Laser-Fused Biologic Vascular Graft Anastomoses

Tissue fusion using laser energy is a promising new technology that may improve the healing of anastomoses. This study evaluated the feasibility of using argon laser energy to fuse vascular tissue and biologic vascular prostheses (St. Jude Medical, Inc.) in a canine arteriovenous (A-V) fistula model. Five animals had 4-cm length, 3-mm internal diameter grafts (n;eq 10) placed bilaterally as side-to-side A-V interpositions from the femoral artery to femoral vein. One A-V graft was placed using argon laser energy with the vessel edges aligned by 6-0 polypropylene traction sutures at 3 to 4 mm intervals. The contralateral graft was sutured using running 6-0 polypropylene suture. Anastomoses were successfully fashioned in all animals except for episodes of delayed bleeding at two laser-fused segments (15 min and 2 hrs) and one segment in a suture control (6 days). The implants were removed to evaluate the integrity and healing of the anastomoses at 2 hrs, 8 days, and at 7, 9, and 11 weeks. In all instances, there was no evidence of anastomotic dehissance or enlargement. Histologic examination of the anastomoses revealed coapted vessel and prosthetic edges in laser-fused specimens and a limited foreign-body response to the permanent sutures in the suture controls. In the longer term specimens there was marked intimal proliferation at the venous anastomosis in all implants, with recent bilateral occlusions of the 7 and 11 week implants at the venous connection. We conclude that laser fusion of biologic vascular prostheses to autogenous vessel is possible with healing and no evidence of anastomotic dehissance. The technique may provide a method to limit development of anastomotic stenosis by eliminating the foreign body reaction. In addition, the canine arteriovenous model used in these experiments develops aggressive intimal lesions at the venous anastomosis within weeks and may be used to evaluate the effect of anastomotic technique on the development of this lesion.     

Argon laser-welded arteriovenous anastomoses

This study compared the healing of laser-welded and sutured canine femoral arteriovenous anastomoses. Arteriovenous fistulas 2 cm in length were created bilaterally in the femoral vessels of 10 dogs and were studied at 1 (n = 2), 2 (n = 2), 4 (n = 3), and 8 (n = 3) weeks. In each animal, one anastomosis (control) was closed with running 6-0 polypropylene sutures, and the contralateral anastomosis (experimental) was sealed with an argon laser (0.5 watt, 4 minutes of exposure, 1830 J/cm2/1 cm length of anastomosis). At removal all experimental anastomoses were patent without hematomas, aneurysms, or luminal narrowing. Histologic examination at 4 weeks revealed that laser-welded anastomoses had less inflammatory response and almost normal collagen and elastin reorientation. At 8 weeks sutured anastomoses had significant intimal hyperplasia whereas laser repairs had normal luminal architecture. Tensile strength and collagen production, measured by the synthesis of hydroxyproline and the steady-state levels of type I and type III procollagen messenger ribonucleic acids, at the anastomoses and in adjacent vein and artery specimens were similar in sutured and laser-welded repairs at 2, 4, and 8 weeks. We conclude that argon laser welding of anastomoses is an acceptable alternative to suture techniques, with the advantage of improved healing without foreign body response and possible diminished intimal hyperplasia at the anastomotic line.     

Initial human evaluation of argon laser-assisted vascular anastomoses

Forearm Brescia-Cimino arteriovenous fistulas were chosen for the initial clinical evaluation of argon laser-assisted anastomosis of human vessels. Ten patients with chronic renal failure had side-to-side radial artery/cephalic vein fistulas fused by laser. Incisions 1.2 to 1.5 cm in length were made in adjacent segments of artery and vein and were aligned for application of laser energy by four 6-0 polypropylene sutures. The sutures divided each fistula into four segments that were 5.0 to 6.5 mm long. Each segment was sealed satisfactorily in 75 to 100 seconds by use of 0.5 W, 1130 to 1520 joule/cm2 argon laser energy fluence. Seven (17.5%) of 40 bonds required an additional 7-0 biodegradable suture to close small gaps that did not fuse adequately. Serial prospective follow-up studies of the patients by physical examination and duplex scanning for periods of 12 to 20 months (15.4 +/- 2.8, n = 7) postoperatively have shown uniformly patent, compliant anastomoses with no evidence of hematomas, false aneurysms, or luminal narrowing. Histologic examination of two patent fistulas that were excised during revision procedures at 4 and 5 months postoperatively showed healing of the entire circumference of the anastomosis similar to that noted in extensive preclinical canine studies. We conclude from these preliminary results that argon laser vascular tissue fusion is possible in humans when reliable primary sealing of vascular anastomoses is achieved, and that healing occurs without aneurysmal dilatation during follow-up of up to 20 months.     

Comparison of laser vascular welding,interrupted sutures,and continuous sutures in growing vascular anastomoses

Background and Objectives: The argon laser-assisted vascular anastomosis may solve the problems of conventional sutured anastomosis, such as vascular stenosis and arrest of growth owing to a foreign-body reaction to suture material. Study Design/Materials and Methods: Twelve argon laser-assisted vascular anastomoses, seven conventional anastomoses with interrupted sutures, and five conventional anastomoses with continuous sutures were performed in 12 young mongrel dogs. Results: Five months later, the external diameter at the anastomosis had increased 70.5% in the laser group, 67.0% in the interrupted suture group, and 22.9% in the continuous suture group. Histological examination of the laser-assisted anastomoses showed almost complete healing, with no granulomatous response around the anastomotic site. In the interrupted suture group, marked scaring and foreign body reactions were observed on the vessel wall at the site of the anastomosis. The continuous suture group showed more remarkable disorientation of the vascular layer and intimal hyperplasia than the interrupted suture group. Conclusion: Vascular anastomosis using the argon laser offers advantages over the conventional procedure in growing vessels.     

A comparison of absorbable suture and argon laser welding for lateral repair of arteries.

Conventional vascular anastomoses between autogenous vessels are performed with nonabsorbable sutures. Recently, use of absorbable sutures and laser-assisted vascular anastomoses has been advocated because of their improved healing characteristics. This study compared arterial repairs with the argon laser, absorbable suture, and nonabsorbable suture for technical characteristics including additional suture and overall success rates, burst strength, and cost. Absorbable and nonabsorbable suture closures were comparable with respect to technique, but laser-assisted vascular anastomosis was technically more demanding and required almost twice as much time for completion. The argon laser successfully closed only 58.6% of the arteriotomies, and 90% of the closures required additional sutures for complete hemostasis. All sutured arteriotomies were successfully completed by use of either absorbable or nonabsorbable suture. Burst strength was similar for all groups, but was uniformly greater than 300 mm Hg for sutured repairs, whereas two of five laser-assisted closures burst below 300 mm Hg. Finally, costs for purchasing ($35,000) and operating ($300/hr.) an argon laser make laser-assisted vascular anastomosis much more expensive than sutured repair. These data suggest argon laser-assisted vascular anastomoses are more technically demanding, less successful, and more expensive than conventional sutured anastomoses when evaluated in large caliber arteries in a canine model. Absorbable suture, however, is comparable to conventional nonabsorbable sutured arterial repairs in expense, handling characteristics, and success rates with the added advantage of eliminating permanent foreign body in the arterial wall when it is absorbed.     

Mechanism of tissue fusion in argon laser-welded vein-artery anastomoses

The mechanism of laser vascular tissue welding remains unknown. This study compared the acute tissue response and long-term healing of sutured and laser-welded anastomoses of vein segments used to bypass ligated canine femoral arteries. For each procedure, one anastomosis was formed using running 6-0 polypropylene suture (control), and the other anastomosis was formed using argon laser tissue welding (experimental). The vein grafts were harvested at 4 (n = 2), 8 (n = 1), 12 (n = 1), and 16 (n = 2) weeks, and selected samples were evaluated by histologic examination, electron microscopy, tensile strength testing, and by measuring the formation of [3H]hydroxyproline as an index of collagen synthesis. Examination of successful laser fusions immediately after they were formed showed bonding of collagen to collagen and elastin to collagen. Follow-up evaluations showed that the precision of tissue apposition affected the rate of healing and tensile strength. Laser-welded anastomoses demonstrated a progression of healing similar to sutured repairs, with remodeling of fibrous tissue and collagen being the primary component of weld integrity. This study demonstrates that sutured and argon laser-welded vein-artery anastomoses heal comparably up to 16 weeks postoperatively, and that laser welding is a satisfactory alternative to sutured anastomoses.     

Microvenous end-to-side anastomosis: an experimental study comparing the Unilink system and sutures

A method for mechanical microvascular end-to-side anastomosis is presented and compared to conventional suture technique. Twenty rabbits had their facial veins divided from the jugular veins and reanastomosed end-to-side to the jugular veins, 2 cm cranially to the original bifurcation. The anastomoses were performed on one side of the neck with the Unilink system and on the other side with sutures. At sacrifice at two weeks (10 animals) and at 16 weeks (10 animals), all anastomoses were tested for patency and histologically evaluated. All 40 anastomoses were fully patent. The time required for completion of a mechanical anastomosis was on the average one-fourth the time required for suture anastomosis. No thrombus formation was noted in any of the specimens, but a slight narrowing because of intimal hyperplasia was noted in the recipient vessels in two mechanical anastomoses. It was demonstrated that mechanical anastomoses of small veins end-to-side can be performed in a rapid and safe manner with the Unilink system.     

Growth of tracheal anastomoses in lambs. Comparison of PDS and Vicryl suture material and interrupted and continuous techniques

Tracheal anastomoses were performed in 19 lambs (mean age 4 weeks, mean weight 9.8 kg) to compare polydioxanone (PDS) and polyglactin 910 (Vicryl) suture material (Ethicon, Inc., Somerville, N.J.) and simple continuous and simple interrupted suture technique. Each animal had two anastomoses with full-thickness bites for both suture techniques. Animals were killed at 4 months (n = 6) or 8 months (n = 5). Eight animals died before they were scheduled to be put to death (mean 6 weeks postoperatively). Transverse sections of the trachea were taken at the level of the anastomoses and three tracheal rings above and below each anastomosis. The cross-sectional area of the tracheal lumen of these transverse sections was measured with a computerized digitizing tablet. A percent luminal area for each anastomosis was calculated relative to the mean tracheal area three rings above and three rings below the anastomosis. There was little difference between interrupted and continuous technique with either suture material (p = 0.94). In 10 animals that each served as its own control for suture material, PDS anastomotic area was 55.0% +/- 4.1% of mean tracheal luminal area compared with 45.4% +/- 7.1% for Vicryl anastomoses (p = 0.06). Histologic analysis revealed a more intense inflammatory reaction surrounding multifilament Vicryl sutures with more rapid resorption and greater subsequent fibrosis relative to the reaction seen with PDS sutures. A small clinical experience with seven infants has confirmed short-term satisfactory clinical performance of continuous PDS suture for tracheal anastomosis.     

Laser-assisted microsurgical anastomosis

A low power carbon dioxide laser was used to perform 212 end-to-end laser-assisted microvascular anastomoses (LAMA) of femoral arteries (mean diameter, 1.2 mm) in Sprague-Dawley rats. Eighty-two conventional microvascular suture anastomoses (CMSA) utilizing 10-0 monofilament interrupted sutures were done for comparison of techniques and wound healing. The mean duration of each anastomosis procedure was 16 minutes for the LAMA repairs, compared to an average of 27 minutes for the CMSA repairs (P less than 0.05). All anastomoses were patent at the completion of the procedure. Each laser-assisted anastomosis required an average of seven intermittent laser exposures of 0.1 to 0.3 seconds each with approximately 80 mW of CO2 (wavelength = 10.6 micron) radiation at a spot size of 150 micron. A patency rate of 95% was obtained on the LAMA vessels (202 of 212) compared to 96% for the CMSA repairs (79 of 82). A total of 14 aneurysms were noted in the LAMA group (7%) compared to 11 in the CMSA (13%). All aneurysms were in patent vessels. Histological analysis indicates that the progression of wound healing of LAMA and CMSA anastomoses follows similar paths chronologically and morphologically with increased scar tissue formation around the suture. Scanning electron microscopy confirms the comparable luminal healing of the LAMA and CMSA vessels, with complete reendothelialization occurring by 3 weeks postoperatively. The tensile strength of the LAMA repair, although low immediately after operation, is comparable to that of the intact artery at 21 days. These findings suggest that a low energy carbon dioxide microsurgical laser has potential beneficial clinical application for anastomosis of small vessels.     

End-to-side and end-to-end vascular anastomoses with a carbon dioxide laser

This study was designed to compare anastomoses performed with a carbon dioxide laser and conventional anastomoses performed with 7-0 polypropylene suture. In each of 80 rabbits, the divided left carotid artery was anastomosed by a continuous suture technique and the right carotid was anastomosed with a carbon dioxide laser. In each of 40 additional rabbits, both end-to-end and end-to-side laser anastomoses were performed on the same carotid artery. The laser technique involved the placement of three stay sutures (end-to-end technique) or four stay sutures (end-to-side technique) of 7-0 polypropylene and an everting laser seal at a power level of 65 mW. The 1-year overall patency rate was 98% (78/80) in laser anastomoses, 79% (63/80) in suture anastomoses, and 95% (38/40) in combined end-to-end and end-to-side laser anastomoses. Microscopic findings in laser anastomoses demonstrated degeneration of collagen and protein in the adventitia and media, but much less intimal injury than in suture anastomoses, with reendothelialization beginning earlier (within 7 days after anastomosis as compared with 2 to 4 weeks). The tissue tensile strength at 1 hour was less in laser anastomoses than in suture anastomoses, but the laser anastomoses still withstood an intraluminal pressure load of 380 mm Hg. Laser anastomosis improved the microscopic and histologic appearance of the intimal layer, allowing for rapid early reendothelialization and resulting in excellent patency rates.     

Argon laser-assisted anastomoses in medium-size vessels: one-year follow-up

Laser-assisted anastomosis of medium-size vessels can be performed with satisfactory short-term patency. This study was undertaken to evaluate patency and structural integrity up to 1 year. An argon laser was used to make bilateral femoral arteriovenous anastomoses in 12 dogs compared to conventional suture method in another 8 dogs. These anastomoses were evaluated for patency and aneurysm formation at 1 hour; 1, 2, 4, and 8 weeks; and 12 months after surgery. All anastomotic sites were patent and without aneurysmal change or luminal narrowing at all harvesting intervals. Histologic examination revealed that within 1 month laser anastomotic sites were almost completely healed and without intimal hyperplasia. In suture anastomoses, foreign-body reaction remained evident up to 1 year. Use of the argon laser for medium size vessel anastomoses resulted in excellent patency without aneurysm formation or intimal hyperplasia even in the long term. These data suggest promising clinical applications.     

Comparison of laser-welded and sutured arteriotomies

We compared the histologic features, tensile strength, and collagen synthesis of laser-welded and sutured arteriotomies. Four bilateral canine femoral or carotid arteries, 2 cm long, were studied at one through four weeks postoperatively, with one vessel (control) closed with interrupted 6-0 polypropylene sutures and the contralateral vessel (experimental) welded with an argon laser (0.5 W [1417 J/cm2], four-minute exposure per 1-cm length of incision). Histologic examination revealed that laser-welded arteriotomies had less inflammatory reaction, more normal collagen and elastin reorientation, and similar endothelial continuity when compared with the control, sutured wounds. The tensile strength of the one- and two-week laser-welded specimens was less than that of sutured wounds and became approximately equal to sutured repairs at three and four weeks. There were no significant differences in the rate of collagen synthesis. There was no evidence of abnormal healing in the laser-welded specimens, suggesting that argon laser welding may be an alternative to suture repair of arteriotomies.     

Experimental study of singly placed staples for an everted intestinal anastomosis

This study was undertaken to confirm the technical feasibility and efficacy of an intestinal anastomosis created with singly placed staples in dogs. In 12 fully conditioned dogs, two end-to-end small bowel anastomoses were performed in an everted manner. In each dog, one anastomosis was performed with singly placed staples utilizing the Auto Suture 4.8 mm disposable skin stapler, and the other anastomosis was performed with a manual technique using 3-0 Dexon interrupted suture. Operation time was measured for each anastomosis. Dogs were sacrificed 2, 4, and 8 weeks postoperatively. Each anastomosis was examined grossly and microscopically, and its tensile strength was measured. All dogs survived without complications. Gross and microscopic examinations showed satisfactory healing of both types of anastomoses at different postoperative intervals. The stapled anastomosis required significantly shorter time (p less than 0.01), and had significantly greater tensile strength (p less than 0.05) when compared with manual anastomosis.     

Experimental laser-assisted end-to-side microvascular anastomosis

The authors present a new technique of end-to-side microvascular anastomosis in a rat carotid artery model, employing a milliwatt CO2 laser. Both carotid arteries were isolated and approximated in an end-to-side fashion by the placement of four 10-0 nylon stay sutures. The milliwatt CO2 laser was used to effect vessel anastomosis between the sutures, using 70-100 mW of power. Animals were killed 8 weeks postoperatively. Angiography of each anastomosis was performed in all animals. All anastomoses were then harvested, and submitted for histological analysis. Anastomotic patency was 100%, both intraoperatively and angiographically. There was no evidence of intravascular thrombus, anastomotic stenosis, or pseudoaneurysm formation. Early in the experiment, some anastomoses showed localized dilatation at the anastomotic site. The histologic changes at the anastomotic site are described. Laser-assisted microvascular anastomosis is a feasible technique, and a potential alternative to conventional suture techniques.     

A comparison of CO2 laser-assisted venous anastomoses and conventional suture techniques: patency, aneurysm formation, and histologic differences

The expected patency and the potential complications of CO2 laser-welded end-to-end venous anastomoses have not been well established despite increasing clinical interest in the subject. To further study this relatively new technique we used the internal jugular veins (1.0 to 1.4 mm diameter) of 15 New Zealand White rabbits weighing 2.5 to 3.5 kg. On one randomly selected side, a laser-welded end-to-end anastomosis was performed in all animals by placing three equidistant stay sutures followed by welding the vein edges with a CO2 laser (spot size of 0.27 mm, power of 100 mW, and power density of 175 W/cm2). On the contralateral side, the vein was anastomosed with interrupted 10-0 nylon sutures in 10 animals, and in the remaining five animals a continuous 10-0 nylon suture technique was used. All anastomoses were surgically assessed at 30 days after operation. A significantly lower 30-day patency rate (p less than 0.05, Fisher's Exact Test) was found in anastomoses constructed by use of the continuous technique (20%) compared with either interrupted (90%) or the laser-assisted technique (87%). No significant difference was observed in 30-day patency between laser-assisted and conventional interrupted anastomoses. Anastomoses performed with the continuous and the laser-assisted technique required 12.5 +/- 1.3 and 12.9 +/- 3.0 minutes, respectively, whereas those constructed with interrupted technique required 19.1 +/- 4.5 minutes (p less than 0.05, Student-Neuman-Keuls' Test). No evidence of false or true aneurysm was noted in any of the animals. Histologic evaluation of laser-assisted anastomoses demonstrated early full-thickness coagulation necrosis of the wall with reendothelialization by 7 days and complete healing by 30 days after the procedure. Conventional anastomoses showed reendothelialization and minimal necrosis near the sutures at 7 days, but healing was complete by 30 days after the procedure. The patency rate of vein anastomoses performed with the CO2 laser is excellent and superior to the one obtained with continuous sutures, and except for less operating time, the former technique does not appear to offer any significant advantage over the conventional interrupted suture technique for small vein anastomosis in this animal model up to 1 month of follow-up.     

Laser-assisted microvascular anastomoses: angiographic and anatomopathologic studies on growing microvascular anastomoses: preliminary report

A low-powered carbon dioxide laser was used to perform end-to-end anastomoses of growing femoral arteries (mean diameter 1.6 mm) in miniature swine. Five microvascular conventional anastomoses were performed with 10-0 monofilament interrupted sutures. Nine laser-assisted vascular anastomoses were performed. The mean duration of each anastomosis was 30 +/- 3 minutes for the conventional anastomosis and 20 +/- 2 minutes for the laser-assisted vascular anastomosis (p less than 0.05). All anastomoses were patent at the completion of the procedure. Each laser-assisted anastomosis required an average of eight laser pulses of 2 to 4 seconds. After 13 weeks the external diameters of the conventional anastomoses were 1.8 mm (+15%), while the laser-assisted anastomoses averaged 3.0 mm (+81%) (p less than 0.05). All nine laser-assisted anastomoses were patent, functional, and free of stenosis compared with one out of five conventional anastomoses. Histologically the laser induced minimal or no fibrosis, allowing normal physiologic healing and growth patterns. Electron microscopy confirmed that the integrity of the arterial layers had been restored. These findings suggest that a low-energy carbon dioxide laser has potential clinical application for anastomosis of small growing vessels.     

Microvascular anastomoses using an Nd-YAG laser

The authors performed anastomoses of small vessels with the Nd-YAG laser, comparing these with conventional suture anastomoses. Some arteries were sutured with 10-0 nylon with about eight suture sites, and others were held by stay sutures at three points with laser irradiation performed between them. Two surgeons performed the anastomoses in the same way. The first was well-trained and experienced, and the second was technically inexperienced. The authors evaluated clamping time, patency rate, and endoscopic and histologic findings. The patency rate of the first surgeon was 100 percent (30/30) in the suture anastomoses and was 97 percent (29/30) in the laser anastomoses. For the second surgeon, the rates were 60 percent (18/30) in the suture group and 80 percent (24/30) in the laser group. On histologic examination, the suture group showed inflammatory cells around the suture site at the fourth week after the operation. In the laser group, an inflammatory reaction around the suture material was observed, but the other areas recovered. For the experienced surgeon, the patency rate and clamping time of the laser anastomosis provided no statistically significant difference to those of the suture anastomosis. On the other hand, for the inexperienced surgeon, the patency rate of the laser anastomosis was superior to that of the suture anastomosis, and the clamping time of the laser anastomosis was shorter than that of the suture anastomosis. Therefore, the authors concluded that the Nd-YAG laser anastomosis is useful for small vessels.     

Laser assisted fusion of the rat stomach: preliminary studies

The purpose of this study was (1) to determine whether rat gastrotomies could be securely closed without sutures by CO2 laser-induced tissue fusion alone and (2) to compare some characteristics (physical, biochemical, histological) of laser-fused gastrotomies with sutured gastrotomies. Following pentobarbital anesthesia a 1.5-cm longitudinal anterior gastrotomy was made in the forestomach of male Sprague-Dawley rats. This wound was closed using either a sutureless tissue weld created by a microscope-mounted CO2 laser (153 W/cm2) (Group I, N = 61) or with a running 6-O polypropylene suture (Group II, N = 58). Animals were sacrificed on Postoperative Days 1, 2, 4, 7, and 11 and the wounds were studied. Survival to scheduled sacrifice was 95% in Group I and 93% in Group II. Although bursting pressure of laser-fused gastrotomies was significantly lower than that of sutured controls on Postoperative Day 1, measurement on subsequent days showed comparable wound strength between the laser and suture groups. Wound hydroxyproline content was significantly higher on Postoperative Day 1 and lower on Postoperative Day 11 in the laser group. Histologic examination of the laser-fused wounds revealed less inflammation and earlier reepithelialization than the sutured wounds, giving the microscopic appearance of a "neater" healing wound. These results suggest that laser-induced fusion is a feasible method of gastrointestinal wound closure which may complement standard suture techniques.     

Healing of experimental colonic anastomoses. The effect of suture technic on collagen concentration in the colonic wall.

The present experimental study in rats has demonstrated a marked difference in the healing process of anastomoses in the left colon following two different suture technics: continuous and interrupted sutures. Rats having anastomoses constructed of continuous suture showed a high incidence of complications and a marked decrease of collagen concentration in the anastomosis and in the colonic wall proximal to the anastomosis during the first week of healing. In animals with anastomoses made of interrupted sutures there were fewer complications, the decrease in collagen concentration was confined to the anastomotic region, and the recovery of collagen concentration occurred earlier. The findings indicate that the interrupted suture technic is preferable for anastomosis in the left colon.     

Preliminary report: a new technique of enterotomy closure using Nd:YAG laser welding compared to suture repair

This study compared the histology and tensile strength of Nd:YAG laser welded and sutured small bowel enterotomies in Sprague-Dawley rats. Enterotomies (0.5 cm long) were either welded with the Nd:YAG laser (1 W and 10.6 sec pulses) or repaired with interrupted, simple 6-O silk sutures. Group I consisted of seven animals; five with enterotomies repaired by laser welding and two repaired by suturing. Group II consisted of eight animals with each having both laser and suture repairs. Animals were killed and specimens were removed and examined at 1 day, and at 1, 2, and 3 weeks postoperatively to compare the progression of healing. On macroscopic examination the laser welded enterotomies were closed 84% of the time and only 23% had adhesion formation while 90% of sutured repairs were closed and 100% had adhesion formation. Histologic examination of both suture and laser welded enterotomies demonstrated active healing at 1 week with minimal collagen bridging the enterotomies. At 2 and 3 weeks the sutured enterotomies had granulomatous reaction around the sutures while the laser welded enterotomies had minimal inflammatory response and near normal small bowel histology. The tensile strength of the 3-week specimens from both the suture and laser welded enterotomies were 50% of normal bowel. These findings suggest that the laser welding of small bowel enterotomies is comparable in closure and tensile strength to suture repair. The time required to repair the enterotomy is significantly decreased, the procedure is easily performed, and there is a marked decrease in adhesion formation following laser repair.