Structural changes in collagen fibrils across a mineralized interface revealed by cryo-TEM

The structure of the mineralized collagen fibril, which is the basic building block of mineralized connective tissues, is critical to its function. We use cryo-TEM to study collagen structure at a well-defined hard–soft tissue interface, across which collagen fibrils are continuous, in order to evaluate changes to collagen upon mineralization. To establish a basis for the analysis of collagen banding, we compared cryo-TEM images of rat-tail tendon collagen to a model based on the X-ray structure. While there is close correspondence of periodicity, differences in band intensity indicate fibril regions with high density but lacking order, providing new insight into collagen fibrillar structure. Across a mineralized interface, we show that mineralization results in an axial contraction of the fibril, concomitant with lateral expansion, and that this contraction occurs only in the more flexible gap region of the fibril. Nevertheless, the major features of the banding pattern are not significantly changed, indicating that the axial arrangement of molecules remains largely intact. These results suggest a mechanism by which collagen fibrils are able to accommodate large amounts of mineral without significant disruption of their molecular packing, leading to synergy of mechanical properties.     

The loci of mineral in turkey leg tendon as seen by atomic force microscope and electron microscopy

Transmission electron micrographs of fully mineralized turkey leg tendon in cross-section show the ultrastructure to be more complex than has been previously described. The mineral is divided into two regions. Needlelike-appearing crystallites fill the extrafibrillar volume whereas only platelike crystallites are found within the fibrils. When the speciment is tilted through a large angle, some of the needlelike-appearing crystallites are replaced by platelets, suggesting that the needlelike crystallites are platelets viewed on edge. If so, these platelets have their broad face roughly parallel to the fibril surface and thereby the fibril axis, where the intrafibrillar platelets are steeply inclined to the fibril axis. The projection of the intrafibrillar platelets is perpendicular to the fibril axis. The extrafibrillar volume is at least 60% of the total, the fibrils occupying 40%. More of the mineral appears to be extrafibrillar than within the fibrils. Micrographs of the mineralized tendon in thickness show both needlelike-appearing and platelet crystallites. Stereoscopic views show that the needlelike-appearing crystallites do not have a preferred orientation. From the two-dimensional Fourier transform of a selected area of the cross-sectional image, the platelike crystallites have an average dimension of 58 nm. The needlelike-appearing crystallites have an average thickness of 7 nm. The maximum length is at least 90 nm. Atomic force microscopy (AFM) of unstained, unmineralized turkey leg tendon shows collagen fibrils very much like shadow replicas of collagen in electron micrographs. AFM images of the mineralized tendon show only an occasional fibril. Mineral crystallites are not visible. Because the collagen is within the fibrils, the extrafibrillar mineral must be embedded in noncollagenous organic matter. When the tissue is demineralized, the collagen fibrils are exposed. The structure as revealed by the two modalities is a composite material in which each component is itself a composite. Determination of the properties of the mineralized tendon from the properties of its elements is more difficult than considering the tendon to be just mineral-filled collagen.     

Bone Material Properties in Osteogenesis Imperfecta

Osteogenesis imperfecta entrains changes at every level in bone tissue, from the disorganization of the collagen molecules and mineral platelets within and between collagen fibrils to the macroarchitecture of the whole skeleton. Investigations using an array of sophisticated instruments at multiple scale levels have now determined many aspects of the effect of the disease on the material properties of bone tissue. The brittle nature of bone in osteogenesis imperfecta reflects both increased bone mineralization density—the quantity of mineral in relation to the quantity of matrix within a specific bone volume—and altered matrix‐matrix and matrix mineral interactions. Contributions to fracture resistance at multiple scale lengths are discussed, comparing normal and brittle bone. Integrating the available information provides both a better understanding of the effect of current approaches to treatment—largely improved architecture and possibly some macroscale toughening—and indicates potential opportunities for alternative strategies that can influence fracture resistance at longer‐length scales. © 2016 American Society for Bone and Mineral Research.     

Significant deterioration in nanomechanical quality occurs through incomplete extrafibrillar mineralization in rachitic bone: evidence from in-situ synchrotron X-ray scattering and backscattered electron imaging

Bone diseases such as rickets and osteoporosis cause significant reduction in bone quantity and quality, which leads to mechanical abnormalities. However, the precise ultrastructural mechanism by which altered bone quality affects mechanical properties is not clearly understood. Here we demonstrate the functional link between altered bone quality (reduced mineralization) and abnormal fibrillar-level mechanics using a novel, real-time synchrotron X-ray nanomechanical imaging method to study a mouse model with rickets due to reduced extrafibrillar mineralization. A previously unreported N-ethyl-N-nitrosourea (ENU) mouse model for hypophosphatemic rickets (Hpr), as a result of missense Trp314Arg mutation of the phosphate regulating gene with homologies to endopeptidase on the X chromosome (Phex) and with features consistent with X-linked hypophosphatemic rickets (XLHR) in man, was investigated using in situ synchrotron small angle X-ray scattering to measure real-time changes in axial periodicity of the nanoscale mineralized fibrils in bone during tensile loading. These determine nanomechanical parameters including fibril elastic modulus and maximum fibril strain. Mineral content was estimated using backscattered electron imaging. A significant reduction of effective fibril modulus and enhancement of maximum fibril strain was found in Hpr mice. Effective fibril modulus and maximum fibril strain in the elastic region increased consistently with age in Hpr and wild-type mice. However, the mean mineral content was ～21% lower in Hpr mice and was more heterogeneous in its distribution. Our results are consistent with a nanostructural mechanism in which incompletely mineralized fibrils show greater extensibility and lower stiffness, leading to macroscopic outcomes such as greater bone flexibility. Our study demonstrates the value of in situ X-ray nanomechanical imaging in linking the alterations in bone nanostructure to nanoscale mechanical deterioration in a metabolic bone disease.     

Collagen structure regulates fibril mineralization in osteogenesis as revealed by cross-link patterns in calcifying callus.

Although >80% of the mineral in mammalian bone is present in the collagen fibrils, limited information is available about factors that determine a proper deposition of mineral. This study investigates whether a specific collagen matrix is required for fibril mineralization. Calcifying callus from dog tibias was obtained at various times (3-21 weeks) after fracturing. At 3 weeks, hydroxylysine (Hyl) levels were almost twice as high as in control bone, gradually reaching normal levels at 21 weeks. The decrease in Hyl levels can only be the result of the formation of a new collagen network at the expense of the old one. The sum of the cross-links hydroxylysylpyridinoline (HP) and lysylpyridinoline (LP) in callus matched that of bone at all stages of maturation. However, the ratio HP/LP was 2.5-4.5 times higher in callus at 3-7 weeks than in normal bone and was normalized at 21 weeks. Some 40% of the collagen was nonmineralized at the early stages of healing, reaching control bone values (approximately 10%) at 21 weeks. In contrast, only a small increase in callus mineral content from 20.0 to 22.6 (% of dry tissue weight) from week 3 to 21 was seen, indicating that initially a large proportion of the mineral was deposited between, and not within, the fibrils. A strong relationship (r = 0.80) was found between the ratio HP/LP and fibril mineralization; the lower the HP/LP ratio, the more mineralized the fibrils were. Because the HP/LP ratio is believed to be the result of a specific packing of intrafibrillar collagen molecules, this study implies that mineralization of fibrils is facilitated by a specific orientation of collagen molecules in the fibrils.     

Repeated subrupture overload causes progression of nanoscaled discrete plasticity damage in tendon collagen fibrils

A critical feature of tendons and ligaments is their ability to resist rupture when overloaded, resulting in strains or sprains instead of ruptures. To treat these injuries more effectively, it is necessary to understand how overload affects the primary load‐bearing elements of these tissues: collagen fibrils. We have investigated how repeated subrupture overload alters the collagen of tendons at the nanoscale. Using scanning electron microscopy to examine fibril morphology and hydrothermal isometric tension testing to look at molecular stability, we demonstrated that tendon collagen undergoes a progressive cascade of discrete plasticity damage when repeatedly overloaded. With successive overload cycles, fibrils develop an increasing number of kinks along their length. These kinks—discrete zones of plastic deformation known to contain denatured collagen molecules—are accompanied by a progressive and eventual total loss of D‐banding along the surface of fibrils, indicating a loss of native molecular packing and further molecular denaturation. Thermal analysis of molecular stability showed that the destabilization of collagen molecules within fibrils is strongly related to the amount of strain energy dissipated by the tendon after yielding during tensile overload. These novel findings raise new questions about load transmission within tendons and their fibrils and about the interplay between crosslinking, strain‐energy dissipation ability, and molecular denaturation within these structures. © 2012 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 31: 731–737, 2013     

The Essential Role of Fetuin in the Serum-Induced Calcification of Collagen

The mineral in bone is located primarily within the collagen fibril, and during mineralization the fibril is formed first and then water within the fibril is replaced with mineral. Our goal is to understand the mechanism of fibril mineralization, and as a first step we recently determined the size exclusion characteristics of the fibril. This study indicates that apatite crystals up to 12 unit cells in size can access the water within the fibril while molecules larger than a 40-kDa protein are excluded. We proposed a novel mechanism for fibril mineralization based on these observations, one that relies exclusively on agents excluded from the fibril. One agent generates crystals outside the fibril, some of which diffuse into the fibril and grow, and the other selectively inhibits crystal growth outside of the fibril. We have tested this mechanism by examining the impact of removing the major serum inhibitor of apatite growth, fetuin, on the serum-induced calcification of collagen. The results of this test show that fetuin determines the location of serum-driven mineralization: in fetuin’s presence, mineral forms only within collagen fibrils; in fetuin’s absence, mineral forms only in solution outside the fibrils. The X-ray diffraction spectrum of serum-induced mineral is comparable to the spectrum of bone crystals. These observations show that serum calcification activity consists of an as yet unidentified agent that generates crystal nuclei, some of which diffuse into the fibril, and fetuin, which favors fibril mineralization by selectively inhibiting the growth of crystals outside the fibril.     

Collagen types. Molecular structure and tissue distribution.

The collagens are products of a superfamily of closely related genes. Currently, there are 13 described collagens encompassing at least 25 separate genes. The collagen molecules can be categorized into four classes. Class I consists of molecules that form the banded collagen fibers that are readily seen by routine electron microscopy. The banded fibers are heterogenous with respect to collagen type, containing at least two and often three collagen types in each fibril. This multiplicity is believed to effect the rate of fibril growth and the final fibril diameter. Class II contains collagens that adhere to the surface of the banded fibrils. The function of these molecules is not yet known. The third Class consists of molecules that form independent fiber systems. These include the basement membrane, beaded filaments, anchoring fibrils, and the network surrounding hypertrophic chondrocytes. The last class contains several collagens with unknown fiber forms, and whose functions are unclear. Tissues contain multiple fiber forms and therefore many individual collagen types. Bone is no different, and there are presently four known collagens in the bone cortex. This article summarizes knowledge of the structures and functions of the collagen superfamily.     

How Tough Is Brittle Bone? Investigating Osteogenesis Imperfecta in Mouse Bone

The multiscale hierarchical structure of bone is naturally optimized to resist fractures. In osteogenesis imperfecta, or brittle bone disease, genetic mutations affect the quality and/or quantity of collagen, dramatically increasing bone fracture risk. Here we reveal how the collagen defect results in bone fragility in a mouse model of osteogenesis imperfecta (oim), which has homotrimeric α1(I) collagen. At the molecular level, we attribute the loss in toughness to a decrease in the stabilizing enzymatic cross‐links and an increase in nonenzymatic cross‐links, which may break prematurely, inhibiting plasticity. At the tissue level, high vascular canal density reduces the stable crack growth, and extensive woven bone limits the crack‐deflection toughening during crack growth. This demonstrates how modifications at the bone molecular level have ramifications at larger length scales affecting the overall mechanical integrity of the bone; thus, treatment strategies have to address multiscale properties in order to regain bone toughness. In this regard, findings from the heterozygous oim bone, where defective as well as normal collagen are present, suggest that increasing the quantity of healthy collagen in these bones helps to recover toughness at the multiple length scales. © 2014 American Society for Bone and Mineral Research.     

Inhomogeneous fibril stretching in antler starts after macroscopic yielding: Indication for a nanoscale toughening mechanism

Antler is a unique mineralized tissue, with extraordinary toughness as well as an ability to annually regenerate itself in its entirety. The high fracture resistance enables it to fulfill its biological function as a weapon and defensive guard during combats between deer stags in the rutting season. However, very little is quantitatively understood about the structural origin of the antler's high toughness. We used a unique combination of time-resolved synchrotron small angle X-ray diffraction together with tensile testing of antler cortical tissue under physiologically wet conditions. We measured the deformation at the nanoscale from changes in the meridional diffraction pattern during macroscopic stretch-to-failure tests. Our results show that on average fibrils are strained only half as much as the whole tissue and the fibril strain increases linearly with tissue strain, both during elastic and inelastic deformation. Most remarkably, following macroscopic yielding we observe a straining of some fibrils equal to the macroscopic tissue strain while others are hardly stretched at all, indicating an inhomogeneous fibrillar strain pattern at the nanoscale. This behavior is unlike what occurs in plexiform bovine bone and may explain the extreme toughness of antler compared to normal bone.     

Collagen and mineral deposition in rabbit cortical bone during maturation and growth: Effects on tissue properties

We characterized the composition and mechanical properties of cortical bone during maturation and growth and in adult life in the rabbit. We hypothesized that the collagen network develops earlier than the mineralized matrix. Growth was monitored, and the rabbits were euthanized at birth (newborn), and at 1, 3, 6, 9, and 18 months of age. The collagen network was assessed biochemically (collagen content, enzymatic and non‐enzymatic cross‐links) in specimens from the mid‐diaphysis of the tibia and femur and biomechanically (tensile testing) from decalcified whole tibia specimens. The mineralized matrix was analyzed using pQCT and 3‐point bend tests from intact femur specimens. The collagen content and the Young's modulus of the collagen matrix increased significantly until the rabbits were 3 months old, and thereafter remained stable. The amount of HP and LP collagen cross‐links increased continuously from newborn to 18 months of age, whereas PEN cross‐links increased after 6 months of age. Bone mineral density and the Young's modulus of the mineralized bone increased until the rabbits were at least 6 months old. We concluded that substantial changes take place during the normal process of development in both the biochemical and biomechanical properties of rabbit cortical bone. In cortical bone, the collagen network reaches its mature composition and mechanical strength prior to the mineralized matrix. © 2010 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 28:1626–1633, 2010     

Extracellular post-translational modifications of collagen are major determinants of biomechanical properties of fetal bovine cortical bone

Mechanical behavior of bone depends on its mass and architecture, and on the material properties of the matrix, which is composed of a mineral phase and an organic component mainly constituted of type I collagen. Mineral accounts largely for the stiffness of bone, whereas type I collagen provides bone its ductility and toughness, i.e., its ability to undergo deformation and absorb energy after it begins to yield. The molecular mechanisms underlying the effect of alterations in type I collagen on bone mechanical properties are unclear. We used an in vitro model of fetal bovine cortical bone specimens (n = 44), where the extent of type I collagen cross-linking was modified by incubation at 37 degrees C for 0, 60, 90 and 120 days, keeping constant the architecture and the mineral content. At each incubation time, the following parameters were determined: (1) the bone concentration of enzymatic (pyridinoline; PYD and deoxypyridinoline, DPD) and non-enzymatic (pentosidine) crosslinks by HPLC, (2) the extent of aspartic acid isomerization of the type I collagen C-telopeptide (CTX) by ELISA of native (alpha CTX) and isomerized (beta CTX) forms, (3) the mineral density by DXA, (4) the porosity by micro-computed tomography and (5) the bending and compressive mechanical properties. Incubation of bone specimens at 37 degrees C for 60 days increased the level (per molecule of collagen) of PYD (+98%, P = 0.005), DPD (+42%, P = 0.013), pentosidine (+55-fold, P = 0.005), and the degree of type I collagen C-telopeptide isomerization (+4.9-fold, P = 0.005). These biochemical changes of collagen were associated with a 30% decrease in bending and compressive yield stress and a 2.5-fold increase in compressive post-yield energy absorption (P < 0.02 for all), with no significant change of bone stiffness. In multivariate analyses, the level of collagen cross-linking was associated with yield stress and post-yield energy absorption independently of bone mineral density, explaining up to 25% of their variance. We conclude that the extent and nature of collagen cross-linking contribute to the mechanical properties of fetal bovine cortical bone independently of bone mineral density.     

Understanding Bone Strength Is Not Enough

Increases in fracture risk beyond what are expected from bone mineral density (BMD) are often attributed to poor “bone quality,” such as impaired bone tissue strength. Recent studies, however, have highlighted the importance of tissue material properties other than strength, such as fracture toughness. Here we review the concepts behind failure properties other than strength and the physical mechanisms through which they cause mechanical failure: strength describes failure from a single overload; fracture toughness describes failure from a modest load combined with a preexisting flaw or damage; and fatigue strength describes failure from thousands to millions of cycles of small loads. In bone, these distinct failure mechanisms appear to be more common in some clinical fractures than others. For example, wrist fractures are usually the result of a single overload, the failure mechanism dominated by bone strength, whereas spinal fractures are rarely the result of a single overload, implicating multiple loading cycles and increased importance of fatigue strength. The combination of tissue material properties and failure mechanisms that lead to fracture represent distinct mechanistic pathways, analogous to molecular pathways used to describe cell signaling. Understanding these distinct mechanistic pathways is necessary because some characteristics of bone tissue can increase fracture risk by impairing fracture toughness or fatigue strength without impairing bone tissue strength. Additionally, mechanistic pathways to failure associated with fracture toughness and fatigue involve multiple loading events over time, raising the possibility that a developing fracture could be detected and interrupted before overt failure of a bone. Over the past two decades there have been substantial advancements in fracture prevention by understanding bone strength and fractures caused by a single load, but if we are to improve fracture risk prevention beyond what is possible now, we must consider material properties other than strength. © 2017 American Society for Bone and Mineral Research.     

Transmenopausal Changes in Trabecular Bone Quality

Bone strength depends on its amount and quality. Bone quality includes its structural and material properties. Bone material properties are dependent on bone turnover rates. Remodeling rates are significantly increased immediately after menopause. In the present study, we used Raman microspectroscopic analysis of double iliac crest biopsies with a spatial resolution of 1 µm obtained before and immediately after menopause (1 year after cessation of menses) in healthy females to investigate changes in material properties attributable to menopause. In particular, the mineral/matrix ratio, the relative proteoglycan and lipid content, the mineral maturity/crystallinity, and the relative pyridinoline collagen cross‐link content were determined in trabecular bone as a function of surface metabolic activity and tissue age. The results indicate that significant changes (specifically in mineral/matrix ratio) were evident at active bone forming surfaces, whereas the relative proteoglycan content was altered at resorbing surfaces. These changes were not accompanied by altered mineral content or quality as monitored by Raman microspectroscopic analysis. © 2014 American Society for Bone and Mineral Research.     

Visualization of crystal-matrix structure. In situ demineralization of mineralized turkey leg tendon and bone

A technique to correlate the ultrastructural distribution of mineral with its organic material in identical sections of mineralized turkey leg tendon (MTLT) and human bone was developed. Osmium or ethanol fixed tissues were processed for transmission electron microscopy (TEM). The mineralized tissues were photographed at high, intermediate, and low magnifications, making note of section features such as fibril geometry, colloidal gold distribution, or section artifacts for subsequent specimen realignment after demineralization. The specimen holder was removed from the microscope, the tissue section demineralized in situ with a drop of 1 N HCl, then stained with 2% aqueous vanadyl sulfate. The specimen holder was reinserted into the microscope, realigned with the aid of the section features previously noted, and rephotographed at identical magnification used for the mineralized sections. A one to one correspondence was apparent between the mineral and its demineralized crystal ghost in both MTLT and bone. The fine structural periodic banding seen in unmineralized collagen was not observed in areas that were fully mineralized before demineralization, indicating that the axial arrangement of the collagen molecules is altered significantly during mineralization. Regions that had contained extrafibrillar crystallites stained more intensely than the intrafibrillar regions, indicating that the noncollagenous material surrounded the collagen fibrils. The methodology described here may have utility in determining the spatial distribution of the noncollagenous proteins in bone.     

骨质疏松性骨折防治新概念:补充韧骨元素镁、锌、铜、猛

常规补充钙和维生素D可防治骨质疏松,进一步减少骨质疏松性骨折发病率。骨强度由骨密度和骨质量决定,骨密度由高度矿化的无机盐（钙、磷、镁等）组成,骨质量主要由有机骨基质胶原纤维组成,而胶原蛋白合成必需有微量元素参加,特别是铜、锰和锌。本文主要介绍镁、锌、铜、锰对骨质 疏松症和骨质疏松性骨折防治的作用和临床研究,提出骨质疏松性骨折防治的新概念：补充韧骨元素镁、锌、铜、锰。     

Cross‐link stabilization does not affect the response of collagen molecules,fibrils, or tendons to tensile overload

We investigated whether immature allysine‐derived cross‐links provide mechanically labile linkages by exploring the effects of immature cross‐link stabilization at three levels of collagen hierarchy: damaged fibril morphology, whole tendon mechanics, and molecular stability. Tendons from the tails of young adult steers were either treated with sodium borohydride (NaBH₄) to stabilize labile cross‐links, exposed only to the buffer used during stabilization treatment, or maintained as untreated controls. One‐half of each tendon was then subjected to five cycles of subrupture overload. Morphologic changes to collagen fibrils resulting from overload were investigated using scanning electron microscopy, and changes in the hydrothermal stability of collagen molecules were assessed using hydrothermal isometric tension testing. NaBH₄ cross‐link stabilization did not affect the response of tendon collagen to tensile overload at any of the three levels of hierarchy studied. Cross‐link stabilization did not prevent the characteristic overload‐induced mode of fibril damage that we term discrete plasticity. Similarly, stabilization did not alter the mechanical response of whole tendons to overload, and did not prevent an overload‐induced thermal destabilization of collagen molecules. Our results indicate that hydrothermally labile cross‐links may not be as mechanically labile as was previously thought. © 2013 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 31:1907–1913, 2013     

Loss of Type I Collagen Telopeptide Lysyl Hydroxylation Causes Musculoskeletal Abnormalities in a Zebrafish Model of Bruck Syndrome

Bruck syndrome (BS) is a disorder characterized by joint flexion contractures and skeletal dysplasia that shows strong clinical overlap with the brittle bone disease osteogenesis imperfecta (OI). BS is caused by biallelic mutations in either the FKBP10 or the PLOD2 gene. PLOD2 encodes the lysyl hydroxylase 2 (LH2) enzyme, which is responsible for the hydroxylation of lysine residues in fibrillar collagen telopeptides. This hydroxylation directs crosslinking of collagen fibrils in the extracellular matrix, which is necessary to provide stability and tensile integrity to the collagen fibrils. To further elucidate the function of LH2 in vertebrate skeletal development, we created a zebrafish model harboring a homozygous plod2 nonsense mutation resulting in reduced telopeptide hydroxylation and crosslinking of bone type I collagen. Adult plod2 mutants present with a shortened body axis and severe skeletal abnormalities with evidence of bone fragility and fractures. The vertebral column of plod2 mutants is short and scoliotic with compressed vertebrae that show excessive bone formation at the vertebral end plates, and increased tissue mineral density in the vertebral centra. The muscle fibers of mutant zebrafish have a reduced diameter near the horizontal myoseptum. The endomysium, a layer of connective tissue ensheathing the individual muscle fibers, is enlarged. Transmission electron microscopy of mutant vertebral bone shows type I collagen fibrils that are less organized with loss of the typical plywood‐like structure. In conclusion, plod2 mutant zebrafish show molecular and tissue abnormalities in the musculoskeletal system that are concordant with clinical findings in BS patients. Therefore, the plod2 zebrafish mutant is a promising model for the elucidation of the underlying pathogenetic mechanisms leading to BS and the development of novel therapeutic avenues in this syndrome. © 2016 American Society for Bone and Mineral Research.     

Collagen V expression is crucial in regional development of the supraspinatus tendon

Manipulations in cell culture and mouse models have demonstrated that reduction of collagen V results in altered fibril structure and matrix assembly. A tissue‐dependent role for collagen V in determining mechanical function was recently established, but its role in determining regional properties has not been addressed. The objective of this study was to define the role(s) of collagen V expression in establishing the site‐specific properties of the supraspinatus tendon. The insertion and midsubstance of tendons from wild type, heterozygous and tendon/ligament‐specific null mice were assessed for crimp morphology, fibril morphology, cell morphology, as well as total collagen and pyridinoline cross‐link (PYD) content. Fibril morphology was altered at the midsubstance of both groups with larger, but fewer, fibrils and no change in cell morphology or collagen compared to the wild type controls. In contrast, a significant disruption of fibril assembly was observed at the insertion site of the null group with the presence of structurally aberrant fibrils. Alterations were also present in cell density and PYD content. Altogether, these results demonstrate that collagen V plays a crucial role in determining region‐specific differences in mouse supraspinatus tendon structure. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:2154–2161, 2016.     

The contribution of the organic matrix to bone's material properties

Bone is a two-phase porous composite material comprised primarily of collagen and mineral, which together provide its mechanical properties. The contribution of the mineral phase to bone's mechanical properties has dominated scientific thinking. Collagen's role has been underappreciated and not very well studied. However, there is evidence that changes in collagen content, or changes to inter- and intrafibrillar collagen cross-linking, can reduce the energy required to cause bone failure (toughness), and increase fracture risk. Although collagen may have less effect on bone's strength and stiffness than does mineral, it may have a profound effect on bone fragility. Collagen changes that occur with age and reduce bone's toughness may be an important factor in the risk of fracture in older women with low bone mass.