Physicochemical Characterization and Dissolution Study of Solid Dispersions of Lovastatin with Polyethylene Glycol 4000 and Polyvinylpyrrolidone K30

Solid dispersions in water-soluble carriers have attracted considerable interest as a means of improving the dissolution rate, and hence possibly bioavailability, of a range of hydrophobic drugs. The aim of the present study was to improve the solubility and dissolution rate of a poorly water-soluble drug, Lovastatin, by a solid dispersion technique. Solid dispersions were prepared by using polyethylene glycol 4000 (PEG 4000) and polyvinylpyrrolidone K30 (PVP K30) in different drug-to‐carrier ratios. Dispersions with PEG 4000 were prepared by fusion-cooling and solvent evaporation, whereas dispersions containing PVP K30 were prepared by solvent evaporation technique. These new formulations were characterized in the liquid state by phase solubility studies and in the solid state by differential scanning calorimetry, X-ray powder diffraction, and FT-IR spectroscopy. The aqueous solubility of Lovastatin was favored by the presence of both polymers. The negative values of the Gibbs free energy and enthalpy of transfer explained the spontaneous transfer from pure water to the aqueous polymer environment. Solid-state characterization indicated Lovastatin was present as amorphous material and entrapped in polymer matrix. In contrast to the very slow dissolution rate of pure Lovastatin, the dispersion of the drug in the polymers considerably enhanced the dissolution rate. This can be attributed to improved wettability and dispersibility, as well as decrease of the crystalline and increase of the amorphous fraction of the drug. Solid dispersion prepared with PVP showed the highest improvement in wettability and dissolution rate of Lovastatin. Even physical mixture of Lovastatin prepared with both polymers also showed better dissolution profile than that of pure Lovastatin. Tablets containing solid dispersion prepared with PEG and PVP showed significant improvement in the release profile of Lovastatin compared with tablets containing Lovastatin without PEG or PVP.     

Physicochemical characterization and dissolution study of solid dispersions of Lovastatin with polyethylene glycol 4000 and polyvinylpyrrolidone K30

Solid dispersions in water-soluble carriers have attracted considerable interest as a means of improving the dissolution rate, and hence possibly bioavailability, of a range of hydrophobic drugs. The aim of the present study was to improve the solubility and dissolution rate of a poorly water-soluble drug, Lovastatin, by a solid dispersion technique. Solid dispersions were prepared by using polyethylene glycol 4000 (PEG 4000) and polyvinylpyrrolidone K30 (PVP K30) in different drug-to-carrier ratios. Dispersions with PEG 4000 were prepared by fusion-cooling and solvent evaporation, whereas dispersions containing PVP K30 were prepared by solvent evaporation technique. These new formulations were characterized in the liquid state by phase solubility studies and in the solid state by differential scanning calorimetry, X-ray powder diffraction, and FT-IR spectroscopy. The aqueous solubility of Lovastatin was favored by the presence of both polymers. The negative values of the Gibbs free energy and enthalpy of transfer explained the spontaneous transfer from pure water to the aqueous polymer environment. Solid-state characterization indicated Lovastatin was present as amorphous material and entrapped in polymer matrix. In contrast to the very slow dissolution rate of pure Lovastatin, the dispersion of the drug in the polymers considerably enhanced the dissolution rate. This can be attributed to improved wettability and dispersibility, as well as decrease of the crystalline and increase of the amorphous fraction of the drug. Solid dispersion prepared with PVP showed the highest improvement in wettability and dissolution rate of Lovastatin. Even physical mixture of Lovastatin prepared with both polymers also showed better dissolution profile than that of pure Lovastatin. Tablets containing solid dispersion prepared with PEG and PVP showed significant improvement in the release profile Lovastatin compared with tablets containing Lovastatin without PEG or PVP.     

Dissolution Improvement of Atorvastatin Calcium using Modified Locust Bean Gum by the Solid Dispersion Technique

The present research was aimed at the enhancement of the dissolution rate of atorvastatin calcium by the solid dispersion technique using modified locust bean gum. Solid dispersions (SD) using modified locust bean gum were prepared by the modified solvent evaporation method. Other mixtures were also prepared by physical mixing, co-grinding, and the kneading method. The locust bean gum was subjected to heat for modification. The prepared solid dispersions and other mixtures were evaluated for equilibrium solubility studies, content uniformity, FTIR, DSC, XRD, in vitro drug release, and in vivo pharmacodynamic studies. The equilibrium solubility was enhanced in the solid dispersions (in a drug:polymer ratio of 1:6) and other mixtures such as the co-grinding mixture (CGM) and kneading mixture (KM). Maximum dissolution rate was observed in the solid dispersion batch SD3 (i.e. 50% within 15 min) with maximum drug release after 2 h (80%) out of all solid dispersions. The co-grinding mixture also exhibited a significant enhancement in the dissolution rate among the other mixtures. FTIR studies revealed the absence of drug-polymer interaction in the solid dispersions. Minor shifts in the endothermic peaks of the DSC thermograms of SD3 and CGM indicated slight changes in drug crystallinity. XRD studies further confirmed the results of DSC and FTIR. Topological changes were observed in SEM images of SD3 and CGM. In vivo pharmacodynamic studies indicated an improved efficacy of the optimized batch SD3 as compared to the pure drug at a dose of 3 mg/kg/day. Modified locust bean gum can be a promising carrier for solubility enhancement of poorly water-soluble drugs. The lower viscosity and wetting ability of MLBG, reduction in particle size, and decreased crystallinity of the drug are responsible for the dissolution enhancement of atorvastatin. The co-grinding mixture can be a good alternative to solid dispersions prepared by modified solvent evaporation due to its ease of preparation and significant improvement in dissolution characteristics.     

Characteristics of rofecoxib-polyethylene glycol 4000 solid dispersions and tablets based on solid dispersions

The aim of this work was to report the properties of rofecoxib-PEG 4000 solid dispersions and tablets prepared using rofecoxib solid dispersions. Rofecoxib is a poorly water soluble nonsteroidal anti-inflammatory drug with a poor dissolution profile. This work investigated the possibility of developing rofecoxib tablets, allowing fast, reproducible, and complete rofecoxib dissolution, by using rofecoxib solid dispersion in polyethylene glycol (PEG) 4000. Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the solid state of solid dispersions. The effect of PEG 4000 concentration on the dissolution rate of rofecoxib from its solid dispersions was investigated. The dissolution rate of rofecoxib from its solid dispersions increased with an increasing amount of PEG 4000. The extent of dissolution rate enhancement was estimated by calculating the mean dissolution time (MDT) values. The MDT of rofecoxib decreased significantly after preparing its solid dispersions with PEG 4000. The FTIR spectroscopic studies showed the stability of rofecoxib and absence of well-defined rofecoxib-PEG 4000 interaction. The DSC and XRD studies indicated the amorphous state of rofecoxib in solid dispersions of rofecoxib with PEG 4000. SEM pictures showed the formation of effective solid dispersions of rofecoxib with PEG 4000 since well-defined change in the surface nature of rofecoxib and solid dispersions were observed. Solid dispersions formulation with highest drug dissolution rate (rofecoxib: PEG 4000 1:10 ratio) was used for the preparation of solid dispersion-based rofecoxib tablets by the direct compression method. Solid dispersion-based rofecoxib tablets obtained by direct compression, with a hardness of 8.1 Kp exhibited rapid drug dissolution and produced quick anti-inflammatory activity when compared to conventional tablets containing pure rofecoxib at the same drug dosage. This indicated that the improved dissolution rate and quick anti-inflammatory activity of rofecoxib can be obtained from its solid dispersion-based oral tablets.     

Characteristics of Rofecoxib-Polyethylene Glycol 4000 Solid Dispersions and Tablets Based on Solid Dispersions

The aim of this work was to report the properties of rofecoxib-PEG 4000 solid dispersions and tablets prepared using rofecoxib solid dispersions. Rofecoxib is a poorly water soluble nonsteroidal anti-inflammatory drug with a poor dissolution profile. This work investigated the possibility of developing rofecoxib tablets, allowing fast, reproducible, and complete rofecoxib dissolution, by using rofecoxib solid dispersion in polyethylene glycol (PEG) 4000. Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the solid state of solid dispersions. The effect of PEG 4000 concentration on the dissolution rate of rofecoxib from its solid dispersions was investigated. The dissolution rate of rofecoxib from its solid dispersions increased with an increasing amount of PEG 4000. The extent of dissolution rate enhancement was estimated by calculating the mean dissolution time (MDT) values. The MDT of rofecoxib decreased significantly after preparing its solid dispersions with PEG 4000. The FTIR spectroscopic studies showed the stability of rofecoxib and absence of well-defined rofecoxib-PEG 4000 interaction. The DSC and XRD studies indicated the amorphous state of rofecoxib in solid dispersions of rofecoxib with PEG 4000. SEM pictures showed the formation of effective solid dispersions of rofecoxib with PEG 4000 since well-defined change in the surface nature of rofecoxib and solid dispersions were observed. Solid dispersions formulation with highest drug dissolution rate (rofecoxib: PEG 4000 1:10 ratio) was used for the preparation of solid dispersion–based rofecoxib tablets by the direct compression method. Solid dispersion–based rofecoxib tablets obtained by direct compression, with a hardness of 8.1 Kp exhibited rapid drug dissolution and produced quick anti-inflammatory activity when compared to conventional tablets containing pure rofecoxib at the same drug dosage. This indicated that the improved dissolution rate and quick anti-inflammatory activity of rofecoxib can be obtained from its solid dispersion–based oral tablets.     

Crystal modifications and dissolution rate of piroxicam

Piroxicam is a nonsteroidal anti-inflammatory drug with low aqueous solubility which exhibits polymorphism. The present study was carried out to develop polymorphs of piroxicam with enhanced solubility and dissolution rate by the crystal modification technique using different solvent mixtures prepared with PEG 4000 and PVP K30. Physicochemical characteristics of the modified crystal forms of piroxicam were investigated by X-ray powder diffractometry, FT-IR spectrophotometry and differential scanning calorimetry. Dissolution and solubility profiles of each modified crystal form were studied and compared with pure piroxicam. Solvent evaporation method (method I) produced both needle and cubic shaped crystals. Slow crystallization from ethanol with addition of PEG 4000 or PVP K30 at room temperature (method II) produced cubic crystal forms. Needle forms produced by method I improved dissolution but not solubility. Cubic crystals produced by method I had a dissolution profile similar to that of untreated piroxicam but showed better solubility than untreated piroxicam. Cubic shaped crystals produced by method II showed improved dissolution, without a significant change in solubility. Based on the XRPD results, modified piroxicam crystals obtained by method I from acetone/benzene were cube shaped, which correlates well with the FTIR spectrum; modified needle forms obtained from ethanol/methanol and ethanol/acetone showed a slight shift of FTIR peak that may be attributed to differences in the internal structure or conformation.     

替硝唑固体分散体的制备及其体外释放特性研究

目的:利用固体分散技术制备替硝唑固体分散体,增加替硝唑溶解度和溶出速度。方法:以聚乙二醇(PEG)为载体材料,采用溶剂-熔融法制成固体分散体,测定表观溶解度,进行体外溶出试验,并采用差示扫描量热(DSC)法鉴别药物在固体分散体中的存在状态。结果:替硝唑的溶出度和表观溶解度随PEG的比例不同而不同,且溶出度随载体用量增加而增加。固体分散体的DSC曲线中替硝唑药物的特征熔融峰消失。结论:所制得的固体分散体能明显提高替硝唑的溶出度和表观溶解度。     

The preparation and characteristics of febuxostat SiO2 solid dispersions

In the present research, we selected Sylysia as a porous material and febuxostat (FBT) as model drug to prepare the FBT SiO₂ solid dispersions using a solvent evaporation method. We firstly established an HPLC method for determining FBT in our prepared FBT SiO₂ solid dispersions. And then, the characteristics of FBT SiO₂ solid dispersions were investigated, including differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), scanning electron microscope (SEM), particle size and distribution. The solubility and dissolution of FBT SiO₂ solid dispersion were also evaluated. The results of DSC and PXRD showed that the FBT existed in an amorphous state in FBT SiO₂ solid dispersions. The SEM and particle size results indicated that the shape and average particle size of FBT SiO₂ solid dispersions was similar to the Sylysia. The solubility and dissolution of FBT in FBT SiO₂ solid dispersions were significantly enhanced compared with the pure FBT. In conclusion, we successfully prepared FBT SiO₂ solid dispersions to increase the solubility and dissolution rate of the poorly water-soluble FBT.     

Thermal investigation of crystallization of polyethylene glycols in solid dispersions containing oxazepam

A critical issue in the processing of solid dispersions is to elucidate the microstructure of the resulting product. Morphological features such as crystallinity degree of both carrier and drug, and particle size of the latter, have a deep effect on the properties of the drug dissolution. In the present paper, Hot Stage Microscopy (HSM) has been employed to investigate the crystallization of polyethylene glycols (PEG) of different molecular weights used in the processing of a benzodiazepine (oxazepam). The results have shown that the crystalline morphology and the radial growth rate were dependent on the polymer molecular weight, crystallization temperature, and also on the molecular state of the drug incorporated into the polymer, forming a solid dispersion and strongly influencing the drug dissolution rate.     

Mechanism of increased dissolution of diazepam and temazepam from polyethylene glycol 6000 solid dispersions

Solid dispersion literature, describing the mechanism of dissolution of drug-polyethylene glycol dispersions, still shows some gaps; (A). only few studies include experiments evaluating solid solution formation and the particle size of the drug in the dispersion particles, two factors that can have a profound effect on the dissolution. (B). Solid dispersion preparation involves a recrystallisation process (which is known to be highly sensitive to the recrystallisation conditions) of polyethylene glycol and possibly also of the drug. Therefore, it is of extreme importance that all experiments are performed on dispersion aliquots, which can be believed to be physico-chemical identical. This is not always the case. (C). Polyethylene glycol 6000 (PEG6000) crystallises forming lamellae with chains either fully extended or folded once or twice depending on the crystallisation conditions. Recently, a high resolution differential scanning calorimetry (DSC)-method, capable of evaluating qualitatively and quantitatively the polymorphic behaviour of PEG6000, has been reported. Unraveling the relationship between the polymorphic behavior of PEG6000 in a solid dispersion and the dissolution characteristics of that dispersion, is a real gain to our knowledge of solid dispersions, since this has never been thoroughly investigated. The aim of the present study was to fill up the three above mentioned gaps in solid dispersion literature. Therefore, physical mixtures and solid dispersions were prepared and in order to unravel the relationship between their physico-chemical properties and dissolution characteristics, pure drugs (diazepam, temazepam), polymer (PEG6000), solid dispersions and physical mixtures were characterised by DSC, X-ray powder diffraction (Guinier and Bragg-Brentano method), FT-IR spectroscopy, dissolution and solubility experiments and the particle size of the drug in the dispersion particles was estimated using a newly developed method. Addition of PEG6000 improves the dissolution rate of both drugs. Mechanisms involved are solubilisation and improved wetting of the drug in the polyethylene glycol rich micro-environment formed at the surface of drug crystals after dissolution of the polymer. Formulation of solid dispersions did not further improve the dissolution rate compared with physical mixtures. X-ray spectra show that both drugs are in a highly crystalline state in the solid dispersions, while no significant changes in the lattice spacings of PEG6000 indicate the absence of solid solution formation. IR spectra show the absence of a hydrogen bonding interaction between the benzodiazepines and PEG6000. Furthermore, it was concluded that the reduction of the mean drug particle size by preparing solid dispersions with PEG6000 is limited and that the influence of the polymorphic behavior of PEG6000 (as observed by DSC) on the dissolution was negligible.     

三维有序大孔壳聚糖/尼莫地平固体分散体的研究

目的制备孔径为470nm的三雏有序大孔壳聚糖／尼莫地平的固体分散体,研究其释药特点、稳定性和药动学。方法利用溶剂蒸发法制备固体分散体,通过药物释放试验考察固体分散体在模拟胃肠液介质中的释放行为;通过含量测定、X-射线衍射和溶出试验检查固体分散体的稳定性;大鼠分别给予自制固体分散体和市售片粉末,测定血药浓度。结果固体分散体在pH6.8的介质中的溶出度明显比pH1.2和pH4.5介质中高,在梯度pH介质中的释药曲线类似阶梯型;结晶度和溶出度在考察时间内基本无变化;自制固体分散体的AUC0.12h是市售制剂的1.91倍,具有长效作用。结论自制固体分散体稳定性良好,能够提高尼莫地平的大鼠口服生物利用度。     

Characterization of the distribution, polymorphism, and stability of nimodipine in its solid dispersions in polyethylene glycol by micro-Raman spectroscopy and powder x-ray diffraction

In the present study, a series of solid dispersions of the drug nimodipine using polyethylene glycol as carrier were prepared following the hot-melt method. Micro-Raman spectroscopy in conjunction with X-ray powder diffractometry was used for the characterization of the solid structure, including spatial distribution, physical state, and presence of polymorphs, as well as storage stability of nimodipine in its solid formulations. The effect of storage time on drug stability was investigated by examination of the samples 6 months and 18 months after preparation. Confocal micro-Raman mapping performed on the samples showed that the drug was not uniformly distributed on a microscopic level. The presence of crystals of nimodipine with sizes varying between one and several micrometers was detected, and the crystal size seemed to increase with overall drug content. In samples examined 6 months after preparation it was found that the crystals existed mainly as the racemic compound, whereas after 18 months of storage mainly crystal conglomerates were observed.     

Preparation and characterization of solid dispersions of Quercetin with PEG4000

Objective To enhance the solubility,quicken the speed of digesting and absorption,and increase the bioavailability of quercetin(3,3',4',5,7-pentahydroxyflavone).Methods A series of Quercetin-PEG4000 solid dispersions were prepared by fusion method.The configuration and property of solid dispersion were characterized by solubility tests,dissolution tests,FTIR spectra,differential scanning calorimetry(DSC)and microphotograph.Results 1.According to solubility tests the the mass ratio of quercetin to PEG4000 affected strongly on the solubility of solid dispersions,on the whole,the relation of the solubility of solid dispersions to the mass ratio presented linear relationship.The preparation temperature had little effect on the solubility of solid dispersions.The surface-active agent,polysorbate80 increased strongly the solubility of solid dispersions.2.According to the dissolution tests,the mass ratio of quercetin to PEG4000 affected strongly on the dissolution of solid dispersions,the preparation temperature had little effect on the dissolution of solid dispersions.The surface-active agent,polysorbate80 increased strongly the dissolution of solid dispersions,and after addition polysorbate80,the dissolution of solid dispersions was two times of the dissolution of solid dispersions without polysorbate80.3.According to the DSC results,except that a little of quercetin molecular existed as crystalline state in the solid dispersion with the mass ratio was qu:PEG=1:2,quercetin existed as amorphous phase in other mass ratio solid dispersion.4.According to the FTIR spectra and microphotograph results,the relation of quercetin and PEG4000 was mainly physical mixing in quercetin-PEG4000 solid dispersion.Quercetin was just like solute in solution,and PEG4000 was just like solvent in solution.The force between quercetin and PEG4000 was mainly hydrogen bonding,so the biological activity of quercetin would not be influenced greatly after the formation solid dispersion.Conclusions These results suggest that quercetin existed mainly as amorphous phase in solid dispersion;the solubility and the dissolution in water were increased obviously after formation the solid dispersion.     

Improvement of solubility and dissolution rate of indomethacin by solid dispersions in Gelucire 50/13 and PEG4000

The aim of this study was to prepare and characterize solid dispersions of water insoluble non-steroidal anti-inflammatory drug, indomethacin (IND), with polyethylene glycol 4000 (PEG4000) and Gelucire 50/13 (Gelu.) for enhancing the dissolution rate of the drug. The solid dispersions (SDs) were prepared by hot melting method at 1:1, 1:2 and 1:4 drug to polymer ratios. Scanning electron microscopy (SEM), X-ray powder diffractometry (XRD) and differential scanning calorimetry (DSC) were used to examine the physical state of the drug. Furthermore, the solubility and the dissolution rate of the drug in its different systems were explored. The data from the XRD showed that the drug was still detectable in its solid state in all SDs of IND–Gelu. and disappeared in case of higher ratio of IND–PEG4000. DSC thermograms showed the significant change in melting peak of the IND when prepared as SDs suggesting the change in crystallinity of IND. The highest ratio of the polymer (1:4) enhanced the drug solubility about 4-folds or 3.5-folds in case of SDs of IND–PEG or IND–Gelu., respectively. An increased dissolution rate of IND at pH 1.2 and 7.4 was observed when the drug was dispersed in these carriers in form of physical mixtures (PMs) or SDs. IND released faster from the SDs than from the pure crystalline drug or the PMs. The dissolution rate of IND from its PMs or SDs increased with an increasing amount of polymer.     

杨梅素固体分散体的制备以及体外溶出试验

目的运用固体分散技术制备杨梅素固体分散体并提高其体外溶出速率。方法选用PEG6000和PVPK30为载体,采用溶剂法和溶剂-熔融法制备杨梅素固体分散体,采用紫外分光光度法进行含量测定,并进行溶解度、体外溶出试验。结果两种载体的固体分散体均能增加药物的溶解度和溶出速率,杨梅素在载体中以高度分散状态存在。结论以PVPK30为载体的杨梅素固体分散体体外溶解度和溶出速率明显提高。杨梅素固体分散体能显著提高杨梅素的溶出速率。     

The properties of solid dispersions of indomethacin or phenylbutazone in polyethylene glycol

The effects of molecular weight of polyethylene glyeols (PEGs) on the dissolution rates and crystallinity of its solid dispersions with indoniethacin and phenylbutazone have been examined. The dissolution rates of both solid-dispersed drugs decreased as the molecular weight of PEG increased. The indoniethacin dissolution profiles were essentially linear using constant surface area disc methodology and a limiting dissolution rate of about 10.6 mg · min⁻¹ was observed. The phenylbutazone dissolution profiles were. however, generally linear-curvic usually giving lower release rates than the comparative indomethacin weight fractions. A limiting dissolution rate for the linear portions of the profiles was about 1.8 mg · min⁻¹. Infra-red spectra indicated that the differences between the two drugs could partly be explained on the basis of PEG crystallinity. Generally bands in the ranges 1100–1130 and 1200–1400 cm⁻¹ were poorly differentiated in indomethacin dispersions (PEG 1500, PEG 4000 and PEG 6000) but were better differentiated in phenylbutazone dispersions (PEG 4000, PEG 6000 and PEG 20,000). A greater proportion of amorphousness within the PEG moiety was predicted in indomethacin dispersions by the appearance of a new weak band at 1326 cm⁻¹ and by a decrease in intensity of the band at 845 cm⁻¹ at the expense of the peak at 960 cm⁻¹. The evidence was supported by differential scanning calorimetry. The heats of fusion were 44.7, 46.4, 47.2 and 39.5 cal · g⁻¹ for PEG 1500, PEG 4000, PEG 6000 and PEG 20.000 respectively. Heats of fusion for indomethacin dispersions (2, 5 and 10% drug) were generally lower than for the corresponding values for phenylbutazone dispersions-with the exception of PEG 20,000 dispersions. For example, values were obtained of 30.6 and 37.9 cal · g⁻¹ for PEG 1500 dispersions containing 10% indomethacin and phenylbutazone, respectively.     

Physicochemical characterization and in vitro dissolution studies of solid dispersions of ketoprofen with PVP K30 and d-mannitol

Aim of the present study was to improve the solubility and dissolution rate of poorly water soluble, BCS class-II drug Ketoprofen (KETO) by solid-dispersion approach. Solid dispersions were prepared by using polyvinylpyrrolidone K30 (PVP K30) and d-mannitol in different drugs to carrier ratios. Dispersions with PVP K30 were prepared by kneading and solvent evaporation techniques, whereas solid dispersions containing d-mannitol were prepared by kneading and melting techniques. These formulations were characterized in the liquid state by phase-solubility studies and in the solid state by Differential Scanning Calorimetry (DSC), Fourier Transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). The aqueous solubility of KETO was favored by the presence of both carriers. The negative values of Gibbs free energy illustrate the spontaneous transfer from pure water to the aqueous polymer environment. Solid state characterization indicated KETO was present as fine particles in d-mannitol solid dispersions and entrapped in carrier matrix of PVP K30 solid dispersions. In contrast to the very slow dissolution rate of pure KETO, dispersions of drug in carriers considerably improved the dissolution rate. This can be attributed to increased wettability and dispersibility, as well as decreased crystallinity and increase in amorphous fraction of drug. Solid dispersions prepared with PVP K30 showed the highest improvement in dissolution rate of KETO. Even physical mixtures of KETO prepared with both carriers also showed better dissolution profiles than those of pure KETO.     

A calorimetric investigation into the interaction between paracetamol and polyethlene glycol 4000 in physical mixes and solid dispersions.

The solubility, heat of solution and dissolution rate of paracetamol and polyethyelene glycol 4000 (PEG 4000) systems have been studied in order to clarify the nature of the interaction between the two components during dissolution of solid dispersions. The logarithmic solubility of paracetamol demonstrated a non-linear increase with concentration of PEG 4000, while linear relationships between heat of solution in water and concentration were seen for both individual components. However, the heat of solution of paracetamol was found to decrease with increasing concentrations of PEG 4000. Similarly, the heats of solution in water of physical mixes and solid dispersions prepared using two manufacturing protocols were found to be lower than the theoretical values calculated from those corresponding to the individual components. Drug release studies showed a marked increase in paracetamol dissolution rate when prepared as a solid dispersion, with behaviour consistent with carrier controlled dissolution observed at low drug contents which was ascribed to enhanced dissolution of the drug into the diffusion layer of the PEG 4000. The implications of the understanding of this mechanism for the choice of carrier and manufacturing protocol for solid dispersion products is discussed.     

难溶性药物水飞蓟宾固体分散体的制备及评价(英文)

采用溶剂法制备水飞蓟宾的PVP K30固体分散体以提高其溶解度和溶出速率;通过平衡溶解度、溶出速率、DSC和FTIR等方法验证和定性分析制备的固体分散体。水飞蓟宾的固体分散体与原料药及物理混合物相比,改善了药物的溶解度和溶出速率。DSC曲线显示水飞蓟宾的吸热峰消失,表明水飞蓟宾以无定形物分散于载体材料中;FTIR的研究结果表明水飞蓟宾的羟基和PVP K30的羰基发生了反应。固体分散技术可应用于难溶性药物以改善其体外溶出及进一步的体内吸收。     

Development,characterization and solubility enhancement of comparative dissolution study of second generation of solid dispersions and microspheres for poorly water soluble drug

The poor dissolution characteristics of water-insoluble drugs are a major challenge for pharmaceutical scientists. Reduction of the particle size/increase in the surface area of the drug is a widely used and relatively simple method for increasing dissolution rates. The objective of this study was to improve solubility, release and comparability of dissolution of a poorly soluble drug using two different types of formulations (solid dispersions and microspheres). Hydrochlorothiazide was used as a model drug. The solid dispersions and microspheres were prepared by solvent evaporation method using ethyl cellulose, hydroxypropyl methylcellulose in different drug-to-carrier ratios (1:1, 1:2 w:w). The prepared formulations were evaluated for interaction study by Fourier transform infrared spectroscopy, differential scanning calorimetry, percentage of practical yield, drug loading, surface morphology by scanning electron microscopy, optical microscopy and in-vitro release studies. The results showed no interaction between the drug and polymer, amorphous state of solid dispersions and microspheres, percentage yield of 42.53% to 78.10%, drug content of 99.60 % to 99.64%, good spherical appearance in formulation VI and significant increase in the dissolution rate.