共查询到20条相似文献,搜索用时 15 毫秒
1.
Kyung-Soon Park Jong-Keun Seon Keun-Bae Lee Sung-Kyu Kim Chee-Ken Chan Taek-Rim Yoon 《The Journal of arthroplasty》2017,32(2):503-509
Background
This study aims at determining the average long-term result of revision total hip arthroplasty (THA) using the acetabular reinforcement ring with a hook (ARRH) and bone grafting in severe acetabular bony defect. Expected 15-year survival of ARRH in revision THA is included in the study.Methods
Retrospective review of 48 patients (48 hips) with follow-up duration of average 11.4 years (range, 6.1-21.4 years) was conducted. At each follow-up, Harris hip score was used to assess functional outcome, and radiographic acetabular component osteolysis was measured by DeLee and Charnley classification. Bone defects were assessed preoperatively and intraoperatively using American academy of orthopedic surgeons and Paprosky classification. The common modes of ARRH failures were evaluated. Bone consolidation, presence of heterotopic ossification, and complications such as infection and dislocation were recorded.Results
The bone defects were varied and included cavitary, segmental, and combined defects without any pelvic discontinuity. Mean Harris hip score improved from 52.6 points preoperatively to 82.0 points postoperatively. Nine acetabular revisions and 3 stem revisions (2 concurrent with acetabular revisions and 1 isolated stem revision) were performed. There were 5 infected cases and 1 patient with recurrent dislocation. The 11.4-year survival of revision THA with ARRH was 71% as the end point for acetabular revision surgery for any reason. The expected 15-year survival of revision THA with ARRH was 60%. The most common failure mode of ARRH was superomedial migration followed by lateral migration.Conclusion
ARRH combined with bone grafting produces relatively good average long-term clinical results. 相似文献2.
Ashok S. Gavaskar Hitesh Gopalan Bhupesh Karthik Parthasarathy Srinivasan Naveen C. Tummala 《The Journal of arthroplasty》2017,32(3):872-876
Background
Total hip arthroplasty (THA) provides a successful salvage option for failed acetabular fractures. The complexity of arthroplasty for a failed acetabular fracture will depend on the fracture pattern and the initial management of the fracture. Our objective was to compare the midterm outcome of THA between patients who presented with failed acetabular fractures following initial surgical or nonsurgical treatment.Methods
Forty-seven patients underwent cementless THA ± acetabular reconstruction following failed treatment of acetabular fractures. Twenty-seven were initially treated by surgery (group A) and 20 had nonsurgical treatment (group B). Intraoperative measures, preoperative and follow-up clinical, radiological, and functional outcomes were compared between the 2 groups.Results
The mean surgical time, blood loss, and need for blood transfusion were significantly less in group A (P < .05). Acetabular reconstruction to address cavitary or segmental defects was needed in a significantly higher number of patients in group B (P = .006). Significant improvement in modified Merle d'Aubigne and Oxford scores was seen postsurgery in both groups. Acetabular component survival with aseptic loosening as end point was 98%. Overall survival rate with infection, revision, or loosening as end point was 93% at a mean follow-up of 7 years ± 17 months.Conclusion
THA for a failed acetabular fracture is greatly facilitated by initial surgical treatment. Although functional results and survivorship were similar in both groups, failed nonsurgical treatment in complex fractures is associated with migrated femoral head and extensive acetabular defects requiring complex acetabular reconstruction. 相似文献3.
Hernan A. Prieto Michael E. Kralovec Daniel J. Berry Robert T. Trousdale Rafael J. Sierra Miguel E. Cabanela 《The Journal of arthroplasty》2017,32(11):3488-3494
Background
Revision total hip arthroplasty (THA) is challenging specially in the presence of severe acetabular bone deficiency. We report the use of a highly porous revision shell augmented by structural allograft to provide structural support and coverage to the acetabular component.Methods
We identified 56 patients (58 hips) undergoing revision THA, where a trabecular metal revision cup was supported by structural allograft. Mean follow-up was 5.4 years (range 2-12 years). Preoperatively acetabular bone defects were classified as Paprosky 2A in 6 hips (10%), 2B in 12 hips (21%), 2C in 12 hips (21%), 3A in 11 hips (19%), and 3B in 17 hips (29%). Structural allograft configuration was classified as type 1 (flying buttress) in 13 hips, type 2 (dome support) in 23 hips, and type 3 (footings) in 17 hips, with 5 hips having combined configurations.Results
All hips showed evidence of union between the allograft and host bone at latest follow-up, 14 hips had partial resorption of the allograft that did not affect cup stability. Three acetabular components demonstrated failure of ingrowth. Survivorship-free from radiographic acetabular loosening as end point was 94% at 5 years. The 5-year survivorship with revision for any reason as end point was 90%.Conclusion
Trabecular metal shells combined with structural bone allograft in revision THA demonstrate excellent midterm survival, with 94% of acetabular components obtaining stable union onto host bone at 5 years. Allograft restored bone stock with minimal resorption, and when it occurred did not alter the survivorship of the acetabular component. 相似文献4.
Scott M. Eskildsen Zenus J. Wilson David C. McNabb Christopher W. Olcott Daniel J. Del Gaizo 《The Journal of arthroplasty》2017,32(11):3474-3479
Background
In the setting of acetabular deficiency during total hip arthroplasty (THA), the medial protrusio technique (MPT) allows for increased component coverage while avoiding excessive component abduction or elevation of the hip center. The technique involves controlled reaming through the medial acetabular wall while maintaining the continuity of the anterior and posterior columns. The purpose of this study is to analyze the results of the largest reported series to date of primary and revision THAs using the MPT.Methods
A retrospective review of THAs performed by a single surgeon from July 2004 to July 2010 identified 102 patients who underwent THA necessitating the use of the MPT (primary 86 and revision 16), with at least 2 years follow-up.Results
This study reports the largest series to date of primary and revision THAs using the MPT for acetabular deficiency. Postoperatively, mean Harris hip score was 86 (range 31-96). There was no correlation with degree of medialization and change in Harris hip score (P = .12). At mean follow-up of 41.1 months (range 24-92 months), there were no intrapelvic structure injuries and no acetabular components required revision. The MPT provided a safe and effective method for addressing acetabular deficiency and avoiding component malposition.Conclusion
The MPT provided a safe and effective method for addressing acetabular deficiency in this large series of patients. The technique was successful at improving component coverage while maintaining an anatomic hip center and avoiding excessive component abduction. Fixation remained durable with no cases of loosening at final follow-up. 相似文献5.
Kenichi Oe Hirokazu Iida Kohei Tsuda Tomohisa Nakamura Naofumi Okamoto Yusuke Ueda 《The Journal of arthroplasty》2017,32(3):908-914
Background
The purpose of this study was to identify the long-term durability of the Kerboull-type reinforcement device (KT plate) in acetabular reconstruction for massive bone defects, assessing the remodeling of structural bone grafts.Methods
This study retrospectively evaluated 106 hips that underwent acetabular reconstruction using a KT plate between November 2000 and December 2010. Thirty-eight primary total hip arthoplasties (THAs) and 68 revised THAs were performed, and the mean duration of clinical follow-up was 8 years (5-14 years). Regarding reconstructing the acetabular bone defects, autografts were used in 37 hips, allografts in 68 hips, and A-W glass ceramics in 2 hips.Results
One hip exhibited radiological migration and no revision for aseptic loosening. The mean Merle d'Aubigné Clinical Score improved from 7.5 points (4-12 points) preoperatively to 10.9 points (9-18 points) at the last follow-up. The Kaplan–Meier survival rate for radiological migration of primary and revised THAs at 10 years was 100% and 97% (95% confidence interval: 96%-100%), respectively. Bone remodeling was evaluated using the radiological demarcation at the bone-to-bone interface, and an improvement of 100% in primary THAs and 94% in revised THAs was observed.Conclusion
For massive bone defects, acetabular reconstruction using the KT plate with a structural bone grafting can yield successful results. 相似文献6.
Anita Sadhu Denis Nam Benjamin R. Coobs Toby N. Barrack Ryan M. Nunley Robert L. Barrack 《The Journal of arthroplasty》2017,32(3):987-991
Background
Recently, the importance of acetabular component positioning in the Lewinnek “safe zone” in preventing prosthetic dislocation following total hip arthroplasty (THA) has been questioned. The purpose of this study was to determine the proportion of acetabular components within the Lewinnek safe zone between primary and revision THAs that have sustained a dislocation vs matched controls without a dislocation event.Methods
This was a retrospective, institutional review board–approved investigation of THAs performed at our institution or referred to our institution between 1997 and 2013. Ninety-six primary THAs and 60 revision THAs that sustained a dislocation were included and matched 1:1 based on age, gender, and body mass index with nondislocated controls. Acetabular component inclination and anteversion were performed using Martell Hip Analysis Suite and compared between the 2 cohorts for both primary and revision THAs.Results
The proportion of acetabular components within the safe zone for both inclination and anteversion was 23 of 96 (24%) in primary THA dislocators vs 48 of 96 (50%, P < .001) in controls. The proportion of acetabular components within the safe zone for both inclination and anteversion was 28 of 60 (47%) in revision THA dislocators vs 40 of 60 (66%, P = .03) in controls.Conclusion
Patients sustaining a dislocation following a primary or revision THA had acetabular components less frequently positioned within the safe zone compared to control patients. This study suggests acetabular component positioning remains an important variable in decreasing the risk of dislocation following primary and revision THA. 相似文献7.
Shinya Hayashi Shingo Hashimoto Koji Takayama Tomoyuki Matsumoto Kotaro Nishida Ryosuke Kuroda 《The Journal of arthroplasty》2017,32(5):1606-1611
Background
We identified preoperative predictors and size of acetabular bone defects for poor return to daily activity after revision total hip arthroplasty.Methods
Our analysis was based on outcomes of 140 cases of revision total hip arthroplasty, performed for any reason between May 2001 and March 2013. The Japanese Orthopaedic Association (JOA) score and body mass index (BMI) measured preoperatively, and the University of California Los Angeles (UCLA) activity score and JOA score measured at the 2-year follow-up were evaluated. Acetabular bone defects were classified according to the American Academy of Orthopaedic Surgeons grading system, with further classification of the location and severity of each acetabular bone defect. We compared preoperative clinical factors and postoperative clinical outcomes statistically.Results
We found a significant association between the number of revision surgeries and worse postoperative JOA scores and UCLA activity scores. There were significant differences in postoperative JOA scores and UCLA activity scores between patients with partial and global acetabular bone defects.Conclusion
Multiple revision surgeries and the size of the acetabular bone defect were predictors of both poorer clinical outcome and greater restriction in postoperative daily activities. Closer attention to the postoperative management of patients with a lower preoperative status is warranted. 相似文献8.
Bradford S. Waddell Friedrich Boettner Alejandro Gonzalez Della Valle 《The Journal of arthroplasty》2017,32(3):919-923
Background
We present the early institutional experience with the use of impaction bone grafting, mesh augmentation, and cement fixation of an all-polyethylene cup for the treatment of Paprosky 3B acetabular defects during revision total hip arthroplasty.Methods
Between 2005 and 2014, 21 patients (9 men, 12 women) with Paprosky 3B acetabular defects who underwent revision total hip arthroplasty using this technique were reviewed clinically and radiographically. Average age and body mass index were 72.4 (range, 48-91) years and 24.5 (range, 18.9-31) kg/m2, respectively. All patients underwent revision for aseptic loosening. Surgical technique included the use of a peripheral mesh to contain the defect, followed by impaction of morselized fresh-frozen bone graft and cement fixation of a polyethylene cup.Results
Complications occurred in 6 patients (29%) including limp (2), sciatic nerve palsy that resolved (1), limb length discrepancy (1), and greater trochanteric fracture (1). After an average follow-up of 47 months (range, 13-128 months), the average Hospital for Special Surgery hip score was 35.5 (range, 20-40). Radiographic assessment revealed cephalad cup migration of 2.29 mm (range, 0-20 mm) and medial migration of 1.57 mm (range, 0-6 mm). One patient has radiographic loosening and no symptoms 120 months postoperatively. No patient returned to the operating room for a related reason or is scheduled to undergo acetabular re-revision surgery.Conclusion
Impaction bone grafting is a reliable technique for the treatment of Paprosky 3B acetabular defects. It restores bone stock like no other available for addressing these defects. Longer follow-up is required to assess potential deterioration of fixation. 相似文献9.
Peter L. Lewis Stephen E. Graves Richard N. de Steiger Alana R. Cuthbert 《The Journal of arthroplasty》2017,32(10):3102-3107
Background
Constrained acetabular components have a mechanism to lock in the femoral head. They have been developed to control postoperative dislocation, particularly in revision total hip arthroplasty (THA). Although these components may reduce dislocation, there are durability concerns: with reports of locking mechanism failures and loosening. We wanted to determine the outcome of constrained components in controlling dislocation, and if these components had a higher rate of second revision when compared with standard nonconstrained components.Methods
Revision THA procedures from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) with a recorded primary procedure and initial diagnosis of osteoarthritis were used to compare constrained and standard nonconstrained components. Kaplan-Meier estimates of survivorship were calculated, and hazard ratios using Cox proportional hazard models were used to compare groups.Results
There were 9509 THA first-revision procedures and 700 constrained components. Constrained components had a significantly higher revision rate after 3 months when large-head metal-on-metal components were included (hazard ratio = 1.37; P = .005). When large-head metal-on-metal components were excluded, there was no difference in the rate of second revision between the 2 groups. When the analysis was limited to first revision for dislocation, constrained components had a higher second revision rate for further dislocation after 9 months.Conclusion
Constrained acetabular components had similar second-revision rates when compared with standard nonconstrained components, both for all first-revision reasons and when used to treat dislocation. Although possibly used for the more difficult unstable hips, constrained components had a higher rate of second revision for further dislocation. 相似文献10.
Edward M. DelSole Jonathan M. Vigdorchik Ran Schwarzkopf Thomas J. Errico Aaron J. Buckland 《The Journal of arthroplasty》2017,32(6):1910-1917
Background
Changes in spinal alignment and pelvic tilt alter acetabular orientation in predictable ways, which may have implications on stability of total hip arthroplasty (THA). Patients with sagittal spinal deformity represent a subset of patients who may be at particularly high risk of THA instability because of postural compensation for abnormal spinal alignment.Methods
Using standing stereoradiography, we evaluated the spinopelvic parameters, acetabular cup anteversion, and inclination of 139 THAs in 107 patients with sagittal spinal deformity. Standing images were compared with supine pelvic radiographs to evaluate dynamic changes in acetabular cup position. Dislocation and revision rates were procured through retrospective chart review. The spinal parameters and acetabular cup positions among dislocators were compared with those who did not dislocate.Results
The rate of THA dislocation in this cohort was 8.0%, with a revision rate of 5.8% for instability. Patients who sustained dislocations had significantly higher spinopelvic tilt, T1-pelvic angle, and mismatch of lumbar lordosis and pelvic incidence. Among all patients, 78% had safe anteversion while supine, which decreased significantly to 58% when standing due to increases in spinopelvic tilt. Among dislocating THA, 80% had safe anteversion, 80% had safe inclination, and 60% had both parameters within the safe zone.Conclusion
In this cohort, patients with THA and concomitant spinal deformity have a particularly high rate of THA instability despite having an acetabular cup position traditionally thought of as within acceptable alignment. This dislocation risk may be driven by the degree of spinal deformity and by spinopelvic compensation. Surgeons should anticipate potential instability after hip arthroplasty and adjust their surgical plan accordingly. 相似文献11.
Duan Wang Ling-Li Li Hao-Yang Wang Fu-Xing Pei Zong-Ke Zhou 《The Journal of arthroplasty》2017,32(4):1211-1219
Background
When surgeons reconstruct hips with a high dislocation related to severe developmental dysplasia of the hip (DDH) in total hip arthroplasty (THA), archiving long-term stable implant fixation and improving patient function and satisfaction remain challenging. The purpose of this study was to evaluate the 10-year outcomes of transverse subtrochanteric shortening osteotomy in cementless, modular THA in Crowe type IV-Hartofilakidis type III DDH.Methods
We reviewed 62 patients (76 hips) who underwent cementless THA with transverse subtrochanteric shortening osteotomy from 2002-2010. There were 49 women and 13 men with a mean age of 38.8 years, all of whom had Crowe type IV DDH. Mean follow-up period was 10 years. The acetabular cup was implanted in placement of the anatomical hip center in all hips.Results
The mean Harris Hip Score significantly improved from 38.8 points to 86.1 points. Similarly, modified Merle d'Aubigne and Postel Hip Score, Hip dysfunction and Osteoarthritis Outcome Score, and SF-12 also significantly improved. The mean limb length discrepancy was reduced from 4.3 cm to 1.0 cm. At mean follow-up of 10 years, there were 3 cases of postoperative dislocation, 2 cases of transient nerve palsy, 1 case of nonunion, and 4 cases of intraoperative fracture. Revision surgery was performed in 2 patients due to isolated loosening of acetabular component and femoral stem, respectively.Conclusion
Our data demonstrated that the cementless, modular THA combined with transverse subtrochanteric shortening osteotomy was an effective and reliable technique with high rates of successful fixation of the implants and satisfactory clinical outcomes. 相似文献12.
Rapeepat Narkbunnam Derek F. Amanatullah Ali J. Electricwala James I. Huddleston William J. Maloney Stuart B. Goodman 《The Journal of arthroplasty》2017,32(9):2799-2805
Background
Loosening and periprosthetic osteolysis are some of the most common long-term complications after hip arthroplasty. The decision-making process and surgical treatment options are controversial.Methods
We retrospectively reviewed 96 acetabular revisions (91 patients) performed between 2002 and 2012, with a minimum of 2 years of follow-up and a mean of 5.7 years of follow-up. Clinical outcome was assessed using the Harris Hip Score. The size and location of osteolytic lesions were evaluated using the preoperative radiographs; healing of the defects was categorized using a standardized protocol.Results
Thirty-three (34.4%) hips had isolated liner exchanges (ILEs), 10 (10.4%) hips had cemented liners into well-fixed shells (CLS), 45 (46.9%) hips had full acetabular revisions (FARs), and 8 (8.3%) hips had revision with a roof ring/antiprotrusio cage (RWC). All procedures showed significant improvement in Harris Hip Score after revision (P ≤ .001). Fifteen patients had moderate residual pain (pain score ≤20): 8 (24%) ILE, 3 (30%) CLS, and 4 (9%) FAR. Complete bone defect healing after grafting was lower with acetabular component retention procedures (ILE and CLS; 27%) compared with full acetabular component revision procedures (FAR and RWC; 57%). Fifteen patients underwent reoperation: 3 ILE, 1 CLS, 8 FAR, and 3 RWC.Conclusion
Acetabular component retention demonstrates a low risk of reoperation; however, residual pain and limited potential for bone graft incorporation are a concern. FAR is technically challenging and may have an elevated risk of reoperation; however, higher degrees of bone graft incorporation and satisfactory clinical outcome can be expected. 相似文献13.
Kensuke Yoshino Tadashi Tsukeoka Yoshikazu Tsuneizumi Tae Hyun Lee Junichi Nakamura Masahiko Suzuki Seiji Ohtori 《The Journal of arthroplasty》2017,32(11):3495-3501
Background
Bone deficiency in revision total hip arthroplasty is a surgical challenge. The Murata-Chiba cup supporter (MC support ring) is an acetabular component supporter for a cementless porous-coated cup. The purpose of this study is to examine the clinical and radiographic outcomes of reconstruction of acetabular bone deficiency using iliac autografts supported by an MC support ring in a revision setting with minimum 15-year follow-up.Methods
Fifty-nine consecutive revision total hip arthroplasties (57 patients) using the MC support ring were followed for a minimum of 15 years. Nine hips had American Academy of Orthopaedic Surgeons type II deficiency and 24 had type III defects of the acetabulum. Clinical outcomes were evaluated using the Harris hip score. Radiographic evaluation included assessment for loosening and bone graft incorporation. Kaplan-Meier survival analysis was performed.Results
At a minimum 15-year follow-up (mean, 17.6 years), 32 patients (33 hips) were alive, 17 patients (18 hips) were deceased, and 8 patients (8 hips) were lost to follow-up. The mean Harris hip score improved from 44.3 to 77.2 at final follow-up. Four hips required reoperation due to deep infection (2 hips) and liner dissociation (2 hips), but no acetabular components were revised for aseptic loosening. Incorporation of the bone graft occurred in all cases. One unrevised patient had radiographic failure. Survivorship at 15 years with re-revision or radiographic failure as the end point was 90.6% (95% confidence interval, 83.0%-98.8%).Conclusion
The reconstruction of acetabular bone deficiency using autografts supported by an MC support ring provided satisfactory clinical and radiological results at 17.6 years postoperatively. 相似文献14.
George A. Macheras Panagiotis Lepetsos Andreas O. Leonidou Panagiotis P. Anastasopoulos Spyridon P. Galanakos Lazaros A. Poultsides 《The Journal of arthroplasty》2017,32(12):3680-3684
Background
The use of porous tantalum for the acetabular component in primary total hip arthroplasty (THA) has demonstrated excellent short-term and midterm results. However, long-term data are scarce. The purpose of this prospective study is to report the long-term clinical and radiologic outcome following use of an uncemented porous tantalum acetabular component in primary THA with a minimum follow-up of 17.5 years, in a previously studied cohort of patients.Methods
We prospectively followed 128 consecutive primary THAs in 140 patients, between November 1997 and June 1999. A press-fit porous tantalum monoblock acetabular component was used in all cases. All patients were followed clinically and radiographically for a mean of 18.1 years (range, 17.5-19 years).Results
Mean age of patients at the time of operation was 60.4 years. Harris hip score, Oxford hip score, and range of motion were dramatically improved in all cases (P < .001). At last follow-up, all cups were radiographically stable with no evidence of migration, gross polyethylene wear, progressive radiolucencies, osteolytic lesions, or acetabular fractures. The survivorship with reoperation for any reason as end point was 92.8% and the survivorship for aseptic loosening as an end point was 100%.Conclusion
The porous tantalum monoblock cup in primary THA demonstrated excellent clinical and radiographic outcomes with no failures because of aseptic loosening at a mean follow-up of 18.1 years. 相似文献15.
Ahmed Nageeb Mahmoud Martin Sundberg Gunnar Flivik 《The Journal of arthroplasty》2017,32(5):1612-1617
Background
Porous metal augments have been used successfully for management of large acetabular defects during revision hip arthroplasty. The purpose of this study was to retrospectively review and compare the clinical and radiographic outcomes of porous metal augments in cemented and uncemented acetabular revisions, all performed at the same institution.Methods
Using our institutional clinical databases, the clinical and radiological outcomes of 104 cemented and 43 uncemented acetabular revisions with metal augments, performed between 2006 and 2015, were studied and compared. Acetabular augments were used when preoperative and intraoperative findings indicated the presence of large acetabular defects that can hinder the stability of the revision implants.Results
At a mean follow-up of 60.1 months (range 12.7-112.1), a total of 5 cups (3.4%), being 3 cemented (2.8%) and 2 uncemented (4.6%), had shown signs of aseptic loosening with cup and augment migration and 4 of these have been re-revised (2.7%). At final follow-up, the European Quality of Life-5 Dimensions for generic health, and the Hip disability and Osteoarthritis Outcome Score (HOOS) parameters had improved substantially without any significant difference between fixation techniques.Conclusion
Porous metal augments show comparable excellent radiographic and clinical mid-term outcomes when combined with cemented or uncemented cups in revision hip arthroplasty. 相似文献16.
Jared S. Bookman Ian D. Kaye Kevin K. Chen Fredrick F. Jaffe Ran Schwarzkopf 《The Journal of arthroplasty》2017,32(8):2587-2589
Background
Short-term and intermediate-term wear rates for highly cross-linked polyethylene (HCLPE) liners in total hip arthroplasty (THA) are significantly lower than published rates for traditional polyethylene liners. The aim of this study was to report the longest-to-date follow-up of a specific HCLPE liner.Methods
A series of 35 THAs using a specific HCLPE liner were reviewed. Anteroposterior radiographs were reviewed for femoral head penetration, the presence of femoral and/or acetabular osteolysis, long-term survival, total wear, and wear rates in all patients.Results
The average patient age at time of surgery was 70 years with an average follow-up of 10 years (118 months; range, 7.2-13.4 years). The mean wear rate in our cohort was 0.07 mm/y. Total wear was 0.71 mm over the study period. No hips showed evidence of osteolysis in any zones. Survivorship at latest follow-up was 100% with all-cause revision as an end point.Conclusion
The wear rate of HCLPE liners continues to be lower than published wear rates for traditional polyethylene and continues to reaffirm the acceptably low wear rates using HCLPE acetabular liner in primary THA. 相似文献17.
Ronald E. Delanois Chukwuweike U. Gwam Nequesha Mohamed Anton Khlopas Morad Chughtai Arthur L. Malkani Michael A. Mont 《The Journal of arthroplasty》2017,32(9):2806-2809
Background
We are reporting on the minimum 5-year outcomes of patients who underwent revision total hip arthroplasty (THA) using a specific highly-porous titanium shell. We assessed (1) aseptic and all-cause survivorship; (2) functional outcomes; (3) complications; and (4) radiographic outcomes.Methods
Two hospital databases were evaluated for patients who underwent revision THA due to component instability or aseptic loosening using a cementless highly-porous titanium shell between September 2006 and December 2011. This yielded 35 patients who had a mean age of 61 years (range 14-88 years). Patients had a mean follow-up of 6 years (minimum 5 years). All-cause and aseptic survivorship of the shell was calculated. Functional outcomes were assessed using the Harris Hip Score. We determined the incidence of postoperative complications and performed radiographic evaluation of pelvic radiographs from regular office visits.Result
The aseptic survivorship of the acetabular component was 97% (95% confidence interval; 8.1-9.5). The all-cause survivorship of the acetabular component was 91% (95% confidence interval; 7.3-8.1). One patient had an aseptic failure and 2 patients had septic failures. The mean postoperative Harris Hip Score was 76 points (range, 61-91 points). Excluding the aseptic and septic failures, there was no osteolysis or progressive radiolucencies present on radiographic evaluation at final follow-up.Conclusion
At a minimum of 5-year follow-up, the highly-porous titanium acetabular revision shell has excellent survivorship and functional outcomes. Although long-term follow-up is needed to further monitor these implants, the results are promising and demonstrate that this prosthesis may be an excellent option for patients undergoing revision THA. 相似文献18.
Yusuke Osawa Yukiharu Hasegawa Toshiaki Okura Daigo Morita Naoki Ishiguro 《The Journal of arthroplasty》2017,32(3):857-861
Background
We performed periacetabular osteotomy (PAO) combined with intertrochanteric valgus osteotomy (TVO) to obtain better congruity for patients with acetabular dysplasia and nonspherical femoral head. These patients with PAO-combined TVO demonstrate long-term progression of osteoarthritis, thereby, needing conversion to total hip arthroplasty (THA) and is difficult due to morphological changes. The objective of the present study was to investigate outcomes of patients who underwent THA after PAO-combined TVO.Methods
We performed 3 groups' case-control study. The participants were 20 patients (20 hips) who underwent THA after PAO-combined TVO (PAO-TVO group); these patients had a mean age at surgery of 56.3 years and underwent postoperative follow-up for a mean period of 6.8 years. For the control group, we included 53 patients (57 joints) who underwent THA after PAO and 76 patients (80 joints) who underwent primary THA for hip dysplasia matching age, sex, and time of surgery.Results
Harris hip score at the last follow-up was significantly poorer in PAO-TVO group compare with PAO group and primary group. Short Form-36 of Physical Component Summary was significantly poorer in PAO-TVO group compared with primary group. The socket position in the PAO-TVO group was significantly superior and lateral compared with that in the primary THA group. Considering socket placement in Lewinnek's safe zone and stem malalignment, there were no significant differences in the 3 groups.Conclusion
Harris hip score and Short Form-36–Physical Component Summary for THA after PAO-combined TVO were significantly poorer compared to those of primary THA. 相似文献19.
Prateek Goyal Adrian Lau Douglas D. Naudie Matthew G. Teeter Brent A. Lanting James L. Howard 《The Journal of arthroplasty》2017,32(3):843-848
Background
Acetabular component positioning is crucial to a successful total hip arthroplasty (THA). This study evaluated the effect of absolute acetabular component position as well as acetabular position relative to bony anatomy on patient-reported functional outcomes after primary THA.Methods
Primary, press fit, hemispherical metal-on-polyethylene THA performed between 2003 and 2011 were analyzed. Western Ontario and McMaster Osteoarthritis Index (WOMAC), Harris Hip Score (HHS), Short Form-12 scores, and radiographs between 2 and 3 years after the index procedure were assessed.Results
Of the 1241 primary THA included, the mean abduction and anteversion angles were 44.4 ± 6.94 and 21.7 ± 11.9 degrees, respectively. The mean anterior and lateral overhang were 1.9 ± 3.6 and 2.5 ± 3.4 mm, respectively. There was no correlation between functional outcomes and acetabular inclination. A weak positive correlation between anteversion and HHS (P < .001) and WOMAC (P = .02) scores was found. For relative position, anterior overhang of the acetabular component beyond the bone resulted in inferior Short Form-12 physical function (P = .001), HHS (P = .004), and WOMAC (P < .001) scores compared to those with bony coverage. Mean HHS pain score was 41.20 ± 5.69 in patients with lateral overhang and 41.97 ± 5.04 in those who had bony coverage of the lateral edge of the acetabular component (P = .02).Conclusion
The tribology and biomechanics of acetabular component position have been extensively studied without examination of how it affects patient function. Although statistical significance was seen, clinical outcome scores were not sensitive enough to show a clinically significant effect of the absolute or relative position of the acetabular component. 相似文献20.
Yoshitoshi Higuchi Yukiharu Hasegawa Daigo Komatsu Taisuke Seki Naoki Ishiguro 《The Journal of arthroplasty》2017,32(5):1641-1646