Compatibility of ondansetron hydrochloride and methylprednisolone sodium succinate in multilayer polyolefin containers.

PURPOSE: The compatibility of ondansetron hydrochloride and methylprednisolone sodium succinate in 5% dextrose injection and 0.9% sodium chloride injection was studied. METHODS: Test solutions of ondansetron hydrochloride 0.16 mg/mL and methylprednisolone sodium succinate 2.4 mg/mL were prepared in triplicate and tested in duplicate. Total volumes of 4 and 2 mL of ondansetron hydrochloride solution and methylprednisolone sodium succinate solution, respectively, were added to 50-mL multilayer polyolefin bags containing 5% dextrose injection or 0.9% sodium chloride injection. Bags were stored for 24 hours at 20-25 degrees C and for 48 hours at 4-8 degrees C. Chemical compatibility was measured with high-performance liquid chromatography, and physical compatibility was determined visually. RESULTS: Ondansetron hydrochloride was stable for up to 24 hours at 20-25 degrees C and up to 48 hours at 4-8 degrees C. Methylprednisolone sodium succinate was stable for up to 48 hours at 4-8 degrees C. When stored at 20-25 degrees C, methylprednisolone sodium succinate was stable for up to 7 hours in 5% dextrose injection and up to 24 hours in 0.9% sodium chloride injection. Compatibility data for solutions containing ondansetron hydrochloride plus methylprednisolone sodium succinate revealed that each drug was stable for up to 24 hours at 20-25 degrees C and up to 48 hours at 4-8 degrees C. CONCLUSION: Ondansetron 0.16 mg/mL (as the hydrochloride) and methylprednisolone 2.4 mg/mL (as the sodium succinate) mixed in 50-mL multilayer polyolefin bags were stable in both 5% dextrose injection and 0.9% sodium chloride injection for up to 24 hours at 20-25 degrees C and up to 48 hours at 4-8 degrees C.     

Stability of meropenem in polyvinyl chloride bags and an elastomeric infusion device.

PURPOSE: The stability of meropenem in i.v. solutions stored in polyvinyl chloride (PVC) bags and an elastomeric infusion device at concentrations commonly used in home care was studied. METHODS: Vials of meropenem were reconstituted with sterile water for injection and mixed with 0.9% sodium chloride injection (NS) to yield concentrations of 4, 10, and 20 mg/mL. Six replicate solutions were prepared in PVC containers and six in the Homepump ECLIPSE elastomeric infusion device. All solutions were stored at an average temperature of 5 degrees C and sampled immediately after preparation and at intervals up to 120 hours (five days); the 4-mg/mL solution was also sampled at 144 and 168 hours (seven days). Samples were assayed for meropenem concentration by stability-indicating high-performance liquid chromatography. RESULTS: All solutions of meropenem retained over 90% of the initial drug concentration at five days. The 4-mg/mL solutions retained over 93% of the initial concentration at seven days. The rate of meropenem decay did not differ significantly between PVC and elastomeric infusion containers for the 4- and 20-mg/mL solutions; however, there was a difference for the 10-mg/mL solutions. CONCLUSION: Meropenem 4 mg/mL in NS was stable for at least seven days in PVC bags and elastomeric infusion containers when stored at 5 degrees C, and meropenem 10 and 20 mg/mL in NS was stable for at least five days in both containers at 5 degrees C.     

Stability of fumagillin in an extemporaneously prepared ophthalmic solution.

The stability of fumagillin 70 microg/mL (as the bicyclohexylammonium crystal) in an extemporaneously prepared ophthalmic solution was studied. An ophthalmic solution of fumagillin 70 microg/mL was prepared by combining 120 mg of fumagillin bicyclohexylammonium crystals with 20 mL of 0.9% Sodium Chloride Injection, USP, and 20 mL of an ophthalmic irrigating solution. The solution was stored in 12 sterile semi-opaque dropper bottles; 4 bottles were stored at 25 degrees C exposed to light, 4 were stored at 25 degrees C in the dark, and 4 were stored at 4 degrees C in the dark. Samples were taken on days 0, 7, 14, 21, and 28 and analyzed by high-performance liquid chromatography. Sterility was tested as well. In the solutions stored at 25 degrees C, 17-30% of the initial drug concentration was lost during the first week. The solution protected from light and stored at 4 degrees C lost about 12% of active drug by week 4. There was no change in color or odor in any of the solutions and only a minor change in pH over the study period. There was no evidence of microbial growth in any of the solutions tested. Fumagillin 70 microg/mL (as the bicyclohexylammonium crystal) in 0.9% sodium chloride injection and an ophthalmic irrigating solution containing benzalkonium chloride was stable in the dark for 14 days at 4 degrees C.     

Stability of intravenous admixtures of aztreonam and cefoxitin, gentamicin, metronidazole, or tobramycin

The stability of aztreonam and cefoxitin, gentamicin, metronidazole, or tobramycin in intravenous admixtures containing aztreonam and one of the other drugs was studied. Admixtures of aztreonam and gentamicin, aztreonam and tobramycin, and aztreonam and cefoxitin were each prepared in four different concentrations in both 0.9% sodium chloride injection and 5% dextrose injection. Admixtures of aztreonam and metronidazole were prepared in two different concentrations using a commercially available solution of metronidazole 5 mg/mL in a phosphate-citrate buffer. One of each of these admixtures was stored at 25 degrees C for 48 hours and at 4 degrees C for seven days. At various storage times, 1-mL samples of the admixtures were tested for pH and assayed using high-performance liquid chromatography or fluorescence polarization immunoassay. The pH of all admixtures except admixtures of aztreonam and cefoxitin decreased only slightly during storage. Concentrations of aztreonam and tobramycin under both storage conditions decreased by less than 10%. Concentrations of cefoxitin and aztreonam decreased by more than 10% at 25 degrees C, and concentrations of gentamicin decreased by more than 10% under both storage conditions. Visual inspection of admixtures of aztreonam and metronidazole revealed an incompatibility between the two drugs, as evidenced by the appearance of a cherry-red color. Admixtures of aztreonam 10 and 20 mg/mL and tobramycin 0.2 and 0.8 mg/mL in 5% dextrose injection or 0.9% sodium chloride injection are stable for 48 hours at 25 degrees C or seven days at 4 degrees C. Admixtures of aztreonam 10 and 20 mg/mL and gentamicin 0.2 and 0.8 mg/mL in 5% dextrose injection or 0.9% sodium chloride injection are stable for eight hours at 25 degrees C and 24 hours at 4 degrees C. Admixtures of aztreonam 10 and 20 mg/mL and cefoxitin 10 and 20 mg/mL in 5% dextrose injection or 0.9% sodium chloride injection are stable for 12 hours at 25 degrees C and seven days at 4 degrees C. Aztreonam and metronidazole should be administered separately.     

Physical and chemical stability of gemcitabine hydrochloride solutions.

OBJECTIVE: To evaluate the physical and chemical stability of gemcitabine hydrochloride (Gemzar-Eli Lilly and Company) solutions in a variety of solution concentrations, packaging, and storage conditions. DESIGN: Controlled experimental trial. SETTING: Laboratory. INTERVENTIONS: Test conditions included (1) reconstituted gemcitabine at a concentration of 38 mg/mL as the hydrochloride salt in 0.9% sodium chloride or sterile water for injection in the original 200 mg and 1 gram vials; (2) reconstituted gemcitabine 38 mg/mL as the hydrochloride salt in 0.9% sodium chloride injection packaged in plastic syringes; (3) diluted gemcitabine at concentrations of 0.1 and 10 mg/mL as the hydrochloride salt in polyvinyl chloride (PVC) minibags of 0.9% sodium chloride injection and 5% dextrose injection; and (4) gemcitabine 0.1, 10, and 38 mg/mL as the hydrochloride salt in 5% dextrose in water and 0.9% sodium chloride injection as simulated ambulatory infusions at 32 degrees C. Test samples of gemcitabine hydrochloride were prepared in the concentrations, solutions, and packaging required. MAIN OUTCOME MEASURES: Physical and chemical stability based on drug concentrations initially and after 1, 3, and 7 days of storage at 32 degrees C and after 1, 7, 14, 21, and 35 days of storage at 4 degrees C and 23 degrees C. RESULTS: The reconstituted solutions at a gemcitabine concentration of 38 mg/mL as the hydrochloride salt in the original vials occasionally exhibited large crystal formation when stored at 4 degrees C for 14 days or more. These crystals did not redissolve upon warming to room temperature. All other samples were physically stable throughout the study. Little or no change in particulate burden or the presence of haze were found. Gemcitabine as the hydrochloride salt in the solutions tested was found to be chemically stable at all concentrations and temperatures tested that did not exhibit crystallization. Little or no loss of gemcitabine occurred in any of the samples throughout the entire study period. However, refrigerated vials that developed crystals also exhibited losses of 20% to 35% in gemcitabine content. Exposure to or protection from light did not alter the stability of gemcitabine as the hydrochloride salt in the solutions tested. CONCLUSION: Reconstituted gemcitabine as the hydrochloride salt in the original vials is chemically stable at room temperature for 35 days but may develop crystals when stored at 4 degrees C. The crystals do not redissolve upon warming. Gemcitabine prepared as intravenous admixtures of 0.1 and 10 mg/mL as the hydrochloride salt in 5% dextrose injection and 0.9% sodium chloride injection in PVC bags and as a solution of 38 mg/mL in 0.9% sodium chloride injection packaged in plastic syringes is physically and chemically stable for at least 35 days at 4 degrees C and 23 degrees C. Gemcitabine as the hydrochloride salt is stable for at least 7 days at concentrations of 0.1, 10, and 38 mg/mL in 5% dextrose injection and 0.9% sodium chloride injection stored at 32 degrees C during simulated ambulatory infusion.     

Stability of ondansetron hydrochloride in injectable solutions at -20, 5, and 25 degrees C.

The stability of ondansetron hydrochloride in 5% dextrose injection and in 0.9% sodium chloride injection when stored frozen, refrigerated, and at room temperature was studied. Solutions of ondansetron 0.03 and 0.3 mg/mL (as the hydrochloride salt) were prepared by adding 1.5 or 15 mg of the drug to 50-mL minibags containing 5% dextrose injection or 0.9% sodium chloride injection. All solutions were prepared in triplicate, and each container was tested in duplicate. Testing at the time of preparation and at each subsequent test interval included visual inspection of color and clarity, determination of pH, and a stability-indicating high-performance liquid chromatographic assay to measure the ondansetron concentration. Conditions assessed included storage at -20 degrees C for two weeks to three months, 5 degrees C for 7-14 days, approximately 25 degrees C for up to 48 hours, and various combinations of these conditions. The concentration of ondansetron in each solution remained above 90% of the original concentration at each observation time under all storage conditions. No changes in color or clarity were observed, and there were only minor changes in pH. Ondansetron 0.03 and 0.3 mg/mL in 5% dextrose injection or 0.9% sodium chloride injection was stable when stored (1) for up to three months at -20 degrees C, followed by up to 14 days at 5 degrees C and by 48 hours at 25 degrees C and (2) for up to 14 days at 5 degrees C, followed by up to 48 hours at 25 degrees C.     

Stability of intravenous admixtures containing aztreonam and cefazolin

The stability of aztreonam and cefazolin in intravenous admixtures was studied. Each of the following combinations of drugs was added to both 5% dextrose injection and 0.9% sodium chloride injection in polyvinyl chloride containers: aztreonam 20 mg/mL and cefazolin 20 mg/mL (as the sodium salt); aztreonam 10 mg/mL and cefazolin 5 mg/mL; aztreonam 20 mg/mL and cefazolin 5 mg/mL; and aztreonam 10 mg/mL and cefazolin 20 mg/mL. One of each of these admixtures was stored at 23-25 degrees C for 48 hours and at 4-5 degrees C for seven days. At various storage times the admixtures were inspected for visual changes, and 1-mL samples were tested for pH and assayed using a stability-indicating high-performance liquid chromatographic assay. No visual changes were observed, and changes in pH were negligible. Concentrations of aztreonam and cefazolin under both storage conditions decreased by less than 3%. Intravenous admixtures of aztreonam and cefazolin at the concentrations studied are stable for at least 48 hours at 23-25 degrees C and for seven days at 4-5 degrees C.     

Stability of ceftazidime (with arginine) stored in plastic syringes at three temperatures.

The stability of ceftazidime (with arginine) stored in plastic syringes at three temperatures was studied. Ceftazidime (with arginine) was reconstituted with sterile water for injection to a concentration of 100 mg/mL and transferred to plastic syringes. Syringes were stored at 22 degrees C for 24 hours; at 4 degrees C for 7 or 10 days, then at 22 degrees C for 24 hours; or at -20 degrees C for 91 days, then at 22 degrees C for 24 hours or at 4 degrees C for seven days followed by 22 degrees C for 24 hours. Ceftazidime concentration was measured at various times by using a stability-indicating high-performance liquid chromatographic method. At each sampling time, each syringe was visually inspected and the pH of each solution was measured. Mean ceftazidime concentration remained > 90% of initial concentration at all storage conditions. Although during storage the color of the solutions changed from light straw to dark yellow and the pH decreased, no precipitate was visually detected and no peaks for degradation products appeared on the chromatograms. Ceftazidime 100 mg/mL (with arginine) in sterile water for injection was stable when stored in plastic syringes for up to 24 hours at 22 degrees C, for 10 days at 4 degrees C followed by up to 24 hours at 22 degrees C, and for 91 days at -20 degrees C followed by up to 24 hours at 22 degrees C or by 7 days at 4 degrees C and up to 24 hours at 22 degrees C.     

Stability of ceftazidime (with arginine) and of cefuroxime sodium in infusion-pump reservoirs.

The stability of ceftazidime (with arginine) and cefuroxime sodium was studied after storage in infusion-pump reservoirs at freezing and refrigerated temperatures and subsequent simulated administration over 24 hours at near-body temperature. Polyvinyl chloride reservoirs and glass vials were filled with ceftazidime (with arginine) or cefuroxime sodium at various concentrations, diluted in sterile water. Three reservoirs each of ceftazidime 30 and 60 mg/mL and of cefuroxime 22.5, 30, 45, and 60 mg/mL were stored for various times and at various temperatures. Three glass vials each of ceftazidime or cefuroxime 30 and 60 mg/mL were stored for 30 days at -20 degrees C, followed by 4 days at 3 degrees C and 24 hours at 30 degrees C. Samples obtained periodically during storage and during simulated administration were analyzed with high-performance liquid chromatography. Both drugs maintained at least 90% of their initial concentration under all of the test conditions except simulated administration at 30 degrees C, during which degradation accelerated. In portable infusion-pump reservoirs, ceftazidime 30 and 60 mg/mL and cefuroxime 30 and 60 mg/mL were stable for 30 days at -20 degrees C followed by 4 days at 3 degrees C; ceftazidime 30 and 60 mg/mL was stable for 10 days at 3 degrees C; and cefuroxime 22.5 and 45 mg/mL was stable for 7 days at 3 degrees C. However, the drugs may need to be administered over less than 24 hours when the pump reservoir is worn on the patient's body.     

Stability and preservative effectiveness of treprostinil sodium after dilution in common intravenous diluents.

The stability of treprostinil sodium after dilution in three common i.v. infusion vehicles was assessed. The chemical stability of treprostinil sodium was tested over a 48-hour period at 40 degrees C and 75% relative humidity after dilution in each of three diluents: sterile water for injection, 0.9% sodium chloride injection, and 5% dextrose injection, and after passage through an i.v. delivery system. Chemical analysis was conducted by using a validated stability-indicating high-performance liquid chromatographic assay, visually inspecting the solutions, and measuring the pH of each solution. The preservative effectiveness of the solutions was tested by the recovery of inoculations of compendial microorganisms after 48 hours in dilute solutions of treprostinil sodium. All assay results for treprostinil were within 90.0% to 110.0% of the prepared solutions diluted at 0.004 and 0.13 mg/mL treprostinil sodium in sterile water for injection and 0.9% sodium chloride injection. The assay results were the same for dilute treprostinil solutions in 5% dextrose injection at concentrations of 0.02 and 0.13 mg/mL. The pH values for these solutions remained within acceptable values of 6.0 to 7.2 for the stability study. No change in physical appearance or any visible particulate matter was observed. Approximately 70% of metacresol, the preservative, in the dilute treprostinil sodium solutions was removed before reaching the terminal end of the tubing. None of the dilute treprostinil sodium solutions supported microbial growth in the cassette reservoirs for the organisms considered. Treprostinil sodium 0.13 mg/mL solution in sterile water for injection, 0.9% sodium chloride for injection, and 5% dextrose for injection appeared to be stable after storage in controlled ambulatory drug-delivery systems for 48 hours at 40 degrees C and 75% relative humidity. Treprostinil sodium 0.004 mg/mL in sterile water and 0.9% sodium chloride for injection and 0.02 mg/mL in 5% dextrose injection was also stable under the same conditions. None of the solutions showed signs of microbial growth.     

Stability of ceftazidime and amino acids in parenteral nutrient solutions

The stability of ceftazidime was studied under conditions simulating administration via a Y-injection site into a primary infusion of parenteral nutrient (PN) solution; the stabilities of ceftazidime and amino acids when the drug was added directly to PN solutions were also studied. Three PN solutions containing 25% dextrose were used; the amino acid contents were 0, 2.5%, and 5%. Ceftazidime with sodium carbonate was used to prepare stock solutions of ceftazidime 40 mg/mL in both 0.9% sodium chloride injection and 5% dextrose injection; to simulate Y-site injection, samples were added to the three PN solutions to achieve ceftazidime concentrations of 10 and 20 mg/mL, or 1:1 and 1:3 ratios of drug solution to PN solution. Samples of these admixtures were assayed by high-performance liquid chromatography (HPLC) initially and after room-temperature (22 degrees C) storage for one and two hours. Additional solutions were prepared by adding sterile water for injection to ceftazidime with sodium carbonate; drug solutions were added to each PN solution in polyvinyl chloride bags to achieve ceftazidime concentrations of 1 and 6 mg/mL. The samples were assayed by HPLC for ceftazidime concentration after storage at 22 degrees C for 3, 6, 12, 24, and 36 hours and at 4 degrees C for 1, 3, 7, and 14 days. Amino acid stability was analyzed in admixtures containing 5% amino acids and ceftazidime 6 mg/mL after 24 and 48 hours at 22 degrees C and after 7 and 10 days at 4 degrees C.(ABSTRACT TRUNCATED AT 250 WORDS)     

Stability of ceftazidime in plastic syringes and glass vials under various storage conditions.

The stability of ceftazidime solutions (100 and 200 mg/mL) in plastic syringes and glass vials under various storage conditions was examined. Solutions of ceftazidime 100 and 200 mg/mL in sterile water were placed in polypropylene plastic syringes or glass vials and stored (1) at 21-23 degrees C for up to 8 hours, (2) at 4 degrees C for up to 96 hours, (3) at -20 degrees C for 28 days and then 21-23 degrees C for up to 8 hours, (4) at -20 degrees C for 28 days and then 4 degrees C for up to 96 hours, (5) at -20 degrees C for 91 days and then 21-23 degrees C for up to 8 hours, or (6) at-20 degrees C for 91 days and then 4 degrees C for up to 96 hours. Samples were withdrawn from each syringe and vial at designated times and assayed by high-performance liquid chromatography. Solutions were judged to be stable if drug concentrations remained above 90% of the initial values. The number of particles in each container under each storage condition was also evaluated. Ceftazidime was stable under all storage conditions. In all containers, particulate matter was within USP specifications for small-volume injections, with no change in particle count as a result of the freezing and thawing. Ceftazidime in sterile water in either glass vials or plastic syringes is stable for 8 hours at room temperature or 96 hours at 4 degrees C when such storage occurs (1) immediately after constitution, (2) after 28 days of frozen storage, or (3) after 91 days of frozen storage.     

Stability of intravenous admixtures of aztreonam and ampicillin

The stability of aztreonam and ampicillin in intravenous admixtures containing both drugs was studied. Each of the following drugs and combinations of drugs was added to both 5% dextrose injection and 0.9% sodium chloride injection: aztreonam 10 and 20 mg/mL, ampicillin sodium 5 and 20 mg/mL, aztreonam 20 mg/mL and ampicillin sodium 20 mg/mL, aztreonam 20 mg/mL and ampicillin sodium 5 mg/mL, aztreonam 10 mg/mL and ampicillin sodium 20 mg/mL, and aztreonam 10 mg/mL and ampicillin sodium 5 mg/mL. One of each of these admixtures was stored at 25 degrees C for 48 hours and 4 degrees C for seven days. At various storage times the admixtures were inspected for visual changes and 2-mL samples were examined microscopically for crystalline and particulate matter, tested for pH, and assayed by high-performance liquid chromatography. No visual changes were observed. In the two-drug solutions, pH was influenced by concentrations of the two drugs and stability of the drugs was influenced by the solution pH. The pH of single-drug aztreonam admixtures did not change during storage, but the pH of single-drug and two-drug admixtures containing ampicillin decreased. In single-drug admixtures, aztreonam loss under both storage conditions was less than 10% but ampicillin loss was more than 10% in 0.9% sodium chloride injection and more than 50% in 5% dextrose injection. The stability of ampicillin was increased in the presence of aztreonam, and the stability of aztreonam was decreased in the presence of ampicillin.(ABSTRACT TRUNCATED AT 250 WORDS)     

Compatibility of imipenem-cilastatin sodium with commonly used intravenous solutions

The stability of imipenem-cilastatin sodium (Primaxin, Merck Sharp & Dohme) in various intravenous fluids was determined after storage at 4 degrees C or 25 degrees C and after freezing. Samples of imipenem-cilastatin sodium were constituted with 100 mL of each of 17 i.v. fluids to concentrations of 2.5 mg/mL or 5.0 mg/mL of each drug component and stored in glass infusion bottles at constant room temperature (25 degrees C) or constant refrigerated temperature (4 degrees C). The concentration of each solution was determined immediately after constitution by a stability-indicating high-performance liquid chromatographic assay; the concentrations of both drugs were monitored in each i.v. fluid until the time that the concentration of either imipenem or cilastatin decreased to less than 90% of the initial concentration (t90). The exact value of t90 was determined for each solution by linear regression. The solutions were also assessed for changes in pH or color. Cilastatin sodium was more stable in all 17 i.v. fluids than imipenem. The stability of imipenem was dependent on the concentration of that drug in solution; solutions of imipenem 2.5 mg/mL were more stable than solutions of imipenem 5.0 mg/mL. The values of t90 for imipenem in solutions stored at 4 degrees C were greater than the values for solutions stored at 25 degrees C. Imipenem was most stable in 0.9% sodium chloride injection. The pH values of the solutions generally decreased during the study period.(ABSTRACT TRUNCATED AT 250 WORDS)     

Stability of amphotericin B in four concentrations of dextrose injection.

The stability of amphotericin B in 5%, 10%, 15%, and 20% dextrose injection was investigated. The dextrose solutions were prepared in triplicate from sterile water for injection and 70% dextrose injection and placed in empty 50-mL polyvinyl chloride bags. The pH of each solution was determined before amphotericin B was added to a concentration of approximately 100 micrograms/mL. The bags were stored at 15-25 degrees C and protected from light. Three 1-mL samples were taken from each bag at various times up to 24 hours. One sample was analyzed for precipitation and color and pH changes. Two samples were analyzed in duplicate by stability-indicating high-performance liquid chromatography. No visual changes were observed, and pH did not change substantially. The mean amphotericin B concentration was greater than 90% of the initial concentration at each sampling time. However, the drug concentration in 3 of the 27 samples from the admixtures with 10% dextrose injection and 5 of the 27 samples from the admixtures with 20% dextrose injection fell below 90% of the initial concentration. Amphotericin B 100 micrograms/mL was stable in 5%, 10%, 15%, and 20% dextrose injection when stored for up to 24 hours at 15-25 degrees C and protected from light.     

Stability of phenylephrine hydrochloride injection in polypropylene syringes.

PURPOSE: The stability of extemporaneously prepared phenylephrine hydrochloride injection stored in polypropylene syringes was studied. METHODS: Dilution of phenylephrine hydrochloride to a nominal concentration of 100 mug/mL was performed under aseptic conditions by adding 100 mg of phenylephrine hydrochloride (total of 10 mL from two 5-mL 10-mg/mL vials) to 1000 mL of 0.9% sodium chloride injection. The resulting solution was drawn into 10-mL polypropylene syringes and sealed with syringe caps. The syringes were then frozen (-20 degrees C), refrigerated (3-5 degrees C), or kept at room temperature (23-25 degrees C). Four samples of each preparation were analyzed on days 0, 7, 15, 21, and 30. Physical stability was assessed by visual examination. The pH of each syringe was also measured at each time point. Sterility of the samples was not assessed. Chemical stability of phenylephrine hydrochloride was evaluated using high-performance liquid chromatography. To demonstrate the stability-indicating nature of the assay, forced degradation of phenylephrine was conducted. Samples were considered stable if there was less than 10% degradation of the initial concentration. RESULTS: Phenylephrine hydrochloride diluted to 100 microg/mL with 0.9% sodium chloride injection was physically stable throughout the study. No precipitation was observed. Minimal to no degradation was observed over the 30-day study period. CONCLUSION: Phenylephrine hydrochloride diluted to a concentration of 100 mug/mL in 0.9% sodium chloride injection was stable for at least 30 days when stored in polypropylene syringes at -20 degrees C, 3-5 degrees C, and 23-25 degrees C.     

Stability of ondansetron hydrochloride in portable infusion-pump reservoirs.

The stability of ondansetron hydrochloride 0.24 and 2 mg/mL when delivered by portable infusion pump at near-body temperature over various time periods was investigated. Nine 100-mL drug reservoirs were prepared, three containing ondansetron hydrochloride 2 mg/mL and six containing ondansetron hydrochloride diluted with 0.9% sodium chloride injection to 0.24 mg/mL. Three of the reservoirs containing the diluted solution were refrigerated for up to 30 days at 3 degrees C before being attached to portable infusion pumps and pumped over 24 hours at 30 degrees C. The remaining six reservoirs were attached to pumps immediately after being filled, and the solutions were delivered for up to 24 hours (the diluted solution; three reservoirs) or up to seven days (the concentrated solution; three reservoirs) at 30 degrees C. Samples were taken initially and periodically and analyzed by high-performance liquid chromatography and with a pH meter. Both the diluted and the concentrated solutions of ondansetron hydrochloride retained at least 95% of the initial drug concentration under all the conditions studied. There was no appreciable change in pH. Ondansetron hydrochloride 0.24 mg/mL was stable when stored for up to 30 days at 3 degrees C and infused over 24 hours at 30 degrees C. Ondansetron hydrochloride 2 mg/mL was stable when infused for up to one week at 30 degrees C.     

Stability of amiodarone hydrochloride in admixtures with other injectable drugs

The stability of amiodarone hydrochloride in intravenous admixtures was studied. Amiodarone hydrochloride 900 mg was mixed with 500 mL of either 5% dextrose injection or 0.9% sodium chloride injection in polyvinyl chloride or polyolefin containers; identical solutions were also mixed with either potassium chloride 20 meq, lidocaine hydrochloride 2000 mg, quinidine gluconate 500 mg, procainamide hydrochloride 2000 mg, verapamil hydrochloride 25 mg, or furosemide 100 mg. All admixtures were prepared in triplicate and stored for 24 hours at 24 degrees C. Amiodarone concentrations were determined using a stability-indicating high-performance liquid chromatographic assay immediately after admixture and at intervals during storage. Each solution was visually inspected and tested for pH. Amiodarone concentrations decreased less than 10% in all admixtures except those containing quinidine gluconate in polyvinyl chloride containers. The only visual incompatibility observed was in admixtures containing quinidine gluconate and 5% dextrose injection. In most solutions pH either decreased slightly or remained unchanged. Amiodarone hydrochloride is stable when mixed with either 5% dextrose injection or 0.9% sodium chloride injection in polyvinyl chloride or polyolefin containers alone or with potassium chloride, lidocaine, procainamide, verapamil, or furosemide and stored for 24 hours at 24 degrees C. Amiodarone should not be mixed with quinidine gluconate in polyvinyl chloride containers.     

Stability of atropine sulfate prepared for mass chemical terrorism

BACKGROUND: Preparedness for chemical terrorism includes the procurement of the appropriate pharmacological antagonists. A large emphasis has been placed on having a sufficient quantity of atropine available to treat patients exposed to acetylcholinesterase inhibitors such as sarin. Severe exposures may necessitate the administration of large amounts of atropine and dictate the need to prepare significant quantities of extemporaneously compounded atropine solution to respond to mass numbers of casualties over the first 24-48 hours postexposure. OBJECTIVE: The objective of this project was to determine the stability of a 1 mg/mL atropine solution prepared in multidose IV solutions of 0.9% sodium chloride over a 72-hr period stored at varying temperatures. METHODS: Atropine sulfate solution 1 mg/mL in 0.9% sodium chloride was prepared from sterile pharmaceutical-grade atropine sulfate powder. Multidose bags of atropine sulfate (100 mL) were stored at controlled temperatures of 4 degrees C to 8 degrees C, 20 degrees C to 25 degrees C, and 32 degrees C to 36 degrees C for 3 days and covered with an amber occlusive cover to minimize exposure to light. Six samples from each bag were drawn at 6, 12, 24, 48, and 72 h after preparation and compared with a time zero control sample. The samples were assayed using United States Pharmacopeia/National Formulary (USP/NF) high-performance liquid chromatography (HPLC) methods for atropine sulfate injection. The USP standard of 95% for atropine sulfate stability was used as the primary endpoint. RESULTS: Atropine sulfate 1 mg/mL in 0.9% sodium chloride was stable for at least 72hr at 4 degrees C to 8 degrees C (percent initial concentration ranging from 96.5% to 103.4%), 20 degrees C to 25 degrees C (percent initial concentration ranging from 98.7% to 100.2%), and 32 degrees C to 36 degrees C (percent initial concentration ranging from 98.3% to 102.8%). Because the IV bags were protected from light during this study, we recommend this practice after preparing the atropine solution. CONCLUSIONS: The amount of atropine necessary to treat hundreds to thousands of victims of a chemical attack is immense. The extemporaneous preparation of atropine solution from pharmaceutical-grade powder eliminates concerns about the storage of excessive quantities of atropine. A 1 mg/mL solution is stable for at least 3 days, allowing for use during the most critical treatment periods after exposure.     

Stability of an ofloxacin injection in various infusion fluids.

The stability of ofloxacin was evaluated in 10 different infusion fluids under various storage conditions. Solutions of ofloxacin (0.4 mg/mL and 4.0 mg/mL) were prepared in (1) 0.9% sodium chloride injection; (2) 5% dextrose injection; (3) 5% dextrose and 0.9% sodium chloride injection; (4) 5% dextrose and lactated Ringer's injection; (5) 5% sodium bicarbonate injection; (6) Plasma-Lyte 56 and 5% dextrose injection; (7) 5% dextrose, 0.45% sodium chloride, and 0.15% potassium chloride injection; (8) 1/6 M sodium lactate injection; (9) water for injection; and (10) 20% mannitol injection. Each solution was injected into polyvinyl chloride bags and stored at (1) 24 degrees C for 3 days, (2) 5 degrees C for 7 days, (3) 5 degrees C for 14 days, (4) -20 degrees C for 13 weeks and then 5 degrees C for 14 days, or (5) -20 degrees C for 26 weeks and then 5 degrees C, for 14 days. Samples were assayed initially and after storage by high-performance liquid chromatography and examined for visual clarity, pH, turbidity, and particulates. Ofloxacin was stable in all solutions and under all storage conditions. All of the solutions were clear, pH was stable, and particulate-matter counts were acceptable under all storage conditions (except for the 20% mannitol solution, which formed crystals at 5 degrees C and -20 degrees C). An injectable formulation of ofloxacin was stable for at least 3 days at 24 degrees C, 14 days at 5 degrees C, and 26 weeks at -20 degrees C in all tested infusion fluids. Crystals formed in refrigerated or frozen solutions prepared with 20% mannitol injection.