Digital Variance Angiography in Selective Lower Limb Interventions

PurposeTo evaluate the potential benefits of digital variance angiography (DVA) in selective lower limb angiography and to compare the performance of 2 DVA algorithms (conventional DVA1 and the recently developed DVA2) to that of digital subtraction angiography (DSA).Materials and MethodsFrom November 2019 to May 2020, 112 iodinated contrast media (ICM) and 40 carbon dioxide (CO₂) angiograms were collected from 15 and 13 peripheral artery disease patients, respectively. The DVA files were retrospectively generated from the same unsubtracted source file as DSA. The objectively calculated contrast-to-noise ratio (CNR) and the subjective visual image quality of DSA, DVA1, and DVA2 images were statistically compared using the Wilcoxon signed-rank test. The images were evaluated by 6 radiologists (R.P.T., S.V., A.M.K., S.S.A., O.E., and J.S.) from 2 centers using a 5-grade Likert scale.ResultsBoth DVA algorithms produced similar increase (at least 2-fold) in CNR values (P < .001) and significantly higher image quality scores than DSA, independent of the contrast agent used. The overall scores with ICM were 3.61 ± 0.05 for DSA, 4.30 ± 0.04 for DVA1, and 4.33 ± 0.04 for DVA2 (each P < .001 vs DSA). The scores for CO₂ were 3.10 ± 0.14 for DSA, 3.63 ± 0.13 for DVA1 (P < .001 vs DSA), and 3.38 ± 0.13 for DVA2 (P < .05 vs DSA).ConclusionsDVA provides higher CNR and significantly better image quality in selective lower limb interventions irrespective of the contrast agent used. Between DVA algorithms, DVA1 is preferred because of its identical or better image quality than DVA2. DVA can potentially help the interventional decision process and its quality reserve might allow dose management (radiation/ICM reduction) in the future.     

Custom 3-Dimensional Printed Ultrasound-Compatible Vascular Access Models: Training Medical Students for Vascular Access

PurposeTo generate 3-dimensional (3D) printed ultrasound (US)-compatible vascular models (3DPVAM) and test them for noninferiority in training medical students in femoral artery access.Materials and MethodsA 3DPVAM of normal femoral artery (FA) anatomy was developed from an anonymized computerized tomography (CT) examination. Students were randomized to a 3DPVAM or a commercial model (CM) simulation experience (SE) for US-guided FA access. Students completed a pre-SE questionnaire ranking their self-confidence in accessing the artery on a 5-point Likert scale. A standardized SE was administered by interventional radiology faculty or trainees. Students completed a post-SE questionnaire ranking comfort with FA access on a Likert scale. Student questionnaire results from the 3DPVAM group were compared with those from the CM group by using chi-square, Wilcoxon signed-rank, and noninferiority analyses.ResultsTwenty-six and twenty-three students were randomized to 3DPVAM and commercial model training, respectively. A total of 76.9% of 3DPVAM trainees and 82.6% of CM trainees did not feel confident performing FA access prior to the SE. In both groups, training increased student confidence by 2 Likert points (3DPVAM: P < 0.001; CM P < 0.001). The confidence increase in 3DPVAM trainees was noninferior to that in CM trainees (P < 0.001).ConclusionsGeneration of a custom-made 3DPVAM is feasible, producing comparable subjective training outcomes to those of CM. Custom-made 3D-printed training models, including incorporation of more complex anatomical configurations, could be used to instruct medical students in procedural skills.     

The potential of iodinated contrast reduction in dual-energy CT thoracic angiography; an evaluation of image quality

IntroductionThe purpose of this study was to compare a dual energy CT (DECT) protocol with 50% reduction of iodinated contrast to a single energy CT (SECT) protocol using standard contrast dose in imaging of the thoracic aorta.MethodsDECT with a 50% reduction in iodinated contrast was compared with SECT. For DECT, monoenergetic images at 50, 55, 60, 65, 68, 70, and 74 keV were reconstructed with adaptive statistical iterative reconstruction (ASiR-V) of 50% and 80%. Objective image quality parameters included intravascular attenuation (HU), image noise (SD), contrast-to-noise ratio (CNR), and signal-to-noise ratio (SNR). Two independent radiologists subjectively assessed the image quality for the 55 and 68 keV DECT reconstructions and SECT on a five-point Likert scale.ResultsAcross 14 patients, the intravascular attenuation at 50–55 keV was comparable to SECT (p > 0.05). The CNRs were significantly lower for DECT with ASIR-V 50% compared to SECT for all keV-values (p < 0.05 for all). For ASIR-V 80%, CNR was comparable to SECT at energies below 60 keV (p > 0.05). The subjective image quality was comparable between DECT and SECT independent of keV level.ConclusionThis study indicates that a 50% reduction in iodinated contrast may result in adequate image quality using DECT with monoenergetic reconstructions at lower energy levels for the imaging of the thoracic aorta. The best image quality was obtained for ASiR-V 80% image reconstructions at 55 keV.Implications of practiceDual energy CT with a reduction in iodinated contrast may result in adequate image quality in imaging of the thoracic aorta. However, increased radiation dose may limit the use to patients in which a reduction in fluid and iodinated contrast volume may outweigh this risk.     

Potential of employing a quantum iterative reconstruction algorithm for ultra-high-resolution photon-counting detector CT of the hip

IntroductionThis study investigated the image quality of a new quantum iterative reconstruction algorithm (QIR) for high resolution photon-counting CT of the hip.MethodsUsing a first-generation photon-counting CT scanner, five cadaveric specimens were examined with ultra-high-resolution protocols matched for radiation dose. Images were post-processed with a sharp convolution kernel and five different strength levels of iterative reconstruction (QIR 0 – QIR 4). Subjective image quality was rated independently by three radiologists on a five-point scale. Intraclass correlation coefficients (ICC) were computed for assessing interrater agreement. Objective image quality was evaluated by means of contrast-to-noise-ratios (CNR) in bone and muscle tissue.ResultsFor osseous tissue, subjective image quality was rated best for QIR 2 reformatting (median 5 [interquartile range 5–5]). Contrarily, for soft tissue, QIR 4 received the highest ratings among compared strength levels (3 [3–4]). Both ICC_bone (0.805; 95% confidence interval 0.711–0.877; p < 0.001) and ICC_muscle (0.885; 0.824–0.929; p < 0.001) suggested good interrater agreement. CNR in bone and muscle tissue increased with ascending strength levels of iterative reconstruction with the highest results recorded for QIR 4 (CNR_bone 29.43 ± 2.61; CNR_muscle 8.09 ± 0.77) and lowest results without QIR (CNR_bone 3.90 ± 0.29; CNR_muscle 1.07 ± 0.07) (all p < 0.001).ConclusionReconstructing photon-counting CT data with an intermediate QIR strength level appears optimal for assessment of osseous tissue, whereas soft tissue analysis benefitted from applying the highest strength level available.Implications for practiceQuantum iterative reconstruction technique can enhance image quality by significantly reducing noise and improving CNR in ultra-high resolution CT imaging of the hip.     

Combined Transarterial Embolization and Percutaneous Sclerotherapy as Treatment for Refractory and Nonresectable Aneurysmal Bone Cysts

PurposeTo evaluate the safety and effectiveness of combined transarterial embolization and percutaneous sclerotherapy in the treatment of refractory and nonresectable aneurysmal bone cysts (ABCs) as assessed by imaging and clinical outcomes.Materials and MethodsThis retrospective, single-center study included 16 consecutive patients (9 women and 7 men; median age, 17 years [range, 6–25 years]) who underwent combined transarterial embolization (using ethylene vinyl alcohol) and percutaneous sclerotherapy (using ethanol gel and polidocanol) for refractory and nonresectable ABCs. The median follow-up was 27.3 months (range, 6.7–47.5 months). Grade of mineralization (5-point Likert scale), grade of fluid-fluid levels (FFLs; 4-point Likert scale), and contrast-enhancing lesion volume were evaluated before and after treatment. The quality of life was determined before and after treatment using the Musculoskeletal Tumor Society (MSTS) score and the 36-Item Short Form Survey (SF-36) health questionnaire.ResultsA mean of 1.6 ± 0.7 transarterial embolizations and 3.2 ± 1.7 percutaneous sclerotherapies were performed. No adverse events were observed. All patients showed either partial or complete response; no patient showed ABC recurrence. The grade of mineralization (3.7 ± 0.7 after therapy vs 1.4 ± 0.5 at baseline; P < .0001) and grade of FFL (3.5 ± 0.8 after therapy vs 1.9 ± 0.6 at baseline; P < .0001) significantly improved after therapy compared with baseline. The mean contrast-enhancing lesion volume significantly decreased after treatment compared with baseline (45.9 mm³ ± 96.1 vs 156.0 mm³ ± 115.3, respectively; P = .0003). The MSTS scores (28.8 ± 1.8 after treatment vs 14.1 ± 8.6 at baseline; P < .0001) and SF-36 findings revealed a significant improvement in the quality of life after treatment compared with baseline, leaving most patients without relevant constraints.ConclusionsCombined transarterial embolization and percutaneous sclerotherapy is a minimally invasive, safe, and effective treatment option for refractory and nonresectable ABCs. Treatment fostered bone mineralization and significantly improved patients’ quality of life.     

Development and Preliminary Validation of the Patient-Reported Outcome Measure for Vascular Malformation Questionnaire: A Prospective Cohort Study

PurposeTo develop and validate the Patient-Reported Outcome Measure for Vascular Malformation (PROVAM) questionnaire to assess the health-related quality of life in patients with vascular malformations.Materials and MethodsWe developed and validated PROVAM using a mixed methods design during a prospective clinical trial at a vascular anomalies clinic. From July 2019 to February 2020, 108 consecutive patients completed 130 questionnaires. The 30-item instrument assessed the domains of pain, emotional/social well-being, functional impact, and treatment satisfaction. Two additional items assessed ease of understanding and relevance. The primary outcomes of instrument reliability and validity were evaluated across several indices. The secondary outcome of responsiveness evaluated total score changes for patients who completed questionnaires both before and after treatment.ResultsInstrument reliability, as measured by Cronbach alpha, was ≥0.79 for pain, emotional/social well-being, and functional impact domains. Primary domain structure was confirmed by factor analysis (P <. 001) and convergent construct validity for all but 1 Likert scale item. In the subgroup analysis of 13 participants who completed PROVAM before and after treatment, instrument responsiveness, as measured by the total score, showed a significant decrease (median, ?10 points; interquartile range [IQR], ?3 to ?16; P = .04). Participants found the questions easy to understand (median, 5 points; IQR, 4–5 on a 5-point scale) and relevant (median score, 4; IQR, 3–5).ConclusionsPreliminary data support the reliability and validity of PROVAM in measuring the health-related quality of life in patients with vascular malformations.     

Metal artefact reduction in low-dose computed tomography: Benefits of tin prefiltration versus postprocessing of dual-energy datasets over conventional CT imaging

IntroductionThe purpose of this study was to determine the potential for metal artefact reduction in low-dose multidetector CT as these pose a frequent challenge in clinical routine. Investigations focused on whether spectral shaping via tin prefiltration, virtual monoenergetic imaging or virtual blend imaging (VBI) offers superior image quality in comparison with conventional CT imaging.MethodsUsing a third-generation dual-source CT scanner, two cadaveric specimens with different metal implants (dental, cervical spine, hip, knee) were examined with acquisition protocols matched for radiation dose with regards to tube voltage and current. In order to allow for precise comparison, and due to the relatively short scan lengths, automatic tube current modulation was disabled. Specifically, the following scan protocals were examined: conventional CT protocols (100/120 kVp), tin prefiltration (Sn 100/Sn 150 kVp), VBI and virtual monoenergetic imaging (VME 100/120/150 keV). Mean attenuation and image noise were measured in hyperdense and hypodense artefacts, in artefact-impaired and artefact-free soft tissue. Subjective image quality was rated independently by three radiologists.ResultsObjectively, Sn 150 kVp allowed for the best reduction of hyperdense streak artefacts (p < 0.001), while VME 150 keV and Sn 150 kVp protocols facilitated equally good reduction of hypodense artefacts (p = 0.173). Artefact-impaired soft tissue attenuation was lowest in Sn 150 kVp protocols (p ≤ 0.011), whereas all VME showed significantly less image noise compared to conventional or tin-filtered protocols (p ≤ 0.001). Subjective assessment favoured Sn 150 kVp regarding hyperdense streak artefacts and delineation of cortical bone (p ≤ 0.005). The intraclass correlation coefficient was 0.776 (95% confidence interval: 0.712–0.831; p < 0.001) indicating good interrater reliability.ConclusionIn the presence of metal implants in our cadaveric study, tin prefiltration with 150 kVp offers superior artefact reduction for low-dose CT imaging of osseous tissue compared with virtual monoenergetic images of dual-energy datasets. The delineation of cortical boundaries seems to benefit particularly from spectral shaping.Implications for practiceLow-dose CT imaging of osseous tissue in combination with tin prefiltration allows for superior metal artefact reduction when compared to virtual monoenergetic images of dual-energy datasets. Employing this technique ought to be considered in daily routine when metal implants are present within the scan volume as findings suggest it allows for radiation dose reduction and facilitates diagnosis relevant to further treatment.     

Deep Learning Subtraction Angiography: Improved Generalizability with Transfer Learning

PurposeTo investigate the utility and generalizability of deep learning subtraction angiography (DLSA) for generating synthetic digital subtraction angiography (DSA) images without misalignment artifacts.Materials and MethodsDSA images and native digital angiograms of the cerebral, hepatic, and splenic vasculature, both with and without motion artifacts, were retrospectively collected. Images were divided into a motion-free training set (n = 66 patients, 9,161 images) and a motion artifact–containing test set (n = 22 patients, 3,322 images). Using the motion-free set, the deep neural network pix2pix was trained to produce synthetic DSA images without misalignment artifacts directly from native digital angiograms. After training, the algorithm was tested on digital angiograms of hepatic and splenic vasculature with substantial motion. Four board-certified radiologists evaluated performance via visual assessment using a 5-grade Likert scale. Subgroup analyses were performed to analyze the impact of transfer learning and generalizability to novel vasculature.ResultsCompared with the traditional DSA method, the proposed approach was found to generate synthetic DSA images with significantly fewer background artifacts (a mean rating of 1.9 [95% CI, 1.1–2.6] vs 3.5 [3.5–4.4]; P = .01) without a significant difference in foreground vascular detail (mean rating of 3.1 [2.6–3.5] vs 3.3 [2.8–3.8], P = .19) in both the hepatic and splenic vasculature. Transfer learning significantly improved the quality of generated images (P < .001).ConclusionsDLSA successfully generates synthetic angiograms without misalignment artifacts, is improved through transfer learning, and generalizes reliably to novel vasculature that was not included in the training data.     

Radiofrequency Ablation for Benign Symptomatic Thyroid Nodules in the Netherlands: Successful Introduction of a Minimally Invasive Treatment Option Improving Quality of Life

PurposeTo determine whether adoption of radiofrequency (RF) ablation in patients with symptomatic benign thyroid nodules (SBTNs) in a Dutch regional thyroid network resulted in clinical success and improvement in health-related and thyroid-related quality of life (QoL).Materials and MethodsThe eligibility criteria for RF ablation were as follows: (a) nodule size between 2.0 and 5.0 cm, (b) solid component >20%; (c) benign cytology in 2 separate cytological assessments, and (d) symptoms unequivocally related to mechanical compression. The primary end point of this study was volume reduction 1 year after ablation. The secondary outcomes were health-related and thyroid-related QoL, measured using the short form health survey questionnaire (SF-36) and thyroid-specific patient-reported outcome questionnaire (ThyPRO-39), respectively, as well as adverse event rates.ResultsA total of 72 SBTNs in 67 patients were included. Median age was 50.0 (interquartile range, 41.0–56.0) years, and 91.0% were women. The median volume reduction at 6 weeks, 6 months, 1 year, 2 years, and 3 years was 51.0%, 63.9%, 65.2%, 81.3%, and 90.3%, respectively. The patients showed a significant improvement on the SF-36 physical component scale and ThyPRO-39 overall QoL-impact scale. An absolute improvement was seen in goiter and cosmetic complaints, determined using ThyPRO-39. The overall adverse event rate was 9.0%, of which 4.5% were considered major.ConclusionsRF ablation is an effective treatment option for SBTNs, with a significant volume reduction and improvement in health-related and thyroid-related QoL.     

A Pilot First-in-Human Study of Embrace,a Polyethylene Glycol-Based Liquid Embolic Agent,in the Embolization of Malignant and Benign Hypervascular Tumors

PurposeTo investigate the safety and efficacy of an aqueous polyethylene glycol-based liquid embolic agent, Embrace Hydrogel Embolic System (HES), in the treatment of benign and malignant hypervascular tumors.Materials and MethodsA prospective, single-arm, multicenter study included 8 patients, 5 males and 3 females, with a median age of 58.5 years (30–85 years), who underwent embolization in 8 tumors between October 2019 and May 2020. Technical success was defined as successful delivery of HES to the index vessel, with disappearance of >90% of the targeted vascular enhancement or, for portal vein embolization, occlusion of the portal branches to the liver segments for future resection. The volume of HES administered, ease of use (5 point Likert scale), administration time, and adverse events (AEs) were recorded. Evaluation was performed at 7, 30, and 90 days via clinical assessment and blood testing, and follow-up imaging was performed at 30 days.ResultsEight patients were enrolled, and 10 embolizations were performed in 8 lesions. Tumors included hepatocellular carcinoma (n = 4), renal angiomyolipoma (n = 3), and intrahepatic cholangiocarcinoma (n = 1). Technical success was 100%, and the average ease of use was 3.3 ± 1.0 SD. The HES delivery time was 1–28 minutes (median, 16.5 minutes), and the HES volume injected was 0.4–4.0 mL (median, 1.3 mL). All patients reached 30-day follow-up with imaging, and 6 patients reached 90-day follow-up. There were 3 serious AEs in 2 patients that were unrelated to the embolic agent.ConclusionHES resulted in a 100% embolization technical success rate. The product ease of use was acceptable, and no target vessel recanalization was noted on follow-up imaging at 30 days.     

The effect of tin prefiltration on extremity cone-beam CT imaging with a twin robotic X-ray system

IntroductionWhile tin prefiltration is established in various CT applications, its value in extremity cone-beam CT relative to optimized spectra has not been thoroughly assessed thus far. This study aims to investigate the effect of tin filters in extremity cone-beam CT with a twin-robotic X-ray system.MethodsWrist, elbow and ankle joints of two cadaveric specimens were examined in a laboratory setup with different combinations of prefiltration (copper, tin), tube voltage and current–time product. Image quality was assessed subjectively by five radiologists with Fleiss’ kappa being computed to measure interrater agreement. To provide a semiquantitative criterion for image quality, contrast-to-noise ratios (CNR) were compared for standardized regions of interest. Volume CT dose indices were calculated for a 16 cm polymethylmethacrylate phantom.ResultsRadiation dose ranged from 17.4 mGy in the clinical standard protocol without tin filter to as low as 0.7 mGy with tin prefiltration. Image quality ratings and CNR for tin-filtered scans with 100 kV were lower than for 80 kV studies with copper prefiltration despite higher dose (11.2 and 5.6 vs. 4.5 mGy; p < 0.001). No difference was ascertained between 100 kV scans with tin filtration and 60 kV copper-filtered scans with 75% dose reduction (subjective: p = 0.101; CNR: p = 0.706). Fleiss’ kappa of 0.597 (95% confidence interval 0.567–0.626; p < 0.001) indicated moderate interrater agreement.ConclusionConsiderable dose reduction is feasible with tin prefiltration, however, the twin-robotic X-ray system's low-dose potential for extremity 3D imaging is maximized with a dedicated low-kilovolt scan protocol in situations without extensive beam-hardening artifacts.Implications for practiceLow-kilovolt imaging with copper prefiltration provides a superior trade-off between dose reduction and image quality compared to tin-filtered cone-beam CT scan protocols with higher tube voltage.     

Endobronchial Navigation Guided by Cone-Beam CT–Based Augmented Fluoroscopy without a Bronchoscope: Feasibility Study in Phantom and Swine

PurposeTo evaluate the accuracy of cone-beam computed tomography (CT)-based augmented fluoroscopy (AF) image guidance for endobronchial navigation to peripheral lung targets.MethodsPrototypic endobronchial navigation AF software that superimposed segmented airways, targets, and pathways based on cone-beam CT onto fluoroscopy images was evaluated ex vivo in fixed swine lungs and in vivo in healthy swine (n = 4) without a bronchoscope. Ex vivo and in vivo (n = 3) phase 1 experiments used guide catheters and AF software version 1, whereas in vivo phase 2 (n = 1) experiments also used an endovascular steerable guiding sheath, upgraded AF software version 2, and lung-specific low-radiation-dose protocols. First-pass navigation success was defined as catheter delivery into a targeted airway segment solely using AF, with second-pass success defined as reaching the targeted segment by using updated AF image guidance based on confirmatory cone-beam CT. Secondary outcomes were navigation error, navigation time, radiation exposure, and preliminary safety.ResultsFirst-pass success was 100% (10/10) ex vivo and 19/24 (79%) and 11/15 (73%) for in vivo phases 1 and 2, respectively. Phase 2 second-pass success was 4/4 (100%). Navigation errors were 2.2 ± 1.2 mm ex vivo and 4.9 ± 3.2 mm and 4.0 ± 2.6 mm for in vivo phases 1 and 2, respectively. No major device-related complications were observed in the in vivo experiments.ConclusionsEndobronchial navigation is feasible and accurate with cone-beam CT-based AF image guidance. AF can guide endobronchial navigation with endovascular catheters and steerable guiding sheaths to peripheral lung targets, potentially overcoming limitations associated with bronchoscopy.     

Feasibility of extracellular volume fraction calculation using myocardial CT delayed enhancement with low contrast media administration

BackgroundMyocardial extracellular volume fraction (ECV) derived from CT delayed enhancement (CTDE) may allow assessment of diffuse myocardial fibrosis. However, the amount of contrast medium required for ECV estimation has not been established. Since ECV estimation by CT is typically performed in combination with coronary CT angiography (CCTA) in clinical settings, we aimed to investigate whether reliable ECV estimation is possible using the contrast dose optimized for CCTA without additional contrast administration.MethodsTwenty patients with known or suspected coronary artery disease who underwent CTDE with a dual-source scanner using two protocols (Protocols A and B) within 2 years were retrospectively enrolled. In Protocol A, CTDE was obtained with 0.84 ml/kg of iopamidol (370 mgI/ml) injected for CCTA. In Protocol B, stress CT perfusion imaging, which requires 40 ml of contrast medium, was added to Protocol A. ECV values calculated from the two protocols were compared.ResultsDespite the different contrast doses, no significant difference in mean myocardial ECV was seen between Protocols A and B at the patient level (28.7 ± 4.3% vs. 28.7 ± 4.4%, respectively, P = 0.868). Excellent correlations in ECV were seen between the two protocols (r = 0.942, P < 0.001). Bland-Altman analysis showed slight bias (+0.06%), within a 95% limit of agreement of −2.9% and 3.0%. The coefficient of variation was 5.2%.ConclusionReliable ECV estimation can be achieved with the contrast doses optimized for CCTA. Despite the differing contrast administration schemes and doses, ECV values calculated from the two protocols showed excellent agreement, indicating the robustness of ECV estimation by CT.     

Artificial intelligence machine learning-based coronary CT fractional flow reserve (CT-FFRML): Impact of iterative and filtered back projection reconstruction techniques

BackgroundThe influence of computed tomography (CT) reconstruction algorithms on the performance of machine-learning-based CT-derived fractional flow reserve (CT-FFR_ML) has not been investigated. CT-FFR_ML values and processing time of two reconstruction algorithms were compared using an on-site workstation.MethodsCT-FFR_ML was computed on 40 coronary CT angiography (CCTA) datasets that were reconstructed with both iterative reconstruction in image space (IRIS) and filtered back-projection (FBP) algorithms. CT-FFR_ML was computed on a per-vessel and per-segment basis as well as distal to lesions with ≥50% stenosis on CCTA. Processing times were recorded. Significant flow-limiting stenosis was defined as invasive FFR and CT-FFR_ML values ≤ 0.80. Pearson's correlation, Wilcoxon, and McNemar statistical testing were used for data analysis.ResultsPer-vessel analysis of IRIS and FBP reconstructions demonstrated significantly different CT-FFR_ML values (p ≤ 0.05). Correlation of CT-FFR_ML values between algorithms was high for the left main (r = 0.74), left anterior descending (r = 0.76), and right coronary (r = 0.70) arteries. Proximal and middle segments showed a high correlation of CT-FFR_ML values (r = 0.73 and r = 0.67, p ≤ 0.001, respectively), despite having significantly different averages (p ≤ 0.05). No difference in diagnostic accuracy was observed (both 81.8%, p = 1.000). Of the 40 patients, 10 had invasive FFR results. Per-lesion correlation with invasive FFR values was moderate for IRIS (r = 0.53, p = 0.117) and FBP (r = 0.49, p = 0.142). Processing time was significantly shorter using IRIS (15.9 vs. 19.8 min, p ≤ 0.05).ConclusionCT reconstruction algorithms influence CT-FFR_ML analysis, potentially affecting patient management. Additionally, iterative reconstruction improves CT-FFR_ML post-processing speed.     

A Motion Artifact Correction Algorithm for Cone-Beam CT in Patients with Hepatic Malignancies Treated with Transarterial Chemoembolization

PurposeTo evaluate the effect of a motion artifact correction algorithm (MACA) on cone-beam computed tomography (CT) during transarterial chemoembolization for hepatic malignancies.Materials and MethodsFrom June 2020 to March 2021, 42 patients with mild-to-severe motion artifacts detected using single cone-beam CT scans were evaluated retrospectively. The image quality of native and motion-corrected data was compared. The maximum intensity, sharpness, and full width at half maximum (FWHM) of 5 segmental hepatic arteries were quantitatively measured. The overall quality of maximum intensity projection (MIP) images, conspicuity of tumor-supplying arteries, and need for selective angiography to ascertain the vascular anatomy were qualitatively evaluated by multiple readers. Paired t and Wilcoxon signed rank tests were used to compare the parameters.ResultsThe mean maximum intensity and sharpness increased from 2,792.01 HU ± 451.36 to 3,148.40 HU ± 594.46 and from 0.31 ± 0.02/mm to 0.34 ± 0.02/mm, respectively, using the MACA (both P < .001). The MACA decreased the mean FWHM from 2.02 mm ± 0.27 to 1.78 mm ± 0.26 (P < .001). The overall quality of the MIP images and the conspicuity of the tumor-supplying artery were enhanced from 2.5 to 3.0 points and from 3.0 to 4.0 points, respectively (both P < .001). Selective angiography was expected to be omitted in 7 cases (16.7%, 7/42) after using the MACA.ConclusionsThe MACA significantly improved both quantitative and qualitative image quality of cone-beam CT in selected patients with motion artifacts during transarterial chemoembolization for hepatic malignancies.     

Improving Cone-Beam CT Angiography for Prostatic Artery Embolization: Is a Low-Dose Protocol Equivalent to the Standard?

PurposeTo compare the utility of low-dose versus standard cone-beam computed tomography (CT) angiography protocols in identifying nontarget embolization (NTE) during prostatic artery embolization (PAE).Materials and MethodsA prospective, single-center, Phase-1 study (NCT02592473) was conducted for lower urinary tract symptoms in benign prostatic hyperplasia. Prostate volume, international prostate symptom score (IPSS), quality of life score (QoL), International Index of Erectile Function (IIEF), peak flow rate, UCLA Prostate Cancer Index (UCLA-PCI), and postvoid residual were recorded at baseline and 1, 3, 6, 12, and 24-months after PAE. Six-second (standard protocol, n = 29) or 5-second (low-dose protocol n = 45) rotations were made. Images were selected and matched in pairs by areas of NTE and compared by readers using a binomial generalized estimating equation model. Procedural outcomes were analyzed using a linear mixed model.ResultsSeventy-four cone-beam CT angiographies were performed in 21 patients. IPSS and QoL scores significantly improved (P <.05). There was no change in UCLA-PCI or IIEF scores. Dose area product of the low- and standard-dose protocol were 37,340.82 mGy·cm² ± 104.66 and 62,645.66 mGy·cm² ± 12,711.48, respectively, representing a dose reduction of 40.4%. A total of 120 comparisons showed no preference between the 2 protocols (P =.24). Observers identified 76 and 69 instances of NTE in the standard- and low-dose protocols, respectively (P =.125).ConclusionsLow-dose cone-beam CT angiography achieved equivalent clinical utility in identifying NTE during PAE, with the advantage of a lower radiation dose.     

High-Frequency Irreversible Electroporation Using 5,000-V Waveforms to Create Reproducible 2- and 4-cm Ablation Zones—A Laboratory Investigation Using Mechanically Perfused Liver

PurposeTo investigate if high-frequency irreversible electroporation (H-FIRE) treatments can be delivered at higher voltages and with greater energy delivery rates than currently implemented in clinical irreversible electroporation protocols.Materials and MethodsTreatments using 3,000 V and 5,000 V were administered to mechanically perfused ex vivo porcine liver via a single applicator and grounding pad (A+GP) as well as a 4-applicator array (4AA). Integrated energized times (IET) 0.01–0.08 seconds and energy delivery rates 25–300 μs/s were investigated. Organs were preserved at 4°C for 10–15 hours before sectioning and gross analysis using a metabolic stain to identify the size and shape of ablation zones.ResultsA+GP ablations measured between 1.6 cm and 2.2 cm, which did not increase when IET was increased from 0.02 seconds to 0.08 seconds (P > .055; range, 1.9–2.1 cm). Changes in tissue color and texture consistent with thermal damage were observed for treatments with energy delivery rates 50–300 μs/s, but not for treatments delivered at 25 μs/s. Use of the 4AA with a 3-cm applicator spacing resulted in ablations measuring 4.4–4.9 cm with energy delivery times of 7–80 minutes.ConclusionsH-FIRE treatments can rapidly and reproducibly create 2-cm ablations using an A+GP configuration. Treatments without thermal injury were produced at the expense of extended treatment times. More rapid treatments resulted in ablations with varying degrees of thermal injury within the H-FIRE ablation zone. Production of 4-cm ablations is possible using a 4AA.     

Evaluation of optimised 3D turbo spin echo and gradient echo MR pulse sequences of the knee at 3T and 1.5T

IntroductionTo investigate the impact of parameter optimisation for novel three-dimensional 3D sequences at 1.5T and 3T on resultant image quality.MethodsFollowing institutional review board approval and acquisition of informed consent, MR phantom and knee joint imaging on healthy volunteers (n = 16) was performed with 1.5 and 3T MRI scanners, respectively incorporating 8- and 15-channel phased array knee radiofrequency coils. The MR phantom and healthy volunteers were prospectively scanned over a six-week period. Acquired sequences included standard two-dimensional (2D) turbo spin echo (TSE) and novel three-dimensional (3D) TSE PDW (SPACE) both with and without fat-suppression, and T21W gradient echo (TrueFISP) sequences. Signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) were measured for knee anatomical structures. Two musculoskeletal radiologists evaluated anatomical structure visualisation and image quality. Quantitative and qualitative findings were investigated for differences using Friedman tests. Inter- and intra-observer agreements were determined with κ statistics.ResultsPhantom and healthy volunteer images revealed higher SNR for sequences acquired at 3T (p-value <0.05). Generally, the qualitative findings ranked images acquired at 3T higher than corresponding images acquired at 1.5T (p < 0.05). 3D image data sets demonstrated less sensitivity to partial volume averaging artefact (PVA) compared to 2D sequences. Inter- and intra-observer agreements for evaluation across all sequences ranged from 0.61 to 0.79 and 0.71 to 0.92, respectively.ConclusionBoth 2D and 3D images demonstrated higher image quality at 3T than at 1.5T. Optimised 3D sequences performed better than the standard 2D PDW TSE sequence for contrast resolution between cartilage and joint fluid, with reduced PVA artefact.Implications for practiceWith rapid advances in MRI scanner technology, including hardware and software, the optimisation of 3D MR pulse sequences to reduce scan time while maintaining image quality, will improve diagnostic accuracy and patient management in musculoskeletal MRI.     

Effect of high- and low-energy entrance surface dose allocation ratio for two-shot dual-energy subtraction imaging on low-contrast resolution

IntroductionDual-energy subtraction (DES) imaging can obtain chest radiographs with high contrast between nodules and healthy lung tissue, and evaluating of chest radiography and evaluating exposure conditions is crucial to obtain a high-quality diagnostic image. This study aimed to investigate the effect of the dose allocation ratio of entrance surface dose (ESD) between high- and low-energy projection in low-contrast resolution of soft-tissue images for two-shot DES imaging in digital radiography using a contrast-detail phantom (CD phantom).MethodsA custom-made phantom mimicking a human chest that combined a CD phantom, polymethylmethacrylate square plate, and an aluminum plate (1–3 mm) was used. The tube voltage was 120 kVp (high-energy) and 60 kVp (low-energy). The ESD was changed from 0.1 to 0.5 mGy in 0.1 mGy increments. Dose allocation ratio of ESD between 120 kVp and 60 kVp projection was set at 1:1, 1:2, 1:3, and 2:1. Inverse image quality figure (IQF_inv) was calculated from the custom-made phantom images.ResultsWhen the total ESD and aluminum thickness were constant, no significant difference in IQF_inv was observed under most conditions of varied dose allocation ratio. Similarly, when the total ESD and the dose allocation ratio were constant, there was no significant difference in IQF_inv based on the aluminum plate thickness.ConclusionUsing IQF_inv to evaluate the quality of the two-shot DES image suggested that dose allocation ratio did not have a significant effect on low-contrast resolution of soft-tissue images.Implications for practiceThe present results provide useful information for determining exposure conditions for two-shot DES imaging.     

Importance of imaging-acquisition protocol and post-processing analysis for extracellular volume fraction assessment by computed tomography

BackgroundComputed tomography angiography (CTA) assessment of myocardial extracellular volume fraction (CT-ECV) is feasible, although the protocols for imaging acquisition and post-processing methodology have varied. We aimed to identify a pragmatic protocol for CT-ECV assessment encompassing both imaging acquisition and post-processing methodologies to facilitate its clinical implementation.MethodsWe evaluated consecutive patients with severe aortic stenosis undergoing evaluation for transcatheter aortic valve replacement (TAVR). Pre-contrast and 3-min-delayed CTA were obtained in systole using either helical prospective-ECG-triggered (high-pitch) or axial sequential-ECG-gated acquisition, adding to standard TAVR CTA protocol. Using a dedicated software for co-registration of CTA datasets, three methodologies for ECV measurement were evaluated: (1) mid-septum region of interest (Septal ECV), (2) averaged-global ECV (Global ECV) encompassing 16-AHA segments, and (3) average of septal and lateral segments (Averaged ECVsep and Averaged ECVlat).ResultsAmong the 142 patients enrolled (median ​= ​81 years, 44% females), 8 were excluded due to significant imaging artifacts precluding Global ECV assessment. High-pitch scan mode was performed in 68 patients (48%). Suboptimal image quality for Global ECV assessment was associated with high-pitch scan mode (odds ratio: OR ​= ​2.26, p ​= ​0.036), along with the presence of intracardiac leads (OR ​= ​4.91, p ​= ​0.002), and BMI≥35 ​kg/m² (OR ​= ​2.80, p ​= ​0.026). Septal ECV [median ​= ​29.4%] and Averaged ECVsep [29.0%] were similar (p ​= ​0.108), while Averaged ECVlat [27.5%] was lower than Averaged ECVsep (p ​< ​0.001), resulting in lower Global ECV [28.6%].ConclusionsMyocardial CT-ECV assessment is feasible using a systolic sequential acquisition pre-contrast, and similar additional 3-min delayed scan. Septal ECV measurement provides similar values to Global ECV and is equally reproducible.