Facile thermochemical conversion of FeOOH nanorods to ZnFe2O4 nanorods for high-rate lithium storage

We successfully prepared ZnFe₂O₄ nanorods (ZFO-NRs) by a simple thermochemical reaction of FeOOH nanorods with Zn(NO₃)₂ to use as an anode material in lithium-ion batteries. The FeOOH nanorod shape was well maintained after conversion into ZFO-NR with the formation of porous structures. The nanorod structure and porous morphology facilitate Li⁺ transport, improve the reaction rates owing to the larger contact area with the electrolyte, and reduce the mechanical stress during lithiation/delithiation. The ZFO-NR electrode exhibited a reversible capacity of 725 mA h g⁻¹ at 1 A g⁻¹ and maintained a capacity of 668 mA h g⁻¹ at 2 A g⁻¹; these capacities are much higher and more stable than those of ZFO nanoparticles prepared by a hydrothermal method (ZFO-HT) (216 and 117 mA h g⁻¹ at 1 and 2 A g⁻¹, respectively). Although ZFO-NRs exhibited high, stable capacities at moderate current densities for charging and discharging, the capacity rapidly decreased under fast charging/discharging conditions (>4 A g⁻¹). However, carbonized ZFO-NR (C/ZFO-NR) exhibited an improved reversible capacity and rate capability resulting from an increased conductivity compared with ZFO-NRs. The specific capacity of C/ZFO-NRs at 1 A g⁻¹ was 765 mA h g⁻¹; notably, a capacity of 680 mA h g⁻¹ was maintained at 6 A g⁻¹.

ZnFe₂O₄ nanorods were prepared by a simple thermochemical conversion of FeOOH nanorods, and exhibited an improved reversible capacity and rate capability.     

Surface phosphation of 3D mesoporous NiCo2O4 nanowire arrays as bifunctional anodes for lithium and sodium ion batteries

A novel surface phosphate strategy was adopted to dramatically improve the charge transport, ion diffusion, electroactive sites, and cycle stability of mesoporous NiCo₂O₄ nanowire arrays (NWAs), drastically boosting their electrochemical properties. Consequently, the as-prepared phosphated NiCo₂O₄ NWA (P-NiCo₂O₄ NWA) electrode achieved excellent energy storage performance as a bifunctional anode material for both lithium ion batteries (LIBs) and sodium ion batteries (SIBs). When evaluated as an anode for LIBs, this P-NiCo₂O₄ NWA electrode showed a high reversible capacity up to 1156 mA h g⁻¹ for 1500 cycles at 200 mA g⁻¹ without appreciable capacity attenuation, while in SIBs, the electrode could also deliver an admirable initial capacity as high as 687 mA h g⁻¹ and maintained 83.5% of this after 500 cycles at the same current density. Most important, when the current density increased from 100 to 1000 mA g⁻¹, the capacity retention was about 63% in LIBs and 54% in SIBs. This work may shed light on the engineering of efficient electrodes for multifunctional flexible energy storage device applications.

A novel surface phosphate strategy was adopted to dramatically improve the charge transport, ion diffusion, electroactive sites, and cycle stability of mesoporous NiCo₂O₄ nanowire arrays (NWAs), drastically boosting their electrochemical properties.     

Crystal-seeds induced construction of ZnO–ZnFe2O4 micro-cubic composites as excellent anode materials for lithium ion battery

This work aims at designing a fine assembly of two different transition metal oxides with a distinct band-gap energy into a bi-component-active hetero-structure to enhance the hetero-interface interactions and synergetic functionalities of bi-components to improve electrochemical performance. Herein, a facile marriage of crystal-seeds induction and hydrothermal reactions has been utilized to fabricate ZnO–ZnFe₂O₄ micro-cubic composites. Benefiting from the synergetic effects of the bi-functional components and their unique hetero-junction structure, the ZnO–ZnFe₂O₄ micro-cubic composites exhibit a significant improvement in lithium storage performance. The reversible capacity is retained at a value of 811 mA h g⁻¹ after 200 cycles at a current density of 100 mA g⁻¹. Even at high current densities of 1 and 5 A g⁻¹, the electrodes are still able to deliver capacities of 584 and 430 mA h g⁻¹ after 200 cycles, respectively.

This work aims at designing a fine assembly of two different transition metal oxides with a distinct band-gap energy into a bi-component-active hetero-structure to improve electrochemical performance.     

Sb2O3 nanoparticles anchored on N-doped graphene nanoribbons as improved anode for sodium-ion batteries

Sodium-ion batteries (SIBs) are emerging as a promising alternative to conventional lithium-ion technology, due to the abundance of sodium resources. Still, major drawbacks for the commercial application of SIBs lie in the slow kinetic processes and poor cycling performance of the devices. In this work, a hybrid nanocomposite of Sb₂O₃ nanoparticles anchored on N-doped graphene nanoribbons (GNR) is implemented as anode material in SIBs. The obtained Sb₂O₃/N-GNR anode delivers a reversible specific capacity of 642 mA h g⁻¹ after 100 cycles at 0.1 A g⁻¹ and exhibits a good rate capability. Even after 500 cycles at 5 A g⁻¹, the specific capacity is maintained at about 405 mA h g⁻¹. Such good Na storage performance is mainly ascribed to the beneficial effect of N doping for charge transfer and to the improved microstructure that facilitates the Na⁺ diffusion through the overall electrode.

A hybrid nanocomposite of Sb₂O₃ nanoparticles anchored on N-doped graphene nanoribbons is used as anode in SIBs. These hybrid electrodes demonstrate a high charge transfer and improved microstructure, facilitating the Na⁺ diffusion in the electrode.     

Electrochemical studies of a high voltage Na4Co3(PO4)2P2O7–MWCNT composite through a selected stable electrolyte

Cathode materials that operate at high voltages are required to realize the commercialization of high-energy-density sodium-ion batteries. In this study, we prepared different composites of sodium cobalt mixed-phosphate with multiwalled carbon nanotubes (Na₄Co₃(PO₄)₂P₂O₇–MWCNTs) by the sol–gel synthesis technique. The crystal structure and microstructure were characterized by using PXRD, TGA, Raman spectroscopy, SEM and TEM. The electrochemical properties of the Na₄Co₃(PO₄)₂P₂O₇–20 wt% MWCNT composite were explored using two different electrolytes. The composite electrode exhibited excellent cyclability and rate capabilities with the electrolyte composed of 1 M sodium hexafluorophosphate in ethylene carbonate:dimethyl carbonate (EC:DMC). The composite electrode delivered stable discharge capacities of 80 mA h g⁻¹ and 78 mA h g⁻¹ at room and elevated (55 °C) temperatures, respectively. The average discharge voltage was around 4.45 V versus Na⁺/Na, which corresponded to the Co^2+/3+ redox couple. The feasibility of the Na₄Co₃(PO₄)₂P₂O₇ cathode for sodium-ion batteries has been confirmed in real time using a full cell configuration vs. NaTi₂(PO₄)₃–20 wt% MWCNT, and it delivers an initial discharge capacity of 78 mA h g⁻¹ at 0.2C rate.

Na₄Co₃(PO₄)₂P₂O₇–MWCNT composites in 1 M NaPF₆ in EC:DMC electrolytes deliver stable discharge capacities of 80 mA h g⁻¹ and 78 mA h g⁻¹ at normal and elevated temperatures, respectively. In a full cell configuration vs. NaTi₂(PO₄)₃–MWCNT, they deliver an initial discharge capacity of 78 mA h g⁻¹ at 0.2C rate.     

A facile synthesis of CuSe nanosheets for high-performance sodium-ion hybrid capacitors

Due to the low price and abundant reserves of sodium resources, sodium-ion batteries have become the main candidate for the next generation of energy storage equipment, particularly for large-scale grid storage and low-speed electric vehicles. Transition metal selenides have attracted considerable attention because of their high reversible capacity, superior electrical conductivity and versatile structures. In this study, two-dimensional CuSe nanosheets are synthesized via a simple hydrothermal reaction. When acting as an electrode material for sodium-ion batteries, the CuSe electrode exhibits an initial coulombic efficiency of 96.7% at a current density of 0.1 A g⁻¹ and a specific capacity of 330 mA h g⁻¹ after 100 operation cycles, as well as retains a specific capacity of 211 mA h g⁻¹ even at a high current density of 10 A g⁻¹. Moreover, the anode delivers a specific capacity of 236 mA h g⁻¹ after 3300 cycles at 5 A g⁻¹ with a capacity retention of 91.2%. In sodium-ion hybrid capacitors (SHICs) with the two-dimensional CuSe nanosheets and Ti₃C₂T_x MXene as the negative and positive materials, respectively, the nanosheets without any pre-sodiation present a lifespan of up to 2000 cycles at 2 A g⁻¹ and a capacity retention of about 77.7%.

Due to the low price and abundant reserves of sodium resources, sodium-ion batteries have become the main candidate for the next generation of energy storage equipment, particularly for large-scale grid storage and low-speed electric vehicles.     

Rigid TiO2−x coated mesoporous hollow Si nanospheres with high structure stability for lithium-ion battery anodes

Rigid oxygen-deficient TiO_2−x coated mesoporous hollow Si nanospheres with a mechanically and electrically robust structure have been constructed through a facile method for high-performance Li-ion battery anodes. The mesoporous hollow structure provides enough inner void space for the expansion of Si. The oxygen-deficient TiO_2−x coating has functions in three aspects: (1) avoiding direct contact between Si and the electrolyte; (2) suppressing the outward expansion of the mesoporous hollow Si nanospheres; (3) improving the conductivity of the composite. The combined effect leads to high interfacial stability and structural integrity of both the material nanoparticles and the whole electrode. By virtue of the rational design, the composite yields a high reversible specific capacity of 1750.4 mA h g⁻¹ at 0.2 A g⁻¹, an excellent cycling stability of 1303.1 mA h g⁻¹ at 2 A g⁻¹ with 84.5% capacity retention after 500 cycles, and a high rate capability of 907.6 mA h g⁻¹ even at 4 A g⁻¹.

A conductive TiO_2−x shell suppresses the outward expansion of Si to maintain high interfacial stability and structural integrity.     

Double-layer carbon protected CoS2 nanoparticles as an advanced anode for sodium-ion batteries

Cobalt disulfides with high theoretical capacity are regarded as appropriate anode materials for sodium ion batteries (SIBs), but their intrinsically low conductivity and large volume expansion lead to a poor electrochemical performance. In this work, graphitic carbon coated CoS₂ nanoparticles are encapsulated in bamboo-like carbon nanotubes by pyrolysis and sulfidation process. Graphitic carbon can improve the electrical conductivity and prevent the agglomeration of CoS₂ nanoparticles. Meanwhile, bamboo-like carbon nanotubes can serve as conductive skeleton frames to provide rapid and constant transport pathways for electrons and offer void space to buffer the volume change of CoS₂ nanoparticles. The advanced anode material exhibits a long-term capacity of 432.6 mA h g⁻¹ at 5 A g⁻¹ after 900 cycles and a rate capability of 419.6 mA h g⁻¹ even at 10 A g⁻¹ in the carbonate ester-based electrolyte. This avenue can be applicable for preparing other metal sulfide/carbon anode materials for sodium-ion batteries.

The outstanding electrochemical performance is ascribed to the novel structure design of CoS₂@GC@B-CNT.     

Natural stibnite ore (Sb2S3) embedded in sulfur-doped carbon sheets: enhanced electrochemical properties as anode for sodium ions storage

Antimony sulfide (Sb₂S₃) has drawn widespread attention as an ideal candidate anode material for sodium-ion batteries (SIBs) due to its high specific capacity of 946 mA h g⁻¹ in conversion and alloy reactions. Nevertheless, volume expansion, a common flaw for conversion-alloy type materials during the sodiation and desodiation processes, is bad for the structure of materials and thus obstructs the application of antimony sulfide in energy storage. A common approach to solve this problem is by introducing carbon or other matrices as buffer material. However, the common preparation of Sb₂S₃ could result in environmental pollution and excessive energy consumption in most cases. To incorporate green chemistry, natural stibnite ore (Sb₂S₃) after modification via carbon sheets was applied as a first-hand material in SIBs through a facile and efficient strategy. The unique composites exhibited an outstanding electrochemical performance with a higher reversible capacity, a better rate capability, as well as an excellent cycling stability compared to that of the natural stibnite ore. In short, the study is expected to offer a new approach to improve Sb₂S₃ composites as an anode in SIBs and a reference for the development of natural ore as a first-hand material in energy storage.

Antimony sulfide (Sb₂S₃) has drawn widespread attention as an ideal candidate anode material for sodium-ion batteries (SIBs) due to its high specific capacity of 946 mA h g⁻¹ in conversion and alloy reactions.     

ZnSe nanoparticles dispersed in reduced graphene oxides with enhanced electrochemical properties in lithium/sodium ion batteries

A ZnSe-reduced graphene oxide (ZnSe-rGO) nanocomposite with ZnSe dispersed in rGO is prepared via a one-step hydrothermal method and applied as the anode materials for both lithium and sodium ion batteries (LIBs/SIBs). The as-prepared composite exhibits greatly enhanced reversible capacity, excellent cycling stability and rate capability (530 mA h g⁻¹ after 100 cycles at 500 mA g⁻¹ in LIBs, 259.5 mA h g⁻¹ after 50 cycles at the current density of 100 mA g⁻¹ in SIBs) compared with bare ZnSe in both lithium and sodium storage. The rGO plays an influential role in enhancing the conductivity of the nanocomposites, buffering the volume change and preventing the aggregation of ZnSe particles during the cycling process, thus securing the high structure stability and reversibility of the electrode.

ZnSe-rGO nanocomposite with ZnSe dispersed in reduced graphene oxides is studied as an anode for lithium and sodium ion batteries (LIBs/SIBs).     

Self-assembled hierarchical porous NiMn2O4 microspheres as high performance Li-ion battery anodes

Hierarchical structured porous NiMn₂O₄ microspheres assembled with nanorods are synthesized through a simple hydrothermal method followed by calcination in air. As anode materials for lithium ion batteries (LIBs), the NiMn₂O₄ microspheres exhibit a high specific capacity. The initial discharge capacity is 1126 mA h g⁻¹. After 1000 cycles, the NiMn₂O₄ demonstrates a reversible capacity of 900 mA h g⁻¹ at a current density of 500 mA g⁻¹. In particular, the porous NiMn₂O₄ microspheres still could deliver a remarkable discharge capacity of 490 mA h g⁻¹ even at a high current density of 2 A g⁻¹, indicating their potential application in Li-ion batteries. This excellent electrochemical performance is ascribed to the unique hierarchical porous structure which can provide sufficient contact for the transfer of Li⁺ ion and area for the volume change of the electrolyte leading to enhanced Li⁺ mobility.

Hierarchical structured porous NiMn₂O₄ microspheres assembled with nanorods are synthesized through a simple hydrothermal method followed by calcination in air.     

Preparation and lithium storage of core–shell honeycomb-like Co3O4@C microspheres

Core–shell honeycomb-like Co₃O₄@C microspheres were synthesized via a facile solvothermal method and subsequent annealing treatment under an argon atmosphere. Owing to the core–shell honeycomb-like structure, a long cycling life was achieved (a high reversible specific capacity of 318.9 mA h g⁻¹ was maintained at 5C after 1000 cycles). Benefiting from the coated carbon layers, excellent rate capability was realized (a reversible specific capacity as high as 332.6 mA h g⁻¹ was still retained at 10C). The design of core–shell honeycomb-like microspheres provides a new idea for the development of anode materials for high-performance lithium-ion batteries.

The reversible specific capacity of CSHCo₃O₄@C microspheres was as high as 332.6 mA h g⁻¹ at 10C, which was significantly higher than that of SCo₃O₄ microspheres (68.7 mA h g⁻¹).     

Hydrothermal-template synthesis and electrochemical properties of Co3O4/nitrogen-doped hemisphere-porous graphene composites with 3D heterogeneous structure

Despite the high capacity of Co₃O₄ employed in lithium-ion battery anodes, the reduced conductivity and grievous volume change of Co₃O₄ during long cycling of insertion/extraction of lithium-ions remain a challenge. Herein, an optimized nanocomposite, Co₃O₄/nitrogen-doped hemisphere-porous graphene composite (Co₃O₄/N-HPGC), is synthesized by a facile hydrothermal-template approach with polystyrene (PS) microspheres as a template. The characterization results demonstrate that Co₃O₄ nanoparticles are densely anchored onto graphene layers, nitrogen elements are successfully introduced by carbamide and the nanocomposites maintain the hemispherical porous structure. As an anode material for lithium-ion batteries, the composite material not only maintains a relatively high lithium storage capacity (the first discharge specific capacity can reach 2696 mA h g⁻¹), but also shows significantly improved rate performance (1188 mA h g⁻¹ at 0.1 A g⁻¹, 344 mA h g⁻¹ at 5 A g⁻¹) and enhanced cycling stability (683 mA h g⁻¹ after 500 cycles at 1 A g⁻¹). The enhanced electrochemical properties of Co₃O₄/N-HPGC nanocomposites can be ascribed to the synergistic effects of Co₃O₄ nanoparticles, novel hierarchical structure with hemisphere-pores and nitrogen-containing functional groups of the nanomaterials. Therefore, the developed strategy can be extended as a universal and scalable approach for integrating various metal oxides into graphene-based materials for energy storage and conversion applications.

The Co₃O₄/N-HPGC nanocomposites synthesized by a hydrothermal-template approach with polystyrene microspheres as the template possess excellent electrochemical performance.     

Performance optimization of freestanding MWCNT-LiFePO4 sheets as cathodes for improved specific capacity of lithium-ion batteries

The typical lithium-ion-battery positive electrode of “lithium-iron phosphate (LiFePO₄) on aluminum foil” contains a relatively large amount of inactive materials of 29 wt% (22 wt% aluminum foil + 7 wt% polymeric binder and graphitic conductor) which limits its maximum specific capacity to 120.7 mA h g⁻¹ (71 wt% LiFePO₄) instead of 170 mA h g⁻¹ (100 wt% LiFePO₄). We replaced the aluminum current-collector with a multi-walled carbon nanotube (MWCNT) network. We optimized the specific capacity of the “freestanding MWCNT-LiFePO₄” positive electrode. Through the optimization of our unique surface-engineered tape-cast fabrication method, we demonstrated the amount of LiFePO₄ active materials can be as high as 90 wt% with a small amount of inactive material of 10 wt% MWCNTs. This translated to a maximum specific capacity of 153 mA h g⁻¹ instead of 120.7 mA h g⁻¹, which is a significant 26.7% gain in specific capacity compared to conventional cathode design. Experimental data of the freestanding MWCNT-LiFePO₄ at a low discharge rate of 17 mA g⁻¹ show an excellent specific capacity of 144.9 mA h g⁻¹ which is close to its maximum specific capacity of 153 mA h g⁻¹. Furthermore, the freestanding MWCNT-LiFePO₄ has an excellent specific capacity of 126.7 mA h g⁻¹ after 100 cycles at a relatively high discharge rate of 170 mA g⁻¹ rate.

We optimized the specific capacity of freestanding MWCNT-LiFePO₄ positive electrode. We demonstrated as high (low) as 90 wt% LiFePO₄ active material (10 wt% MWCNTs inactive material). This corresponded to a maximum specific capacity of 153 mA h g⁻¹.     

A comparison study of MnO2 and Mn2O3 as zinc-ion battery cathodes: an experimental and computational investigation

The high specific capacity, low cost and environmental friendliness make manganese dioxide materials promising cathode materials for zinc-ion batteries (ZIBs). In order to understand the difference between the electrochemical behavior of manganese dioxide materials with different valence states, i.e., Mn(iii) and Mn(iv), we investigated and compared the electrochemical properties of pure MnO₂ and Mn₂O₃ as ZIB cathodes via a combined experimental and computational approach. The MnO₂ electrode showed a higher discharging capacity (270.4 mA h g⁻¹ at 0.1 A g⁻¹) and a superior rate performance (125.7 mA h g⁻¹ at 3 A g⁻¹) than the Mn₂O₃ electrode (188.2 mA h g⁻¹ at 0.1 A g⁻¹ and 87 mA h g⁻¹ at 3 A g⁻¹, respectively). The superior performance of the MnO₂ electrode was ascribed to its higher specific surface area, higher electronic conductivity and lower diffusion barrier of Zn²⁺ compared to the Mn₂O₃ electrode. This study provides a detailed picture of the diversity of manganese dioxide electrodes as ZIB cathodes.

MnO₂ and Mn₂O₃ cathodes for zinc ion batteries were experimentally and computationally explored.     

Preparation of Sn-aminoclay (SnAC)-templated Fe3O4 nanoparticles as an anode material for lithium-ion batteries

Sn-aminoclay (SnAC)-templated Fe₃O₄ nanocomposites (SnAC–Fe₃O₄) were prepared through a facile approach. The morphology and macro-architecture of the fabricated SnAC–Fe₃O₄ nanocomposites were characterized by different techniques. A constructed meso/macro-porous structure arising from the homogeneous dispersion of Fe₃O₄ NPs on the SnAC surface owing to inherent NH₃⁺ functional groups provides new conductive channels for high-efficiency electron transport and ion diffusion. After annealing under argon (Ar) gas, most of SnAC layered structure can be converted to SnO₂; this carbonization allows for formation of a protective shell preventing direct interaction of the inner SnO₂ and Fe₃O₄ NPs with the electrolyte. Additionally, the post-annealing formation of Fe–O–C and Sn–O–C bonds enhances the connection of Fe₃O₄ NPs and SnAC, resulting in improved electrical conductivity, specific capacities, capacity retention, and long-term stability of the nanocomposites. Resultantly, electrochemical measurement exhibits high initial discharge/charge capacities of 980 mA h g⁻¹ and 830 mA h g⁻¹ at 100 mA g⁻¹ in the first cycle and maintains 710 mA h g⁻¹ after 100 cycles, which corresponds to a capacity retention of ∼89%. The cycling performance at 100 mA g⁻¹ is remarkably improved when compared with control SnAC. These outstanding results represent a new direction for development of anode materials without any binder or additive.

Sn-aminoclay (SnAC)/Fe₃O₄ NPs – a promising hybrid electrode to offer great electrochemical performance with a high initial discharge of 980 mA h g⁻¹ and good capacity retention of 89% after 100 cycles.     

Off-stoichiometric Na3−3xV2+x(PO4)3/C nanocomposites as cathode materials for high-performance sodium-ion batteries prepared by high-energy ball milling

Na₃V₂(PO₄)₃ (NVP) is regarded as a promising cathode material for sustainable energy storage applications. Here we present an efficient method to synthesize off-stoichiometric Na_3−3xV_2+x(PO₄)₃/C (x = 0–0.10) nanocomposites with excellent high-rate and long-life performance for sodium-ion batteries by high-energy ball milling. It is found that Na_3−3xV_2+x(PO₄)₃/C nanocomposites with x = 0.05 (NVP-0.05) exhibit the most excellent performance. When cycled at a rate of 1C in the range of 2.3–3.9 V, the initial discharge capacity of NVP-0.05 is 112.4 mA h g⁻¹, which is about 96% of its theoretical value (117.6 mA h g⁻¹). Even at 20C, it still delivers a discharge capacity of 92.3 mA h g⁻¹ (79% of the theoretical capacity). The specific capacity of NVP-0.05 is as high as 100.7 mA h g⁻¹ after 500 cycles at 5C, which maintains 95% of its initial value (106 mA h g⁻¹). The significantly improved electrochemical performance of NVP-0.05 is attributed to the decrease of internal resistance and increase of the Na⁺ ion diffusion coefficient.

Na₃V₂(PO₄)₃ (NVP) is regarded as a promising cathode material for sustainable energy storage applications.     

Synthesis and electrochemical performance of NaV3O8 nanobelts for Li/Na-ion batteries and aqueous zinc-ion batteries

NaV₃O₈ nanobelts were successfully synthesized for Li/Na-ion batteries and rechargeable aqueous zinc-ion batteries (ZIBs) by a facile hydrothermal reaction and subsequent thermal transformation. Compared to the electrochemical performance of LIBs and NIBs, NaV₃O₈ nanobelt cathode materials in ZIBs have shown excellent electrochemical performance, including high specific capacity of 421 mA h g⁻¹ at 100 mA g⁻¹ and good cycle stability with a capacity retention of 94% over 500 cycles at 5 A g⁻¹. The good diffusion coefficients and high surface capacity of NaV₃O₈ nanobelts in ZIBs were in favor of fast Zn²⁺ intercalation and long-term cycle stability.

Compared to the electrochemical performance for LIBs and NIBs, NaV₃O₈ nanobelts electrode for ZIBs shows excellent electrochemical performance, including high specific capacity of 421 mA h g⁻¹ at 100 mA g⁻¹, good rate performance and cycle performance.     

Synthesis of hierarchical Sn/SnO nanosheets assembled by carbon-coated hollow nanospheres as anode materials for lithium/sodium ion batteries

Tin-based anode materials have aroused interest due to their high capacities. Nevertheless, the volume expansion problem during lithium insertion/extraction processes has severely hindered their practical application. In particular, nano–micro hierarchical structure is attractive with the integrated advantages of nano-effect and high thermal stability of the microstructure. Herein, hierarchical Sn/SnO nanosheets assembled by carbon-coated hollow nanospheres were successfully synthesized by a facile glucose-assisted hydrothermal method, in which the glucose served as both morphology-control agent and carbon source. The hierarchical Sn/SnO nanosheets exhibit excellent electrochemical performances owing to the unique configuration and carbon coating. Specifically, a reversible high capacity of 2072.2 mA h g⁻¹ was observed at 100 mA g⁻¹. Further, 964.1 mA h g⁻¹ after 100 cycles at 100 mA g⁻¹ and 820.4 mA h g⁻¹ at 1000 mA g⁻¹ after 300 cycles could be obtained. Encouragingly, the Sn/SnO also presents certain sodium ion storage properties. This facile synthetic strategy may provide new insight into fabricating high-performance Sn-based anode materials combining the advantages of both structure and carbon coating.

Hierarchical Sn/SnO nanosheets assembled by carbon-coated hollow nanospheres with promising lithium and sodium storage performances.     

NaV6O15 microflowers as a stable cathode material for high-performance aqueous zinc-ion batteries

Reversible aqueous zinc-ion batteries (ZIBs) have great potential for large-scale energy storage owing to their low cost and safety. However, the lack of long-lifetime positive materials severely restricts the development of ZIBs. Herein, we report NaV₆O₁₅ microflowers as a cathode material for ZIBs with excellent electrochemical performance, including a high specific capacity of ∼300 mA h g⁻¹ at 100 mA g⁻¹ and 141 mA h g⁻¹ maintained after 2000 cycles at 5 A g⁻¹ with a capacity retention of ∼107%. The high diffusion coefficient and stable tunneled structure of NaV₆O₁₅ facilitate Zn²⁺ intercalation/extraction and long-term cycle stability.

NaV₆O₁₅ microflowers were synthesized as a stable cathode material for aqueous zinc ion batteries, which show a high specific capacity and excellent long-term cycling performance.