腕关节部分融合治疗退行性腕关节炎的疗效

目的评价头骨、月骨、三角骨及钩骨四关节融合治疗退行性腕关节炎的效果。方法1997年7月～2002年12月应用腕关节部分融合术创伤性腕关节炎治疗20例,术后随访15个月,随访检查包括术后腕关节疼痛程度、腕关节活动度、握力以及患侧X线检查。视觉模拟评分法评价疼痛程度。腕关节总体功能评价采用Krimmer腕关节评分表。结果腕疼痛值静息时为2.1,用力后为5.3;屈伸活动度为64°(对侧126°);尺桡偏为30°(对侧57°);平均握力为24kg(对侧40kg)。Krimmer腕关节评分值为67。X线检查头、月、三角及钩骨均融合。结论腕关节部分融合后能保存腕关节部分功能,是治疗退行性腕关节炎有效的方法。     

Partial arthrodesis of the wrist: An investigation in cadavers

Partial arthrodesis of the wrist was performed on six cadavers in order to study the residual excursion of the wrist. Arthrodesis between the radius and scaphoid left 40 per cent extension/flexion and 61 per cent radial/ulnar deviation. Arthrodesis between the radius, scaphoid and lunate left 36 per cent extension/flexion and 59 per cent radial/ulnar deviation. Arthrodesis between the capitate, scaphoid and lunate left 59 per cent extension/flexion and 91 per cent radial/ulnar deviation.     

Canine carpal joint fusion: a model for four-corner arthrodesis using a porous tantalum implant

PURPOSE: Interest has focused on porous materials that promote bony ingrowth. In this study a porous tantalum implant was used as an adjunct to intercarpal stabilization in a canine model of wrist arthrodesis. METHODS: A defect was created at the junction of the radiocarpal, ulnocarpal, and fourth carpal bones, analogous to a four-corner fusion site in humans. A tantalum cylinder was press-fit and stabilized with K-wires. Controls were represented by creating the defect without implant placement. Animals were killed at 4, 8, and 12 weeks. RESULTS: Histology showed bony ingrowth as early as 4 weeks and mechanical testing showed a statistically significant increase in strength of the construct over time. Controls failed to achieve union at any time point. CONCLUSIONS: The implant served as an adjunct to stabilization of the carpus in this model of four-corner fusion, suggesting a novel application of this material in conditions in which bone graft has been required previously. This study represents a preliminary investigation of the use of a tantalum device for intercarpal stabilization; it does not compare this technique with conventional methods.     

Complications and outcome of four-corner arthrodesis: circular plate fixation versus traditional techniques

PURPOSE: To review the clinical and radiographic results of scaphoid excision and four-corner arthrodesis using a circular plate and screws compared with traditional fusion techniques (wires, staples, screws). METHODS: Fifty-eight patients with four-corner arthrodesis (plate fixation, n = 27; traditional fixation, n = 31) were evaluated for radiographic and clinical success using wrist radiographs and functional assays. Patients were subjectively surveyed using the standardized Disabilities of the Arm, Shoulder, and Hand questionnaire and classification scales for pain and satisfaction. Objective measurements included grip-strength and range-of-motion measurements. RESULTS: Radiographic analysis showed 26% nonunion with loose hardware in the plate group compared with 3% in the traditional group and 22% hardware impingement in the plate group compared with 3% in the traditional group. Clinical evaluation yielded a mean grip strength of 31 kg (70% of opposite side) for plate fixation and 33 kg (79% of opposite side) for traditional fixation. The mean flexion-extension arc was 48% and 50% of the opposite wrist for plate and traditional patients, respectively. The mean adjusted Disabilities of the Arm, Shoulder, and Hand questionnaire scores were 27 out of 100 for plate patients and 8 out of 100 for traditional patients. Pain classification scores showed that only 2 patients in the plate group were pain free whereas there were 8 patients in the traditional group who were pain free. Overall patient satisfaction was 60% for the plate group whereas the traditional patient group reported 100% satisfaction. CONCLUSIONS: The rate of major complications (nonunion or impingement) was much greater with circular plate fixation (48%) versus traditional fixation techniques (6%). With the plate procedure the grip strength and arc of motion decreased approximately 30% and 52%, respectively, compared with decreases of 21% and 50%, respectively, for traditional fusion methods. Additionally, subjective patient dissatisfaction was 40% in the plate group compared with 0% in the traditional group. We postulate that the increased complication and dissatisfaction rates associated with plate fixation may be attributable to possible biomechanical imperfections or increased technical demands with this fusion system.     

Technique for Failed Total Wrist Arthroplasty Conversion to a Total Wrist Arthrodesis with Allograft Interposition

The frequency of prosthetic total wrist arthroplasty continues to increase. With this increase comes the expected subsequent increase in need for revision or salvage procedures. The technique presented here involves the use of a cortical allograft interposition graft to restore bone stock and length for failed total wrist arthroplasty.     

Minimally invasive ankle arthrodesis with a retrograde locking nail after failed fusion

Abstract A retrograde nail with posterior-to-anterior (PA) locking into os calcis, talus and tibia was used to correct deformity and achieve fusion after failed fusion. A variety of methods have been published to achieve union of the ankle and subtalar joint in a failed fusion situation. We have studied a retrograde locking nail technique through a 2.5-cm incision in the non-weightbearing part of the sole of the foot. Remaining cartilage in the ankle joint, where necessary, was percutaneously removed through an anterior approach and the locking nail was inserted after reaming of os calcis, talus and tibia. Locking screw insertion was in the sagittal plane (p.a. direction), in talus os calcis and tibial diaphysis using a nail mounted jig. Ten patients were entered in the study (age 27-60 years). The initial aetiology for attempted fusion was post-traumatic in nine cases and rheumatic in one case. There were 25 previous operations in the cohort not leading to fusion. An additional temporary external fixator was used in four cases to reach and maintain the optimum position for the procedure. The intervention time was 30-75 min. Dynamisation of the nail was performed after four months under local anaesthesia. The mean duration of follow-up was 4 years (3-5.5 years). Radiologically and clinically, fusion was achieved in 16 weeks (range, 12-20 weeks). There was no loosening of the implant or implant failure. A leg length discrepancy was avoided using this technique. There was one complication with varus malunion in a heavy smoker which united after corrective osteotomy, revision nailing and bone grafting. Patient satisfaction was measured on a scale (not visual analogue) of 0 (not satisfied) to 10 (completely satisfied); overall satisfaction averaged 9.5 points (range, 6-10 points). The postoperative ankle-hindfoot score of the American Orthopedic Foot and Ankle Society averaged 73.5 points (range, 61-81 points). Retrograde locked nailing with locking in the sagittal plane is a reliable minimally invasive procedure to achieve fusion of the ankle and the subtalar joint after failed fusion.     

First metatarsophalangeal fusion using joint specific dorsal plate with interfragmentary screw augmentation: Clinical and radiological outcomes

Background

This study reports the outcome of a plating system for arthrodesis of the first metatarsophalangeal joint (1st MTPJ) that incorporates a lag compression screw within a low profile titanium plate with a predetermined contour. This is the first report of the outcomes of this implant from a non-affiliated centre.

Wrist arthrodesis with the AO titanium wrist fusion plate: a consecutive series of 42 cases

In a 4 year period (1996-1999), 42 total wrist fusions in 25 men and 17 women were performed using the AO/ASIF Titanium wrist fusion plate. The median age of the patients at the time of surgery was 41 (range, 19-72) years. The indication for fusion was post-traumatic arthritis in 29 wrists, Kienb?ck's disease in eight, rheumatoid arthritis in three, mono-arthritis in one and Volkmann's contracture in one. All patients were reviewed at a median follow-up of 23 (range, 6-50) months. The Buck-Gramcko and Lohmann score for functional evaluation was excellent in 35, good in 5 and satisfactory in 2 patients. We conclude that wrist arthrodesis with the AO/ASIF Titanium wrist fusion plate is an excellent option for treatment of various painful disorders of the wrist.     

Anterior ulnohumeral compression plate arthrodesis for revision complex elbow injury: a case report

Elbow arthrodesis can be used for complex elbow injuries that are complicated or fail other conventional treatment methods. We present a case report of an anterior ulnohumeral compressive plate elbow arthrodesis for a patient with a complex elbow injury from a gunshot wound that failed initial open reduction and internal fixation and posterior ulnohumeral arthrodesis secondary to numerous complications.