Development of a three-dimensional unit cell to model the micromechanical response of a collagen-based extracellular matrix

The three-dimensional microstructure and mechanical properties of the collagen fibrils within the extracellular matrix (ECM) is now being recognized as a primary factor in regulating cell proliferation and differentiation. Therefore, an appreciation of the mechanical aspects by which a cell interacts with its ECM is required for the development of engineered tissues. Ultimately, using these interactions to design tissue equivalents requires mathematical models with three-dimensional architecture. In this study, a three-dimensional model of a collagen fibril matrix undergoing uniaxial tensile stress was developed by making use of cellular solids. A structure consisting of thin struts was chosen to represent the arrangement of collagen fibrils within an engineered ECM. To account for the large deformation of tissues, the collagen fibrils were modeled as hyperelastic neo-Hookean or Mooney–Rivlin materials. The use of cellular solids allowed the fibril properties to be related to the ECM properties in closed form, which, in turn, allowed the estimation of fibril properties using ECM experimental data. A set of previously obtained experimental data consisting of simultaneous measures of the fibril microstructure and mechanical tests was used to evaluate the model’s capability to estimate collagen fibril mechanical property when given tissue-scale data and to predict the tissue-scale mechanical properties when given estimated fibril stiffness. The fibril tangent modulus was found to be 1.26 ± 0.70 and 1.62 ± 0.88 MPa when the fibril was modeled as neo-Hookean and Mooney–Rivlin material, respectively. There was no statistical significance of the estimated fibril tangent modulus among the different groups. Sensitivity analysis showed that the fibril mechanical properties and volume fraction were the two input parameters which required accurate values. While the volume fraction was easily obtained from the initial image of the gel, the fibril mechanical properties were not readily available. Therefore the fibril mechanical properties were estimated in the leave-one-out cross-validation (LOOCV) analysis. The LOOCV analysis showed that the model was able to predict the ECM stress–stretch curve with an average mean squared error of 9.71 kPa². The three-dimensional architecture expands on previous continuum models and two-dimensional representations to provide a useful model for studying the hierarchical effects of ECM microstructure on cell function. This model can be used as a design tool to engineer the optimum microstructure for cells to function.     

Beneficial effects of freezing rate determined by indirect thermophysical calculation on cell viability in cryopreserved tissues

Many types of mammalian cells, such as sperm, blood, embryos, etc., have been successfully cryopreserved for the last few decades, while no optimal method for the cryopreservation of mammalian tissues or organs has been established, showing a poor survival after thawing with a low recovery of function. In this study, the freezing rate was determined by indirect thermodynamic calculation, and its potential effect on the cryoprotection of human saphenous veins and tissue-engineered bones was investigated. The vein segments were frozen according to the calculated freezing rate, using rate-controlled freezing devices, with a freezing solution composed of 10% dimethylsulphoxide and 20% fetal bovine serum in RPMI 1640 media. The efficacy of indirect calculation was assessed by the cell viability measured using fluorescence double-staining methods. The results indicated that the freezing rate determined by indirect calculation significantly (P < 0.05) maintained the post-thaw cellular viability of the blood vessel, particularly in terms of the endothelial cells. However, it exerted relatively less protective effect on the osteoblastic cell-cultured scaffolds. These results suggest that freezing-induced injuries may occur in tissues, and the freezing rate determined by indirect thermophysical calculation can be used for the optimization of tissue cryopreservation by minimizing the injuries.     

Optimization and characterization of an engineered human skin equivalent

Skin equivalents (SEs) have been designed to meet both basic and applied research needs. The successful application of tissue-engineered SEs requires that the reconstituted tissues be endowed with the correct organization and function. A large body of experimental evidence now supports the notion that the inducing effects of mesenchymal tissue on epithelial cell morphogenesis are mediated, at least in part, by extracellular matrix components in addition to cell-cell interactions. A coculture model including both fibroblasts and keratinocytes was used to study the effects of progressive serum reduction on epidermal differentiation, quality of dermal and dermal-epidermal junctions, and expression of extracellular matrix proteins. The cells were successively added to a dermal substrate composed of collagen, glycosaminoglycans, and chitosan. The main aim of this study was to optimize this model for pharmacotoxicological trials. Control skin equivalents were cultured with medium containing 10% serum throughout the production process. Serum content was reduced to 1 and 0% at the air-liquid interface and compared with control skin equivalents. First, we demonstrated that serum deprivation at the air-liquid interface improves keratinocyte terminal differentiation. Second, we showed that, in the absence of serum, the specific characteristics of the SE are maintained, including epidermal and dermal ultrastructure, the expression of major dermal extracellular matrix components (human collagen types I, III, and V, fibronectin, elastin, and fibrillin 1), and the dermal-epidermal junction (laminin, human type IV collagen, alpha6 integrin). Furthermore, our results indicate that coculture models using keratinocytes and fibroblasts have both morphological and functional properties required for biologically useful tissues.     

组织工程化肌腱种子细胞深低温保存的实验研究

对肌腱种子细胞进行深低温保存，研究保存过程中多个环节的影响因索对细胞存活率的影响及深低温保存对种子细胞生物学特性、胶原分泌功能的影响。实验结果表明二甲基亚砜是肌腱种子细胞深低温保存中比较好的抗冻保护剂；冻存后使用与培养时不同的营养血清处理对细胞有损害，可降低细胞存活率；在冷冻保存过程中，细胞存活率与细胞浓度有一定关系，浓度太低可能降低细胞存活率；细胞在冷冻保存时，降温速度对细胞存活率有影响，慢速的分步降温组细胞存活率明显高于直接人液氮的快速降温组；采用10％二甲基亚砜加15%小牛血清加75% DMEM配方保存肌腱种子细胞，对其分泌胶原功能无明显影响，对其生长曲线、细胞周期及染色体众数无明显改变，适于肌腱种子细胞的保存。     

In vitro characterization of an artificial dermal scaffold

The treatment of extensive burn injuries has been enhanced by the development of artificial skin substitutes. Integra Artificial Skin, an acellular collagen-glycosaminoglycan (C-GAG) dermal equivalent requires a two-stage grafting procedure. However, preseeding the C-GAG dermal equivalent with cultured fibroblasts and keratinocytes, with the aim of performing a single-stage grafting procedure, may be beneficial in terms of replacing the requirement for traditional split-skin grafts. In this comparative in vitro study, the interactions of cultured human dermal fibroblasts and epidermal keratinocytes in Integra Artificial Skin in comparison to cadaver deepidermalized dermis (DED) was investigated. An increase in cell proliferation and migration in the C-GAG dermal equivalent was observed over time. Cocultures of fibroblasts and keratinocytes on both dermal equivalents showed positive expression of proliferation, differentiation, and extracellular matrix (ECM) protein markers. Organization of keratinocytes in the epidermal layers of DED composites were better compared to the C-GAG composites. Deposition of ECM proteins was enhanced in the presence of keratinocytes in both dermal equivalents. Results demonstrate that in vitro the C-GAG dermal equivalent is biocompatible for cell attachment, migration, proliferation, and differentiation. Preseeding Integra Artificial Skin with cultured autologous fibroblasts and keratinocytes for in vivo application, as a single-stage grafting procedure, warrants testing. A better clinical outcome may be achieved as shown by our in vitro results of the coculture composites.     

Engineered dermal equivalent tissue in vitro by assembly of microtissue precursors

Tissue-engineered constructs can be fabricated by the assembly of smaller building blocks in order to mimic much of the native biology that is often made from repeating functional units. Our aim was to realize a three-dimensional (3-D) tissue-like construct in vitro by inducing the assembly of functional micrometric tissue precursors (μTPs). μTPs were obtained by dynamic cell seeding of bovine fibroblasts on porous gelatine microcarriers using a spinner flask bioreactor. During the dynamic seeding, cells adhered, proliferated and synthesized a thin layer of extracellular matrix (ECM) in and around the macroporous beads, generating the μTPs. The analysis showed that the ECM produced was rich in type I collagen. The cells and ECM layer around the μTPs allowed their biological sintering via cell–cell and cell–matrix interaction after only a few days of dynamic seeding. The assembling ability of μTPs was exploited by placing them in a maturation chamber. After 1 week of culture disc-shaped constructs (1 cm in diameter, 1 mm in thickness) of completely assembled μTPs were collected. The biohybrid obtained presented both a homogeneous and compact aspect. Moreover, histological and immunohistochemical analyses revealed an abundant ECM, rich in type I collagen, interconnecting the μTPs. The results obtained in this survey pave the way to realizing a 3-D dermal tissue equivalent by means of a bottom-up tissue engineering approach.     

Prediction of equibiaxial loading stress in collagen-based extracellular matrix using a three-dimensional unit cell model

Mechanical signals are important factors in determining cell fate. Therefore, insights as to how mechanical signals are transferred between the cell and its surrounding three-dimensional collagen fibril network will provide a basis for designing the optimum extracellular matrix (ECM) microenvironment for tissue regeneration. Previously we described a cellular solid model to predict fibril microstructure–mechanical relationships of reconstituted collagen matrices due to unidirectional loads (Acta Biomater 2010;6:1471–86). The model consisted of representative volume elements made up of an interconnected network of flexible struts. The present study extends this work by adapting the model to account for microstructural anisotropy of the collagen fibrils and a biaxial loading environment. The model was calibrated based on uniaxial tensile data and used to predict the equibiaxial tensile stress–stretch relationship. Modifications to the model significantly improved its predictive capacity for equibiaxial loading data. With a comparable fibril length (model 5.9–8 μm, measured 7.5 μm) and appropriate fibril anisotropy the anisotropic model provides a better representation of the collagen fibril microstructure. Such models are important tools for tissue engineering because they facilitate prediction of microstructure–mechanical relationships for collagen matrices over a wide range of microstructures and provide a framework for predicting cell–ECM interactions.     

Molecular and structural mapping of collagen fibril interactions

The fibrous collagens form the structural basis of all mammalian connective tissues, including the vasculature, dermis, bones, tendons, cartilage, and those tissues that support organs such as the heart, kidneys, liver, and lungs. The helical structure of collagen has been extensively studied but in addition to its helical character, its molecular packing arrangement (in its aggregated or fibrillar form) and the presence of specific amino acid sequences govern collagen's in vivo functions. Collagen's molecular packing arrangement helps control cellular communication, attachment and movement, and conveys its tissue-specific biomechanical properties. Recent progress in understanding collagen's molecular packing, fibrillar structure, domain organization, and extracellular matrix (ECM) interactions in light of X-ray fiber diffraction data provides significant new insights into how the ECM is organized and functions. In this review, the hierarchy of fibrillar collagen structure is discussed in the context of how this organization affects ECM-"ligand" interactions, with specific attention to collagenolysis, integrins, fibronection, glycoprotein VI receptor (GPVI), and proteoglycans (PG). Understanding the complex structure of collagen and its attached ligands should provide new insights into tissue growth, development, regeneration, and disease.     

Mechanisms of 3-D migration and matrix remodeling of fibroblasts within artificial ECMs

The elucidation of molecular cell-extracellular matrix (ECM) interactions regulating tissue dynamics necessitates straightforward model systems that can dissect the associated physiological complexity into a smaller number of distinct interactions. Here we employ a previously developed artificial ECM model system to study dynamic cell-matrix interactions involved in proteolytic three-dimensional (3-D) migration and matrix remodeling at the level of single cells. Quantitative time-lapse microscopy of primary human fibroblasts exposed to exogenous physiological matrix metalloproteinase (MMP) inhibitors revealed that 3-D migration is dependent on cell seeding density and occurred via highly localized MMP- and tissue inhibitor of metalloproteinases-2-dependent processes. Stimulation of cells by tumor necrosis factor alpha led to a striking augmentation in fibroblast migration that was accompanied by induction of alphaVbeta3 integrin expression. In long-term cultures, extensive localized cellular matrix remodeling resulted in the morphogenesis of single cells into interconnected multicellular networks. Therefore, these tailor-made artificial ECMs can replicate complex 3-D cell-matrix interactions involved in tissue development and regeneration, an important step in the design of next-generation synthetic biomaterials for tissue engineering.     

Complex dependence of substrate stiffness and serum concentration on cell-force generation

Collagen is a widely used biomaterial in tissue engineering. Mechanical stimulation of cell-seeded collagen constructs and its effects on cell orientation, intracellular signaling, and molecular responses have been reported. Our aim was to study the transfer of applied mechanical load to resident cells in 3D collagen constructs. Stainless steel markers were embedded in constructs as reporters of micromovement and uniaxial (0-15%) strain was applied. Cell-seeded collagen constructs were also subjected to (0-15%) uniaxial strain and material responses recorded. The viscoelastic properties of collagen resulted in comparatively small movement of the marker bars relative to gel deformation. Cell seeding density of 1 million/mL had no significant effect on the viscoelastic properties of collagen for the range of strain tested. Our findings indicate that viscoelastic properties of collagen result in minimal force transfer of applied loads as recorded by movement of stainless steel markers. At higher strain rates as collagen got stiffer the movement decreased. These findings indicate that as cell-seeded collagen constructs mature in a bioreactor and become stiffer due to ECM production/deposition, mechanical stimulation will have to be tailored over time to account for increased stiffness of constructs in vitro to elicit predictable and consistent cellular responses.     

Engineering extracellular matrix structure in 3D multiphase tissues

In native tissues, microscale variations in the extracellular matrix (ECM) structure can drive different cellular behaviors. Although control over ECM structure could prove useful in tissue engineering and in studies of cellular behavior, isotropic 3D matrices poorly replicate variations in local microenvironments. In this paper, we demonstrate a method to engineer local variations in the density and size of collagen fibers throughout 3D tissues. The results showed that, in engineered multiphase tissues, the structures of collagen fibers in both the bulk ECM phases (as measured by mesh size and width of fibers) as well as at tissue interfaces (as measured by density of fibers and thickness of tissue interfaces) could be modulated by varying the collagen concentrations and gelling temperatures. As the method makes use of a previously published technique for tissue bonding, we also confirmed that significant adhesion strength at tissue interfaces was achieved under all conditions tested. Hence, this study demonstrates how collagen fiber structures can be engineered within all regions of a multiphase tissue scaffold by exploiting knowledge of collagen assembly, and presents an approach to engineer local collagen structure that complements methods such as flow alignment and electrospinning.     

Collagen stiffness regulates cellular contraction and matrix remodeling gene expression

Cell-level mechanical and 3D spatial cues are essential to the organization and architecture of new tissues that form during growth, repair or in bioreactors. Fibroblast-seeded 3D collagen constructs have been used as bioartifical extracellular matrix (ECM) providing a 3D environment to embedded resident cells. As cells attach to scaffold fibrils, they generate quantifiable contractile forces which depend on cell type, cell attachment, cell density, growth factors, and matrix stiffness. The aim of this study was to quantify the cytomechanical and molecular responses of human dermal (HDF) and neonatal foreskin fibroblasts (HNFF) seeded in constructs of increased stiffness. We also tested the effect of blocking early attachment using serum starvation on these outputs. Constructs were placed under uniaxial strains of 0-10% to increase scaffold stiffness, prior to gel contraction, and force generation was monitored using a tensional culture force monitor (t-CFM). Increased matrix stiffness reduced generation of quantifiable cellular force (up to 70%) over 24 h in both cell types and delayed the onset of measurable contraction (upto sevenfold). The delay of measurable force generation was cell lineage dependent but not FCS dependent. Gene expression of MMP-2, TIMP-2, and collagen type III expression in HDFs were significantly upregulated in constructs of increased stiffness. HNFFs did not show any significant changes in these gene expressions indicating a lineage specific response.     

A Cryoinjury Model Using Engineered Tissue Equivalents for Cryosurgical Applications

Cryosurgery is emerging as a promising treatment modality for various cancers, but there are still challenges to be addressed to improve its efficacy. Two primary challenges are determining thermal injury thresholds for various types of cell/tissue, and understanding of the mechanisms of freezing induced cell/tissue injury within a cryolesion. To address these challenges, various model systems ranging from cell suspensions to three-dimensional in vivo tissues have been developed and used. However, these models are either oversimplifications of in vivo tissues or difficult to control and extract precise experimental conditions from. Therefore, a more readily controllable model system with tissue-like characteristics is needed. In this study, a cryoinjury model was developed using tissue engineering technology, and the capabilities of the model were demonstrated. Engineered tissue equivalents (TEs) were constructed by seeding and culturing cells in a type I collagen matrix. Two different cell lines were used in this study, AT-1 rat prostate tumor cells and LNCaP human prostate cancer cells. The constructed TEs underwent a freeze/thaw cycle imitating in vivo cryosurgery. Thermal conditions within TEs during freeze/thaw cycles were characterized, and the responses of TEs to these thermal conditions including freezing induced cellular injury and extracellular matrix damage were investigated at three different time points. The results illustrate the feasibility to establish thermal thresholds of cryoinjury for different cell/tissue types using the presently developed model, and its potential capabilities to study cell death mechanisms, cell proliferation or migration, and extracellular matrix structural damage after a freeze/thaw cycle.     

Type IV Collagen and Laminin Regulate Glomerular Mesangial Cell Susceptibility to Apoptosis Via β1 Integrin-Mediated Survival Signals

Postinflammatory scarring is characterized by changes in extracellular matrix (ECM) composition and progressive loss of normal resident cells. In glomerular inflammation there is now evidence that unscheduled apoptosis (programmed cell death) of mesangial and other resident cells may mediate progression to irreversible glomerulosclerosis. In the current study we examined the hypothesis that ECM components may differ in their capacity to support mesangial cell survival by suppression of apoptosis. Using a well-established in vitro model of mesangial cell apoptosis, we found that collagen IV and laminin, components of normal mesangial ECM, protected rat mesangial cells from apoptosis induced by serum starvation and DNA damage, by a beta(1) integrin-mediated, but arg-gly-asp (RGD)-independent mechanism. In contrast, collagen I, fibronectin, and osteonectin/SPARC, which are overexpressed in diseased glomeruli, failed to promote rat mesangial cell survival. However, the survival-promoting effect of collagen IV and laminin was not associated with changes in cellular levels of apoptosis regulatory proteins of the Bcl-2 family. These experiments demonstrate that glomerular mesangial cell survival is dependent on interactions with ECM and provide insights into potential mechanisms by which resident cell loss may occur during acute inflammation and postinflammatory scarring of the kidney and other organs.     

A hydrogel derived from decellularized dermal extracellular matrix

The ECM of mammalian tissues has been used as a scaffold to facilitate the repair and reconstruction of numerous tissues. Such scaffolds are prepared in many forms including sheets, powders, and hydrogels. ECM hydrogels provide advantages such as injectability, the ability to fill an irregularly shaped space, and the inherent bioactivity of native matrix. However, material properties of ECM hydrogels and the effect of these properties upon cell behavior are neither well understood nor controlled. The objective of this study was to prepare and determine the structure, mechanics, and the cell response in?vitro and in?vivo of ECM hydrogels prepared from decellularized porcine dermis and urinary bladder tissues. Dermal ECM hydrogels were characterized by a more dense fiber architecture and greater mechanical integrity than urinary bladder ECM hydrogels, and showed a dose dependent increase in mechanical properties with ECM concentration. In?vitro, dermal ECM hydrogels supported greater C2C12 myoblast fusion, and less fibroblast infiltration and less fibroblast mediated hydrogel contraction than urinary bladder ECM hydrogels. Both hydrogels were rapidly infiltrated by host cells, primarily macrophages, when implanted in a rat abdominal wall defect. Both ECM hydrogels degraded by 35 days in?vivo, but UBM hydrogels degraded more quickly, and with greater amounts of myogenesis than dermal ECM. These results show that ECM hydrogel properties can be varied and partially controlled by the scaffold tissue source, and that these properties can markedly affect cell behavior.     

Cells and tissue interactions with glycated collagen and their relevance to delayed diabetic wound healing

Dermal accumulation of advanced glycation end products (AGEs) has increasingly been implicated as the underlying cause of delayed diabetic wound healing. Devising an in vitro model to adequately mimic glycated tissues will facilitate investigation into the mechanism of glycation in conjunction with exploration of new approaches or improvement of current therapies for treating diabetic chronic wounds. Collagen matrices were artificially glycated and the presence of AGEs was demonstrated by immunostaining. Both the mechanical properties of the collagen matrices and their interactions with fibroblasts (morphology, attachment, proliferation, and migration) were altered after glycation, moreover, there was evidence of impairment on extracellular matrix (ECM) remodeling as well as inhibition of cell-induced material contraction. The actin cytoskeletons of the fibroblasts residing in the glycated collagen matrices were reorganized. In vivo mice full-thickness dermal wound models implanted with glycated collagen matrices showed delayed wound healing response. Thus, the glycated collagen matrix is an adequate in vitro model to mimic glycated tissues and could serve as a facile experimental tool to investigate the mechanism of glycation in conjunction with exploration of new approaches or improvement of current therapies for treating diabetic wounds.     

Human oocyte cryopreservation as an adjunct to IVF-embryo transfer cycles

BACKGROUND: The purpose of this work was to develop methods for successful cryopreservation of human oocytes. METHODS: Two cryopreservation procedures were used. Method 1 involved use of 1.5 mol/l propanediol (PrOH)-0.1 mol/l sucrose with medium containing sodium (Na) as cryoprotectant medium, seeding at -7 degrees C, and stepwise dilution of cryoprotectant post-thaw. Method 2 used Na-depleted media with 1.5 mol/l PrOH-0.2 mol/l sucrose for freezing, seeding at -6 degrees C, and use of high sucrose (0.5 and 0.2 mol/l) for cryoprotectant removal. RESULTS: The first method was used in seven patients, and gave poor (12.3%) survival results and no pregnancies. The second method was used in 15 patients (16 cycles), and yielded good survival and fertilization rates (74.4 and 59% respectively), with four pregnancies and five healthy infants born to 11 women receiving an embryo transfer. CONCLUSIONS: Using Na-depleted media along with other alterations in freezing and thawing procedures, human oocyte cryopreservation can provide excellent survival and pregnancy rates.     

The influence of GFP-actin expression on the adhesion dynamics of HepG2 cells on a model extracellular matrix

Integrins belong to a family of important cell surface receptors which mediate the adhesion of most anchorage-dependent cells to nature extracellular matrix (ECM) and biomaterials. It is known that the binding of integrin with ECM proteins triggers mechanochemical responses of cytoskeleton. To date, the intricate interplay between integrin-ECM interaction and cytoskeleton dynamics leading to the regulation of cell morphogenesis on biomaterials remains largely unknown. In this study, green fluorescence protein (GFP)-actins were expressed in HepG2 cells for the temporal visualization of cytoskeletal structure of adherent cells on naturally derived materials. By combining confocal reflectance contrast microscopy and fluorescence microscopy, the adhesion contact dynamics, cytoskeleton remodeling and two-dimensional spreading of intact and GFP-actin expressing HepG2 cells on collagen and fibronectin-coated substrates are simultaneously probed during the initial cell seeding. First of all, our results show that the evolution of adhesion contact of HepG2 cells upon integrin-collagen or integrin-fibronectin interaction is impaired by GFP-actin expression. Also, the initial rate of cell deformation is reduced by 70% and 43% on fibronectin and collagen, respectively, upon GFP-actin expression. Interestingly, the steady-state adhesion energy of HepG2 cells remains unchanged and increases on fibronectin- and collagen-coated substrate, respectively, upon GFP-actin expression. Our highly integrated biophysical approach demonstrates that GFP-actins diffusively concentrate in the cytoplasmic cortex during initial cell seeding while adhesion contact evolves and cell spreads. Kinetics analysis on the adhesion contact formation demonstrates the intricate interplay between cytoskeleton property and ECM proteins in cell adhesion.     

Biocompatible nanofiber matrices for the engineering of a dermal substitute for skin regeneration

Natural and synthetic biodegradable nanofibers are extensively used for biomedical applications and tissue engineering. Biocompatibility and a well-established safety profile for polycaprolactone (PCL) and collagen represent a favorable matrix for preparing a dermal substitute for engineering skin. Collagen synthesized by fibroblasts is a good surface active agent and demonstrates its ability to penetrate a lipid-free interface. During granulation tissue formation, fibronectin provides a temporary substratum for migration and proliferation of cells and provides a template for collagen deposition, which increases stiffness and tensile strength of this healing tissues. The objective of this study was to fabricate nanofiber matrices from novel biodegradable PCL and collagen to mimic natural extracellular matrix (ECM) and to examine the cell behavior, cell attachment, and interaction between cells and nanofiber matrices. Collagen nanofiber matrices show a significant (p < 0.001) level of fibroblast proliferation and increase up to 54% compared with control tissue culture plate (TCP) after 72 h. The present investigation shows that PCL-coated collagen matrices are suitable for fibroblast growth, proliferation, and migration inside the matrices. This novel biodegradable PCL and collagen nanofiber matrices support the attachment and proliferation of human dermal fibroblasts and might have potential in tissue engineering as a dermal substitute for skin regeneration.     

Distinct patterns of microvascular endothelial cell morphology are determined by extracellular matrix composition.

Endothelial interactions with the extracellular matrix (ECM) play important roles in angiogenesis but whether specific ECM signals can determine specific cellular morphologies is unclear. The authors compared in vitro ECM-induced morphological responses of the phenotypically distinct human placental microvascular endothelial cells (HPMECs) with large vessel endothelial cells (HUVECs). HPMECs showed distinct patterns of reorganization in response to collagen-I or collagen-IV (monolayer disruption, sprouting, migration) and Matrigel or laminin-A (intussusception, cord formation, tubulogenesis), and an intermediate response to fibrin; whereas HUVECs responded similarly to collagen-1 and Matrigel (elongation, lattice formation, vacuolation) and showed little response to fibrin. Although the extent of collagen and Matrigel responses of HPMECs were increased by serum, acidic or basic fibroblast growth factor (aFGF, bFGF), or vascular endothelial growth factor (VEGF), and varied with matrix protein concentration, the basic patterns were matrix specific, and were independent of fibronectin. The collagen responses correlated with disruption of adherens and tight junctions and the formation of filopodial protrusions. Matrigel responses were associated with up-regulated junctional localization of VE-cadherin, and tubulogenesis developed mainly through paracellular remodeling rather than intracellular vacuolation. Overall, these findings suggest that distinct ECM interactions stimulate specific morphological responses. These signals may regulate morphological behaviour in the angiogenesis cycle, switching endothelial cells between migratory and vasculogenic phenotypes.