首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 93 毫秒
1.

Background

There is risk of junction failure when using modular femoral stems for revision total hip arthroplasty (THA), especially with loss of bone stock in the proximal femur. Using a cortical strut allograft may provide additional support of a modular femoral construct in revision THA.

Methods

We reviewed prospectively gathered clinical and radiographic data for 28 revision THAs performed from 2004 to 2014 using cementless modular femoral components with cortical strut allograft applied to supplement proximal femoral bone loss: 5 (18%) were fluted taper designs and 23 (82%) were porous cylindrical designs All the patients had a Paprosky grade IIIA or greater femoral defect. The mean follow-up was 5.4 ± 3.9 years.

Results

The Harris Hip Scores improved from 26 ± 10 points preoperatively to 71 ± 10 points at final follow-up (P < .001). The Western Ontario McMaster Universities Osteoarthritis Index scores improved from 45 ± 12 points preoperatively to 76 ± 12 points at final follow-up (P < .001). Eighty-nine percent (25 hips) of all revision or conversion THAs were in place at final follow-up. Three (11%) patients underwent reoperations, 2 for infection and 1 for periprosthetic fracture. There was no statistical significant change in femoral component alignment (P = .161) at final follow-up. Mean subsidence was 1.8 ± 1.3 mm at final follow-up. Femoral diameter increased from initial postoperative imaging to final follow-up imaging by a mean of 9.1 ± 5.1 mm (P < .001) and cortical width increased by a mean of 4.5 ± 2.2 mm (P < .001). Twenty-seven hips (96%) achieved union between the cortical strut allograft and the host femur.

Conclusion

The use of a modular femoral stem in a compromised femur with a supplementary cortical strut allgraft is safe and provides satisfactory clinical and radiological outcomes.  相似文献   

2.

Background

The purpose of this study was to determine: validated clinical and radiographic outcomes of periprosthetic femoral fractures around stable hip implants treated with plate fixation and additional cortical strut onlay allografts without revision of the stem; radiographic signs of fracture healing; allograft-to-host bone union; resorption of cortical strut allograft; and frequency of complications.

Methods

At our institute, 24 patients (25 hips) were identified with Vancouver type B1 fracture at the tip of the femoral stem and one patient (one hip) was identified with a Vancouver type C fracture of the femur. All these fractures were treated with combined use of locking plate fixation and cortical strut onlay allografts. There were 18 women and 7 men, with an average age of 63 years. Harris hip score and University of California, Los Angeles activity score were used to assess postoperative function. The average duration of follow-up was 3.7 years (range, 1-7 years).

Results

Harris hip score at final review was 86 points (range, 65-95 points). University of California, Los Angele activity score averaged 5.8 ± 1.3 point (range, 3.5-10 points) at final follow-up. All but 2 patients returned to their preoperative functional level within 1 year. Twenty-three of 26 hips had fracture union following the first operation. Three hips were failed to obtain fixation because of insufficient length of plate and allograft. Cortical strut onlay allografts were incorporated in the host femur in all hips by one year. Minor resorption of allograft was noticed, but there was no failure of any of the cortical strut allografts.

Conclusion

The cortical strut onlay allografts facilitated the mechanical stability and the biological fracture healing in addition to plate fixation.  相似文献   

3.

Background

Periprosthetic femur fractures after primary and revision total hip arthroplasty (THA) are one of the most common long-term reasons for reoperation after THA. Previous investigations have analyzed the incidence and risk factors of these fractures. No previous study, however, has analyzed a variation in periprosthetic femur fractures between meteorologic seasons. The aim of this study was to compare the incidence of periprosthetic femur fractures after primary and revision THAs depending on the meteorologic season.

Methods

We identified 8920 patients (10,672 hips) who underwent primary THAs and 1830 patients (1998 hips) who underwent revision THAs at our institution between 1995 and 2011. All patients resided in the Upper Midwest at the time of surgery. Patients who experienced periprosthetic femur fractures were identified and categorized based on the meteorologic season. A Cox model was used to assess the association of seasonality with the risk of fracture.

Results

During the study period, 165 primary THAs and 80 revision THAs sustained a periprosthetic femur fracture. Using winter as a reference, the risk of a periprosthetic femur fracture after primary THA was not statistically higher in the spring (hazard ratio [HR] = 1.3; P = .2), autumn (HR = 1.4; P = .2), and summer (HR = 1.415; P = .1). Similarly, the risk of periprosthetic femur fracture after revision THA was not statistically higher in the spring (HR = 0.9; P = .6), autumn (HR = 0.6; P = .1), and summer (HR = 0.9; P = 1.0).

Conclusion

The risk of periprosthetic femur fracture after primary and revision THA does not significantly differ between meteorologic seasons.  相似文献   

4.

Background

Revision total hip arthroplasty (THA) is challenging specially in the presence of severe acetabular bone deficiency. We report the use of a highly porous revision shell augmented by structural allograft to provide structural support and coverage to the acetabular component.

Methods

We identified 56 patients (58 hips) undergoing revision THA, where a trabecular metal revision cup was supported by structural allograft. Mean follow-up was 5.4 years (range 2-12 years). Preoperatively acetabular bone defects were classified as Paprosky 2A in 6 hips (10%), 2B in 12 hips (21%), 2C in 12 hips (21%), 3A in 11 hips (19%), and 3B in 17 hips (29%). Structural allograft configuration was classified as type 1 (flying buttress) in 13 hips, type 2 (dome support) in 23 hips, and type 3 (footings) in 17 hips, with 5 hips having combined configurations.

Results

All hips showed evidence of union between the allograft and host bone at latest follow-up, 14 hips had partial resorption of the allograft that did not affect cup stability. Three acetabular components demonstrated failure of ingrowth. Survivorship-free from radiographic acetabular loosening as end point was 94% at 5 years. The 5-year survivorship with revision for any reason as end point was 90%.

Conclusion

Trabecular metal shells combined with structural bone allograft in revision THA demonstrate excellent midterm survival, with 94% of acetabular components obtaining stable union onto host bone at 5 years. Allograft restored bone stock with minimal resorption, and when it occurred did not alter the survivorship of the acetabular component.  相似文献   

5.

Background

Although use of intramedullary hip screws (IMHS) for intertrochanteric (IT) hip fractures has become more common, limited data have suggested difficulties in conversion to hip arthroplasty. The present study investigates whether conversion of failed IT fracture fixation with an intramedullary vs extramedullary device leads to different rates or types of complications or decreased arthroplasty survivorship.

Methods

One hundred eleven patients were converted to hip arthroplasty after previous surgical treatment of an IT fracture from 2000 to 2010. Seventy hips had been treated with an extramedullary fixation device (EFD) and 41 with an IMHS.

Results

Length of hospital stay and operative times were similar (6 days and 206 minutes for EFD vs 6 days and 208 minutes for IMHS; P > .7). The presence of a Trendelenburg gait at last clinical follow-up was similar between groups (37% in EFD group and 38% in IMHS group). Five-year survivorship free of revision was 95% in the EFD group and 94% in the IMHS group (P = 1.0). The overall complication rate was similar (21% for EFD vs 27% for IMHS; P = .51) between groups. The most common complication was late periprosthetic fracture in the EFD patients (6% vs 0% in IMHS; P = .29) and intraoperative femoral fracture in the IMHS patients (12% vs 1% in EFD; P = .02).

Conclusion

The short-term survivorship of conversion hip arthroplasty after surgical treatment of an IT fracture is excellent regardless of original fracture fixation method. If early complications, particularly periprosthetic fractures, can be minimized, the likelihood of a successful outcome is high. The risk of intraoperative femoral fracture was greater during conversion from an IMHS compared to an EFD.  相似文献   

6.

Background

This study compares the outcome between THA with and without femoral shortening osteotomy for unilateral mild to moderate high hip dislocation in developmental dysplasia of the hip patients.

Methods

The data on 42 hips in 42 patients who had undergone THA for unilateral mild to moderate high hip dislocation were retrospectively reviewed after being prospectively collected. In 22 patients, hips were reduced by soft tissue release and direct leverage using an elevator, without the osteotomy. The remaining 20 patients were treated with a subtrochanteric transverse shortening osteotomy. The mean follow-up of patients was 5 years (standard deviation = 1.0) for the nonosteotomy group and 6.2 years (standard deviation = 1.6) for the osteotomy group.

Results

The Harris Hip Score significantly improved in both groups. In the nonosteotomy group, we observed a lower leg length discrepancy compared with the osteotomy group (0.4 cm and 2.2 cm, respectively). Four patients (18.2%) in the nonosteotomy group and 15 patients (75%) in the osteotomy group developed a limp (P < .0001). Three patients (13%) developed femoral nerve palsy in the nonosteotomy group, but they all recovered completely within 6 months after the surgery. Nineteen patients in the nonosteotomy group showed knee valgus deformity immediately after the surgery but only 4 cases in the osteotomy group.

Conclusion

Compared with THA with femoral shortening osteotomy, THA without the osteotomy was associated with a lower number of patients who developed a limp at the end of follow-up; however, the rehabilitation was slower and more difficult, and a larger number of patients showed reversible nerve palsy and knee valgus deformity.  相似文献   

7.

Background

The major concern with the use of tranexamic acid is that it may promote a hypercoagulable state and increase the risk of deep vein thrombosis (DVT) and pulmonary embolism (PE), particularly when chemical thromboprophylaxis is not used. The objective of this study was to ascertain whether tranexamic acid reduces blood loss and transfusion amounts and increases the prevalence of DVT and PE in the patients undergoing primary cementless total hip arthroplasty (THA) without the use of routine chemical thromboprophylaxis.

Methods

There were 480 patients (582 hips) in the control group who did not receive tranexamic acid and 487 patients (584 hips) in the study group who received tranexamic acid. Mechanical compression device was applied without any chemical thromboprophylaxis. Transfusion rates and volumes were recorded. DVT was diagnosed using both sonogram and venogram at 7 or 8 days postoperatively. All patients had pre- and postoperative perfusion lung scanning to defect pulmonary embolism (PE).

Results

Intraoperative (614 vs 389 mL) and postoperative blood loss (515 vs 329 mL) and transfusion volumes (3 units vs 1.5 units) were significantly lower (P < .001) in the tranexamic acid group. The prevalence of DVT was 15% (87 of 582 hips) in the control group and 18% (105 of 584 hips) in the tranexamic acid group. No fatal PE occurred in either group.

Conclusion

The use of tranexamic acid reduces the volume of blood transfusion and does not increase the prevalence of DVT or PE in the patients who did not receive routine chemical thromboprophylaxis after primary cementless THA.  相似文献   

8.

Background

Femoral component stability and resistance to subsidence is critical for osseointegration and clinical success in cementless total hip arthroplasty. The purpose of this study was to radiographically evaluate the anatomic fit and subsidence of 2 different proximally tapered, porous-coated modern cementless femoral component designs.

Methods

A retrospective cohort study of 126 consecutive cementless total hip arthroplasties was performed. Traditional fit-and-fill stems were implanted in the first 61 hips with the remaining 65 receiving morphometric tapered wedge stems. Preoperative bone morphology was radiographically assessed by the canal flare index. Canal fill in the coronal plane, subsidence, and the sagittal alignment of stems was measured digitally on immediate and 1-month postoperative radiographs.

Results

Demographics and canal flare indices were similar between groups. The percentage of femoral canal fill was greater in the tapered wedge compared to the fit-and-fill stem (P = .001). There was significantly less subsidence in the tapered wedge design (0.3 mm) compared to the fit-and-fill design (1.1 mm) (P = .001). Subsidence significantly increased as body mass index (BMI) increased in the fit-and-fill stems, a finding not observed in the tapered wedge design (P = .013).

Conclusion

An anatomically designed morphometric tapered wedge femoral stem demonstrated greater axial stability and decreased subsidence with increasing BMI than a traditional fit-and-fill stem. The resistance to subsidence, irrespective of BMI, is likely due to the inherent axial stability of a tapered wedge design and may be the optimal stem design for obese patients.  相似文献   

9.

Background

Studies that have previously examined the relationship between acetabular component inclination angle and polyethylene wear have shown increased wear of conventional polyethylene with high inclination angles. To date, there are no long-term in vivo studies examining the correlation between cup position and polyethylene wear with highly crosslinked polyethylene.

Methods

An institutional arthroplasty database was used to identify patients who had metal-on-highly crosslinked polyethylene primary total hip arthroplasty using the same component design with a minimum follow-up of 10 years. A modified radiostereometric analysis examination setup was utilized, recreating standard anteroposterior and cross-table lateral examinations in a single stereo radiostereometric analysis acquisition. The same radiographs were used to measure inclination angle and anteversion.

Results

A total of 43 hips were included for analysis in this study. Average follow-up was 12.3 ± 1.2 years. The average linear wear rate was calculated to be 0.066 ± 0.066 mm/y. Inclination angle was not correlated with polyethylene wear rate (P = .82). Anteversion was also not correlated with polyethylene wear rate (P = .11).

Conclusion

At long-term follow-up of >10 years, highly crosslinked polyethylene has a very low wear rate. This excellent tribology is independent of acetabular position. The low wear rate highlights the excellent results of metal on highly crosslinked polyethylene, and supports its use in total hip arthroplasty.  相似文献   

10.

Background

Studies regarding postoperative outcomes after primary total hip arthroplasty (THA) in patients who have comorbid factors tend to focus on medical diseases. However, there is a paucity of literature examining the effect of a patient's orthopedic surgical history on outcomes after THA. Significantly, there are currently no studies on the effect of spinal fusion surgery on THA outcomes.

Methods

A review of 82 consecutive patients who had prior spinal fusion surgery who underwent elective THA from January 1, 2006 to December 31, 2015, was conducted. A matching cohort of 82 patients was selected from the remaining THA patients to maintain a 1:1 ratio control group. This cohort of 82 patients was matched for age, gender, body mass index ±5, preoperative Oxford score ±10, total Short Form-36 score ±10, and total Western Ontario and McMaster Universities Arthritis Index (WOMAC) score ±50. Data on the same functional outcomes were prospectively collected at 6-month and 2-year follow-up for comparison.

Results

Patients without spinal fusion had better outcome scores than patients with prior spinal fusion, specifically in their 6-month WOMAC scores (253.33-225.07; P = .046), their 2-year Short Form-36 total scores (79.71-69.21; P = .041), and their 2-year WOMAC scores (213.5-267.41; P = .054).

Conclusion

This study demonstrates that patients with prior spinal fusion had worse outcomes after THA than patients without prior spinal fusion. This has clinical significance in counseling patients with previous spinal fusion undergoing THA.  相似文献   

11.

Background

A previous randomized clinical trial at our institution demonstrated slower recovery of 35 2-incision total hip arthroplasties (THAs) when compared with 36 mini-posterior THAs at 2 years. The primary aim of the present study was to report concise 10-year follow-up results.

Methods

We retrospectively reviewed the 71 patients in the previous randomized clinical trial, comparing clinical outcomes, revisions, reoperations, and implant survivorship between the 2-incision and the mini-posterior THAs.

Results

At the most recent follow-up, the mean Harris hip score was 85 in the 2-incision group and 87 in the mini-posterior group (P = .4). There were 4 revisions and 2 reoperations (16%) in the 2-incision group vs 1 revision and 3 reoperations (11%) in the mini-posterior group (P = .5). Ten-year survivorship free of aseptic revision or reoperation was 77% in the 2-incision group vs 90% in the mini-posterior group (P = .15).

Conclusion

There were no improvements in early or midterm clinical outcomes with the 2-incision technique. However, there was a clinical trend toward a higher rate of aseptic revisions in the 2-incision THA group.  相似文献   

12.

Background

Extensor mechanism disruption remains a devastating complication after total knee arthroplasty. The purpose of this study is to describe the outcomes of extensor mechanism allograft (EMA) reconstruction in a large single-center case series.

Methods

Consecutive patients with a previous total knee arthroplasty undergoing extensor mechanism reconstruction using a fresh-frozen EMA tensioned in full extension were identified retrospectively from single-center institutional database (N = 25 patients, 26 knees; mean follow-up 68 months [range 22-113 months]). The primary outcome was initial allograft failure, defined as removal of the allograft or extensor lag >30 degrees at most recent follow-up.

Results

Sixty-nine percent (18/26) of knees had retained their initial allograft reconstruction at their latest follow-up despite reoperation rates of 58% (15/26). A younger age was significantly associated with failure of the initial allograft reconstruction. Knee Society Scores increased from 101 (38 standard deviation [SD]) to 116 (40 SD) at most recent follow-up for the group as a whole (P = .4). Patients undergoing a reoperation for any cause had lower Knee Society Scores (101 [SD 38] vs 138 [SD 32], respectively; P = .04) at most recent follow-up.

Conclusion

EMA reconstruction shows adequate overall intermediate-term survival; however, reoperation rates were high and associated with worse functional outcomes.  相似文献   

13.

Background

The rate of and the reasons for the failure of metal-on-metal (MoM) bearings have recently been discussed in literature. The aim of this study was to evaluate the influence of acetabular cup inclination and version angles on revision risk in patients with MoM hip arthroplasty.

Methods

We retrospectively reviewed 825 patients (976 hips) who underwent a MoM hip arthroplasty between 2000 and 2013. There were 474 men and 351 women, with a mean age of 58 (19-86) years. Acceptable cup orientation was considered to be inside the Lewinnek's safe zone.

Results

The mean acetabular inclination angle was 48.9° (standard deviation, 8.1°; range, 16°-76°) and version angle 20.6° (standard deviation, 9.9°; range, ?25 to 46°). The cup was found to be outside the Lewinnek's safe zone in 571 hips (58.5%). Acetabular cup revision surgery was performed in 157 hips (16.1%). The cup angles were outside Lewinnek's safe zone in 69.2% of the revised hips. The mean interobserver reliability and intraobserver repeatability of the measurements of cup inclination and version angles were excellent (intraclass correlation coefficients >0.90). The odds ratio for revision in hips outside vs inside the Lewinnek's safe zone was 1.82 (95% confidence interval, 1.26-2.62; P = .0014).

Conclusion

Our findings provide compelling evidence that a cup position outside the Lewinnek's safe zone is associated with increased revision risk in patients with MoM arthroplasty.  相似文献   

14.

Background

The direct anterior approach (DAA) is becoming more popular as the standard surgical approach for primary total hip arthroplasty. However, femoral complications of up to 2.8% have been reported. Therefore, it is important for surgeons to understand the periarticular neurovascular anatomy in order to safely deal with intraoperative complications.

Methods

Anatomic dissections were performed on 20 cadaveric hips. The neurovascular structures anterior to the femur and distal to the intertrochanteric line were dissected and its position was described in relation to anatomic landmarks easily identified through the DAA: anterior superior iliac spine (ASIS), the insertion of the gluteus minimus (GM), and the lesser trochanter (LT).

Results

Two clearly distinguishable neurovascular bundles running to the vastus lateralis were seen in 17 of 20 specimens. The average distances to the landmarks were as follows: ASIS–1st bundle = 12.3 cm (range, 9.7-14.5); GM–1st bundle = 3.2 cm (range, 2.2-4); LT–1st bundle = 1.6 cm (range, 0.7-2.8); 1st bundle–2nd bundle = 3.3 cm (range, 1.8-6.1).

Conclusion

A consistent pattern of 2 clearly distinguishable neurovascular bundles was seen in 85% of the specimens. Knowledge of the position of these neurovascular bundles in relation to the anatomic landmarks makes distal femoral extension of the DAA feasible. Further clinical studies are needed to confirm the safety of the extensile anterior approach.  相似文献   

15.

Background

Hip arthroscopy is increasingly being used in joint preservation surgery with clear benefits in the treatment of prearthritic conditions. A number of patients, however, will still go on to require subsequent hip arthroplasty, and at present, little evidence exists determining the impact that prior hip arthroscopy may have on the outcomes of a subsequent arthroplasty.

Methods

Using prospectively collated data, we identified 35 patients who had a hip arthroplasty (22 total hip arthroplasties and 13 hip resurfacing arthroplasties) after prior ipsilateral hip arthroscopy (cases). Cases were matched for age, gender, and prosthesis type with 70 controls (patients who received a primary arthroplasty over the same period, without prior arthroscopy). Outcome measures included range of movement, implant survival, complications, and functional outcome (Oxford Hip Score and Harris Hip Score).

Results

There was no demonstrable difference in improved range of motion after hip arthroplasty between the 2 groups, across any axis of movement (flexion, extension, internal/external rotation, abduction, and adduction; P = .07-.78). There was no significant difference in complication rate (P = .72). Overall 7-year implant survival was 85.9% (95% confidence interval [CI], 75-95.8). There was no difference in survival between cases (87.6%; 95% CI, 73.5-100) and controls (86.3%; 95% CI, 74.6%-98.0%; P = .2). Ten of the 11 revision arthroplasties performed were due to adverse reactions to metal debris in metal-on-metal hip resurfacing arthroplasty cases (P = .01). There was no difference in improvement of functional outcome postarthroplasty between groups (P = .48-.76).

Conclusion

This study demonstrates that hip arthroscopy does not adversely influence outcome of a subsequent hip arthroplasty.  相似文献   

16.

Background

We previously described the results of a randomized controlled trial of mini-posterior vs 2-incision total hip arthroplasty and were unable to demonstrate significant differences in early outcomes. As less-invasive anterior approaches remain popular, the purpose of this report was to re-examine the outcomes at a minimum 5-year follow-up.

Methods

Seventy-two patients undergoing primary total hip arthroplasty were randomized to a mini-posterior or 2-incision approach. Complications, revisions, and clinical outcome measures were compared. Radiographs were reviewed for implant loosening. A power analysis using a minimal clinically important difference value of 6 points for the Harris hip score revealed 28 patients required per group.

Results

At a mean of 8.2 years (range, 5-10 years), 6 patients died without revision surgery and 63 of 66 living patients were reviewed. There were 6 total failures, 3 in each group. For unrevised patients, there were no significant differences between groups (posterior vs 2-incision) in the Harris hip score (95.5 ± 3.5 vs 95.7 ± 6.3; P = .88), 12-item Short Form Survey physical composite score (50.5 ± 8.5 vs 49.0 ± 9.1; P = .53), 12-item Short Form Survey mental composite score (57.3 ± 4.1 vs 55.4 ± 8.0; P = .25), or single assessment numeric evaluation score (97.1 ± 3.7 vs 97.8 ± 5.2; P = .55).

Conclusion

We found no differences in midterm outcomes between the 2 approaches. Given the increased complexity, operative time, and need for fluoroscopy with the 2-incision approach combined with equivalent early and midterm outcomes, the 2-incision approach has been abandoned in the senior author's practice.  相似文献   

17.

Background

Polyethylene acetabular components are common in hip arthroplasty. Highly cross-linked polyethylene (HXLPE) has lower wear than ultra-high molecular weight polyethylene (UHMWPE). Evidence suggests that wear particles induce inflammation causing periprosthetic osteolysis contributing to implant loosening with wear rates of 0.05 mm/y were considered safe. We aimed to compare incidence and volume of periacetabular osteolysis between HXLPE and UHMWPE using computed tomography.

Methods

Initially, 54 hips in 53 patients were randomized to HXLPE or UHMWPE acetabular liner. At 10 years, 39 hips in 38 patients remained for the radiostereometric analysis' demonstrating significantly lower wear in the HXLPE group. At 12 years, 14 hips in 13 patients were lost to follow-up leaving 25 hips for computed tomography assessment. Images were reconstructed to detect osteolysis and where identified, areas were segmented and volumized.

Results

Osteolysis was observed in 8 patients, 7 from the UHMWPE group and only 1 from the HXLPE group (Fisher exact, P = .042). There was no correlation between the amount of polyethylene wear and osteolysis volume; however, the radiostereometric analysis-measured wear rate in patients with osteolysis from both groups was significantly higher than overall average wear rate.

Conclusion

This data demonstrates lower incidence of periacetabular osteolysis in the HXLPE group of a small cohort. Although numbers are too low to estimate causation, in the context of lower wear in the HXLPE group, this finding supports the hypothesis that HXLPE may not elevate osteolysis risk, and hence does not suggest that HXLPE wear particles are more biologically active than those generated by earlier generations of polyethylene.  相似文献   

18.

Background

The optimal surgical treatment for osteonecrosis of the femoral head has yet to be elucidated. To evaluate the role of femoral fixation techniques in hip resurfacing, we present a comparison of the results for 2 consecutive groups: group 1 (75 hips) received hybrid hip resurfacing implants with a cemented femoral component; group 2 (103 hips) received uncemented femoral components. Both groups received uncemented acetabular components.

Methods

We retrospectively analyzed our clinical database to compare failures, reoperations, complications, clinical results, metal ion test results, and X-ray measurements. Using consecutive groups caused time interval bias, so we required all group 2 patients to be at least 2 years out from surgery; we compared results from 2 years and final follow-up.

Results

Patient groups matched similarly in age, body mass index, and percent female. Despite similar demographics, the uncemented, group 2 cases showed a lower raw failure rate (0% vs 16%; P < .0001), a lower 2-year failure rate (0% vs 7%; P = .04), and a superior 8-year implant survivorship (100% vs 91%; log-rank P = .0028; Wilcoxon P = .0026). In cases that did not fail, patient clinical (P = .05), activity (P = .02), and pain scores (P = .03), as well as acetabular component position (P < .0001), all improved in group 2, suggesting advancements in surgical management. There were no cases of adverse wear-related failure in either group.

Conclusion

This study demonstrates a superior outcome for cases of osteonecrosis with uncemented hip resurfacings compared to cases employing hybrid devices.  相似文献   

19.

Background

Recommendations for minimum cup coverage based on anteroposterior radiographs are widely used as an intraoperative guide in total hip arthroplasty for patients with developmental dysplasia of the hip. The purpose of this study was to examine the validity of two-dimensional (2D) measurement of coverage with three-dimensional (3D) coverage and to identify parameters for determining the 3D coverage during surgery.

Methods

We developed a technique to accurately reproduce the intraoperative anatomic geometry of the dysplastic acetabulum and measure the 3D cup coverage postoperatively. With this technique, we retrospectively analyzed the difference and correlation between 2D and 3D measurements of native bone coverage in 35 patients (45 hips) with Crowe II or III DDH. Linear regression analysis was performed to examine the intraoperative parameters related to coverage. The mean follow-up period was 7.64 years (range, 6.1-9.5 years).

Results

There was a significant difference and a fair correlation between 2D and 3D measurements. The 2D measurement underestimated the 3D cup coverage by approximately 13%. An excellent linear relationship was noted between the 3D coverage/uncoverage and the height of the uncovered portion (R2 = 0.8440, P < .0001). There was no case of loosening or revision during the follow-up.

Conclusion

Current minimum cup coverage recommendations based on 2D radiograph measurements should not be used as a direct intraoperative guide. The height of the uncovered portion is a useful parameter to determine the 3D coverage during surgery.  相似文献   

20.

Background

To investigate changes in lower extremity coronal alignment in patients with unilateral Crowe type IV developmental dysplasia of the hip who underwent total hip arthroplasty with transverse femoral shortening osteotomy.

Methods

We reviewed the preoperative and 1-year postoperative full-length lower extremity radiographs of 25 patients. Femoral offset (FO), mechanical hip-knee-ankle angle, anatomical axis, mechanical axis deviation (MAD), mechanical lateral proximal femoral angle, anatomical medial proximal femoral angle, mechanical lateral distal femoral angle, anatomical lateral distal femoral angle, knee joint line congruency angle, mechanical medial proximal tibial angle, mechanical lateral distal tibial angle, ankle joint line orientation angle, tibial plafond talus angle, extremity length, and pelvic obliquity were measured on both the operative and nonoperative sides.

Results

Postoperatively, there were significant changes in FO (P = .001), hip-knee-ankle angle (P = .004), MAD (P = .016), mechanical lateral proximal femoral angle (P = .001), anatomical medial proximal femoral angle (P = .012), mechanical lateral distal femoral angle (P = .043), and ankle joint line orientation angle (P = .012) on the operative side. Only MAD (P = .035) changed significantly on the nonoperative side.

Conclusion

Modification of FO and reconstruction of hip joint anatomy led to neutralization of knee and ankle valgus alignment. Effects on the nonoperative side were minimal.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号