Synthesis,Crystal Structure and Luminescent Property of Mg(II) Complex with N-Benzenesulphonyl-L-Leucine and 1,10-Phenanthroline

A new complex [Mg(L)₂(phen)(H₂O)₂](phen)(H₂O)₂ [L= N-benzenesulphonyl-L-leucine] was synthesized by the reaction of magnesium chloride hexahydrate with N-benzenesulphonyl-L-leucine and 1,10-phenanthroline in the CH₃CH₂OH/H₂O (v:v = 5:1). It was characterized by elemental analysis, IR and X-ray single crystal diffraction analysis. The crystal of the title complex [Mg(L)₂(phen)(H₂O)₂](phen)(H₂O)₂ belongs to triclinic, space group P-1 with a = 0.72772(15) nm, b = 1.4279(3) nm, c = 1.4418(3) nm, α = 63.53(3)°, β = 79.75(3)°, γ = 81.83(3)°, V = 1.3163(5) nm³, Z =1, D_c= 1.258 μg·m⁻³, μ = 0.177 mm⁻¹, F(000) = 526, and final R₁ = 0.0506, ωR₂ = 0.1328. The complex comprises a six-coordinated magnesium(II) center, with a N₂O₄ distorted octahedron coordination environment. The molecules are connected by hydrogen bonds and π-π stacking to form one dimensional chain structure. The luminescent property of the Mg(II) complex has been investigated in solid.     

New Heterotrinuclear CuIILnIIICuII (Ln = Ho,Er) Compounds with the Schiff Base: Syntheses,Structural Characterization,Thermal and Magnetic Properties

New heterotrinuclear complexes with the general formula [Cu₂Ln(H₂L)(HL)(NO₃)₂]·MeOH (Ln = Ho (1), Er (2), H₄L = N,N′-bis(2,3-dihydroxybenzylidene)-1,3-diaminopropane) were synthesized using compartmental Schiff base ligand in conjugation with auxiliary ligands. The compounds were characterized by elemental analysis, ATR-FTIR spectroscopy, X-ray diffraction, TG, DSC, TG-FTIR and XRD analysis. The N₂O₄ salen-type ligand coordinates 3d and 4f metal centers via azomethine nitrogen and phenoxo oxygen atoms, respectively, to form heteropolynuclear complexes having CuO₂Ln cores. In the crystals 1 and 2, two terminal Cu(II) ions are penta-coordinated with a distorted square-pyramidal geometry and a Ln^III ion with trigonal dodecahedral geometry is coordinated by eight oxygen atoms from [Cu^II(H₂L)(NO₃)]⁻ and [Cu^II(HL)(NO₃)]²⁻ units. Compounds 1 and 2 are stable at room temperature. During heating, they decompose in a similar way. In the first decomposition step, they lose solvent molecules. The exothermic decomposition of ligands is connected with emission large amounts of gaseous products e.g., water, nitric oxides, carbon dioxide, carbon monoxide. The final solid products of decomposition 1 and 2 in air are mixtures of CuO and Ho₂O₃/Er₂O₃. The measurements of magnetic susceptibilities and field dependent magnetization indicate the ferromagnetic interaction between Cu^II and Ho^III ions 1.     

One-Pot Self-Assembly of Dinuclear,Tetranuclear, and H-Bonding-Directed Polynuclear Cobalt(II), Cobalt(III), and Mixed-Valence Co(II)/Co(III) Complexes of Schiff Base Ligands with Incomplete Double Cubane Core

The reaction of 2,6-diformyl-4-methylphenol (DFMF) with 1-amino-2-propanol (AP) and tris(hydroxymethyl)aminomethane (THMAM) was investigated in the presence of Cobalt(II) salts, (X = ClO₄⁻, CH₃CO₂⁻, Cl⁻, NO₃⁻), sodium azide (NaN₃), and triethylamine (TEA). In one pot, the variation in Cobalt(II) salt results in the self-assembly of dinuclear, tetranuclear, and H-bonding-directed polynuclear coordination complexes of Cobalt(III), Cobalt(II), and mixed-valence Co^IICo^III: [Co₂^III(H₂L⁻¹)₂(AP⁻¹)(N₃)](ClO₄)₂ (1), [Co₄(H₂L⁻¹)₂(µ₃-1,1,1-N₃)₂(µ-1,1-N₃)₂Cl₂(CH₃OH)₂]·4CH₃OH (2), [Co₂^IICo₂^III(HL⁻²)₂(µ-CH₃CO₂)₂(µ₃-OH)₂](NO₃)₂·2CH₃CH₂OH (3), and [Co₂^IICo₂^III (H₂L1²⁻)₂(THMAM⁻¹)₂](NO₃)₄ (4). In 1, two cobalt(III) ions are connected via three single atom bridges; two from deprotonated ethanolic oxygen atoms in the side arms of the ligands and one from the1-amino-2-propanol moiety forming a dinuclear unit with a very short (2.5430(11) Å) Co-Co intermetallic separation with a coordination number of 7, a rare feature for cobalt(III). In 2, two cobalt(II) ions in a dinuclear unit are bridged through phenoxide O and μ₃-1,1,1-N₃ azido bridges, and the two dinuclear units are interconnected by two μ-1,1-N₃ and two μ₃-1,1,1-N₃ azido bridges generating tetranuclear cationic [Co₄(H₂L⁻¹)₂(µ₃-1,1,1-N₃)₂(µ-1,1-N₃)₂Cl₂(CH₃OH)₂]²⁺ units with an incomplete double cubane core, which grow into polynuclear 1D-single chains along the a-axis through H-bonding. In 3, HL²⁻ holds mixed-valent Co(II)/Co(III) ions in a dinuclear unit bridged via phenoxide O, μ-1,3-CH₃CO₂⁻, and μ₃-OH⁻ bridges, and the dinuclear units are interconnected through two deprotonated ethanolic O in the side arms of the ligands and two μ₃-OH⁻ bridges generating cationic tetranuclear [Co₂^IICo₂^III(HL⁻²)₂(µ-CH₃CO₂)₂(µ_3-OH)₂]²⁺ units with an incomplete double cubane core. In 4, H₂L1⁻² holds mixed-valent Co(II)/Co(III) ions in dinuclear units which dimerize through two ethanolic O (μ-RO⁻) in the side arms of the ligands and two ethanolic O (μ₃-RO⁻) of THMAM bridges producing centrosymmetric cationic tetranuclear [Co₂^IICo₂^III (H₂L1⁻²)₂(THMAM⁻¹)₂]⁴⁺ units which grow into 2D-sheets along the bc-axis through a network of H-bonding. Bulk magnetization measurements on 2 demonstrate that the magnetic interactions are completely dominated by an overall ferromagnetic coupling occurring between Co(II) ions.     

Magnetic and Electrical Behaviors of the Homo- and Heterometallic 1D and 3D Coordination Polymers Based on the Partial Decomposition of the [Cr(C2O4)3]3− Building Block

One-dimensional (1D) oxalate-bridged homometallic {[Mn(bpy)(C₂O₄)]·1.5H₂O}_n (1) (bpy = 2,2’-bipyridine) and heterodimetallic {[CrCu₃(bpy)₃(CH₃OH)(H₂O)(C₂O₄)₄][Cu(bpy)Cr(C₂O₄)₃]·CH₂Cl₂·CH₃OH·H₂O}_n (2) coordination polymers, as well as the three-dimensional (3D) heterotrimetallic {[CaCr₂Cu₂(phen)₄(C₂O₄)₆]·4CH₃CN·2H₂O}_n (3) (1,10-phenanthroline) network, have been synthesized by a building block approach using a layering technique, and characterized by single-crystal X-ray diffraction, infrared (IR) and impedance spectroscopies and magnetization measurements. During the crystallization process partial decomposition of the tris(oxalato)chromate(III) happened and 1D polymers 1 and 2 were formed. The antiferromagnetic interactions between the manganese(II) ions were mediated by oxalate ligands in the chain [Mn(bpy)(C₂O₄)]_n of 1, with intra-chain super-exchange interaction 𝐽 = (−3.134 ± 0.004) K; magnetic interaction between neighbouring chains is negligible making this system closer than other known Mn-chains to the ideal 1D Heisenberg antiferromagnet. Compound 2 comprises a 1D coordination anion [Cu(bpy)Cr(C₂O₄)₃]_nⁿ⁻ (Cr2–Cu4) with alternating [Cr(C₂O₄)₃]³⁻ and [Cu(bpy)]²⁺ units mutually bridged through the oxalate group. Another chain (Cr1–Cu3) is similar, but involves a homodinuclear unit [Cu(bpy)(H₂O)(µ-C₂O₄)Cu(bpy)(CH₃OH)]²⁺ (Cu1–Cu2) coordinated as a pendant group to a terminal oxalate oxygen. Magnetic measurements showed that the Cu1−Cu2 cationic unit is a strongly coupled antiferromagnetic dimer, independent from the other magnetic ions within ferromagnetic chains Cr1–Cu3 and Cr2–Cu4. A 3D polymer {[CaCr₂Cu₂(phen)₄(C₂O₄)₆]·4CH₃CN·2H₂O}_n (3) comprising three different metal centers (Ca²⁺, Cr³⁺ and Cu²⁺) oxalate-bridged, contains Ca²⁺ atoms as nodes connected with four Cr³⁺ atoms through oxalate ligands. The network thus formed can be reduced to an underlying graph of diamondoid (dia) or (6⁶) topology. Magnetization of 3 shows the ferromagnetic oxalate-bridged dimers [Cu^IICr^III], whose mutual interaction could possibly originate through the spin polarization of Ca²⁺ orbitals. Compounds 1 and 3 exhibit lower electrical conductivity at room temperature (RT) in comparison to compound 2.     

The Photoluminescent Properties of New Cationic Iridium(III) Complexes Using Different Anions and Their Applications in White Light-Emitting Diodes

Three cationic iridium(III) complexes [Ir(ppy)₂(phen)][PF₆] (C1), [Ir(ppy)₂(phen)]₂SiF₆ (C2) and [Ir(ppy)₂(phen)]₂TiF₆ (C3) (ppy: 2-phenylpyridine, phen: 1, 10-phenanthroline) using different anions were synthesized and characterized by ¹H Nuclear magnetic resonance (¹HNMR), mass spectra (MS), Fourier transform infrared (FTIR) spectra and element analysis (EA). After the ultraviolet visible (UV-vis) absorption spectra, photoluminescent (PL) properties and thermal properties of the complexes were investigated, complex C1 and C3 with good optical properties and high thermal stability were used in white light-emitting diodes (WLEDs) as luminescence conversion materials by incorporation with 460 nm-emitting blue GaN chips. The integrative performances of the WLEDs fabricated with complex C1 and C3 are better than those fabricated with the widely used yellow phosphor Y₃Al₅O₁₂:Ce³⁺ (YAG). The color rendering indexes of the WLEDs with C1 and C3 are 82.0 and 82.6, the color temperatures of them are 5912 K and 3717 K, and the maximum power efficiencies of them are 10.61 Lm·W⁻¹ and 11.41 Lm·W⁻¹, respectively.     

Formation of Solid Solutions and Physicochemical Properties of the High-Entropy Ln1−xSrx(Co,Cr,Fe,Mn,Ni)O3−δ (Ln = La,Pr, Nd,Sm or Gd) Perovskites

Phase composition, crystal structure, and selected physicochemical properties of the high entropy Ln(Co,Cr,Fe,Mn,Ni)O_3−δ (Ln = La, Pr, Gd, Nd, Sm) perovskites, as well as the possibility of Sr doping in Ln_1−xSr_x(Co,Cr,Fe,Mn,Ni)O_3−δ series, are reported is this work. With the use of the Pechini method, all undoped compositions are successfully synthesized. The samples exhibit distorted, orthorhombic or rhombohedral crystal structure, and a linear correlation is observed between the ionic radius of Ln and the value of the quasi-cubic perovskite lattice constant. The oxides show moderate thermal expansion, with a lack of visible contribution from the chemical expansion effect. Temperature-dependent values of the total electrical conductivity are reported, and the observed behavior appears distinctive from that of non-high entropy transition metal-based perovskites, beyond the expectations based on the rule-of-mixtures. In terms of formation of solid solutions in Sr-doped Ln_1−xSr_x(Co,Cr,Fe,Mn,Ni)O_3−δ materials, the results indicate a strong influence of the Ln radius, and while for La-based series the Sr solubility limit is at the level of x_max = 0.3, for the smaller Pr it is equal to just 0.1. In the case of Nd-, Sm- and Gd-based materials, even for the x_Sr = 0.1, the formation of secondary phases is observed on the SEM + EDS images.     

Syntheses and a Solid State Structure of a Dinuclear Molybdenum(V) Complex with Pyridine

A mononuclear complex [MoOCl₄(H₂O)]⁻ readily forms a metal−metal bonded {Mo₂O₄}²⁺ core. A high content of pyridine in the reaction mixture prevents further aggregation of dinuclear cores into larger clusters and a neutral, dinuclear complex with the [Mo₂O₄Cl₂(Py)₄] composition is isolated as a product. Solid state structures of two compounds containing this complex, [Mo₂O₄Cl₂(Py)₄]·2.25Py (1) and [Mo₂O₄Cl₂(Py)₄]·1.5PyHCl (2), were investigated by X-ray crystallography.     

Platinum(II) Complexes with Bulky Disubstitute Triazolopyrimidines as Promising Materials for Anticancer Agents

Herein, we present dicarboxylate platinum(II) complexes of the general formula [Pt(mal)(DMSO)(L)] and [Pt(CBDC)(DMSO)(L)], where L is dbtp 5,7-ditertbutyl-1,2,4-triazolo[1,5-a]pyrimidine) or ibmtp (7-isobutyl-5-methyl-1,2,4- triazolo[1,5-a]pyrimidine), as prospective prodrugs. The platinum(II) complexes were synthesized in a one-pot reaction between cis-[PtCl₂(DMSO)₂], silver malonate or silver cyclobutane-1,1-dicarboxylate and triazolopyrimidines. All platinum(II) compounds were characterized by FT-IR, and ¹H, ¹³C, ¹⁵N and ¹⁹⁵Pt NMR; and their square planar geometries with one monodentate N(3)-bonded 5,7-disubstituted-1,2,4-triazolo[1,5-a]pyrimidine, one S-bonded molecule of dimethyl sulfoxide and one O,O-chelating malonato (1, 2) or O,O-chelating cyclobutane-1,1-dicarboxylato (3, 4) was determined. Additionally, [Pt(CBDC)(dbtp)(DMSO)] (3) exhibited (i) substantial in vitro cytotoxicity against the lung adenocarcinoma epithelial cell line (A549) (IC₅₀ = 5.00 µM) and the cisplatin-resistant human ductal breast epithelial tumor cell line (T47D) (IC₅₀ = 6.60 µM); and (ii) definitely exhibited low toxicity against normal murine embryonic fibroblast cells (BALB/3T3).     

Synthesis,Crystal Structure and Luminescent Property of Cd (II) Complex with N-Benzenesulphonyl-L-leucine

A new trinuclear Cd (II) complex [Cd₃(L)₆(2,2-bipyridine)₃] [L = N-phenylsulfonyl-L-leucinato] has been synthesized and characterized by elemental analysis, IR and X-ray single crystal diffraction analysis. The results show that the complex belongs to the orthorhombic, space group P2₁2₁2₁ with a = 16.877(3) Å, b = 22.875(5) Å, c = 29.495(6) Å, α = β = γ = 90°, V = 11387(4) ų, Z = 4, D_c= 1.416 μg·m⁻³, μ = 0.737 mm⁻¹, F (000) = 4992, and final R₁ = 0.0390, ωR₂ = 0.0989. The complex comprises two seven-coordinated Cd (II) atoms, with a N₂O₅ distorted pengonal bipyramidal coordination environment and a six-coordinated Cd (II) atom, with a N₂O₄ distorted octahedral coordination environment. The molecules form one dimensional chain structure by the interaction of bridged carboxylato groups, hydrogen bonds and π-π interaction of 2,2-bipyridine. The luminescent properties of the Cd (II) complex and N-Benzenesulphonyl-L-leucine in solid and in CH₃OH solution also have been investigated.     

A Novel Mineral-like Copper Phosphate Chloride with a Disordered Guest Structure: Crystal Chemistry and Magnetic Properties

Novel copper phosphate chloride has been obtained under middle-temperature hydrothermal conditions. Its crystal structure was established based on the low-temperature X-ray diffraction data: Na₂Li_0.75(Cs,K)_0.5[Cu₅(PO₄)₄Cl]·3.5(H₂O,OH), sp. gr. C2/m, a = 19.3951(8) Å, b = 9.7627(3) Å, c = 9.7383(4) Å, β = 99.329(4)°, T = 150 K, MoK_α (λ = 0.71073 Å), R = 0.049. The crystal structure includes tetrameric copper clusters as the main building blocks, which are built of four CuO₄Cl pyramids sharing apical Cl vertices. The clusters are combined through phosphate groups and additional copper-centered polyhedra to form two mostly ordered periodic layers. Between the layers and inside the framework channels, alkali ions, H₂O molecules, or OH groups are statistically distributed. Na₂Li_0.75(Cs,K)_0.5[Cu₅(PO₄)₄Cl]·3.5(H₂O,OH) is a synthetic modification of a sampleite-polymorph of the lavendulan mineral group and represents a new member in a mero-plesiotype series of copper phosphates and arsenates, for which the crystal structures contain two-periodic [Cu₄X(TO₄)₄]_∞ modules (T = As, P; X = Cl, O). Magnetically, this phase exhibits the phase transition at T_C = 6.5 K, below which it possesses a weak ferromagnetic moment.     

The Role of Prussian Blue-Thallium and Potassium Similarities and Differences in Crystal Structures of Selected Cyanido Complexes of W,Fe and Mo

The synthesis and single X-ray crystal structures of Tl₂[W(CN)₆(bpy)]·H₂O, Tl[W(CN)₆(bpy)], Tl₅₇[{Fe(CN)₆}₁₂{NO₃}₉]·9H₂O, Tl₄[W(CN)₈] and Tl₄[Mo(CN)₈] are described. Salts crystalize in the monoclinic or trigonal (Fe) space group. For all complexes, the very unusual “side-on” coordination of Tl to C and N of cyanido ligands is observed and compared to potassium cations. The very strong bonding to cyanido ligands with an 8–13 coordination number of thallium is described and discussed. The difference between potassium and thallium bonding is an indication of the biological activity of thallium and the role of Prussian blue in the thallium detoxification procedure.     

Surface structural-chemical characterization of a single-site d0 heterogeneous arene hydrogenation catalyst having 100% active sites

Structural characterization of the catalytically significant sites on solid catalyst surfaces is frequently tenuous because their fraction, among all sites, typically is quite low. Here we report the combined application of solid-state ¹³C-cross-polarization magic angle spinning nuclear magnetic resonance (¹³C-CPMAS-NMR) spectroscopy, density functional theory (DFT), and Zr X-ray absorption spectroscopy (XAS) to characterize the adsorption products and surface chemistry of the precatalysts (η⁵-C₅H₅)₂ZrR₂ (R = H, CH₃) and [η⁵-C₅(CH₃)₅]Zr(CH₃)₃ adsorbed on Brønsted superacidic sulfated alumina (AlS). The latter complex is exceptionally active for benzene hydrogenation, with ∼100% of the Zr sites catalytically significant as determined by kinetic poisoning experiments. The ¹³C-CPMAS-NMR, DFT, and XAS data indicate formation of organozirconium cations having a largely electrostatic [η⁵-C₅(CH₃)₅]Zr(CH₃)₂⁺···AlS⁻ interaction with greatly elongated Zr···O_AlS distances of ∼2.35(2) Å. The catalytic benzene hydrogenation cycle is stepwise understandable by DFT, and proceeds via turnover-limiting H₂ delivery to surface [η⁵-C₅(CH₃)₅]ZrH₂(benzene)⁺···AlS⁻ species, observable by solid-state NMR and XAS.     

Potassium Complexes of Quercetin-5′-Sulfonic Acid and Neutral O-Donor Ligands: Synthesis,Crystal Structure,Thermal Analysis,Spectroscopic Characterization and Physicochemical Properties

The coordination ability of QSA⁻ ligand towards potassium cations was investigated. Potassium complex of quercetin-5’-sulfonate of the general formula [KQSA(H₂O)₂]_n was obtained. The [KQSA(H₂O)₂] (1) was a starting compound for solvothermal syntheses of acetone (2) and dimethylsulfoxide (3) complexes. For the crystalline complexes 1–3, crystals morphology was analyzed, IR and Raman spectra were registered, as well as thermal analysis for 1 was performed. Moreover, for 1 and 3, molecular structures were established. The potassium cations are coordinated by eight oxygen atoms (KO₈) of a different chemical nature; coordinating groups are sulfonic, hydroxyl, and carbonyl of the QSA⁻ anion, and neutral molecules—water (1) or DMSO (3). The detailed thermal studies of 1 confirmed that water molecules were strongly bonded in the complex structure. Moreover, it was stated that decomposition processes depended on the atmosphere used above 260 °C. The TG–FTIR–MS technique allowed the identification of gaseous products evolving during oxidative decomposition and pyrolysis of the analyzed compound: water vapor, carbon dioxide, sulfur dioxide, carbonyl sulfide, and carbon monoxide. The solubility studies showed that 1 is less soluble in ethanol than quercetin dihydrate in ethanol, acetone, and DMSO. The exception was aqueous solution, in which the complex exhibited significantly enhanced solubility compared to quercetin. Moreover, the great solubility of 1 in DMSO explained the ease of ligand exchange (water for DMSO) in [KQSA(H₂O)₂].     

Crystal Structure,Spectroscopic Characterization,Antioxidant and Cytotoxic Activity of New Mg(II) and Mn(II)/Na(I) Complexes of Isoferulic Acid

The Mg(II) and heterometallic Mn(II)/Na(I) complexes of isoferulic acid (3-hydroxy-4-methoxycinnamic acid, IFA) were synthesized and characterized by infrared spectroscopy FT-IR, FT-Raman, electronic absorption spectroscopy UV/VIS, and single-crystal X-ray diffraction. The reaction of MgCl₂ with isoferulic acid in the aqueous solutions of NaOH resulted in synthesis of the complex salt of the general formula of [Mg(H₂O)₆]⋅(C₁₀H₉O₄)₂⋅6H₂O. The crystal structure of this compound consists of discrete octahedral [Mg(H₂O)₆]²⁺ cations, isoferulic acid anions and solvent water molecules. The hydrated metal cations are arranged among the organic layers. The multiple hydrogen-bonding interactions established between the coordinated and lattice water molecules and the functional groups of the ligand stabilize the 3D architecture of the crystal. The use of MnCl₂ instead of MgCl₂ led to the formation of the Mn(II)/Na(I) complex of the general formula [Mn₃Na₂(C₁₀H₇O₄)₈(H₂O)₈]. The compound is a 3D coordination polymer composed of centrosymmetric pentanuclear subunits. The antioxidant activity of these compounds was evaluated by assays based on different antioxidant mechanisms of action, i.e., with ^•OH, DPPH^• and ABTS^•+ radicals as well as CUPRAC (cupric ions reducing power) and lipid peroxidation inhibition assays. The pro-oxidant property of compounds was measured as the rate of oxidation of Trolox. The Mg(II) and Mn(II)/Na(I) complexes with isoferulic acid showed higher antioxidant activity than ligand alone in DPPH (IFA, IC₅₀ = 365.27 μM, Mg(II) IFA IC₅₀ = 153.50 μM, Mn(II)/Na(I) IFA IC₅₀ = 149.00 μM) and CUPRAC assays (IFA 40.92 μM of Trolox, Mg(II) IFA 87.93 μM and Mn(II)/Na(I) IFA 105.85 μM of Trolox; for compounds’ concentration 10 μM). Mg(II) IFA is a better scavenger of ^•OH than IFA and Mn(II)/Na(I) IFA complex. There was no distinct difference in ABTS^•+ and lipid peroxidation assays between isoferulic acid and its Mg(II) complex, while Mn(II)/Na(I) complex showed lower activity than these compounds. The tested complexes displayed only slight antiproliferative activity tested in HaCaT human immortalized keratinocyte cell line within the solubility range. The Mn(II)/Na(I) IFA (16 μM in medium) caused an 87% (±5%) decrease in cell viability, the Mg salt caused a comparable, i.e., 87% (±4%) viability decrease in a concentration of 45 μM, while IFA caused this level of cell activity attenuation (87% ± 5%) at the concentration of 1582 μM (significant at α = 0.05).     

A synthetic precedent for the [FeIV2(mu-O)2] diamond core proposed for methane monooxygenase intermediate Q

Intermediate Q, the methane-oxidizing species of soluble methane monooxygenase, is proposed to have an [Fe^IV₂(μ-O)₂] diamond core. In an effort to obtain a synthetic precedent for such a core, bulk electrolysis at 900 mV (versus Fc^+/0) has been performed in MeCN at −40°C on a valence-delocalized [Fe^IIIFe^IV(μ-O)₂(L^b)₂]³⁺ complex (1b) (E_1/2 = 760 mV versus Fc^+/0). Oxidation of 1b results in the near-quantitative formation of a deep red complex, designated 2b, that exhibits a visible spectrum with λ_max at 485 nm (9,800 M⁻¹·cm⁻¹) and 875 nm (2,200 M⁻¹·cm⁻¹). The 4.2 K Mössbauer spectrum of 2b exhibits a quadrupole doublet with δ = −0.04(1) mm·s⁻¹ and ΔE_Q = 2.09(2) mm·s⁻¹, parameters typical of an iron(IV) center. The Mössbauer patterns observed in strong applied fields show that 2b is an antiferromagnetically coupled diiron(IV) center. Resonance Raman studies reveal the diagnostic vibration mode of the [Fe₂(μ-O)₂] core at 674 cm⁻¹, downshifting 30 cm⁻¹ upon ¹⁸O labeling. Extended x-ray absorption fine structure (EXAFS) analysis shows two O/N scatterers at 1.78 Å and an Fe scatterer at 2.73 Å. Based on the accumulated spectroscopic evidence, 2b thus can be formulated as [Fe^IV₂(μ-O)₂(L^b)₂]⁴⁺, the first synthetic complex with an [Fe^IV₂(μ-O)₂] core. A comparison of 2b and its mononuclear analog [Fe^IV(O)(L^b)(NCMe)]²⁺ (4b) reveals that 4b is 100-fold more reactive than 2b in oxidizing weak CH bonds. This surprising observation may shed further light on how intermediate Q carries out the hydroxylation of methane.     

Dehydration Process of Hofmann-Type Layered Solids

In the present work the dehydration process of layered solids with formula unit M(H₂O)₂[Ni(CN)₄]·nH₂O, M = Ni, Co, Mn; n = 1, 2, 4 is studied using modulated thermogravimetry. The results show that water molecules need to overcome an energetic barrier (activation energy between 63 and 500 kJ/mol) in order to diffuse through the interlayer region. The related kinetic parameters show a dependence on the water partial pressure. On the other hand, X-ray diffraction results provide evidence that the dehydration process is accompanied by framework collapse, limiting the structural reversibility, except for heating below 80 °C where the ordered structure remains. Removal of water molecules from the interlayer region disrupts the long-range structural order of the solid.     

A Simple and Efficient Method for Preparing High-Purity α-CaSO4·0.5H2O Whiskers with Phosphogypsum

A simple and efficient approach for the high-purity CaSO₄·2H₂O (DH) whiskers and α-CaSO₄·0.5H₂O (α-HH) whiskers derived from such phosphogypsum (PG) was proposed. The impact of different experimental parameters on supersaturated dissolution–recrystallization and preparation processes of α-CaSO₄·0.5H₂O was elaborated. At 3.5 mol/L HCl concentration, the dissolution temperature and time were 90 °C and 20 min, respectively. After eight cycles and 5–8 times cycles, total crystallization amount of CaSO₄·2H₂O was 21.75 and 9.97 g/100 mL, respectively, from supersaturated HCl solution. The number of cycles affected the shape and amount of the crystal. Higher HCl concentration facilitated CaSO₄·2H₂O dissolution and created a much higher supersaturation, which acted as a larger driving force for phase transformation of CaSO₄·2H₂O to α-CaSO₄·0.5H₂O. The HCl solution system’s optimum experimental conditions for HH whiskers preparation involved acid leaching of CaSO₄·2H₂O sample, with HCl concentration 6.0 mol/L, reaction temperature 80 °C, and reaction time 30 min–60 min. Under the third cycle conditions, α-CaSO₄·0.5H₂O whiskers were uniform in size, clear, and distinct in edges and angles. The length range of α-CaSO₄·0.5H₂O whiskers was from 106 μm to 231 μm and diameter range from 0.43 μm to 1.35 μm, while the longest diameter ratio was 231. Purity of α-CaSO₄·0.5H₂O whiskers was approximately 100%, where whiteness reached 98.6%. The reuse of the solution enables the process to discharge no waste liquid. It provides a new reference direction for green production technology of phosphogypsum.     

Insights into the P-to-Q conversion in the catalytic cycle of methane monooxygenase from a synthetic model system

For the catalytic cycle of soluble methane monooxygenase (sMMO), it has been proposed that cleavage of the O–O bond in the (μ-peroxo)diiron(III) intermediate P gives rise to the diiron(IV) intermediate Q with an Fe₂(μ–O)₂ diamond core, which oxidizes methane to methanol. As a model for this conversion, (μ–oxo) diiron(III) complex 1 ([Fe^III₂(μ–O)(μ–O₂H₃)(L)₂]³⁺, L = tris(3,5-dimethyl-4-methoxypyridyl-2-methyl)amine) has been treated consecutively with one eq of H₂O₂ and one eq of HClO₄ to form 3 ([Fe^IV₂(μ–O)₂(L)₂]⁴⁺). In the course of this reaction a new species, 2, can be observed before the protonation step; 2 gives rise to a cationic peak cluster by ESI-MS at m/z 1,399, corresponding to the {[Fe₂O₃L₂H](OTf)₂}⁺ ion in which 1 oxygen atom derives from 1 and the other two originate from H₂O₂. Mössbauer studies of 2 reveal the presence of two distinct, exchange coupled iron(IV) centers, and EXAFS fits indicate a short Fe–O bond at 1.66 Å and an Fe–Fe distance of 3.32 Å. Taken together, the spectroscopic data point to an HO-Fe^IV-O-Fe^IV = O core for 2. Protonation of 2 results in the loss of H₂O and the formation of 3. Isotope labeling experiments show that the [Fe^IV₂(μ–O)₂] core of 3 can incorporate both oxygen atoms from H₂O₂. The reactions described here serve as the only biomimetic precedent for the conversion of intermediates P to Q in the sMMO reaction cycle and shed light on how a peroxodiiron(III) unit can transform into an [Fe^IV₂(μ–O)₂] core.     

Titanium(IV) Oxo-Complex with Acetylsalicylic Acid Ligand and Its Polymer Composites: Synthesis,Structure, Spectroscopic Characterization,and Photocatalytic Activity

The titanium oxo complexes are widely studied, due to their potential applications in photocatalytic processes, environmental protection, and also in the biomedical field. The presented results concern the oxo complex synthesized in the reaction of titanium(IV) isobutoxide and acetylsalicylic acid (Hasp), in a 4:1 molar ratio. The structure of isolated crystals was solved using the single-crystal X-ray diffraction method. The analysis of these data proves that [Ti₄O₂(OⁱBu)₁₀(asp)₂]·H₂O (1) complex is formed. Moreover, the molecular structure of (1) was characterized using vibrational spectroscopic techniques (IR and Raman), ¹³C NMR, and UV–Vis diffuse reflectance spectroscopy (UV–Vis DRS). The photocatalytic activity of the synthesized complex was determined with the use of composite foils produced by the dispersion of (1) micrograins, as the inorganic blocks, in a polycaprolactone (PCL) matrix (PCL + (1)). The introduction of (1) micrograins to the PCL matrix caused the absorption maximum shift up to 425–450 nm. The studied PCL + (1) composite samples reveal good activity toward photodecolorization of methylene blue after visible light irradiation.     

Reversible Redox Property of Co(III) in Amorphous Co-Doped SiO2/γ-Al2O3 Layered Composites

This paper reports on a unique reversible reducing and oxidizing (redox) property of Co(III) in Co-doped amorphous SiO₂/γ-Al₂O₃ composites. The Fenton reaction during the H₂O₂-catalyzed sol–gel synthesis utilized in this study lead to the partial formation of Co(III) in addition to Co(II) within the composites. High-resolution transmission electron microscopy (HRTEM) and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) analyses for the composite powder sample with a composition of Al:Si:Co = 85:10:5 showed the amorphous state of the Co-doped SiO₂ that modified γ-Al₂O₃ nanocrystalline surfaces. In situ X-ray absorption fine structure (XAFS) spectroscopic analysis suggested reversible redox reactions of Co species in the composite powder sample during heat-treatment under H₂ at 500 °C followed by subsequent cooling to RT under Ar. Further analyses by in situ IR spectroscopy combined with cyclic temperature programmed reduction/desorption (TPR/TPD) measurements and X-ray photoelectron spectroscopic (XPS) analysis revealed that the alternating Co(III)/(II) redox reactions were associated with OH formation (hydrogenation)-deformation (dehydrogenation) of the amorphous aluminosilicate matrix formed in situ at the SiO₂/γ-Al₂O₃ hetero interface, and the redox reactions were governed by the H₂ partial pressure at 250–500 °C. As a result, a supported mesoporous γ-Al₂O₃/Co-doped amorphous SiO₂/mesoporous γ-Al₂O₃ three-layered composite membrane exhibited an H₂-triggered chemical valve property: mesopores under H₂ flow (open) and micropores under He flow (closure) at 300–500 °C.