An Industry Perspective on the Challenges of Using Closed System Transfer Devices with Biologics and Communication Guidance to Healthcare Professionals

Closed system transfer devices (CSTDs) have been used with hazardous drugs for several decades. The goal of this whitepaper is to increase awareness among healthcare professionals, device manufacturers, regulators, and pharmaceutical/biotech companies on the potential issues around the use of CSTDs with biologic drug products to allow their informed use in clinics. Specifically, we discuss the key topics related to the use of CSTDs with biologics products, including components and materials of construction, a breakdown of regulatory, technical, clinical site-related risks and challenges associated with the use of CSTDs with biological products, gathered from stakeholder discussion at the IQ CSTD workshop, and considerations on current testing requirements and communication strategies to drive further dialog on the appropriate use of CSTDs. Given the technical challenges of using CSTDs with biologics, coupled with the current regulations surrounding CSTD approval and proper use, as well as a need for alignment and standardization to enable a consistent strategy for compatibility testing and communication of incompatibilities, it is recommended that global health authorities and other stakeholders seek to understand these issues, in order to alleviate these problems and keep healthcare workers and patients safe from harm.     

Contribution of Intravenous Administration Components to Subvisible and Submicron Particles Present in Administered Drug Product

Particulate matter present in drug products intended for parenteral administration to patients is typically monitored and controlled in the finished drug product to minimize potential risks to patients. In contrast to particulates found in drug products, the current study evaluated particulates representative of materials and operations typically used in the dose preparation and administration of drug products. A comprehensive assessment of intrinsic and extrinsic sources of subvisible and submicron particulates arising from materials associated with subcutaneous and intravenous dose preparation and administration was conducted. In particular, particles arising from disposable syringes, commercial sterile diluents, and intravenous supplies were quantitated using established methods for subvisible (light obscuration, flow imaging) and submicron particles (resistive pulse sensing). Each of these sources contributed varying amounts of particulates; therefore, owing to sources from materials required for administration, it is inadequate to assume that the total particulate load delivered to patients arises solely from the drug product. Careful consideration of the administration method and supplies used can improve the predictability of particulate levels present in dose preparations or administration volumes.     

Innovation in Chemistry,Manufacturing, and Controls—A Regulatory Perspective From Industry

This review describes the landscape of novel modalities such as cell and gene therapies, viruses, other novel biologics, oligomers, and emerging technologies, including modern analytics. We summarize the regulatory history and recent landmark developments in some major markets and examine specific chemistry, manufacturing, and controls (CMC) challenges, including suggestions for exploration of potential science-based approaches in support of regulatory strategy development from an industry perspective. In addition, we evaluate the economic factors contributing to patient access to innovation and discuss the impact of regulation. There is a desperate need for a consistent form of regulation where global approaches to regulatory strategies can be harmonized, and specific CMC challenges can be dealt with using the appropriate science and risk-based tools. Although these tools are well described in current guidance documents, the specifics of applicability to complex novel modalities can still result in differing regulatory advice and outcomes. The future goals for efficiently regulating innovative modalities and technologies could be aided by more regulatory harmonization, regulatory education, and industry cooperation through consortia, enabling industry to supply key information to regulators in a transparent yet well-defined manner, and utilizing mutually understood risk-benefit analyses to produce drugs with appropriate safety, efficacy, and quality characteristics.     

A Systematic Approach to Evaluating Closed System Drug-Transfer Devices During Drug Product Development

The use of Closed System Drug-Transfer Devices (CSTDs) has increased significantly in recent years due to NIOSH and USP recommendations to use them during preparation of hazardous drugs. Mechanistic and material differences between CSTDs and traditional in-use components warrant an assessment of their impact on product quality and dosing accuracy. Using a combination of prevalent CSTDs with biologic molecules, we performed an extensive assessment of the effect of using CSTDs for dose preparation and observed no negative impact on product quality attributes. Additionally, we found that the CSTD hold-up volume is 2 to 4-fold higher than conventional in-use components and exhibited a strong dependence on the CSTD brand used. We also found that the CSTD brand and dosing volume have a major influence on dosing accuracy with suboptimal protein recovery at very low dosing volumes. We identified entrapment of product in the CSTD spike as the root cause for this sub-optimal recovery and found that flushing the CSTD spike with a brand-new syringe and not the dosing syringe aided in complete protein recovery. Taken together we present a systematic approach to evaluate the risks and impact of CSTD to drug product quality, dose preparation, and dosing accuracy.     

Magnetic systems for cancer immunotherapy

Immunotherapy is a rapidly developing area of cancer treatment due to its higher specificity and potential for greater efficacy than traditional therapies. Immune cell modulation through the administration of drugs, proteins, and cells can enhance antitumoral responses through pathways that may be otherwise inhibited in the presence of immunosuppressive tumors. Magnetic systems offer several advantages for improving the performance of immunotherapies, including increased spatiotemporal control over transport, release, and dosing of immunomodulatory drugs within the body, resulting in reduced off-target effects and improved efficacy. Compared to alternative methods for stimulating drug release such as light and pH, magnetic systems enable several distinct methods for programming immune responses. First, we discuss how magnetic hyperthermia can stimulate immune cells and trigger thermoresponsive drug release. Second, we summarize how magnetically targeted delivery of drug carriers can increase the accumulation of drugs in target sites. Third, we review how biomaterials can undergo magnetically driven structural changes to enable remote release of encapsulated drugs. Fourth, we describe the use of magnetic particles for targeted interactions with cellular receptors for promoting antitumor activity. Finally, we discuss translational considerations of these systems, such as toxicity, clinical compatibility, and future opportunities for improving cancer treatment.     

Development of Pyro-Drive Jet Injector With Controllable Jet Pressure

Various jet injectors have been developed and used for the effective and efficient administration of drugs. Jet injections overcome the limitations of other drug delivery methods, such as ablation, iontophoresis, electroporation, sonophoresis, and microneedles, because jet injection is not limited by the diffusion rates of different drugs. However, controlling the jet pressure during drug delivery is difficult with most conventional jet injectors. Efficacy evaluation of such devices on laboratory animals is strongly required before initiating human clinical trials, but minimal research has been performed for the device developments. Therefore, we developed jet injector devices based on pyrotechnics using 2 types of explosives with different burning rates; we call these pyro-drive jet injectors. The liquid jet pressure profile suggests that the penetration depth and injection volume for soft materials and skin tissue are controllable. Here, we propose the pyro-drive jet injectors as another candidate well-controlled jet injector for laboratory animals in drug discovery testing as well as human clinical use.     

Extrapolation: Experience gained from original biologics

Biologicals undergo modifications throughout their commercial lifecycle. Major changes can unintentionally magnify their inherent physicochemical variability. Although trials comparing the pre- and the post-change versions have been requested occasionally, analytical comparison is the most sensitive approach to anticipating clinical equivalence. Therefore, it may be concluded, by means of ‘extrapolation’, that non-identical versions of a given biologic will behave equally in all indications. Despite the lessons learned with original biologics, there are still controversies around the approval of biosimilars through extrapolation. Here, a comprehensive analysis of scattered information allows for an account of cases of original biologic versions approved in some indications with no patient trials involved. Healthcare professionals can be reassured that inasmuch as extrapolation has proven valid for new versions of original biologics, the same holds for biosimilars.     

A practical strategy to develop isoform-selective near-infrared fluorescent probes for human cytochrome P450 enzymes

Currently, the development of selective fluorescent probes toward targeted enzymes is still a great challenge, due to the existence of numerous isoenzymes that share similar catalytic capacity. Herein, a double-filtering strategy was established to effectively develop isoenzyme-specific fluorescent probe(s) for cytochrome P450 (CYP) which are key enzymes involving in metabolism of endogenous substances and drugs. In the first-stage of our filtering approach, near-infrared (NIR) fluorophores with alkoxyl group were prepared for the screening of CYP-activated fluorescent substrates using a CYPs-dependent incubation system. In the second stage of our filtering approach, these candidates were further screened using reverse protein-ligand docking to effectively determine CYP isoenzyme-specific probe(s). Using our double-filtering approach, probes S9 and S10 were successfully developed for the real-time and selective detection of CYP2C9 and CYP2J2, respectively, to facilitate high-throughput screening and assessment of CYP2C9-mediated clinical drug interaction risks and CYP2J2-associated disease diagnosis. These observations suggest that our strategy could be used to develop the isoform-specific probes for CYPs.     

Nitrosamine Contamination in Pharmaceuticals: Threat,Impact, and Control

Nitrosamine-contaminated medicinal products have raised safety concerns towards the use of various drugs, not only valsartan and all tetrazole-containing angiotensin II receptor blockers, but also ranitidine, metformin, and other medicines, many of which have been recalled and prone to shortage. At any stages, from drug substance synthesis throughout each product's lifetime, these impurities may evolve if an amine reacts with a nitrosating agent coexisting under appropriate conditions. Consequently, drug regulatory authorities worldwide have established stringent guidelines on nitrosamine contamination for all drug products in the market. This review encompasses various critical elements contributing to successful control measures against current and upcoming nitrosamine issues, ranging from accumulated knowledge of their toxicity concerns and potential root causes, precise risk evaluation, as well as suitable analytical techniques with sufficient sensitivity for impurity determination. With all these tools equipped, the impact of nitrosamine contamination in pharmaceuticals should be mitigated. An evaluation aid to tackle challenges in risk identification, as well as suitable industry-friendly analytical techniques to determine nitrosamines and other mutagenic impurities, are among unmet needs that will significantly simplify the risk assessment process.     

An Intercompany Perspective on Compatibility and In-use Stability Studies to Enable Administration Of Biopharmaceutical Drug Products

In-use stability and compatibility studies are often used in biotherapeutic development to assess stability and compatibility of biologic drugs with diluents and/or administration components at relevant conditions for the target route of administration (commonly intravenous, subcutaneous or intramuscular), to assure that patient safety and product efficacy are maintained during clinical use.To gain an understanding of current industry approaches for in-use stability and compatibility studies, the Formulation Workstream of the BioPhorum Development Group (BPDG), an industry-wide consortium, conducted an inter-company collaboration exercise, which included five bench-marking surveys around in-use stability and compatibility studies of biologic drugs.The results of this industry collaboration provide insights into the practicalities of these studies and how they are being used to support administration of biologics from early clinical programs to marketed products. The surveys queried topics including regulatory strategies and feedback; clinical in-use formulation, patient and site considerations; clinical blinding, masking and placebo approaches; study setup, execution and reporting; and clinical in-use stability and compatibility testing to provide a comprehensive picture of the range of common industry practices.This paper discusses the survey results and presents various approaches which can be used to guide the strategy and design of an in-use stability and compatibility program based on clinical and biomolecule needs.     

Treatment of alcohol use disorder in patients with liver disease

Alcohol contributes to more than 5% of global mortality, and causes more than half of all liver-related deaths. The Alcohol Use Disorders Identification Test (AUDIT) can be used to detect those patients with hazardous drinking and alcohol dependence who will benefit from psychosocial and pharmacological alcohol treatment. Psychosocial treatments range from brief interventions and cognitive behavioral therapy, to experimental neuropsychological treatments. Psychosocial intervention can be combined with acamprosate or naltrexone as first line pharmacological treatments. For patients with liver disease, abstinence increases survival and is therefore an important treatment goal. Acamprosate is a good choice, as it prevents relapse to drinking with a number needed to treat of 12. There are no reports indicating high risks of liver toxicity for acamprosate or naltrexone, but evidence is scarce. We recommend vigorous screening for alcohol use disorder in liver disease patients, followed by psychosocial intervention and complemented by pharmaceutical therapy.     

Hepatotoxicity reports in the FDA adverse event reporting system database: A comparison of drugs that cause injury via mitochondrial or other mechanisms

Drug-induced liver injury (DILI) is a leading reason for preclinical safety attrition and post-market drug withdrawals. Drug-induced mitochondrial toxicity has been shown to play an essential role in various forms of DILI, especially in idiosyncratic liver injury. This study examined liver injury reports submitted to the Food and Drug Administration (FDA) Adverse Event Reporting System (FAERS) for drugs associated with hepatotoxicity via mitochondrial mechanisms compared with non-mitochondrial mechanisms of toxicity. The frequency of hepatotoxicity was determined at a group level and individual drug level. A reporting odds ratio (ROR) was calculated as the measure of effect. Between the two DILI groups, reports for DILI involving mitochondrial mechanisms of toxicity had a 1.43 (95% CI 1.42–1.45; P < 0.0001) times higher odds compared to drugs associated with non-mitochondrial mechanisms of toxicity. Antineoplastic, antiviral, analgesic, antibiotic, and antimycobacterial drugs were the top five drug classes with the highest ROR values. Although the top 20 drugs with the highest ROR values included drugs with both mitochondrial and non-mitochondrial injury mechanisms, the top four drugs (ROR values > 18: benzbromarone, troglitazone, isoniazid, rifampin) were associated with mitochondrial mechanisms of toxicity. The major demographic influence for DILI risk was also examined. There was a higher mean patient age among reports for drugs that were associated with mitochondrial mechanisms of toxicity [56.1 ± 18.33 (SD)] compared to non-mitochondrial mechanisms [48 ± 19.53 (SD)] (P < 0.0001), suggesting that age may play a role in susceptibility to DILI via mitochondrial mechanisms of toxicity. Univariate logistic regression analysis showed that reports of liver injury were 2.2 (odds ratio: 2.2, 95% CI 2.12–2.26) times more likely to be associated with older patient age, as compared with reports involving patients less than 65 years of age. Compared to males, female patients were 37% less likely (odds ratio: 0.63, 95% CI 0.61–0.64) to be subjects of liver injury reports for drugs associated with mitochondrial toxicity mechanisms. Given the higher proportion of severe liver injury reports among drugs associated with mitochondrial mechanisms of toxicity, it is essential to understand if a drug causes mitochondrial toxicity during preclinical drug development when drug design alternatives, more clinically relevant animal models, and better clinical biomarkers may provide a better translation of drug-induced mitochondrial toxicity risk assessment from animals to humans. Our findings from this study align with mitochondrial mechanisms of toxicity being an important cause of DILI, and this should be further investigated in real-world studies with robust designs.     

Analysis of therapeutic targets for SARS-CoV-2 and discovery of potential drugs by computational methods

SARS-CoV-2 has caused tens of thousands of infections and more than one thousand deaths. There are currently no registered therapies for treating coronavirus infections. Because of time consuming process of new drug development, drug repositioning may be the only solution to the epidemic of sudden infectious diseases. We systematically analyzed all the proteins encoded by SARS-CoV-2 genes, compared them with proteins from other coronaviruses, predicted their structures, and built 19 structures that could be done by homology modeling. By performing target-based virtual ligand screening, a total of 21 targets (including two human targets) were screened against compound libraries including ZINC drug database and our own database of natural products. Structure and screening results of important targets such as 3-chymotrypsin-like protease (3CLpro), Spike, RNA-dependent RNA polymerase (RdRp), and papain like protease (PLpro) were discussed in detail. In addition, a database of 78 commonly used anti-viral drugs including those currently on the market and undergoing clinical trials for SARS-CoV-2 was constructed. Possible targets of these compounds and potential drugs acting on a certain target were predicted. This study will provide new lead compounds and targets for further in vitro and in vivo studies of SARS-CoV-2, new insights for those drugs currently ongoing clinical studies, and also possible new strategies for drug repositioning to treat SARS-CoV-2 infections.     

Evolution of blood–brain barrier in brain diseases and related systemic nanoscale brain-targeting drug delivery strategies

Blood–brain barrier (BBB) strictly controls matter exchange between blood and brain, and severely limits brain penetration of systemically administered drugs, resulting in ineffective drug therapy of brain diseases. However, during the onset and progression of brain diseases, BBB alterations evolve inevitably. In this review, we focus on nanoscale brain-targeting drug delivery strategies designed based on BBB evolutions and related applications in various brain diseases including Alzheimer's disease, Parkinson's disease, epilepsy, stroke, traumatic brain injury and brain tumor. The advances on optimization of small molecules for BBB crossing and non-systemic administration routes (e.g., intranasal treatment) for BBB bypassing are not included in this review.     

Impact of molecular weight on the mechanism of cellular uptake of polyethylene glycols (PEGs) with particular reference to P-glycoprotein

Polyethylene glycols (PEGs) in general use are polydisperse molecules with molecular weight (MW) distributed around an average value applied in their designation e.g., PEG 4000. Previous research has shown that PEGs can act as P-glycoprotein (P-gp) inhibitors with the potential to affect the absorption and efflux of concomitantly administered drugs. However, questions related to the mechanism of cellular uptake of PEGs and the exact role played by P-gp has not been addressed. In this study, we examined the mechanism of uptake of PEGs by MDCK-mock cells, in particular, the effect of MW and interaction with P-gp by MDCK-hMDR1 and A549 cells. The results show that: (a) the uptake of PEGs by MDCK-hMDR1 cells is enhanced by P-gp inhibitors; (b) PEGs stimulate P-gp ATPase activity but to a much lesser extent than verapamil; and (c) uptake of PEGs of low MW (<2000 Da) occurs by passive diffusion whereas uptake of PEGs of high MW (>5000 Da) occurs by a combination of passive diffusion and caveolae-mediated endocytosis. These findings suggest that PEGs can engage in P-gp-based drug interactions which we believe should be taken into account when using PEGs as excipients and in PEGylated drugs and drug delivery systems.     

Bile Duct Obstruction Leads to Increased Intestinal Expression of Breast Cancer Resistance Protein With Reduced Gastrointestinal Absorption of Imatinib

Liver dysfunction reduces systemic clearance of drugs that are primarily eliminated by the liver. However, liver dysfunction can cause a reduction in the plasma concentration profiles of certain drugs, including several tyrosine kinase inhibitors, after oral administration. The aim of the present study was to clarify the reduction in oral absorption of a tyrosine kinase inhibitor, imatinib, and the mechanisms of action involved under conditions of hepatic dysfunction, focusing on intestinal transporters. The maximum plasma concentration of imatinib after oral administration in mice subjected to bile duct ligation (BDL) was lower than that in sham-operated mice, whereas the plasma concentration profile after intravenous administration was essentially unaffected by BDL. The change in maximum plasma concentration was compatible with a reduction in small intestinal permeability of imatinib observed in the in situ closed loop. Gene expression of abcg2 was increased in BDL mice compared with that in sham-operated mice. Expression of breast cancer resistance protein and P-glycoprotein in the small intestinal brush border membrane fraction from BDL mice was also increased compared with that in sham-operated mice. In summary, the intestinal absorption and permeability of imatinib was decreased in BDL mice, and this may be attributed to the up-regulation of the efflux transporter(s).     

Quality of dorzolamide hydrochloride and timolol maleate containing eye drops distributed online

Patient safety risks associated with the online purchase of medications, especially in case of ophthalmic preparations, are significant. Our study aimed to carry out quality assessment of dorzolamide hydrochloride (DZA) and timolol maleate (TIM) eye drops preserved with benzalkonium chloride (BAC) via online test purchases.Three samples were purchased online, while control preparations were acquired through authorized national drug supply chain. Our method was based on the International Pharmaceutical Federation (FIP) Inspection Checklist and integrated the evaluation of packaging and labelling. Sterility was established according to the European Pharmacopoeia (Ph. Eur.), while qualitative and quantitative quality was assessed with high-performance liquid chromatographic (HPLC) analysis.Several signs of falsification were recognized upon visual inspection of the online samples. All the products were clear, colourless, slightly viscous solutions. They were free from visible contaminants. The samples were sterile as no evidence of microbial growth was found. A quick and inexpensive HPLC analysis, optimized by the authors showed that active ingredients and the preservative deviated significantly (p < 0,05) with more than 10% from the values stated on the labels for at least one component (DZA: 99.3–113.1%, TIM: 112.8–139.2%, BAC: 82.4–97.7%).Development of comprehensive and reliable quality assessment methods are vital to increase public safety of pharmaceutical products sold online. A complex approach, integrating visual inspection, labelling assessment, microbiological analysis coupled with qualitative and quantitative methods provide a most reliable method. Due to its limited feasibility and cost-effectiveness, raising public awareness and limiting illegal online sellers should be the primary approaches to protect patients from substandard and falsified medicinal products sold via the internet. Particularly important for health professionals to understand this market and its public health concern, and to raise patient awareness of the risks associated with uncontrolled online purchase of medication.     

Cyrene™ as an Alternative Sustainable Solvent for the Preparation of Poly(lactic-co-glycolic acid) Nanoparticles

Toxic and environmental harmful organic solvents are widely applied to prepare poly(lactic-co-glycolic acid) (PLGA)-based nanoparticles (NP) in standard preparation methods. Alternative non-toxic solvents suffer from disadvantages like high viscosity and plasticizing effects. To overcome these hurdles, Cyrene? as a new sustainable, non-toxic and low viscous solvent was used to formulate PLGA NPs. A new preparation method was developed and optimized. Small sized blank NPs around 220 nm with a narrow size distribution and highly negative charge (<?23 mV) were obtained. To test the application for drug delivery, the lipophilic model drug atorvastatin was encapsulated in high drug loads with comparable physicochemical characteristics as the blank NPs, and a total drug release within 24 h. No changes of the crystallinity or plasticizing effects could be observed. Highly purified NPs were obtained with a residual Cyrene? content <2.5%. Finally, the biocompatibility of Cyrene? itself and of the NPs formed in the presence of Cyrene? was demonstrated in a hen's egg test. Conclusively, the use of Cyrene? as solvent offers a simple, fast and non-toxic procedure for preparation of PLGA NPs as drug delivery systems circumventing the downsides of standard methods.     

Delivery strategies for macromolecular drugs in cancer therapy

With the development of biotherapy, biomacromolecular drugs have gained tremendous attention recently, especially in drug development field due to the sophisticated functions in vivo. Over the past few years, a motley variety of drug delivery strategies have been developed for biomacromolecular drugs to overcome the difficulties in the druggability, e.g., the instability and easily restricted by physiologic barriers. The application of novel delivery systems to deliver biomacromolecular drugs can usually prolong the half-life, increase the bioavailability, or improve patient compliance, which greatly improves the efficacy and potentiality for clinical use of biomacromolecular drugs. In this review, recent studies regarding the drug delivery strategies for macromolecular drugs in cancer therapy are summarized, mainly drawing on the development over the last five years.     

Recent developments in the medicinal chemistry of single boron atom-containing compounds

Various boron-containing drugs have been approved for clinical use over the past two decades, and more are currently in clinical trials. The increasing interest in boron-containing compounds is due to their unique binding properties to biological targets; for example, boron substitution can be used to modulate biological activity, pharmacokinetic properties, and drug resistance. In this perspective, we aim to comprehensively review the current status of boron compounds in drug discovery, focusing especially on progress from 2015 to December 2020. We classify these compounds into groups showing anticancer, antibacterial, antiviral, antiparasitic and other activities, and discuss the biological targets associated with each activity, as well as potential future developments.