Evaluating Alternate Registration Planes for Imageless,Computer-Assisted Navigation During Total Hip Arthroplasty

BackgroundImageless computer navigation improves component placement accuracy in total hip arthroplasty (THA), but variations in the registration process are known to impact final accuracy measurements. We sought to evaluate the registration accuracy of an imageless navigation device during THA performed in the lateral decubitus position.MethodsA prospective, observational study of 94 patients undergoing a primary THA with imageless navigation assistance was conducted. Patient position was registered using 4 planes of reference: the patient’s coronal plane (standard method), the long axis of the surgical table (longitudinal plane), the lumbosacral spine (lumbosacral plane), and the plane intersecting the greater trochanter and glenoid fossa (hip-shoulder plane). Navigation measurements of cup position for each plane were compared to measurements from postoperative radiographs.ResultsMean inclination from radiographs (41.5° ± 5.6°) did not differ significantly from inclination using the coronal plane (40.9° ± 3.9°, P = .39), the hip-shoulder plane (42.4° ± 4.7°, P = .26), or the longitudinal plane (41.2° ± 4.3°, P = .66). Inclination measured using the lumbosacral plane (45.8° ± 4.3°) differed significantly from radiographic measurements (P < .0001). Anteversion measured from radiographs (mean: 26.1° ± 5.4°) did not differ significantly from the hip-shoulder plane (26.6° ± 5.2°, P = .50). All other planes differed significantly from radiographs: coronal (22.6° ± 6.8°, P = .001), lumbosacral (32.5° ± 6.4°, P < .0001), and longitudinal (23.7° ± 5.2°, P < .0001).ConclusionPatient registration using any plane approximating the long axis of the body provided a frame of reference that accurately measured intraoperative cup position. Registration using a plane approximating the hip-shoulder axis, however, provided the most accurate and consistent measurement of acetabular component position.     

Efficacy of a Pelvic Lateral Positioner With a Mechanical Cup Navigator Based on the Anatomical Pelvic Plane in Total Hip Arthroplasty

Background

The acetabular component orientation in total hip arthroplasty (THA) is of critical importance to the good clinical results. However, traditional widely used cup alignment guides for cup placement are reported to be relatively unreliable. The present study aims at comparing a novel cup alignment guide, which can be attached to our anatomical pelvic plane (APP) pelvic lateral positioner for reducing discrepancies in sagittal pelvic tilt and indicate a targeted cup angle based on the APP, with a conventional cup alignment guide.

Portable Accelerometer-Based Navigation System for Cup Placement of Total Hip Arthroplasty: A Prospective,Randomized, Controlled Study

BackgroundMalposition of the acetabular component during total hip arthroplasty (THA) is associated with increased risk of dislocation, reduced range of motion, and accelerated wear. The purpose of this study is to compare cup positioning with a portable, accelerometer-based hip navigation system and conventional surgical technique.MethodsIn a prospective, randomized, clinical study, cups were implanted with a portable, accelerometer-based hip navigation system (navigation group; n = 55) or conventional technique (conventional group; n = 55). THA was conducted in the lateral position and through posterior approach. The cup position was determined postoperatively on pelvic radiograph and computed tomography scans.ResultsAn average cup abduction of 39.2° ± 4.6° (range, 27° to 50°) and an average cup anteversion of 14.6° ± 6.1° (range, 1° to 27.5°) were found in the navigation group, and an average cup abduction of 42.9° ± 8.0° (range, 23° to 73°) and an average cup anteversion of 11.6° ± 7.7° (range, −12.1° to 25°) in the conventional group. A smaller variation in the navigation group was indicated for cup abduction (P = .001). The deviations from the target cup position were significantly lower in the navigation group (P = .001, .016). While only 37 of 55 cups in the conventional group were inside the Lewinnek safe zone, 51 of 55 cups in the navigation group were placed inside this safe zone (P = .006). The navigation procedure took a mean of 10 minutes longer than the conventional technique.ConclusionUse of the portable, accelerometer-based hip navigation system can improve cup positioning in THA.     

The Impact of Total Hip Arthroplasty on Pelvic Motion and Functional Component Position is Highly Variable

Background

This study's purpose was to determine the impact of THA implantation on pelvic motion, and to assess motion in patients with a history of lumbar fusion or prosthetic dislocation.

Patient Obesity Influences Pelvic Lift During Cup Insertion in Total Hip Arthroplasty Through a Lateral Transgluteal Approach in Supine Position

Background

Movement of the pelvis during implantation of total hip arthroplasty (THA) has a major influence on the positioning of the acetabular cup. Strong traction caused by retractors leads to iatrogenic pelvic lift and can thus be partly responsible for cup malpositioning. The objective of this study was to investigate such factors that influence pelvic lift.

Revision Total Hip Arthroplasty Using Imageless Navigation With the Concept of Combined Anteversion

Background

The purpose of the study was to evaluate the implant positions and clinical results of revision total hip arthroplasty (THA) using an imageless navigation with the concept of combined anteversion.

Primary Total Hip Arthroplasty in Severe Dysplastic Hip Osteoarthritis With a Far Proximal Cup Position

Background

Developmental hip dysplasia is the most common cause of secondary hip osteoarthritis. Due to severe acetabular bone deficiency, cup positioning in total hip arthroplasty (THA) of dysplastic hips remains a surgical challenge. The aim was to analyze the functional outcome of far proximal cup positions in primary THA.

Prior Pelvic Osteotomy Affects the Outcome of Subsequent Total Hip Arthroplasty

BackgroundAlthough pelvic osteotomy (PO) is an important surgical procedure that can alleviate symptoms and potentially slow progression of osteoarthritis in patients with development dysplasia of the hip, some patients eventually require conversion to total hip arthroplasty (THA). This study aimed to determine the outcome of conversion THA in patients with prior PO.MethodsForty nine patients with a history of prior PO who underwent conversion THA at a single institution were matched at a 1:3 ratio based on the date of surgery, age, gender, and body mass index with 147 developmental dysplasia of the hip patients who underwent primary THA without prior PO. A retrospective chart review was performed to compare outcomes at a minimum follow-up of 2 years.ResultsPatients with prior PO required more supplemental screw fixation for the acetabular component (59.2% vs 38.1%, P = .016), more autologous bone grafting (24.5% vs 11.6%, P = .048), had a longer mean operative time (106.0 vs 79.8 minutes, P < .001), and greater estimated blood loss (350.0 vs 206.8 mL, P = .015). Patients with prior PO had smaller cup version angle (26.0° vs 29.0°, P = .012) and greater discrepancy in the limb length (10.3 vs 7.26 mm, P = .041). Eight hips (16.3%) with prior PO and 6 (4.1%) without osteotomy required reoperation (P = .008). There was no difference in outcome scores at the latest follow-up.Conclusion: THA after prior PO is technically demanding, leading to longer operative times, greater blood loss, and variation in implant placement. Although functional outcomes are similar, THA after a prior PO is more likely to require reoperation.ConclusionTHA after prior PO is technically demanding, leading to longer operative times, greater blood loss, and variation in implant placement. Although functional outcomes are similar, THA after a prior PO is more likely to require reoperation.     

Application of Computed Tomography-Based Navigation for Revision Total Hip Arthroplasty

The usefulness of navigation systems for revision total hip arthroplasty (THA) remains unclear. The purpose of this study was to evaluate the accuracy of cup positioning using a navigation system in revision THA. Cup alignment of thirty revision cases was evaluated. Data were also compared with those of 30 navigated primary THA cases. In the revision THA group, mean difference in postoperative measurement from preoperative plan was 0.5 ± 4° (range, − 9° to 8°) for inclination and − 0.07° ± 5° (− 14° to 13°) for anteversion. Mean difference in postoperative measurement from intraoperative record was 0.7° ± 3° (− 5° to 8°) for inclination and − 0.7° ± 3° (− 12° to 5°) for anteversion. Compared with the primary THA group, none of these parameters were significantly different. This navigation system was useful even in revision THA.     

Inferomedial Hip Center Decreases Failure Rates in Cementless Total Hip Arthroplasty for Crowe II and III Hip Dysplasia

Background

We sought to evaluate the outcomes of cementless acetabular components used in patients with Crowe II and III dysplasia, and to compare outcomes between cups placed within vs outside of an “anatomic” zone. Our specific aims were to (1) plot hip centers in these patients at our institution to characterize “anatomic” vs “nonanatomic” positions, (2) evaluate the association between hip center and radiographic loosening, (3) determine whether hip center was associated with acetabular component revision, and (4) compare patient-reported outcome scores between groups.

Limitations of Imageless Computer-Assisted Navigation for Total Hip Arthroplasty

We prospectively evaluated acetabular cup placement in total hip arthroplasty with an imageless computer navigation system or using conventional manual technique. The achieved cup orientation in the manual group had substantially larger variances and greater placement error than the navigation cases. The use of navigation was abandoned in 3 cases because of excessive pelvic tilt and unreliable registration of the pelvis. Computer navigation system helped improve the accuracy of the acetabular cup placement for total hip arthroplasty in this study. The variation between the intraoperative navigation readings and the computed tomographic values suggests that relying on palpation of bony landmarks through drapes and tissue is a limitation of this method. Further, the variation in pelvic tilt has an effect on cup placement that requires further studies.     

Learning Curve of Acetabular Cup Positioning in Total Hip Arthroplasty Using a Cumulative Summation Test for Learning Curve (LC-CUSUM)

Despite advances in surgical techniques and instrumentation, optimal cup positioning in total hip arthroplasty (THA) is challenging with a limited accuracy. We evaluated whether a learning curve exists for the optimal cup positioning, using the LC-CUSUM test (Learning curve cumulative summation test). We evaluated the first 100 consecutive THA performed by two surgeons, who had a year of fellowship training in the same teaching hospital. A learning curve of cup positioning was plotted in each series using the LC-CUSUM score. There was no significant difference of numbers of outlier between two surgeons (P = 0.079). Both surgeons completed the learning curve of optimal cup positioning before 50 procedures, and maintained competence. A substantial learning period is necessary in the optimal positioning of an acetabular cup.     

Change in Pelvic Sagittal Inclination From Supine to Standing Position Before Hip Arthroplasty

Background

Cup anteversion and inclination are important for avoiding implant impingement and dislocation in total hip arthroplasty. However, functional cup anteversion and cup inclination also change as the pelvic sagittal inclination (PSI) changes. Therefore, PSI in both supine and standing positions was measured in a large cohort in this study.

Monolithic Dual Mobility Cup Total Hip Arthroplasty Has High Complication Rates With Surgical Fixation in Elderly With Femur Neck Fracture

BackgroundThis study is prospectively conducted to evaluate surgical complications of monolithic dual mobility cup total hip arthroplasty (THA) in elderly patients with fractured neck of the femur.MethodsNinety-seven patients (97 hips) with displaced femoral neck fracture who gave informed consent for participation were prospectively enrolled. Their mean age was 76.6 years (range, 60-95 years), and the mean bone mineral density T-score of neck of the femur was −2.8 (range, −1.2 to −5.5). All patients underwent THA with monolithic dual mobility cup, and computed tomography scans were obtained to evaluate radiographic parameters including anteversion, inclination, and loosening of acetabular cups, and periprosthetic acetabular fractures.ResultsWith regard to cup orientation, mean inclination angle was 40.2° (range, 23.5°-63°) and mean anteversion was 32.6° (range, 7°-66.2°). The proportion of surgical outliers was 10.3% (10/97) in inclination and 35.1% (34/97) in anteversion. Early cup loosening within 2 weeks was detected in 2 hips. Periprosthetic acetabular fractures were identified in 6 hips (6/97, 6.2%). Of the 6 fractures, 5 nondisplaced fractures were healed with conservative management, but 1 fracture with displacement eventually led to cup loosening and the patient underwent revision surgery. Reoperation rate of the monolithic dual mobility cup was 4.1% (4/97).ConclusionThe use of the monolithic dual mobility was associated with improper cup fixation and periprosthetic acetabular fractures in the elderly with poor bone stock, although the dual mobility cup lowered the risk of early dislocation after THA.     

The Effect of Functional Pelvic Tilt on the Three-Dimensional Acetabular Cup Orientation in Total Hip Arthroplasty Dislocations

BackgroundAnterior and posterior pelvic tilt appears to play a role in total hip arthroplasty (THA) stability. When changing from the standing to the sitting position, the pelvis typically rotates posteriorly while the hips flex and this affects the femoro-acetabular positions. This case-control study compares changes in 3-D acetabular cup orientation during functional pelvic tilt between posterior THA dislocations vs stable THAs.MethodsStanding and sitting 3-D cup orientation was compared between fifteen posterior dislocations vs 233 prospectively followed stable THAs. 3-D cup orientation was calculated using previously validated trigonometric algorithms on biplanar radiographs. Those algorithms combine the angles in the three anatomical planes (coronal inclination, transverse version, and sagittal ante-inclination) in the standing position with the change in sagittal pelvic tilt from standing to sitting to calculate the 3-D orientation in the sitting position.ResultsThe standing cup orientation of the dislocated THAs was only characterized by a lower coronal inclination (P = .039). Compared with the controls, from standing to sitting, they showed less posterior pelvic tilt (P < .001). This led to a significant lower coronal inclination (P < .001) and sagittal ante-inclination (P < .001) in the sitting position but similar transverse version (P = .366).ConclusionsComparing posterior THA dislocations to stable THAs, there is a lower increase of all three orientation angles from standing to sitting. This leads to a decreased sitting coronal inclination and sagittal ante-inclination which may lead to an increased risk of impingement ensued by THA instability. By contrast, the transverse version was not significantly different in both positions. This confirms the importance of biplanar data on functional cup orientation.Level of EvidenceDiagnostic, Level III.     

Computer Navigation Helps Reduce the Incidence of Noise After Ceramic-on-Ceramic Total Hip Arthroplasty

Background

Noise after ceramic-on-ceramic (CoC) total hip arthroplasty (THA) is a well-recognized problem. Computer navigation has been shown to achieve desired implant orientation. Our aim was (1) to compare the incidence of noise between navigated and conventional CoC THAs and (2) to determine the factors associated with noise.

Use of Intraoperative X-rays to Optimize Component Position and Leg Length During Total Hip Arthroplasty

Proper femoral and acetabular component position and leg length equality are important intraoperative considerations during total hip arthroplasty. Unfortunately, traditional surgical techniques often lead to suboptimal component position, and such deviations have been associated with increased rates of prosthetic wear, dislocation, component loosening, and patient dissatisfaction. Although surgical navigation has been shown to improve reproducibility of component alignment, such technology is not universally available and is associated with significant costs and additional surgical/anesthetic time. In the current study, we found that a routine intraoperative pelvic radiograph could successfully identify malpositioned components and leg length inequalities and could allow for successful correction of identified problems. Unexpected component malposition and leg length inequality occurred in only 1.5% of cases where an intraoperative pelvic radiograph was utilized.     

Sexual Activity After Total Hip Arthroplasty: A Motion Capture Study

Relative risk of impingement and joint instability during sexual activities after total hip arthroplasty (THA) has never been objectively investigated. Hip range of motion necessary to perform sexual positions is unknown. A motion capture study with two volunteers was performed. 12 common sexual positions were captured and relevant hip joint kinematics calculated. The recorded data were applied to prosthetic hip 3D models to evaluate impingement and joint instability during motion. To explore the effect of acetabular component positioning, nine acetabular cup positions were tested. Four sexual positions for women requiring intensive flexion (> 95°) caused prosthetic impingements (associated with posterior instability) at 6 cup positions. Bony impingements (associated with anterior instability) occurred during one sexual position for men requiring high degree of external rotation (> 40°) combined with extension and adduction at all cup positions. This study hence indicates that some sexual positions could be potentially at risk after THA, particularly for women.     

Computerized Range of Motion Analysis Following Dual Mobility Total Hip Arthroplasty,Traditional Total Hip Arthroplasty,and Hip Resurfacing

Newer arthroplasty designs claim to provide superior range of motion (ROM) and greater stability than their predecessors. However, there is no way to compare ROM of implant systems in an equivalent anatomical environment in a clinical setting. This study used computer-aided design to compare ROM after hip resurfacing, 28 mm THA, 36 mm THA, and anatomic dual mobility (ADM) THA in 3D models of 5 cadaver pelvises. ROM to impingement was then tested in 10 different motions and a one-way ANOVA was used to compare results. The hip resurfacing resulted in restricted ROM compared to the other 3 models in all motions except adduction. The ADM, 36 mm, and 28 mm THA resulted in similar ROM. Dual mobility constructs provide comparable ROM in patients where large head THA is not appropriate.