Microstructure and Mechanical Properties of TiN–TiB2–hBN Composites Fabricated by Reactive Hot Pressing Using TiN–B Mixture

In this study, TiN–TiB₂–hBN composite ceramics were prepared via reactive hot pressing using TiN and amorphous B powders as raw materials. Different sintering temperatures and composition ratios were studied. The results show that the 70 vol% TiN–17.6 vol% TiB₂–12.4 vol% hBN ceramic composites obtained ideal comprehensive properties at 1600 °C. The relative density, Vickers hardness, bending strength, and fracture toughness were 99%, 11 GPa, 521 MPa, and 4.22 MPa·m^1/2, respectively. Densification was promoted by the highly active reaction product TiB₂, and the structural defects formed in the grains. Meanwhile, the good interfacial bonding between TiN and TiB₂ grains and the uniform dispersion of ultrafine hBN in the matrix contributed to the excellent bending strength. Moreover, the toughening mechanism of crack deflection and grain pull-out improved the fracture toughness.     

Pulse Plasma Sintering of NiAl-Al2O3 Composite Powder Produced by Mechanical Alloying with Contribution of Nanometric Al2O3 Powder

NiAl-Al₂O₃ composites, fabricated from the prepared composite powders by mechanical alloying and then consolidated by pulse plasma sintering, were presented. The use of nanometric alumina powder for reinforcement of a synthetized intermetallic matrix was the innovative concept of this work. Moreover, this is the first reported attempt to use the Pulse Plasma Sintering (PPS) method to consolidate composite powder with the contribution of nanometric alumina powder. The composite powders consisting of the intermetallic phase NiAl and Al₂O₃ were prepared by mechanical alloying from powder mixtures containing Ni-50at.%Al with the contribution of 10 wt.% or 20 wt.% nanometric aluminum oxide. A nanocrystalline NiAl matrix was formed, with uniformly distributed Al₂O₃ inclusions as reinforcement. The PPS method successfully consolidated NiAl-Al₂O₃ composite powders with limited grain growth in the NiAl matrix. The appropriate sintering temperature for composite powder was selected based on analysis of the grain growth and hardness of Al₂O₃ subjected to PPS consolidation at various temperatures. As a result of these tests, sintering of the NiAl-Al₂O₃ powders was carried out at temperatures of 1200 °C, 1300 °C, and 1400 °C. The microstructure and properties of the initial powders, composite powders, and consolidated bulk composite materials were characterized by SEM, EDS, XRD, density, and hardness measurements. The hardness of the ultrafine-grained NiAl-Al₂O₃ composites obtained via PPS depends on the Al₂O₃ content in the composite, as well as the sintering temperature applied. The highest values of the hardness of the composites were obtained after sintering at the lowest temperature (1200 °C), reaching 7.2 ± 0.29 GPa and 8.4 ± 0.07 GPa for 10 wt.% Al₂O₃ and 20 wt.% Al₂O₃, respectively, and exceeding the hardness values reported in the literature. From a technological point of view, the possibility to use sintering temperatures as low as 1200 °C is crucial for the production of fully dense, ultrafine-grained composites with high hardness.     

Al2O3-Cu-Ni Composites Manufactured via Uniaxial Pressing: Microstructure,Magnetic, and Mechanical Properties

This study’s main goal was to obtain and characterize Al₂O₃-Cu-Ni composites with different metallic phase content. The study analyzed the three series of samples differing in the metallic phase 5, 10, 15 vol.% volume contents. An identical volume share of the metallic components in the metallic phase was used. Ceramic–metal composites were formed using uniaxial pressing and sintered at a temperature of 1400 °C. The microstructural investigation of the Al₂O₃-Cu-Ni composite and its properties involved scanning electron microscopes observations and X-ray diffraction. The size of the metallic phase in the ceramic matrix was performed using a stereological analysis. Microhardness analysis with fracture toughness measures was applied to estimate the mechanical properties of the prepared materials. Additionally, magnetic measurements were carried out, and the saturation magnetization was determined on the obtained magnetic hysteresis loops. The prepared samples, regardless of the content of the metallic phase in each series, were characterized by a density exceeding 95% of the theoretical density. The magnetic measurements exhibited that the fabricated composites had ferromagnetic properties due to nickel and nickel-rich phases. The hardness of the samples containing 5, 10, 15 vol.% metallic phases decreased with an increase in the metallic phase content, equal to 17.60 ± 0.96 GPa, 15.40 ± 0.81 GPa, 12.6 ± 0.36 GPa, respectively.     

Sol-Gel Synthesis and Antioxidant Properties of Yttrium Oxide Nanocrystallites Incorporating P-123

Yttrium oxide (Y₂O₃) nanocrystallites were synthesized by mean of a sol-gel method using two different precursors. Raw materials used were yttrium nitrate and yttrium chloride, in methanol. In order to promote oxygen vacancies, P-123 poloxamer was incorporated. Synthesized systems were heat-treated at temperatures from 700 °C to 900 °C. Systems at 900 °C were prepared in the presence and absence of P-123 using different molar ratios (P-123:Y = 1:1 and 2:1). Fourier transform infrared spectroscopy (FTIR) results revealed a characteristic absorption band of Y–O vibrations typical of Y₂O₃ matrix. The structural phase was analyzed by X-ray diffraction (XRD), showing the characteristic cubic phase in all systems. The diffraction peak that presented the major intensity corresponded to the sample prepared from yttrium chloride incorporating P-123 in a molar ratio of P-123:Y = 2:1 at 900 °C. Crystallites sizes were determined by Scherrer equation as between 21 nm and 32 nm. Antioxidant properties were estimated by 2,2-diphenyl-1-picrylhydrazyl (DPPH•) assays; the results are discussed.     

Effects of Annealing and Thickness of Co60Fe20Yb20 Nanofilms on Their Structure,Magnetic Properties,Electrical Efficiency,and Nanomechanical Characteristics

X-ray diffraction (XRD) analysis showed that metal oxide peaks appear at 2θ = 47.7°, 54.5°, and 56.3°, corresponding to Yb₂O₃ (440), Co₂O₃ (422), and Co₂O₃ (511). It was found that oxide formation plays an important role in magnetic, electrical, and surface energy. For magnetic and electrical measurements, the highest alternating current magnetic susceptibility (χ_ac) and the lowest resistivity (×10⁻² Ω·cm) were 0.213 and 0.42, respectively, and at 50 nm, it annealed at 300 °C due to weak oxide formation. For mechanical measurement, the highest value of hardness was 15.93 GPa at 200 °C in a 50 nm thick film. When the thickness increased from 10 to 50 nm, the hardness and Young’s modulus of the Co₆₀Fe₂₀Yb₂₀ film also showed a saturation trend. After annealing at 300 °C, Co₆₀Fe₂₀Yb₂₀ films of 40 nm thickness showed the highest surface energy. Higher surface energy indicated stronger adhesion, allowing for the formation of multilayer thin films. The optimal condition was found to be 50 nm with annealing at 300 °C due to high χ_ac, strong adhesion, high nano-mechanical properties, and low resistivity.     

Preparation and Properties of (YCa)(TiMn)O3?δ Ceramics Interconnect of Solid Oxide Fuel Cells

(YCa)(TiMn)O_3–δ ceramics prepared using a reaction-sintering process were investigated. Without any calcination involved, the mixture of raw materials was pressed and sintered directly. Y₂Ti₂O₇ instead of YTiO₃ formed when a mixture of Y₂O₃ and TiO₂ with Y/Ti ratio 1/1 were sintered in air. Y₂Ti₂O₇, YTiO_2.085 and some unknown phases were detected in Y_0.6Ca_0.4Ti_0.6Mn_0.4O_3–δ. Monophasic Y_0.6Ca_0.4Ti_0.4Mn_0.6O_3–δ ceramics were obtained after 1400–1500 °C sintering. Dense Y_0.6Ca_0.4Ti_0.4Mn_0.6O_3–δ with a density 4.69 g/cm³ was observed after 1500 °C/4 h sintering. Log σ for Y_0.6Ca_0.4Ti_0.6Mn_0.4O_3–δ increased from –3.73 Scm^–1 at 350 °C to –2.14 Scm^–1 at 700 °C. Log σ for Y_0.6Ca_0.4Ti_0.4Mn_0.6O_3–δ increased from –2.1 Scm^–1 at 350 °C to –1.36 Scm^–1 at 700 °C. Increasing Mn content decreased activation energy E_a and increased electrical conductivity. Reaction-sintering process is proved to be a simple and effective method to obtain (YCa)(TiMn)O_3–δ ceramics for interconnects in solid oxide fuel cells.     

Influence of N2 Partial Pressure on Structure and Mechanical Properties of TiAlN/Al2O3 Multilayers

TiAlN/Al₂O₃ multilayers with different Ar/N₂ ratios were deposited on Sisubstrates in different N₂ partial pressure by magnetron sputtering. The crystalline and multilayer structures of the multilayers were determined by a glancing angle X-ray diffractometer (XRD). A nanoindenter was used to evaluate the hardness, the elastic modulus and scratch scan of the multilayers. The chemical bonding was investigated by a X-ray Photoelectron Spectroscopy (XPS). The maximum hardness (36.3 GPa) and elastic modulus (466 GPa) of the multilayers was obtained when Ar/N₂ ratio was 18:1. The TiAlN/Al₂O₃ multilayers were crystallized with orientation in the (111) and (311) crystallographic planes. The multilayers displayed stably plastic recovery in different Ar/N₂ ratios. The scratch scan and post scan surface profiles of TiAlN/Al₂O₃ multilayers showed the highest critical fracture load (L_c) of 53 mN for the multilayer of Ar/N₂ = 18:1. It indicated that the multilayer had better practical adhesion strength and fracture resistance.     

Some Thermomagnetic and Mechanical Properties of Amorphous Fe75Zr4Ti3Cu1B17 Ribbons

The microstructure, revealed by X-ray diffraction and transmission Mössbauer spectroscopy, magnetization versus temperature, external magnetizing field induction and mechanical hardness of the as-quenched Fe₇₅Zr₄Ti₃Cu₁B₁₇ amorphous alloy with two refractory metals (Zr, Ti) have been measured. The X-ray diffraction is consistent with the Mössbauer spectra and is characteristic of a single-phase amorphous ferromagnet. The Curie point of the alloy is about 455 K, and the peak value of the isothermal magnetic entropy change, derived from the magnetization versus external magnetizing field induction curves, equals 1.7 J·kg⁻¹·K⁻¹. The refrigerant capacity of this alloy exhibits the linear dependence on the maximum magnetizing induction (B_m) and reaches a value of 110 J·kg⁻¹ at B_m = 2 T. The average value of the instrumental hardness (HV_IT) is about 14.5 GPa and is superior to other crystalline Fe-based metallic materials measured under the same conditions. HV_IT does not change drastically, and the only statistically acceptable changes are visibly proving the single-phase character of the material.     

Elaboration of Alumina-Zirconia Composites: Role of the Zirconia Content on the Microstructure and Mechanical Properties

Alumina-zirconia (AZ) composites are attractive structural materials, which combine the high hardness and Young’s modulus of the alumina matrix with additional toughening effects, due to the zirconia dispersion. In this study, AZ composites containing different amounts of zirconia (in the range 5–20 vol %) were prepared by a wet chemical method, consisting on the surface coating of alumina powders by mixing them with zirconium salt aqueous solutions. After spray-drying, powders were calcined at 600 °C for 1 h. Green bodies were then prepared by two methods: uniaxial pressing of spray-dried granules and slip casting of slurries, obtained by re-dispersing the spray dried granulates. After pressureless sintering at 1500 °C for 1 h, the slip cast samples gave rise to fully dense materials, characterized by a quite homogeneous distribution of ZrO₂ grains in the alumina matrix. The microstructure, phase composition, tetragonal to monoclinic transformation behavior and mechanical properties were investigated and are here discussed as a function of the ZrO₂ content. The material containing 10 vol % ZrO₂ presented a relevant hardness and exhibited the maximum value of K_I0, mainly imputable to the t → m transformation at the crack tip.     

Al2O3/ZrO2/Y3Al5O12 Composites: A High-Temperature Mechanical Characterization

An Al₂O₃/5 vol%·ZrO₂/5 vol%·Y₃Al₅O₁₂ (YAG) tri-phase composite was manufactured by surface modification of an alumina powder with inorganic precursors of the second phases. The bulk materials were produced by die-pressing and pressureless sintering at 1500 °C, obtaining fully dense, homogenous samples, with ultra-fine ZrO₂ and YAG grains dispersed in a sub-micronic alumina matrix. The high temperature mechanical properties were investigated by four-point bending tests up to 1500 °C, and the grain size stability was assessed by observing the microstructural evolution of the samples heat treated up to 1700 °C. Dynamic indentation measures were performed on as-sintered and heat-treated Al₂O₃/ZrO₂/YAG samples in order to evaluate the micro-hardness and elastic modulus as a function of re-heating temperature. The high temperature bending tests highlighted a transition from brittle to plastic behavior comprised between 1350 and 1400 °C and a considerable flexural strength reduction at temperatures higher than 1400 °C; moreover, the microstructural investigations carried out on the re-heated samples showed a very limited grain growth up to 1650 °C.     

Influence of MXene (Ti3C2) Phase Addition on the Microstructure and Mechanical Properties of Silicon Nitride Ceramics

This paper discusses the influence of Ti₃C₂ (MXene) addition on silicon nitride and its impact on the microstructure and mechanical properties of the latter. Composites were prepared through powder processing and sintered using the spark plasma sintering (SPS) technic. Relative density, hardness and fracture toughness, were analyzed. The highest fracture toughness at 5.3 MPa·m^1/2 and the highest hardness at HV5 2217 were achieved for 0.7 and 2 wt.% Ti₃C₂, respectively. Moreover, the formation of the Si₂N₂O phase was observed as a result of both the MXene addition and the preservation of the α-Si₃N₄→β-Si₃N₄ phase transformation during the sintering process.     

Osteoblast-like Cell Proliferation,ALP Activity and Photocatalytic Activity on Sintered Anatase and Rutile Titanium Dioxide

This study aimed to create a biomaterial from titanium dioxide (TiO₂), which has been known to have photocatalytic and bone formation promoting effects. I expected that anatase titanium dioxide-based implants could promote bone augmentation and induce bone formation. Powdery anatase TiO₂ was compression molded and sintered at 700, 800, 900, and 1000 °C to prepare sintered compact samples. X-ray diffraction and scanning electron microscopy were used to observe the surface of these samples. Furthermore, mouse osteoblast-like cells (MC3T3-E1 cell line) were seeded on the samples sintered at different temperatures, and cell proliferation was observed to evaluate the cell proliferation of the samples. The sample sintered at 700 °C was composed of anatase TiO₂. The samples sintered at 800 °C and 900 °C were confirmed to consist of a mixture of anatase and rutile TiO₂ crystalline phases. Moreover, the sample sintered at 700 and 800 °C, which contained anatase TiO₂, showed remarkable photocatalytic activity. Those samples sintered at 1000 °C were transformed to the rutile TiO₂. The cell proliferation after 7–14-days culturing revealed that cells cultured on the 700 °C sample decreased in number immediately after initiation of culturing. The cells cultured on TiO₂ sintered at 900 °C markedly proliferated over time with an increase in the alkaline phosphatase activity, showing good MC3T3-E1 cell compatibility of the samples. The sample sintered at 1000 °C, which is rutile TiO₂, showed the highest increase.     

Effect of Current Density on the Microstructure and Mechanical Properties of 3YSZ/Al2O3 Composites by Flash Sintering

The 3YSZ/40 wt% Al₂O₃ composites were prepared by flash sintering at a low furnace temperature (700 °C). The effects of the current density on the relative density and Vickers hardness of the composites were systematically investigated. The results showed that the relative densities and Vickers hardness of the samples increased gradually with the increasing of the current densities, and the relative density was as high as 94.2%. The Vickers hardness of 11.3 GPa was obtained under a current density of 102 mA/mm². Joule heating and defects generation are suggested to be the main causes of rapid densification in flash sintering. The microstructure of the molten zone showed the formation of eutectic structures in the composite, suggesting that grain boundary overheating may have contributed to the formation of the molten zone.     

Green Synthesis of Hexagonal Hematite (α-Fe2O3) Flakes Using Pluronic F127-Gelatin Template for Adsorption and Photodegradation of Ibuprofen

Hematite (α-Fe₂O₃) with uniform hexagonal flake morphology has been successfully synthesized using a combination of gelatin as natural template with F127 via hydrothermal method. The resulting hematite was investigated as adsorbent and photocatalyst for removal of ibuprofen as pharmaceutical waste. Hexagonal flake-like hematite was obtained following calcination at 500 °C with the average size was measured at 1–3 µm. Increasing the calcination temperature to 700 °C transformed the uniform hexagonal structure into cubic shape morphology. Hematite also showed high thermal stability with increasing the calcination temperatures; however, the surface area was reduced from 47 m²/g to 9 m²/g. FTIR analysis further confirmed the formation Fe-O-Fe bonds, and the main constituent elements of Fe and O were observed in EDX analysis for all samples. α-Fe₂O₃ samples have an average adsorption capacity of 55–25.5 mg/g at 12–22% of removal efficiency when used as adsorbent for ibuprofen. The adsorption capacity was reduced as the calcination temperatures increased due to the reduction of available surface area of the hexagonal flakes after transforming into cubes. Photocatalytic degradation of ibuprofen using hematite flakes achieved 50% removal efficiency; meanwhile, combination of adsorption and photocatalytic degradation further removed 80% of ibuprofen in water/hexane mixtures.     

On the Structure and Properties of AlMgB14-TiB2 Composites Obtained from SHS Powders by Spark Plasma Sintering

AlMgB₁₄-TiB₂ composite materials were fabricated by self-propagating high-temperature synthesis (SHS) followed by spark plasma sintering of the obtained SHS products. It was found that, during the SHS, the AlMgB₁₄ phase is formed at a donor (Ti + 2B) to acceptor (Al₁₂Mg₁₇-B) mass ratio of 3:7 and 4:6, respectively. The specimen sintered from the SHS powder with the donor:acceptor mass ratio of 5:5 at a temperature of 1470 °C has a uniform skeletal structure. The average hardness of the obtained specimen is 30.1 GPa.     

Characteristics of the Structure,Mechanical, and Tribological Properties of a Mo-Mo2N Nanocomposite Coating Deposited on the Ti6Al4V Alloy by Magnetron Sputtering

Mo-Mo₂N nanocomposite coating was produced by reactive magnetron sputtering of a molybdenum target, in the atmosphere, of Ar and N₂ gases. Coating was deposited on Ti6Al4V titanium alloy. Presented are the results of analysis of the XRD crystal structure, microscopic SEM, TEM and AFM analysis, measurements of hardness, Young’s modulus, and adhesion. Coating consisted of α-Mo phase, constituting the matrix, and γ-Mo₂N reinforcing phase, which had columnar structure. The size of crystallite phases averaged 20.4 nm for the Mo phase and 14.1 nm for the Mo₂N phase. Increasing nitrogen flow rate leads to the fragmentation of the columnar grains and increased hardness from 22.3 GPa to 27.5 GPa. The resulting coating has a low Young’s modulus of 230 GPa to 240 GPa. Measurements of hardness and Young’s modulus were carried out using the nanoindentation method. Friction coefficient and tribological wear of the coatings were determined with a tribometer, using the multi-cycle oscillation method. Among tested coatings, the lowest friction coefficient was 0.3 and wear coefficient was 10 × 10⁻¹⁶ m³/N∙m. In addition, this coating has an average surface roughness of RMS < 2.4 nm, determined using AFM tests, as well as a good adhesion to the substrate. The dominant wear mechanism of the Mo-Mo₂N coatings was abrasive wear and wear by oxidation. The Mo-Mo₂N coating produced in this work is a prospective material for the elements of machines and devices operating in dry friction conditions.     

New Nitride Nanoceramics from Synthesis-Mixed Nanopowders in the Composite System Gallium Nitride GaN–Titanium Nitride TiN

Presented is a study on the preparation, via original precursor solution chemistry, of intimately mixed composite nanocrystalline powders in the system gallium nitride GaN–titanium nitride TiN, atomic ratio Ga/Ti = 1/1, which were subjected to high-pressure (7.7 GPa) and high-temperature (650, 1000, and 1200 °C) sintering with no additives. Potential equilibration toward bimetallic compounds upon mixing of the solutions of the metal dimethylamide precursors, dimeric {Ga[N(CH₃)₂]₃}₂ and monomeric Ti[N(CH₃)₂]₄, was studied with ¹H- and ¹³C{H}-NMR spectroscopy in C₆D₆ solution. The different nitridation temperatures of 800 and 950 °C afforded a pool of in situ synthesis-mixed composite nanopowders of hexagonal h-GaN and cubic c-TiN with varying average crystallite sizes. The applied sintering temperatures were either to prevent temperature-induced recrystallization (650 °C) or promote crystal growth (1000 and 1200 °C) of the initial powders with the high sintering pressure of 7.7 GPa having a detrimental effect on crystal growth. The powders and nanoceramics, both of the composites and of the individual nitrides, were characterized if applicable by powder XRD, SEM/EDX, Raman spectroscopy, Vicker’s hardness, and helium density. No evidence was found for metastable alloying of the two crystallographically different nitrides under the applied synthesis and sintering conditions, while the nitride domain segregation on the micrometer scale was observed on sintering. The Vicker’s hardness tests for many of the composite and individual nanoceramics provided values with high hardness comparable with those of the individual h-GaN and c-TiN ceramics.     

Impact of Li3BO3 Addition on Solid Electrode-Solid Electrolyte Interface in All-Solid-State Batteries

All-solid-state lithium-ion batteries raise the issue of high resistance at the interface between solid electrolyte and electrode materials that needs to be addressed. The article investigates the effect of a low-melting Li₃BO₃ additive introduced into LiCoO₂- and Li₄Ti₅O₁₂-based composite electrodes on the interface resistance with a Li₇La₃Zr₂O₁₂ solid electrolyte. According to DSC analysis, interaction in the studied mixtures with Li₃BO₃ begins at 768 and 725 °C for LiCoO₂ and Li₄Ti₅O₁₂, respectively. The resistance of half-cells with different contents of Li₃BO₃ additive after heating at 700 and 720 °C was studied by impedance spectroscopy in the temperature range of 25–340 °C. It was established that the introduction of 5 wt% Li₃BO₃ into LiCoO₂ and heat treatment at 720 °C led to the greatest decrease in the interface resistance from 260 to 40 Ω cm² at 300 °C in comparison with pure LiCoO₂. An SEM study demonstrated that the addition of the low-melting component to electrode mass gave better contact with ceramics. It was shown that an increase in the annealing temperature of unmodified cells with Li₄Ti₅O₁₂ led to a decrease in the interface resistance. It was found that the interface resistance between composite anodes and solid electrolyte had lower values compared to Li₄Ti₅O₁₂|Li₇La₃Zr₂O₁₂ half-cells. It was established that the resistance of cells with the Li₄Ti₅O₁₂/Li₃BO₃ composite anode annealed at 720 °C decreased from 97.2 (x = 0) to 7.0 kΩ cm² (x = 5 wt% Li₃BO₃) at 150 °C.     

Metastable Materials Accessed under Moderate Pressure Conditions (P ≤ 3.5 GPa) in a Piston-Cylinder Press

In this review, we describe different families of metastable materials, some of them with relevant technological applications, which can be stabilized at moderate pressures 2–3.5 GPa in a piston-cylinder press. The synthesis of some of these systems had been previously reported under higher hydrostatic pressures (6–10 GPa), but can be accessed under milder conditions in combination with reactive precursors prepared by soft-chemistry techniques. These systems include perovskites with transition metals in unusual oxidation states (e.g., RNiO₃ with Ni³⁺, R = rare earths); double perovskites such as RCu₃Mn₄O₁₂ with Jahn–Teller Cu²⁺ ions at A sites, pyrochlores derived from Tl₂Mn₂O₇ with colossal magnetoresistance, pnictide skutterudites M_xCo₄Sb₁₂ (M = La, Yb, Ce, Sr, K) with thermoelectric properties, or metal hydrides Mg₂MH_x (M = Fe, Co, Ni) and AMgH₃ (A: alkali metals) with applications in hydrogen storage. The availability of substantial amounts of sample (0.5–1.5 g) allows a complete characterization of the properties of interest, including magnetic, transport, thermoelectric properties and so on, and the structural characterization by neutron or synchrotron X-ray diffraction techniques.     

Effect of Calcination Temperature and Chemical Composition of PAN-Derived Carbon Microfibers on N2, CO2, and CH4 Adsorption

This work investigates the interplay of carbonization temperature and the chemical composition of carbon microfibers (CMFs), and their impact on the equilibration time and adsorption of three molecules (N₂, CO₂, and CH₄). PAN derived CMFs were synthesized by electrospinning and calcined at three distinct temperatures (600, 700 and 800 °C), which led to samples with different textural and chemical properties assessed by FTIR, TGA/DTA, XRD, Raman, TEM, XPS, and N₂ adsorption. We examine why samples calcined at low/moderate temperatures (600 and 700 °C) show an open hysteresis loop in nitrogen adsorption/desorption isotherms at −196.15 °C. The equilibrium time in adsorption measurements is nearly the same for these samples, despite their distinct chemical compositions. Increasing the equilibrium time did not allow for the closure of the hysteresis loop, but by rising the analysis temperature this was achieved. By means of the isosteric enthalpy of adsorption measurements and ab initio calculations, adsorbent/adsorbate interactions for CO₂, CH₄ and N₂ were found to be inversely proportional to the temperature of carbonization of the samples (CMF-600 > CMF-700 > CMF-800). The enhancement of adsorbent/adsorbate interaction at lower carbonization temperatures is directly related to the presence of nitrogen and oxygen functional groups on the surface of CMFs. Nonetheless, a higher concentration of heteroatoms also causes: (i) a reduction in the adsorption capacity of CO₂ and CH₄ and (ii) open hysteresis loops in N₂ adsorption at cryogenic temperatures. Therefore, the calcination of PAN derived microfibers at temperatures above 800 °C is recommended, which results in materials with suitable micropore volume and a low content of surface heteroatoms, leading to high CO₂ uptake while keeping acceptable selectivity with regards to CH₄ and moderate adsorption enthalpies.