Is the postretention relapse of maxillary and mandibular incisor alignment related?

Previous studies suggest a poor association between initial and postretention pattern of incisor irregularity. One explanation may be that the incisor movements are limited by the boundaries provided by the incisors in the opposite arch. If so, postretention malalignment of the maxillary and mandibular incisors may be related. To test this hypothesis, long-term postretention study models of 96 patients with acceptable occlusion at the time of appliance removal were examined. The occlusal surfaces of the postretention study models were photocopied, and tooth anatomical contact points were digitized. An algorithm was used to fit the dental arch to the digitized points. The amount of incisor rotation and anatomical contact point displacement of maxillary and mandibular anterior teeth, relative to their respective dental arches, were computer generated. Overbite, the number of occlusal contact points in the anterior segment, and concavity of the lingual surfaces of the maxillary incisors were recorded manually. Statistical analyses demonstrated a significant association (P <.05) between the overall irregularity of the maxillary and mandibular incisors. The association did not differ among subgroups that were stratified according to overbite or number of occlusal contacts. No associations were found for the overall amount of incisor rotation in the 2 arches (P >.05). The amount and direction of displacement of antagonistic pairs of maxillary and mandibular central incisors were also associated (P <.05), but not the amount and direction of rotation (P >.05). The lingual configuration of the maxillary incisors did not affect the pattern of mandibular incisor malalignment.     

Comparison of treatment outcome and stability between distraction osteogenesis and LeFort I osteotomy in cleft patients with maxillary hypoplasia

The purpose of this study was to compare treatment outcome and relapse between maxillary advancement surgery with LeFort I osteotomy and maxillary distraction osteogenesis in patients with cleft lip and palate with maxillary hypoplasia. The sample consisted of a maxillary advancement surgery with LeFort I osteotomy group (group 1, N= 14, mean age, 21.7 years) and a maxillary distraction osteogenesis group (group 2, N = 11, mean age, 16.3 years). Lateral cephalograms were taken and traced at presurgery (T0), postsurgery (T1), and postretention (T2). Nine hard and four soft tissue cephalometric variables were measured. Differences in measurements at each stage, treatment outcome (T1-T0), and relapse (T2-T1) were compared between groups with independent t test. Because the amount of surgical movement could affect the amount of relapse, a difference in relapse between two groups was compared by analysis of covariance with the amount of surgical movement as a covariant. Although the amounts of forward movements of A point (P < 0.01), upper incisor (P < 0.001), and upper lip (P < 0.001) during T1-T0 were greater in group 2, there were no significant differences in the amounts of relapse (T2-T1) between the two groups. During T1-T0, counterclockwise rotation of the palatal plane was observed in group 2 as a result of downward movement of posterior nasal spine (PNS) at T1, whereas group 1 had clockwise rotation of palatal plane at T1 because of downward movement of anterior nasal spine (ANS). The amounts of relapse (T2-T1) in vertical movements of PNS and upper incisor were significantly different between the two groups (P < 0.05). The amount of required maxillary advancement, vector control of palatal plane, and vertical position of upper incisor would be important factors when planning a surgical treatment in patients with cleft lip and palate with midface hypoplasia.     

Evaluation of posttreatment changes in Class II Division 1 patients after nonextraction orthodontic treatment: cephalometric and model analysis.

BACKGROUND: The aim of this retrospective study was to evaluate changes in patients with Class II Division 1 malocclusions treated with cervical headgear and full fixed orthodontic appliances and without extractions. METHODS: Lateral cephalograms and dental casts of 18 patients were obtained at the beginning and the end of treatment and at the postretention period. Pretreatment records were taken at 11.9 +/- 2.6 years, and the mean treatment time was 2.8 +/- 1.2 years. All patients were asked to use maxillary and mandibular Hawley retainers for 1 year. The average postretention interval was 5.3 years. RESULTS: The assessment of cephalometric findings showed that maxillary growth was restricted; maxillary incisor inclination, overjet, and overbite were decreased; the mandibular incisors were proclined; and a slight mandibular posterior rotation occurred at the end of treatment. At the postretention period, the maxilla remained stable, the mandible moved anteriorly, and the overjet increased slightly (1.25 mm, P < .01). The dental cast changes indicated that both maxillary and mandibular irregularity index values decreased significantly during treatment but increased after 5 years. Mandibular intercanine width decreased 0.47 mm ( P < .01) during the postretention period. CONCLUSIONS: The redirection of maxillary growth remained stable in patients with Class II malocclusions treated with cervical headgear and fixed orthodontic appliances and without extractions, but treatment-induced mandibular rotations tended to return to their original patterns. Various dental changes occurred during the postretention period.     

Cephalometric appraisal of posttreatment vertical changes in adult orthodontic patients.

The purpose of this study was to evaluate vertical facial changes in adult orthodontic patients and to evaluate the stability of these changes. Thirty-three patients (8 males and 25 females) were examined. The patients had been treated with full fixed edgewise appliance mechanics and exhibited at least 1.0 degrees of clockwise rotation of the mandible during treatment. Mandibular rotation was determined by the angular change in the Y-axis to the Frankfort plane. Twelve angular and 14 linear skeletal and dental measurements and 3 skeletal ratios were derived from pretreatment (T1), posttreatment (T2), and postretention (T3) cephalometric radiographs. Paired t tests were used to compare vertical changes that occurred as a result of orthodontic treatment and their stability or relapse tendency during the retention and postretention periods. Twenty-five percent (P <.001) of the opening rotation of the mandible recovered during the posttreatment period, resulting in a significant overall rotation that was maintained. Both treatment and posttreatment changes in the Y-axis angle showed a high correlation with the horizontal position of pogonion (r = -0.797 and -0.889, respectively). Only overjet showed a low correlation between treatment changes and posttreatment changes in the Y-axis angle. Stepwise regression analysis of pretreatment variables and treatment changes failed to predict the behavior of the Y-axis angle change.     

Occlusal plane canting reduction accompanies mandibular counterclockwise rotation in camouflaging treatment of hyperdivergent skeletal Class II malocclusion

ObjectiveTo investigate the occlusal configurations of the hyperdivergent skeletal Class II malocclusion and their alterations during the camouflaging treatment in an attempt to identify occlusal changes that might be related to mandibular counterclockwise rotation.Materials and MethodsCephalograms of 126 subjects with hyperdivergent skeletal Class II malocclusion and 126 subjects with a clinically normal skeletal pattern were chosen. Several measurements were calculated and compared between the groups. To examine the effects of treatment, two groups were established according to mandibular rotation: counterclockwise rotation (CCR) and the opposite clockwise rotation (CR). After 40 subjects were excluded, the other 86 Class II subjects were assigned to CCR (n  =  22) and CR (n  =  64). Their pretreatment (T1), posttreatment (T2), and postretention (T3) cephalograms were obtained. Measurement changes (T3-T1) were analyzed in each group and compared between groups.ResultsCompared with the normal skeletal pattern, the cant of the occlusal plane (OP) of the study subjects was significantly steeper and the vertical heights of the incisors were significantly larger for the malocclusion. Compared with the changes in CR, there was a prominent reduction of the OP canting with remarkable intrusion of the maxillary incisor in CCR.ConclusionIncreased OP canting with overerupted incisors is evident in the hyperdivergent skeletal Class II malocclusion. During the camouflaging treatment, reduction of OP canting could occur. It was accompanied by mandibular counterclockwise rotation and intrusion of the maxillary incisor.     

Very early face mask therapy in Class III children.

The purpose of this study was to examine the effects of very early face mask therapy in children with Class III malocclusion. At pretreatment (T0), 40 female subjects who were eventually treated showed a more severe Class III pattern (ANB 0.1 degrees) than did 28 skeletal Class III female subjects who remained untreated (ANB 0.4 degrees), as observed in the Wits analysis. Posttreatment results (T1) showed significant (p<0.01) anterior advancement of the maxillary components, backward rotation of the mandible without increased lower anterior facial height, and an improved incisor relationship. Comparison of posttreatment (T1) and postretention (T2) records, however, revealed no increase in SNA in the treated group. SNA did increase in the untreated group, with no significant difference in ANB angle. The x-components of B-point and Me showed a significant (p<0.05) difference between the two groups. At postretention (T2), N-S-Ba, N-S-Ar, and CC-Ba tended to increase more in the treated group than in the untreated group.     

Linear and angular filipino cephalometric norms according to age and sex

OBJECTIVE: To quantify relevant cephalometric parameters for Filipinos according to age and sex. MATERIALS AND METHODS: A total of 157 Filipino subjects (78 males, 79 females) who fulfilled specific criteria were selected from elementary, high school, and college students affiliated with Manila Central University. They were divided into comparison groups (GI, GII, GIII, and GIV) on the basis of chronological age and sex. Lateral cephalograms were taken for all subjects, and the mean and standard deviation for each parameter was recorded and compared among groups. RESULTS: The male group had a longer anterior cranial base (S-N), total facial height (N-Me), longer lower anterior facial height (N-ANS), longer ramus height (Cd-Go), longer lower posterior dentoalveolar height (Mo-Mi'), and total mandibular length (Gn-Cd) than the female group. All these linear measurements were statistically significantly different between males and females in GI, GIII, and GIV. On the other hand, SNB angle showed significant differences (P = .0271) in GIV only. In the lower third of the face, significant opposite tendencies were found in GIV. The female group showed a clockwise rotation, whereas the male counterpart had a counterclockwise rotation of the mandibular plane. The denture pattern of both groups was characterized by a proclination of both lower incisor (Ii to MP) and upper incisor (Is to SN). CONCLUSIONS: Convexity due to dentoalveolar protrusion is the naturally occurring facial profile for Filipinos. The adult females showed steeper mandibular and occlusal plane angles than the male samples.     

A long-term study of the relationship of third molars to changes in the mandibular dental arch

The purpose of this study is to determine the relationship of third molars to changes in the mandibular dental arch. The sample for this study consisted of four groups and subgroups. The groups consisted of premolar extraction treated, nonextraction treated with initial generalized spacing, nonextraction treated, and serial extraction untreated subjects. The subgroups were divided into persons who had mandibular third molars that were either impacted, erupted into function, congenitally absent, or extracted at least 10 years before postretention records. The mean postretention time interval was 13 years, with a range of 10 to 28 years. The mean postretention age was 28 years 6 months, with a range of 18 years 6 months to 39 years 4 months. Two-way analysis of variance with repeated measures was used to compare the changes over time (before treatment, at end of active treatment, and after retention) of groups and third molar subgroups. With time, mandibular incisor irregularity increased while arch length and intercanine width decreased. The eruption patterns of mandibular incisors and first molars were similarly dispersed in all groups studied. The findings between the subgroups in which mandibular third molars were impacted, erupted into function, congenitally absent, or extracted 10 years before postretention records revealed no significant differences between any of the subgroups for the parameters studied. No significant differences in mandibular growth were found between the third molar subgroups; this suggests that persons with third molars erupted into satisfactory function do not have a significantly different mandibular growth pattern than those whose third molars are impacted or congenitally missing. In the majority of cases some degree of mandibular incisor crowding took place after retention, but this change was not significantly different between third molar subgroups. This finding suggests that the recommendation for mandibular third molar removal with the objective of alleviating or preventing mandibular incisor irregularity may not be justified.     

Nonextraction orthodontic therapy: posttreatment dental and skeletal stability

To assess the long-term stability of nonextraction orthodontic treatment, the dental cast and cephalometric records of 28 cases were evaluated. Thirty cephalometric and seven cast parameters were examined before treatment, posttreatment, and an average of almost 8 years postretention. Results showed overall long-term stability to be relatively good. Relapse patterns seen were similar in nature, but intermediate in extent, between untreated normals and four first premolar extraction cases. Significant decreases were seen in arch length and intercanine width during the postretention period despite minimal changes during treatment. Incisor irregularly increased slightly postretention; intermolar width, overjet, and overbite displayed considerable long-term stability. Mandibular incisor mesiodistal and faciolingual dimensions were not associated with either pretreatment or posttreatment incisor crowding. Class II malocclusions with large ANB values and shorter mandibular lengths showed increased incisor irregularity, shorter arch lengths, and deeper overbites at the postretention stage, suggesting that the amount and direction of facial growth may have been partially responsible for maturational changes seen during the postretention period.     

Mandibular incisor alignment and dental arch changes 1 year after extraction of deciduous canines

This study investigated the early effects on mandibular incisor irregularity and rotation together with dental arch dimensions of the extraction of four deciduous canines. Children, during early mixed dentition, were randomized into one extraction (n = 32) and one control (n = 41) group. Dental casts from baseline (T0) and 1 year follow-up (T1) were used to evaluate changes in the irregularity index and in mandibular incisor rotation, dental arch dimensions, overjet, and overbite. Median mandibular incisor irregularity decreased over time, significantly more in the extraction than the control group (1.2 versus 0.7 mm; P < 0.01), with wide ranges in both groups. Rotational changes greater than 10 degrees for lateral incisors were twice as common in the extraction group (42 versus 20 per cent; P < 0.01). Central incisors displayed only minor changes in both groups. The correlation between changes in irregularity index and changes in incisor rotation was weak in both groups (r(s) < 0.3 not significant). According to professional assessment of overall alignment, 84 per cent in the extraction group versus 34 per cent in the control group (P < 0.001) improved from T0 to T1. A significant decrease in maxillary and mandibular arch length and circumference from T0 to T1 was recorded in the extraction group (1.3, 1.1 mm and 2.4, 2.0 mm, respectively; P < 0.001), while arch dimensions were preserved in the control group. To conclude, 1 year after extraction of the deciduous canines, small improvements in mandibular incisor alignment were seen, together with reduced arch dimensions. Little's index underestimated malalignment related to tooth rotation.     

An evaluation of growth and stability in untreated and treated subjects

This retrospective longitudinal study compared skeletal and dental changes in orthodontically treated patients with changes in a comparable untreated group to evaluate the relationship between skeletal changes and mandibular incisor crowding. Cephalograms and models of 44 untreated subjects from the Broadbent-Bolton Growth Study and 43 treated patients were evaluated at "posttreatment" (14.3 +/- 1.5 and 15.2 +/- 1.1 years, respectively) and at "postretention" (23.2 +/- 3.4 and 28.9 +/- 3.6 years, respectively). Cranial base and mandibular superimpositions were used to measure cephalometric changes. Tooth-size-arch-length discrepancy, contact irregularity, and space irregularity were measured. In both groups, growth in the vertical dimension was twice that in the horizontal dimension. The untreated subjects, who were younger, exhibited greater yearly vertical growth increments than did the treated subjects. The treated subjects exhibited greater overjet and overbite increases than did the untreated subjects. Yearly changes in tooth-size-arch-length discrepancy were greater in the untreated than in the treated subjects, but there were no differences in the changes in irregularity between the 2 groups. A multivariate regression model, relating posterior facial height (Ar-Go) increase and lower incisor eruption to change in space irregularity, explained 42% of the variation in the untreated group (r = 0.64; P <.001). A weaker relationship was found in the treated group. Overjet change was negatively correlated with tooth-size-arch-length discrepancy. Changes in lower incisor crowding were related to growth in the vertical dimension and lower incisor eruption in both untreated (r = 0.64) and treated (r = 0.51) subjects.     

Skeletal and dental changes in the sagittal, vertical, and transverse dimensions after rapid palatal expansion.

The purpose of this study was to examine the maxillary and mandibular responses to rapid palatal expansion (RPE) in all 3 dimensions. Twenty children (average age, 11.7 years) who required RPE treatment were included in this study. Pre- (T1) and post-RPE (T2) lateral and posteroanterior (PA) cephalograms and study models were taken for all patients. For each patient, lateral and PA cephalograms at T1 and T2 were traced, and the sagittal, vertical, and transverse measurements were made. In addition, on the pre- and postexpansion models, the widths between the first premolars, the first molars, and the two acrylic halves of the Haas-type expander were measured. Results showed that from T1 to T2, the mean SNA increased 0.35 degrees (P < .05) and ANB increased 1.00 degrees (P < .05). Both the ANS and PNS moved downward (1.30 mm and 1.43 mm, respectively, P < .05), and the mandibular plane angle (MP-SN) increased 1.72 degrees (P < .05). The maxillary and mandibular incisors did not change significantly after RPE. After RPE, the mean increase of maxillary interpremolar width, maxillary intermolar width, maxillary width (J-J), nasal width, and interorbital width were found to be 110.7%, 104.5%, 30.1%, 23.1%, and 3.3% of the screw expansion, respectively. After RPE treatment in children, the maxilla displaced slightly forward and downward (P < .05); the mandible rotated downward and backward, and the anterior facial height increased significantly (P < .05); and the widths of the maxilla and nasal cavity increased significantly (P < .05).     

Aging in the craniofacial complex

OBJECTIVE: To describe the dental arch changes occurring after adolescence through the sixth decade of life. MATERIALS AND METHODS: Longitudinal dental casts from 40 patients (20 male and 20 female) were digitized and analyzed. Measurements were recorded after the presumed cessation of circumpubertal growth (T1), at approximately 47 years of age (T2), and at least one decade later (T3) were compared. RESULTS: The majority of the measurements were found to have a significant time effect, demonstrating at least some level of change throughout the aging process (T1-T3). Exceptions to this observation were the posterior maxillary arch width measurements, mandibular intermolar and interpremolar (as measured at the second premolars) widths, the maxillary incisor irregularity index, overjet, overbite, and curve of Spee. The T1-T3 changes reflected for the most part the T1- T2 changes, while the T2-T3 changes affected overall modifications only for the mandibular intercanine width and maxillary depth, as measured at the second premolars. All changes reflected a decrease in arch width, depth, and perimeter, with a significant increase in the mandibular incisor irregularity index. CONCLUSIONS: The dental arches continue to change and adapt throughout life and into the sixth decade, though the degree of change decreases with time.     

Effects of orthodontic treatment on mandibular rotation and displacement in Angle Class II division 1 malocclusions

The aim of this retrospective cephalometric study was to investigate the effects of orthodontic treatment on rotation and displacement of the mandible in Angle Class II, division 1 malocclusions. Thirty patients in the treated group (15 boys and 15 girls; mean age at pretreatment, 12.27 +/- 1.36 years) were compared with 28 subjects who had untreated Class II, division 1 malocclusions (15 boys and 13 girls; mean age at T1, 12.01 +/- 0.07 years). The patients in the first group were treated nonsurgically, without extraction, and without the use of functional appliances. Cephalometric data were obtained from three lateral cephalograms per case representing pretreatment (T1), posttreatment (T2), and at least 2-years postretention (T3). Thirty-seven variables were measured representing craniofacial morphology, tooth measurements, and mandibular displacement. Some variables were obtained from cranial base, maxillary, or mandibular superimposition. Statistical significance was established at P < .05, P < .01, and P < .001. The findings indicated that orthodontic treatment of Class II, division 1 malocclusions induced a more vertical mandibular growth direction associated with an increased vertical displacement of pogonion. Occlusal or vertical movement of maxillary and mandibular molars was not correlated to mandibular rotation or horizontal displacement of pogonion. When compared with controls, the treated group did not exhibit a significant difference in mandibular rotation or occlusal movement of maxillary molars; however, it did show a greater occlusal movement of mandibular molars during treatment.     

Evaluation of the relationship between the anterior component of occlusal force and postretention crowding.

The aim of this study was to investigate whether a relationship exists between the anterior component of occlusal force (ACF) and postretention crowding in the mandibular incisor area. The study group comprised 32 adults who had undergone fixed orthodontic treatment in the department clinic at Marmara University in Istanbul, Turkey. In 13 subjects, the mandibular arch was treated without extractions; in 19, it was treated with bilateral first premolar extractions. The average postretention period was 3.5 years. The ACF created in the left side of the mandibular dentition was determined by measuring interdental frictional forces at each contact point mesial to the first molar and distal to the canine. Anatomic contact point displacements between the left mandibular anterior teeth (lateral incisor-canine, central incisor-lateral incisor, and central incisor-central incisor) were measured on plaster casts and summed to provide the irregularity index for these teeth. Correlation analysis was used to assess the relationship between the ACF values at each contact and the irregularity index. In the nonextraction group, statistically significant positive correlations were observed between the ACF and the irregularity index at the 3 contact points that were measured. The strongest correlation was found at the canine-first premolar contact (r = 0.65). In the extraction group, a positive correlation was found between the ACF and the irregularity index (r = 0.49, P <.05) at the second premolar-first molar contact, but no correlation was found at the canine-second premolar contact.     

Herbst treatment of Class II division 1 malocclusions in retrognathic and prognathic facial types

OBJECTIVE: The aim of this retrospective pilot study was to analyze and compare the short-term and long-term changes of Herbst treatment in Class II division 1 subjects of the retrognathic and prognathic facial type. MATERIALS AND METHODS: The subject material comprised 10 retrognathic (mean SNA = 74.5 degrees, SNB = 70.4 degrees, ML/NSL = 41.1 degrees) and 16 prognathic (mean SNA = 86.7 degrees, SNB = 81.5 degrees, ML/NSL = 25.1 degrees) Class II division 1 subjects treated with the Herbst appliance for an average period of 7 months. Lateral head films from before (T1), immediately after (T2), 12 months after (T3), and 39 months after (T4) Herbst treatment were analyzed with the SO-analysis (analysis of changes in sagittal occlusion) and standard cephalometrics. RESULTS: During the treatment period (T2-T1) the two facial type groups showed similar favorable changes for all variables. During the posttreatment periods of 12 months (T3-T2) and 39 months (T4-T2) recovering changes occurred. In the long-term, a tendency of more unfavorable growth changes was stronger (not significant) for retrognathic subjects than for prognathic subjects. CONCLUSION: On a long-term basis, retrognathic subjects are prone to exhibit more unfavorable mandibular growth changes than prognathic subjects and, thus, might exhibit a greater risk for an occlusal relapse when a stable Class I occlusion is not attained after treatment.     

Mandibular second premolar extraction--postretention evaluation of stability and relapse

The dental casts and cephalometric radiographs of 46 patients, treated with mandibular second premolar extraction and edgewise orthodontic mechanotherapy, were evaluated for changes over a minimum 10-year postretention period. The sample was divided into two groups: early (mixed dentition) extraction of mandibular second premolars and late (permanent dentition) extraction of mandibular second premolars. Results showed no difference in long-term stability between the two groups. Arch length and arch width decreased with time and incisor irregularity increased throughout the postretention period. No predictors or associations could be found to help the clinician in determining the long-term prognosis in terms of stability. The sample was regrouped according to the postretention degree of incisor irregularity. Statistically significant differences in cephalometric measurements were found between the minimally crowded group and the moderately to severely crowded group.     

Predictors of postretention stability of mandibular dental arch dimensions in patients treated with a lip bumper during mixed dentition followed by fixed appliances

Objective:To identify which dental and/or cephalometric variables were predictors of postretention mandibular dental arch stability in patients who underwent treatment with transpalatal arch and lip bumper during mixed dentition followed by full fixed appliances in the permanent dentition.Materials and Methods:Thirty-one patients were divided into stable and relapse groups based on the postretention presence or absence of relapse. Intercuspid, interpremolar, and intermolar widths; arch length and perimeter; crowding; and lower incisor proclination were evaluated before treatment (T0), after lip bumper treatment (T1), after fixed appliance treatment (T2), and a minimum of 3 years after removal of the full fixed appliance (T3). Logistic regression analyses were performed to evaluate the effect of changes between T0 and T1, as predictive variables, on the occurrence of relapse at T3.Results:The model explained 53.5 % of the variance in treatment stability and correctly classified 80.6 % of the sample. Of the seven prediction variables, intermolar and interpremolar changes between T0 and T1 (P = .024 and P = .034, respectively) were statistically significant. For every millimeter of increase in intermolar and interpremolar widths there was a 1.52 and 2.70 times increase, respectively, in the odds of having stability. There was also weak evidence for the effect of sex (P = .047).Conclusions:The best predictors of an average 4-year postretention mandibular dental arch stability after treatment with a lip bumper followed by full fixed appliances were intermolar and interpremolar width increases during lip bumper therapy. The amount of relapse in this crowding could be considered clinically irrelevant.     

Prospective clinical trial comparing the effects of conventional Twin-block and mini-block appliances: Part 1. Hard tissue changes.

PURPOSE: The aim of this prospective clinical trial was to compare the dentoskeletal effects of a conventional and a modified Twin-block (TB) appliance. The conventional TB appliance was constructed with a large, single-step advancement. The modified appliance, termed the mini-block (MB), was incrementally advanced, incorporated a maxillary incisor torquing spring, and had a reduced bite-block height. MATERIAL: Seventy patients were placed into age- and sex-matched pairs. Patients in each pair were allocated to opposing appliance groups. Active treatment lasted 9 months, irrespective of the final overjet attained, and final cephalometric records were taken at 12 months (+/-1 month). Both groups showed pretreatment equivalence for age, sex, overjet, and cephalometric variables. RESULTS: The TB group experienced a significantly greater reduction in overjet (median, -8 mm; P = .02) compared with the MB group (median, -4 mm). This improved overjet reduction was associated with significantly greater forward movement of pogonion (median change, TB: 3.3 mm; MB: 2.1 mm; P = .02) and greater retroclination of the maxillary incisors (median change, TB: -5 degrees ; MB: -1.9 degrees ; P = .04). No significant intergroup difference was found for changes in total anterior facial height (median change, TB: 4.4 mm; MB: 4.3 mm) and mandibular incisor proclination (median change, TB: 1.3 degrees ; MB, 2.4 degrees ). CONCLUSIONS: Progressive mandibular advancement was not associated with greater mandibular growth compared with single-step advancement. The maxillary incisor torquing spring seems to be effective at reducing maxillary incisor retroclination. Reduced bite activation in the MB group did not result in less mandibular incisor proclination. There was considerable individual variation in appliance effects within both groups.     

Prediction of maxillary third molar impaction in adolescent orthodontic patients

The purpose of this study was to identify risk factors for maxillary third molar impaction in adolescent orthodontic patients. Radiographs made before treatment (T1) and after treatment (T2) and at a minimum of 10 years postretention (T3) of 132 patients that allowed accurate diagnosis of impaction vs eruption of one or both maxillary third molars were evaluated. Although univariate logistic regression revealed that the decision to extract premolars reduced the risk of impaction by 76% (P < .01), this parameter was not included in the final prediction model at T1. Multiple logistic regression analyses revealed that third molar impaction could be predicted at T1 according to the size of the retromolar space and the amount of mesial molar movement that will occur during active appliance therapy, reducing the risk of impaction by 22% and 34% for every millimeter increase in distance, respectively (P < .01). At T2, multiple logistic regression revealed that the odds of impaction were more than 60 times higher (P < .01) if the third molar was angulated mesially as compared with less than 30 degrees distally relative to the occlusal plane and almost five times (P < .05) higher if the third molar was angulated more than 30 degrees distally as compared with less than 30 degrees distally. Similar analyses at T2 showed 29% reduced risk of impaction for every millimeter increase in retromolar space and 18% reduced risk for every degree increase in angle MP/SN (P < .01).