Type I collagen production by osteoblast-like cells cultured in contact with different bioactive glasses

Bioactive glasses are silica-based, surface-active bone substitutes that have shown good biocompatibility both in bone and in soft tissue and are used in oral and maxillofacial bone augmentation. Previous in vitro studies showing that bioactive glasses support the growth and maturation of rat osteoblast-like cells and promote the expression and maintenance of the osteoblastic phenotype have suggested that there is both a solution-mediated and a surface-controlled effect on cell activity. In this study, we investigated the behavior of human primary osteoblast-like cells cultured in contact with three different bioactive glasses and compared them with amorphous silica (SiO2) used in the form of granules. The specific activity of alkaline phosphatase determined biochemically was significantly higher at 2 and 4 days on the bioactive glass with 46.1 mol % silica content (45S5 Bioglass) cultures than in the control cultures and in the bioactive gel-glass cultures, which had 60 mol % (58S) and 80 mol % (77S) silica content. Osteoblasts synthesize collagen type I, which is subsequently mineralized. Immunoblot and biochemical studies showed increased collagen release from osteoblast-like cells cultured in contact with bioactive glasses over that of controls. Among the three bioactive glasses, 45S5 is the highest inducer of osteoblast-like cell collagen release; moreover, mRNA for type I collagen was stimulated approximately three- to fivefold after 45S5 treatment. 77S bioactive glass similarly increased type I collagen synthesis even though alkaline phosphatase was not higher. These results suggest that 45S5 Bioglass not only induces osteogenic differentiation of human primary osteoblast-like cells, but can also increase collagen synthesis and release. The newly formulated bioactive gel-glass 77S seems to have potential applications for tissue engineering, inducing increased collagen synthesis.     

Surface functionalization of bioactive glasses

Different cleaning and silanization methods have been applied to bioactive glasses with the aim of covalently bonding bone morphogenetic proteins (BMP-2) to the surface. Several glasses, with different bioactivity index, were cleaned with acidic, basic, or neutral aqueous media to investigate the role of pH in the formation of silanols on glass surfaces of different reactivity. The cleaned glasses were then functionalized using 3-aminopropyl-triethoxysilane (APTS). After the optimization of the silanization procedure, proteins of different complexity were immobilized on the functionalized glasses. To optimize the protein immobilization, a model protein (carnosine) was first used, and the procedure was then used to bind human BMP-2. The glass surfaces were characterized during each step of the treatment by water contact angles and X-ray photoelectron analyses. The APTS functionalization was then used to immobilize bone morphogenetic protein on the bioactive glasses. This result suggested that such a treatment could be successfully used as an efficient alternative to systemic administration of transforming growth factors for the development of local delivery vehicle implants.     

Uptake of nickel from 316L stainless steel into contacting osteoblastic cells and metal ion interference with BMP-2-induced alkaline phosphatase

Bone cells contacting nickel (Ni)-containing implant materials may be affected by Ni species via disturbed signaling pathways involved in bone cell development. Here we analyze effects of the Ni-containing steel 316L and major metal constituents thereof on bone morphogenetic protein-2 (BMP-2)-induced alkaline phosphatase (ALP) of MC3T3-E1 cells. While cells grew normally on 316L, cellular Ni content increased 10-fold vs. control within 4 days. With respect to the major components of 316L, Ni2+ (3-50 microM) was most inhibitory to BMP-2-induced ALP, whereas even 50 microM Fe3+, Cr3+, Mo5+, or Mn2+ had no such effect. In line with this, BMP-2-induced ALP was significantly reduced in cells on 316L. This effect was not prevented by the metal ion chelator diethylenetriaminepentaacetic acid (DTPA). Instead, DTPA abolished the stimulatory effect of BMP-2 on ALP, pointing to chelatable metal ions involved. Zn2+, as one possible candidate, antagonized the Ni2+ inhibition of BMP-2-induced ALP in both MC3T3-E1 and human bone marrow stromal cells. Results show that cells contacting 316L steel are exposed to increased concentrations of Ni which suffice to impair BMP-2-induced ALP activity. Zn2+, as a competitor of this inhibition, may help to restore normal osteoblastic function and bone development under these conditions.     

Heat treatment of BMP-2 depots on implant materials generates an immobilized layer of BMP-2 with pronounced bioactivity

Bone cells seeded directly on depots of bone morphogenetic protein-2 (BMP-2) increase alkaline phosphatase (ALP) expression. Heating of such BMP-2 depots to 100 degrees C augmented the intensity of this local ALP induction. To understand this unexpected finding, we investigated the effect of heat treatment on BMP-2 depots more closely. Using a novel bioassay based on ALP-induction of remote cells, we found that the amount of released bioactive BMP-2 from heat-treated depots decays within days and could be described by an exponential function. From this function, we expected that pre-incubation of BMP-2 depots in culture medium for 4 weeks renders them insufficient to induce ALP. However, preincubated, heat-treated depots still induced maximal ALP, unless treated with the selective BMP-2 inhibitor noggin. Furthermore, heat treatment of BMP-2 depots generated a layer of immunoreactive BMP-2 at the surface of the carrier. In contrast, BMP-2 was washed off completely if heat treatment of adsorbed protein was omitted. Results show that heat treatment generates both a soluble pool of BMP-2 and a material-bound layer of BMP-2 in which the protein is protected against degradation. Therefore, heat treatment appears useful to locally immobilize BMP-2 on various implant surfaces.     

RGD-grafted thermoreversible polymers to facilitate attachment of BMP-2 responsive C2C12 cells

The purpose of this study was to design thermoreversible biomaterials for enhanced adhesion of bone morphogenetic protein-2 (BMP-2)-responsive cells. Peptides containing the arginine-glycine-aspartic acid (RGD) sequence were conjugated to N-isopropylacrylamide (NiPAM) polymers via amine-reactive N-acryloxysuccinimide (NASI) groups. In monolayer cultures, the adhesion of BMP-2-responsive C2C12 cells to RGD-grafted NiPAM/NASI surfaces was significantly higher than adhesion on ungrafted NiPAM/NASI surfaces. Although the morphology of cells adhered to RGD-grafted NiPAM/NASI surfaces was comparable to cells adhered on tissue culture polystyrene (TCPS), long-term cell growth was limited on the NiPAM/NASI surfaces, even for RGD-grafted surfaces. Treatment of C2C12 cells with recombinant BMP-2 induced dose-dependent osteoblastic differentiation as assessed by alkaline phosphatase (ALP) activity. In the absence of BMP-2, cells cultured on NiPAM/NASI polymers (either grafted with RGD peptide or not) expressed significantly higher levels of ALP activity than the cells cultured on TCPS, indicating that the polymer surfaces induced some osteoblastic activity in C2C12 cells without the need for BMP-2. We conclude that NiPAM-based thermoreversible biomaterials, despite their limited ability to support cell growth, allowed an enhanced expression of the chosen osteogenic marker (ALP) by C2C12 cells in vitro.     

Retention and activity of BMP-2 in hyaluronic acid-based scaffolds in vitro.

Bone morphogenetic protein-2 (BMP-2) delivered in a suitable implantable matrix has the potential to repair local skeletal defects by inducing new bone formation from undifferentiated pluripotent stem cells resident in host tissue. In this study, we examined in vitro the potential of a derivatized hyaluronic acid (Hyaff-11) scaffold as a delivery vehicle for recombinant human BMP-2 (rhBMP-2) in bone and cartilage repair therapies. Hyaff-11 scaffolds were fabricated using a phase inversion/particulate leaching method and soak-loaded with rhBMP-2. In vitro release kinetics of rhBMP-2, demonstrated using enzyme-linked immunosorbant assay and alkaline phosphatase (ALP) assay revealed a slow, sustained rhBMP-2 release during 28 days, with a cumulative release of 31.82% of the initial rhBMP-2 loaded. rhBMP-2 was released in bioactive form as demonstrated by ALP induction of pluripotent cell line, C3H10T1/2 (T1/2), down the osteoblast lineage when incubated with the release supernatants. rhBMP-2 retention in Hyaff-11 scaffolds was greater than that from collagen gels, which released most of the initially loaded rhBMP-2 by 14 days. rhBMP-2-loaded Hyaff-11 scaffolds were also seeded with T1/2 cells and evaluated at 3, 7, 14, and 28 days for viability and expression of osteoblast phenotype. Cells remained viable throughout the study and expressed a time- and dose-dependent ALP and osteocalcin expression in the rhBMP-2 groups. Based on these observations, Hyaff-11 scaffolds may be suitable delivery systems for rhBMP-2 in bone/cartilage repair because of their ability to retain rhBMP-2, release low levels of bioactive rhBMP-2 to the local environment in a sustained manner, and stimulate differentiation of pluripotent stem cells.     

Molecular biological evaluation of bioactive glass microspheres and adjunct bone morphogenetic protein 2 gene transfer in the enhancement of new bone formation

Bioactive glass is a promising osteoconductive silica-based biomaterial for guidance of new bone growth. On the basis of several in vitro studies, the material appears able to promote osteoblast functions. In our in vivo study, the osteopromotive effect of bioactive glass microspheres seemed to surpass the osteoinductive action of direct adenovirus-mediated human bone morphogenetic protein 2 (BMP-2) gene transfer in a noncritical size bone defect model. The current study was initiated to elucidate the molecular mechanism behind bioactive glass action with or without adjunct BMP-2 gene transfer. A standardized bone defect of the rat tibia was filled with bioactive glass microspheres and injected with adenovirus carrying the human BMP-2 gene (RAdBMP-2). Control defects were left empty or filled with bioactive glass microspheres with injection of adenovirus carrying the lacZ reporter gene or saline. Quantitative polymerase chain reaction confirmed the expression of the transferred human BMP-2 gene at the defect area at 4 days, but not in intact reference tissues. Bone matrix components (collagens I, II, and III, osteocalcin, osteonectin, and osteopontin) and resorption markers (cathepsin K and MMP-9), determined by Northern analysis, showed a completely different pattern of gene expression in defects filled with bioactive glass compared with control defects left to heal without filling. Bioactive glass induced a long-lasting production of bone matrix with concurrent upregulation of osteoclastic markers, a sign of high bone turnover. Combining RAdBMP-2 gene transfer with bioactive glass decelerated the high turnover, but did not influence the balance of synthesis and resorption. This molecular analysis confirmed not only the highly osteopromotive effect of bioactive glass microspheres, but also the accelerated rate of new bone resorption on its surface. At least in noncritical size defects this impact of bioactive glass seems to saturate new bone formation on its surface and thereby overshadow the effect of BMP-2 gene transfer.     

Cultivation of MC3T3-E1 cells on a newly developed material (Sponceram) using a rotating bed system bioreactor

The influence of a 3D macroporous scaffold (Sponceram) on the differentiation process into bone cells was investigated under static conditions in cell culture dishes. Furthermore, cultivations were performed using a new bioreactor system in the presence or absence of bone morphogenetic protein 2 (BMP-2). Preosteoblastic MC3T3-E1 cells were first cultured on Sponceram scaffolds in 96-well dishes using standard medium, differentiation medium and BMP-2 medium. Cell proliferation showed a similar course for all conditions used. Alkaline phosphatase (AP) activity resulted in a maximum at day 5 in the presence of BMP-2. Two bioreactor cultivations were performed in a BIOSTAT Bplus RBS (rotating bed system) 500 on Sponceram carrier discs. One cultivation was performed using standard medium. The second one was used with the same medium with BMP-2 substituted. Significant calcification of the extracellular matrix in the presence of BMP-2 occurred but even in the absence of BMP-2 mineralization was observed. mRNA expression of collagen I, osteocalcin and bone sialoprotein was detected after both reactor cultivations. This study demonstrates that macroporous Sponceram is suitable for the cultivation and differentiation of MC3T3-E1 cells into the osteoblastic phenotype. The results of the bioreactor cultivation revealed that the scaffold promoted the differentiation process even in the absence of BMP-2.     

Effect of rapidly resorbable bone substitute materials on the temporal expression of the osteoblastic phenotype in vitro

Ideally, bioactive ceramics for use in alveolar ridge augmentation should possess the ability to activate bone formation and, thus, cause the differentiation of osteoprogenitor cells into osteoblasts at their surfaces. Therefore, in order to evaluate the osteogenic potential of novel bone substitute materials, it is important to examine their effect on osteoblastic differentiation. This study examines the effect of rapidly resorbable calcium-alkali-orthophosphates on osteoblastic phenotype expression and compares this behavior to that of beta-tricalcium phosphate (TCP) and bioactive glass 45S5. Test materials were three materials (denominated GB14, GB9, GB9/25) with a crystalline phase Ca(2)KNa(PO(4))(2) and with a small amorphous portion containing either magnesium potassium phosphate (GB14) or silica phosphate (GB9 and GB9/25, which also contains Ca(2)P(2)O(7)); and a material with a novel crystalline phase Ca(10)[K/Na](PO(4))(7) (material denominated 352i). SaOS-2 human bone cells were grown on the substrata for 3, 7, 14, and 21 days, counted, and probed for an array of osteogenic markers. GB9 had the greatest stimulatory effect on osteoblastic proliferation and differentiation, suggesting that this material possesses the highest potency to enhance osteogenesis. GB14 and 352i supported osteoblast differentiation to the same or a higher degree than TCP, whereas, similar to bioactive glass 45S5, GB9/25 displayed a greater stimulatory effect on osteoblastic phenotype expression, indicating that GB9/25 is also an excellent material for promoting osteogenesis.     

In vitro evaluation of an injectable chitosan gel for sustained local delivery of BMP-2 for osteoblastic differentiation

We investigated the effect of sustained release of bone morphogenetic protein-2 (BMP-2) from an injectable chitosan gel on osteoblastic differentiation in vitro. We first characterized the release profile of BMP-2 from the gels, and then examined the cellular responses of preosteoblast mouse stromal cells (W-20-17) and human embryonic palatal mesenchymal (HEPM) cells to BMP-2. The release profiles of different concentrations of BMP-2 exhibited sustained releases (41% for 2 ng/mL and 48% for 20 ng/mL, respectively) from the chitosan gels over a three-week period. Both cell types cultured in the chitosan gels were viable and significantly proliferated for 3 days (p < 0.05). Chitosan gels loaded with BMP-2 enhanced ALP activity of W-20-17 by 3.6-fold, and increased calcium mineral deposition of HEPM by 2.8-fold at 14 days of incubation, compared to control groups initially containing the same amount of BMP-2. In addition, schitosan gels loaded with BMP-2 exhibited significantly greater osteocalcin synthesis of W-20-17 at seven days, and of HEPM at both 7 and 14 days compared with the control groups (p<0.05). This study suggests that the enhanced effects of BMP-2 released from chitosan gels on cell differentiation and mineralization are species and cell type dependent.     

Effect of nicotine in matrix mineralization by human bone marrow and Saos-2 cells cultured on the surface of plasma-sprayed titanium implants

Smoking has an established negative impact in the clinical outcome of dental implants. This work analyses the response of human osteoblastic cells to nicotine, at the surface of plasma-sprayed commercial titanium implants. Human bone marrow (HBM) and Saos-2 cells, seeded on the surface of titanium implants and cultured in experimental conditions favoring osteoblastic differentiation, were exposed continuously to nicotine (0.0001 to 0.5 mg mL(-1)) and characterized for cell proliferation and function. Exposure of HBM cells resulted in increased cell proliferation, higher alkaline phosphatase (ALP) activity, and earlier onset of matrix mineralization at levels up to 0.2 mg mL(-1), an initial inhibitory effect in cell growth and functional activity followed by a recovery in the presence of 0.3 mg mL(-1) and a dose-dependent deleterious effect at higher levels. By contrast, exposure to nicotine did not affect cell proliferation of Saos-2 cells at levels up to 0.2 mg mL(-1), and caused only a small positive effect in ALP activity in the presence of 0.05 and 0.1 mg mL(-1); however, matrix mineralization by Saos-2 cells also occurred earlier in the cultures exposed to levels of nicotine up to 0.1 mg mL(-1). Higher concentrations caused dose-dependent inhibitory effects. Considering the high diffusion potential of nicotine, results suggest a local role of nicotine in modulating bone formation events at the implant surface.     

Enhanced bioactivity of bone morphogenetic protein-2 with low dose of 2-N, 6-O-sulfated chitosan in vitro and in vivo

Bone morphogenetic protein-2 (BMP-2) has been widely used as an effective growth factor in bone tissue engineering. However, large amounts of BMP-2 are required to induce new bone and the resulting side effects limit its clinical application. Sulfated polysaccharides, such as native heparin, and heparan sulfate have been found to modulate BMP-2 bioactivity and play pivotal roles in bone metabolism. Whereas the direct role of chitosan modified with sulfate group in BMP-2 signaling has not been reported till now. In the present study, several sulfated chitosans with different positions were synthesized by regioselective reactions firstly. Using C2C12 myoblast cells as in vitro models, the enhanced bioactivity of BMP-2 was attributed primarily to the stimulation from 6-O-sulfated chitosan (6SCS), while 2-N-sulfate was subsidiary group with less activation. Low dose of 2-N, 6-O-sulfated chitosan (26SCS) showed significant enhancement on the alkaline phosphatase (ALP) activity and the mineralization formation induced by BMP-2, as well as the expression of ALP and osteocalcin mRNA. Moreover, increased chain-length and further sulfation on 26SCS also resulted in a higher ALP activity. Dose-dependent effects on BMP-2 bioactivity were observed in both sulfated chitosan and heparin. Compared with native heparin, 26SCS showed much stronger simultaneous effects on the BMP-2 bioactivity at low dose. Stimulated secreted Noggin protein failed to block the function of BMP-2 in the presence of 26SCS. The BMP-2 ligand bound to its receptor was enhanced by low dose of 26SCS, whereas weakened by the increasing amounts of 26SCS. Furthermore, simultaneous administration of BMP-2 and 26SCS in vivo dose-dependently induced larger amounts of ectopic bone formation compared with BMP-2 alone. These findings clearly indicate that 26SCS is a more potent enhancer for BMP-2 bioactivity to induce osteoblastic differentiation in vitro and in vivo by promoting BMP-2 signaling pathway, suggesting that 26SCS could be used as the synergistic factor of BMP-2 for bone regeneration.     

In vivo bone formation following transplantation of human adipose-derived stromal cells that are not differentiated osteogenically

A number of studies have shown in vivo bone regeneration by transplantation of osteogenic cells differentiated in vitro from adipose-derived stromal cells (ADSCs). However, the in vitro osteogenic differentiation process requires an additional culture period, and the dexamethasone that is generally used in the process may be cytotoxic. Here, we tested the hypothesis that ADSCs that are not differentiated osteogenically in vitro prior to transplantation would extensively regenerate bone in vivo when exogenous bone morphogenetic protein-2 (BMP-2) is delivered to the transplantation site. We fabricated a poly(dl-lactic-co-glycolic acid)/hydroxyapatite (PLGA/HA) composite scaffold with osteoactive HA that is highly exposed on the scaffold surface. This scaffold was able to release BMP-2 over a 4-week period in vitro. Human ADSCs cultured on BMP-2-loaded PLGA/HA scaffolds for 2 weeks differentiated toward osteogenic cells expressing alkaline phosphatase (ALP), osteopontin (OPN), and osteocalcin (OCN) mRNA, while cells on PLGA/HA scaffolds without BMP-2 expressed only ALP. To study in vivo bone formation, PLGA/HA scaffolds (group 1), BMP-2-loaded PLGA/HA scaffolds (group 2), undifferentiated ADSCs seeded on PLGA/HA scaffolds (group 3), and undifferentiated ADSCs seeded on BMP-2-loaded PLGA/HA scaffolds (group 4) were implanted into dorsal, subcutaneous spaces of athymic mice. Eight weeks after implantation, group 4 exhibited a 25-fold greater bone formation area and 5-fold higher calcium deposition than group 3. Bone regeneration by transplanted human ADSCs in group 4 was confirmed by expression of human-specific osteoblastic genes, ALP, collagen type I, OPN, OCN, and bone sialoprotein, while group 3 expressed much lower levels of collagen type I and OPN mRNA only. This study demonstrates the feasibility of extensive in vivo bone regeneration by transplantation of ADSCs without prior in vitro osteogenic differentiation, and that a PLGA/HA composite BMP-2 delivery system stimulates bone regeneration following transplantation of undifferentiated human ADSCs.     

RUNX2 expression in developing human bones and various bone tumors

The heterozygous germline mutation of runt-related protein 2 (RUNX2) causes cleidocranial dysplasia. To clarify the involvement of RUNX2 in human osteogenesis, fetal bones and various bone tumors were immunohistochemically examined. During both membranous and endochondral ossification in the fetus (n= 8), RUNX2 was expressed not only in osteoblastic cells but also in surrounding mesenchymal cells and early stage chondrocytes. Such an expression pattern was recapitulated in bone tumors: RUNX2 was unequivocally expressed in osteosarcoma (n= 20) and fibrous dysplasia (n= 10), regardless of the site of occurrence, cell morphology or amount of neoplastic osteoid. RUNX2 expression was limited to less differentiated cells in chondrogenic tumors (n= 20). We further analyzed whether RUNX2 expression was regulated by bone morphogenetic protein-2 (BMP-2), which is critical for osteoblastic differentiation. With real-time polymerase chain reaction, the RUNX2 mRNA level was correlated with BMP-2 mRNA level, and both levels were significantly higher in three osteosarcoma cell lines than in three chondrosarcoma cell lines. With treatment of recombinant BMP-2, the RUNX2 mRNA level was significantly altered in these cell lines. RUNX2 expression is constitutive in developing and neoplastic human osteogenesis, and is most likely to be regulated by BMP-2.     

Enhancement of ectopic bone formation by bone morphogenetic protein-2 released from a heparin-conjugated poly(L-lactic-co-glycolic acid) scaffold

In this study, a heparin-conjugated poly(l-lactic-co-glycolic acid) (HP-PLGA) scaffold was developed for the sustained delivery of bone morphogenetic protein-2 (BMP-2), and then used to address the hypothesis that BMP-2 delivered from this scaffold could enhance ectopic bone formation. We found the amount of heparin conjugated to the PLGA scaffolds could be increased up to 3.2-fold by using scaffolds made from star-shaped PLGA, as compared to scaffolds made from linear PLGA, and that the release of BMP-2 from the HP-PLGA scaffold was sustained for at least 14 days in vitro. The BMP-2 released from the HP-PLGA scaffold stimulated an increase in alkaline phosphatase (ALP) activity of osteoblasts for 14 days in vitro, suggesting that the HP-PLGA scaffold delivery system releases BMP-2 in a bioactive form for a prolonged period. By contrast, BMP-2 release from unmodified (no heparin) PLGA scaffolds induced a transient increase in ALP activity for the first 3 days and a decrease thereafter. In vivo bone formation studies showed the BMP-2-loaded HP-PLGA scaffolds induced bone formation to a much greater extent than did either BMP-2-loaded unmodified PLGA scaffolds or unloaded (no BMP-2) HP-PLGA scaffolds, with 9-fold greater bone formation area and 4-fold greater calcium content in the BMP-2-loaded HP-PLGA scaffold group compared to the BMP-2-loaded unmodified PLGA scaffold group. Collectively, these results demonstrate that the HP-PLGA delivery system is capable of potentiating the osteogenic efficacy of BMP-2, and underscore its importance as a possible bone regeneration strategy.     

IRAK-4对成骨细胞分化BMP-Smad通道的影响

目的　探讨白细胞介素-l受体相关激酶-4对成骨细胞分化过程BMP-Smad通道的影响。 方法　 C2C12细胞是肌卫星细胞,不同培养条件下有不同分化潜能。它可分化为成骨细胞,是研究体外成骨细胞分化的理想模型。C2C12细胞培养于培养板中,随机分为3组,每组加入不同培养物,模拟干细胞向成骨细胞分化过程中受到的不同刺激。检测ALP活性、Smad1 mRNA、P-Smad1蛋白表达,观察不同刺激对成骨细胞分化的影响。 结果　与正常对照组比较,BMP-2组ALP活性明显增加,与BMP-2组比,BMP2+IRAK-4siRNA转染组ALP活性增加,BMP2+IRAK-4siRNA转染组和BMP-2组比Smadl 　mRNA的表达只是轻微增加,P-Smad1蛋白表达明显增加。 结论　BMP-2可增强C2C12细胞成骨化,IRAK-4可抑制C2C12细胞被BMP-2诱导的成骨化,其机制可能是通过减弱BMP-Smad通道中Smad1磷酸化水平实现的。     

Carrier dependent cell differentiation of bone morphogenetic protein-2 induced osteogenesis and chondrogenesis during the early implantation stage in rats

To evaluate the osteoinductive effects of recombinant human bone morphogenetic protein (rhBMP)-2 during the early stages of rat ectopic bone formation, we prepared two distinct carriers. Two carriers, insoluble bone matrix (IBM) and fibrous glass membrane (FGM) were combined with rhBMP-2 and implanted into the backs of rats to evaluate the osteoinductive effects of the two rhBMP-2 carrier systems. Insoluble bone matrix particle size was 320 to 620 microm. Fibrous glass membrane was constructed from unwoven glass fibers 1 microm in diameter. Alkaline phosphatase (ALP) activity and type II collagen were detected in IBM/rhBMP-2 at 5 days postimplantation. Calcium (Ca) was also detected in IBM/rhBMP-2 at 7 and 9 days postimplantation. In contrast, ALP and type II collagen were detected in FGM/rhBMP-2 at 7 days. Calcium was undetected, indicating that the bone formation in IBM/rhBMP-2 proceeded faster than in FGM/rhBMP-2 during the early stage of BMP-induced osteogenesis. In addition, mRNA expression level of KDR, a receptor for vascular endothelial growth factor, was also increased in IBM/rhBMP-2. To investigate the in vivo release profile of rhBMP-2, iodine 125 ((125)I)-labeled BMP-2-incorporating IBM and FGM implants were inserted into the back subcutis of mice. More than 60% of the rhBMP-2 was released from the IBM/rhBMP-2 carrier within 1 day after implantation, whereas 50% of the rhBMP-2 was released from the FGM/rhBMP-2 10 days postimplantation. These results indicated that osteo- and chondrogenesis depends highly upon the geometry of the carrier and the in situ retention of rhBMP-2 during the early stage of rhBMP-2 induced bone formation.     

Titanium substrata composition influences osteoblastic phenotype: In vitro study.

In spite of observed differences at the interface between boon and either commercially pure titanium [Ti(cpi)] or titanium alloy (Ti-6Al-4V), the mechanism of such a response is ill understood. This prompted further investigation of the influence of similar metals on human bone-derived cells (HBDCs). This study investigated the influence of Ti(cpi) and its alloy on osteoblastic proteins formed by HBDCs grown for 5, 7, 10, and 14 days on these metals and compared them to cells grown on tissue culture polystyrene plates. Messenger RNA and translated proteins that form an array of osteogenic parameters were determined: alkaline phosphatase (ALP), thrombospondin, osteopontin, osteocalcin (OC), osteonectin (ON/SPARC), type I collagen (Col I) and bone sialoprotein (BSP). At the four predetermined time points, cells grown on either Ti(cpi) or Ti-6Al-4V generally expressed similar mRNA levels, while levels of their respective proteins differed. Cells on Ti(cpi) had peak levels for most proteins at day 7, whereas those on Ti-6Al-4V peaked at either day 5 and/or day 7. At day 5 cells grown on Ti-6Al-4V had higher levels of ALP, Col I, ON/SPARC, OC, and BSP than those in Ti(cpi); this difference was not maintained at later time points in culture. The differential regulation of proteins occurring between cells from the same patient grown on titanium and its alloy implies that HBDCs respond to small differences in the surface chemistry and/or microcrystallinity.