Directional topography gradients drive optimum alignment and differentiation of human myoblasts

Tissue engineering of skeletal muscle aims to replicate the parallel alignment of myotubes on the native tissue. Directional topography gradients allow the study of the influence of topography on cellular orientation, proliferation, and differentiation, resulting in yield cues and clues to develop a proper in vitro environment for muscle tissue engineering. In this study, we used a polydimethylsiloxane‐based substrate containing an aligned topography gradient with sinusoidal features ranging from wavelength (λ) = 1,520 nm and amplitude (A) =176 nm to λ = 9,934 nm and A = 2,168 nm. With this topography gradient, we evaluated the effect of topography on human myoblasts distribution, dominant orientation, cell area, nuclei coverage, cell area per number of nuclei, and nuclei area of myotubes. We showed that human myoblasts aligned and differentiated irrespective of the topography section. In addition, aligned human myotubes showed functionality and maturity by contracting spontaneously and nuclei peripheral organization resembling natural myotubes.     

Silk fibroin scaffolds with muscle‐like elasticity support in vitro differentiation of human skeletal muscle cells

Human adult skeletal muscle has a limited ability to regenerate after injury and therapeutic options for volumetric muscle loss are few. Technologies to enhance regeneration of tissues generally rely upon bioscaffolds to mimic aspects of the tissue extracellular matrix (ECM). In the present study, silk fibroins from four Lepidoptera (silkworm) species engineered into three‐dimensional scaffolds were examined for their ability to support the differentiation of primary human skeletal muscle myoblasts. Human skeletal muscle myoblasts (HSMMs) adhered, spread and deposited extensive ECM on all the scaffolds, but immunofluorescence and quantitative polymerase chain reaction analysis of gene expression revealed that myotube formation occurred differently on the various scaffolds. Bombyx mori fibroin scaffolds supported formation of long, well‐aligned myotubes, whereas on Antheraea mylitta fibroin scaffolds the myotubes were thicker and shorter. Myotubes were oriented in two perpendicular layers on Antheraea assamensis scaffolds, and scaffolds of Philosamia/Samia ricini (S. ricini) fibroin poorly supported myotube formation. These differences were not caused by fibroin composition per se, as HSMMs adhered to, proliferated on and formed striated myotubes on all four fibroins presented as two‐dimensional fibroin films. The Young's modulus of A. mylitta and B. mori scaffolds mimicked that of normal skeletal muscle, but A. assamensis and S. ricini scaffolds were more flexible. The present study demonstrates that although myoblasts deposit matrix onto fibroin scaffolds and create a permissive environment for cell proliferation, a scaffold elasticity resembling that of normal muscle is required for optimal myotube length, alignment, and maturation. © 2016 The Authors Journal of Tissue Engineering and Regenerative Medicine Published by John Wiley & Sons Ltd. StartCopTextStartCopText© 2016 The Authors Journal of Tissue Engineering and Regenerative Medicine Published by John Wiley & Sons Ltd.     

Induction of myasthenia by immunization against muscle-specific kinase

Muscle-specific kinase (MuSK) is critical for the synaptic clustering of nicotinic acetylcholine receptors (AChRs) and plays multiple roles in the organization and maintenance of neuromuscular junctions (NMJs). MuSK is activated by agrin, which is released from motoneurons, and induces AChR clustering at the postsynaptic membrane. Although autoantibodies against the ectodomain of MuSK have been found in a proportion of patients with generalized myasthenia gravis (MG), it is unclear whether MuSK autoantibodies are the causative agent of generalized MG. In the present study, rabbits immunized with MuSK ectodomain protein manifested MG-like muscle weakness with a reduction of AChR clustering at the NMJs. The autoantibodies activated MuSK and blocked AChR clustering induced by agrin or by mediators that do not activate MuSK. Thus MuSK autoantibodies rigorously inhibit AChR clustering mediated by multiple pathways, an outcome that broadens our general comprehension of the pathogenesis of MG.     

Three‐dimensional co‐culture of C2C12/PC12 cells improves skeletal muscle tissue formation and function

Engineered muscle tissues demonstrate properties far from native muscle tissue. Therefore, fabrication of muscle tissues with enhanced functionalities is required to enable their use in various applications. To improve the formation of mature muscle tissues with higher functionalities, we co‐cultured C2C12 myoblasts and PC12 neural cells. While alignment of the myoblasts was obtained by culturing the cells in micropatterned methacrylated gelatin (GelMA) hydrogels, we studied the effects of the neural cells (PC12) on the formation and maturation of muscle tissues. Myoblasts cultured in the presence of neural cells showed improved differentiation, with enhanced myotube formation. Myotube alignment, length and coverage area were increased. In addition, the mRNA expression of muscle differentiation markers (Myf‐5, myogenin, Mefc2, MLP), muscle maturation markers (MHC‐IId/x, MHC‐IIa, MHC‐IIb, MHC‐pn, α‐actinin, sarcomeric actinin) and the neuromuscular markers (AChE, AChR‐ε) were also upregulated. All these observations were amplified after further muscle tissue maturation under electrical stimulation. Our data suggest a synergistic effect on the C2C12 differentiation induced by PC12 cells, which could be useful for creating improved muscle tissue. Copyright © 2014 John Wiley & Sons, Ltd.     

Chondrogenic potential of electrospun nanofibres for cartilage tissue engineering

Articular cartilage has a heterogeneous structure, comprising elongated cells at the articulating surface and rounded cells elsewhere. This feature poses a complex challenge when fabricating 3D tissue engineering scaffolds able to mimic the native extracellular matrix (ECM) of cartilage for tissue repair and regeneration. Nanofibre scaffolds can provide an ECM-like structure, but are mechanically weak and typically have subcellular pore geometries. In this study, the use of poly(L,D-lactide) (PLDLA) nanofibre coatings on PLDLA microfibres or films (nanofibre composites) to influence bovine chondrocyte behaviour was investigated. It was demonstrated that electrospun nanofibres facilitated the adhesion of chondrocytes and helped to maintain smaller projected cell areas and a rounded cell phenotype, when compared to PLDLA films or microfibres. Random nanofibre composites were associated with the smallest and most rounded cells and aligned nanofibre composites also demonstrated a similar tendency. Quantitative PCR revealed that nanofibres promoted the expression of chondrogenic markers, such as collagen type IIaI and aggrecan, while maintaining low levels of collagen IaI. It was also found, by water contact angle measurement, that nanofibres were significantly more hydrophobic than cast films. The lower wettability of polymeric nanofibres favoured the maintenance of rounded chondrocyte morphology. To our knowledge this is the first study to confirm the positive influence on preserving chondrogenic phenotype and gene expression at the interface of true nano-microfibrous composites by using individual microfibres coated with aligned nanofibres. Such composites can potentially be fabricated into mechanically durable 3D scaffolds with better cell infiltration throughout the scaffolds.     

Electrical stimulation of microengineered skeletal muscle tissue: Effect of stimulus parameters on myotube contractility and maturation

Skeletal muscle tissues engineered in vitro are aneural, are short in the number of fibres required to function properly and degenerate rapidly. Electrical stimulation has been widely used to compensate for such a lack of neural activity, yet the relationship between the stimulation parameters and the tissue response is subject to debate. Here we studied the effect of overnight electrical stimulation (training) on the contractility and maturity of aligned C2C12 myotubes developed on micropatterned gelatin methacryloyl (GelMA) substrates. Bipolar rectangular pulse (BRP) trains with frequency, half‐duration and applied pulse train amplitudes of f = 1 Hz, t_on = 0.5 ms and V_app = {3 V, 4 V, 4.5 V}, respectively, were applied for 12 h to the myotubes formed on the microgrooved substrates. Aligned myotubes were contracting throughout the training period for V_app ≥ 4 V. Immediately after training, the samples were subjected to series of BRPs with 2 ≤ V_app ≤ 5 V and 0.2 ≤ t_on ≤ 0.9 ms, during which myotube contraction dynamics were recorded. Analysis of post‐training contraction revealed that only the myotubes trained at V_app = 4 V displayed consistent and repeatable contraction profiles, showing the dynamics of myotube contractility as a function of triggering pulse voltage and current amplitudes, duration and imposed electrical energy. In addition, myotubes trained at V_app = 4 V displayed amplified expression levels of genes pertinent to sarcomere development correlated with myotube maturation. Our findings are imperative for a better understanding of the influence of electrical pulses on the maturation of microengineered myotubes.     

In vitro cellular response to oxidized collagen–PLLA hybrid scaffolds designed for the repair of muscular tissue defects and complex incisional hernias

Unique poly(l ‐lactic acid) (PLLA)‐based scaffolds were constructed by embedding knitted PLLA yarns within a bioresorbable and differentially crosslinked three‐dimensional (3D) oxidized collagen scaffold. The scaffolds were designed specifically for the repair of complex incisional abdominal wall hernias and the repair of defects within planar muscular tissues, such as the bladder. The chemical composition of the collagen matrix and the percentage of scaffold infiltration were compared for the different scaffold compositions. The results demonstrate that the incorporation of the collagen sponge within the PLLA scaffold facilitated bladder smooth muscle cell (bSMC) adhesion and proliferation. The highest dose of oxidized collagen (Oxicol) demonstrated better cell adhesion, resulting in the largest cell densities and most uniform distribution throughout the 3D collagen sponge. This formulation promoted the greatest α‐smooth muscle actin (αSMA) expression detected through immunohistochemical staining and western blotting. For abdominal wall repair applications, the proliferation and differentiation of C2C12 myoblasts and myotube formation were studied. Following 7 days of myogenic induction, the greatest expression of mRNA of the myogenic markers myogenin and MRF4 was observed within the scaffolds with the highest dose of oxidized collagen, 1.5‐ and 3.85‐fold greater expressions, respectively, compared to PLLA with unmodified collagen. Furthermore, in vitro myotube formation and MyMC expression were enhanced in the Oxicol scaffolds. We conclude that the Oxicol scaffold formulation with a high‐dose oxidized collagen ratio provides enhanced myogenesis and αSMA, and the biological induction cues necessary to achieve better tissue integration, than standard PLLA scaffolds in the treatment of complex abdominal wall hernias. Copyright © 2013 John Wiley & Sons, Ltd.     

人类胚胎来源成肌细胞的培养和鉴定

背景：人类胚胎骨骼肌含有成肌细胞,其在体外条件下的培养及在体外能否融合形成肌管,以及表达的相应的标志物,目前尚不明确。目的：验证源于人类胚胎骨骼肌的成肌细胞在体外条件下的培养条件,能否在体外融合形成肌管,能否表达神经细胞的标志物。方法：采用组织块培养法对人类胚胎肌肉来源的成肌细胞进行原代培养,以免疫细胞化学染色检测培养的细胞肌肉细胞标志物desmin、myogenin、平滑肌肌动蛋白、myosin和神经细胞标志物β-tubulinⅢ、nestin、neurofilament200（NF200）、胶质纤维酸性蛋白的表达。结果与结论：从人类胚胎肌肉组织中成功培养出成肌细胞,表达成肌细胞的标志物desmin和myogenin,同时也表达神经元特异性烯醇化酶、nestin和NF200,细胞能够在体外融合形成含有多个细胞核的肌管,融合的肌管可以表达NF200、β-tubulinⅢ和胶质纤维酸性蛋白等神经细胞的标志物。结果证实,人类胚胎肌肉来源的成肌细胞能够同时表达神经细胞和肌肉细胞的标志物,培养的成肌细胞和肌管细胞表达神经元特异性烯醇化酶、β-tubulinⅢ、nestin、NF200和胶质纤维酸性蛋白。说明这几种神经细胞标志物不能用于肌肉来源的细胞向神经细胞跨分化的鉴定研究。     

骨骼肌卫星细胞的体外培养与生物学特性(英文)

目的:建立理想的骨骼肌卫星细胞体外培养方法,探讨其生物学特性,以达到应用于组织工程和基因治疗的目的。方法:采用Ⅰ型胶原酶和胰蛋白酶二步消化法获取大鼠骨骼肌卫星细胞,进行体外原代和传代培养。观察细胞的形态,通过生长曲线、细胞融合率研究骨骼肌卫星细胞的增殖与分化能力,利用免疫细胞化学染色对所获得的细胞进行鉴定。结果:二步消化法适用于骨骼肌卫星细胞的获取。在生长培养基作用下,细胞增殖旺盛;在分化培养基条件下,细胞分化良好,可融合成肌管。α-sarcometric肌动蛋白和肌球蛋白细胞免疫化学染色,骨骼肌卫星细胞弱阳性,肌管强阳性。结论:体外培养的骨骼肌卫星细胞具有良好的增殖与分化能力,适用于组织工程和基因治疗。     

Laminin‐modified and aligned poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/polyethylene oxide nanofibrous nerve conduits promote peripheral nerve regeneration

Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) has received much attention for its biodegradability and biocompatibility, characteristics that are required in tissue engineering. In this study, polyethylene oxide (PEO)‐incorporated PHBV nanofibres with random or aligned orientation were obtained by electrospinning. For further use in vivo, the nanofibre films were made into nerve conduits after treatment with NH₃ plasma, which could improve the hydrophilicity of inner surfaces of nerve conduits and then facilitate laminin adsorption via electrostatic interaction for promoting cell adhesion and proliferation. Morphology of the surfaces of modified PHBV/PEO nanofibrous scaffolds were examined by scanning electron microscopy. Schwann cell viability assay was conducted and the results confirmed that the functionalized nanofibres were favourable for cell growth. Morphology of Schwann cells cultured on scaffolds showed that aligned nanofibrous scaffolds provided topographical guidance for cell orientation and elongation. Furthermore, three‐dimensional PHBV/PEO nerve conduits made from aligned and random‐oriented nanofibres were implanted into 12‐mm transected sciatic nerve rat model and subsequent analysis were conducted at 1 and 2 months postsurgery. The above functionalized PHBV/PEO scaffolds provide a novel and promising platform for peripheral nerve regeneration. Copyright © 2016 John Wiley & Sons, Ltd.     

Effects of heat stimulation and l‐ascorbic acid 2‐phosphate supplementation on myogenic differentiation of artificial skeletal muscle tissue constructs

Although skeletal muscle tissue engineering has been extensively studied, the physical forces produced by tissue‐engineered skeletal muscles remain to be improved for potential clinical utility. In this study, we examined the effects of mild heat stimulation and supplementation of a l ‐ascorbic acid derivative, l ‐ascorbic acid 2‐phosphate (AscP), on myoblast differentiation and physical force generation of tissue‐engineered skeletal muscles. Compared with control cultures at 37°C, mouse C2C12 myoblast cells cultured at 39°C enhanced myotube diameter (skeletal muscle hypertrophy), whereas mild heat stimulation did not promote myotube formation (differentiation rate). Conversely, AscP supplementation resulted in an increased differentiation rate but did not induce skeletal muscle hypertrophy. Following combined treatment with mild heat stimulation and AscP supplementation, both skeletal muscle hypertrophy and differentiation rate were enhanced. Moreover, the active tension produced by the tissue‐engineered skeletal muscles was improved following combined treatment. These findings indicate that tissue culture using mild heat stimulation and AscP supplementation is a promising approach to enhance the function of tissue‐engineered skeletal muscles. Copyright © 2015 John Wiley & Sons, Ltd.     

Characterization of human myoblast differentiation for tissue-engineering purposes by quantitative gene expression analysis

Tissue engineering of skeletal muscle is an encouraging possibility for the treatment of muscle loss through the creation of functional muscle tissue in vitro from human stem cells. Currently, the preferred stem cells are primary, non-immunogenic satellite cells ( = myoblasts). The objective of this study was to determine the expression patterns of myogenic markers within the human satellite cell population during their differentiation into multinucleated myotubes for an accurate characterization of stem cell behaviour. Satellite cells were incubated (for 1, 4, 8, 12 or 16 days) with a culture medium containing either a low [ = differentiation medium (DM)] or high [ = growth medium (GM)] concentration of growth factors. Furthermore, we performed a quantitative gene expression analysis of well-defined differentiation makers: myogenic factor 5 (MYF5), myogenin (MYOG), skeletal muscle αactin1 (ACTA1), embryonic (MYH3), perinatal (MYH8) and adult skeletal muscle myosin heavy chain (MYH1). Additionally, the fusion indices of forming myotubes of MYH1, MYH8 and ACTA1 were calculated. We show that satellite cells incubated with DM expressed multiple characteriztic features of mature skeletal muscles, verified by time-dependent upregulation of MYOG, MYH1, MYH3, MYH8 and ACTA1. However, satellite cells incubated with GM did not reveal all morphological aspects of muscle differentiation. Immunocytochemical investigations with antibodies directed against the differentiation markers showed correlations between the gene expression and differentiation. Our data provide information about time-dependent gene expression of differentiation markers in human satellite cells, which can be used for maturation analyses in skeletal muscle tissue-engineering applications.     

Development and evaluation of axially aligned nanofibres for blood vessel tissue engineering

Biodegradable polymers have been extensively used as scaffolds to regenerate lost tissues. The geometry of the three‐dimensional (3D) scaffolds has an influence on the cellular behaviour. In this study, we have developed 3D‐scaffolds of axially aligned nanofibres of poly(lactic acid) (PLA), poly(caprolactone) (PCL) and PLA:CL (50:50) with diameters in the range 100–400 nm, internal diameter 4 mm, length 4 cm and wall thickness 0.2 mm, by using a dynamic collector. PCL and PLA:CL nanofibres were significantly less hydrophobic than PLA nanofibres. The porosity of PCL (16.23 ± 9.88%) and PLA:CL nanofibres (14.77 ± 3.41%) were comparable, while PLA (6.57 ± 1.54%) nanofibres had lower porosity. The tensile strength and Young's modulus of PLA was significantly lower than PCL and PLA:CL nanofibres and the suture retention strengths of all three scaffolds were comparable. After 4 weeks, the molecular weight of PLA nanofibres was reduced by 53% compared to 44% and 41% for PCL and the PLA:CL nanofibres, respectively. However, the PLA:CL nanofibres maintained their structural integrity even after 28 days. Platelet adhesion studies showed that PCL nanofibres had least tendency to be thrombogenic, while PLA:CL blend nanofibres were highly thrombogenic. Further, in vitro responses such as cell adhesion, proliferation and gene expression of human umbilical vascular endothelial cells (HUVECs) were evaluated. After 6 days of culture, the surfaces of all the three scaffolds were completely covered with cells. Our results demonstrate that expression levels of elastin, angiopoietin, laminin‐4α and ‐5α were upregulated in PCL and PLA:CL nanofibres without the addition of any exogenous factors. Copyright © 2012 John Wiley & Sons, Ltd.     

Electrospun fibrinogen–PLA nanofibres for vascular tissue engineering

Here we report on the development of a new type of hybrid fibrinogen–polylactic acid (FBG–PLA) nanofibres (NFs) with improved stiffness, combining the good mechanical properties of PLA with the excellent cell recognition properties of native FBG. We were particularly interested in the dorsal and ventral cell response to the nanofibres' organization (random or aligned), using human umbilical endothelial cells (HUVECs) as a model system. Upon ventral contact with random NFs, the cells developed a stellate‐like morphology with multiple projections. The well‐developed focal adhesion complexes suggested a successful cellular interaction. However, time‐lapse analysis shows significantly lowered cell movements, resulting in the cells traversing a relatively short distance in multiple directions. Conversely, an elongated cell shape and significantly increased cell mobility were observed in aligned NFs. To follow the dorsal cell response, artificial wounds were created on confluent cell layers previously grown on glass slides and covered with either random or aligned NFs. Time‐lapse analysis showed significantly faster wound coverage (within 12 h) of HUVECs on aligned samples vs. almost absent directional migration on random ones. However, nitric oxide (NO) release shows that endothelial cells possess lowered functionality on aligned NFs compared to random ones, where significantly higher NO production was found. Collectively, our studies show that randomly organized NFs could support the endothelization of implants while aligned NFs would rather direct cell locomotion for guided neovascularization. Copyright © 2016 John Wiley & Sons, Ltd.     

Gene transfer of connexin43 into skeletal muscle

Cellular cardiomyoplasty using skeletal myoblasts may be beneficial for infarct repair. One drawback to skeletal muscle cells is their lack of gap junction expression after differentiation, thus preventing electrical coupling to host cardiomyocytes. We sought to overexpress the gap junction protein connexin43 (Cx43) in differentiated skeletal myotubes, using retroviral, adenoviral, and plasmid-mediated gene transfer. All strategies resulted in overexpression of Cx43 in cultured myotubes, but expression of Cx43 from constitutive viral promoters caused significant death upon differentiation. Dye transfer studies showed that surviving myotubes contained functional gap junctions, however. Retrovirally transfected myoblasts did not express Cx43 after grafting into the heart, possibly due to promoter silencing. Adenovirally transfected myoblasts expressed abundant Cx43 after forming myotubes in cardiac grafts, but grafts showed signs of injury at 1 week and had died by 2 weeks. Interestingly, transfection of already differentiated myotubes with adenoviral Cx43 was nontoxic, implying a window of vulnerability during differentiation. To test this hypothesis, Cx43 was expressed from the muscle creatine kinase (MCK) promoter, which is active only after myocyte differentiation. The MCK promoter resulted in high levels of Cx43 expression in differentiated myotubes but did not cause cell death during differentiation. MCK-Cx43-transfected myoblasts formed viable cardiac grafts and, in some cases, Cx43-expressing myotubes were in close apposition to host cardiomyocytes, possibly allowing electrical coupling. Thus, high levels of Cx43 during skeletal muscle differentiation cause cell death. When, however, expression of Cx43 is delayed until after differentiation, using the MCK promoter, myotubes are viable and express gap junction proteins after grafting in the heart. This strategy may permit electrical coupling of skeletal and cardiac muscle for cardiac repair.     

On the influence of surface patterning on tissue self‐assembly and mechanics

Extracellular matrix assembly and composition influence the biological and mechanical functions of tissues. Developing strategies to control the spatial arrangement of cells and matrix is of central importance for tissue engineering‐related approaches relying on self‐assembling and scaffoldless processes. Literature reports demonstrated that signals patterned on material surfaces are able to control cell positioning and matrix orientation. However, the mechanisms underlying the interactions between material signals and the structure of the de novo synthesized matrix are far from being thoroughly understood. In this work, we investigated the ordering effect provided by nanoscale topographic patterns on the assembly of tissue sheets grown in vitro. We stimulated MC3T3‐E1 preosteoblasts to produce and assemble a collagen‐rich matrix on substrates displaying patterns with long‐ or short‐range order. Then, we investigated microstructural features and mechanical properties of the tissue in uniaxial tension. Our results demonstrate that patterned material surfaces are able to control the initial organization of cells in close contact to the surface; then cell‐generated contractile forces profoundly remodel tissue structure towards mechanically stable spatial patterns. Such a remodelling effect acts both locally, as it affects cell and nuclear shape and globally, by affecting the gross mechanical response of the tissue. Such an aspect of dynamic interplay between cells and the surrounding matrix must be taken into account when designing material platform for the in vitro generation of tissue with specific microstructural assemblies.     

Increasing circulating levels of Tenascin C in response to the Wingate anaerobic test

Aim

Tenascin C (TNC) is a large extracellular matrix glycoprotein. It is involved in development and upregulated both during tissue repair and in several pathological conditions, including cardiovascular disease. Extracellular matrix proteins play a role in promoting exercise responses, leading to adaptation, regeneration, and repair. The main goal of this study was to investigate whether a short anaerobic effort leads to increased levels of TNC in serum.

Methods

Thirty-nine healthy men performed a Wingate test followed by a muscle biopsy. Myoblasts were isolated from the muscle biopsies and differentiated to myotubes ex vivo. TNC RNA was quantified in the biopsies, myotubes and myoblasts using RNA sequencing. Blood samples were drawn before and 5 min after the Wingate test. Serum TNC levels were measured using enzyme-linked immunosorbent assay.

Results

After the Wingate test, serum TNC increased on average by 23% [15–33], median [interquartile range]; P_Wilcoxon < 0.0001. This increase is correlated with peak power output and power drop, but not with VO_2max. TNC RNA expression is higher in myoblasts and myotubes compared to skeletal muscle tissue.

Conclusion

TNC is secreted systemically as a response to the Wingate anaerobic test in healthy males. The response was positively correlated with peak power and power drop, but not with VO_2max which implicates a relation to mechanical strain and/or blood flow. With higher expression in undifferentiated myoblast cells than muscle tissue, it is likely that TNC plays a role in muscle tissue remodelling in humans. Our findings open for research on how TNC contributes to exercise adaptation.     

Biofunctional hydrogels for skeletal muscle constructs

Hydrogel scaffolds encapsulating C2C12 mouse skeletal muscle cells have been engineered as in vitro constructs towards regenerative medicine therapies for the enhancement and inducement of functional skeletal muscle formation. Previous work has largely involved two‐dimensional (2D) muscle strips, naturally occurring hydrogels and incomplete examination of the effects of the scaffold and/or biological functionalization on myogenic differentiation in a controllable manner. The goal of this study was to identify key properties in functionalized poly(ethylene glycol) (PEG)–maleimide (MAL) synthetic hydrogels that promote cell attachment, proliferation and differentiation for the formation of multinucleated myotubes and functional skeletal muscle tissue constructs. Significant differences in myoblast viability were observed as a function of cell seeding density, polymer weight percentage and bioadhesive ligands. The identified optimized conditions for cell survival, required for myotube development, were carried over for differentiation assays. PEG hydrogels (5% weight/volume), functionalized with 2.0 mm RGD adhesive peptide and crosslinked with protease‐cleavable peptides, incubated for 3 days before supplementation with 2% horse serum, significantly increased expression of differentiated skeletal muscle markers by 50%; 17% more multinucleated cells and a 40% increase in the number of nuclei/differentiated cell compared to other conditions. Functionality of cell‐laden hydrogels was demonstrated by a 20% decrease in the extruded length of the hydrogel when stimulated with a contractile agent, compared to 7% for a saline control. This study provided strategies to engineer a three‐dimensional (3D) microenvironment, using synthetic hydrogels to promote the development of differentiated muscle tissue from skeletal muscle progenitor cells to form contractile units. Copyright © 2014 John Wiley & Sons, Ltd.     

Microstructured human fibroblast‐derived extracellular matrix scaffold for vascular media fabrication

In the clinical and pharmacological fields, there is a need for the production of tissue‐engineered small‐diameter blood vessels. We have demonstrated previously that the extracellular matrix (ECM) produced by fibroblasts can be used as a scaffold to support three‐dimensional (3D) growth of another cell type. Thus, a resistant tissue‐engineered vascular media can be produced when such scaffolds are used to culture smooth muscle cells (SMCs). The present study was designed to develop an anisotropic fibroblastic ECM sheet that could replicate the physiological architecture of blood vessels after being assembled into a small diameter vascular conduit. Anisotropic ECM scaffolds were produced using human dermal fibroblasts, grown on a microfabricated substrate with a specific topography, which led to cell alignment and unidirectional ECM assembly. Following their devitalization, the scaffolds were seeded with SMCs. These cells elongated and migrated in a single direction, following a specific angle relative to the direction of the aligned fibroblastic ECM. Their resultant ECM stained for collagen I and III and elastin, and the cells expressed SMC differentiation markers. Seven days after SMCs seeding, the sheets were rolled around a mandrel to form a tissue‐engineered vascular media. The resulting anisotropic ECM and cell alignment induced an increase in the mechanical strength and vascular reactivity in the circumferential direction as compared to unaligned constructs. Copyright © 2016 John Wiley & Sons, Ltd.