共查询到20条相似文献，搜索用时 437 毫秒
1.
Emily B. Gaillard Melissa D. Gaillard Thomas P. Gross 《The Journal of arthroplasty》2017,32(11):3404-3411
Background
Women seeking surgical intervention for their hip disorders will often find total hip arthroplasty (THA) presented as their only option. THA, when compared with hip resurfacing arthroplasty, removes substantially more bone-stock, limits range-of-motion, exhibits increased dislocation risk, and presents greater overall 10-year mortality rate. Despite these risks, most surgeons continue to select against women for hip resurfacing because registries notoriously report inferior survivorship when compared with men and THA.Methods
We investigated the reasons for why resurfacing arthroplasty devices survive poorly in women to develop interventions which might improve hip resurfacing outcomes in women. Using these findings, we developed a series of surgical interventions to treat the underlying issues. Herein, we compare 2 study groups: women who received hip resurfacings before (group 1) and after (group 2) these interventions.Results
Eight-year implant survivorship substantially improved from 89.6% for group 1 to 97.7% for group 2. Adverse wear-related failure, femoral component loosening, and acetabular component loosening were all significantly reduced in group 2, which we attribute to the implementation of our relative acetabular inclination limit guidelines, use of uncemented femoral fixation, and selection of the Tri-Spike acetabular component for supplemental fixation, respectively. Kaplan-Meier implant survivorship curves, grouped into 2-year time intervals, show that the disparity in failure rates between men and women is diminishing.Conclusion
When experienced surgeons use refined and proper surgical technique, women show promise as excellent candidates for hip resurfacing as an alternative treatment for their debilitating hip conditions. 相似文献2.
Jared S. Bookman Ian D. Kaye Kevin K. Chen Fredrick F. Jaffe Ran Schwarzkopf 《The Journal of arthroplasty》2017,32(8):2587-2589
Background
Short-term and intermediate-term wear rates for highly cross-linked polyethylene (HCLPE) liners in total hip arthroplasty (THA) are significantly lower than published rates for traditional polyethylene liners. The aim of this study was to report the longest-to-date follow-up of a specific HCLPE liner.Methods
A series of 35 THAs using a specific HCLPE liner were reviewed. Anteroposterior radiographs were reviewed for femoral head penetration, the presence of femoral and/or acetabular osteolysis, long-term survival, total wear, and wear rates in all patients.Results
The average patient age at time of surgery was 70 years with an average follow-up of 10 years (118 months; range, 7.2-13.4 years). The mean wear rate in our cohort was 0.07 mm/y. Total wear was 0.71 mm over the study period. No hips showed evidence of osteolysis in any zones. Survivorship at latest follow-up was 100% with all-cause revision as an end point.Conclusion
The wear rate of HCLPE liners continues to be lower than published wear rates for traditional polyethylene and continues to reaffirm the acceptably low wear rates using HCLPE acetabular liner in primary THA. 相似文献3.
Hirofumi Oshima Sakae Tanaka Yoshio Takatori Takeyuki Tanaka Hisatoshi Ishikura Toru Moro 《The Journal of arthroplasty》2017,32(10):3065-3070
Background
We evaluated the clinical and radiographic outcomes, including femoral head penetration, of total hip arthroplasty performed using a specific polyethylene (PE) liner in small Asian patients at 10 years after the index surgery. In addition, we investigated whether femoral head penetration was affected by patient-related, implant-related, and surgical factors.Methods
Between August 2002 and June 2005, for cementless primary total hip arthroplasty, we used acetabular PE liners that were manufactured from GUR 1050 resin, machined from isostatic compression-molded bar stock, and sterilized with a gamma ray irradiation in argon gas. We assessed 82 hips in 78 patients who received these liners.Results
The mean Harris hip score improved from 41.0 preoperatively to 84.5 at 10 years postoperatively. Periprosthetic osteolysis was observed in 7 hips (9.8%). No acetabular component migration was detected, and no revision surgery was performed 10 years postoperatively. The mean steady-state wear rate was 0.031 mm/y, which was lower than the wear rate for other conventional PE liners of the previous studies. Among the patient-related, implant-related, and surgical factors, sex was significantly associated with the mean steady-state wear rate, with a higher rate in male patients than in female patients.Conclusion
PE acetabular liners used in small Asian patients show similar clinical outcomes and reduced wear compared with those of other liners. In addition, sex is significantly associated with the mean steady-state wear rate, and the steady-state wear rate is higher in male patients than in female patients. 相似文献4.
Ryan J. O&#x;Leary Melissa D. Gaillard Thomas P. Gross 《The Journal of arthroplasty》2017,32(2):437-446
Background
The optimal surgical treatment for osteonecrosis of the femoral head has yet to be elucidated. To evaluate the role of femoral fixation techniques in hip resurfacing, we present a comparison of the results for 2 consecutive groups: group 1 (75 hips) received hybrid hip resurfacing implants with a cemented femoral component; group 2 (103 hips) received uncemented femoral components. Both groups received uncemented acetabular components.Methods
We retrospectively analyzed our clinical database to compare failures, reoperations, complications, clinical results, metal ion test results, and X-ray measurements. Using consecutive groups caused time interval bias, so we required all group 2 patients to be at least 2 years out from surgery; we compared results from 2 years and final follow-up.Results
Patient groups matched similarly in age, body mass index, and percent female. Despite similar demographics, the uncemented, group 2 cases showed a lower raw failure rate (0% vs 16%; P < .0001), a lower 2-year failure rate (0% vs 7%; P = .04), and a superior 8-year implant survivorship (100% vs 91%; log-rank P = .0028; Wilcoxon P = .0026). In cases that did not fail, patient clinical (P = .05), activity (P = .02), and pain scores (P = .03), as well as acetabular component position (P < .0001), all improved in group 2, suggesting advancements in surgical management. There were no cases of adverse wear-related failure in either group.Conclusion
This study demonstrates a superior outcome for cases of osteonecrosis with uncemented hip resurfacings compared to cases employing hybrid devices. 相似文献5.
Prateek Goyal James L. Howard Xunhua Yuan Matthew G. Teeter Brent A. Lanting 《The Journal of arthroplasty》2017,32(5):1670-1674
Background
Studies that have previously examined the relationship between acetabular component inclination angle and polyethylene wear have shown increased wear of conventional polyethylene with high inclination angles. To date, there are no long-term in vivo studies examining the correlation between cup position and polyethylene wear with highly crosslinked polyethylene.Methods
An institutional arthroplasty database was used to identify patients who had metal-on-highly crosslinked polyethylene primary total hip arthroplasty using the same component design with a minimum follow-up of 10 years. A modified radiostereometric analysis examination setup was utilized, recreating standard anteroposterior and cross-table lateral examinations in a single stereo radiostereometric analysis acquisition. The same radiographs were used to measure inclination angle and anteversion.Results
A total of 43 hips were included for analysis in this study. Average follow-up was 12.3 ± 1.2 years. The average linear wear rate was calculated to be 0.066 ± 0.066 mm/y. Inclination angle was not correlated with polyethylene wear rate (P = .82). Anteversion was also not correlated with polyethylene wear rate (P = .11).Conclusion
At long-term follow-up of >10 years, highly crosslinked polyethylene has a very low wear rate. This excellent tribology is independent of acetabular position. The low wear rate highlights the excellent results of metal on highly crosslinked polyethylene, and supports its use in total hip arthroplasty. 相似文献6.
Rohit Rambani David M. Kepecs Tatu J. Mäkinen Oleg A. Safir Allan E. Gross Paul R. Kuzyk 《The Journal of arthroplasty》2017,32(6):1959-1964
Background
Total hip arthroplasty revision for a fractured ceramic bearing is rare but offers unique challenges. The purpose of this review was to provide a summary of existing literature on fractured ceramic bearings.Methods
Two authors performed a literature search of the MEDLINE OVID and PubMed databases with the following search terms: ceramic, fracture, total hip arthroplasty, and revision.Results
The search identified 228 articles of which 199 were selected for review.Conclusions
It is mandatory to perform a complete synovectomy and thorough debridement of the fractured ceramic fragments. A well-fixed acetabular component should be removed if either the locking mechanism is damaged or the component is malpositioned. If the femoral stem taper is damaged, the femoral stem should be removed. However, if minimal damage is present, the femoral stem may be retained and revised using a fourth generation ceramic head with a titanium sleeve. Metal bearings should be avoided and revision with ceramic bearings should be performed whenever possible. 相似文献7.
Xigong Li Yang Lu Junying Sun Xiangjin Lin Tiansi Tang 《The Journal of arthroplasty》2017,32(2):475-479
Background
The purpose of this study was to evaluate the functional and radiographic results of patients with Crowe type-IV hip dysplasia treated by cementless total hip arthroplasty and double chevron subtrochanteric osteotomy.Methods
From January 2000 to February 2006, cementless total hip arthroplasty with a double chevron subtrochanteric shortening osteotomy was performed on 18 patients (22 hips) with Crowe type-IV dysplasia. The acetabular cup was placed in the position of the anatomic hip center, and subtrochanteric femoral shortening osteotomy was performed with the use of a double chevron design. The clinical and radiographic outcomes were reviewed with a mean follow-up of 6.5 years (5-10 years).Results
The mean amount of femoral subtrochanteric shortening was 38 mm (25-60 mm). All osteotomy sites were healed by 3-6 months without complications. The mean Harris Hip Score improved significantly from 47 points (35-65 points) preoperatively to 88 points (75-97 points) at the final follow-up. The Trendelenburg sign was corrected from a positive preoperative status to a negative postoperative status in 12 of 22 hips. No acetabular and femoral components have loosened or required revision during the period of follow-up.Conclusion
Cementless total hip arthroplasty using double chevron subtrochanteric osteotomy allowed for restoration of anatomic hip center with safely functional limb lengthening, achieved correction of preoperative limp, and good functional and radiographic outcomes for 22 Crowe type-IV dislocation hips at the time of the 5- to 10-year follow-up. 相似文献8.
Mariano Fernández-Fairen Miquel Punset Antonio Murcia-Asensio Francisco Ferrero-Manzanal José Sueiro Javier Gil 《The Journal of arthroplasty》2017,32(12):3782-3795
Background
Besides promising results of metal-on-metal (MOM) hip arthroplasty (HA), frequent failures have been reported even in the short term. Many host, surgical, design, metallurgical, and processing factors have been evoked in the base of these events. We have tried to characterize and to evaluate metallurgical and processing features present in this type of implants.Methods
The acetabular and femoral components of 20 MOM HAs collected from a multicenter retrieval program were examined. All the specimens were inspected with naked eye, with confocal microscopy and vertical scanning interferometry, scanning electron microscopy, back-scattered electron imaging, and energy-dispersive X-ray spectroscopy, in 25 zones of each articular component.Results
Gas pores, shrinkage voids and holes of detached carbides, carbides on surface, embedded particles, scratches and marks of wear, surface discoloration, surface deposits, and tribochemical reaction layers were widely dispersed through a substantial percentage of the total bearing surface in all the implanted components. Surface cup and head voids, and cup scratches showed significant correlation with the clearance of pair. A higher surface damage of the cup and head was observed mainly in the low clearance prostheses. There was no other significant correlation or difference in the incidence and importance of any of these defects between resurfacing hip arthroplasties and total hip arthroplasties, or according to the pair diameter.Conclusion
Some metallurgical features and surface damage were significantly present in the retrieved implants of MoM HAs. It would be desirable to improve the structure and metallurgical characteristics of these implants to avoid those effects and optimize their performance. 相似文献9.
Jonathan G. Haw Andrew K. Battenberg Der-Chen T. Huang Thomas P. Schmalzried 《The Journal of arthroplasty》2017,32(4):1381-1386
Background
Cross-linked polyethylene (XLPE) has demonstrated significantly reduced wear and osteolysis into the second decade for total hip arthroplasty. There is a relative paucity of data with ≥36-mm bearings. Issues include potential effects of reduced liner thickness and component position on wear, osteolysis, and mechanical failure of the bearing.Methods
Radiographs of 48 primary total hip arthroplasties with ≥36-mm modular XLPE bearings were analyzed at a minimum 5 years postoperative on serial radiographs using a validated, edge-detection-based algorithm. Subgroups were examined to assess the effect of bearing diameter, liner thickness, acetabular abduction angle, and acetabular anteversion on XLPE wear.Results
There was no significant difference in volumetric wear when subgroups were stratified by component factors: liner thickness (<6.5 mm vs ≥6.5 mm) 40.69 mm3/y vs 24.47 mm3/y, respectively (P = .315); acetabular component abduction angle (<45° vs ≥45°): 38.68 mm3/y vs 27.8 mm3/y, respectively (P = .522); acetabular anteversion (<20° vs ≥20°): 41.32 mm3/y vs 31.79 mm3/y, respectively (P = .521). There were no dislocations, mechanical failures, or revisions. There were 7 hips with volumetric wear rates ≥80 mm3/y; 1 had possible osteolysis.Conclusion
Larger-diameter XLPE wear was not measurably affected by liner thickness, acetabular abduction angle, or acetabular anteversion. However, there is a trend for increasing volumetric wear with increasing bearing size. Wear outliers do occur, and continued follow-up of larger-diameter XLPE bearings is warranted. 相似文献10.
David P. Gwynne-Jones Heath W.R. Lash Andrew W. James Ella E. Iosua John A. Matheson 《The Journal of arthroplasty》2017,32(8):2444-2449
Background
There are relatively few 20-year results of uncemented acetabular components, and most of these are modular designs. This study reports the 20-year results of a monoblock press-fit acetabular component.Methods
A total of 122 total hip arthroplasties (111 patients) using the Morscher cup were reviewed at a mean of 19.7 years. The average age at implantation was 57.3 years (range, 36-74 years), and 81 (66%) were men.Results
Twenty-two patients (25 hips) had died. Seven hips were revised, including 5 acetabular revisions. Six patients (6 hips) declined to participate but were known not to have been revised. The mean Oxford hip score was 41.1 (range, 22-48), and the mean reduced Western Ontario and McMaster Universities Osteoarthritis Index score was 5.7/48 (range, 0-24). Eccentric wear was seen in 13 (15.7%) and major osteolysis in 14 (17%) of 82 surviving hips with radiographs. The all-cause revision rate was 0.32 per 100 observed component years (95% confidence interval [CI], 0.13-0.66). The 20-year Kaplan-Meier survival was 93.4% (CI, 86.6-96.8) for all-cause revisions, 95.5% (CI, 89.4-98.1) for any acetabular revision, and 97.1% (CI, 91.2-99.1) for acetabular aseptic loosening, wear, or osteolysis.Conclusion
The Morscher acetabular component has continued to perform well at 20 years despite using conventional polyethylene with results that match or surpass other cementless acetabulae. 相似文献11.
Georg Matziolis Linda Krakow Frank Layher Klaus Sander Joerg Bossert Steffen Brodt 《The Journal of arthroplasty》2017,32(12):3802-3805
Background
The most common reason for revision total hip arthroplasty remains polyethylene wear. Development dysplasia of the hip and revision situations requires a conscious compromise of implant position. The surgeon should know about the consequence on wear via a possible change in hip contact force. The objective of this study is to investigate whether annual wear is dependent on hip contact force.Methods
Forty-five inserts (DuraLoc, DePuy) that were explanted in our department were included. Three-dimensional gravimetric determination of the wear was performed by fluid displacement. Then, the hip contact force was determined using radiographs according to the Blumentritt model.Results
No correlation was found between patient-specific factors and the annual wear. The hip contact force estimated by the Blumentritt model also showed no correlation between hip contact force and annual wear. Two single model parameters correlated significantly with wear: VRECAB as a ratio of the lever length of the spinocrural and the pelvitrochanteric muscles and the angle Alpha as a measure of the position of the center of rotation in relation to the greater trochanter. The greater the ratio spinocrural/pelvitrochanteric lever arm (R = 0.408, P = .005) and the greater the Alpha angle (more valgus the femoral neck) (R = 0.377, P = .011) were, the greater was the wear.Conclusion
These results lead to the conclusion that neither patient-specific factors nor the estimated hip contact force have a major influence on annual wear in the case of DuraLoc cups. Only a coxa valga and a small femoral offset contribute in a limited amount to an increase in wear. 相似文献12.
Min Chen Zhengliang Luo Xiaofeng Ji Peng Cheng Guolin Tang Xifu Shang 《The Journal of arthroplasty》2017,32(1):131-138
Background
The direct anterior approach (DAA) for total hip arthroplasty (THA) is typically performed in the supine position using a specially designed operating room table, which makes this approach more accessible to orthopedic surgeons. We attempted to perform this procedure in the lateral decubitus position on an ordinary operation table to avoid dependence on a special operating room table. There is an obvious absence of literature regarding this subject.Methods
A total of 248 patients (295 hips) were recruited for primary THAs from July 1, 2014 to December 31, 2014. In total, 126 hips (42.7%) underwent THAs using the DAA in the lateral decubitus position. The technical feasibility and early results were evaluated.Results
The orientation of the acetabular component was 16.5° ± 4.9° anteversion and 43.3° ± 3.5° abduction. Intraoperative proximal femoral fracture occurred in one hip. The superficial wound complications occurred in 2 hips and the hematoma in one hip while in hospital. The lateral femoral cutaneous nerve injury was noted in 43 hips. The early dislocation occurred in 2 hips. Heterotopic ossification was Brooker class I in 5 hips and class II in 1 hip. No aseptic loosening, postoperative periprosthetic fracture, and deep infection occurred in our series.Conclusion
The DAA for THA in the lateral decubitus position may be a valuable alternative if the DAA in the supine position is difficult to implement owing to absence of a special operating room table. This technique also seems to provide satisfactory clinical and radiographic outcomes with an acceptable complication in our early follow-up. 相似文献13.
Vahit Emre Ozden Goksel Dikmen Burak Beksac Ismail Remzi Tozun 《Journal of orthopaedic science》2017,22(3):517-523
Background
To evaluate the long-term clinical and radiological outcomes of cementless total hip arthroplasty (THA) in high riding hip dislocated patients with previous proximal femoral osteotomy.Methods
Twenty-one consecutive patients with a mean age forty-two years were treated with cementless THA Step-cut subtrochanteric femoral osteotomy was performed in all twenty-eight hips. Metal on polyethylene (MoP) and ceramic on ceramic (CoC) bearings were used in two different consecutive time periods. The mean follow-up time was twelve years. Harris hip score, limb length discrepancy, complications, union status of the osteotomy, survivorship of constructs were the criteria for evaluation.Results
The mean Harris hip score improved from 39.5 to 88.7 points. The mean limb length discrepancy in unilateral cases decreased from 54.5 mm to 12.3 mm. The mean amount of femoral shortening was 37 mm. The mean union time was 3.5 months and there were no delayed union and non-union. There were three cup and two femoral revisions due to osteolysis in patients who had MoP. There was only one femoral revision in patients who had CoC. The Kaplan Meier survivorship with an end point of any revision of the stem and the acetabular component was 94% (95% CI, 75%–98%) and 92% (95% CI, 74%–99%) at ten years respectively.Conclusions
Total hip arthroplasty with subtrochanteric step-cut femoral shortening is a successful technique to improve the hip functions and reconstruct limb length discrepancy in young patients with proximal femoral deformities. 相似文献14.
Scott M. Eskildsen Zenus J. Wilson David C. McNabb Christopher W. Olcott Daniel J. Del Gaizo 《The Journal of arthroplasty》2017,32(11):3474-3479
Background
In the setting of acetabular deficiency during total hip arthroplasty (THA), the medial protrusio technique (MPT) allows for increased component coverage while avoiding excessive component abduction or elevation of the hip center. The technique involves controlled reaming through the medial acetabular wall while maintaining the continuity of the anterior and posterior columns. The purpose of this study is to analyze the results of the largest reported series to date of primary and revision THAs using the MPT.Methods
A retrospective review of THAs performed by a single surgeon from July 2004 to July 2010 identified 102 patients who underwent THA necessitating the use of the MPT (primary 86 and revision 16), with at least 2 years follow-up.Results
This study reports the largest series to date of primary and revision THAs using the MPT for acetabular deficiency. Postoperatively, mean Harris hip score was 86 (range 31-96). There was no correlation with degree of medialization and change in Harris hip score (P = .12). At mean follow-up of 41.1 months (range 24-92 months), there were no intrapelvic structure injuries and no acetabular components required revision. The MPT provided a safe and effective method for addressing acetabular deficiency and avoiding component malposition.Conclusion
The MPT provided a safe and effective method for addressing acetabular deficiency in this large series of patients. The technique was successful at improving component coverage while maintaining an anatomic hip center and avoiding excessive component abduction. Fixation remained durable with no cases of loosening at final follow-up. 相似文献15.
Jean Y. Lazennec Frederic Thauront Christopher B. Robbins Aidin E. Pour 《The Journal of arthroplasty》2017,32(11):3550-3556
Background
Although most hip dislocations occur in either standing or sitting position, the safe zone for implant position is defined for the supine position. Our goal was to determine preoperative and postoperative pelvis and hip orientations and whether the safe zone defined in supine position can be used to assess standing radiographs.Methods
Preoperative and postoperative three-dimensional EOS images were assessed in 66 total hip arthroplasty patients. None of the patients had dislocation within the follow-up period (12-36 months). The acetabular anteversion (both anterior pelvic plane [APP] and patient functional plane) and the femoral anteversion were measured. The sacral slope, pelvic version, pelvic inclination, and pelvic incidence were also measured.Results
Acetabular anteversion increased postoperatively in both APP and patient functional plane (P <.001). Femoral neck anteversion decreased postoperatively (P =.0942). Sacral slope was 42.4° (?25.9° to 24°) preoperatively compared with 40.3° (?4.1° to 64.2°) postoperatively (P =.013). Pelvic version changed from 15.2° (?10.4° to 43.8°) to 17.2° (?6° to 46.7°; P = 0.008). Pelvic inclination was 1.12° (?25.9° to 24°) before total hip arthroplasty and ?1.2° (?40.7° to 23.4°) postoperatively (P =.005).Conclusion
The acetabular and femoral implant orientations in standing position reside out of the safe zone in most patients. The APP is not vertical in standing position in most patients due to anterior or posterior pelvic tilt. The proposed safe zone in supine position may not be a useful measure in the assessment of standing radiographs of patients with significant anterior or posterior pelvic tilt.Level of Evidence
Level IV, therapeutic case series study. 相似文献16.
Jun-Il Yoo Javad Parvizi Ji-ung Song Yong-Chan Ha Young-Kyun Lee Kyung-Hoi Koo 《The Journal of arthroplasty》2017,32(7):2199-2203
Background
In total hip arthroplasty (THA) of hips with coxa vara, the femoral stems might be inserted in a varus alignment. To avoid varus insertion, we designed a technique, which we termed “trochantoplasty.” In this procedure, the medial half of the greater trochanter was removed during THA.Methods
We evaluated 30 patients (31 hips) who had coxa vara deformity and underwent THA using trochantoplasty at the mean follow-up of 5 years (range, 3-9 years).Results
All stems were inserted in the neutral position. One Vancouver type 1 periprosthetic femoral fracture occurred after a fall at postoperative 2 months. At the latest follow-up, the mean power of abductor was 4.3 (range, 3-5). Four patients had moderate limp whereas 26 patients had slight limp. The abduction at 90° flexion ranged from 15° to 45° (mean, 35°). There was no revision. All prostheses had bone-ingrown stability without any detectable wear or osteolysis. The mean Harris hip score was improved from 66.9 to 89.4 points.Conclusion
Trochantoplasty can be used to avoid varus insertion of the femoral stem while performing THA in patients with coxa vara deformity without compromising the abductor mechanism. 相似文献17.
Ahmed El-Bakoury Hazem Hosny Mark Williams Jonathan Keenan Rathan Yarlagadda 《The Journal of arthroplasty》2017,32(2):541-545
Background
Periprosthetic fracture following total hip arthroplasty is a significant problem faced by hip surgeons, and its management in elderly patients remains a considerable challenge.Methods
We retrospectively reviewed 28 Vancouver B2 and B3 periprosthetic femoral fractures (PFF) treated with revision of the femoral stems by distally locked, hydroxyapatite-coated uncemented stems (Cannulok). Patients were aged 75 years or older at the time of surgery.Results
The mean follow-up was 44.6 months (range, 24-102). The mean postoperative Oxford hip score was 30.1 (range, 10-46). The rate of fracture union was 95.8%, and the survivorship of the stem was 100% at the end of follow-up.Conclusion
The management of PFF in elderly is associated with increased postoperative morbidity and mortality. The use of a distally locked, hydroxyapatite-coated femoral stem is a valid option for the treatment of PFF to achieve fracture union with a low rate of revision. 相似文献18.
Background
Patients with destructive acetabular lesions are at high risk for morbidity. Harrington described reinforcing acetabular diseased bone with methylmethacrylate, supplemented by metal fixation, to allow total hip reconstruction. However, all published studies using this technique report dislocations. We believe that initial use of constrained liners would help alleviate dislocation risk, without increasing component loosening or polyethylene wear.Methods
Sixty-eight patients who underwent Harrington hip arthroplasties for metastatic cancer from August 2005 to March 2015 were identified. All patients had a constrained acetabular liner implanted during their index procedure. Electronic medical records and radiographs were reviewed. A literature review of studies with similar technique was used as a historical control.Results
Forty-seven patients (69.2%) died 22.7 ± 22.7 months after surgery, at age 62.4 ± 17.2 years. At an average clinical follow-up of 9.9 ± 14.2 months (range 2-50 months), we found no incidents of dislocation. No patients had component failure requiring revision or evidence of loosening on x-ray. Thirteen papers, comprising 185 patients, demonstrated 39 patients (21.1%) with dislocations and 13 patients (7.0%) requiring revision surgery for aseptic loosening.Conclusion
Modified Harrington technique has demonstrated relative durability when reconstructing metastatic acetabular disease, although dislocation occurs in approximately 20% of patients. This study demonstrates that initial use of a constrained liner can alleviate postoperative dislocations without increasing risk of perioperative complications. Even modest reduction in complications during the limited lifespan of oncologic patients can have dramatic positive effects on quality of life. 相似文献19.
Ryosuke Yamaguchi Takuaki Yamamoto Goro Motomura Satoshi Ikemura Kenyu Iwasaki Garida Zhao Yukihide Iwamoto 《Journal of orthopaedic science》2017,22(4):687-692
Background
Although several morphological abnormalities or variances of the hip joint have been proposed to be associated with hip joint degeneration, few studies have investigated any radiological features in patients with transient osteoporosis of the hip (TOH). The purpose of this study is to evaluate the morphological variances of the hip joint in TOH patients radiographically.Methods
The TOH group consisted of 31 hips in 31 patients. Age- and gender-matched asymptomatic hips in patients with unilateral osteonecrosis of the femoral head were served as controls. Radiographs and MRI were utilized to examine the following parameters: acetabular dysplasia, acetabular overcoverage, acetabular retroversion, and asphericity of the femoral head–neck junction. Also, localization of the main bone marrow edema (BME) lesion was investigated.Results
TOH patients had a significantly higher incidence of acetabular retroversion (52% with a positive cross-over sign and 29% with posterior wall deficiency) than the controls (13%, P = 0.0023; 6%, P = 0.043, respectively), which was also confirmed by smaller acetabular anteversion angles on axial MRI. In addition, TOH patients tended to show asphericity of the anterior femoral head–neck junction compared to controls (39% vs. 13%, P = 0.040). In 90% of the TOH patients, the main BME lesion was located in the subchondral area of the superior portion of the femoral head, and 77% of the lesion were recognized as a band-like pattern in MRI.Conclusions
Acetabular retroversion and asphericity of the femoral head–neck junction were more commonly observed in TOH patients compared to controls. The main BME lesion was most frequently located in the superior portion of the femoral head. 相似文献20.
Matthew J. Harris Jason Tam Steven J. Fineberg Paul A. Lucas Steven B. Zelicof 《The Journal of arthroplasty》2017,32(1):296-299