment was also determined for vented specimens before and after thermal capsulorrhaphy. The percent reduction in glenohumeral capsular volume was measured by use of a saline solution injection-aspiration technique. Capsular shrinkage resulted in reductions in anterior, posterior, and inferior translation. The largest percent reductions in anterior translation were seen in external rotation at 45 degrees (48%, P <.05) and 90 degrees (41%, P <.05) abduction. For inferior translation, the largest percent reductions were seen in internal rotation at 45 degrees (40%, P <.05) and 90 degrees (45%, P <.05) abduction. Reductions in posterior translation were noted in internal rotation at 45 degrees (27%, P <.05) and 90 degrees (26%, P <.05) abduction. Other changes in translation were observed but were not statistically significant. The maximum arc of humeral rotation was reduced by a mean of 14 degrees at 45 degrees abduction and 9 degrees at 90 degrees abduction. The mean percent reduction in capsular volume for all shoulders was 37% (range, 8%-50%). This could not be correlated with percent reductions in translation and rotation. This study demonstrated the significant effect of RF thermal capsulorrhaphy in reducing glenohumeral multidirectional translation and volume with only a small loss of rotation in cadaveric shoulders.     

Biomechanical tests for type II SLAP lesions of the shoulder joint before and after arthroscopic repair

Superior labral anterior-to-posterior (SLAP) lesions can cause shoulder pain partly by causing glenohumeral instability. The purpose of this study was to examine the effect of a simulated type II SLAP lesion and subsequent repair on glenohumeral translation of the vented shoulder. In eight cadaver joints, a robotic/UFS testing system was used to measure joint translation by applying an anterior, posterior, or inferior load of 50 N to each shoulder. The "apprehension tests" for anterior and posterior instability were simulated by applying an anterior load of 50 N with an external rotation torque of 3 Nm or a posterior load of 50 N with an internal rotation torque of 3 Nm. Each loading condition was applied at 30 degrees and 60 degrees of glenohumeral abduction with a constant joint compressive load (44 N) to the intact, simulated SLAP lesion, and repaired shoulder. Repair of the type II SLAP was then performed by placing a Suretac through the labrum both anterior and posterior to the biceps anchor and testing was repeated. ANOVA was used to compare translation of the intact joint, the joint after the type II SLAP lesion had been simulated, and after repair. At 30 degrees of abduction, anterior translation of the intact vented shoulder joint from anterior loading was 18.7+/-8.5 mm and increased to 26.2+/-6.5 mm after simulation of the type II SLAP lesion ( p< or =0.05). The arthroscopic repair did not restore anterior translation (23.9+/-8.6 mm) to the same degree as the intact joint ( p> or =0.05). At 60 degrees of abduction, anterior translation of 16.6+/-9.6mm in the intact joint was not significantly increased at 19.4+/-10.1 after simulation of the type II SLAP lesion ( p=0.0527). AP loading also resulted in inferior translation. At 30 degrees of abduction it was 3.8+/-4.0 mm in the intact joint and increased to 8.5+/-5.4 mm after the type II SLAP lesion ( p< or =0.05. After repair the inferior translation decreased significantly to 6.7+/-5.3 mm ( p< or =0.05). Although inferior translations were less at 60 degrees of abduction, results were similar to those at 30 degrees after repair. There were no significant increases in translation after SI/AP combined external rotation torque or posterior-anterior combined internal rotation torque loading.In this study the repair of a type II SLAP lesion only partially restored translations to the same degree as an intact vented shoulder joint. Therefore, improved repair techniques or an anteroinferior capsulolabral procedure in addition to the type II SLAP lesion repair might be needed to restore normal joint function.     

Glenohumeral movement patterns after puncture of the joint capsule: An experimental study

In on experimental series comprising 22 shoulder specimens obtained at autopsy, we investigated the influence of an intact capsule on glenohumeral stability. Puncture of the capsule resulted in significant glenohumeral translation in unloaded and loaded specimens during shoulder abduction. A maximum of 16.6 mm of distal translation was observed at 20° of abduction. Concomitant with this translation the humerus spontaneously rotated externally, with a maximum rotation of 15.8° at 50° of abduction. After venting the capsule, anterior and posterior translation and external rotation were increased significantly. Maximum total increase in anteroposterior translation was 14 mm at 30° of abduction. The external rotation was increased up to 7.1° at 40° of abduction. These findings indicate that studies evaluating glenohumeral instability are compromised unless the translations resulting from capsular venting ore corrected. Evaluation of shoulder stability should be performed before violation of the intraarticular pressure mechanisms.     

Anterior glenohumeral stabilization factors: Progressive effects in a biomechanical model

The aim of this study was to evaluate the anterior stabilizing factors of the glenohumeral joint over a range of translations. The stabilizers examined included the capsular ligaments, the coracohumeral ligament, the rotator cuff muscles and the long head of the biceps. Simulated muscle forces were applied to eight shoulder specimens to produce 90° of total elevation of the arm in the scapular plane. Stability, defined as the force required to reach a specified subluxation, then was evaluated under varying configurations of capsule cuts, humeral rotation, and muscular loads. The overall force-displacement relationship of the subluxation was found to increase exponentially in external rotation to 239 N at 10 mm of displacement and to level off in neutral rotation to 172 N at 10 mm of displacement. Among the muscles, the biceps was the most important stabilizer in neutral rotation, providing more than 30 N of stabilization: the subscapularis provided the greatest degree of stabilization in external rotation, increasing to approximately 20 N. The subscapularis and supraspinatus were the most consistently important stabilizers in both types of rotation. In external rotation, the superior, middle, and inferior glenohumeral ligaments were the most effective ligamentous stabilizers, and all provided progressively more stabilization as higher displacements were reached. The stability provided by some of the ligaments reached nearly 50 N at 10 mm of displacement.     

Dynamic capsuloligamentous anatomy of the glenohumeral joint

Though many anatomic and biomechanical studies have been performed to elucidate capsuloligamentous anatomy of the glenohumeral joint, no previous studies have evaluated capsuloligamentous anatomy during rotator cuff contraction. The purpose of this study was to define and document the orientation and interrelationship between the glenohumeral ligaments during simulated rotator cuff contraction. Six fresh cadaveric shoulders were arthroscoped to document and grade ligamentous anatomy. The superior and middle glenohumeral ligaments and the anterior and posterior bands of the inferior glenohumeral ligament complex were labeled by an arthroscopicassisted technique with a linked metallic bead system. Shoulders were then placed onto an experimental apparatus that simulated rotator cuff function through computer-controlled servo-hydrolic actuators attached to the rotator cuff and biceps by a clamp and cable-and-pulley system. Simulated rotator cuff action and manual placement allowed shoulders to be placed into three positions of rotation (neutral, internal, and external) in three positions of scapular plane abduction (0°, 45°, 90°). Anteroposterior and axillary lateral plane radiographs were taken in each position to document orientation of all four ligaments. Both the superior and middle glenohumeral ligaments were maximally lengthened in 0° and 45° abduction and external rotation and appeared to shorten in all positions of abduction. The anterior and posterior bands of the inferior glenohumeral ligament complex maintained a cruciate orientation in all positions of abduction in the anteroposterior plane, except at 90° abduction and external rotation, where they are parallel. This cruciate orientation is due to the different location of the glenoid origin and humeral insertion of each band and may allow reciprocal tightening of each during rotation. The glenohumeral capsule is composed of discreet ligaments that undergo large charges in orientation during rotation. The superior and middle glenohumeral ligaments appear to complement the inferior glenohumeral ligaments, with the former tightening in adduction and the latter tightening in abduction. This relationship permits the large range of motion normally seen in the glenohumeral joint.     

Anatomy of the coracoacromial veil

The coracoacromial (CA) ligament plays an important role in the stability of the shoulder joint by limiting superior translation of the glenohumeral joint. This ligament is further divided into anterolateral and posteromedial bands. Attached to the CA ligament, a supportive structure was noted in some previous studies. The purpose of this study was to learn more about the anatomy of this structure. Twenty-eight shoulders were obtained. Deltoid and trapezius muscles were removed without damaging the rotator cuff and coracoacromial arch. The CA ligament was dissected further to reveal two constituent bands, an anterolateral and a posteromedial band. A connective tissue structure was noted between the posteromedial band, CA ligament, and rotator interval capsule. This structure was oriented as an L-shaped curtain, which the authors termed the "coracoacromial veil." Anatomical position of this veil provides a stabilizing link between the CA ligament and the rotator interval capsule. This structure potentially limits inferior translation of the glenohumeral joint.     

Coracoacromial ligament tension in vivo

Tension in the coracoacromial (CA) ligament has been postulated as the mechanism of acromial spur formation. Five patients (mean age, 58 years) undergoing open rotator cuff repair were recruited. A differential variable reluctance transducer (DVRT) was inserted into the CA ligament parallel to the fiber orientation. The DVRT measured linear displacement as the glenohumeral joint was moved through 90 degrees of abduction and full internal/external rotation. The CA ligament was then removed with the DVRT in situ. The specimen was mounted on a material-testing machine. Load was applied in the line of the CA ligament fibers, and the DVRT output recorded. The CA ligament was found to be under tension, which was lowest with the arm adducted (mean, 8.9 N; range, 3.7-22 N) and highest in abduction (mean, 15.7 N; range, 6.5-38 N). This study confirms CA ligament tension in vivo as a possible stimulus for acromial spur formation.