In vitro culture characteristics of corneal epithelial, endothelial, and keratocyte cells in a native collagen matrix

The objective of this investigation was to demonstrate the effectiveness of a tissue-engineered collagen sponge as a substrate for the culture of human corneal cells. To that end, human kerotocyte, epithelial, and endothelial cells were cultured separately on collagen sponges composed of native fibrillar collagen with a pore size of approximately 0.1 mm. Co-culture experiments were also performed (epithelial/endothelial and epithelial/keratocyte cultures). Proliferation of keratocytes and matrix production was assessed. The morphology of the epithelial and endothelial cell cultures was characterized by histology and scanning electron microscopy. Keratocytes cultured on collagen sponges exhibited increased matrix synthesis over time as well as proliferation and repopulation of the matrix. Epithelial and endothelial cells showed the ability to migrate over the collagen sponge. The thickness of the epithelial layer was influenced by soluble factors produced by endothelial cells. The morphology of the bottom layer of epithelial cells was influenced by the presence of keratocytes in the culture. These studies indicate that human corneal cells exhibit normal cell phenotype when cultured individually on an engineered collagen sponge matrix and co-culture of different cell types in the cornea can influence cell behavior.     

Human keratocyte migration into collagen gels declines with in vitro ageing

Although senescence in various cell types has been shown to have detrimental effects on wound repair, the effect of this phenomenon on corneal function with increasing age has yet to be elucidated. This study investigated the effect of in vitro ageing on keratocyte migration into a collagen gel matrix. The keratocyte cell strain EK1. BR was cultured to late passage and a comparison of early passage migration with that of late passage migration was carried out. Early or late passage keratocytes were seeded onto 6 collagen gels (1.75 mg ml(-1)) for each experiment. Gels were incubated at 37 degrees C for 72 h, stained with calcein AM (0.5 mg ml(-1)) and assayed for cell migration using fluorescent microscopy. Changes in the effect of EGF on keratocyte migration with age were assessed by the addition of EGF (20 ng ml(-1)) to 3 of the 6 gels in each experiment. Proliferative lifespan was measured by immunocytochemical detection of Ki67 activity. This study shows for the first time that keratocyte migration, and migration in response to EGF stimulation, significantly declines with increasing age of keratocytes in culture (P<0.001). As keratocyte migration in response to cytokine stimulation is vital for corneal repair, the accumulation of senescent keratocytes with age may impair corneal wound healing.     

Collagen fibril diameter and alignment promote the quiescent keratocyte phenotype

In this study, we investigated how matrix nanotopography affects corneal fibroblast phenotype and matrix synthesis. To this end, corneal fibroblasts isolated from bovine corneas were grown on collagen nanofiber scaffolds of different diameters and alignment--30 nm aligned fibrils (30A), 300 nm or larger aligned fibrils (300A), and 30 nm nonaligned fibrils (30NA) in comparison with collagen coated flat glass substrates (FC). Cell morphology was visualized using confocal microscopy. Quantitative PCR was used to measure expression levels of six target genes: the corneal crystallin-transketolase (TKT), the myofibroblast marker-α-smooth muscle actin (SMA), and four matrix proteins-collagen 1 (COL1), collagen 3 (COL3), fibronectin (FN), and biglycan. It was found that SMA expression was down-regulated and TKT expression was increased on all three collagen nanofiber substrates, compared with the FC control substrates. However, COL3 and biglycan expression was also significantly increased on 300A, compared with the FC substrates. Thus matrix nanotopography down-regulates the fibrotic phenotype, promotes formation of the quiescent keratocyte phenotype, and influences matrix synthesis. These results have significant implications for the engineering of corneal replacements and for promoting regenerative healing of the cornea after disease and/or injury.     

Influence of keratocytes and retinal pigment epithelial cells on the mechanical properties of polyester-based tissue engineering micropatterned films

In this paper the mechanical properties of micropatterned polyester films prepared to serve as tissue engineering scaffolds of cornea were examined. Films were prepared by solvent casting of blends of poly(l-lactide-co-d,l-lactide) and poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid), on a micropatterned silicon template. They were seeded with keratocytes or retinal pigment epithelial cells and subjected to tensile testing to assess the contribution of cells and the deposited extra-cellular matrix (ECM) to the mechanical properties of the scaffold. In all the tests, the films used were wet and the cells were not fixed. Cell-free scaffolds showed a gradual deterioration in strength upon incubation in the cell culture medium at 37 degrees C; the deterioration rate was highest in the first week and decreased significantly over the second and third weeks. The ultimate strength of the cell-free scaffolds decreased from 0.99 to 0.42N/mm after 21 days of incubation. Cell seeded scaffolds showed a more complicated mechanical strength profile. Their response was found to depend both on the extent of surface coverage and on the cell type. The results were examined after dividing the data into two groups of lower and higher stiffness. For keratocyte seeded scaffolds, the strength of the high stiffness groups continued to increase as the incubation period increased while the lower stiffness groups did not show a distinct change. For the keratocyte seeded scaffolds, tensile strength increased from 0.65N/mm on Day 7 to 0.73N/mm on Day 21. On the other hand, the scaffolds seeded with retinal pigment epithelial cells showed a gradual deterioration over time in both the higher and lower stiffness groups. For epithelial cell seeded scaffolds this was 0.98N/mm on Day 7 and decreased to 0.77N/mm on Day 21 still an improvement over the unseeded scaffolds. This most probably was a result of a lower rate of ECM secretion in comparison to keratocytes and the newly secreted ECM could not compensate for the influence of scaffold degradation on the mechanical properties. It could, therefore, be concluded that cell seeding plays a positive role in strengthening a tissue engineered construct, and cell type has a significant influence on the extent of this improvement.     

Corneal stromal bioequivalents secreted on patterned silk substrates

Emulating corneal stromal tissue is believed to be the most challenging step in bioengineering an artificial human cornea because of the difficulty in reproducing its highly ordered microstructure, the key to the robust biomechanical properties and optical transparency of this tissue. We conducted a comparative study to assess the feasibility of human corneal stromal stem cells (hCSSCs) and human corneal fibroblasts (hCFs) in the generation of human corneal stromal tissue on groove-patterned silk substrates. In serum-free keratocyte differentiation medium, hCSSCs successfully differentiated into keratocytes secreting multilayered lamellae with orthogonally-oriented collagen fibrils, in a pattern mimicking human corneal stromal tissue. The constructs were 90–100 μm thick, containing abundant cornea-specific extracellular matrix (ECM) components, including keratan sulfate, lumican, and keratocan. In contrast, hCFs tended to differentiate into myofibroblasts that deposited less organized collagen in a pattern resembling that of corneal scar tissue. RGD surface coupling coupling was an essential factor in enhancing cell attachment, orientation, proliferation, differentiation and ECM deposition on the silk substratum. These results demonstrated that an approach of combining hCSSCs with an RGD surface-coupled patterned silk film offers a powerful tool to develop highly ordered collagen fibril-based constructs for corneal regeneration and corneal stromal tissue repair.     

Real time responses of fibroblasts to plastically compressed fibrillar collagen hydrogels

In vitro reconstituted type I collagen hydrogels are widely utilized for tissue engineering studies. However, highly hydrated collagen (HHC) gels exhibit insufficient mechanical strength and unstable geometrical properties, thereby limiting their therapeutic application. Plastic compression (PC) is a simple and reproducible approach for the immediate production of dense fibrillar collagen (DC) scaffolds which demonstrate multiple improvements for tissue engineered constructs including extracellular matrix (ECM)-like meso scale characteristics, increased mechanical properties (modulus and strength), enhanced cell growth and differentiation, and reduced long-term scaffold deformation. In order to determine at which stage these benefits become apparent, and the underlying mechanisms involved, the immediate response of NIH/3T3 fibroblasts to PC as well as longer-term cell growth within DC scaffolds were examined herein. The real time three-dimensional (3D) distribution of fluorescently labelled cells during PC was sequentially monitored using confocal laser scanning microscopy (CLSM), observing excellent cell retention and negligible numbers of expelled cells. Relative to cells grown in HHC gels, a significant improvement in cell survival within DC scaffolds was evident as early as day 1. Cell growth and metabolic activity within DC gels were significantly increased over the course of one week. While cells within DC scaffolds reached confluency, an inhomogeneous distribution of cells was present in HHC gels, as detected using x-ray computed micro-tomography analysis of phosphotungstic acid labelled cells and CLSM, which both showed a significant cell loss within the HHC core. Therefore, PC generates a DC gel scaffold without detrimental effects towards seeded cells, surpassing HHC gels as a 3D scaffold for tissue engineering.     

Chondrogenesis in perfusion bioreactors using porous silk scaffolds and hESC-derived MSCs

Tissue engineered cartilage can be grown in vitro with the use of cell-scaffold constructs and bioreactors. The present study was designed to investigate the effects of perfusion bioreactors on the chondrogenic potential of engineered constructs prepared from porous silk fibroin scaffolds seeded with human embryonic stem cell (hESC)-derived mesencyhmal stem cells (MSCs). After four weeks of incubation, constructs cultured in perfusion bioreactors showed significantly higher amounts of glycosaminoglycans (GAGs) (p < 0.001), DNA (p < 0.001), total collagen (p < 0.01), and collagen II (p < 0.01) in comparison to static culture. Mechanical stiffness of constructs increased 3.7-fold under dynamic culture conditions and RT-PCR results concluded that cells cultured in perfusion bioreactors highly expressed (p < 0.001) cartilage-related genes when compared with static culture. Distinct differences were noted in tissue morphology, including polygonal extracellular matrix structure of engineered constructs in thin superficial zones and an inner zone under static and dynamic conditions, respectively. The results suggest that the utility of perfusion bioreactors to modulate the growth of tissue-engineered cartilage and enhance tissue growth in vitro.     

Effect of human corneal keratocytes and retinal pigment epithelial cells on the mechanical properties of micropatterned collagen films

Collagen-based micropatterned films were seeded with human corneal keratocyte and epithelial cells to study their mechanical properties as tissue engineering substrates. The patterns were in the form of parallel channels with slanted walls. Influence of cell presence, type and growth on the mechanical properties of the films was investigated. Unseeded films showed gradual strength reduction from an initial value of 0.046 N/mm, possibly due to degradation, down to 0.032+/-0.012 N/mm in 2 weeks. Keratocyte growth was found to significantly improve the mechanical behavior of the films upon 1 week of incubation (0.067+/-0.017 N/mm) and the improvement continued gradually over the next 2 weeks. Films seeded with D407 retinal pigment epithelial cells, on the other hand, experienced a decrease (0.023+/-0.011 N/mm), followed by a slight increase in mechanical properties in the 21-day period. A steady increase in the number of keratocytes along the channels, cytoskeleton alignment and extracellular matrix (ECM) secretion restricted to the channels was observed. Increase in strength observed with keratocytes and, to a lesser extent, with the epithelial cells can be attributed to directional ECM synthesis and the orientation of the cells and their cytoskeleton which contribute to the strength in the direction of the channels. This study showed that cell, especially keratocyte, presence compensates for the degradation of collagen films and improve the overall mechanical properties of the engineered tissue.     

Multipotent stem cells in human corneal stroma

Keratocytes of the corneal stroma secrete a specialized extracellular matrix essential for vision. These quiescent cells exhibit limited capacity for self-renewal and after cell division become fibroblastic, secreting nontransparent tissue. This study sought to identify progenitor cells for human keratocytes. Near the corneal limbus, stromal cells expressed ABCG2, a protein present in many adult stem cells. The ABCG2-expressing cell population was isolated as a side population (SP) by cell sorting after exposure to Hoechst 33342 dye. The SP cells exhibited clonal growth and continued to express ABCG2 and also PAX6, product of a homeobox gene not expressed in adult keratocytes. Cloned SP cells cultured in medium with fibroblast growth factor-2 lost ABCG2 and PAX6 expression and upregulated several molecular markers of keratocytes, including keratocan, aldehyde dehydrogenase 3A1, and keratan sulfate. Cloned corneal SP cells under chondrogenic conditions produced matrix staining with toluidine blue and expressed cartilage-specific markers: collagen II, cartilage oligomatrix protein, and aggrecan. Exposure of cloned SP cells to neurogenic culture medium upregulated mRNA and protein for glial fibrillary acidic protein, neurofilament protein, and beta-tubulin II. These results demonstrate the presence of a population of cells in the human corneal stroma expressing stem cell markers and exhibiting multipotent differentiation potential. These appear to be the first human cells identified with keratocyte progenitor potential. Further analysis of these cells will aid elucidation of molecular mechanisms of corneal development, differentiation, and wound healing. These cells may be a resource for bioengineering of corneal stroma and for cell-based therapeutics.     

Differential effects of growth factors on tissue-engineered cartilage

The effects of four regulatory factors on tissue-engineered cartilage were examined with specific focus on the ability to increase construct growth rate and concentrations of glycosaminoglycans (GAG) and collagen, the major extracellular matrix (ECM) components. Bovine calf articular chondrocytes were seeded onto biodegradable polyglycolic acid (PGA) scaffolds and cultured in medium with or without supplemental insulin-like growth factor (IGF-I), interleukin-4 (IL-4), transforming growth factor-beta1 (TGF-beta1) or platelet-derived growth factor (PDGF). IGF-I, IL-4, and TGF-beta1 increased construct wet weights by 1.5-2.9-fold over 4 weeks of culture and increased amounts of cartilaginous ECM components. IGF-I (10-300 ng/mL) maintained wet weight fractions of GAG in constructs seeded at high cell density and increased by up to fivefold GAG fractions in constructs seeded at lower cell density. TGF-beta1 (30 ng/mL) increased wet weight fractions of total collagen by up to 1.4-fold while maintaining a high fraction of type II collagen (79 plus minus 11% of the total collagen). IL-4 (1-100 ng/mL) minimized the thickness of the GAG-depleted region at the construct surfaces. PDGF (1-100 ng/mL) decreased construct growth rate and ECM fractions. Different regulatory factors thus elicit significantly different chondrogenic responses and can be used to selectively control the growth rate and improve the composition of engineered cartilage.     

Wavy-walled bioreactor supports increased cell proliferation and matrix deposition in engineered cartilage constructs

Hydrodynamic forces in bioreactors can decisively influence extracellular matrix deposition in engineered cartilage constructs. In the present study, the reduced fluid shear, high-axial mixing environment provided by a wavy-walled bioreactor was exploited in the cultivation of cartilage constructs using polyglycolic acid scaffolds seeded with bovine articular chondrocytes. Increased growth as defined by weight, cell proliferation and extracellular matrix deposition was observed in cartilage constructs from wavy-walled bioreactors in comparison with those from spinner flasks cultured under the same conditions. The wet weight composition of 4-week constructs from the wavy-walled bioreactor was similar to that of spinner flask constructs, but the former were 60% heavier due to equally higher incorporation of extracellular matrix and 30% higher cell population. It is most likely that increased construct matrix incorporation was a result of increased mitotic activity of chondrocytes cultured in the environment of the wavy-walled bioreactor. A layer of elongated cells embedded in type I collagen formed at the periphery of wavy-walled bioreactor and spinner flask constructs, possibly as a response to local shear forces. On the basis of the robustness and reproducibility of the extracellular matrix composition of cartilage constructs, the wavy-walled bioreactor demonstrated promise as an experimental cartilage tissue-engineering vessel. Increased construct growth in the wavy-walled bioreactor may lead to enhanced mechanical properties and expedited in vitro cultivation.     

Perichondrium directed cartilage formation in silk fibroin and chitosan blend scaffolds for tracheal transplantation

The purpose of this study was to investigate the potential of silk fibroin and chitosan blend (SFCS) biological scaffolds for the purpose of cartilage tissue engineering with applications in tracheal tissue reconstruction. The capability of these scaffolds as cell carrier systems for chondrocytes was determined in vitro and cartilage generation in vivo on engineered chondrocyte-scaffold constructs with and without a perichondrium wrapping was tested in an in vivo nude mouse model. SFCS scaffolds supported chondrocyte adhesion, proliferation, and differentiation, determined as features of the cells based on the spherical cell morphology, increased accumulation of glycosaminoglycans, and increased collagen type II deposition with time within the scaffold framework. Perichondrium wrapping significantly (P<0.001) improved chondrogenesis within the cell-scaffold constructs in vivo. In vivo implantation for 6weeks did not generate cartilage structures resembling native trachea, although cartilage-like structures were present. The mechanical properties of the regenerated tissue increased due to the deposition of chondrogenic matrix within the SFCS scaffold structural framework of the trachea. The support of chondrogenesis by the SFCS tubular scaffold construct resulted in a mechanically sound structure and thus is a step towards an engineered trachea that could potentially support the growth of an epithelial lining resulting in a tracheal transplant with properties resembling those of the fully functional native trachea.     

Adhesion, phenotypic expression, and biosynthetic capacity of corneal keratocytes on surfaces coated with hyaluronic acid of different molecular weights

In ophthalmology, hyaluronic acid (HA) is an important extracellular matrix (ECM) component and is appropriate for use in generating a microenvironment for cell cultivation. The aim of this work was to evaluate the rabbit corneal keratocyte (RCK) growth in response to HA coatings under serum-free conditions. After modification with HA of varying molecular weights (MWs: 35-1500kDa), the surfaces were characterized by atomic force microscopy and contact angle measurements, and were used for cell culture studies. Our data indicated that the substrates coated with higher negatively charged HA become rougher and are more hydrophilic, resulting in the decrease of cell adhesion and cell-matrix interaction. This early cellular event was likely responsible for the determination of keratocyte configuration. Additionally, for the growth of RCKs on dry HA coatings with surface roughness of 1.1-1.7 nm, a strong cell-cell interaction was observed, which may facilitate the formation of multicellular spheroid aggregates and maintenance of mitotically quiescent state. At each culture time point from 1 to 5 days, a better biosynthetic capacity associated with a higher prevalence of elevated ECM production was found for the cells in a spherical configuration. Irrespective of polysaccharide MW of surface coatings, the RCKs presented good viability without hypoxia-induced death. As compared with a monolayer of adherent keratocytes on tissue culture polystyrene plates and low MW HA-modified samples, the cell spheroids (76-110 μm in diameter) showed significantly higher expressions of keratocan and lumican and lower expressions of biglycan, similar to those of keratocytes in vivo. Moreover, the expression levels of corneal crystallin aldehyde dehydrogenase (7-9-fold increase) and nestin (10-16-fold increase) were greater in larger-sized spheroids, indicating higher ability to maintain cellular transparency and self-renewal potential. It is concluded that the cultured RCKs on surfaces coated with HA of different MWs can sense ECM cues, and the multicellular spheroids may potentially be used for corneal stromal tissue engineering applications.     

Bioactive hydrogel-filament scaffolds for nerve repair and regeneration

The design of novel biomaterials is crucial for the advancement of tissue engineering in nerve regeneration. In this study we developed and evaluated novel biosynthetic scaffolds comprising collagen crosslinked with a terpolymer of poly(N-isopropylacrylamide) (PNiPAAm) as conduits for nerve growth. These collagen-terpolymer (collagen-TERP) scaffolds grafted with the laminin pentapeptide YIGSR were previously used as corneal substitutes in pigs and demonstrated enhanced nerve regeneration compared to allografts. The purpose of this project was to enhance neuronal growth on the collagen-TERP scaffolds through the incorporation of supporting fibers. Neuronal growth on these matrices was assessed in vitro using isolated dorsal root ganglia as a nerve source. Statistical significance was assessed using a one-way ANOVA. The incorporation of fibers into the collagen-TERP scaffolds produced a significant increase in neurite extension (p<0.05). The growth habit of the nerves varied with the type of fiber and included directional growth of the neurites along the surface of certain fiber types. Furthermore, the presence of fibers in the collagen-TERP scaffolds appeared to influence neurite morphology and function; neurites grown on fibers-incorporated collagen-TERP scaffolds expressed higher levels of Na channels compared to the scaffolds without fiber. Overall, our results suggest that incorporation of supporting fibers enhanced neurite outgrowth and that surface properties of the scaffold play an important role in promoting and guiding nerve regeneration. More importantly, this study demonstrates the potential value of tissue engineered collagen-TERP hybrid scaffolds as conduits in peripheral nerve repair.     

Localization of type VI collagen in tissue-engineered cartilage on polymer scaffolds

Together, the chondrocyte and its pericellular matrix have been collectively termed the chondron. Current opinion is that the pericellular matrix has both protective and signalling functions between chondrocyte and extracellular matrix. Formation of a native chondrocyte pericellular matrix or chondron structure might therefore be advantageous when tissue engineering a functional hyaline cartilage construct. The presence of chondrons has not been previously described in cartilage engineered on a scaffold. In this paper, we describe a modified immunochemical method to detect collagen VI, a key molecular marker for the pericellular matrix, and an investigation of type VI collagen distribution in engineered hyaline cartilage constructs. Cartilage constructs were engineered from adult human or bovine hyaline chondrocytes cultured on sponge or nonwoven fiber based HYAFF 11 scaffolds. Type VI collagen was detected in all constructs, but a distinctive, high-density, chondron-like distribution of collagen VI was present only in constructs exhibiting additional features of hyaline cartilage engineered using nonwoven HYAFF 11. Chondron structures were localized in areas of the extracellular matrix displaying strong collagen II and GAG staining of constructs where type II collagen composed a high percentage (over 65%) of the total collagen.     

Development of tailor-made collagen-glycosaminoglycan matrices: EDC/NHS crosslinking, and ultrastructural aspects

The many biocharacteristics of glycosaminoglycans (GAGs) make them valuable molecules to be incorporated in collagenous biomaterials. To prepare tailor-made collagen-GAG matrices with a well-defined biodegradability and (bioavailable) GAG content, the crosslinking conditions have to be controlled. Additionally, the ultrastructural location of GAGs in engineered substrates should resemble that of the application site. Using chondroitin sulfate (CS) as a model GAG, these aspects were evaluated. The methodology was then applied for other GAGs. CS was covalently attached to collagen using 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS). A maximum of about 155 mg CS/g matrix could be immobilized. CS incorporation and bioavailability, as evaluated by interaction with specific antibodies and glycosidases, was dependent on the molar ratio EDC:carboxylic groups of CS. The denaturation temperature could be modulated from 61 to 85 degrees C. The general applicability of EDC/NHS for immobilizing GAGs was demonstrated with dermatan sulfate, heparin, and heparan sulfate. These matrices revealed comparable physico-chemical characteristics, biodegradabilities, and preserved bioavailable GAG moieties. At the ultrastructural level, GAGs appeared as discrete, electron-dense filaments, each filament representing a single GAG molecule. Distribution was independent of GAG type. They were observed throughout the matrix fibers and at the outer sites, and located, either parallel or orthogonally, at the periphery of individual collagen fibrils. Compositional and ultrastructural similarity between matrices and tissue structures like cartilage and basement membranes can be realized after attachment of specific GAG types. It is concluded that EDC/NHS is generally applicable for attachment of GAGs to collagen. Modulation of crosslinking conditions provides matrices with well-defined GAG contents, and biodegradabilities. Ultrastructural similarities between artificially engineered scaffolds and their possible application site may favor the use of specific collagen-GAG matrices in tissue engineering.     

Novel Melt-Processable Chitosan–Polybutylene Succinate Fibre Scaffolds for Cartilage Tissue Engineering

Novel chitosan/polybutylene succinate fibre-based scaffolds (C-PBS) were seeded with bovine articular chondrocytes in order to assess their suitability for cartilage tissue engineering. Chondrocytes were seeded onto C-PBS scaffolds using spinner flasks under dynamic conditions, and cultured under orbital rotation for a total of 6 weeks. Non-woven polyglycolic acid (PGA) felts were used as reference materials. Tissue-engineered constructs were characterized by scanning electron microscopy (SEM), hematoxylin–eosin (H&E), toluidine blue and alcian blue staining, immunolocalization of collagen types I and II, and dimethylmethylene blue (DMB) assay for glycosaminoglycans (GAG) quantification at different time points. SEM showed the chondrocytes' typical morphology, with colonization at the surface and within the pores of the C-PBS scaffolds. These observations were supported by routine histology. Toluidine blue and alcian blue stains, as well as immunohistochemistry for collagen types I and II, provided qualitative information on the composition of the engineered extracellular matrix. More pronounced staining was observed for collagen type II than collagen type I. Similar results were observed with constructs engineered on PGA scaffolds. These also exhibited higher amounts of matrix glycosaminoglycans and presented a central region which contained fewer cells and little matrix, a feature that was not detected with C-PBS constructs.     

Effects of hedgehog proteins on tissue engineering of cartilage in vitro

The effects of three derivatives of the N-terminal signaling domain of hedgehog proteins on cartilage engineered in vitro were investigated, with specific focus on the ability to increase tissue growth rate and concentrations of major extracellular matrix components, that is, glycosaminoglycans (GAG) and collagen, and on the effects on morphological appearance of the tissue. Bovine articular chondrocytes were cultured on biodegradable polyglycolic acid (PGA) scaffolds with or without the addition of dipalmitoylated sonic hedgehog (dp-shh), dipalmitoylated indian hedgehog (dp-ihh), or sonic hedgehog dimer (shh-dimer) to medium with either 1% or 10% fetal bovine serum (FBS). All three hedgehog proteins dose-dependently increased construct weights (by up to 1.95-fold, dp-shh at 1,000 ng/mL) and the fraction of GAG over 4 weeks (by up to 2.7-fold, dp-shh at 1,000 ng/mL), as compared to control constructs. Dp-shh and dp-ihh elicited similar responses; a 10-fold higher concentration of nonacylated shh-dimer was necessary to reach comparable results. Positive hedgehog effects were more pronounced in medium containing 1% FBS than in medium containing 10% FBS; however, at either FBS concentration, cartilaginous tissues grown in the presence of hedgehog proteins appeared morphologically more mature. Hedgehog derivatives thus appear as promising candidates to improve the development and composition of engineered cartilage.