Impact of Precipitation of Antibody Therapeutics After Subcutaneous Injection on Pharmacokinetics and Immunogenicity

Antibody therapeutics with poor solubility in the subcutaneous matrix may carry unintended risks when administered to patients. The objective of this work was to estimate the risk of antibodies that precipitate in vitro at neutral pH by determining the impact of poor solubility on distribution of the drug from the injection site as well as immunogenicity in vivo. Using fluorescence imaging in a mouse model, we show that one such precipitation-prone antibody is retained at the injection site in the subcutaneous space longer than a control antibody. In addition, we demonstrate that retention at the injection site through aggregation is concentration-dependent and leads to macrophage association and germinal center localization. Although there was delayed disposition of the aggregated antibody to draining lymph nodes, no overall impact on the immune response in lymph nodes, systemic exposure of the antibody, or enhancement of the anti-drug antibody response was evident. Unexpectedly, retention of the precipitated antibody in the subcutaneous space delayed the onset of the immune response and led to an immune suppressive response. Thus, we conclude that precipitation due to poor solubility of high doses of antibody formulations delivered subcutaneously may not be of special concern in terms of exposure or immunogenicity.     

Extended Characterization and Impact of Visible Fatty Acid Particles - A Case Study With a mAb Product

In recent years, there has been increased scrutiny on the presence and formation of product-related particles in biopharmaceutical formulations. These types of particles, originating from the degradation of the active pharmaceutical ingredient or the excipients, can be challenging to identify and characterize due to their fragility. Additionally, the mechanisms of their formation as well as the impact of their presence on drug product safety can be complicated to elucidate. In this work, a case study is presented in which multiple batches of one formulated monoclonal antibody (mAb-A) were analyzed at different batch ages to better understand the formation of visible particles resulting from degradation of the surfactant polysorbate 20. The particle identity was determined by Raman spectroscopy as free fatty acid (FFA) and the particle composition over time was monitored by mass spectrometry. Further experimental work includes the counts and morphologies of subvisible particles by flow imaging microscopy. Finally, we evaluated the consequences of saline and human plasma exposure to the visible particles to better understand their fate upon dilution and/or administration which is routinely performed in the clinical setting. The experiments performed in this work can be used to support risk assessments of visible product-related particles.     

An Approach to Bioactivity Assessment for Critical Quality Attribute Identification Based on Antibody-Antigen Complex Structure

Identification of critical quality attributes (CQAs) is an important step for development of biopharmaceuticals with intended performance. An accurate CQA assessment is needed to ensure product quality and focusing on development efforts where control is needed. The assignment of criticality is based on safety and efficacy. Efficacy is related to PK and bioactivity. Here, we developed a novel approach based on antibody-antigen complex structure and modeling as a complementary method for bioactivity assessment. To validate this approach, common product related quality attributes and mutagenesis data from several IgGs were assessed using available antibody-antigen complex structures, and results were compared with experimental data from bioactivity or binding affinity measurements. A stepwise evaluation scheme for structural based analysis is proposed; based on systematic assessment following the scheme, good correlation has been observed between structural analysis and experimental data. This demonstrates that such an approach can be applied as a complementary tool for bioactivity assessment. Main applications are 1) To decouple multiple attributes to achieve amino acid resolution for bioactivity assessment, 2) To assess bioactivity of attributes that cannot be experimentally generated, 3) To provide molecular mechanism for experimental observation and understand structure function relationship. Examples are provided to illustrate these applications.     

Toward Biotherapeutics Formulation Composition Engineering using Site-Identification by Ligand Competitive Saturation (SILCS)

Formulation of protein-based therapeutics employ advanced formulation and analytical technologies for screening various parameters such as buffer, pH, and excipients. At a molecular level, physico-chemical properties of a protein formulation depend on self-interaction between protein molecules, protein-solvent and protein-excipient interactions. This work describes a novel in silico approach, SILCS-Biologics, for structure-based modeling of protein formulations. SILCS Biologics is based on the Site-Identification by Ligand Competitive Saturation (SILCS) technology and enables modeling of interactions among different components of a formulation at an atomistic level while accounting for protein flexibility. It predicts potential hotspot regions on the protein surface for protein-protein and protein-excipient interactions. Here we apply SILCS-Biologics on a Fab domain of a monoclonal antibody (mAbN) to model Fab-Fab interactions and interactions with three amino acid excipients, namely, arginine HCl, proline and lysine HCl. Experiments on 100 mg/ml formulations of mAbN showed that arginine increased, lysine reduced, and proline did not impact viscosity. We use SILCS-Biologics modeling to explore a structure-based hypothesis for the viscosity modulating effect of these excipients. Current efforts are aimed at further validation of this novel computational framework and expanding the scope to model full mAb and other protein therapeutics.     

Forced Degradation of Monoclonal Antibodies After Compounding: Impact on Routine Hospital Quality Control

Compounded therapeutic mAbs used in a hospital require quality control (QC). In our hospital, analytical QC process intended to mAbs identification and quantification is based on flow injection analysis associated with second-derivative UV spectroscopy and matching method algorithm. We studied the influence of degraded mAbs after compounding on this validated QC. Three forced stress conditions including mechanical, thermal, and freeze-thawing stresses were studied to yield degraded mAbs from 2 model compounds, that is, bevacizumab (IgG1) and nivolumab (IgG4). Different degraded mAbs were generated and were analyzed in terms of turbidity, the percentage of aggregation, size distribution, and changes in tertiary structure. Stresses showed to be mAb-dependent in terms of aggregation. Tertiary structural changes were observed in most of the stressed samples by principal component analysis of the UV second-derivative data. The structural and physicochemical modifications conducted to mismatch depending on the nature of the stress. The mismatch ranged from 17% to 72% for the mAbs, except for freeze-thawed bevacizumab for which a perfect match (100%) was reached. The quantification with an unfulfilled relative error of the concentration (i.e., > ±15%) was detected only for mechanically stressed mAbs. In conclusion, the study revealed that the influence of the mAbs and the type of stress impact on the QC of compounded mAbs.     

An Integrated Analysis of Solid Form Change Impact on Solubility and Permeability: Case Study of Oral Exposure in Rats of an RAR Related Orphan Receptor C Inhibitor

It is well acknowledged that the oral absorption of a drug can be influenced by its solubility, which is usually associated with its solid form properties. G1032 is a retinoic acid–related orphan receptor inverse agonist. Crystalline solid (form A) was identified with an aqueous solubility of 130 μg/mL. This form was used in an oral dose escalation study in rodents up to 300 mg/kg and achieved good exposures. Later on, a more stable crystalline hydrate (form B) was identified and the aqueous solubility was reduced to 55 μg/mL. A modeling exercise suggested that this solubility change would cause a 2-fold decrease in exposure at tested doses; however, the actual reduction was far larger than the model predicted. At high dose, exposure was found to be reduced by almost 10-fold. A parameter sensitivity analysis suggested that such a drop in exposure could be associated with permeability reduction as well. More in vitro permeability experiments were performed, indicating G1032 was an efflux transporter substrate. This finding was integrated into the modeling and the design for in vivo studies. Data obtained from those studies allowed us to better understand the causes of the higher-than-expected exposure change and enabled decision-making.     

Continuous Twin Screw Wet Granulation and Drying—Control Strategy for Drug Product Manufacturing

The use of continuous manufacturing has been increasing within the pharmaceutical industry over the last few years. Continuous direct compression has been the focus of publications on the topic to date. The use of wet granulation can improve segregation resistance, uniformity, enhance density, and flow properties for improved tabletability, or improve stability of products that cannot be manufactured by using a direction compression process. This article focuses on development of appropriate control strategies for continuous wet granulation (especially twin screw wet granulation) through equipment design, material properties and manufacturing process along with areas where additional understanding is required. The article also discusses the use of process analytical technologies as part of the control and automation approach to ensure a higher assurance of product quality. Increased understanding of continuous wet granulation should result in increased utilization of the technique, thereby allowing for an increase in diversity of products manufactured by continuous manufacturing and the benefits that comes with a more complex process such as wet granulation compared with direct compression process.     

Variance Between Different Light Obscuration and Flow Imaging Microscopy Instruments and the Impact of Instrument Calibration

Subvisible particles (SVPs) are an obligatory critical quality attribute of the product, and yet, they are found in all biopharmaceutical products intended for infusion or injection. Light obscuration (LO) is the primary pharmacopeial method used to quantify SVPs. However, the method may not be equally sensitive toward all particles that can possibly occur. Calibration of LO instruments is usually performed using polystyrene beads suspended in water. In this study, the dependence of the sizing accuracy of LO analysis was evaluated by using a calibration suspension of lower refractive index beads made of silica suspended in sucrose solution. It was demonstrated that the sizing accuracy was strongly dependent on the reference material’s properties used for calibration. It was also demonstrated that flow imaging microscopy suffered from the same artifact, albeit to a smaller extent. We further tested different LO sensors and instruments. Interestingly, our results show that the sizing accuracy varied from instrument to instrument, strongly depending on the properties of the sensor.To summarize, sizing and counting accuracies were dependent on the material used for calibration and its optical properties as well as the calibration curve, the sensor, and the instrument supplier. Closer match of optical properties between calibration system and test system seems to improve the sensitivity of the measurement. The results of this study raise the following major practical implications: (1) LO and flow imaging microscopy are not truly orthogonal analytical methods, (2) while matching optimal properties of material used for calibration and test items increased sensitivity, this is of poor practical applicability given that analytes contain multiple particles, and (3) setting product-specific limits for SVPs require special considerations with regard to the data sets used.     

Evaluation of a 3D Human Artificial Lymph Node as Test Model for the Assessment of Immunogenicity of Protein Aggregates

The immunogenicity of protein aggregates has been investigated in numerous studies. Nevertheless, it is still unknown which kind of protein aggregates enhance immunogenicity the most. The ability of the currently used in vitro and in vivo systems regarding their predictability of immunogenicity in humans is often questionable, and results are partially contradictive. In this study, we used a 2D in vitro assay and a complex 3D human artificial lymph node model to predict the immunogenicity of protein aggregates of bevacizumab and adalimumab. The monoclonal antibodies were exposed to different stress conditions such as light, heat, and mechanical stress to trigger the formation of protein aggregates and particles, and samples were analyzed thoroughly. Cells and culture supernatants were harvested and analyzed for dendritic cell marker and cytokines. Our study in the artificial lymph node model revealed that bevacizumab after exposure to heat triggered a TH1- and proinflammatory immune response, whereas no trend of immune responses was seen for adalimumab after exposure to different stress conditions. The human artificial lymph node model represents a new test model for testing the immunogenicity of protein aggregates combining the relevance of a 3D human system with the rather easy handling of an in vitro setup.     

Effects of valproate,an HDAC inhibitor,on the expression of folate carriers and folate metabolism-related genes in the placenta of rats

Valproate (VPA), an antiepileptic drug, is known to inhibit histone deacetylases (HDACs). Exposure to VPA during pregnancy increases several fetal risks. The maintenance of folate level during pregnancy is essential for adequate fetal development, and the placenta plays a critical role in supplying nutrients to the fetus. The aim of this study was to elucidate the effects of VPA on the gene expression of folate carriers and metabolizing enzymes in the rat placenta at both mid and late gestation periods. Pregnant rats were orally administered VPA on a single day or 4 days (repeated administration). Gene expression of folate carriers (Folr1, Slc19a1, Slc46a1) and metabolizing enzymes (Cth, Mtr, Mtrr, Mthfr, Dhfr) was assessed in the placenta on gestational day (GD) 13 or GD20. In the control rats, the expression of Folr1, Slc46a1, Cth, and Mthfr tended to be upregulated, whereas that of Mtrr and Dhfr was downregulated during gestation; the expression of Slc19a1 and Mtr did not change. Repeated VPA administration reduced the placental expression of Folr1and Mtr on GD20 and increased the expression of Dhfr on GD13 compared with the control. These findings indicate that administration of VPA alters the placental gene expression of folate carriers and metabolism-related enzymes.     

4-Hydroxynonenal is An Oxidative Degradation Product of Polysorbate 80

IntroductionPolysorbates (PS) are used in biopharmaceuticals to stabilize therapeutic proteins. Oxidative degradation of (poly)unsaturated fatty acids (PUFAs) contained in PS was shown to lead to α,β-unsaturated carbonyls.AimThe n-6-PUFA linoleic acid accounts for up to 18% of all FAs contained in multi-compendial grade PS80. 4-Hydroxynonenal (HNE) is highly reactive towards nucleophilic amino acids, potentially leading to covalent protein modifications. This study tests whether HNE may be a pharmaceutically relevant PS80 peroxidation product.MethodsSince HNE was not directly detectable in the PS80 matrix by UV and MS, a new quantification method was established. After derivatization with 2,4-dinitrophenyl hydrazine (DNPH) and extraction of the formed hydrazone with a salting-out assisted liquid-liquid extraction, the HNE-DNPH adduct was analyzed by multiple reaction monitoring. Kinetic oxidation studies were conducted incubating PS80 in presence and absence of the antioxidant butylhydroxytoluene (BHT).ResultsHNE was confirmed as PS80 degradant in oxidatively stressed samples. BHT was shown to prevent its formation.ConclusionHNE is a detectable PS80 degradation product raising questions about the potential impact on critical quality attributes of biopharmaceuticals formulated with PS80. Addition of BHT prevented HNE formation under oxidative stress. Consequently, BHT might be a valuable additive in PS used in biopharmaceuticals.     

Contribution of Intravenous Administration Components to Subvisible and Submicron Particles Present in Administered Drug Product

Particulate matter present in drug products intended for parenteral administration to patients is typically monitored and controlled in the finished drug product to minimize potential risks to patients. In contrast to particulates found in drug products, the current study evaluated particulates representative of materials and operations typically used in the dose preparation and administration of drug products. A comprehensive assessment of intrinsic and extrinsic sources of subvisible and submicron particulates arising from materials associated with subcutaneous and intravenous dose preparation and administration was conducted. In particular, particles arising from disposable syringes, commercial sterile diluents, and intravenous supplies were quantitated using established methods for subvisible (light obscuration, flow imaging) and submicron particles (resistive pulse sensing). Each of these sources contributed varying amounts of particulates; therefore, owing to sources from materials required for administration, it is inadequate to assume that the total particulate load delivered to patients arises solely from the drug product. Careful consideration of the administration method and supplies used can improve the predictability of particulate levels present in dose preparations or administration volumes.     

Immunogenicity risk assessment of synthetic peptide drugs and their impurities

1. Download : Download high-res image (276KB)
2. Download : Download full-size image

     

Impact of obese levels on the hepatic expression of nuclear receptors and drug-metabolizing enzymes in adult and offspring mice

The prevalence of obesity-associated conditions raises new challenges in clinical medication. Although altered expression of drug-metabolizing enzymes (DMEs) has been shown in obesity, the impacts of obese levels (overweight, obesity, and severe obesity) on the expression of DMEs have not been elucidated. Especially, limited information is available on whether parental obese levels affect ontogenic expression of DMEs in children. Here, a high-fat diet (HFD) and three feeding durations were used to mimic different obese levels in C57BL/6 mice. The hepatic expression of five nuclear receptors (NRs) and nine DMEs was examined. In general, a trend of induced expression of NRs and DMEs (except for Cyp2c29 and 3a11) was observed in HFD groups compared to low-fat diet (LFD) groups. Differential effects of HFD on the hepatic expression of DMEs were found in adult mice at different obese levels. Family-based dietary style of an HFD altered the ontogenic expression of DMEs in the offspring older than 15 days. Furthermore, obese levels of parental mice affected the hepatic expression of DMEs in offspring. Overall, the results indicate that obese levels affected expression of the DMEs in adult individuals and that of their children. Drug dosage might need to be optimized based on the obese levels.     

Impact of molecular weight on the mechanism of cellular uptake of polyethylene glycols (PEGs) with particular reference to P-glycoprotein

Polyethylene glycols (PEGs) in general use are polydisperse molecules with molecular weight (MW) distributed around an average value applied in their designation e.g., PEG 4000. Previous research has shown that PEGs can act as P-glycoprotein (P-gp) inhibitors with the potential to affect the absorption and efflux of concomitantly administered drugs. However, questions related to the mechanism of cellular uptake of PEGs and the exact role played by P-gp has not been addressed. In this study, we examined the mechanism of uptake of PEGs by MDCK-mock cells, in particular, the effect of MW and interaction with P-gp by MDCK-hMDR1 and A549 cells. The results show that: (a) the uptake of PEGs by MDCK-hMDR1 cells is enhanced by P-gp inhibitors; (b) PEGs stimulate P-gp ATPase activity but to a much lesser extent than verapamil; and (c) uptake of PEGs of low MW (<2000 Da) occurs by passive diffusion whereas uptake of PEGs of high MW (>5000 Da) occurs by a combination of passive diffusion and caveolae-mediated endocytosis. These findings suggest that PEGs can engage in P-gp-based drug interactions which we believe should be taken into account when using PEGs as excipients and in PEGylated drugs and drug delivery systems.     

Effects of IL-22 on cardiovascular diseases

Interleukin-22 (IL-22), which belongs to the IL-10 family, is an alpha helix cytokine specifically produced by many lymphocytes, such as Th1, Th17, Th22, ILCs, CD4+ and CD8+ T cells. In recent years, more and more studies have demonstrated that IL-22 has an interesting relationship with various cardiovascular diseases, including myocarditis, myocardial infarction, atherosclerosis, and other cardiovascular diseases, and IL-22 signal may play a dual role in cardiovascular diseases. Here, we summarize the recent progress on the source, function, regulation of IL-22 and the effects of IL-22 signal in cardiovascular diseases. The study of IL-22 will suggest more specific strategies to maneuver these functions for the effective treatment of cardiovascular diseases and future clinical treatment.     

Effects of steric hindrance and electron density of ester prodrugs on controlling the metabolic activation by human carboxylesterase

Carboxylesterase (CES) plays an important role in the hydrolysis metabolism of ester–type drugs and prodrugs. In this study, we investigated the change in the hydrolysis rate of hCE1 by focusing on the steric hindrance of the ester structure and the electron density. For 26 kinds of synthesized indomethacin prodrugs, the hydrolytic rate was measured in the presence of human liver microsomes (HLM), human small intestine microsomes (HIM), hCE1 and hCE2. The synthesized prodrugs were classified into three types: an alkyl ester type that is specifically metabolized by hCE1, a phenyl ester type that is more easily metabolized by hCE1 than by hCE2, and a carbonate ester type that is easily metabolized by both hCE1 and hCE2. The hydrolytic rate of 1-methylpentyl (hexan–2–yl) ester was 10–times lower than that of 4–methylpentyl ester in hCE1 solution. hCE2 was susceptible to electron density of the substrate, and there was a difference in the hydrolysis rate of up to 3.5–times between p-bromophenyl ester and p-acetylphenyl ester. By changing the steric hindrance and electron density of the alkoxy group, the factors that change the hydrolysis rate by CES were elucidated.     

The biology,function, and applications of exosomes in cancer

Exosomes are cell-derived nanovesicles with diameters from 30 to 150 nm, released upon fusion of multivesicular bodies with the cell surface. They can transport nucleic acids, proteins, and lipids for intercellular communication and activate signaling pathways in target cells. In cancers, exosomes may participate in growth and metastasis of tumors by regulating the immune response, blocking the epithelial–mesenchymal transition, and promoting angiogenesis. They are also involved in the development of resistance to chemotherapeutic drugs. Exosomes in liquid biopsies can be used as non-invasive biomarkers for early detection and diagnosis of cancers. Because of their amphipathic structure, exosomes are natural drug delivery vehicles for cancer therapy.